VSS support on cat 4500x
Hi,
when the VSS will be supported on Catalyst Supervisor Engine 7-E or 7-LE and on Catalyst 4500-X?
And does VSS will require Enterprise license ? or the IP base will be enaugh?
Tks
Paolo
Hi,
Is there any info on the VSS license for SUP7L-E ?
http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/release/note/OL_27990-01.html
Under Table 5 - Support by Image Type; VSS is listed as available on IP Base (SUP7E only) and a plain Yes under Enterprise Services
http://www.cisco.com/en/US/prod/collateral/switches/ps10902/ps12332/at_a_glance_c45-696645.pdf
Under Table 1 - Minimum License for VSS; IP Base or higher (7-E) or special license (7-LE and Catalyst 4500-X)
There appears to be no option on the CCO configuration tools to add VSS license on 4500R+E chasiss bundles with for example dual SUP7L-E and IP Base
How are you meant to purchase/license VSS on 4500E Chassis + SUP7L-E ?
thanks,
Sez
Similar Messages
-
Is VSS supported in Cisco Prime Infrastructure 1.2?
Is VSS supported in Cisco Prime Infrastructure 1.2?
VSS support (converting standalone switches into a VSS) was introduced with LMS 3.0.1 if I remember well and it is still there in LMS 4.2 (Cisco Prime Infrastructure):
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/4.1/user/guide/configuration/configvss.html
Config Mgmt is supported, also. -
JDeveloper 11 and VSS Support?
The VSS Extension (available at sourceforge.net) does not work with JDev 11 (Just JDev 10). Are there plans for VSS Support in JDev 11, or am I better off convincing my management that JDeveloper projects should use either Subversion or CVS?
Edited by: klee on Oct 22, 2008 10:26 AMThis extension is open source - so you can take on the task of upgrading it to support JDeveloper 11g :-)
As for us at Oracle we don't have plans to do development around supporting VSS - we do have support for MS Team Studio though.
I would recommend that you push your managers towards using Subversion - the fact that it is a free tool and a very popular tool in the Java community should be enough of an argument - and the fact that the support in JDeveloper is built-in can be the cherry on the cake. -
I've just started evaluting JDeveloper and like it so far. One thing I was wondering is if there are any Visual Source Safe support - something I need to have unfortunately.
I only find CVS as default and Google didn't help me out there, maybe someone here knows about it?
Best regards
StefanNo VSS support right now.
We do have support for CVS, Clearcase, Perforce, and Serena Dimension.
(see the help->check for updates).
Support for Subversion and Windows Team Server is being developed right now.
For a simple way to integrate with third party version control tools see this one:
http://www.oracle.com/technology/products/jdev/101/howtos/extools/subversion.html -
Prime 2.1 and 4500X-VSS support?
Anyone with a Prime 2.1.2 that successfully archives configurations from a WS-C4500X-16 running VSS?
Error message after Configuration Archive:
No device package found for the specified device.
The software on the 4500X is 03.04.03SG.
Support for 4500X in PI 2.1.2:
Device Type
SYSOIDS
S/W Version
Software
Cisco Catalyst 4500X-16 SFP+ Switch
OID:1.3.6.1.4.1.9.1.1605
IOS
Cisco Catalyst 4500X-32 SFP+ Switch
OID:1.3.6.1.4.1.9.1.1606
IOS
TanksYes, all device packages are installed (including 7.0) and the Pi 2.1.2 patch.
Info from "ifm_config_archive.log" when trying Archive the Configuration:
[2014-12-09 19:58:11,300] [pool-37-thread-5] [service] [ERROR] - Thread Id : [9,460] : IFM_CONFIG_ARCHIVE_ERROR_DETAILS: [Error in fetching VLAN file] : IFM_CONFIG_ARCHIVE_ERROR: [com.cisco.ifm.config.archive.service.exceptions.XDEFeatureExecutionException: No device package found for the specified device.]'
Maybe the Prime don't know where to find the vlan.dat on the 4500X-VSS ?
#dir cat4000_flash:
Directory of cat4000_flash:/
1 -rw- 2236 <no date> vlan.dat
sysObjectID (1.3.6.1.2.1.1.2) is
.iso.org.dod.internet.private.enterprises.cisco.ciscoProducts.cat4xxxVirtualSwitch
That is not the expected and supported value "4500X-16" above
Update: Error on fetching running and startup config as well:
[2014-12-09 20:24:21,818] [pool-37-thread-9] [service] [ERROR] - Thread Id : [10,013] : IFM_CONFIG_ARCHIVE_ERROR_DETAILS: [Error in fetching RUNNINGCONFIG file] : IFM_CONFIG_ARCHIVE_ERROR: [com.cisco.ifm.config.archive.service.exceptions.XDEFeatureExecutionException: No device package found for the specified device.]
[2014-12-09 20:25:31,882] [pool-37-thread-9] [service] [ERROR] - Thread Id : [10,013] : IFM_CONFIG_ARCHIVE_ERROR_DETAILS: [Error in fetching STARTUPCONFIG file] : IFM_CONFIG_ARCHIVE_ERROR: [com.cisco.ifm.config.archive.service.exceptions.XDEFeatureExecutionException: No device package found for the specified device.] -
6500 IPSEC-2G or IPSEC-3G VSS Support
Hello,
We would like to install VSS Chassis with a pair of Sup720-10G Supervisors. Can we use IPSEC-2G or IPSEC-3G cards on SSC-400 with VSS. On the following links the VSS is mentioned to not to be supported but the document is for 12.2 SX IOS Release,
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/6500series/76ovwvpn.html
IPsec VPN SPA supported with virtual switching system (VSS)
N
N
N
N
N
N
May be more recent documentation for these cards supported?
Thanks in Advance,
Best Regards,You can use IDSM2 to analyze the traffic you can try with Promiscous mode
-
Hi,
Does anybody know whether workshop 8.1 has a vss plugin? If it has, where could
I find it?Hi Rajasehar K,
According to the cisco doc's it is mentioned that 4500-E chassis supports vss technology and Sup-8 also Support's VSS technology.
Check out this link:
http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-4500-series-switches/data_sheet_c78-728191.html
Regard's
Rahul Chhabra
Network Engineer
Spooster IT services -
Hi,
I would like to know wheather firmware A2(1.6a) can be used with a VSS Configuration? If not which ios of ACE is supported for VSS Setup?
Thanks in advance.
Regards,
FarihaCheck out the follow link from the ACE release notes.
http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/ace/vA2_3_0/release/note/RACEA2_3_X.html#wp546319
Virtual Switching System Support
The ACE10 and the ACE20 running ACE software version A2(1.2) or later and installed in a Catalyst 6500 series switch running IOS software version 12.2(33)SXI or later support the Virtual Switching System (VSS). VSS is a system virtualization technology that allows the pooling of multiple Catalyst 6500 switches into a single virtual switch for increased operational efficiency by simplifying the network. Inter-chassis Supervisor switchover (SSO) boosts non-stop communication. For more information about VSS, see the Cisco IOS Version 12.2(33)SXI Configuration Guide. -
Dear Experts,
I've been waiting for IOS 3.6.0Xe to enable VSS in a data center deployment.
I heard that Cisco has planned to release it in June, 2014 but till now there's no update for this.
Is there anyone who can help me to know whether Cisco is releasing this in June 2014 or I've to stay on the HSRP.
Best Regards,
UmerCisco has released 3.6.0 last week, can somebody please confirm if VSS is supported on Sup 8e with this long awaited release?
I need to know this urgently as my client is requiring this feature since so long.
Best Regards,
Umer -
WCCP Supported on Cat 3560?
Anyone know *first-hand* if WCCP is supported on Catalyst 3650s? and with what code revs?
Posted documentation on CCO seems to conflict both itself and with the CCO feature navigator -- I actually bought a pair of 3750s based on several published documents saying WCCP is supported -- only to find out that is not the case. There is even more documentation (including a how-to configuration doc) on enabling WCCP on a 3550 and 3650 switch -- yet the feature navigator says WCCP isn't supported on ANY Catalyst switches except 6500s.
Anyone know the deal for sure?
-JeremyHi Jeremy
we do not support WCCP on either platform. It _is_ on the roadmap, but at this time, there is no ETA for supporting the feature. There are several mentions of WCCP support in the documentation, but they are in error, and documentation bugs have been filed to get this fixed.
HTH,
Bobby -
Hello All,
We are planning to convert our 6509 chasis' into a VSS.
Each chasis house an FWSM.
The chasis are running the following IOS- Release 12.2(33)SXH8b and FWSM are at 3.2(Application software)
We understand that the FWSM need to be upgraded but arent sure if the newer 4.0 or 4.1 versions will be compatible the IOS version on the supervisor.
Can someone please advise on this.Firewall Services Module (FWSM) (WS-SVC-FWM-1-K9)
12.2(33)SXI
4.0.4
Just to add this will be minimum requirement . In regard to your 2nd question 4.1 will be the new release.
Thanks
Ajay -
Can anyone give me a definitive answer as to how I enable Jumbo frame support on a 4500x system?
Ive enabled it on the VLAN interface and the physical interfaces dont have the command available in config mode.
Thanks in advance.
IainStrange... it's even given as an example here: http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/15-1-2/XE_340/configuration/guide/config/sw_int.html#pgfId-1068699
What does the following attempt look like on your switch?
sw1#conf t
Enter configuration commands, one per line. End with CNTL/Z.
sw1(config)#inte
sw1(config)#interface te1/1
sw1(config-if)#mt
sw1(config-if)#mtu ?
<1500-9198> MTU size in bytes -
LCD Panel not supported (acpi brightness)
Hi all,
This is my first post, Hello! I have used several distros but this is my first time using Arch.
I have a dell d420 (dual core / intel graphics). I have installed Arch with lxde / compiz.
Things have been going pretty well so far, I really like the distro. However, I am having problems with laptop-tools and adjusting the brightness of my lcd on AC acpi events.
Basically, I have /etc/laptop-mode/conf.d/lcd-brightness.conf configured as follows:
# Should laptop mode tools control LCD brightness?
CONTROL_BRIGHTNESS=1
# Commands to execute to set the brightness on your LCD
BATT_BRIGHTNESS_COMMAND="echo 20"
LM_AC_BRIGHTNESS_COMMAND="echo 70"
NOLM_AC_BRIGHTNESS_COMMAND="echo 100"
BRIGHTNESS_OUTPUT="/proc/acpi/video/VID/LCD/brightness"
Further, laptop-mode is running and set up as a daemon.
The problem is when I plug/unplug the power cable the brightness of the panel does not change in the way I would expect it to. Sometimes it does not change at all, sometimes it gets brighter on battery than it does on AC!!! The brightness keys on my laptop work fine (however, they are I believe prgrammed into the bios and rely on no software to adjust the panel.)
Things I have installed / setup:
acpid
acpi
laptop-tools
I have noticed that there seems to be a problem recognising my panel, when I do a
cat /proc/acpi/video/VID/LCD/brightness
I get the response:
<not supported>
Also:
cat /proc/acpi/video/VID/LCD/info
device_id: 0x0400
type: UNKNOWN
known by bios: no
I think this is the problem, as laptop-tools and acpi seem to be configured correclty apart from this issue. Any thoughts?
Many, thanks.
Last edited by e-dard (2008-10-25 16:11:37)OK, it looks like others have had a similar issue with the NVS 3100M adapter. I found this prior post:
I followed the advice there and installed the 32 bit A08 driver that I found here:
Now the backlight works fine on startup. Unfortunately my system has lost some other small functions and seems a bit slower, however, at least I can now work while I travel.
It's a bit disappointing that newer drivers seem to break my computer. I'd very much like for that not to happen.
Some steps of this, like updating the BIOS and installing the driver were a bit complicated, so I'm happy to give advice on how to do that if anyone needs. In the meantime if anyone has a better way to fix this, I'm keen to find out. -
Prime Infrastructure 2.0 Software Deployment VSS Systems
Good day -
Has anyone used the PI 2.0 Software Deployment with VSS systems like 6500 or 4500? Does it work? Does it upgrade the image in eFSU? Should VSS systems be manually updated?
Finally are there any guides or documentation on using PI 2.0 to deploy / upgrade images for platforms like 6500 / 4500 running VSS mode?
Thanks,
Johnthere is a Feature Enhancement BUG filed for VSS support
Unable to add or manage a 6500 in VSS in PI:
https://tools.cisco.com/bugsearch/bug/CSCuj09930/?reffering_site=dumpcr
Thanks-
Afroz
[Do rate the useful post]
****Ratings Encourages Contributors **** -
Can not access FWSM via session command in cisco 6513 (VSS enabled)
Dear All,
Today i received FWSM from cisco (RMA), I need to configure it as standby unit for existing FWSM active/standby setup.
IOS on RMAed FWSM is 2.3.4 and cisco VSS supports FWSM IOS 4.0.4 and later.
My issue is, I cannot access FWSM (IOS 2.3.4) via session command from cisco 6513 but could successfully consoled it without any problem. I have reloaded it twice and also tried to disable and enable power on it.
VSS#sh module switch 2
Switch Number: 2 Role: Virtual Switch Standby
Mod Ports Card Type Model Serial No.
2 6 Firewall Module WS-SVC-FWM-1 -----------
Mod MAC addresses Hw Fw Sw Status
2 0034.2fd7.3b04 to 0019.2fa7.3b0b 4.2 7.2(1) 2.3(4) Ok
Mod Online Diag Status
2 Pass
VSS#session switch 2 slot 2 pro 1
The default escape character is Ctrl-^, then x.
You can also type 'exit' at the remote prompt to end the session
Trying 127.0.1.21 ...
% Connection timed out; remote host not responding
Can someone please let me know why I cannot access FWSM through session command ?
Whether this is because of older IOS ? If yes then how to upgrade its IOS ?
Is it possible to upgrade IOS via FWSM console ? if yes, please let me know.
Do i need to test on different slot ?
Look forward to hearing from someone.
Thanks & Regards
Ahmed...There is a limitation that FWSM running version older than 4.0.4 will not accept session from the switch if the FWSM is not seated into switch 1 AND if switch 1 is not active.
So to upgrade the FWSM you either need to use the console or put the FWSM physically in switch 1.
Thanks,
Jeroen
Maybe you are looking for
-
Will I lose everything if I make a new apple ID
I have been using my moms apple ID with her name and credit card and all her stuff because I was a kid with an Ipod and she liked to monitor what I was doing and downloading and stuff. Well now I am 18 and I am getting an Iphone. Im going to be payin
-
How do i export my contacts into a csv file?
I need to export my contacts into a csv file - Apple support says it can't be done. Any suggestions anyone please?
-
IPod Touch 8gb First Generation Problem
Dear Apple Discussions: I just recently acquired a iPod Touch 1st Generation from Ebay.com on May 3rd 2010. Here is the link: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=180501743808&ssPageName=STRK: MEWNX:IT ~~~>And it just arrived here today
-
I took my mac in to get a new HD, but they gave me a smaller one without me knowing?
So I took my imac in a few months ago because it wasn't working- they said I needed a new HD so I said okay and they took my computer and days later I got it back only to realize it was so much slower then before (even with my HD was dying it was fas
-
How to install Java 6 32 bit??? Thanks!