VSOM Not Showing Disk Usage for Media Servers

I wanted to try and figure out why my Operations Manager is not synchronizing the disk usage of the media servers storage partition. Currently I am running a fully virtualized environment on a Cisco UCS-B series chassis with version VSM 7.5.1 (Redhat 6.4) on my Operations Manager and all of the media servers.
As shown in the image below I am providing an example of the disk usage that shows for one of my media servers in the Operations Manager
Below is the an image of the disk usage shown through CLI of the same server.
As you can see there is a major discrepancy between the 37MB Used(Operations Manager) and the 4.8TB Used(CLI).
Has anyone ran into a similar issue and found a resolution, or know of the scripts on the Operations Manager or the media servers that are responsible for the sychronization of this information.
Thanks,
Michael

Interesting. Thanks for following up and letting us know a punt self-righted it. Have you checked to see if it only updated the once, or is it keeping accurate track now as storage get used?

Similar Messages

IMovie not showing in iDVD's media drawer

Every post similar to mine seems to have solved themselves, but I can't get mine to work.
I have 13 iMovies / Quicktime files in my movie folder; only 11 appear in the iDVD media drawer. I have deleted both iMovie and iDVD's preference files to no avail. Of the 2 movies not showing up in the media drawer, one is the first movie I tried that didn't show up, the second is a 'Save As' duplicate (with only the number '2' at the end of its name). Again, neither of these two show up.
I might add when I created the first one of the 2 that are now not showing up in the media drawer, it too was a 'Save As' - a different version of another movie that IS showing up in the media drawer. I might mention that on my original attempt to save it though, I got an error message from iMovie that there wasn't enough disk space to save it (not true, there were 50 gb left). My second attempt on the 'Save As' did work though, and it runs in iMovie fine.
It's just that neither it, nor its second 'Save As' version '2' show up in iDVD's media pane, even after deleting plist files.
I'm hoping I don't have to do anything that would cause iMovie to render this small 2 minute video. It is built of slides from iPhoto so I don't want the degraded iMovie version of these stills. (I'm also hoping I don't have to re-create it; I got lucky timing the stills and the audio and doubt I could do that again!)
Thanks for any thoughts.
Dennis

Hello Dennis,
I had a similar problem once with a couple of movies i ran though JES Deinterlacer, saving them in the same folder. the original showed up in iDVD, the "processed" version did not.
I don't have an actual explanation, but got it to work by simply dragging the movie into iDVD from the finder.
hope this helps
mish

Not showing Texhnical Usage in MOPZ

Dear Guru's,
I am going to install NW 2004s EHp1 in my existing PI 7.0 system.
It is not showing Texhnical Usage while i created maintance transaction in MOPZ.
Whereas it is showing for my ERP systems(ECC 6.0).
Please let me know,why it is not showing "Technical Usage" in Soultion Manager 7.0 EHp1.
Please suggest how i can procesed.
Thanks & Regrads,
Venkat

Hello there,
The upgrade to Netweaver 7 EHP1 is not supported by Maintenance Optimizer.
Please check http://service.sap.com/solman-mopz for a list of the supported upgrade paths.
Best regards,
Miguel Ariñ

Not enough disk space for asset ecoding

Hi all,
I have a dvdsp project with:
a feature: 3.3 gb
dvd extra: 289
menu assets: 65mb
and shows that it is 3.8 mb all together, but when i try to build/format it stops the build at the menu and gives the error message: Not enough disk space for asset encoding. I was running a test build when this happened. i have yet to add the audio for the extra thinking i still had some room on here to work with.
I have burned dvd's up 4.5 without any issues. any ideas why this is happening?
thanks,
Mark

I'm having the same problem. Except I have tried to switch locations for the Current Build and each time it says Not enough disk space for asset encoding. I have a 500GB raid with almost 400GB free and then another 500GB raid with about 130GB free. I really need help on this pronto!
Another message it now brings up after it starts Encoding Assets: Insufficient disk space for encoding. Please free up disk space on your encoding target drive. Please Help!!
Message was edited by: PapaSnowSmurf

Phone will save ringtones/pictures but not show them in the media folder.

As my subject said, my phone will save pictures and ringtones, however will not show them in the media folder, but if I got through the long way, through the "files" icon in applications all of the new ringtones and pictures are there. So any help would be much appreciated, thank you.

Hello TyRamos and welcome to the BlackBerry Support Community Forums.
Remove your battery followed by your media card.
Reinsert your battery first and allow the device to complete the reboot. Once done, insert your media card. You should get a pop saying media card is inserted.
Go to your Media folder and check for your photos and ringtones.
Let me know how you make out
Thanks
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

After upgrading to iOS 8, the weather app does not show up results for any of the Indian States/cities

After upgrading to iOS 8 on my iPhone 5, the weather app does not show up results for any of the Indian States/cities. Can Apple look into this or does anyone have a solution to this.

Swipe from bottom of days listed ("Wednesday, Thursday, Friday, etc") upwards. I thought it was gone too but it's still there~just takes different way to access it.

My mini with IOS 7.0.6 is not showing an option for wish list in the options. What is happening?

My mini with IOS 7.0.6 is not showing an option for wish list in the options. What is happening?

The three Rs to IOS, try them in order until the issue is resolved;
Restart - Press and hold the Power button until the red Power Off stripe appears. Swipe to power off. Press and hold the Power button to turn the device back on.
Reset - Press & hold the Power and Home buttons simultaneously, ignoring the red power off slider, until the Apple logo appears. Then release both buttons.
Restore - Connect the device to the Mac or PC with which it is usualy synced and use the iTunes app to restore the device to the factory settings. You can then restore the device with a previously made backup or set it up as new.

ORACLE RAC - 11G 2-NODE- OEL , asmdisk listdisk not showing disk in second node

Hi,
i am using vmware to install rac -2node .asmdisk listdisk not showing disk in second node.
my SCSI values are hardware : 0:0
hardware 2 = 1:1
please suggest. do i need to change the above parameter values.

Please elaborate more on this issue. Is this related to EBS? What are you trying to accomplish? Are you following any link/doc?
Thanks,
Hussein

Listener not showing the instance for informix.

Hi All,
I am using oracle gateway 11g and here I just discovered that the one of the database listener not showing the instance for the informix gatways, though it has already configured. whereas on other database , the listner is showing the instances for informix database. it was running fine few days back though.
would appriciate , if you coule let me know that why it suddenly stop responding ?
----------------- OK Listener ----------------------------
ptmsap> lsnrctl status LISTENER_PTMSAP
LSNRCTL for Linux: Version 11.2.0.3.0 - Production on 29-JUL-2012 05:07:07
Copyright (c) 1991, 2011, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=TCP)(Host=10.222.68.34)(Port=1621))
STATUS of the LISTENER
Alias                     LISTENER_PTMSAP
Version                   TNSLSNR for Linux: Version 11.2.0.3.0 - Production
Start Date                19-JUL-2012 10:25:25
Uptime                    9 days 18 hr. 41 min. 41 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   /db/ptmsap11/oracle/product/11.2.0/network/admin/listener.ora
Listener Log File         /db/ptmsap11/oracle/diag/tnslsnr/tbx4new/listener_ptmsap/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.222.68.34)(PORT=1621)))
Services Summary...
Service "MSCARD4" has 1 instance(s).
Instance "MSCARD4", status UNKNOWN, has 1 handler(s) for this service...
Service "as400" has 1 instance(s).
Instance "as400", status UNKNOWN, has 1 handler(s) for this service...
Service "db2test" has 1 instance(s).
Instance "db2test", status UNKNOWN, has 1 handler(s) for this service...
Service "ptmsap" has 1 instance(s).
Instance "ptmsap", status UNKNOWN, has 1 handler(s) for this service...
Service "tg4ifmx" has 1 instance(s).
Instance "tg4ifmx", status UNKNOWN, has 1 handler(s) for this service...
Service "tg4trai" has 1 instance(s).
Instance "tg4trai", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
LISTENER_PTMSAP =
(ADDRESS_LIST =
        (ADDRESS =
          (PROTOCOL = TCP)
          (Host = host_ip)
          (Port = 1621)
SID_LIST_LISTENER_PTMSAP =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = ptmsap)
      (ORACLE_HOME = /db/ptmsap11/oracle/product/11.2.0)
      (PRESPAWN_MAX = 10)
   (SID_DESC=
     (SID_NAME=tg4ifmx)
     (ORACLE_HOME=/db/ptmsap11/oracle/product/11.2.0)
     (PROGRAM=dg4ifmx)
   (SID_DESC=
      (SID_NAME=tg4trai)
      (ORACLE_HOME=/db/ptmsap11/oracle/product/11.2.0)
      (PROGRAM=dg4ifmx)
   (SID_DESC=
     (SID_NAME=db2test)
     (ORACLE_HOME=/db/ptmsap11/oracle/product/11.2.0)
     (PROGRAM=dg4db2)
   (SID_DESC=
     (SID_NAME=as400)
     (ORACLE_HOME=/db/ptmsap11/oracle/product/11.2.0)
     (ENV="LD_LIBRARY_PATH=/db/ptmsap11/oracle/product/11.2.0/dg4db2/driver/lib:/db/ptmsap11/oracle/product/11.2.0/lib")
     (PROGRAM=dg4db2)
(SID_DESC=
    (SID_NAME=MSCARD4)
    (ORACLE_HOME=/db/ptmsap11/oracle/product/11.2.0)
    (PROGRAM=dg4odbc)
    (ENVS=LD_LIBRARY_PATH=/opt/minisoft:/db/ptmsap11/oracle/product/11.2.0)
+++++++ Not OK Listener++++++++++++++++++
LISTENER_SMI =
(ADDRESS_LIST =
        (ADDRESS =
          (PROTOCOL = TCP)
          (Host = host_ip)
          (Port = 1821)
SID_LIST_LISTENER_SMI =
(SID_LIST =
     (SID_DESC=
     (SID_NAME=SMICAN)
     (ORACLE_HOME=/pdsdev/ptmqa/oracle/product/11.2.0/db)
     (ENV="LD_LIBRARY_PATH=/pdsdev/ptmqa/oracle/product/11.2.0/db/dg4db2/driver/lib:/pdsdev/ptmqa/oracle/product/11.2.0/db/lib")
     (PROGRAM=dg4db2)
        (SID_DESC=
        (SID_NAME=SMIINTL)
        (ORACLE_HOME=/pdsdev/ptmqa/oracle/product/11.2.0/db)
        (ENV="LD_LIBRARY_PATH=/pdsdev/ptmqa/oracle/product/11.2.0/db/dg4db2/driver/lib:/pdsdev/ptmqa/oracle/product/11.2.0/db/lib")
        (PROGRAM=dg4db2)
        (SID_DESC=
        (SID_NAME=SMIMEL)
        (ORACLE_HOME=/pdsdev/ptmqa/oracle/product/11.2.0/db)
        (ENV="LD_LIBRARY_PATH=/pdsdev/ptmqa/oracle/product/11.2.0/db/dg4db2/driver/lib:/pdsdev/ptmqa/oracle/product/11.2.0/db/lib")
        (PROGRAM=dg4db2)
        (SID_DESC=
        (SID_NAME=SMIMRKTS)
        (ORACLE_HOME=/pdsdev/ptmqa/oracle/product/11.2.0/db)
        (ENV="LD_LIBRARY_PATH=/pdsdev/ptmqa/oracle/product/11.2.0/db/dg4db2/driver/lib:/pdsdev/ptmqa/oracle/product/11.2.0/db/lib")
        (PROGRAM=dg4db2)
LISTENER_PTMQA11 =
(ADDRESS_LIST =
        (ADDRESS =
          (PROTOCOL = TCP)
          (Host = host_ip)
          (Port = 1521)
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = ptmqa11)
      (ORACLE_HOME = /pdsdev/ptmqa/oracle/product/11.2.0/db)
      (PRESPAWN_MAX = 10)
   (SID_DESC=
     (SID_NAME=tg4ifmx)
     (ORACLE_HOME=/pdsdev/ptmqa/oracle/product/11.2.0/db)
     (PROGRAM=dg4ifmx)
   (SID_DESC=
      (SID_NAME=tg4trai)
      (ORACLE_HOME=/pdsdev/ptmqa/oracle/product/11.2.0/db)
      (PROGRAM=dg4ifmx)
   (SID_DESC=
     (SID_NAME=db2test)
     (ORACLE_HOME=/pdsdev/ptmqa/oracle/product/11.2.0/db)
     (PROGRAM=dg4db2)
   (SID_DESC=
     (SID_NAME=as400)
     (ORACLE_HOME=/pdsdev/ptmqa/oracle/product/11.2.0/db)
     (ENV="LD_LIBRARY_PATH=/pdsdev/ptmqa/oracle/product/11.2.0/db/dg4db2/driver/lib:/pdsdev/ptmqa/oracle/product/11.2.0/db/lib)
     (PROGRAM=dg4db2)
(SID_DESC=
    (SID_NAME=MSCARD4)
    (ORACLE_HOME=/pdsdev/ptmqa/oracle/product/11.2.0/db)
    (PROGRAM=dg4odbc)
    (ENVS=LD_LIBRARY_PATH=/opt/minisoft:/pdsdev/ptmqa/oracle/product/11.2.0/db)
)Regards
Edited by: 937853 on Jul 29, 2012 2:10 AM

thanks all, I was able to solve the issue. it was indeed a port no , which caused this issue.

Chess.app runs OK on my MacBookPro under OS 10.6.8. Under the same OS on my Mac Pro Chess.app will not show the hint for the next move.

Chess.app runs OK on my MacBookPro under OS 10.6.8. Under the same OS on my Mac Pro Chess.app will not show the hint for the next move. The detail on the desktop MacPro is
Model Name:    Mac Pro
Model Identifier:    MacPro1,1
Processor Name:    Dual-Core Intel Xeon
Processor Speed:    2.66 GHz
Number Of Processors:    2
Total Number Of Cores:    4
L2 Cache (per processor):    4 MB
Memory:    1 GB
Bus Speed:    1.33 GHz
Boot ROM Version:    MP11.005C.B08
SMC Version (system):    1.7f10
Serial Number (system):    G87212BJUPZ
Hardware UUID:    00000000-0000-1000-8000-0017F20A3C06

Hello
did the keaybord shortcut work ?
For info chess app come from system install
HTH
Pierre

"not enough disk space for asset encoding" error message

I'm using DVD SP 4.2.1 and trying to burn a DL DVD. Every time I try to build the TS folders somewhere, I get the "not enough disk space for asset encoding" message. I have PLENTY of space (over 100GB) where I'm assigning it to create the TS folders. I don't understand why I'm getting the message. Your help is appreciated.

Max,
I think you're onto something here. I noticed that the original disk (an old Iomega Peerless 20GB removable hard drive) was nearly full. I also saved the DVD Studio Pro file for the project to the same drive. I think that, somehow, the application looked to that drive to do something and got a "disk full" message from that disk and gave me the error.
The workaround was to transfer all the assets AND the project file to another hard disk with plenty of space (over 100 GB). The settings for the DVD Studio Pro encoding process remained the same…my computer's internal hard disk with its 30 GB of free space. I re-linked the assets and the disk building and encoding process went smoothly and I'm now the proud owner of a finished DVD.
There's probably something lurking in the background here, but this worked for me.
Thanks for making the suggestion to look deeper! My problem is solved!
Kevin

Onlive TV listing does not show HD listing for series when I try to create a recording

It happened now already several times the the "Online TV Listing" does not show HD listing for series when I try to create a recording. Instead, it will show two series options in SD. Is this to make people use less bandwidth?
Here is what I am doing:
I go to this link https://www.verizon.com/fiostv/myservices/members/fiostv.aspx
Then to ...........DVR Manger
select ...........Record A Show
I type search e.g. Nathan for You
I click on ........Search
and I select ......Click here to Show Details
Then I get to chose from 2 (the same) SD channels.
Nathan for You
190 Comedy Central
Tue, Jul 29 10:30 PM
Record Show Record Series
Nathan for You
190 Comedy Central
Tue, Aug 05 10:30 PM
Record Show Record Series
But there is the same on channel 690 HD!
This happens not only to this particular channel!
I remember it used to show also the HD channels.
The only way to schedule in HD is to find the listing in the TV schedule, at the right time and there you will get the
correct choices for both SD & HD.
Can this be fixed?
Thanks!

On the right click on HD under video quality to filter it.

Device not showing in iTunes for 'Wi-Fi Sync' and 'Sync Now' on phone only works(appears dark) when plugged in via USB so kinda defeats object. Any ideas please?

Device not showing in iTunes for 'Wi-Fi Sync' and 'Sync Now' on phone only works(appears dark) when plugged in via USB so kinda defeats object. Any ideas please?

Had the same issue. Tried everything that was posted for troubleshooting bye apple and on the discussions.
Finally, tried something that solved it and it works flawlessly now. I changed my wireless router.
I was using my ISP's supplied ZyXEL PN660 ADLS2+ with Wireless N. Swtiched to an older Linksys WRT160N and it is working beautifully now.
Take a look at your router, make sure the firmware is up to date, and that UPnP is enabled, and if all is correct, and you have done everything else, try another Wireless router if you can.

Main Menu:Not enough disk space for asset encoding

i tried to burn my project first i got an error that in track 1 i've got no assets/videos and i added an asset, then a problem with the story and dragged the same story in both columns.. now i tried to burn again and got this error
Main Menu:Not enough disk space for asset encoding
Build cancelled
Building was not successful. See log.
any help appreciated. Thanks in advance

Sounds like your hard drive is getting full. You need as much space on your drive as you can get - at least as much as the disc contents, twice. If you are burning a DVD-R at 4.7Gb then allow ten Gb free space before you start.

MDW Disk Usage for Database Report Error - A data source has not been supplied for the data source DS_TraceEvents

Hello,
On the MDW Disk Usage Collection Set report, I get the following error when I click on a database hyperlink.
A data source has not been supplied for the data source DS_TraceEvents
SQL profiler shows the following SQL statements are executed (I've replaced the database name with databaseX)
1. exec sp_executesql N'SELECT
dtb.name AS [Name]
FROM
master.sys.databases AS dtb
WHERE
(dtb.name=@_msparam_0)',N'@_msparam_0 nvarchar(4000)',@_msparam_0=N'databaseX'
this returns zero rows as databaseX does not exist on my MDW central server, but is a database on a target server (i.e. one that is being monitored and uploaded into the MDW central server).
2. USE [datatbaseX]
this produces the following error:
Msg 911, Level 16, State 1, Line 1
Database 'databaseX' does not exist. Make sure that the name is entered correctly.
why is the report looking for the database on my server?
thanks
Jag
Environment: MDW (Management Data Warehouse) on SQL 2008 R2

Hi Jag,
Based on my test, while this database is offline, we will encounter this issue. This is because that while we click the certain database in “Disk Usage Collection
Set” report, it will query some information with that certain database. If this database is offline, we will not access this database to acquire related information and generates this error.
Therefore I recommend that you check the status of this database by using this system view:
sys.databases. If it is not online, please execute
the following statements in a new window to make this database to be online:
USE master
GO
ALTER DATABASE <database name> SET ONLINE
GO
If anything is unclear, please let me know.
Regards,
Tom Li

VSOM Not Showing Disk Usage for Media Servers

Similar Messages

Maybe you are looking for