VSS MEC to different vendor devices

Hello:
I am configuring a VSS using two 4507R with dual supervisor, and I'd like to know whether MEC supports a different vendor's device in the other end.
To be specific,  I need to connect this VSS to a non-Cisco firewall. If this firewall supports LACP, I want to use a L3 portchannel between my VSS and this firewall, but I' like to know whether this would work.
Thanks in advance, Faimy.

Did you ever figure this out?  I am in the same situation and cannot figure out how to refer to specific ports on the same motherboard.
https://wiki.archlinux.org/index.php/Pu … ont.2Frear looks promising.  However I forget whether one of my cords is plugged in to the rear jack or the center jack, and moving my desktop to look is a little involved.  Oh well, next time the need arises I will experiment further.
Last edited by rosshadden (2014-03-06 03:22:47)

Similar Messages

  • WCS 7.0.164.0 Report by vendor (device type)

    WCS 7.0.164.0
    I have been asked to produce a client’s report that shows all different vendors (devices type). We have about 10000 users in our system on about 3000 APs (light version) I created a client summary report but encountered some limitations:
    If I select any time period over 6 hours, I get the message “The report you are trying to generate contains more than the supported number of records (10000). Change the report criteria to generate a report with fewer records”
    If I select a time period of 6 hours or less, I get the report including vendor statistics. Is there any way to differentiate within the vendors by device type? For example instead of the vendor apple, get apple-iPhone, apple-iTouch, apple-laptop, etc.
    I would like the ability to create my own reports, by I don’t think it is possible on the Version I’m running. All reports can be customized up to a point, but you still get information you might not care for.
    Thanks for any information to overcome these issues.
    Jorge Jiles.

    Hi Jorge,
    It looks like such a level of granularity may not be achievable yet.
    Should you need such a feature to be evaluated for potentially being included in future software releases, I would recommend to contact your local Cisco account team.
    They should be able to follow up and submit a product enhancement request (PER).
    Business units will evaluate PERs and, if feasible for the market, they may consider implementing such an enhancement in future versions of the SW/HW.
    Regards,
    Fede

  • How to integrate two controller​s of different vendors to synchronis​e the motion

    We have intended to synchronise the motion of X-Y linear positioning stages with the motion of precision press actuator. These machines supplied by different vendors and came with their stand alone controllers and their platform software controls. However, each controller has digital I/O which can be used to extraxt the digital signal for external devices. I am looking advice for the simple way to integrate these controllers and to develop synchronising motion of these machines...appreciate your comment thank you

    It would be helpful to know more about the driver stages you use. Do they have their own feedback loop, i.e. do they use rotary or linear encoders and have their own position control? If so, is it possible to route the encoder drivers to the NI controllers?

  • GR and IR from different vendor??

    hi experts
    Can anybody give some idea to how to go about the below scenario.
    I have to create 1 PO to x vendor for 100/ea quantity.
    X vendor he 'll distribute the same some 50 vendors and advised to send materials and invoice to me with ref to 1 PO.
    So, i 'll be doing GR and IR from 50 different vendors lik per vendor 2 quantity . ( Like third party).
    By keeping reference of 1 PO , i have to do GR and IR for 50 different vendor .
    Any suggestion and solution in SAP.
    Thanks
    SAP-MM

    Hi,
    U can acheive this via Partner Function.
    There U can give the ordering Address(OA) and Good Supplier(GS) as different vender
    and PI(invoice Party) as one vender.
    Suppose you get material from different vender and Invoice from other vender.
    Hope Help U !
    Regards,
    Pardeep Malik

  • One MIRO document with two different vendors for two different line items

    Can it possible to make MIRO for a PO which is having two conditions(Basic price+Freight) with two different vendors.
    MIRO document needs:
    GR/IR Clearing    Dr.
    Freight Clearing  Dr.
    Vendor RM(X)         Cr.
    Vendor Freight(Y)   Cr.
    Is it possible to post the above document at a time not individually for each condition.

    Hi,
    Yes, It is possible to post Material and delivery cost in one document.where in material supplier is different than the Frieght vendor.
    Itm PK  BusA Acct no.   Description                    Tx     Amount in   USD   
    001 89       130001     Stock-Ingredients               244 0            880.00 
    002 96       320001     GR/IR Account - Ing.            244 0          1,200.00-
    003 86       520002     Ingredients - PPV               244 0          3,297.87 
    004 50       320008     GR/IR Account - Duty            244 0            797.87-
    005 50       320009     GR/IR Account - Fre.            244 0          2,180.00-
    Thanks
    Dinabandhu

  • HT1918 Hi - I think I have different apple devices recorded under different apple IDs. Now I would like to consolidate all the devices under one Apple-ID.  I have tried to do this going through the manage accoung like, but it timed out - could somebody he

    Hi - I think I have different apple devices recorded under different apple IDs. Now I would like to consolidate all the devices under one Apple-ID.  I have tried to do this going through the manage accoung like, but it timed out - could somebody help, pls

    Purchases of multple Apple ID accounts cannot be merged as noted here >  Frequently asked questions about Apple ID

  • TS3510 I have 3 different apple devices using the same Apple ID and would like to use FaceTime to call from one device to the other.  Do I need a different Apple ID for one of the devices in order to do that?

    I have 3 different apple devices (iPod Touch, iPad and MacBook Pro) using the same Apple ID and would like to use FaceTime to call from one device to the other.  Do I need a different Apple ID for one of the devices in order to do that?

    I found this on a related question in the Community:
    Yes you can do it. I do it with 4 different devices all using the same Apple ID.
    You need to associate different email addresses for each device in order to use those email addresses as the "contact at" email address. The reason the calls are dropping on you now is that what you are trying to do is like calling yourself on your own phone.
    You can also create new iCloud accounts on each device simply to use for FaceTime, but I'm guessing that the users of the other two devices have their own email addresses which will make this work for you quite easily.
    Take a look at this for more information.
    The seems to go against what Gail said and the issue you raised about buying dup apps was my first concern.  If this other post is correct, how to I set a different "contact at" in the iPod Touch?
    Goose

  • One PO for two different vendors

    Hi Experts ,
    My Questions are ......
    Can we maintain two different vendors for two different materials and create one PO ? ;
    How does it work  ?
    How is it sent to different Vendors ?.
    Will the vendor receive one general PO containing all line item materials from different vendors...or Each vendor will receive his own line item PO (PO Split)...
    Regards
    Albert

    Hi Albert,
    Your qns-
    Can we maintain two different vendors for two different materials and create one PO ? ;
    Yes you can maintain 2 different vendors for 2 different materials. But you cannot create a single PO (i.e. PO with same number) for 2 different vendors. I do not understand why you want to create one PO for 2 vendors supplying different materials. Can you please explain the logic for it?
    Vivek

  • HT204053 Can I search or locate different iPhone devices using one apple ID?

    Hello!
    Can I search or locate different iphone devices using one apple I.D.?
    Thanks!

    You can only use Find My iPhone for accounts that you can log into.  If you and your neighbor have different IDs and you only know your ID, than you can only track devices attached to your account.

  • How do I get received messages from others to show up on my different Apple devices, such as my iPhone

    How do I get received messages from others to show up on my different Apple devices, such as my iPhone or iPad or iPod Touch, etc. I can see their reply on the device I was using at that moment but not on the other devices even iMessaging is turned on. Is there a way to refresh to incoming messages when one picks up one of their other Apple devices?

    Hi there lkbluntzer,
    You may find the information in the article below helpful.
    Send and receive messages
    http://help.apple.com/iphone/7/#/iph01ac18d71
    See what time a message was sent or received. Drag any bubble to the left.
    -Griff W. 

  • Unplanned Delivery costs in MIRO for different Vendor

    I have an annual PO and I invoice it with normal MIRO transaction.
    At the same time I have one service which I want to be a unplanned delivery cost for this PO. This service will be assigned to the material account and it is for a different vendor.
    Can I do it in MIRO creating only the value in the unplanned delivery cost and insert a different vendor? In OBYC this is assigned to UPF category.
    Can you please help me?

    Hello,
    You can use transaction MIRO to do unplanned delivery costs.
    You use "Subsequent Debit" and insert the PO number (equal to invoice). The system will show the lines of the PO that were already invoiced and in the tab "Details" you should change the Invoice Party and inser the value of the unplanned delivery costs in the field "Unpl. Del. Csts".
    If you don't have the costs in the PO for different vendor you must create like this...with Subsequent Debit. Only if you have planned costs in the PO it is possible to do it invoice and costs in the same document for different vendors otherwise you must have 2 documents (invoice for the material vendor and subsequent debit for the other unplanned costs vendor).

  • Different MIC,s for different vendor.

    Hi,
    My client has a business sceenario like this...
    they procure same material from 2 different vendors.for one vendor they want simple MIC's to be inspected and for other they want some more characteristics to be checked. I can use two IP but they dont want it.
    Plz give some solution for this.
    Thanks

    create a inspection plan for the material.
    Create 2 group counter and assign different MIC's.
    Goto header and select material assignment tab. in that you will see the group counters and also a field for vendor. you can fill the vendor no there.
    in this way you can create  combination of material, group counter and vendor.
    during GR, system will select MIC based on the above combination

  • Down payments to different vendors through app (f110)

    hi frineds how can i make down payments to different vendors through APP in (f110),  where should i configure this settings ? pls help me with t.codes and paths..

    SETTINGS:
    Usually "F" is used for DPR (DOWN PAYMENT REQUEST) and "A" is used for DP (DOWN PAYMENT).
    "F" has as target indicator "A" by OBYR transaction.
    POSTINGS:
    By F-47 You post a DPR.
    During the DPR posting, you have to insert the Target indicator; usually A and the DPR will report F as special indicator. ( Bcoz DPR(F) will target DP, that is A)
    Into FBZP --> All company codes --> Sp. G/L transactions to be paid --> if you insert F, the System will take the DPR previously posted during the F110.
    But if you posted some DPs, these DPs will not take in consideration by F110.
    ALL THE BEST

  • Different Vendor Payment in same Document Number....?

    Hi,
    If any one aware of this case please Revert back.
    Client Requirement:
    Different vendors payment they are giving one single check (RTGS) to Bank.bank will transfer the money to Particular Vendors Account.
    In our System we can create Payment Batch but system will generate the check (Document Number) for each vendor.(We are issuing only single check)
    Is it possible to make the Payment batch through one single check for Multiple vendors........?
    Regards,
    senthil
    Edited by: Senthilkumar Chellamuthu on Feb 26, 2013 4:43 PM

    This is the result of a preference setting. In the General section of the prefs set the radio button for "When Scaling:" to "Apply to Content" instead of "Adjust Scaling Percentage" and the values will reflect their true dimensions. In tyhe meantime you can select the object and open the menu on the end of the Control panel and choose Reset Scaling to 100% to reflect the actual weights.

  • In MIRO system showing different vendor other thar PO

    Hi
    During Invoice booking in MIRO, system is showing different vendor other than the vendor in Purchase order.
    As a result different vendor other than PO vendor is getting credited.
    We have checked below settings.
    u2022 Partner roles in vendor master record is not changed
    u2022 Partner Roles in PO is not changed
    u2022 Invoicing Party field in details tab in MIRO is greyed out hence user can not change it
    PO has not been changed as per change history.
    Please guide me as what can be the possible reason for this.
    Thanks & Regards,
    Vivek

    Please consider this scenario,
    1. Suppose you have two PO ( A & B) with different vendors and you want to do the invoice for the PO A for Vendor X (say).
    2. So you have entered the PO number B and then realised that the wrong PO number has been specified.
    3. So without coming out of the transaction or without executing new transaction, you entered the PO number A.
    4. So the item details will be taken from the PO A but in this case the vendor details will be of PO B becoz the header details will not change until you will not come out of the screen or transaction.
    This is the reason for getting the wrong vendor against the PO.
    Solution for this issue:-
    1. Cancel the invoice and redo the invoice for the PO.
    2. Pass the JV from one vendor to another vendor.

Maybe you are looking for