VSOM upgarde

can we upgrade vsom from version 7.2.0 to v 7.5 direct ?
can IP camera frame ware work with v7.5 without any problem ?
please your recommendation to upgrade from v7.2.0 to 7.5
system information:
VSOM version is 7.2.0
VSMS version is 7.2.0
IP cameras frame ware is 1.2.1-73
and what this message meaning in attached file

I believe you should be able to upgrade from 7.2.0 to 7.5, but the release notes for 7.5 would indicate for sure. It may be best to go to 7.5.1 as that is now also available. 7.6 is available, but I'd personally wait for a maintenance release before considering moving to it.
As for your camera firmware, again, check the release notes for 7.5/7.5.1 and it will indicate the minimum firmware level they will need to be at. I would personally just upgrade the camera endpoints to the most recent firmware available to be safe.
Best of luck!

Similar Messages

I have a Iphone 4, upgraded to ios 5 with itunes 10.5 Since doing upgarde to both Itunes and Iphone I am not able to add individual songs from my itunes library to my Iphone. I get a grey listing of the song and the sync symbo but it is not moving.

I have a Iphone 4, upgraded to ios 5 with itunes 10.5 Since doing upgarde to both Itunes and Iphone I am not able to add individual songs from my itunes library to my Iphone. I get a grey listing of the song and the sync symbo but it is not moving. Nothing appears on my phone screen. So not able to add music to my phone and its driving me nuts.....

iOS 7 requires iTunes 11.1.

Macbook Pro 10.6.8 RAM Upgarde to 8 GB

I bought a macbook pro 10.6.8 a long time ago and It's working wonderful. I couldn't be happier how fast it is comparing to any other windows computers that I have used in the past. As mather of fact, I have 2 Desktop and 2 Laptops.
I'm a programmer / Web Designer and a Social Media Expert and I was hoping someone can actually enlighten me with some advices regarding this type of mac when it comes to upgrades.
I use a lot of Adobe Programs those days and or some Video Production that require a lot of memory. I was happy with everything untill I decided to upgrade my RAM to 8 GB. Right now those are my computer specifications:
Model Name:
MacBook Pro
Model Identifier:
MacBookPro7,1
Processor Name:
Intel Core 2 Duo
Processor Speed:
2.4 GHz
Number Of Processors:
1
Total Number Of Cores:
2
L2 Cache:
3 MB
Memory:
4 GB
Bus Speed:
1.07 GHz
Boot ROM Version:
MBP71.0039.B0B
SMC Version (system):
1.62f6
Serial Number (system):
34******ATM
Hardware UUID:
I decided to go ahead and buy 8GB or RAM from Amazon. I was very excited when I got them and decided to finally upgrade and this is what happend:
If I pull out the 2 memory sticks of 2GB each and remplace them with the new 4GB Stick each the computer froze. It restart and does not get pass the gray screen with the thing spinning for about 2 minutes before it froze.
If I only pull out one (1) Memory stick of 2GB and remplace it with 4GB, the computer works fine and it restart with no problems and I get 6 GB. After doing the Memtest, everything seems to be functioning properly. But the computer is not any faster nor I see any difference at all.
The only combination that does not function is if I use both 4GB RAM each then as I said it froze. I even called CORSAIR " The place I bought my RAM from and explain to them the ptoblem and they end up sending me another version of the 4GB but it's still the same problem " Frozen ".
A guy I've been talking to had the same issue and end up using 16GB and he told me that his Macbook pro works perfect with the combination of two (2) 8GB RAM together. Doesn't make any sens to me but it still works.
If anyone has encounter a similar problem would you please comment? Thank you all very much!
~John
<Edited By Host>

kwmlr439 wrote:
CSOUND Read the title please:
Re: Macbook Pro 10.6.8 RAM Upgarde to 8 GB
The amount of RAM is not dependant on the operating system. It is all about the model of you Mac.
10.6.8 is the version of OS X that is installed on your system. It has no real baring on the amount of RAM that CAN be installed.
Personally I have never had good luck with Corsair RAM. I have always had good luck with Crucial and Kingston.
Message was edited by: Shootist007
Message was edited by: Shootist007

Attempting to upgarde itunes and I get an error message looking for "an alternate path to a folder containing 'iTunes.msi' location. I've searched my hard drive and the file doesn't exist. What to do?

Attempting to upgarde itunes and I get an error message looking for "an alternate path to a folder containing 'iTunes.msi' location. I've searched my hard drive and the file doesn't exist. What to do?

This worked...found on a prior discussion:
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page)...
http://majorgeeks.com/download.php?det=4459
From the link above (near the top of the page)....Under 'download locations' click on 'download@majorgeeks'
To install the utility, doubleclick the msicuu2.exe file you just downloaded and ran.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Restart your computer.
Re-download Itunes (latest version form Itunes website) and install. It worked!

Steps to upgrade vsom from 6.3 to 7.2

Hi All.
one of our customer needs to upgrade his existing vsom and vsms from 6.3 to 7.2 and he
has purchased the below licenses and he dont need any of the existing data.
L-CPS-M-OM-SW7
L-CPS-M-MS-SW7
L-CPS-M-SASD-7.
as this is the first time I am upgrading to 7.2 can anyone please help me in this regard with simple steps to upgrade to 7.2 and do we need any other things apart from the above licenses

Looking at your licensing, it appears that you have a fairly simple environment. If so, this doesn't have to be complex at all since the customer doesn't need any of the existing data. The simple solution would be to document your settings, approach this as a fresh install, and put your settings back.This will bypass any need for migration tools that might be needed to convert your database and save archives. I have no experience with these tools, so I'm not sure of their full capabilities.
About a year ago, due to learning the system and some poor configuration choices on the disk, I needed to migrate my 7.0 cameras to a new 7.2 system that was configured correctly. Here's how I did it.
1) Document, document, document. Take screenshot of all your settings. Take a backup of the database. Document the number of cameras you have, the number of templates, number of encoders, etc. This data will be used for verification after your migration.
2) Connect to the MySQL database and write queries to obtain the necessary information that is needed to do a bulk import (using Excel) of your cameras, encoders, templates, etc. Below is the SQL I used for my IP cameras. Note: Since analog cameras are configured differently, I used a seperate SQL for these. You should have a seperate SQL for each device type. Copy the results into an Excel spreadsheet.
****** List IP Cameras **********************
select a.name, a.model,
       d.ipaddress,
       e.name as 'Template',
       f.name as 'Server',
       (select name from groupinfo where objectid = a.location_objectid) as 'location',
       (select name from groupinfo where objectid = a.pointtolocation_objectid) as 'pointToLocation'
from camera a,
     networkconfig b, networkconfig_network_interface c, network_interface d,
     devicetemplate e,
     server f
where a.networkconfig_objectid=b.objectid and
      b.objectid=c.networkconfig_objectid and
      a.networkconfig_objectid=b.objectid and
      c.networkinterfaces_objectid=d.objectid and
      a.devicetemplate_objectid=e.objectid and
      a.managedby_objectid=f.objectid and
      a.objecttype=6
order by location;
3) Build out the new system using VMWare (or some other virtualization solution) to test your configurations that you saved in Excel. (This will also let you get the new spreadsheets so you can know what data you need for the import.) This will help you ensure that you do not have any syntax errors. For us, we were migrating from virtual to virtual, so the system we tested on became our new PROD and we simply deleted the old VMs after verifying the new worked. Do not have your cameras run on both systems though. From my experience, you will be fine to pre-provision the cameras to the test system, but do not have streams going to both simultaneously.
4) After you have tested your install and configurations, perform a full install on your Production system and load your configs.
This process worked extremely well for me because we have a fairly simple configuration. All our cameras are Cisco except for a few analog cameras that have been connected to Cisco-encoders. We have only two templates, which we documented manually instead of writing SQL since there were so few. Since we were virtualized, we could easily keep PROD up while we pre-provisioned the new system. If something didn't work, we could easily revert to the old system. I highly recommend testing this in a virtual lab first, because from my experience, I had to go through a couple of iterations in my SQL code to format the data and capture what was needed properly. The syntax can be a bit tricky your first time through. Also, verify (using the 7.2.1) release notes that all your devices are supported and at a supported level of code. For us, some of our cameras were not at supported levels and experienced dropped frames every few seconds until we upgraded these to supported code.
If your config is complex and you don't feel comfortable with the above steps, I recommend going with Scott's solution and seek help from a third party. Also, according to my recent conversation with TAC, skip 7.2.0 and go straight to 7.2.1. Apparently, there was a bad bug in the first one that, if encountered, could result in the loss of archives.
Hope this helps.

Planning book Cell colours are not displayed correctly in upgarded SCM 7.0

Hi All
WE have recently upgarded SCM 4.1 to SCM 7.0 system and I am testing new system. I am stuck in one issue . We have some keys figure rows which are open of inout/output. WE have macros for this key figures to close for certian period. After closing we defined cell Background colour to be same as default colour of other rows in planning book. For SCM 4.1 we used colour no 9 for this.
But in New System SCM 7.0 looks like colour numbers have changed. So I changed macros for background colour , we have an option when changing system gives colour palett and we can select, I tested the whole pallett fo matching colour with default planning book celllc colours- no colour is matching , when I look at palett it looks same but when I select that in macro the shade looks diferent .
Can some one advice how can we get exact colout number to match defult colour of palnning book cells.
Thanks
KV

Hi Kristin,
You can always change the cell color to default by using 0 as argument of the macro function. For instance, the following macro change the color of cell to red if the corresponding prop factor value is negative. On the other hand, for a positive value or zero, the default background color is retained.
Thanks,
Rajesh

Upgarded to PE 13 - How do I drag an image from one screen to another (using 2 monitors)

upgarded to PE 13 - How do I drag an image from one screen to another (using 2 monitors)

upgarded to PE 13 - How do I drag an image from one screen to another (using 2 monitors)

VSOM RTSP

Hi,
Is there a way to subscribe to a CAM's RTSP stream using VSOM? Does the operation manager provide any kind of API to facilitate this?
I know about the CAM API but the problem is that it only works with Cisco IP cameras. I have a few cameras that are attached to the VSOM through and encoders..
Thanks

We can use RTSP interface from the VSMS (Video Surveillance Media Server, not VSOM) to receive video streams via RTSP. Snip from Cisco Video Surveillance Media Server 6.0 version user guide :
http://www.cisco.com/en/US/docs/security/physical_security/video_surveillance/network/media_server/6_0/user_guide/vsms.pdf
To view a live stream the user should enter a URL of the format
rtsp://:554/live/
Example:
rtsp://your-Media-Server.cisco.com:554/live/p_cisco2500Cam15
To view an archive stream the user should enter a URL of the format
rtsp://:554/archive/
Example:
rtsp://your-Media-Server.cisco.com:554/archive/cisco2500Cam15_archive

Vsom 7.2.1 login error

Hi,
I need help with Vsom server,
my vsom was ok and perfect, I just restarted , and now i am having problem with login screen, domain name portion is on searching, and dont let me log in,
i am using vsom 7.2.1,
attached is the screenshot of the error,
will be waiting for kind support,
thanks

Hi Manny,
There are 2 different Common folders. The path I gave is to the User library, that's where you'll find the cache files.
Apple has hidden the User library I beliebe since 10.7. Here's to ways to get there:
Method 1
In the Finder, choose Go > Go To Folder.
In the Go To Folder dialog, type ~/Library
Click Go.
Method 2
Hold down the Alt (Option) key when using the Go menu. The user library folder is listed below the current user's home directory.
Once there follow this path:
Application Support/Adobe/Common
Peter Garaway
Adobe
Premiere Pro

HT1338 I have a Mac pro i believe 2008 and my software is 10.5 i think.. should i upgarde tp 10.6 first and then to OS X Lion?

I have a Mac Pro, i believe from 2008 and my software is 10.5 i think.. should i upgarde to 10.6 first and then to OS X Lion?

You'll need to call the online Apple store, which in the US is at 800-MY-APPLE to buy OS X 10.6 Snow Leopard. Install OS X 10.6, do Software Updates and you'll be at OS X 10.6.8.
Then call the online Apple store again (or when you call them to order 10.6) and purchase a code to download OS X Lion (you can't see it in the App store anymore). In a couple of days, you'll get an email with the code that you can then use to download it from the App store. You need to be at OS X 10.6.6 or better to access the App store.
You'll need 2GB memory minimum for Lion and 4GB is recommended.

After upgard my MacBook OS X version is 10.5.8 now

However it still can't install the Facetime for Mac. Can Facetime be installed on my MacBook?
or should I upgard my MacBook again? and How to upgard?

You can upgrade your OS to 10.6 with a Snow Leopard disk for $29 from Apple or any Apple store as long as you have 1gb of RAM and 5gb free space on your hard drive.
http://store.apple.com/us/product/MC573Z/A?mco=MTY3ODQ5OTY

Hi friends help me i am going to work upgarde project

Hi friends help me i am going to work upgarde project from old version to ECC 6.0
wat are all the problem u face while working upgarde project please me .... as soon as possible
Advanced thanks
Regards,
Nithya.R

Hi Nithya,
In case of technical upgrade you should work on
SPAU (Support package adjustments) -
SPDD (Support package Data Dictionary)
If you have applied any OSS notes to objects in your system, the hot package may overwrite these objects.
SPAU (repository objects), will identify any objects where the hot package is overwriting changes you have made through OSS notes.
You must check all objects identified in SPAU and decide whether you need to reapply the OSS note or reset the code to the original SAP Code.
If, for instance, you are applying hot package 34, SPAU identifies an object where you have applied an OSS note. You must check the OSSs note and see if SAP have fixed that note in a hot package.
If the OSS note has been fixed in hot package 34, then you should reset the object to its original source code. This means that there is no repair flag set against this object again and it is now SAP standard code.
If, however, the object is not fixed until hot package 38, or there is no fix available you have to reapply the OSS note, otherwise users will encounter the problems they had before the note was applied.
You must transport all reapplied notes and Reset to SAP Standard objects after you apply your hot package to your QAS and PRD systems.
Then comes the Zobjects. you have to check them using the TCode Uccheck.
You have to unicode enable all zprograms.
Correct the syntax errors related to this
Replace obsolete function modules like Upload,Download,WS_upload,Ws_download,...
with out changing the old functionality.
Regards,
Charumathi.B.

HT201210 not reading sim card after upgard to ios5.1

I bought an uncontract Iphone 4s in Los Angeles, and actived it in Beijing China by using my sim card of China mobile, and everything works perfect. One day when I connected with Itunes, it asked me to upgard to IOS5.1, I pressed OK, after the upgrade, the iphone could not reading the sim card, I tried restart the 4s and re-insert the sim card, but all failed, and Beijing Apple store said they can not help, I have to go back to US to solve this, quite annoyed.

http://support.apple.com/kb/TS4148

Order of upgarde Oracle 9.0.1.3 to 11g and Windows server 2000 to 2008

Hi
I need help with determining which order I should upgrade my system. I need to upgarde both oracle and os server:
Oracle version 9.0.1.3 to 11g (I know that i will have follow upgrade path as per oracle matrix)
Windows server 2000 - 2008 (I know that i=I need to go to 2003 before 2008)
My question is do I upgrade oracle to 11g first on windows 2000, or upgrade the Windows OS first and then oracle? also what are the implications if any?
Thanks.

Hi;
I need help with determining which order I should upgrade my system. I need to upgarde both oracle and os server:
Oracle version 9.0.1.3 to 11g (I know that i will have follow upgrade path as per oracle matrix)You need to be 9.2.0.8 level to make 11gr2 direct upgrade
My question is do I upgrade oracle to 11g first on windows 2000, or upgrade the Windows OS first and then oracle? also what are the implications if any?I suggest see below notes:
Minimizing Downtime During Production Upgrade [ID 478308.1]
Master Note For Oracle Database Upgrades and Migrations [ID 1152016.1]
Different Upgrade Methods For Upgrading Your Database [ID 419550.1]
Also Please check my blog
http://heliosguneserol.wordpress.com/2010/06/17/move-to-oracle-database-11g-release-2-wiht-mike-dietrich/
In this pdf you can see patch of to upgrade db from x to n wiht many senerios wiht all related metalinks notes which is created by Oracle worker Mike Dietrich
Regard
Helios

Issue after 11g upgarde.

after upgarding to 11g the code piece did not work for some of the records -
forall bulk_index in v_blockBegin..v_blockEnd
save exceptions
insert into ofr_pop_stng( FILE_NM,
OFR_ID,
ACSIN_NB,
FILE_DTL_ID,
ACCT_REF_NB,
LAST_ACSIN_IN,
OPT_FILE_DTL_ID)
select g_DataFileName,
g_offerId,
g_validRecords(bulk_index),
g_fileDetailId,
g_arn_c(bulk_index),
'Y',
g_OPTfileDetailId
from dual
where not exists( select /*+ index(ofr_pop pk_ofr_pop) */
null
from ofr_pop
where ofr_id = g_offerId
and acsin_nb = g_validRecords(bulk_index)
union all
select /*+ index(ofr_pop_stng ofr_pop_stng_idx) */
null
from ofr_pop_stng
where ofr_id = g_offerId
and acsin_nb = g_validRecords(bulk_index));
two issues were found - 1. even though conditions have been identified to make sure if record already exists in ofr_pop and ofr_pop_stng table than should not insrted again
2. Some if the records even though are present in collections did not insert in staging table.
This is really weierd and annoying. A Hight priority ticket has been opened and prod rollback to 10g in progress.

This leads me to believe that your production environment differs from UAT/Dev environments in some way, that is causing this issue (assuming it is a valid issue) to show up consistently in prod and not in other environments. Can you determine what that difference is ?
When the issue showed up in your Dev/UAT environments, what did you do ? Open an SR ? If so, what was the resolution ? If not, why not ?
HTH
Srini

VSOM upgarde

Similar Messages

Maybe you are looking for