VSTO: Word Automation how to Protect Document with Restricted Access

hi all:
As the title, how to achieve this in VSTO?
Could you show some Word API for this requirement?
Really thanks,
Best regards,
Riquel
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Actually I just want to use Automation/VSTO to implement "Restrict permission to content in files". Any idea?
https://support.office.com/en-nz/article/Information-Rights-Management-in-Office-2010-c7a70797-6b1e-493f-acf7-92a39b85e30c?ui=en-US&rs=en-NZ&ad=NZ
Thanks! 
Best regards,
Riquel
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Similar Messages

  • How to scan documents with HP Officejet 5610 and iMac 21.5 ?

    Hello,
    Please can someone tell me how to scan documents with a HP Officejet 5610 all-in-one printer and an iMac 21.5 , OS X Yosemite version 10.10.1 ?
    Thanks a lot.

    Hi,
    Scanning can be done on Yosemite as listed in the following document:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c04467713&tmp_task=useCategory&cc=us&dlc=en&lc=e...
    A such will allow scanning as a PDF file as example.
    If by "Scanning a Document" you may refer to OCR scanning (e.g. scanning a text to a Word file which can be edited), a such is not supported by the provided solution and will require a 3rd party software which offer OCR capabilities. Vuescan re as example support a such:
    http://www.hamrick.com/vuescan/hp_officejet_5600.html
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • How to park document with reference?

    Hi All,
    We have function to post document with reference in SAP but how about park document with reference?
    Can anybody help me?
    Thanks n really appreciate

    Thanks for your reply. Fyi, I've applied employee limitation to post manual journal at tcode OBA4 and OB57.
    User A : >100K - 500K
    User B : >500K - 1 MILL (Asst. Manager)
    User C : >1 MILL (Manager)
    Normally user A will park all the journals but after apllied the limitation, user A only can park for the journal (normal tcode F-02 or other tcode) which not more than 500K. The limitation affect the park as well.
    Alternative for tcode F-02:
    User A : Park doc at FB50 (any amount) and post at tcode FBV0 by other user. There's no park or post with reference.
    User request to park with reference.. Any idea?
    Thanks friends

  • Is it possible to protect documents with 2008 \ 2012 R2 AD RMS on Workgroup Machines \ another domain machines?

    Hi Experts,
    I have scenario where I have TWO 2008 R2 AD forests with cross forest trust and also I have some workgroup Win7 Machines.
    I wanted to deploy AD RMS in any one forest (Say Forest A), as forced by customer
    Is it possible that My forest B users can protect documents with AD RMS in Forest (A)
    OR
    Is it possible that my workgroup computers can protect documents with AD RMS of Forest A? Can I use user credentials from forest A to protect documents on workgroup computer
    OR
    Lets take a scenario:
    I create user in forest A with addition of email address of forest B user
    I share this ID to respective forest B user, forest B user logged on to forest B computer
    Now can forest B computers can protect documents with AD RMS from forest A by entering forest A user id \ password when RMS prompts for authentication?
    Thanks in advance
    Thanks Best Regards Mahesh

    Can anybody shade some light on this please?
    Thanks Best Regards Mahesh

  • BW : RSA1 with restrict access, possible?

    Hi all,
    Its possible use RSA1 with restrict access ?
    You can implement the transaction RSA1 restriction of access.
    Example:
    Some users can not use the part of source systems (TCODE RSA13).
    In this example, we block the transaction RSA13, however using RSA1 itself unable to access the part of source systems.
    thz

    Just to add some more info to Durgesh's reply...
    Using obj S_RS_ADMWB you can restrict access to different ares of AWB. See online docu on this topic:
    [http://help.sap.com/saphelp_nw04/helpdata/en/80/1a6859e07211d2acb80000e829fbfe/content.htm|http://help.sap.com/saphelp_nw04/helpdata/en/80/1a6859e07211d2acb80000e829fbfe/content.htm]

  • How to define a Rights Management process "Protect Document" with an watched folder?

    Hello.
    I try to build a process in Workbench 11.0, that uses the Protect Document operation of Rights Management.
    The process should use a watched folder as start point.
    My problem is, how to fill the operations parameters (Input Doc, Document name, Policy set name, Policy name, ...)
    Jürgen

    First -- by default iTunes stores its Library in "My Documents\My Music\iTunes\iTunes Library.itl", and its Music in "My Documents\My Music\iTunes\iTunes Music\".
    Make sure you have a "iTunes Library.itl" after the restore -- if not, and your backup software supports it, try an older version of the file. If your backup software only keeps the last version of the file -- well, then you are SOL, and you will have to re-add the files to the Library. You will also have to rebuild your playlists, ratings, etc.
    Since you have "very few files" in the iTunes Music directory -- either you weren't storing your music there, or your backup didn't work. Are you sure you weren't using a non-default location for your music files?
    If you had a hardware problem then it is likely that your backup stopped working properly at some point. This is why you need a rotating backup scheme and periodic archiving of files to non-writeable media (If you have the time/money)

  • How to resize document with content?

    ID CC 2014
    How do you resize a document with content so that the scale of everything is maintained, but the final output is just a smaller size?
    I have a 7x7 square booklet, laid out with content, I want to make this a  6x6 square booklet.

    Thank you.
    …The more I use InDesign and Illustrator the more and more amazed I am at Adobe's ability to entirely disregard features that seem obvious and required. This process should be no more complex than a dialog box, much like Photoshop's "image size" - Enter a new desired page size, and all objects scale up or down in uniform to match the new page size.
    How is this not in the software already?
    I can't be the only one who has had a output size change after the project has started or is finished.

  • How to connect oracle with ms access database

    Dear
    We are on release r12, right now we have requirement to connect oracle database with ms access to get some information. We have found gateway(Heterogeneous services) using ODBC, but at the database side where is installed oracle r12 there is no installed ms access software becuse of linux operating system, so how could it will connect ms access because without installing ms-access we are unable to find ms ODBC gateway in ODBC driver under the control panel.
    Can any body guide me how could achieve this
    Edited by: oracle0282 on Sep 21, 2011 12:47 AM

    If I understand you correctly you want to access Oracle on Linux from MS-Access (possible on Windows only). You need neither a gateway nor Heterogeneous Services, but an Oracle client including ODBC driver (Instant client with ODBC driver is enough) on the Windows machine.
    Configure the ODBC driver with the connect informations to the Oracle server.
    Werner

  • Problem with Restrict Access to Page with access level using ASP

    I'm using Dreamweaver CS3 with ASP-VBScript and an Access
    database. The pages were created from scratch for this project,
    using those tools all the way through.
    I've created a login page, an admin homepage, and add, edit,
    and list records pages for three tables. The login page uses the
    Server Behavior "Log in User", all other pages use the Server
    Behavior "Restrict Access to Page". All of these are based on an
    Access Level.
    Login seems to work correctly, and redirects to the admin
    homepage. From the admin homepage, I can open any other page as
    expected, and they initially display correctly. On the add and edit
    pages, however,
    submitting the form often results in getting logged out, but
    not always.
    Once this happens, I can log back in, but other problems will
    sometimes occur during that second login session. Sometimes,
    logouts will occur on pages that worked fine during the first login
    session. Sometimes, another session variable that I've setup
    manually will change when it shouldn't...as if there were two
    values stored for my session variable, and reloading the page
    changes to the other value.
    This
    post seems closest to my experience, but it doesn't look like
    there was really an answer beyond "I had to fight with it for a bit
    to get it to work":
    I suspected that there is some problem with session settings
    on the server. We have an almost identical tool on the same server
    that was developed with an older version of DW that works more
    reliably; it sometimes has problems with the initial login, but
    never has a problem after that.
    Has anyone experienced problems like this? Any suggestions
    for what to check? I'm really pulling my hair out since it's so
    unreliable...the kind of problem that goes away when you try to
    show someone and comes back when they leave.

    Hello,
    I was thinking that all I would need would be the username, although username and paswsword would be more secure.  There are about 50 users and no groups or levels.  They are all equal ... same level.
    The website is private and there is a general content area for all users and then there will be private areas for each user where proprietary documents will be held.  I need to be able to ensure that user 'A' can only see the user 'A' pages, user 'B' can only see user 'B', etc.
    I don't really understand what the Dreamweaver script is doing, but the overview sounded like it was the right tool to accomplish what I'm trying to do.
    Any assistance greatly appreciated.
    thanks.

  • How to protect URL with OSSO while leaving sub-URL unprotected

    Hi,
    I have deployed an application to OAS while SSO is enabled and I have the following URL to be protected:
    http://host:port/myContext
    In the myContext application, there is a servlet that I want to be unprotected:
    http://host:port/myContext/myPublic
    I tried two ways to achieve this. One is in mod_osso.conf, create a Location entry like:
    <Location /myContext/>
         require valid-user
         AuthType Basic
    Order deny, allow
         Allow from myPublic
         Satisfy any
    </Location>
    The other way is to create a LocationMatch in mod_osso, like:
    <LocationMatch ^/myContext((?!myPublic).)*$>
    require valid-user
    AuthType Basic
    </LocationMatch>
    The problems with both of these two methods are they seem to break the HTTP server or show down the whole server. I would like to get help on this:
    1. What is the legitimate way to do this: protect a URL while unprotect its sub-page.
    2. In order to protect a new URL, besides adding a Location or LocationMatch , is there something else to do? I don't know why the new entries break/slow down the server.
    Thanks for any help.

    Hi,
    Please refer to this message:
    Re: How to deal with SSO secured webservices
    I tested the described approach and it worked fine for me.
    Best regards,
    IG

  • How to share documents with iCloud and Pages?

    I keep getting reminded to remove everything from iWork, but I don't really understand how to share anything (documents) on iCloud. Am I missing something? (Well, I know I am, but it isn't exactly straightforward to me.)
    Could someone point me to some information about that?
    Thanks.

    You can store iWorks docs on iCloud, but you cannot share them with others.  The old iWorks beta web site let you host files for other remote users to have access to them, and iCloud (at least not now) does not allow that.

  • How to save document with pixel aspect correction?

    I have a document which has has a non-square pixel ratio thus requires pixel aspect ratio correction to be turned on to view the image correctly.
    I want to save it as a JPEG for use online however I cant find an option anywhere to make the saved file have the corrected aspect ratio.
    Essentially when I save the file as a jpeg (or any end format) the image is squished. How can I save the file not squished? (ie. burn in the ratio correction)

    As I still work with a lot of Images, being used in SD Video, where non-square pixels are the rule.
    I Save_As PSD, and Import those adjusted PAR (Pixel Aspect Ratio) Images. However, that does not work in your case. I have never used JPEG, but wonder if that format is fully supportive of non-square pixels - never needed JPEG, so have never investigated.
    As Web display is on a computer, with square pixels, why the use of non-square pixels for the Web? [Just curious]
    Good luck, and wish that I had more to offer, perhaps PNG?
    Hunt

  • Back Dated AR Aging Detail - How to see Documents with Open Balances Only?

    Dear All,
    Our customer is trying to submit a back dated AR Aging Detail report to their bank. When they run the report as of 09/30/08, the detailed aging report is 28 pages long and has all the partial payment details which the bank does not need; rendering the report useless.
    We would like to find out if there is a way to run a back dated AR Aging Detail report and only see Document Number, Date and Open Balance.

    Hi,
    Please check Note No. [800294|https://websmp130.sap-ag.de/sap(bD1odSZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=800294] which describes about settings required to run the backdated aging report in 2005 version.
    If you are working with 2007 version, then you need to check the tickbox "Display customer with zero balance" and run the backdated aging report to get the correct results with the open figure (which will match with the AR receivables Account balance as at that date).
    However, if your 2007 version is below patch level 38, you can refer to Note No. [1178854|https://websmp130.sap-ag.de/sap(bD1odSZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1178854] which can be of help in that case.
    Hope the information was helpful.
    Regards,
    Jitin
    SAP Business One Forum Team

  • How to protect password with pdf file in oracle database

    hiiii,,,,i have a form in 6i where i am sending pdf file(by running report) to the other clients in the network,,now my requirement is that i want to protect a password with this pdf file whenevr i run new report ,,wat should i do..
    plz help
    lovely sethi

    [email protected] wrote:
    hiiii,,,,i have a form in 6i where i am sending pdf file(by running report) to the
    other clients in the network,,now my requirement is that i want to protect a
    password with this pdf file whenevr i run new report ,,wat should i do..Why not just rely on OS security withing the server? If you email it to a
    particular individual, then it's protected as far as you trust that individual
    anyway!
    Those who are in the dba group on the server can get at the data
    in any case.
    I just don't see the point in trying to do what you're asking - unless
    I've missed something?
    BTW, you haven't mentioned OS or db version (see .sig).
    Paul...
    lovely sethi--
    When asking database related questions, please give other posters
    some clues, like OS (with version), version of Oracle being used and DDL.
    Other trivia such as CPU, RAM + Disk configuration might also be useful.
    The exact text and/or number of error messages is useful (!= "it didn't work!"). Thanks.
    Furthermore, as a courtesy to those who spend time analysing and attempting to help,
    please do not top post and do try to trim your replies!

  • How to checkin document with 'Projects' security group

    Hi everyone,
    i want to checkin a document thru a java class, and set it to Projects security group, also i want to set folder, userlist, grouplist...
    Does anyone know how to define these things in java class before execute the CHECKIN service, or there are any extra service needed to run?
    Thanks

    Hi
    I am putting the snippet on how to do a checkin for content RIDC :
    public class TestRIDCCheckin {
    * @param args
    public static void main(String[] args) {
    // Create a new IdcClientManager
    IdcClientManager manager = new IdcClientManager ();
    try{
    // Create a new IdcClient Connection using idc protocol (i.e. socket connection to Content Server)
    IdcClient idcClient = manager.createClient ("idc://hostname for ucm:intradocserverport");
    // Create new context using the 'sysadmin' user
    IdcContext userContext = new IdcContext ("sysadmin");
    // Create an HdaBinderSerializer; this is not necessary, but it allows us to serialize the request and response data binders
    HdaBinderSerializer serializer = new HdaBinderSerializer ("UTF-8", idcClient.getDataFactory ());
    // Databinder for checkin request
    DataBinder dataBinder = idcClient.createBinder();
    dataBinder.putLocal("IdcService", "CHECKIN_UNIVERSAL");
    //dataBinder.putLocal("dDocName","TestRIDCCheckin");
    dataBinder.putLocal("dDocTitle", "Test RIDC Checkin");
    dataBinder.putLocal("dDocType", "ADACCT");
    dataBinder.putLocal("dDocAccount", "");
    dataBinder.putLocal("dSecurityGroup", "Public");
    dataBinder.addFile("primaryFile", new File("/home/oracle/cis"));
    dataBinder.putLocal is used set the metadata and details for the content .
    Hope this helps
    Thanks
    Srinath
    Edited by: srinathmenon on Aug 20, 2010 1:23 PM

Maybe you are looking for