Vtext no loger working from mail server.

any [email protected] is no longer working from our nagios server.
Jan 5 06:41:54 postfix/error[10516]: 418881FEF: to=<[email protected]>, relay=none, delay=193616, delays=193616/0.02/0/0.02, dsn=4.4.2, status=deferred (delivery temporarid: lost connection with smtp-sl.vtext.com[69.78.67.53] while receiving the initial server greeting)
Please advise?
-Dion

I never recieve the text messages and they get stuck in my message server queue.
As soon as I try to connect I do not recieve a helo message.
I try to telnet on 25 to your message server
root@# telnet smtp-sl.vtext.com 25
Trying 69.78.67.53...
Connected to smtp-sl.vtext.com.
Escape character is '^]'.
Connection closed by foreign host.
root@#

Similar Messages

More hard bounce for invalid user from mail server

Hi guys,
this is my first post, but i have reade more post in this forum.
my questions is:
i have a domain into my ironport that receive more invalid recipient but the hard bouns are generate from mail server after the incoming mail pass trhough ironport.
I don't have a ldap server
you can help me for find a solution for block the invalid recipients?
this is my idea:
create a new dictionary with into all host of the domain and i apply a policy for control this dictionary.
thi solutio have a problem that i must inser in dictionary every new user create in the mail server.
regards
Michele

This would really be much easier if you had LDAP. If there is any way you could get LDAP to work in your environment, then that would make the IronPort end of things much easier. But if not, then you can do other things.
Using a dictionary as you suggest would work, but it would mean accepting the bad messages and then bouncing them. This is because you can't consult a dictionary during the SMTP conversation. A better solution would be to put the allowable recipients directly into the RAT. That would cause the invalid recipients to be rejected during the SMTP conversation, which will reduce the amount of backscatter you generate.

Log onto incoming mail server (POP3): Your server does not support the connection encryption type you have specified. Try changing the encryption method. Contact your mail server administrator or Internet service provider (ISP) for additional assistance.

Hi All,
This is my first post to ms exchange forum am getting Log onto incoming mail server (POP3): Your server does not support the connection encryption type you have specified. Try changing the encryption method. Contact your mail server administrator
or Internet service provider (ISP) for additional assistance. in my outlook clients, till last Sunday (12.04.15) my exchange was well & good, Monday morning suddenly the problem started like none of our outlook pop3 clients are able to communicate
with exchange (rest IMAP, SMTP & Exchange accounts are working fine). i have tried with all port no but no luck. please help me to get raid of this one.
Exchange 2013 CU6 with server 2012 Std 64Bit
Thanks,
Murali

Dear All,
I have found the solution for above problem, the problem has occur due to PopProxy inactivity
please find relevant exchange management shell commends below.
1. Get-ServerComponentstate -Identity <yourmailserver.com>
Server Component State
yourmailserver.com ServerWideOffline Active
yourmailserver.com HubTransport Active
yourmailserver.com FrontendTransport Active
yourmailserver.com Monitoring Active
yourmailserver.com RecoveryActionsEnabled Active
yourmailserver.com AutoDiscoverProxy Active
yourmailserver.com ActiveSyncProxy Active
yourmailserver.com EcpProxy Active
yourmailserver.com EwsProxy Active
yourmailserver.com ImapProxy Active
yourmailserver.com OabProxy Active
yourmailserver.com OwaProxy Active
yourmailserver.com PopProxy Inactive
yourmailserver.com PushNotificationsProxy Active
yourmailserver.com RpsProxy Active
yourmailserver.com RwsProxy Active
yourmailserver.com RpcProxy Active
yourmailserver.com UMCallRouter Active
yourmailserver.com XropProxy Active
yourmailserver.com HttpProxyAvailabilityGroup Active
yourmailserver.com ForwardSyncDaemon Active
yourmailserver.com ProvisioningRps Active
yourmailserver.com MapiProxy Active
yourmailserver.com EdgeTransport Active
yourmailserver.com HighAvailability Active
yourmailserver.com SharedCache Active
2. Set-ServerComponentState -Identity <yourmailserver.com> -Component PopProxy -Requester HealthAPI
-State Active
3. Get-ServerComponentstate -Identity <yourmailserver.com>
Server Component State
yourmailserver.com ServerWideOffline Active
yourmailserver.com HubTransport Active
yourmailserver.com FrontendTransport Active
yourmailserver.com Monitoring Active
yourmailserver.com RecoveryActionsEnabled Active
yourmailserver.com AutoDiscoverProxy Active
yourmailserver.com ActiveSyncProxy Active
yourmailserver.com EcpProxy Active
yourmailserver.com EwsProxy Active
yourmailserver.com ImapProxy Active
yourmailserver.com OabProxy Active
yourmailserver.com OwaProxy Active
yourmailserver.com PopProxy Active
yourmailserver.com PushNotificationsProxy Active
yourmailserver.com RpsProxy Active
yourmailserver.com RwsProxy Active
yourmailserver.com RpcProxy Active
yourmailserver.com UMCallRouter Active
yourmailserver.com XropProxy Active
yourmailserver.com HttpProxyAvailabilityGroup Active
yourmailserver.com ForwardSyncDaemon Active
yourmailserver.com ProvisioningRps Active
yourmailserver.com MapiProxy Active
yourmailserver.com EdgeTransport Active
yourmailserver.com HighAvailability Active
yourmailserver.com SharedCache Activ
Replace yourmailserver.com with your server host name.
Thanks

MAXDB copy log file from one server to the other server.

Hi All,
I want to copy a log file from one server to the other server , the database is Maxdb and i don't know how to do it. I want to do it through command prompt, (set of commands required) the front end tool which we are using is DBM ( database manager). Please help.
Regards
M.A

Hi,
Basically, the process is of log shipping. Transferring logs from DC to DR system.
For that, you can check HowTo - Standby DB log shipping - MaxDB - SCN Wiki
This is script based. I have not done it but the idea remains the same.
Regards,
Divyanshu

Options of fetching mails from mail server into PI and also from oracle system

hi All,
Pls extend your help in looking out the possiblity of fetching mails from mail server into SAP PI
and also from oracle system into PI ,earliest help would be appreciated.
and also the types of sources for both the scenarios.
Regards
Vidya Sagar Manda

Hi Vidya,
you can use the email adapter to read/pick up email from mail box.
and use JDBC adapter to read data from table of any database. Please refer the links given to your old thread
Fetch Mails From MailServer using PI and integrate the message into BPM
regards,
Harish

OC4J shuts down after I log off from the server !!!?

Hi,
I have a startup batch file to start OC4J on my customer server. Usually I connect to their server from my office via terminal server (and VPN) and run this batch file as a job via scheduled jobs in WINDOWS to start OC4J. My problem is that the OC4J shuts down as soon as I log off from their server. But it stays running if I disconnect from their server.
This problem happing on a new installed server but on the old one I have not this problem. Probably it should be some parameter setting that I missed.
Would appreciate any help on this.

java -jar oc4j.jar
This is the most basic form. But the above must always be part of the command for launching OC4J.Avi, this is so not true.
One can always starts any standalone java problem by specifying the main class, the class whose main method is the entry point:
java -classpath somePath theMainClass (since some historic time that we should not care anymore.). So it is perfectly ok to
start oc4j 9.0.4 by, after changing to the directory where oc4j.jar lives,
java -cp oc4j.jar com.evermind.server.ApplicationServer or start oc4j 10.1.2 by
java -cp oc4j.jar com.evermind.server.OC4JServer or start oc4j 10.1.3 by
java -classpath oc4j.jar oracle.oc4j.loader.boot.BootStrap Here each oc4j.jar must come from an oc4j installation so that other dependent libraries will be found.
What is nice about "java -jar oc4j.jar" is that it can be used to start any version of oc4j.jar. One does not have to specific the main class, which might change over time as shown above. That is the reason why it is overwhelmingly widely seen. Avi, I would agree if you just meant to recommend that "java -jar oc4j.jar" be used instead of the above.

Joining Actuals and Planned Work from Project Server

Hi,
I have an SQL based query which returns Actuals and Planned work from Project Server; however a number of records (generally generic resources based on the ResourceIsGeneric column) are excluded. I believe this is because my Actuals query does not return
generic resources as we are joining both sides of the query on ResourceUID. I have included a snippet below - is there a way to join Actuals and Planned work so I can return all Resource data?
Thanks
SELECT tl.ResourceUID
,tl.ProjectUID
,tl.ResourceName AS [ResourceName]
,CASE
WHEN tl.ProjectName = 'Administrative'
THEN tl.TaskName
ELSE tl.ProjectName
END ProjectName
,ruv.RBS AS [RBS]
,Sum(ta.ActualWorkBillable) ActualWorkBillable
,Sum(ta.ActualWorkNonBillable) ActualWorkNonBillable
,Sum(ta.ActualOvertimeWorkBillable) ActualOvertimeWorkBillable
,Sum(ta.ActualOvertimeWorkNonBillable) ActualOvertimeWorkNonBillable
,CASE
WHEN Sum(ta.ActualOvertimeWorkBillable) > 0
THEN Sum(ta.ActualOvertimeWorkBillable)
END [HOURS]
,DATEPART(year, ta.TimeByDay) AS [Year]
,DATEPART(month, ta.TimeByDay) AS [Month]
,DATENAME(month, DATEADD(month, DATEPART(month, ta.TimeByDay), - 1)) AS [MonthName]
,puv.[Project Status] AS [ProjectStatus]
,ruv.[Primary Role] AS [PrimaryRole]
,ruv.[Resource Department] AS [Department]
,ruv.ResourceIsGeneric
,ruv.[Cost Category] AS [ResourceType]
,puv.[SAP Project Code] AS [SAPProjectCode]
,CASE
WHEN tl.ProjectName <> 'Administrative'
THEN NULL
ELSE tl.TaskName
END TaskName
,puv.[Project Plan Type] AS [ProjectPlanType]
,puv.[GEM Project Manager] AS [GemPM]
,ruv.[Rate Code] AS [RateCode]
,ruv.[Cost Centre] AS [CostCentre]
,ept.EnterpriseProjectTypeName AS [EPT]
,puv.[I DO Phase]
,puv.ProjectOwnerName AS [ProjectOwner]
FROM dbo.MSP_TimesheetActual_OlapView ta
INNER JOIN dbo.MSP_TimesheetLine_UserView tl
ON ta.TimesheetLineUID = tl.TimesheetLineUID
INNER JOIN dbo.MSP_EpmResource_UserView ruv
ON ruv.ResourceUID = tl.ResourceUID
LEFT JOIN dbo.MSP_EpmProject_UserView puv
ON puv.ProjectUID = tl.ProjectUID
LEFT JOIN dbo.MSP_EpmEnterpriseProjectType ept
ON ept.EnterpriseProjectTypeUID = puv.EnterpriseProjectTypeUID
WHERE ta.TimeByDay >= @xDate1
AND ta.TimeByDay < @xDate2
AND tl.TimesheetStatus IN (
SELECT ParamValues
FROM @ParamTable
AND ta.ActualWorkBillable > 0
GROUP BY ...
) TimesheetActual
FULL JOIN (
SELECT ruv.ResourceUID
,puv.ProjectUID
,ruv.ResourceName
,puv.projectname AS ProjectName
,ruv.RBS AS [RBS]
,Sum(abduv.AssignmentWork) AS [PlannedWork]
,DATEPART(year, abduv.TimeByDay) AS [Year]
,DATEPART(month, abduv.TimeByDay) AS [Month]
,DATENAME(month, DATEADD(month, DATEPART(month, abduv.TimeByDay), - 1)) AS [MonthName]
,ruv.ResourceIsGeneric
,puv.[Project Status] AS [ProjectStatus]
FROM dbo.MSP_EpmResource_UserView ruv
INNER JOIN dbo.MSP_EpmAssignment_UserView auv
INNER JOIN dbo.MSP_EpmAssignmentByDay_UserView abduv
ON auv.AssignmentUID = abduv.AssignmentUID
AND auv.ProjectUID = abduv.ProjectUID
ON ruv.ResourceUID = auv.ResourceUID INNER JOIN dbo.MSP_EpmProject_UserView puv
ON auv.ProjectUID = puv.ProjectUID
AND abduv.ProjectUID = puv.ProjectUID INNER JOIN dbo.MSP_TimeByDay_OlapView tbdov
ON abduv.TimeByDay = tbdov.TimeByDay WHERE abduv.TimeByDay >= @xDate1
AND abduv.TimeByDay < @xDate2
AND ruv.ResourceName <> 'Unassigned Resource'
AND ruv.ResourceName IS NOT NULL
AND abduv.AssignmentWork > 0
GROUP BY ruv.ResourceUID
,puv.ProjectUID
,ruv.ResourceName
,puv.projectname
,ruv.RBS
,DATEPART(year, abduv.TimeByDay)
,DATEPART(month, abduv.TimeByDay)
,ruv.ResourceIsGeneric
,puv.[Project Status]
) TimesheetPlanned
ON TimesheetActual.ResourceUID = TimesheetPlanned.ResourceUID
AND TimesheetActual.[Year] = TimesheetPlanned.[Year]
AND TimesheetActual.[MonthName] = TimesheetPlanned.[MonthName]

Hi,
you pasted just part of your query, e.g. is declaration of @ParamTable missing. Without complete query, it is difficult to see, what you are trying to do.
Could you please provide complete query?
Barbara
To increase the value of this forum, please mark the replies that helped to solve your issue as answer. If you find answers to questions from other forum participants to be helpful, please mark them as helpful. Your participation will help others to find
an appropriate solution faster. Thanks for your support!

Password Prompt from Mail Server

I keep getting prompted by my mail server:
The POP server “mail.username.com” rejected the password for user “[email protected]”
Yet the correct password does not work. This is an on and off problem, 2 hours here then OK, one day there then OK! The problem in spite of endless live chats with my host provider, I thought it was a host server issue, however I have just changed host, and still the problem continues!!
On Mac support the only case similar is an Apple share topic, and it suggests emtpying the casche on the server side!!
Anyone??
Simon

Open /Applications/Utilities/Keychain Access, choose Keychain First Aid from the application menu, and proceed to repair the keychain. If that doesn’t work, you may try removing the password entry from the keychain and letting Mail create it again the next time it asks for it.
Note, however, that Mail often doesn’t correctly report what the problem really is. If Mail can connect to the server but cannot log into your mail account for some reason, it’ll ask for your password regardless of whether that’s really the problem or not. Don’t keep entering the password every time — just click Cancel instead, and take the account back online afterwards.
Some ISPs refuse connection attempts if they are too frequent, for example, or limit the number of simultaneous connections that are allowed from the same IP address, or there may be too many messages on the server and Mail times out before the server responds, or there might be a problem with the network, or there might be a problem with the server...
Do you access this account from more than one computer or some other way (e.g. webmail) while Mail is checking for mail?
What’s the time interval chosen in Mail > Preferences > General > Check for New Mail? If it’s set to Every minute, try changing it to Every 5 minutes.
If this is a POP account, what are your Preferences > Accounts > Remove copy from server settings?
Go to Apple Menu > System Preferences > Network, choose Network Port Configurations from the Show popup menu, and make sure that the configuration used to connect to Internet appears at the top of the list. Leave checked (enabled) only the port configuration needed to connect to Internet and Built-in Ethernet (in that order if not the same), uncheck (disable) the rest of network port configurations and see whether that helps — if it doesn’t, turn ON again the ones you want enabled.
Try using a different method to connect to Internet, if possible, or connecting the computer to Internet as directly as possible (i.e. bypassing any routers that might be present, using an ethernet cable instead of wireless, etc.), or shutting down both the computer and the router/modem used to connect to Internet, restarting, and see whether that makes a difference.

IPad Pop3 email deleting from mail server even though set to NEVER

Hello.
We are experiencing a most strange behaviour with our e-mail. We use a web host and access e-mail through POP3.
Two of our users are experiencing similar problems, and this is how their lives are setup:
1) Outlook 2010, set to remove e-mail from server once downloaded, however, we are manually polling to receive e-mails at will, rather than periodically.
2) iPad 2 3G - Set to delete e-mails from server "never".
3) iPhone 5 (ios 6) - Set to delete e-mails from server "never".
One of the users is receiving e-mails to their iPad, but not to either of the other two devices, sometimes to the two i-devices but not t Outlook, and sometimes to all three. Occasionally, they are not receiving e-mails at all.
I have talked to our web host, and in all instances and testing we have done with them, they can see e-mails received, and deleted from the server. However, their logs cannot tell us anymore than that.
Here's the scenario:
1) Send an e-mail. Check the web host e-mail interface and can see the e-mail has arrived in the user's inbox.
2) Open e-mail on iPad. Receive e-mail. Refresh webmail to see if e-mail is still present, and it is.
3) Hit send/receive in Outlook 2010. E-mail not received in Outlook 2010. Refresh webmail to see if e-mail is still present. It is not.
So from all indications, it looks like doing a send/receive in Outlook is deleting the message from the server, but it is not being received in outlook. I should note here that we have done extensive searches to check if the e-mail was received into some other folder, and have setup a search folder of all e-mails received today, just to make sure we weren't missing anything. The e-mails are indeed never reaching Outlook.
If we hit send/receive in Outlook 2010 after we receive the e-mail on the iPad AND HAVE CLOSED THE E-MAIL APP on the IPAD, then we DO receive the e-mail into Outlook 2010, and it disappears from the server.
This would leave me to guess that POP3 is trying to latch on to the e-mail on the server from both the iPad and Outlook 2010 at the same time and is failing, but Outlook is deleting the message from the server before it can actually download it because iPad has POP3 locked.
Anyone have any experience with this? Any way to stop it from happening?

Was this ever resolved?

When i configure mail account using POP3, i am not getting any sync option to sync from mail server, Any solution ? don't ask me to configure using IMAP

And in IMAP mail server ctrl+shift+M (to copy same mail to target folder ) shortcut is also not working.

POP account do not sync. They are one way communication from the server. There is no need for s sync option with POP.

Sbcglobal(yahoo) and POP3/IMAP Settings to Keep/Remove From Mail Server

First iPhone and I've researched and can't seem to find a clear answer to probably a simple question.
I have set up two email accounts (one work/one personal) on the iPhone. I'm not clearly understanding the Advanced Mail Server Settings on Removing Deleted Messages. The options listed are "Never", "After One Day", "After One Week", "After One Month".
First, if I select one of these options and then later download the mail to my laptop, how does that affect what's been download to the iPhone? Will it sync again with what's on the mail server? Which, after downloading to the laptop, would be nothing and remove what's in my iPhone inbox? (No Exchange Servers in use unfortunately.)
And, this same question would apply to any I've deleted from the iPhone. Would the iPhone then sync again with the mail server and remove the deleted message from there -- so it would not be downloaded to the laptop?
I hope I've made sense. Any extra explanation on how these settings work would be sincerely appreciated.

That's not how IMAP works. If you want to keep the inbox clean, but not delete the messages, create folders and move the messages into them for later review.

[ACS 5.4] Logs access from secondary server

Hi,
I have 2 ACS 5.4 in distributed environment. Everything left to defaults besides policy.
Let assume ACS-A is the primary and ACS-B is the secondary. Regularly, I'd connect to ACS-A to make changes and WATCH LOGs.
Now, let assume ACS-A is down. Obviously, I connect to ACS-B and everything works fine, besides logs. When I click on 'logs center', a blank window opens and nothing happens.
But the URL it tries to open, it's ACS-A.
Now, from what I saw, ACS-A being the primary box is the log collector for a distributed environment, by default. But how I supposed to watch the logs on a secondary server when primary is down?
Thank you.

Hello Alex,
The following are the supported browsers and it should work fine in all fo them. Please have a look at them:-
Supported Web Client and Browsers
You can access the ACS 5.4 administrative user interface using the following web clients and browsers:
•MAC Platform
–Mozilla Firefox version 3.x
–Mozilla Firefox version 10.x
•Windows 7 32-bit
•Windows 7 64-bit
•Windows XP Professional (Service Pack 2 and 3)
–Internet Explorer version 7.x
–Internet Explorer version 8.x
–Internet Explorer version 9.x
–Mozilla Firefox version 3.x
–Mozilla Firefox version 8.x
–Mozilla Firefox version 9.x
–Mozilla Firefox version 10.x
The above mentioned browsers are supported only with one of the following cipher suits:
–-TLS_RSA_WITH_AES_256_CBC_SHA
–-TLS_RSA_WITH_AES_128_CBC_SHA
–-RSA_WITH_3DES_EDE_CBC_SHA

I am trying to create another email account with talk talk. and I keep getting a failed message saying 'mail could not log into the mail server talk talk. Yet I already have another email account with talk talk. Not sure what I am doing wrong

I am trying to create another email account with Talktalk. I already have one account.
I try to input the new email address and password and get a failed message
'Mail could not lot into the mail server talktalk.net.
I have tried several times and keep getting the same message.
Any ideas

Accessing your emails from any computer connected to the Internet or from a Smart phone should be straightforward.
For help on how to set up your e-mail on some of the most common software applications and devices, see How do I set up my TalkTalk email?
If your software application or device isn't listed, all you need to connect to your TalkTalk e-mail mailbox are the TalkTalk e-mail settings. Make sure you use the right email settings for your specific email address.
TalkTalk email addresses only
Login / Username
[email protected]
[email protected]
Incoming mail server
mail.talktalk.net
mail.talktalk.net
Incoming Port
110
143
Outgoing mail server
smtp.talktalk.net
smtp.talktalk.net
Outgoing Port
587
587
Outgoing SSL
Yes
Yes
Outgoing Authentication
Yes
Yes

Snow Leopard Server Mail - need attachments from mail server no longer on line.

Switched to GMail
pulled in .pst file for outlook but it had been configured to leave attachments on server.
the mail server is no longer online - how do I get the attachments?
I have access to the server but do not want to risk the mail syncing with google and deleting the files on the old mail server.
The export was not done cleanly - now I have to go back to pull from server.
Is there a way to export a users mail with attachments from the server to a folder that can then be imported into regular mail program?
To make it more fun the person is on a windows XP using outlook - so I will need to get it from the closed server to his outlook.

Enable Finder to Show Invisible Files and Folders
Open the Terminal application in your Utilities folder. At the prompt enter or paste the following command line then press RETURN.
defaults write com.apple.finder AppleShowAllFiles TRUE
killall Finder
To turn off the display of invisible files and folders enter or paste the following command line and press RETURN.
defaults write com.apple.finder AppleShowAllFiles FALSE
killall Finder
Alternatively you can use one of the numerous third-party utilities such as TinkerTool or ShowHideInvisibleFiles - VersionTracker or MacUpdate.

SCOT - How to send a mail from mail server to a SAP system

Dear SAP colleagues,
With SCOT you can configure the SAPConnect administration.
You can easily configure your SAP system to allow the send of email from SAP to your mail server.
Exemple :
1. SID SAP : DL1
2. Mail server : sn1exch.lec.local
3. Target email : "myeamailaddress"
Send email process 01 : 1. DL1 ==> 2. Mail Server ==> 3. You read your email in your inbox "myeamailaddress"
My problem :
From my inbox "myeamailaddress", I want to be able to send email to SAP (Dl1).
Send email process 02 : 1. My inbox "myeamailaddress" ==> 2. Mail Server ==> 3. SAP (DL1).
Question :
Do you have any help to configure it ?
Thanks in advance for your input.
Best regards
NetWeavAdmin

Dear Olivier,
I do not have a specifi technical problem.
Let's summarize - my request concerns a SRM Workflow :
I am ordering an article. When the order is higher than 2'000 USD, I need to get the approval of my manager.
That's the workflow.
Workflow :
1. I am user in DL1 SAP System.
    UserName : CharlesN
    In SU01,
    charles(a)green.com
2. From DL1 SAP system, I order articles. The order total amount is higher than 2'000 USD.
    In the workflow, an mail from DL1 is automatically send to my manager in his MS-Outook inbox.
    (manager(a)green.com)
3. My manager reads the mail I have sent him and give his approvals by clicking on a approvals button.
    When clicking the button, an mail must be automatically send from my manager MS-Outlook inbox
    to DL1 to CharlesN inbox in SBWP in DL1 SAP system.
I have configured SCOT and read OSS Note 455140.
The SAPconnect virtual host is activated in DL1 (SICF).
I think a miss a step in our mail server to relay a mail from MS-Outlook to my SAP system.
Any suggestion is welcome.
Best regards

Vtext no loger working from mail server.

Similar Messages

Maybe you are looking for