VT02N's Deadlines are not updating correctly in the background by BDC...

Hi all,
I have this Incoming IDOC that will perform a direct BDC on VT02N.
This BDC will update VT02N deadlines : Shipment and Loadings dates...
However, it comes out error "End Date Precede Start Date"
When I manually put in, it works...
And I have check my BDC coding... its getting and giving the values correctly into VT02N...
Strangely ->
1. If i run the idoc manually and do the BDC screen in the foreground ... VT02N updates correctly
2. If i run the idoc in the background (run by a batch program) ... VT02N gives 'End Date Precede Start Date' error...
Have anyone come across such an error...?
Thanks,
William Wilstroth

Solution : The Handling Date variables that is holding values in the IDOC need to be clear at the end of the IDOC. (Own logic mistake)

Similar Messages

  • Recordmode data are not updated correctly

    We currently have an issue while using the 3.x data flow in BI 7.0. The same also holds with 3.x versions of BI.
    Suppose you have an ODS sending data in an InfoCube. When you initialize the delta process with data transfer then the recordmode field in the communication structure contains null values even though in the change log table of the ODS it has values. This behaviour does not hold when you send further data with deltas.
    We want the recordmode data to be updated correctly since we use them in a condition. Does anybody know about this problem?
    Best regards
    Theodoros

    Hi again,
    the problem is also not related with any kind of mapping. We are just sending some data from an DSO to an InfoCube. Recordmode values are maintained correctly in the change log table of the DSO. Nevertheless, they are not updated correctly in the InfoCube's update rules communication structure unless we are uploading deltas. My question is why they are not updated also correctly when we are doing an initialization of the delta with data transfer.
    Thanks anyway
    Theodoros

  • HT201070 Since my last update RAW - Files from Nikon D800 are not shown correctly in the Finder as small prewiev. Can anybody help ?

    Since my last update  to 10.8.4 RAW - Files from Nikon D800 are not shown correctly in the Finder as small prewiev. Can anybody help ?

    update 10.8.5 solved this problem. Thankyou anyway.

  • My pc has a virus I just downloaded song from pc to kids ipods now both ipods are not working correctly could the virus be in the ipods,  if not why are both not working doing the same thing right after unplugging from pc.

    Can an ipod get a virus from a pc that has a virus.  After connecting two different ipods to my pc to download music they both are not working correctly, could the virus have transferred to the ipod,  if not why would both ipods not work and be doing the same thing?  When trying to click on a game it just stays on the main screen.

    - I have not heard of a virus that can cause problem with an iDvice that has not been jailbroken.
    - Try resetting the iPods. nothing will be lost.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Do you hve problems with one game? The same game on both iPods?
    Other apps?

  • ICloud playlist are not updated correctly, iCloud playlist are not updated correctly

    I have configured multiple iTunes playlists on my iMac (which is using iTunes Match).
    Some of these are not properly updated on my iPhone 4S.
    For example I had a playlist folder Genre and in there a Sports (just a simple playlist, not even a smart one).
    I decided to move the Sports playlist to the toplevel so that I can more quickly access it when running.
    Well this playlist just remains in the Genre folder on my iPhone... I tried killing the Music.app, rebooting the iPhone.
    Nothing works.
    I renamed the folder from Genre to Test on my iMac and now I see the Sports list in the Test folder on my iPhone.
    What is going on ? How can I properly organize my playlists/smartplaylists so that they sync correctly (including re-arranging or renaming playlists) ?

    When I disable iTunes match on my iPhone4S, quit the Music.app and then re-enable the iTunes Match on my iPhone4S it suddenly starts working. I don't want to do that everytime I changed my playlist on my iMac!!!

  • F.08 Report - GL Balances are not updating correctly

    Hi,
    1. we have uploaded GL Balance of 2007 in 2008 before GO-Live.
    2. In 2008 - we have carried forward the GL balances to 2009
    3. But if we see F.08 report for 2009, it is showing not showing 2008 accumulated balances as carry forward balances.
    4. This report is excluding the data migration balance and only showing posted values (Data migration balances are also posted with 2008 dates, But it is showing all balances of 2008 except the data migration documents posted in 2008)
    5. How can we fix this issue? why it not carry forwarding all the balances of 2008 including Data Migration balances?
    Kindly help me
    Thanks
    Kishore

    Checke whether they have executed year end balances carry forward for GL & Customer,Vendors. It will solve the problem.
    Thanks
    Kishore

  • Photoshop CS6 - Spot channels are not saved correctly in the psd files.

    Hi,
    I'm using Photoshop CS6 and something happent a few days ago....some Windows or Adobe update messed up everything...I don't know...
    Here's how things are.
    If I add to an image a couple of new spot channels (any Pantone color) and remove the informations from the CMYK channels (or not-the problem it's there anyway), I should have an image with 6 color plates (CMYK and the 2 Pantone). It doesn't happened anymore...
    I'm using Corel to print the files and the previous saved files are fine, I have all the Spot colors there. Now, If I edit any file I've worked on before, and save it again, the spot colors dissapear when I'm importing the psd file in my Corel document. And if there is no information on the CMYK channels, I'm getting a blank image...
    I hope someone will give me some ideas because I don't know what to do anymore...
    Codrut

    Right. It's not reading these new saved files correctly. The old ones are fine.
    I forgot to mention one thing. I've got this CS6 as an upgrade and I still have the CS5 one running on the same computer. The CS5 version does the same thing...
    Today I tryed again to open a PSD (CS6) with another CS5 version from another computer and came with an error message "Could not complete your request because the specified color book cannot be found". And the file didn't opened....
    Who messed up my color book and how can I fix it?

  • Multiple days training not updated correctly in the Outlook calendar

    Hi Friends,
    We have a requirement to integrate training event booking data with the Outlook Calendar. We have achieved it by sending an appointment to outlook by using a standard class CL_APPOINTMENT. All the details are getting updated as needed.
    If the training is for a single day then the appointment/invite sent from SAP to Outlook updates the Outlook calendar correctly with the date, time and other details. But if the training consists of several different days, it creates one long calendar reservation instead of one for each planned training day.
    For example if the training days are on 15.09.2014, 16.09.2014, 13.10.2014, 14.10.2014 and 28.10.2014, then the outlook calendar reservation is done right from 15.09.2014 to 28.10.2014. instead of only the planned training days (15.09.2014, 16.09.2014, 13.10.2014, 14.10.2014 and 28.10.2014).
    So the calendar needs to be updated for that particular day with the particular time.
    Please share your expertise if anyone has faced such an issue.
    Thanks in advance.
    Regards,
    Vish

    Closing the thread. Custom solution provided.

  • Fonts are not diplayed correctly in the Crystal Report Viewer control

    Post Author: Farid
    CA Forum: General
    Hello,
    I have designed a report in the Crystal Reports XI Designer (version 11.5.3.417) using the default printer. When I view it through the preview mode of the Designer, fonts are displayed like expected using the default printer driver.
    Now, I view this same report at run time in the Crystal Report Viewer control on the same computer with the same default printer. Fonts appear then differently they were in the preview mode : sizes are differents and some texts are truncated. It seems that the default printer driver are not used.
    Can anybody tell me if this behaviour is normal ? If it is the case how should I do to display a report in the Report Viewer using the default printer driver like I have specified it in the Designer.

    Post Author: V361
    CA Forum: General
    You may want to select the "no Printer" option instead, this will force CR to use a higher resolution.  Look in page setup, printer options.

  • Data is not updating correctly in the cube 0PA_C01

    Hi,
    I am facing one problem in the Cube 0PA_C01 related to the "Headcount and Personnel Actions" in the HCM module.
    I have loaded all the master data and transaction data in the cube and i activate the queries also but when I am executing the queries it is showing me 'No applicable data found' and when I am seeing data in the cube the data is there but only employee field is updating remaining fields are blank and 0 values is there even I activated the master data then also I am facing the same problem.
    Please help me out..
    Nitesh.

    IF is there in infocube, then it is problem with the query, check out filters or variables.

  • Custom headers are not exported correctly in the bindings for the WCF-WebHttp adapter

    I have an annoying issue with the bindings for the WCF-WebHttp adapter.
    As you know, the "Messages" tab of the WCF-WebHttp transport properties enables a developer to configure a number of static outbound HTTP headers. When I've entered two or more headers in the textbox, the CRLF between individual headers will be
    stripped after a bindings import. This means I cannot call RESTful services that require more than one custom HTTP header in a messaging-only scenario, because BizTalk goofs up the configuration.
    For example, when I enter the following headers in the textbox:
    Then export the bindings, and immediately import the bindings again (untouched), the textbox now shows:
    I did some brief analysis, and within the binding file's XML, the HttpHeaders property (contained in the TransportTypeData element) is not encoded/escaped in any way, so therefore the significant whitespace (in this case CRLF) that needs to be preserved
    is lost in the import process.
    Can anyone reproduce this and can anyone think of a workaround (without resorting to an orchestration)?

    I did some brief analysis, and within the binding file's XML, the HttpHeaders property (contained in the TransportTypeData element) is not encoded/escaped in any way, so therefore the significant whitespace (in this case CRLF) that needs to be preserved
    is lost in the import process.
    +1

  • Shaped layers are not updating in ae after changing them in Photoshop

    I created a photoshop CS3 file that has a grid and 3 layers with editable shapes (a graph that has to be changed daily). When importing them into AE CS3 as a comp cropped layers, After Effects sees the layers and layer masks correctly. The problem is when we go back into photoshop and only change the points on the shape layers, save the file, and open the saved After Effects file, the shaped layers are not updated. Even the reload footage does no avail .
    Steps to reproduce issue
    1. Create a layer in photoshop and make a shape
    2. Save the photoshop file.
    3. Import the Photoshop file in After Effects as a comp
    4. Save the After Effects Project
    5. Reopen the photoshop file and edit points on the shape layer.
    6. Save the Photoshop file
    7. Open the After Effects project.
    8. The SHAPE layer WILL NOT UPDATE. The mask is still the same as the original first saved file.

    No, they don't. Andrew is correct. Once imported, shape paths from PSDs will become masks and those have no relation to any external reference items. They are AE-internal. The apparent question is, how complex your graphs are. If you check out one of my old tutorials on creativeCOW you can find a line chart rigged with expressions and thus fully editable from within AE. Similar projects can be created for other chart types and in fact I had several of them already on my website (and will provide them again, if and when I get around to finally updating it). Also do not forget that you could use plugins such as Digital Anarchy's Data Animator (now owned by Red Giant and being reworked into an updated version called Datamator)...
    Mylenium

  • Problem in pricing conditions are not updated in BAPI_SAG_CHANGE

    Hallo Friends,
    we have faced the one problem with the standard bapi *BAPI_SAG_CHANGE.
    we have passed the 10 item level data to the BAPI_SAG_CHANGE , the bapi BAPI_SAG_CHANGE successfully updated the 10 item level data to the schedule agreement .
    the problem is  pircing condtions are not updated succesfully for the each items in the schedule agreement.
    please suggest the good solution.
    thanks
    kumar

    Hi jons,
    Thanks for respoding my request, Please find my below code lines
    CALL FUNCTION 'BAPI_SAG_CHANGE'
            EXPORTING
              purchasingdocument           = st_header-number
              header                       =           st_header
              headerx                      = st_headerx
            VENDOR_ADDRESS               =
            HEAD_EXPORT_IMPORT           =
            HEAD_EXPORT_IMPORTX          =
            TESTRUN                      =
            TECHNICAL_DATA               =
         IMPORTING
            EXP_HEADER                   =
            EXP_HEAD_EXPORT_IMPORT       =
           TABLES
                    return                = st_return
    Begin of modify by kirankumar 07/12/2009
                   item                  = st_item
                     item                  = st_item[]
    End of modify by kirankumar 07/12/2009
                    itemx                 = st_itemx[]
                    account               = st_account
         accountprofitsegment  = st_accountprofitsegment
                    accountx              = st_accountx
                    schedule              = st_schedule
                    schedulex             = st_schedulex
                    sc_component          = st_sc_component
                    sc_componentx         = st_sc_componentx
                    shipping              = st_shipping[]
                    shippingx             = st_shippingx[]
         shipping_exp          = st_shipping_exp
                    delivery_address      = st_delivery_address
                    item_cond_validity    = st_item_cond_validity[]
                    item_cond_validityx   = st_item_cond_validityx[]
                    item_condition        = st_item_condition[]
                    item_conditionx       = st_item_conditionx[]
                    item_cond_scale_value = st_item_cond_scale_value
                    item_cond_scale_quan  = st_item_cond_scale_quan
                    export_import         = st_export_import
                    export_importx        = st_export_importx
                    item_text             = st_item_text
                    header_text           = st_header_text
                    head_cond_validity    = st_head_cond_validity
                    head_cond_validityx   = st_head_cond_validityx
                    head_condition           = st_head_condition
                    head_conditionx       = st_head_conditionx
                    head_cond_scale_val   = st_head_cond_scale_val
                    head_cond_scale_quan  = st_head_cond_scale_quan
                    partner               = st_partner[]
                    partnerx              = st_partnerx[]
         extensionin           = st_extensionin
                    extensionout          = st_extensionout.

  • Scientific fluorescence figures are not displayed correctly on iPad

    I use the iPad 1 for reading scientific papers, and I figured out that some fluorescence figures are not displayed correctly. The colours are not correctly distinguished, even some colours are completely missing. Is this a limitation of the iPad display or the current version of iOS.
    I am really disappointed. So, is there any solution?
    Many thanks.
    On MacBook Pro
    On iPad 1

    I am woundering if anyone can suggest any solution? Thank you.

  • Asset shift factor not updating assets in the asset history list

    Recently we had updated the Asset shift factor for June 2011, but the factor has not been updated in the assets.
    If we check through OA02 then the factor is updated there , but if checked in AS03 after executing and releasing the worklists generated by S_ALR_87011990 then these are not updated and displaying the old factors.
    please guide.

    Hi,
    the asset history sheet shows what is defined in the  "history sheet version"
    -> Tr. OA79.                           
    Here you can define the columns.                                               
    Double click on the column. Here you ca see which history sheet group are assigned. The assigned transaction types are displayed in the asset history sheet.
    History sheet groups you can check in (TABW-GITTGR and TABW-BWASL).  
    regards Bernhard

Maybe you are looking for