VTDR128 problem: Fan speed

Hi!
I've installed the latest version of 3D Turbo Experience. But I can't monitor the fan speed and temperature (these two fields are simply blank). Has any one experienced this problem?
/Morten

I tried drivers 14.3 and 13:25 (msi), but the result is the same. I use amdcleanuputility.
S/N 602-V308-07SB1402050811
BIOS:
https://drive.google.com/file/d/0Bz6zA-3dSDcNRmlzRV9xWlByOWM/edit?usp=sharing

Similar Messages

R9 290 GAMING 4G - Problem fan speed Gaming mode (default)

Hello to all,
I just bought a 290 gaming oc and I have seen that the default bios profile (Gaming mode) has the fan set at 18% fixed. Even at 95 ° C runs at 18%. If I enable profile "OC mode" the fan increase in relation to temperature.
It seems to me dangerous to the life of the card and do not want to be forced to use Afterburner.
Is there any solution? is a problem of my card?
Thanks

I tried drivers 14.3 and 13:25 (msi), but the result is the same. I use amdcleanuputility.
S/N 602-V308-07SB1402050811
BIOS:
https://drive.google.com/file/d/0Bz6zA-3dSDcNRmlzRV9xWlByOWM/edit?usp=sharing

G5 Power Supply Popped - Still works but fan speeds up/slows down nonstop!

Hi,
After applying a security update for Tiger 4.11 on my G5 1.6 a few hours later my machine made a bang/pop sound. It still powers up but once running it sounds like the machine is ramping up to speed and slowing down again. It does this continuously even when machine is running. Apple hardware test reports no problems but i'm concerned. Any ideas?
Thanks.
Dan

I had a similar problem (fans speeding up then slowing down). I have iStat installed so I was able to look at the rpm's of the fan (free widget btw). My CPU fans ranged from 2500 to 3200, oscilated all day long....up, down, up, down ...every few seconds. I noticed my CPU utilization was up, which was odd since my machine was somewhat idel. Looked at Activity monitor and saw my CPU's sometimes reached 90%. The application that was using the CPU's was the printmgr. Stopped the process and everything is ok. I know it is unrelated to the popping sound but you might ck the activity monitor to see what is going on.

Fan speed problem Power Mac G5 Dual 1.8 GHz PowerPC - please help

Please HELP, I have a fan speed problem with my Power Mac G5 Dual 1.8 GHz PowerPC
This is a NOT an Intel machine. I am running Mac OS X v10.5.8
Power Mac G5 - PowerMac 7,2 - Power PC 970 (2.2) - 1.8 GHz with 2 CPUs - L2 Cache (per CPU) 512 KB - Memory 8 GB - Bus Speed 900 MHz - Boot ROM version 5.1.5b1
I have included below Links to download a sound file (.m4a) that I recorded of the fan speed problem and both a .pdf and .spx files of my system profile.
download sound file
http://homepage.mac.com/rep3/filechute/myG5dualsFans.m4a
down load .spx file of my system preferences
http://homepage.mac.com/rep3/filechute/systemProfileREP3-G5dual.spx
down load .pdf file of my system preferences
http://homepage.mac.com/rep3/filechute/systemProfileREP3-G5dual.pdf
When did the fan problem start?
After I replaced the mother board on the computer.
Why did I replace the mother board?
Because the experts at apple agreed with my diagnosis that the major crash problems & kernel panics must have some thing to do with a logic board gone bad. They would not work on it, because this Power Mac G5 dual 1.8 GHz machine is now a legacy model.
What I have done to attempt to fix my fan speed problem? yes I checked the obvious things, here is a list:
1) yes I checked to be sure that the new mother board was the same part number as the original one, and that all things that were unplugged from the old mother board - were actually plugged into the new mother board.
2) all the fans work, I can see them spinning if I use a flashlight and look at them (cover on and off to get at some of them)
3) check all RAM to make sure: a) it was installed properly b) that the RAM worked using TechTool Pro c) even started the machine with only the original RAM that came with it.
4) I installed a Temperature monitor - to see if there was something reading as very hot inside that was causing the machine to continually run the fans at a high speed. No, no heat issues that I can see. Here are the reading from the sensors in degrees fahrenheit, 2009-10-11 16:11:01 -0500
CPU A Die Temperature: 75.7℉
CPU B Die Temperature: 81.5℉
Drive Bay: 68.9℉
Main Logic Board Air Inlet: 64.8℉
Main Logic Board Ambient: 73.6℉
Main Logic Board Backside: 76.3℉
Memory Controller Heatsink: 93.2℉
Processor Card A Ambient: 77.5℉
Processor Card B Ambient: 77.0℉
5) zapped the PRAM
6) followed the SMU reset instructions for
Power Mac G5 (Late 2004)
To reset the SMU on a Power Mac G5 (Late 2004) computer, simply do the following:
• Turn off the computer by selecting Shut Down from the Apple menu or by holding the power button until the computer turns off.
• Remove the power cord from the computer.
• Wait two minutes.
• Plug in the power cord.
• Turn on the computer.
7) followed the SMU reset instructions:
Resetting the Cuda/PMU
How to reset the PMU:
• If the computer is on, turn it off.
• Disconnect ALL cables from the computer, including peripherals and power.
• If possible, move the computer to a place where you are not standing on carpet.
• Open the case and ground yourself by touching part of the metal frame inside the computer.
• Find the Cuda or PMU button
• Press the Cuda or PMU button ONCE. Do not press the button more than once before starting the computer up again.
• Wait 10 seconds, then reconnect the cables you removed in step 2 and turn the computer on.
• If the computer still does not respond after resetting the PMU, the computer may require service from an Apple Authorized Service Provider.
8) ran disk utilities, repaired permissions
9) found a setting in the system preferences that a chat room person suggested had something to do with fan speed. In Energy Saver, under options, processor performance was set to highest, I set it to automatic - this did not change anything that I could tell - BTW I checked my other G5 (a single processor that works fine) that is the setting that that it is set to, and it is nice and quiet.
10) restarted the machine, ..
11) found a Fan Control System Update - but it did not install when I tryed to install it -
12) booted from OSX install disk and ran that disk utility
13) used OnyX to fix disk permissions, clear caches and temp items
Nope - still have the same high speed fan problem. ... PLEASE HELP!!
I have been reading in the MacInTouch reader reports - found this: some one said to use this - thermal re-calibration using the Apple Authorized Service Providers' disk - but that's not available, at least I can not find it - anyone? have an answer to finding this - or can do it for me? I am in Chicago.

The Genius at the downtown apple store said that because it's a "legacy machine" they would not work on it, .. so should I push them?
Well, I personally think that's ridiculous, I'd Push them, I'd call AppleCare & talk up the chain if need be... there the ones that have or should have that Disc... man o man... Personally I'll never visit an Apple Store again in my lifetime, maybe try an independent AASP if none of that helps!..
http://tinyurl.com/ykomqkn
Man-o-man, pop my cork before I explode on that one, if I had anything to do with it I'd close that store.

MSI HD 7850 1GB GDDR5 OC edition Fan speed problem

Hello all.
I have some strange issue with my graphic card and fan i think. I have noticed that, when my monitor goes to sleep (or when I manually turn off), after few minutes (7-8-9-10) I can loudly hear GPU fan acceleration. And it happens every few minutes. So, everything is ok few minutes, and after that, again I can hear that annoying sound, the sound of accelerated fan. That happens only, but only when the monitor is switched off (whether it manually or automatically switched off).
I bought this video just 2 months ago, as well as other components of the computer. So, everything is practically new.
I have tested my graphic card with MSI Kombustor v. 2.4, and everything was fine. Temperatures, FPS, and all that stuf was fine.
I've never had a problem in any game so far. Everything working fine on high details all kind of games. Temperatures are pretty
normal. In a fact, I think that is temperature is lower than some average. I have a problem only with horizontal lines, but that is because i have monitor with VGA output. As a mather of fact, barely notice them. And, I have instaled latest 13.4 drivers. I deleted the old version with driver sweeper. And in an earlier version of driver was the same problem...
Again, the problem arises when my monitor is off. I have tested with MSI Afterburner 2.2.5 beta and GPU-Z 0.7.0.
All settings in both of programs are on default. So, that numbers at paragraph RMP, when monitor is off, max is 1563. That is 400 more than when monitor is on.
I have tried to test when is minimum usage of GPU fan is 40% (i just clicked on "user define" button on the right side of "fan speed"), and then, RMP number would be 1700 or even more.
When monitor is off:
When monitor is on:
So, everything is perfect when monitor is on, again. I don't think that is normal, and I beg for help. Is there any kind of solution to fix this problem? Please. I am thankful in advance. Sorry for my bad English.
P.S.
I wanted to upload pictures, but forum does not allow me. Or, I don't know how to do that. I only want to show values...

Usualy, i left Opera, uTorrent, Skype in backround. Then, I shut down the programs, and only programs in background are Avast 8 and Realtek Audio Manager (both are in system tray). No matter if you leave a program in the background or not, it's the same.
I really have never met with this type of problem and I have no idea how to fix that. If I complain to the seller, he would run tests like I did, and everything would be ok. And when I would told him about the fan problem, probably would have told me that everything is okay...
I don't know what to try, really...

Problem with fan speed on FM2-A75-P33

I have a problem with setting a lower cpu fan speed on my motherboard (Win7 64).
It always runs on high speed, and I can not decrease it. When I set values for min speed in ClickBios II (or manually in Bios before booting) to 0%, and desired temperature on some higher amount (60C), nothing happens. It always run on same high rpm, regardless any change of values. What can I do? Same thing with sys fan.
Live Bios says that I have latest version of BIOS and drivers.
thanks

That is odd. Only thing I can think of is maybe a conflict in settings between Click Bios and actual BIOS. One of the reasons I never use those programs. I'm not sure what to tell you, except that the fan speed settings on my board have all worked properly using standard BIOS settings.
If I was having issues I'd uninstall click BIOS and see if the issue continues. At least then you would know it's something else.

MSI Max 2 BFIR; Problems with CPU Fan speed in PC Alert!

servus...
First of all, I have Bios version 1.3 from the .de support Page.
I don´t know, why .com.tw doesn´t have this version.
But here´s my problem:
PC Alert doesn´t show a CPU-fan speed!
The northbidge fan shows the fan speed roundabout 5000.
In BIOS CPU Fan ~2500
PC ALert versions:
4.005
4.006
Any ideas?
Thanks

Thank You for the reply,
Before the latest update to PCAlert4 it was working properly, I cross checked the reported info. to that of Sandra, MBM, and in the bios.
Also the temps are only swapped between the system temp. and the CPU temp., other than that they are correct.
Thanks,
John

MSI CD53, i5 750 - Problem with CPU Fan Speed

Hello
I have problem with this counfiguration: i5 750, MSI CD53 Motherboard.
I Have processor overheating poblem. I noticed that processor easly can go up to 90C.
I check phisycal installation, and all its ok.
After that i check RPM of CPU FAN and i noticed that it cant go over 1000 RPM, so propably this is problem.
In MSI Control Center maximum i can set 1000 RPM.
I read that CPU FAN can go up to 3000 RPM.
Maybe i have something wrong set up in bios? What can i do with this?

Quote
CD53
Which board exactly do you have?
What is your current BIOS Version?
What kind of CPU-Fan are you using (3-Pin or 4-pin PWM (four wires) and which connector is it attached to?
What are your current fan speed/control settings in BIOS Setup?
Quote
I check phisycal installation, and all its ok.
Physical installation is one thing, but what about thermal paste (have you used a PROPER amount (too much thermal paste has the opposite effect))?
What about your case ventilation?
Quote
I noticed that processor easly can go up to 90C.
Please check the CPU's core temperatures with CORE TEMP, REAL TEMP or HW-MONITOR!

CPU fan speed problem -- similar to one already posted

Core i7 290
6GB SuperTalent DDR3 RAM 1333 (3x2GB)
BFG GeForce GTX 275 OC
2 120mm case fans (front/back)
Thermaltake CL-P0533 CPU cooler
Vista Home Premium 64-bit
MSI x58 Pro MoBo w/BIOS v.8.3
PCP&C Silencer 750 watt Power Supply
500GB Seagate Barracuda HDD
Yeah, I know that all that info probably isn't that necessary.
Problem: I have a Thermaltake cl-p0533 for my core i7 920. My fan runs 6000+ RPM all the time. I've tried using the overclock center, greenpower center, and the BIOS smart fan thing. In BIOS, I tried setting it to 25% idle and 50c target temp range. No dice. I've tried using speedfan and all that I got was the speed knocked down about 300-500rpm for a bit. My CPU idles at about 33c (according to speedfan and OC center). The CPU fan speed is supposed to be able to be controlled. The noise is really annoying. Any help would be most appreciated.

Quote from: cooldudeguy911 on 30-July-09, 13:51:38
Core i7 290
First, I meant 920 (I must be dyslexic or something)
Yes, the CPU fan is connected to the CPU fan power connector (according to the mobo manual). I've set SpeedFan for the same as I had my BIOS settings. I've since changed them to lower temps. I've tried SpeedFan with and without using the SmartFan feature in the BIOS enabled. My Two case fans are super quiet, so I don't use any regulation for them. So my SpeedFan settings look like this:
Speed 1 - minimum value = 25% maximum value = 100% auto variated
Temp 1 - Desired = 42c warning = 50c
Cores 0-7 = same as Temps 1 settings
I've also disabled the other temperatures for monitoring and fan control
As for the number of wires for the cooler fan, there are 4 going to the mobo.
I don't really know much about add-on fan controller parts. If that's the route I end up needing to go, any recommendations?

MSİ t2d256e rx2600xt FAN SPEED PROBLEM

Hi to everyone i ve got this msi t2d256e rx2600xt 256mb ddr3 pci ex card.my problem is,card fan speed all the time %100 level.it doesnt change up to temperature or anything.i tried install RİVATUNER,SPEEDFAN AND MSİ AFTERBURNER tool programs to manage fan speed.i install this helper programs i go to fan speed option i make manuel fan speed and i set %25 fan speed or %100 fan speed doesnt matter card fan works in same level like aeroplane engine.what do i have to do?card still underwarrantty shud i send to service or anything else?

Quote from: emrecengiz2002 on 21-March-11, 00:26:26
Ok but its on maximum level and cant stand on this noise.nothing to do?
You can use fan mate and similar:
https://forum-en.msi.com/index.php?topic=144814.msg1078104#msg1078104

Z77A-G45- CPU fan speed problem

Hi all, new to this forum and MSI Motherboards.
i have a problem with my CPU fan speed when i plug any fan and water cooler fan into the CPU 4pin they all run at 2000+ rpm, but when i use the fan 1 or fan 2 --4 pin it runs at a slower speed of 1400rpm, am i missing something in bios, i have 2.5 version of bios, would be greatfull for any help....

Should be able to adjust in the section below or with control center.
Quote
Hardware Monitor
Press <Enter> to enter the sub-menu.
CPU Smart Fan Target
Controls CPU fan speed automatically depending on the current temperature and
to keep it with a specific range. If the current CPU temperature reaches the target
value, the smart fan function will be activated.
SYS Fan1/ Fan2 Control
These items allow users to select how percentage of speed for the SYSFAN1.
CPU/ System Temperature, CPU FAN/ SYS FAN 1/ SYS FAN2 Speed
These items show the current status of all of the monitored hardware devices/ components
such as CPU temperature/ system temperature and the few fans’ speeds.

Msi rx 3870 OC fan speed problem (constant@%24 fanspeed)

hi all. i'm new to this forum and i need help.
i got a problem with my graphic card. when i look my fan speed with gpu-z, it shows my fan speed@%24 constant. and when my card reaches somethink like 65 C my screen becomes blur then my monitor can't detect card and show black screen. i'm newbie so i don't want to do something silly with rivaturner or ati tool. i install last version of ati 9.6 this could be for this or this is a bios bug?!
thanx for feedbacks.
P.S. sorry for my english

Quote
my screen becomes blur then my monitor can't detect card and show black screen.
Where that happend?
What PSU you use? List brand and details, look over PSU sticker.
Quote
and when my card reaches somethink like 65 C my screen
The temp is fine

MSI H81M-P33 Cpu Fan Speed Problem! Urgent

Hi. Bought a H81M-P33 board and got a problem.
I can´t increase my CPU fan Speed to maxium RPM . Tried to use Command Center and Board Bios without any sucess.
This leads to my cpu (i5 4670) getting hot with stock cooler. When I´m encoding a video it reaches 85º. The best solution I had was to connect CPU Fan to Chassis Fan slot on the motherboard and it increased speed, but still it doesn´t increase past a certain value.
What can I do to solve this problem? Tried everything without any luck. The board doesn´t handle CPU fan speed + temperatura increase well. Is not normal to have a CPU stock volts getting hot.
Thanks

I know that for sure XFM. The thing is that the board isn´t increasing CPU fan speed as it should. Ofc a better cooler would do the job, but even with stock cooler it can be cooler. The problem is that the fan is always in slow mode :|

Bad noise/ fan speed problem with Rev B iMac

Like a lot of other people, I'm having problems with ridiculous fan noise. I've read through the forum and tried the following (with no success):
1) Reset SMU (x2)
2) Ran Maintenance Scripts. (x2)
3) Removed the back and blew dust from fans, ports, etc.
The processor is set to automatic. The problem occurs whether or not I have any peripherals plugged in. I get the noise/rpms when all I have running is Safari and XRG.
On certain websites, the CPU fan will climb to 5600, CPU temp to 79C, with CPU usage at 80-90%.
Does this sound like a logic board problem? Something else, possibly?
Basically, I'm trying to cover all of my bases before I get on the phone with AppleCare. I'd like to try to keep that as short as possible. Thanks in advance for any help/comments.
iMac G5 (ALS) 17" 2.0GHz 512MB RAM Superdrive Mac OS X (10.4.8)
iMac G5 (ALS) 17" 2.0GHz 512MB RAM Superdrive Mac OS X (10.4.8)

Just an FYI. During my iMacs motherboard replacements (3) I was never asked for a case number once. I spent hours on the phone with Applecare when in reality I already new I had a hardware problem and if I would have just taken it in it would have been fixed quicker. The third time I took my iMac G5 in for service the local tech told me to call up Applecare (3rd time then call) and ask for a replacement stating that if they need to call me he would explain that I had a lemon. In everyone of the three bad motherboards the fans spun out of control so I have more experience than I would prefer on this subject. They did step up and as you can see in my profile I have a new Intel iMac courtesy of Apple.
Also a utility to measure your fan speeds is here: http://www.gauchosoft.com/Software/X%20Resource%20Graph/

GT60, ReadWriteEverything problem (cannot set fan speed)

Hi there,
I have a MSI GT60 Notebook (i7 3630qm, GTX 675MX) and removed the GTX 675MX from it, so only Intel HD graphics is used.. But now I have a Problem, that the fan goes up to a very high Speed a few minutes after starting the Notebook (in BIOS and Windows as well).. I downloaded ReadWriteEverything and tried to Change the value in the EC Window (row C0, column 0D) but it immediatly Switches back to 66 or 67.. The value switches allways between 66 and 67, which is the fan Speed in percent if I understand correctly..
Is there any fix for this or is there another way modifying the value, except rightclick, "edit" and entering the value..?
Thanks in advance
glockmane

Didn't find this exact option but there was one called "Primary Display" which I changed from "SG" (Switchable Graphics) to "IGFX" and what should I say, it is super-silent now
Thank you very much for your helpful hint

VTDR128 problem: Fan speed

Similar Messages

Maybe you are looking for