VT Advantage with CCM 4.x

Hi team,
We are trying to do a demo for customer on VT advantage (Video) using CCM 4.x server. We are facing some peculier problem where when we initiate a call, it shows only the caller screen on the respective cameras but the voice works oerfectly fine. Is there any special settig required for both the parties to come up on the VTA screen?
Many thanks in advance
Regds/Hitesh

In CCM, make sure each IP phone is checked for "enable video" on each end. Otherwise you will only get one or the other.
You may need to reset the phone on each side also.
cheers!

Similar Messages

  • Adapter Monitoring with CCMS

    Hi,
    is there anybody who already set up an adapter monitoring  with CCMS using the alert framework of Runtime Workbench ?
    Background:
    When using the existing MTE's in CCMS (J2EE Monitor Templates - All Systems - <SID> - J2EE Applications - SAP XI Adapter Engine) only rare monitoring information related to XI messages are posted.
    What I would like to see are information about the adapters provided in the logfiles of each adapter.
    For example as soon there's a permission problem for a directory in File Adapter an alert in CCMS should be raised.
    I already checked SAP notes 870232, 913858 and 824039.
    Any feedback appreciated.
    Cheers,
      Juergen

    Hi,
      You can configure the CCMS as per the following two blogs,
    Part 1: /people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i
    Part 2: /people/sap.user72/blog/2005/12/05/xi-grmg-customizing-for-xi-ccms-heartbeat-monitoring-part-ii
    Configure the Alert Framework with the below Blog as reference,
    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
    Then forward the Alerts created in the CCMS to Alert Frame work, the required steps are given in the below help links.
    http://help.sap.com/saphelp_nw04/helpdata/en/3f/567ddea69d3d4c93a6aedabd08899e/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/30/62e77b2f4865488a866d4103923a93/frameset.htm
    Then any alerts that gets generated in CCMS can be passed to the Alert Category kept configured in the Alert Framework.
    Hope this helps you

  • Gateway Failover with CCM 4 1 3b

    Hi
    I am having issues with gateway redundancy on CCM 4-1-3b. Basically when the Primary route group gateway fails, the backup gateway does not work. You can not make external calls out of this gateway unless you change the priority of the gateways in the route group manually. The only other time it failsover is if ip connectivity fails between the primary gateway and the CCM. Has anyone had any issues like this or is there a bug with this version of CCM? Failover with RG/RL should be a basic feature with CCM?

    Hi Derek,
    CCM regards H323 gateways as a black hole. CCM does not have the ability see the busy/fail status of the H323 ports. As you said, the only way CCM would switch to the second gateway, in the Route List, would be if IP connectivity was lost.
    I would recommend that you additionally configuring outbound VOIP dial-peers (with a higher preference value) to forward the call from your first gateway to your second gateway when the first gateway is up and, for whatever reason, the outward ports are busy or down.
    Regards
    Chris

  • RFC monitor with CCMS

    Hello,
    I'm implementing RFC monitor with CCMS and I have a problem.
    I was able to implement the method with an auto-reaction method of send mail.
    It is working fine but it doesn't repeat the alert!  Let's say, imagine that the RFC isn't working since 3am... we are now at 13pm and the alert is not triggered anymore. In fact, in RZ20 I just see 1 Alert triggered at 3am.
    Is there any way to set this alert to trigger every period of time?
    thanks.
    regards,
    Filipe Vasconcelos

    Hello,
    first it would be good to clarify which monitor are you implementing - there are multiple RFC monitors - for example:
    Availability and Performance Overview Monitor :
    http://help.sap.com/saphelp_nw70/Helpdata/en/ae/cd823bd26a5c42e10000000a114084/frameset.htm
    Transactional RFC and Queued RFC Monitor
    http://help.sap.com/saphelp_nw70/Helpdata/en/8b/ceea3b31aac554e10000000a114084/frameset.htm
    Best to type the name of monitor as displayed in RZ20.
    Based on the type of monitor you might find the answer here:
    http://help.sap.com/saphelp_nw70/Helpdata/en/f6/c55c3bab977239e10000000a114084/frameset.htm
    (for example for status monitor you can set option "When should a message trigger an alert?" to "Always (at every message)")
    Anyway I am afraid that in case you are using performance monitor there is not much you can do. Possibility can be to check if data collection method (for example function) has parameter that can do this (but I am skeptical about this) - if not then you would have to adjust data collection method or implement the monitoring in another way.
    Possibility can be to use some kind of "switch". You can activate option "Display All-Clears in Alert Browser" - this will generate green alerts. Then you can program your own autoreaction method that will perform the "switch operation" (simple insert/update/delete into some Z-table you will create - based on status of alert - red/yellow/green.) Then you can have batch job running another Z-program that is reading this value and constantly reminding use via email.
    If you program this in a good way (abstract autoreaction method) - you can reuse this solution for other monitors as well and easily buid you own email notification functionality.
    I hope it helps.
    Best regards.

  • Configuring CCMS_OnAlert_Email with CCMS

    Hi,
    I have setup CCMS_OnAlert_Email with CCMS  for transport alerts, I have also setup distribution list in client 000 but I got express message  as "Cannot process message, no route from DDIC to DEV:<client>:<userid>", please let me know how to route DDIC to other client users.
    Thanks in advance
    KVR

    I have configured in individual system, what CCMS background jobs run for transport alerts? I have configured CCMS alerts through DDIC in 000. I am assuming jobs will run with that user.
    I don't have any other users so I have configured a distribution list for forwarding the alerts. But when I am trying to send a mail from SAP business workplace using distribution list I was getting above error.
    Thank you

  • Personal Address Book of PC Integration with CCM 5.1

    Hi,
    How can I integrate my Personal Address Book of MY PC with CCM 5.1 ?

    In Cisco CallManager 5.0, the Personal Address Book and FastDials were integrated into Cisco CallManager, instead of the requirement of an IP Phone service as previous versions. From any phone registered to the 5.0 system, go into the directories, then choose Personal Address Book. After you login, then you can choose either the address book or the fast dials. This is also configurable from the Cisco CallManager User page of the Cisco CallManager

  • Installing Locale Installer with CCM 5.1.2

    Hello, I need add the locale installer Spanish's in a cluster CCM with version 5.1.2.
    In the download's page only avaible the version "cm-locale-es_ES-5.1.1.1-1.cop.sgn", I'm trying upgrade with version 5.1.1, it's fails.
    For version CCM 5.1.2, can be updated with version 5.1.1 of locale to installer?
    If a new version of locale is necessary to installer, somebody it has some forecast of date?
    Thanks!!!

    It should work. I've installed Polish locales cm-locale-pl_PL-5.1.1.1-1.cop.sgn with CCM 5.1.2 and 5.1.3. Both versions work without any problem.

  • How to diagnose problem with CCMS?

    RWB -> Component Monitoring -> Integration
    I have a red flag on  CCMS Status Last Retry Jan 24, 2006 5:15:03 PM
    How to diagnose what is wrong with CCMS?

    Which o/s are you using??
    We had this problem on windows 2003, and the SAPCCMSR.00 service was not running. I started the service manually and this corrected the error.

  • Is SRM Mandatory with CCM?

    Hi,
    Is it mandatory that SRM needs to be used with CCM? If I look at the architecture I can do a stand alone install of SAP CCM on a WAS. So, If want to have the functionality of CCM alone, can I implement CCM alone?
    Does SAP sell CCM individually?
    Please let me know your thoughts?
    Regards,
    Ravi

    You can use CCM with ECC only without other SRM components.
    Functionality of CCM 2.0 is mostly oriented to SRM, but CCM 3.0 will support also CRM processes.
    As CCM consists of two components Catalog Authoring Tool (CAT) and Catalog Search Engine (CSE)
    There are three mayor possibilities for deployment of CCM within SRM solution.
    1. On same WAS as SRM Server (EBP)
    2. Two WAS installations one SRM Server one CCM (CAT + CSE)
    3. Three WAS installations - one SRM Server, one CAT, one CSE
    As you can see from second and third deployment option CCM can be installed individually.
    HTH
    Gordan

  • Can i have IVR feature with ccm 6.0.1 integrated with cisco unity connection 2.0.1

    Hi
    can i have IVR feature with ccm 6.0.1 integrated with cisco unity connection 2.0.1.
    And tell me a solution  how can i go for IVR with this design.
    Thanks.
    veera.

    Yes, you can have a basic IVR with CUC, no one can tell you how to design your CUC, that's up to you and your requirements.
    All you need are call handlers, caller input and greetings.
    If you need someone to do all this for you, engage with a local Cisco partner.

  • Can MDM installed along with CCM 2.0

    Hi,
    We have SRM Demo server, where currently we installed CCM. Can we install MDM along with CCM or is it mandatory to uninstall CCM before we install MDM. Please advise on this.
    Regards
    G GL

    Hi,
    You can play with several & different catalogs in SRM, so you can have CCM in your SRM system and also access to an SRM-MDM catalog.
    I hope this helps
    Best regards

  • Using Video advantage with IP Communicator on CME 4.0

    I am having issues getting video advantage to work with IP communicator. I am using VA 2.0.2.0 and IPC 2.0.2.0 and CME 4.0. I added the commands
    voice service voip
    h323
    call start slow
    telephony-service
    service phone videoCapability 1
    call-park system redirect
    create cnf-files
    and added the video command under the ephone. If you have any suggestions I would appreciate it.
    Thanks,
    Andrew

    Paal
    I am not using Call Manager. I am using Call Manager Express. There is no version 4.1 the documentation says that it should work with 4.0. that is the latest version of CME. Do you have any insight on this.
    Thanks,
    Andrew

  • Plain Http adapter Monitoring with CCMS / Alerting framework

    Hello all,
    Can you explain me the optimal way to monitor process using plain http adapter (Sender AND Receiver).
    My goal is to push issue information as soon as possible to monitoring team (via CCMS) when the process is in error.
    During my tests, I ve had a lot of messages with ICM HTTP error 110 but Integration engine did not trigger any alert.
    Thanks for your help.

    Hi,
    Check this link for ICF trace.
    http://help.sap.com/saphelp_webas620/helpdata/en/2d/64d041e74911d6b2e400508b6b8a93/content.htm
    /people/arulraja.ma/blog/2006/08/18/xi-reliable-messaging-150-eoio-in-abap-proxies
    /people/michal.krawczyk2/blog/2005/05/10/xi-i-cannot-see-some-of-my-messages-in-the-sxmbmoni
    regards
    Aashish Sinha
    PS : reward points if helpful

  • Cisco VT Advantage with IP Communicator

    Trying to use VTA with Communicator 2.0(1). When I click on the Video Icon on Communicator, the following message appears "Cisco Video Advantage version 2.0(1) is required to work with Communicator 2.0(1). I can't find VTA 2.0(1) on Cisco's site. Is this error message correct?
    Thanks!
    joe

    Dear All
    yes IP communicator 2.0 supports Video telehpony
    refer link below more details , it works
    http://www.cisco.com/en/US/products/sw/voicesw/ps5662/products_data_sheet0900aecd8044de04.html
    regards
    lalit

  • Problem with CCMS PI7.1 alert configuration for RWB Alert count

    Hi,
    We have configured CCMS alert for PI7.1 RWB failure count. Alert is getting triggered only one time and after that no alerts. I can see the change in data but alert is not getting triggered. If I complete the alert then immediately in next run a new alert is generated with last reported data and then again there will be no alert going forward. Data is collected but no alert is triggered. Does anyone know the reason for this and how to fix it? Please help.
    Thanks,
    Kavitha Rajan.

    Hi Jayan,
    Our PI alert configuration is fine. And also we did not choose multiple suppress method. Problem is with Solution Manager CCMS PI alert configuration for failed RWB count. After initil alert and then nomore alerts are triggered. If I complete the alert then again only first alert is triggered and again no alerts going forward. Please advice.
    Thanks,
    Kavitha Rajan.

Maybe you are looking for

  • Regarding the error ORA-01841: (full) year must be between -4713 and +9999,

    The issue is the code is not inserting the good records into the MIE table. This is becasue of the error 'OtherError GFSTM_INS_SNURK_NEW_TABLES_PA.gfstm_ins_asn_journal_pr:ORA-01841: (full) year must be between -4713 and +9999, and not be 0' This err

  • Invoking BPEL Process from a JSP Page 500 Internal Server Error

    Hi, I try to invoke a BPEL Process from a JSP Page and receive the following error. I just pasted the example from the Oracle PM Developer's Guide tutorial. Previously I deployed the CreditRatingService BPEL Process. Can anyone help me, please? D. He

  • Problem with execution order

    Hi @ All I've a class with a constructor. This constructors calls some webservices etc to fill in his attribute data automatically. Now i need Flex to wait for finish all this things, because i read the attribute datas out of the class after some oth

  • Question about blend modes

    I have a video clip of a guy in front of a white screen (originally it was a green screen but I replaced the background with a white wall). I want to add a graphic behind him and I am not sure which blend mode to use. The graphic is also based on a w

  • Submit timeout

    I have a submit button in my PDF form where I submit the PDF file to a PHP webpage. It works fine if the PDF is about 700K in size, but now I have a PDF that is 1.5 Meg and when I submit it, it now returns back a 'Timeout' error. Is there any way to