Vsom 7.0 Camera Recording Bug on vmware

Hello,
One of our installation we have a vsom and one media server on a ucs-c-220 and they are all running on two virtual deployed part. In the architecture we have 20 indoor Nd outdoor 6400 and 6020 sweries cameras and they are all recording to a netapp with iscsi all cameras are recording 1080p and 10 fps but 4 cameras are deleting  from last 5 hours. When we choose other caneras they are recording overall 20 days but these 4 cameras Re recording only last 5-6 hours. Is there any one who live this problem?

For those with similar issues in the future as it looks like this is a dated issue at this point.
Are these four cameras located on the same media server? If so please follow steps below
Please check the media partition those specific cameras are being saved to which are found in
https://<VSMS_ip_address>/vsmc   --> Monitor  --> Media Server --> Recordings
note the media#/####    the "Media#" indicates the partition
then in VSOM click on System Settings tab then Servers link
select the server the cameras are located on
In the services section select the advance clipboard on the Media Server row
Then here you will be able to coorelate the "Media#" partitions and see if they are full or close to the thresh hold you set
If your media partitions are well below your set thresh holds please open a TAC case so we can dig deeper

Similar Messages

  • Multiple camera recording question

    Ok so if i have multiple cameras and one of them triggers and is recording can another record at the same time.  it looks like when this happens i lose a video.  the triggers are all in the activioty log but no video is there to see.
    Al

    From my experience the cameras record independently. The motion sensor mode however is not enough for consistent recordings with the wireless cameras. I had to create a second timed mode for each wireless camera and set it to run all day. The issue I have now is consistently viewing the recordings. I keep getting an "unable to play" message! always something!

  • Looking for forums for Sony digital video camera recorder DCR-TRV 11

    I've been thinking hard and decided that I WILL use my Sony digital video camera recorder DCR-TRV 11. (I was being tempted by a smaller Sony that has a 40x optical zoom.
    Question: Do you know of where I can find a good forum for this brand and model? I Googled it but would like personal recommendations.
    Thank you.
    -L

    Bengt Wärleby wrote:
    Hi
    Don't know of any other forum else this (and FinalCut)
    Your Camera NEED an FireWire-Cable FW-800 <--> 4-pin or FW-400 <--> 4-pin
    I have a FireWire cable.
    The supplied USB-Cable will not work with iMovie or FinalCut - Sorry.
    Yours Camera also can record Audio as 12-bit or 16-bit Audio.
    Please - SET IT TO 16-bit (now) - else severe audio sync problems in iMovie
    (FinalCut - might be able to Capture 32kHz audio)
    How do I set my Sony digital video camera recorder DCR-TRV 11 to 16-bit?
    Also, I do not have or use Final Cut.
    Thank you for the warning about 16 bit. I wish you would tell me why it is important to set to 16 bit, though.
    Thank you,
    -L
    Yours Bengt W
    Don't know of any other forum else this (and FinalCut)
    Your Camera NEED an FireWire-Cable FW-800 <--> 4-pin or FW-400 <--> 4-pin
    The supplied USB-Cable will not work with iMovie or FinalCut - Sorry.
    Yours Camera also can record Audio as 12-bit or 16-bit Audio.
    Please - SET IT TO 16-bit (now) - else severe audio sync problems in iMovie
    (FinalCut - might be able to Capture 32kHz audio)

  • Pan and Tilt Camera Recording Duration

    Whenever my Pan and Tilt camera motion sensor goes off, it only records 12 seconds and not the full 30 seconds it should.  My other regular inside camera records motion for the full 30 seconds.
    Anyone else notice this?  I've looked for a setting but as of yet have not found one to change.  If you know of one please let me know.
    The time stamps on my email notifications show 20 seconds (28:50 - 29:10) but as you can see on the screen snapshot, it only shows 12 seconds.  Just to say it before someone asks, yes the 12 seconds is the total time and not the remaining time.  Sorry I just had to add that.

    I use to have the same problems and found a solution. try this:
    1. Export via Final Cut Pro using a quicktime export (not quicktime conversion!) Use your current settings. Now you should have a full quality exported Quicktime file.
    2. From there, open DVD SP and go to your preferences. Click on the encode tab and set your SD encoding settings. I advise using
    2 Pass VBR Best
    Avg Bit Rate 5
    Max Bit Rate 7 (I dont see the need for 9 as I have been told 7 does a similar job and saves room for audio bit rate)
    Motion Estimatio: best
    I like to set it for background encoding as well, but you can encode on build too.
    3. Click the apply button
    4. Now, bring in you full export file from step 1. You will see the progress in your asset tab (if you background encode). Done!
    This should work for you as it has for me. I think the reason is because DVD SP does hardware encoding rather than software encoding, but this is only my guess. And FYI, compressor is completely fixed on mpeg2 encoding in version 3, but I still find myself using the above route simply because it has never failed me and is much more reliable.
    Hope this works.

  • Cannot found url error when i try to play my camera recorded video from my iphone 4S running ios 5.01

    I got an error cannot Find url when i attempt to play my camera recorded video from my iphone 4S 32 gig. I try to restart my phone but still no luck. There was no problem previously, but suddenly i got this problem with no reason. I also unable to copy the video to my computer using itunes. So please helppp...
    Thanks a ton!!
    Note: My iphone 4S is running ios 5.01.

    See if it helps to delete the firmware file and download a new one:
    Rename, move, or delete the iOS software file (.ipsw)
    iTunes uses "ipsw" files to restore your iPod or iPhone. If those files are unusable, then try deleting them, renaming them, or moving the file to a different directory. This will cause iTunes to download a new copy of the IPSW. When a restore issue is specific to a user, it is likely due to an unusable .ipsw file. If removing the .ipsw file does not resolve a user-specific restore issue, then the issue is caused by other user-specific security software settings or iTunes preferences. Creating a new user will also cause new .ipsw restore files to be downloaded in the new user. You can find the ".ipsw" files in these locations:
    Mac OS X
    iPhone
    ~/Library/iTunes/iPhone Software Updates
    iPad
    ~/Library/iTunes/iPad Software Updates
    iPod touch
    ~/Library/iTunes/iPod Software Updates
    Note: The tilde "~" represents your Home directory.

  • Skip forward on active recording bug is back!

    You remember?  The one where you go to skip forward on an internet channel recording and instead it throws you back to much earlier in the recording?  Well it is back.  Just had it while chase playing the Chelsea v Everton match on BT Sport 1 and went to skip over the half-time punditry.
    You have to wonder if whatever they did to fix the two minute recording bug has broken this again.

    It was never fixed as far as I am concerned. I have always had it, whenever you get to within 10 or 15 minutes of the live the first time you hit ff it jumps back 10 minutes.

  • How can I get the "Multi-Camera Record" button to show up in the Multi-Camera editor?

    I've used the Multi-Camera editor in Premiere for years but in the most recent update (Adobe Premiere Pro CC 2014) I can't get the Multi-Camera Editor to record my camera switches. I looked for the Multi-Camera Record button but it wasn't where it used to be, and even when hitting the plus sign to add more buttons it does not appear in that menu either.
    What am I missing here? Please help. Thank you.

    Did you try it in the program monitor?

  • HV20 Camcorder Camera/Record Mode shows intermittent black & white fuzzy screen

    I rarely use this camcorder since owning it and most of the time it's stored in its camcorder bag until the next big special event (e.g. a wedding). It is very well taken care of and looks like new. One day I took it out to check on and playing back recorded videos on the minidv tapes were fine, clear and perfect. However, once I switch the mode to Camera/Recording mode, the screen changes to a fuzzy black & white screen, then fades into another black & white screen, then fades into a perfect color screen, and then back to fuzzy black & white screen again. The screen continually cycles like this nonstop. I tried recording a random video (see attached youtube video link: http://youtu.be/akR8OGsIEaY) to see if playing it back would be perfect and the playback video was exactly what I recorded... fuzzy black & white screen intermittently changing in and out. I again left the camcorder in storage until today when I wanted to use it for a wedding tomorrow. I searched for troubleshooting help and many people seem to suggest a head cleaner. I found one from RadioShack and ran it through the camcorder but the Camera/Record mode is still the same. What is wrong with my camcorder? I take really good care of it and rarely use it. Do I need to send it in for repair? If so, what are the steps and process for doing so? Thank you in advance.

    It may be time to send the camera in, or maybe put it to rest and think of upgrading. I only use my HV30 as an AV/DV converter now, and haved moved on to an HFM40, I bought one here at Canon, refurbed, great camera, great price.
    I'll watch this thread, though, for updates. There is another forum, though, dedicated to the HV20-30-40. You might find some very interesting things there, and answers. I won't post the link here, but if you Google HV20-30-40, you'll find it.

  • Isight camera recording left to right in photobooth

    Please Help my isight camera is recording left to right in photobooth

    Hello Romeromckay
    but its flipped when i do movies i need it normal for movies LOL ???
    Only Photo Booth flips video clips. LOL ??? Neither iMovie nor QuickTime Pro flip video recordings. Use one of them if you want the video recorded right-way-around.
    If you want to use Photo Booth to make the video clips, you can still turn them around _after they are recorded_ as explained in the link that Defcom provided earlier, but you will need to click on the link and follow those instructions.
    EZ Jim
    G5 DP 1.8GHz w/Mac OS X (10.5.6) PowerBook 1.67GHz (10.4.11)   iBookSE 366MHz (10.3.9)  External iSight

  • Problem camera Recording

    Hello,
    I have a G20 and on the back of it there is a S-video in port. As far as I know i must then be able to record my camcorder vhs films . Using Intervideo windvd does however nothing. Using pinaclle studio 9 recognizes a tv port but stll no images here. I am sure that my vcr is ok. Connecting it with an s-video cable to a flat tv is working fine. I just hoped that (this expensive) notebook would do the things I bought him for. Connecting the camera with the rgb cables does not work either.
    I hope someone found a solution on this.
    many thanks
    Ronny

    Hi Ronny,
    Assuming that you have WinDVD 4 installed, I believe this is only a player rather than a recorder so I would not be surprised that it does not see your input from your VCR.
    Pinnacle, on the other hand should be able to see your S-Video input source. Check the Pinnacle data capture device configuration settings to make sure that it is correctly setting S-Video as the input source rather than Composite (RGB).
    It is also worth checking that the S-Video port on your VCR is actually an output not an input port. Many VCRs have s-video as an input-only option to allow a signal to be recorded on the VCR.
    HTH

  • Is iSight camera recording disabled on the latest version of iMovie for Mavericks?

    Using the latest version of iMovie for Mavericks, can we record directly from iSight camera, or the software only allows videos imported from HD Cameras and PhotoBooth?

    Use the import button.

  • Read extended File Info of a jpg-file from a digital camera (recorded date etc.)

    Viewing stored digital pictures in the Windows Explorer or with Google Picasa you can get additional Informations from the picture file:
    recorded date
    camera name / type etc.
    How can I acces the informations with Labview

    Hi Eldracher,
    i´m not sure if there is a function in labview, but you can load your image as binary and search for your information. See this link for more information about the JFIF (jpg file interchange format) http://en.wikipedia.org/wiki/JPEG_File_Interchange_Format.
    Hope it helps
    Mike

  • 808 Camera Issues/Bugs

    Product - White 808 pureview from France
    Product Code - 059M7Q4
    Software Version - 112.020.0309.C09.01
    Hi all
    I received my 808 on Monday and started snapping away on Tuesday
    I've encountered a few problems
    1) the viewfinder (screen) will go black, I can see the camera UI but I can't see anything else
    If I press down on the camera shutter the 808 will still save the picture of whatever I've being pointing at
    2) everything will be working fine (ui/viewfinder/settings) but the moment I snap a picture nothing will be saved except for a blank/black jpeg file
    this is very very annoying its happened 3x in my use, in succession, and the shot is lost i wasn't able to retake it :/
    I've included the 3 original files of the blank images with the hope that maybe something can be gleaned from them
    3) the Histogram won't always load  when setting the exposure in creative mode
    and
    4) camera lags when the ND Filter is on it isn't able to show on screen the changes in exposure settings
    I've been told some others have had the same issue so hopefully this isnt a defective unit and its something that can be fixed with firmware as Id hate to have to ship my phone off :/
    Attachments:
    2012-07-10-0052.jpg ‏67 KB
    2012-07-10-0053.jpg ‏67 KB
    2012-07-10-0054.jpg ‏67 KB

    Regarding video camera.
    1. Is ND filter available in video camera? I couldn't find it and it definitely should, to prevent excessively high shutter speed, typical for other compact camera video recording
    2. Frame rate. Data from media info:
    Frame rate mode                  : Variable
    Frame rate                       : 24.000 fps
    Minimum frame rate               : 23.962 fps
    Maximum frame rate               : 24.038 fps
    Original frame rate              : 48.000 fps
    Scan type                        : Progressive
    The ideal frame rate should be 23.976 (constant, or at least centred around it), in order to use the footage with other video cameras. It looks the framerate is centred around 24.0.
    I haven't checked 25 and 30fps yet.
    Incidenally Sony Vegas 9.0 shows 100fps under properties of the clip (it was the same for N8).
    These little things would better be resolved if the wonderful camera is to be used for proper video making.

  • IMovie and Digital Camera Recording

    I was able to use a digital video camera as a passthrough to burn copies of old family film (VHS). I am running OS 10.9 and iMovie 10.0.1 and can't get any recorded video. It says it is recording, but I am not getting any available clips from it. Please help.

    The Raw Camera support is not a separate program but is part of the OS. The file is not really all that large in the scheme of things and removing it might impact the operation of your system.
    I would strongly suggest you don't do it. It use to be possible to ignore particular updates, not sure if it is still possible given the whole App Store thing.
    iMovie is a different story. It is a separate application and removing it will not impact the system.
    regards

  • JasperReports Tutorial: Missing Record Bug

    A few customers have pointed out a bug in the Generating Reports and PDFs From a Web Application tutorial at http://developers.sun.com/prodtech/javatools/jscreator/learning/tutorials/2/reports.html. I have to admit that I am somewhat embarrased that I never noticed that the first record is missing from the reports.
    I am trying to get the fix pushed out this week. In the meantime, for those who are using code from the tutorial, you should know that you need to either call beforeFirst() or execute() on the rowset before passing the rowset to the JRResultSetDataSource constructor.

    Thanks

Maybe you are looking for