VTDR-128 fx5600 - No Color Red on VGA plug (d-sub port)

okay, i have a couple other posts here and i've decided to clean up my plea for help a little bit because i've solved the worst of my problems and, being more educated, can explain things a little easier.
i will recap my experiance now:
2-3 months ago i bought my spanking new VTDR-128 fx5600 card from a well known vendor. i was given a period of 2 weeks for vendor RMA, but i waited too long as this card was intended for a system i was building for someone else. when we finally were able to test it:
1: system would crash within five minutes, max.
2: no color red output from the monitor plug (d-sub port?)
3: bad, horrible artifacting in all games and even during low resolutions 2D windows usage. after power off, card heatspreader could almost burn my finger if i touched it.
4: color looked fine on both tv-out dongle and dvi > CRT adapter that came with the card, if only i could boot for more than a few minutes at a time
i wish i had taken pictures, but one day, i was convinced the card was "dead" and i decided to take the cooler off and put it on an older card i have. i carefully removed the cooler front, then back, and noticed on the back, one of the ram chips was a smudge of thermal interface material (in the pins and such, on other components as well)
i was astonished, i jumped with glee, and spent 45 minutes with a fine bristled brush. after many inspections with a magnifying glass, and almost half a can of maxell "blast away" canned air, i put the card in my computer, re-loaded the newer drivers, installed all the msi software, and proceeded to run benchmarks!
i was so happy i could pee my pants. somewhere in the manufacturing process i think something got a little messed up and the thermal paste was smudged. even with hefty overclocks the cooler doesnt feel NEARLY as hot as my old ti4200.
many people have been disappointed with performance from this card, but i am very impressed! i was able to run halo before at ~20-30FPS, now i'm getting 50 and things are much prettier. its added 4000-6000 to my aquamark score, and i went from 11000 to 16000 in 3Dmark2001SE.
the reason i'm posting again is because i want the vga plug to work. nview dualview does not work with the DVI adapter and i use my TV for gaming. so if i want to game i have to deal with the monitor having no color red.
this card has been tried now in 3 systems, with 3 different monitors and the color RED is not visible on any (with the vga plug (d-sub))
i am forced to believe nothing is wrong with my system, and it relies solely on a mistake made in manufacturing. the card overheated and crashed and burnt before i took the heatspreader off, after cleaning the paste off it works perfectly.
so, maybe GlennVidia will be kind to tell me if:
MSI will help me fix or issue a replacement. i doubt this has happened too many times before, i am probably one out of a million buying a graphics card with this mistake.
i've made many attempts at contacting MSI support, and i've read through faqs and KB so many times i could write an encyclopaedia.
do you think MSI would even admit a mistake, i am betting that first they just tell me "i voided my warranty". that makes me want to cry! i emailed them 5 times so far, and they only tell me to "RMA with vendor" and "test in another systems" even after i explained everything...
::sigh::
i'd do anything to get this card working, i love it regardless of it's redless vga!

[ 13.093] (==) No Layout section. Using the first Screen section.
[ 13.093] (==) No screen section available. Using defaults.
[ 13.093] (**) |-->Screen "Default Screen Section" (0)
[ 13.093] (**) | |-->Monitor "<default monitor>"
[ 13.093] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
First step would be to create the necessary entries (easier to make a complete xorg.conf versus xorg.conf.d/##-whatever.conf).
All Desktop Environments / Window Managers rely on X. Man pages are helpful, possibly some headaches ahead as I fought a dual-monitor display this way.
I currently run a xrandr script to switch displays on my hp pavilion: https://wiki.archlinux.org/index.php/Xrandr#Scripts
Check it out.

Similar Messages

FX5600 VTDR-128 performence

Hey guys, i jsut got HALO for pc and tried it out on my FX5600 VTDR128
it runs VERY slow, so i had to turn the graphics all the way down and need to run it at 800x600. is this just the video cards slowness? or could it be somethnig else with my system?
I have a :
amd athlon xp 2500+ barton
asus a7n8x deluxe
1gb ddr400 ram
80gb WD hardrive
msi geforce fx5600 vtdr-128 video card
benq fp767 17" lcd monitor (16ms response time)
Im jsut wondering, is this the performence i should be having? or is it a little slow?

yup
what are your system specs? what kind of processor how much ram?
i have not personally bought the game yet, but i have read two reviews that stated unless you have a bawlin system running top speed, your framerates are gonna be very unsatisfying. its not a problem with your card or even the drivers, the game was written poorly with mid-range systems in mind. the fact that this is a 2 year old game, makes this situation EXTREMELY disappointing. yes, the developers had to port it over to the PC platform, but if you wanna look at it like that, the XBOX is the closest console there is to a PC. they had 2 years to tweak this game, even with a FEW improved graphical effects, it is STILL running on technology that is 2 years old. GeForce 3 graphics + some more current pixel and vertex shaders, and the game CHOPS like a cooking show on the food channel. very disappointing. maybe there will be patches to the game in the future to deal with this situation. for now, you're stuck like the rest of us unless you upgrade to some serious firepower. sorry, it sucks.

MSI FX 5600 VTDR 128 VGA card, Pinnacle 8.8.17 SE REBOOTS Windows XP when it renders.

The Problem is that once video is captured by the MSI FX 5600 VTDR 128 VGA card, Pinnacle 8.8.17 SE crashes Windows XP when it renders.
I am using the latest MSI 44.03 drivers and the WDM drivers as shown in Windows XP system properties, hardware, are 2.0.3.0 09/04/2003.
The VGA card is set to CLONE mode and OVERLAY controls to FULL SCREEN DEVICE = SECONDARY DISPLAY, to get video output using thesupplied 9-SSCCR adaptor and
S-VHS cable to an analog VCR.
IF I DISABLE THE OVERLAY CONTROLS, RENDERING COMPLETES, XP DOES NOT REBOOT, BUT I CAN NO LONGER EXPORT TO THE VCR!!!!
I would appreciate any assistance or explanation.

Richard,
Thank you for your speedy response.
The information you requested is as follows:
IRQ Numbers
IRQ 1 Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
IRQ 3 Communications Port
IRQ 4 Communications Port
IRQ 6 Standard floppy disk controller
IRQ 8 System CMOS/real time clock
IRQ 9 Microsoft ACPI-Compliant System
IRQ 10 MPU-401 Compatible MIDI Device
IRQ 12 Microsoft PS/2 Port Mouse (IntelliPoint)
IRQ 14 Primary IDE Channel
IRQ 15 Secondary IDE Channel
IRQ 18 Silicon Image SiI 3112 SATARaid Controller
IRQ 19 MSI MS-StarForce GeForce FX 5600 (NVIDIA GeForce FX 5600)
IRQ 19 Adaptec AIC-7850 PCI SCSI Controller
IRQ 20 NVIDIA(R) nForce(TM) Audio Codec Interface
IRQ 20 NVIDIA PCI to USB Enhanced Host Controller
IRQ 21 OHCI Compliant IEEE 1394 Host Controller
IRQ 21 NVIDIA nForce MCP Networking Adapter
IRQ 21 3Com 3C920B-EMB Integrated Fast Ethernet Controller
IRQ 21 Standard OpenHCD USB Host Controller
IRQ 22 NVIDIA(R) nForce(TM) MCP Audio Processing Unit (Dolby(R) Digital)
IRQ 22 Standard OpenHCD USB Host Controller
PSU detail.
AOPEN FPS300-60PN(PF)
+3.3v DC 28A
+5v DC 30A
+12v DC 15A
+5v DC sb 2A
-5v DC 0.3A
-12v DC 0.8A.
Any comments would be much appreciated.
Another issue I have relates to video captured by the MSI FX 5600 VTDR 128 VGA card showing distortion or tearing in the bottom lines.
I am trying to capture, using an MSI FX 5600 VTDR 128 VGA card, I am using the latest MSI 44.03 drivers and the WDM drivers as shown in Windows XP system properties, hardware, are 2.0.3.0 09/04/2003.
The capture system is PAL, I have selected PAL-I, my video sources are either an analogue VCR or an analog Camcorder. I use the analog VIDEO IN or the S-VHS IN of the supplied 9-SSCCR adaptor.
The software packages I have used are Pinnacle 8.8.17 SE, Intervideo WinProducer 2.0 or MSI Media Centre II deluxe (including patch).
Thanks for your support.
Sincerely,
Haroon Sheikh.

MacBook Pro attached to a projector and won't show the color red

Running 10.5.8
When running through a projector to give a presentation the color red has disappeared. The first time it happened I calibrated with the Color Munki and all was well, for a while. Now the Color Munki can't calibrate it anymore.
I've tried two different projectors (both work with another laptop)
tried two different cables and
two different connectors.
Also tried different calibrations.
Today we ran disk utilities and that worked great, for an hour or two.
I would very much appreciate any help possible.
thanks,
Amy

Thanks for your reply.
I just went and checked and the cable is inserted snuggly on all ends. I tried giggling it a bit to see if anything would change. Then I switched cords and connectors and nothing changed. Checked all was connected tightly.
Is it possible that both DVI to VGA connectors are bad? Or do you think it is from the connection inside the laptop? And is there any way to check?
~Amy
And here's a bit more info. I just went to check things again. I turned everything on again. Bad color. As I was sitting pondering things the good color popped back in. Nothing moved anywhere. Just as I was commenting to my husband that the color had come back, it went away again. Still no movement anywhere.

Fx 5600 vtdr 128 mb or gforce 4 ti 4800 vtd

HELLO , I AM FROM BRASIL AND I WANT TO KNOW WICH
VIDEO CARD IS THE BEST FOR GAMES ???
FX 5600 VTDR 128 MB or GFORCE 4 ti 4800 VTD ??
Thank you.

Generally the Ti4800, in some cases if your running with AA the FX5600 could be faster.
An FX5600 Ultra or Radeon 9600 Pro would be better if you can afford them, or even better a Radeon 9700 (non pro).

My MBP Retina doesn't allow the use of two Thunderbolt to DVI adapters. It only works with one TB - VGA adapter and one TB - DVI adapter. However now the color on the VGA connected monitor is slightly different.

The monitors are Viewsonic VA2406m-LED. The Display preferences show all three monitors but one monitor always says "No Signal" if they are both connected TB -> DVI.
The Color on the VGA connected one is slighly off. It seems like I should be able to connect two DVI monitors not sure why this is stopped. Does it have something to do with the Graphics card?

The problem was with the newEgg adapter. I just went to the Apple Store and bought an Apple adapter and the monitor now displays correctly.
For future reference, in case anyone experiences this problem:
the newEgg adapter is part number 9SIA1PU0P88920, described as a Thunderbolt Mini Displayporrt Display Port DP to DVI Adapter for APPLE Macbook Pro Air and the full description says it works for macbook pro, etc.
when this adapter is used, the macbook pro recognizes the monitor, but the monitor displays nothing.
When the apple adapter (MB507Z/B Mini Display Port to DVI Adapater) is used, the monitor displays correctly.
Of course, the individual newEgg part might simply be defective, but I doubt it. moral -- spend the extra $$ and buy the Apple adapter.

font color=red Create/Modify forms and triggers through C++ using OPEN API


Dear brothers/sisters
 
Please help us to find the linking problem.
 
We have to add PRE-FORM trigger to many FMBies. We have thousants of FMBies. So opening one by one is difficult. For this we are using OPEN API and BORLAND C++. We have coppied all header files from D:\orant\FORMS60\API.
But there is a link error. Here is the snippet.
 

 #include <stdio.h>
 #include <stdlib.h>
 #include <malloc.h>
 #include <d2fctx.h> /* Forms API context */
 #include <d2ffmd.h> /* Form module header file */
 int main (int argc, char *argv[])
 {
 d2fctxa ctx_attr;
 d2fctx *ctx;
 d2ffmd *form;
 text *form_name;
 /* Check arguments */
 if ( argc != 2 )
 {
 fprintf(stderr, "USAGE: %s <filename>\n", argv[0]);
 exit(1);
 }
 /* Create Forms API context */
 ctx_attr.mask_d2fctxa = (ub4)0;
 if ( d2fctxcr_Create(&ctx, &ctx_attr) != D2FS_SUCCESS )
 {
 fprintf(stderr, "Error creating Forms API context\n");
 exit(1);
 }
 /* Load the form module into memory */
 if ( d2ffmdld_Load(ctx, &form, argv[1], FALSE) != D2FS_SUCCESS )
 {
 fprintf(stderr, "Failed to load form module: %s\n", argv[1]);
 exit(1);
 }
 /* Get the name of the form module */
 if ( d2ffmdg_name(ctx, form, &form_name) != D2FS_SUCCESS )
 {
 fprintf(stderr, "Error getting the name of the form module\n");
 }
 else
 {
 /* Print the name of the form, then free it */
 printf ("The name of the form is %s\n", form_name);
 free(form_name);
 }
 /* Destroy the in-memory form */
 if ( d2ffmdde_Destroy(ctx, form) != D2FS_SUCCESS )
 {
 fprintf(stderr, "Error destroying form module\n");
 }
 /* Close the API and destroy context */
 d2fctxde_Destroy(ctx);
 return 0;
 }
 

 
The compilation is success. But there is a link error. Please help us to find the problem.
 
Here is the error Message.
 

 Borland C++ 5.5.1 for Win32 Copyright (c) 1993, 2000 Borland
 FIRST.CPP:
 Turbo Incremental Link 5.00 Copyright (c) 1997, 2000 Borland
 Error: Unresolved external '_d2fctxcr_Create' referenced from D:\API\FIRST.OBJ
 Error: Unresolved external '_d2ffmdld_Load' referenced from D:\API\FIRST.OBJ
 Error: Unresolved external '_d2ffmdgt_GetTextProp' referenced from D:\API\FIRST.OBJ
 Error: Unresolved external '_d2fctxde_Destroy' referenced from D:\API\FIRST.OBJ
 
Could you please help us....... 


Dear brothers/sisters
 
Please help us to find the linking problem.
 
We have to add PRE-FORM trigger to many FMBies. We have thousants of FMBies. So opening one by one is difficult. For this we are using OPEN API and BORLAND C++. We have coppied all header files from D:\orant\FORMS60\API.
But there is a link error. Here is the snippet.
 

 #include <stdio.h>
 #include <stdlib.h>
 #include <malloc.h>
 #include <d2fctx.h> /* Forms API context */
 #include <d2ffmd.h> /* Form module header file */
 int main (int argc, char *argv[])
 {
 d2fctxa ctx_attr;
 d2fctx *ctx;
 d2ffmd *form;
 text *form_name;
 /* Check arguments */
 if ( argc != 2 )
 {
 fprintf(stderr, "USAGE: %s <filename>\n", argv[0]);
 exit(1);
 }
 /* Create Forms API context */
 ctx_attr.mask_d2fctxa = (ub4)0;
 if ( d2fctxcr_Create(&ctx, &ctx_attr) != D2FS_SUCCESS )
 {
 fprintf(stderr, "Error creating Forms API context\n");
 exit(1);
 }
 /* Load the form module into memory */
 if ( d2ffmdld_Load(ctx, &form, argv[1], FALSE) != D2FS_SUCCESS )
 {
 fprintf(stderr, "Failed to load form module: %s\n", argv[1]);
 exit(1);
 }
 /* Get the name of the form module */
 if ( d2ffmdg_name(ctx, form, &form_name) != D2FS_SUCCESS )
 {
 fprintf(stderr, "Error getting the name of the form module\n");
 }
 else
 {
 /* Print the name of the form, then free it */
 printf ("The name of the form is %s\n", form_name);
 free(form_name);
 }
 /* Destroy the in-memory form */
 if ( d2ffmdde_Destroy(ctx, form) != D2FS_SUCCESS )
 {
 fprintf(stderr, "Error destroying form module\n");
 }
 /* Close the API and destroy context */
 d2fctxde_Destroy(ctx);
 return 0;
 }
 

 
The compilation is success. But there is a link error. Please help us to find the problem.
 
Here is the error Message.
 

 Borland C++ 5.5.1 for Win32 Copyright (c) 1993, 2000 Borland
 FIRST.CPP:
 Turbo Incremental Link 5.00 Copyright (c) 1997, 2000 Borland
 Error: Unresolved external '_d2fctxcr_Create' referenced from D:\API\FIRST.OBJ
 Error: Unresolved external '_d2ffmdld_Load' referenced from D:\API\FIRST.OBJ
 Error: Unresolved external '_d2ffmdgt_GetTextProp' referenced from D:\API\FIRST.OBJ
 Error: Unresolved external '_d2fctxde_Destroy' referenced from D:\API\FIRST.OBJ
 
Could you please help us.......

With IOS 7.0 How do you change the Color Red, that shows up on the Calendar to another color? People with certain eye problems cannot tolerate the color Red.

How do you change the Color Red, that shows up on various points of the Calendar to another color? Persons with certain eye problems have visual irritations that can be caused by the color Red. This problem came up with the update to IOS 7.0.

Sorry but you cant

How to watch tv with FX 5600 XT vtdr 128

How to watch tv with FX 5600 XT vtdr 128?

unplug the connection of the card and the monitor.
connect the card and the tv, then start the computer.

Start up and stuck with the flashing color (red green blue yellow...)

I just bought Macbook pro(My first time with Mac product) today, and when i unbox the MBP it was have a good start everything is ok, than I test the DVD drive to make sure it work or not, than i put the VCD to it. it was stuck (with the flashing color). than i dont'know what to do. I press the shutdown button around 10s the pc is shutdown...I open it again and eject the VCD, than I was stuck with flashing color (red green blue yellow...) i have try to restart many time buy pressing the button but still the same. than i keep it away for about 1hour than I open it again It was WORKING AGAIN the same as I first started, than I restart, but the same problem happen again (flashing color (red green blue yellow...).
1. I have tried to boot from DVD that come with the MBP holding C but nothing happen
2. I have tried to reset PRAM (Command-Option-P-R) not work
So what wrong with that?
Could anyone help me to fix this out?
Thank you

Solida wrote:
the flashing is the Macbook pro screen it Flashing Loop, sometime red, than suddenly change to green than yellow than loop again and again.
Notice when it first start up I see APPLE LOGO than the waiting animation round. than the random screen flashing color is happened.
Three options:
1. Call AppleCare.
2. Go to an Apple Store.
3. Go to an Apple Authorized Service Provider (AASP)

Message appears in color red "low mem warning" what is it?

When i was playing "injustice" the new popular game in the app store, a message appears in color red "low mem warning about "" min" what is it? What i can do? Is dangerous?

It must be a setting in the game itself. That is a warning that the iPad is running low on accessible memory in order to function properly in the app. In this case the game is letting you know that the iPad resources are being stretched and the game could crash. It might not, but the possibility does exist.
Is it harmful to the iPad? Not really, but it could pi** you off if you are in the middle of something in the game and the app crashes and you lose progress or achievements. I have no idea what the game is about.
You could try closing apps in the recents tray and see if that helps - although that is not supposed to matter in iOS.

I m trying to make a jcombobox that has 3 colors red, yellow and green.........its a run time error.......caus i m not getting the required output

* To change this license header, choose License Headers in Project Properties.
* To change this template file, choose Tools | Templates
* and open the template in the editor.
package Exp4;
import java.awt.Color;
import java.awt.GridLayout;
import java.awt.event.ItemEvent;
import java.awt.event.ItemListener;
import javax.swing.JComboBox;
import javax.swing.JFrame;
* @author Gursimran
public class combox extends JFrame implements ItemListener{
 public combox()
 JComboBox cb;
 setLayout(new GridLayout(10,10));
 cb= new JComboBox<>();
 cb.addItem("Red");
 cb.addItem("Green");
 cb.addItem("Blue");
 add(cb);
 cb.addItemListener(this);
 setVisible(true);
 setSize(400,400);
 public static void main(String[] args)
 combox obj=new combox();
 @Override
 public void itemStateChanged(ItemEvent e)
 if(e.getItemSelectable().equals(0))
 this.getContentPane().setBackground(Color.red);
 else if(e.getItemSelectable().equals(1))
 this.getContentPane().setBackground(Color.green);

Please post the exact error message you get.

Dynamic range of the color red in RAW files.

I have seen this issue with my 70D and my SX-50 so it seems to be an issue with Canon cameras in general (I don't know if other camera makes have this too). Whenever I photograph something that has the color red (for me I often photograph birds) the jpegs look fine but I always start with post processing of RAW files. Anywhere the red color is found I find the color saturates out very easily. I use Adobe Photoshop Essentials (PSE) for post processing and cannot get the RAW adjusted/processed to look anywhere as good as the jpeg as detail is lost when red saturates out. This is not a problem with any other color.
For now I end up opening the jpeg as RAW in PSE and start my adjustments there which give me a better picture with finer detail than starting with the original RAW file. I will post this same question in the PSE forum to see who else noticed this and what their work around is.

Re: " All digital cameras suffer from over saturation of the red channel. It is just the way they are. It doesn't matter whether it is CCD or a CMOS sensored camera."
Just for the record I have owned 1Ds2, 1Ds3, every version of 5D, etc and all have had red issued.
I now also own a Nikon D610 and there is no such issue of over saturation of the red channel in RAW. This is one reason that I shoot the Nikon over the 6D almost all the time. The added DR goes a long way. The D610 files are just easier to work with and a lot faster to reach a final image. Desaturating the red channel on the Canon files obviously causes other issues.
I am impatiently waiting for Canon to put out a camera with a comparable sensor.

Laserjet 2605dn - Won't print the color RED

My 2 year old 2605dn is acting up. When I try to print a test page made up of several colors the color red comes out orange on the left side and fads to yellow on the far right side. I have changed the toner cartridge (all cartridges are HP, no knock offs or refilled cartridges, EVER!), but the problem still exists. I printed the supplies status page and the red column shows a full cartridge but the color is a pale pink, not red.
Can someone tell me what's going on?
Is the printer failing?
Can this problem be fixed?
Thanks for any help!

Here is what to do:
http://www.reeves-hall.net/wp-content/uploads/2008/02/Fading-Red-Tones-on-Color-LaserJet-2600s-by-Do...

Color{red:255 green:0 blue:0} is not working?

In the following code I tried to use Color{red green blue} to set the color of rectangle
is not working for me. Is there any thing wrong with my code? But if I use Color.RED
then it works. I can't figure out why setting color using Color{reg, green, blue} does not
work.
import javafx.ext.swing.*;
import javafx.scene.geometry.*;
import javafx.scene.*;
import javafx.scene.paint.*;
SwingFrame {
    background : Color.WHITE;
    width      : 600
    height     : 400
    visible    : true
    content: Canvas {
               content: [
                 Rectangle{x:10 y:50 width: 580 height: 200
                                stroke: Color{red:255 blue:0 green:0}}
              // Rectangle{x:10 y:50 width: 580 height: 200 stroke: Color.RED}
}

Thanks for qucik reply. And your suggestion worked.
Could you please point me to the location of documentation for this?
Thanks
Edited by: swamyv on Oct 13, 2008 1:44 PM

VTDR-128 fx5600 - No Color Red on VGA plug (d-sub port)

Similar Messages

Maybe you are looking for