VSS error 8193 and 22 by backup task (Windows server 2012)

Hello,
On the WinServer 2012 Std , I am facing VSS error when it starts "system state backup".
The user account of this task is a member of "local Backup operators".
how can I correct this error ?
In the forum, I found a topic that had mentioned regsvr32.
But Microsoft said it does not recommended/ supported for 2008 or later.
http://social.technet.microsoft.com/Forums/office/en-US/2b1f44e0-725a-4fc5-bc1d-69437871fe90/wierd-volume-shadow-copy-service-errors?forum=winserverfiles
-Quote [start]-
Reregistering files was a common way to fix VSS issues back in Windows 2003.  However, due to the changes in Windows 2008 and 2008R2 servicing, reregistering files will either not work or actually damage Windows.
Please discontinue using
regsvr32.
Robert Mitchell Senior Support Escalation Engineer Microsoft Corp.
-Quote [End]-
the detail of event logs are ;
Log Name:      Application
Source:        VSS
Event ID:      22
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:     
Description:
Volume Shadow Copy Service error: A critical component required by the Volume Shadow Copy service is not registered. This might happened if an error occurred during Windows setup or during installation of a Shadow Copy provider. The error returned from CoCreateInstance
on class with CLSID {e579ab5f-1cc4-44b4-bed9-de0991ff0623} and Name IVssCoordinatorEx2 is [0x80040154, Class not registered ].
Log Name:      Application
Source:        VSS
Event ID:      8193
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Description:
Volume Shadow Copy Service error: Unexpected error calling routine CoCreateInstance.
hr = 0x80040154, Class not registered .
Thank you for your support.

Dear Sophia,
Thank you for your instruction, the below is result of vssadmin.
I am using CA Arcserve 16.5 for backing up system state.
Writers
Microsoft Windows [Version 6.2.9200]
(c) 2012 Microsoft Corporation. All rights reserved.
C:\Windows\system32>vssadmin list writers vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001-2012 Microsoft Corp.
Writer name: 'Task Scheduler Writer'
    Writer Id: {d61d61c8-d73a-4eee-8cdd-f6f9786b7124}
    Writer Instance Id: {1bddd48e-5052-49db-9b07-b96f96727e6b}
    State: [1] Stable
    Last error: No error
Writer name: 'VSS Metadata Store Writer'
    Writer Id: {75dfb225-e2e4-4d39-9ac9-ffaff65ddf06}
    Writer Instance Id: {088e7a7d-09a8-4cc6-a609-ad90e75ddc93}
    State: [1] Stable
    Last error: No error
Writer name: 'Performance Counters Writer'
    Writer Id: {0bada1de-01a9-4625-8278-69e735f39dd2}
    Writer Instance Id: {f0086dda-9efc-47c5-8eb6-a944c3d09381}
    State: [1] Stable
    Last error: No error
Writer name: 'System Writer'
    Writer Id: {e8132975-6f93-4464-a53e-1050253ae220}
    Writer Instance Id: {540ecfcf-7f41-43cc-9521-d73d1881b85f}
    State: [1] Stable
    Last error: No error
Writer name: 'SqlServerWriter'
    Writer Id: {a65faa63-5ea8-4ebc-9dbd-a0c4db26912a}
    Writer Instance Id: {1fe1e4af-26ab-4113-8079-2c853e1a32fc}
    State: [1] Stable
    Last error: No error
Writer name: 'ASR Writer'
    Writer Id: {be000cbe-11fe-4426-9c58-531aa6355fc4}
    Writer Instance Id: {8094a9a6-29e1-4276-a8b0-7f9bd34e7ad5}
    State: [1] Stable
    Last error: No error
Writer name: 'WMI Writer'
    Writer Id: {a6ad56c2-b509-4e6c-bb19-49d8f43532f0}
    Writer Instance Id: {3812a483-5e46-4c06-a64d-4caa1184705e}
    State: [1] Stable
    Last error: No error
Writer name: 'IIS Config Writer'
    Writer Id: {2a40fd15-dfca-4aa8-a654-1f8c654603f6}
    Writer Instance Id: {094ddb56-3e9a-452f-951a-22da278d7666}
    State: [1] Stable
    Last error: No error
Writer name: 'Registry Writer'
    Writer Id: {afbab4a2-367d-4d15-a586-71dbb18f8485}
    Writer Instance Id: {4f57f2af-4a0e-443d-ac27-c9b858c50744}
    State: [1] Stable
    Last error: No error
Writer name: 'Shadow Copy Optimization Writer'
    Writer Id: {4dc3bdd4-ab48-4d07-adb0-3bee2926fd7f}
    Writer Instance Id: {54fb8f5c-2dff-479d-8ed1-b7de3c7495c3}
    State: [1] Stable
    Last error: No error
Writer name: 'COM+ REGDB Writer'
    Writer Id: {542da469-d3e1-473c-9f4f-7847f01fc64f}
    Writer Instance Id: {901cd0a6-895a-4942-ac60-c8a6a7796583}
    State: [1] Stable
    Last error: No error
Providers
C:\Windows\system32>vssadmin list providers vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001-2012 Microsoft Corp.
Provider name: 'SmVssProvider'
    Provider type: Hardware
    Provider Id: {24e4e8a3-69cb-4370-8b7b-c5276cd49765}
    Version: 10.84.02
Provider name: 'Microsoft File Share Shadow Copy provider'
    Provider type: Fileshare
    Provider Id: {89300202-3cec-4981-9171-19f59559e0f2}
    Version: 1.0.0.1
Provider name: 'Microsoft Software Shadow Copy provider 1.0'
    Provider type: System
    Provider Id: {b5946137-7b9f-4925-af80-51abd60b20d5}
    Version: 1.0.0.7
Shadows
C:\Windows\system32>vssadmin list shadows vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001-2012 Microsoft Corp.
^C
Since command prompt has no output for 5mins, I pressed CTRL+C
Shadowstorage
C:\Windows\system32>vssadmin list shadowstorage vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001-2012 Microsoft Corp.
No items found that satisfy the query.
Volumes
C:\Windows\system32>vssadmin list volumes vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001-2012 Microsoft Corp.
Volume path:
\\?\Volume{d2760d78-5868-11e3-93e7-806e6f6e6963}\
     Volume name:
\\?\Volume{d2760d78-5868-11e3-93e7-806e6f6e6963}\
Volume path: D:\
     Volume name:
\\?\Volume{88a134c9-020e-4020-8697-dc44c8a3c89a}\
Volume path: C:\
     Volume name:
\\?\Volume{d2760d79-5868-11e3-93e7-806e6f6e6963}\
C:\Windows\system32>

Similar Messages

  • How to create Auto weakly backup in Windows Server 2012

    Hello
           1. I want to set auto backup in windows server 2012 Weakly.
    2. can i Set auto backup like a normal data copy.

    By configuring automatic backup, you can schedule this task according to your choice(weekly/monthly). You can use backup schedule wizard accessed from the Windows Server Backup user interface (Wbadmin.msc).
    To schedule backup task by using powershell, please checkout this link :
    http://technet.microsoft.com/en-us/library/dd759156.aspx
    Also, have a look at here :
    http://technet.microsoft.com/en-us/library/cc770757.aspx

  • Unscheduled additional backups in Windows Server 2012 R2 Essentials

    I have a strange problem since upgrading to Windows Server 2012 R2 Essentials. My server is on a lightly used Home network which I run for two periods totalling 8 hours each day. Whenever the server is re-started it immediately begins a Server Backup;
    not a great problem in itself but the 'unscheduled' backups prevent the Scheduled backup from operating and often cannot complete before the next Shut Down controlled by Task Scheduler. I presume that R2 has added an extra trigger for the Backup but I can
    only find the trigger for my scheduled once-per-day Backup. Can anyone please point me towards the trigger for these unwanted backups. Thanks in advance. Keith Woolf

    Hi,
    Please perform a
    clean boot to troubleshoot
    your issue and check if it caused by other software.
    You may collect some backup logs to narrow down this issue. By default, tracing is enabled in Windows Server Backup to preserve logs. These traces will be present in files
    under the following directory: %windir%\logs\windowsserverbackup
    You can use some tools such as
    tracerpt
    command to export the .etl file into a .txt file. Please check if you can find waht is the root trigger that triggers this unscheduled backup.
    Meanwhile, please check the schedule task for the scheduled backup if it was configured correctly. You can clear up and recreate, then please check if this issue still exists.
    Hope this helps.
    Best regards,
    Justin Gu

  • [Forum FAQ] Introduce Backup in Windows Server 2012 R2 Essentials

    Windows Server 2012 R2 Essentials provides reliable ways to perform regular backups of your server and backups of your network computers.
    1. Server Backup
    Description:
    Backs up your server running Windows Server Essentials. The data is backed up to an external USB drive. You can also perform full system restore of server.
    Operations:
    On Dashboard, please select DEVICES and then navigate to the server which you need to backup. Right click the server and select Set up backup. When set up complete, you will be able to
    Start a backup for the server. (Figure 1)
    Figure 1
    More information:
    Manage server backup in Windows Server Essentials
    Restore or repair your server running Windows Server Essentials

    3. Microsoft Azure Backup
    Descriptions:
    Performs an online backup of files or folders on your server. When you use Azure Backup to back up server data, the information is encrypted by using your passphrase before it is uploaded to a secure datacenter on the Internet.
    Operations:
    1) Open Dashboard and follow the path: HOME-> Get Started-> ADD-INS-> Integrate with Windows Azure Backup. Then as Figure 3 shows, you need to “Click to sign up for Windows Azure Backup” and “Click to download Windows Azure
    Backup integration module”.
    Figure 3
    Please note: when you click to download, you may encounter the issue as Figure 4 shows. If so, please follow the path:
    Tools-> Internet Options-> Security->
    Trusted sites-> Add this website to the zone and add
    http://downlaod.microsoft.com,
    https://activedirectory.windowsazure.com in Trusted sites in IE. (Please uncheck
    Require server verification (https:) for all sites in this zone). Then please check if you can download as normal.
    Figure 4
    2) After you download the OnlineBackupAddin, please run it. Then begin to install the add-in. (if any issue occurs in your installation of add-in, please navigate to C:\PrgramData\Microsoft\Windows Server\Logs folder and check
    InstallAddin log file if you can find some clues.)
    3) During your installation, KB 2873390 may be required. Please download the update package and run it. Then Windows Azure Backup Agent Upgrade Wizard appeared. Please follow it and complete as Figure 5
    and Figure 6 show.
    Figure 5
    Figure 6
    4) Then please re-open Dashboard, you will find ONLINE BACKUP option. (Figure 7) There will be three steps that you need to do: (i)
    Upload a certificate. (ii) Register your server.
    (iii) Configure backup settings.
    Figure 7
    (i). Upload a certificate. (In this example, we use the second option: Upload certificate to Windows Azure Backup vault)
    Please logon Windows Azure, select RECOVERY SERVICES and click
    NEW. Follow the path: RECOVERY SERVICES-> BACKUP VAULT->
    QUICK CREATE. Please type NAME and select
    REGION, then click CREATE VAULT. When create completes, please click the name of this new recovery service that you create. As Figure 8 shows. Then select Manage Certificate to add or update the certificate file (.cer) that contains
    a public key for the vault. The certificate is used to register servers with the vault.
    Figure 8
    (ii). Register your server
    On Dashboard, navigate to Online Backup and click Register. (Figure 9)
    Figure 9
    Then it will check the certificate. And then you need to set a passphrase to secure your data. (Figure 10)
    Figure 10
    When you set passphrase complete, please click Next to continue. When register successfully. You will see Figure 11.
    Figure 11
    (iii). Configure backup settings
    When register completes, please click Configure Online Backup. Then you can follow the Configure Online Backup wizard to configure online backup (add folders), specify the backup schedule, specify the backup retention policy and choose bandwidth usage. The
    all process will be shown in Figure 12-16.
    Figure 12
    Figure 13
    Figure 14
    Figure 15
    Figure 16
    After all configurations complete, you will be able to see that the server integrates with Windows Azure Backup. (Figure 17)
    Figure 17
    On the Dashboard in server essentials, you will be able to start backup online. (Figure 18)
    Figure 18
    After backup online, you will see the protected data as Figure 19 and Figure 20 show in Dashboard and Windows Azure.
    Figure 19
    Figure 20
    More information:
    Manage Online Backup in Windows Server Essentials

  • Unable to install WSUS Updates KB720211 x64 and KB2734608-x64 on windows server 2012 r2 standard

    Hi,
    Am testing SCCM 2012 R2 in virtual environment. To handle Windows 8 clients, need to install KB2734608 update, which is failing.
    Not able to install WSUS Updates KB720211 x64 too. The server is on Windows Server Standard 2012 R2 x64.
    Any help will be appreciated.

    Hi,
    Agree with Michael. KB2734608 is applied to the WSUS 3.0 SP2. If we install the WSUS on Windows Server 2012 or later, the version of the WSUS becomes to v6.
    Best Regards.
    Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Printing Problem with Epson LX-300+ii and LX-310 in Windows Server 2012 R2 64-bit

    I recently installed Windows Server 2012 R2 64-Bit.
    We have Printer Epson LX-300+ii and LX-310 (dot-matrix) that we share among users. Each user access the Server using Remote Desktop. From previous experience with Windows Server 2008, I knew that these printers will be problematic, especially regarding
    the Easy Print driver.
    And I was right, using the Easy Print driver, I got the following result:
    And so, I did manual mapping & disable the "Use Remote Desktop Easy Print printer driver first". Haha, what a surprise, I got the following result:
    And so I uninstalled the printer driver, and install it again, thinking that I might chose a wrong driver, but.... same result. I know for sure that I chose the correct driver.
    Next, I tried connecting the printer DIRECTLY to the server. Log-in to the Server directly,
    not using Remote Desktop. And tried printing again, haha... really... what a surprise... I got the same problem here !!!
    So now I know the problem is not the Easy Print driver, not mapping or registry problem either. It's the print driver. This is SUPER FRUSTRATING, I tried the same driver from the same CD in Windows 8.1 64-Bit with no problem. I tried it too in Windows 7
    32-Bit with no-problem either. But somehow, this driver is problematic in Windows Server 2012 R2.
    Any help? Anybody else bump into this same problem ? I'm close to giving up, been spending too much time figuring out this damn thing.
    Andy

    Hi Bulent Sahin,
    Thank you for your reply, I tried IBM Graphics driver, but the result is equally as bad. But your answer inspire me to try different drivers. And so, the closest & best driver that I could use now is EPSON ESC/P 9pin V4 Class Driver
    It's not as good as I would expect, but at least now, it's acceptable & readable. I can't believe that I'm the only one who have this problem
    Thank you Mr. Sahin

  • Error when run adobe livecycle trial windows server 2012

    hi i got this error when i try to install adobe livecycle :
    invocation of this java application has caused an invocationtargetexception
    when i click more details it show this :
    ZeroGu2: Windows DLL failed to load
              at ZeroGa2.b(DashoA10*..)
              at ZeroGa2.b(DashoA10*..)
              at com.zerog.ia.installer.LifeCycleManager.b(DashoA10*..)
              at com.zerog.ia.installer.LifeCycleManager.a(DashoA10*..)
              at com.zerog.ia.installer.Main.main(DashoA10*..)
              at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
              at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
              at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
              at java.lang.reflect.Method.invoke(Method.java:597)
              at com.zerog.lax.LAX.launch(DashoA10*..)
              at com.zerog.lax.LAX.main(DashoA10*..)
    system :
    adobe livecycle es 4 trial jboss
    windows server 2012
    jdk 1.7
    jre 7
    Regards

    ES4 is not supported on Windows Server 2012. Please check platform matrix @ http://helpx.adobe.com/livecycle/help/livecycle-es4-supported-platforms.html
    Thanks,
    Pankaj Parashar

  • Forest and domain functional level Windows Server 2012 R2 - what's new?

    Hi, I still can't find documentation about the new domain and forest functional levels in WS 2012 R2.
    a) "What's New in Active Directory in Windows Server 2012 R2"
    http://technet.microsoft.com/en-us/library/dn268294.aspx
    No word about it.
    b) "Understanding Domain and Forest Functional Levels"
    http://technet.microsoft.com/en-us/library/cc771294.aspx
    Still WS 2012.
    Thorsten

    For what's New in Active Directory in windows server 2012 R2,
    Read the following Blog
    http://policelli.com/blog/archive/2013/06/27/whats-new-in-active-directory-in-windows-server-2012-r2-preview/
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer".

  • Error creating VM on Hyper-V Windows server 2012 R2 (0x80070569).

    I recently installed in my domain a member server 2012 r2 with Hyper-V Role, and got the following error when creating a new vm:
    Logon failure: the user has not been granted the requested logon type at this computer.(0x80070569).
    The user is momber of Domain Admins group and is logged on the server. I noted that the domain admins group has not the right "log on as a batch Job". Is this right required to create vm ? What are the others requirements to install and admin virtual
    machines in Hyper-V?

    Hi Claudio,
    "As Microsoft recommended 'best practice' for Hyper-V servers is to not install any additional Roles or Features that do not specifically support virtualization. As an example, in a Hyper-V Cluster, the Hyper-V Role and the Failover Clustering feature are
    installed to support highly available virtualized workloads. Hyper-V hosts play a critical role in an organizations' virtualization strategy. Microsoft recommends that the Hyper-V servers be managed in a separate OU in Active Directory (if they are domain-joined).
    Only group policies that apply specifically to Hyper-V host machines should be applied to this OU. This minimizes the risk of a policy conflict affecting the proper functioning in a Hyper-V host. "
    For details please refer to following link:
    http://support.microsoft.com/kb/2779204/en-us
    Best Regards
    Elton JI
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Using and synchronizing applications from Windows Server 2012 on local desktop

    I have Visual Studio 2010 on my remote server.  How do I use Visual Studio  software from the server on my local laptop and sync it with the server?

    Of course remote desktop assumes that the system is also properly licensed for Remote Desktop Connections.
    A little clarification on the OP's request might also be in order.
    "How do I use Visual Studio  software from the server on my local laptop and sync it with the server?"
     If you want to run VS on the server, using something like remote desktop services, it runs there and the data stays there.  Obviously you can redirect where VS will store data so that it stores data on your laptop, but then there is nothing to
    automatically synchronize it.  Maybe a more complete explanation of your issue would help.
    . : | : . : | : . tim

  • SharePoint 2010 search error on searchadministration.aspx page in Windows Server 2012

    Hi,
    I am facing the below error on when I click on any of the page under the Search Serve
    System.ArgumentException: Could not find the sitemap node with URL '/searchadministration.aspx'. at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.ErrorHandler(Object sender, EventArgs e) at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.OnError(EventArgs e) at System.Web.UI.Page.HandleError(Exception e) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest() at System.Web.UI.Page.ProcessRequest(HttpContext context) at ASP._admin_search_listcontentsources_aspx.ProcessRequest(HttpContext context) at ... 29b1b089-c6d3-4276-aeba-c1fb063c524b
    08/12/2014 10:48:36.04* w3wp.exe (0x538C) 0x0244 SharePoint Foundation Runtime tkau Unexpected ...System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) 29b1b089-c6d3-4276-aeba-c1fb063c524b
    08/12/2014 10:48:36.04 w3wp.exe (0x538C) 0x0244 SharePoint Foundation Monitoring b4ly Medium
    I got the correlation ID and upon checking this was the error that I got.

    Hi Cally,
    As I understand, you encountered the issue when you accessed Search Service Application.
    Did you install any updates recently? Does it work before? Could you find more related error message?
    Please go to CA > Application Management > Manage service on this server, restart search service. Then go to Services.exe on the SharePoint machine, and restart SharePoint 2010 Timer and SharePoint Sever Search 14 services.
    In addition, here is an article with similar issue for your reference:
    http://akifkamalsyed.wordpress.com/2008/09/19/errors-after-installing-infrastructure-update-for-moss-2007/
    Regards,
    Rebecca Tu
    TechNet Community Support

  • How do I setup Active Directory and Group Policy on Windows Server 2012?

    I work for a school district that uses a Windows 2012 server with about 400 Windows 7 PCs and 150 Mac PCs. We are set up with Roaming Profiles on the PCs and would like to be able to setup Active Directory, Group Policy, and Roaming Profiles on our macs. (We also have a mac server that they are using as a file server only) As we are a school, our funds are very low. Now for the questions...
    Is there a software that allow us to accomplish this?
    Is there a free solution or a very reduced price option to do this?
    I heard that http://www.centrify.com/products/mac-edition.asp may accomplish this and I read something about it on here but didn't know if this is what I was really trying to do becuase it was marked as "The Golden Triangle" and did not mention Raoming Profiles. This is the link though: https://discussions.apple.com/message/17200059#17200059
    Any help would be greatly appreciated.

    The above reply does not take into account that I am trying to use GROUP POLICY EDITOR to make it the default browser.

  • Error message when accessing Cluster Manager (Windows Server 2012-based) console from a Windows 8 system

    Hi all;
    Please look at the following figures:
    Any ideas?
    Thanks
    Please VOTE as HELPFUL if the post helps you and remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
    the thread.

    Hi,
    I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
    Thanks for your understanding and support.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Can't connect Windows 8.1 Enperprise to Windows Server 2012 Essentials. Get a Digest Login page and then a Blank with HTTP 404 Error page. Need help!

    Hi,
    I have make a new and clean install of Windows Server 2012 R2 Essentials on my office network server and then i made a new and clean install of Windows 8.1 Enterprise version on one of my office desktops.
    After all VPN and Anywhere Access where setup on the server i when to a PC that is inside my office network and browse on Internet Explorer to the URL to connect this PC to the server and make it part of the domain.
    But when i browse to the http://MYSERVERNAME/connect im not getting the Windows Server page with the option to download the windows connector. Instead i get a login pop-up saying "iexplore" and "digest". I try to create a user on the server
    and use that user login details on this login box, but even then, the only thing i get is a blank page saying a HTTP Error 404.
    So can someone please help me on this? Any advice on how to solve this problem in order to show the normal Windows Server connect page? 
    Thanks

    Hi,
    Based on your description, please refer to following operations and troubleshoot this issue. Then check if
    can help us to narrow down the cause of this issue.
    Please type
    http://server-IP-address/connect in IE. Then check if encounter the same issue.
    On the Windows Server 2012 R2 Essentials, please open Internet Information Services (IIS) Manager. Navigate to Sites, then right click Default Web Site and select
    Edit Bindings… In Site Bindings, select Port 80 and click “Edit…” button. Would you please provide a screenshot of the Edit Site Binding (Port 80) that you can see?
    Then please click
    Connect which in the list of Default Web Site. In the mid panel, select
    .NET Authorization Rules and double click it. Then please check if all users were allowed.
    By the way, would you please provide a screenshot of the login page when you browser
    http://servername/connect? It may help me to understand this issue clearly.
    Meanwhile, please logon a problematic client computer and navigate to the path: C:\ProgramData\Microsoft\Windows
    Server\Logs folder. Then check if there is Computerconnector log file. If there is, please check it if can find some clues. (Please note: the log file is a hidden file. Please open Control Panel, select Folder Options, select View tab and check Show hidden
    files, folders and drives. Then you will be able to find the log file.)
    If any update, please feel free to let me know.
    Hope this helps.
    Best regards,
    Justin Gu

  • Add Windows Server 2012 R2 domain controller to Windows 2008 R2 domain

    Hi,
    Have today 2 x Windows Server 2008 R2 domain controllers, and domain and functional level 2008 R2.
    We now want to replace these DC`s with Windows Server 2012 R2.
    My plan is as follow
    - Install and promote a Windows Server 2012 R2 as a 3 DC`s with a temporary hostname and IP as DC3
    - Install and promote a second Windows Server 2012 R2 as a 4 DC`s with a temporary hostname and IP as DC4
    - Decomiss DC1 and remove this host. Change the IP and hostname of the new DC3 to DC1
    - Move FSMO roles from DC2 to DC1 and decomiss DC2
    - Change the IP and hostname of the new DC4 to DC2
    Will this be a ok progress ? I will offcours to have the DC`s replicate information between them before doing each task.
    /Regards Andreas

    Hi,
    Only error i got running dcdiag was the following
     Starting test: NCSecDesc
        Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have
           Replicating Directory Changes In Filtered Set
        access rights for the naming context:
        DC=ForestDnsZones,DC=domain,DC=local
        Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have
           Replicating Directory Changes In Filtered Set
        access rights for the naming context:
        DC=DomainDnsZones,DC=domain,DC=local
        ......................... DC1 failed test NCSecDesc
    Is this a problem ?
    I would guess not since im not implementing a RODC ? Ref:
    https://support.microsoft.com/en-us/kb/967482?wa=wsignin1.0
    You can ignore it.
    This posting is provided AS IS with no warranties or guarantees , and confers no rights.
    Ahmed MALEK
    My Website Link
    My Linkedin Profile
    My MVP Profile

Maybe you are looking for

  • Help picking out a new video camcorder...what format do I use?

    Help! I want to purchase a new HD video camcorder. I want a good unit with a limit being close to the $1,000 range. I will make some short movies and am struggling with what to purchase. I use FCE 4.01 for most of my editing, and sometimes I will use

  • Maximum number of pages in iWeb?

    Is there a maximum number of pages that one can have in iWeb? Thanks!

  • Brand New 40E210U Sound But no Picture

    I just bought this tv just set it up. When i turn it on i get picture and sound for 5 secounds and then the picture disapears. the tv still responds to the remote changing channels and volume but the picture is gone. I can turn the tv off and the pic

  • Can I connect landline phone to the 4G LTE wireless router?

    Can I connect a landline phone to the 4G LTE wireless router?

  • Dynamic title bar

    Hi experts , can any body tell me how to create dynamic title bar in interactive report ,i.e, suppose we have 17 pages,every page should contain the same heading, and i have one more question what are the mandatory things required in data Dictionary