VTO-2014 Error - Informative

After Installing an Oracle 9i database and its patches then installing a 9i and 10g client dicovered problems running enterprise manager.
When I used the feature Show DDL and Create Like for certain objects I would receive the following erros
VTO-2014 Server Object Could Not be Instantiated
VBO-1508 An Error has Occurred and teh server object could not be initialized
ORA-29902 Error in Executing <routine name> routine
ORA-00600 Internal Error Code ...
The solution for me was found on metalink for those who like me are not blessed with access to metalink here is teh solution to my issue.
When the patch sets where installed the script catpatch.sql was not executed.
Once this script was executed my problem went away.
Just an FYI

Hey naifmoajib,
Thanks for the question. The following resource outlines troubleshooting steps for these three error codes:
iOS: Restore errors 4005, 4013, and 4014
http://support.apple.com/kb/TS5314
Thanks,
Matt M.

Similar Messages

Error VTO-2014

I am trying to launch the Backup tool using the Backup Management menu option in Enterprise manager and get this error.
VTO-2014: Server object could not be instantiated. Please disconnect and try again.
This started happening after I uninstalled and reinstalled Oracle (on a Win2K server.)
I searched all over Oracle for help on this error message and there were no hits, not even in the documentation.
Any ideas?

Hi,
Im new too. I've had some similar problems. You need to make sure you are logged on to the OEM In Oracle Management Server. You must first configure this set by going into Programs/oracle/configuration and migration tools/ and then clicking on the Enterprise Configuration Assistant. Once you have followed that wizard you'll have to start the service on your server. go to Admin tools/services/ and look for a service that looks similar to oracleorahomemanagmentserver. Once you start the service you'll be able to get into your OEM. You'll login as SYSMAN with the default pasword listed in the help file on the login screen. You can then go in to the CONFIGURATION menue and confiugre Admins to change the password from the default and to add an admin of your own. I also have found that by setting the service previously mentioned to automatic you forgo some of the head ache of having to remember how to go about turning it back on again.
Hope this helps
Sam Beasley

Illustrator CC 2014 error message definition

When attempting to save an .eps file in IllustratorCC 204, I get an error message "can't save error ID:-50". Can you tell mw what it means and how I can rectify it?

I think TrueType. MyriadPro.
I have never had this problem with the previous version.
The problem is only in Illustrator.
Op 29-jan.-2015, om 16:13 heeft Monika Gause het volgende geschreven:
Illustrator CC 2014 error message definition
created by Monika Gause in Illustrator - View the full discussion
Which font is it, kaartlook? What kinf of font - TrueType, OpenType, PostScript?
Did you check the font?
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7143738#7143738 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7143738#7143738
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Illustrator by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Unknown SQL Exception 208 occurred. Additional error information from SQL Server is included below.Invalid object name 'Webs'.

SP 2013 Server + Dec 2013 CU. Upgrading from SharePoint 2010.
We have a web application that is distributed over 7-8 content databases from SharePoint 2010. All but one database are upgradable. However, one database gives:
Invalid object name 'Webs'.
while running Test-SPContentDatabase or Mount-SPContentDatabase.
EventViewer has the following reporting 5586 event Id:
Unknown SQL Exception 208 occurred. Additional error information from SQL Server is included below.Invalid object name 'Webs'.
After searching a bit, these links do not help:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/fd020a41-51e6-4a89-9d16-38bff9201241/invalid-object-name-webs?forum=sharepointadmin
we are trying PowerShell only.
http://blog.thefullcircle.com/2013/06/mount-spcontentdatabase-and-test-spcontentdatabase-fail-with-either-invalid-object-name-sites-or-webs/
In our case, these are content databases. This is validated from Central Admin.
http://sharepointjotter.blogspot.com/2012/08/sharepoint-2010-exception-invalid.html
Our's is SharePoint 2013
http://zimmergren.net/technical/findbestcontentdatabaseforsitecreation-problem-after-upgrading-to-sharepoint-2013-solution
Does not seem like the same exact problem.
Any additional input?
Thanks, Soumya | MCITP, SharePoint 2010

Hi,
“All but one database are upgradable. However, one database gives:
Invalid object name 'Webs'.”
Did the sentence you mean only one database not upgrade to SharePoint 2013 and given the error?
One or more of the following might be the cause:
Insufficient SQL Server database permissions
SQL Server database is full
Incorrect MDAC version
SQL Server database not found
Incorrect version of SQL Server
SQL Server collation is not supported
Database is read-only
To resolve the issue, you can refer to the following article which contains the causes and resolutions.
http://technet.microsoft.com/en-us/library/ee513056(v=office.14).aspx
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

Solaris Studio 12.3 demangle fatal internal error: information lost in character quoting

Hello,
I have run into a problem with the Solaris Studio 12.3 compiler when building one source file that makes use of the open source Eigen library. The compilation fails with the error:
demangle fatal internal error: information lost in character quoting
CC: fbe failed for CSeasonalComponent.cc
The full command that fails is:
CC -c -o .objs/CSeasonalComponent.o -m64 -g3 -fsimple=1 -O4 -xbuiltin=%all -xlibmil -xlibmopt -xarch=sse3 -xchip=nehalem -nofstore -xalias_level=compatible -features=extensions -errtags +w -erroff=anonnotype,anonstruct,badargtype2w,hidef,notemsource,wbadasg -library=Crun -library=no%Cstd -KPIC -mt -I/usr/local/stdcxx/include -I/usr/include -I/usr/local/include -DSOLARIS -D_POSIX_PTHREAD_SEMANTICS -D_RWSTD_NO_STRING_MUTEX -D_RWSTD_MINIMUM_STRING_CAPACITY=22 -D_RWSTD_NO_LIST_NODE_BUFFER -DBOOST_MATH_NO_LONG_DOUBLE_MATH_FUNCTIONS -DEIGEN_MPL2_ONLY -DEIGEN_DONT_USE_RESTRICT_KEYWORD -DNDEBUG -I/export/home/dave/source/local/include -I/usr/local/include/boost-1_54 CSeasonalComponent.cc
The problem goes away if the -g3 flag is removed. Replacing -g3 with -g0 does not help - the same fatal error occurs. (Removing the -g0/-g3 options has the effect of not passing a -dbgfile option to the fbe program, and this appears to be what avoids the problem.)
The information in this question is from a Solaris x86 machine, although the same "demangle fatal internal error: information lost in character quoting" also occurs on SPARC with the same source file and similar (although obviously not identical) compiler options.
The result of running the CC command that fails with the -dryrun option added is this:
### CC: Note: NLSPATH = /opt/solarisstudio12.3/prod/bin/../lib/locale/%L/LC_MESSAGES/%N.cat:/opt/solarisstudio12.3/prod/bin/../../lib/locale/%L/LC_MESSAGES/%N.cat
###     command line files and options (expanded):
### -dryrun -c -o.objs/CSeasonalComponent.o -m64 -g3 -fsimple=1 -O4 -xbuiltin=%all -xlibmil -xlibmopt -xarch=sse3 -xchip=nehalem -nofstore -xalias_level=compatible -features=extensions -errtags=yes +w -erroff=anonnotype,anonstruct,badargtype2w,hidef,notemsource,wbadasg -library=Crun -xcode=pic32 -mt=yes -I/usr/local/stdcxx/include -I/usr/include -I/usr/local/include -DSOLARIS -D_POSIX_PTHREAD_SEMANTICS -D_RWSTD_NO_STRING_MUTEX -D_RWSTD_MINIMUM_STRING_CAPACITY=22 -D_RWSTD_NO_LIST_NODE_BUFFER -DBOOST_MATH_NO_LONG_DOUBLE_MATH_FUNCTIONS -DEIGEN_MPL2_ONLY -DEIGEN_DONT_USE_RESTRICT_KEYWORD -DNDEBUG -I/export/home/dave/source/local/include -I/usr/local/include/boost-1_54 CSeasonalComponent.cc
/opt/solarisstudio12.3/prod/bin/ccfe -xarch=amd64 -D__SunOS_5_10 -D__SUNPRO_CC=0x5120 -D__unix -D__SVR4 -D__sun -D__SunOS -D__x86_64 -D__x86_64__ -D__amd64 -D__amd64__ -D_LP64 -D__LP64__ -D__BUILTIN_VA_STRUCT -Dunix -Dsun -D_REENTRANT -D__SUN_PREFETCH -D__SUNPRO_CC_COMPAT=5 -I/usr/local/stdcxx/include -I/usr/include -I/usr/local/include -I/export/home/dave/source/local/include -I/usr/local/include/boost-1_54 -I-xbuiltin -I/opt/solarisstudio12.3/prod/include/CC -I/opt/solarisstudio12.3/prod/include/cc -DSOLARIS -D_POSIX_PTHREAD_SEMANTICS -D_RWSTD_NO_STRING_MUTEX -D_RWSTD_MINIMUM_STRING_CAPACITY=22 -D_RWSTD_NO_LIST_NODE_BUFFER -DBOOST_MATH_NO_LONG_DOUBLE_MATH_FUNCTIONS -DEIGEN_MPL2_ONLY -DEIGEN_DONT_USE_RESTRICT_KEYWORD -DNDEBUG -ptf /tmp/ccfe.04.%1.%2 -features=extensions -ptx /opt/solarisstudio12.3/prod/bin/CC -ptk "-dryrun -c -m64 -g3 -fsimple=1 -O4 -xbuiltin=%all -xlibmil -xlibmopt -xarch=sse3 -xchip=nehalem -nofstore -xalias_level=compatible -features=extensions -errtags=yes +w -erroff=anonnotype,anonstruct,badargtype2w,hidef,notemsource,wbadasg -library=Crun -library=no%Cstd -xcode=pic32 -mt=yes -I/usr/local/stdcxx/include -I/usr/include -I/usr/local/include -DSOLARIS -D_POSIX_PTHREAD_SEMANTICS -D_RWSTD_NO_STRING_MUTEX -D_RWSTD_MINIMUM_STRING_CAPACITY='22' -D_RWSTD_NO_LIST_NODE_BUFFER -DBOOST_MATH_NO_LONG_DOUBLE_MATH_FUNCTIONS -DEIGEN_MPL2_ONLY -DEIGEN_DONT_USE_RESTRICT_KEYWORD -DNDEBUG -I/export/home/dave/source/local/include -I/usr/local/include/boost-1_54 " -compat=5 -g -xdebuginfo=macro -xdbggen=no%stabs+dwarf2+usedonly -xF=%none -xbuiltin=%all -pic -xldscope=global -xivdep=loop -xalias_level=layout -xdepend -O4 -errtags -erroff=anonnotype,anonstruct,badargtype2w,hidef,notemsource,wbadasg +w CSeasonalComponent.cc -ptb .objs/CSeasonalComponent.o -o /tmp/ccfe.01.ir -s /tmp/ccfe.02.sd 2> /tmp/ccfe.03.err
/opt/solarisstudio12.3/prod/bin/iropt -Qy -O4 -xarch=sse3 -m64 -xchip=nehalem -xcache=generic -fsimple=1 -g -depend -mt -k -xalias_level=layout -xbuiltin=%all -xlibmopt -xprefetch=auto,explicit -xprefetch_level=1 -xprefetch_auto_type=no%indirect_array_access -xvector=no%lib,simd -F -o /tmp/iropt.05.ir -is /tmp/ccfe.02.sd /tmp/ccfe.01.ir 2> /tmp/iropt.06.err
rm /tmp/ccfe.01.ir
/opt/solarisstudio12.3/prod/bin/c++filt -filt=no%stdlib < /tmp/iropt.06.err >> /tmp/ccfe.03.err
rm /tmp/iropt.06.err
/opt/solarisstudio12.3/prod/bin/stdlibfilt -stderr < /tmp/ccfe.03.err
rm /tmp/ccfe.03.err
/opt/solarisstudio12.3/prod/bin/ir2hf -Qy -g -O4 -xbuiltin=%all -m64 /tmp/iropt.05.ir /tmp/ccfe.02.sd /tmp/ir2hf.07.hf
rm /tmp/ccfe.02.sd
rm /tmp/iropt.05.ir
/opt/solarisstudio12.3/prod/bin/ube -Qy -verbose -iropt -O4 -comdat -m64 -xarch=sse3 -xchip=nehalem -xcache=generic -xannotate=yes -il /opt/solarisstudio12.3/prod/lib/amd64/libm.il -fsimple=1 -ZW -g -xalias_level=layout -PIC -xbuiltin=%all -N -xprefetch=auto,explicit -xprefetch_level=1 -xthreadvar=dynamic -mt -fbe /opt/solarisstudio12.3/prod/bin/fbe -ipo .objs/CSeasonalComponent.o -dbgfile /tmp/ube.09.dbg -S /tmp/ube.08.s /tmp/ir2hf.07.hf
rm /tmp/ir2hf.07.hf
/opt/solarisstudio12.3/prod/bin/fbe -Qy -xarch=amd64 -xchip=nehalem -warn=%none -o .objs/CSeasonalComponent.o /tmp/ube.08.s -dbgfile /tmp/ube.09.dbg
rm /tmp/ube.08.s
rm /tmp/ube.09.dbg
Running the CC command with the -keeptmp option added leaves these files in /tmp:
-rw-rw-r--   1 dave     dev            0 Dec 11 16:20 /tmp/ccfe.1386778859.8273.03.err
-rw-rw-r--   1 dave     dev      45679331 Dec 11 16:21 /tmp/ccfe.1386778859.8273.01.ir
-rw-rw-r--   1 dave     dev            0 Dec 11 16:21 /tmp/iropt.1386778859.8273.06.err
-rw-rw-r--   1 dave     dev       393220 Dec 11 16:21 /tmp/ccfe.1386778859.8273.02.sd
-rw-rw-r--   1 dave     dev      47820727 Dec 11 16:21 /tmp/iropt.1386778859.8273.05.ir
-rw-rw-r--   1 dave     dev      60490992 Dec 11 16:21 /tmp/ir2hf.1386778859.8273.07.hf
-rw-rw-r--   1 dave     dev      22377791 Dec 11 16:21 /tmp/ube.1386778859.8273.09.dbg
-rw-rw-r--   1 dave     dev      8915850 Dec 11 16:21 /tmp/ube.1386778859.8273.08.s
Finally, creating an fbe command similar to the one from the dry run output using the last two files in /tmp with the -V option added as follows:
/opt/solarisstudio12.3/prod/bin/fbe -V -Qy -xarch=amd64 -xchip=nehalem -warn=%none -o .objs/CSeasonalComponent.o /tmp/ube.1386778859.8273.08.s -dbgfile /tmp/ube.1386778859.8273.09.dbg
results in this:
as: Sun Compiler Common 12.3 SunOS_i386 2011/11/16
demangle fatal internal error: information lost in character quoting
I would be happy to provide the /tmp/ube.1386778859.8273.08.s and /tmp/ube.1386778859.8273.09.dbg files to assist with reproduction of this problem if anyone is interested.

The problem with creating a simple test case that doesn't rely on Boost or Eigen is that the error message is so vague that there's no hint about where to start. The pre-processed source of the file that causes the problem is 4.7MB so trying to chop that down without any clue as to what's relevant is going to be very hard.
You could do everyone a favour if future internal error messages contained at least some information about what caused the problem. I know they're not supposed to happen at all, but clearly they occasionally do. For example, instead of:
demangle fatal internal error: information lost in character quoting
something like:
demangle fatal internal error: information lost in character quoting: corrupt symbol is __1cFEigenPPlainObjectBase4n0AGMatrix4CdIBiBiAIBiB___KresizeLike4n0AOGeneralProduct4n0AFBlock4Ckn0AGMatrix4CdIBIB_"""_oops
Then that would give somebody trying to report the problem or change their code to avoid it a starting point for where to look.
Anyway, I've worked around the problem by changing -g3 in the CXXFLAGS in the Makefile to `test $< = CSeasonalComponent.cc || echo -g3` which avoids the error. And hopefully like you say it's a known problem that's already fixed in the next version of Solaris Studio.

SQL database login for 'SharePoint_Config_2010' on instance 'DB server' failed. Additional error information from SQL Server is included below.

we formatted Database server and restored all the databases from the backup. but the sharepoint site is giving below error when i access the home page.
we have 3 application servers in that two are working fine, but only one server getting the below error.
SQL database login for 'SharePoint_Config_2010' on instance 'db server' failed. Additional error information from SQL Server is included below.
Login failed for user 'domain\user'.
could you help what is the issue?

Hi,
According to your post, my understanding is that you failed to access sharepoint site with one application server.
It was due to the MOM/SCOM Agent that has a SharePoint management pack installed, the agents Windows Service runs as ‘Local System’ and thus causes this.
The workaround is to either kill the SCOM agent service, or set it to run as a dedicated service account.
In addtion, I recommend to add the logon account of the SharePoint Timer service as a user of the SharePoint_Config database. Give role membership to the account db_owner.
You also need to add the SharePoint accounts back into sql server.
There are some similar articles for you to take a look at:
http://blog.blksthl.com/2012/04/26/login-for-sharepoint_config-login-failed-for-user-domaincomputername-scom-agent/
http://msdn.microsoft.com/en-us/library/jj551781(v=nav.70).aspx
http://sharepoint.stackexchange.com/questions/51623/moved-sql-databases-for-sharepoint-2010-and-now-have-a-3351-error
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Event 3351, SQL database login for 'DB_Config' on instance failed. Additional error information from SQL server is mentioned below. Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'.

category-database
event id-3351
source-sharepoint foundation
SQL database login for 'DB_Config' on instance 'DB\instance' failed. Additional error information from SQL Server is included below:
Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'.
I have been getting this error every hour on only 1 application server of the 2.
My farm consists of 2 app servers, 2 wfes & 2 sql nodes.
My public site is working fine. Authentication is NTLM.
SharePoint VSS Writer is disabled.None of my appPool accounts are running under local system.
I have read many forums/blogs, but couldnt find a solution for this.
Any help would be appreciated!

Hi,
As I understand, you found event id 3351 in event log. Please collect more information as below：
Check if the error also occurs on other servers in your farm.
Check if backup job is scheduled at the time when the event id occurs.
Please run Config Wizard or psconfig.exe -cmd secureresources on all servers and test the issue again.
Regards,
Rebecca Tu
TechNet Community Support

Unknown SQL Exception 0 occurred. Additional error information from SQL Server is included below.

Log Name:      Application
Source:        Microsoft-SharePoint Products-SharePoint Foundation
Event ID:      5586
Task Category: Database
Level:         Error
Keywords:
User:          DOMAIN\SA account
Unknown SQL Exception 0 occurred. Additional error information from SQL Server is included below.
The target principal name is incorrect. Cannot generate SSPI context.
This is the error, if often find in my WFE's. I googled for the error and granted DB owner roles for the service account as specified in TechNet, but no luck.
Even same error logs generated on SharePoint logs.
SqlError: 'The target principal name is incorrect. Cannot generate SSPI context.'
Source: '.Net SqlClient Data Provider' Number: 0 State: 0 Class: 11 Procedure: 'GenClientContext' LineNumber: 0 Server: 'servername\SHAREPOINT,4101'
f2cbcc9c-ac65-7084-fcab-4d2943cdfdea
Unknown SQL Exception 0 occurred. Additional error information from SQL Server is included below.
The target principal name is incorrect. Cannot generate SSPI context.
f2cbcc9c-ac65-7084-fcab-4d2943cdfdea
System.Data.SqlClient.SqlException (0x80131904): The target principal name is incorrect.
Cannot generate SSPI context.     at System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, UInt32 waitForMultipleObjectsTimeout, Boolean allowCreate, Boolean onlyOneCheckConnection, DbConnectionOptions
userOptions, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnecti...
f2cbcc9c-ac65-7084-fcab-4d2943cdfdea
Thanks.
Badri

For SharePoint to recognize the SQL server name we provide its name and instance while installing SharePoint. When we are using SQL alias to connect to SQL, we need to configure the same alias on SharePoint server so that SharePoint recognize alias over
the network.
Having SharePoint connect to a SQL Alias instead of the NetBIOS name is always a good idea. The main benefit is, if you ever have to switch the SQL Server or connect to a SQL Cluster VIP address, you just change the Alias to point to the SQL Cluster name
on the SharePoint Server and restart the SharePoint Timer Service and you are good to go.
Please check this blog.
http://blogs.msdn.com/b/priyo/archive/2013/09/13/sql-alias-for-sharepoint.aspx
http://technet.microsoft.com/en-us/library/hh292622(v=office.15).aspx
Thank You, Pallav S. Srivastav ----- If this helped you resolve your issue, please mark it Answered.

Indesign 2014 error msg

How can I resolve Indesign 2014 error msg: cannot convert to color space, no source or destination path?

The color tab is blank and the swatches palette only has the basic rgb colors (no other swatches). I see the error message when I try to load rgb or cmyk into the color tab. Interestingly: the Indesign cc 2013 (still installed on my computer) has access to all the color swatches and palettes. Is there a way to establish the correct color path/destination for Indesign 2014? My OS is Windows 7.

Sending Error information

hi All,
We have in our implementation XI->TIBCO systems interaction. For the simplification of monitoring we are thinking of capturing the error information that was sent back to us (which we can view in the SXMB_MONI) and send it to TIBCO. Is there any way we can send this error information of any interface to TIBCO.
Thanks,
Karthik

Here's a bunch of links about CCMS, there should also be something leading to autoreaction methods.
/people/sap.user72/blog/2005/03/03/alert-management--use-it-in-ccms-to-shorten-response-times-for-business-critical-situaltions
https://websmp205.sap-ag.de/monitoring
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/1f238124-0901-0010-6c9b-de7ce378f155 [original link is broken]
/people/sap.india5/blog/2005/12/06/xi-ccms-alert-monitoring-overview-and-features
http://help.sap.com/saphelp_nw2004s/helpdata/en/90/4e313f8815d036e10000000a114084/frameset.htm
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i
/people/sap.user72/blog/2005/12/05/xi-grmg-customizing-for-xi-ccms-heartbeat-monitoring-part-ii
/people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1
/people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2
/people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3
/people/dieter.krieger/blog/2006/08/04/sap-monitor-templates-for-sap-netweaver-and-key-components-of-sap-solutions
/people/sap.user72/blog/2004/10/27/bspabap-howto-read-mte-class-values
/people/federico.babelis2/blog/2006/04/26/ccms-rule-based-monitors-configuration-guide-for-dummies

Feed Custom error information to CCMS MTEs

Dear All,
we would like to leverage standard CCMS alerting functionality out of a custom program. The background is a custom interfacing program that monitors certain batch jobs that are interface related. In case a batch job fails we would like to feed the error information to CCMS to a standard (preferable) or custom MTE. We do not aim to use standard CCMS job monitoring given that our custom program contains more detailed error information that we would like to make available to CCMS in case a particular batch job fails. Can someone provide guidance on how to develop such a solution and what steps are involved. We imagine that there are SAP standard procedures (e.g. function modules or BAPI, etc) that allow for error information to be feed to CCMS MTEs and trigger alerts. We have done some investigation but could not find the right answer. Any help is much appreciated.
Cheers Stefan

Dear All,
we would like to leverage standard CCMS alerting functionality out of a custom program. The background is a custom interfacing program that monitors certain batch jobs that are interface related. In case a batch job fails we would like to feed the error information to CCMS to a standard (preferable) or custom MTE. We do not aim to use standard CCMS job monitoring given that our custom program contains more detailed error information that we would like to make available to CCMS in case a particular batch job fails. Can someone provide guidance on how to develop such a solution and what steps are involved. We imagine that there are SAP standard procedures (e.g. function modules or BAPI, etc) that allow for error information to be feed to CCMS MTEs and trigger alerts. We have done some investigation but could not find the right answer. Any help is much appreciated.
Cheers Stefan

How to resolve After Effects CC 2014 error:

how to resolve After Effects CC 2014 error: Could not create the file '/Users/User/Library/Preferences/Adobe/After Effects/13.0/dummy'.
Every time I try launch any of my CC programs, i keep getting this error message, has anyone come across this before?
I tried uninstalling and but still got the same error after the reinstalling

fixing permissions problem that impedes start of Adobe applications

Installer / Uninstaller Error "No Error Information is Available"

Hello everyone,
I am trying to install the latest Flash Player for Firefox, Chrome, and Opera on Windows XP. Tried installing through firefox and the AdobeDLM addon. That failed.
Tried to install via Chrome via the "Download the Plug-in" version and when I run install_flash_player.exe I get the following error:
The Installation encounter errors:
No Error information is available"
Tried to unistall the previous version via the uninstall_flash_player.exe provided by Adobe, only to get the same error when running that.
Can anyone please suggest what I should do from this point?
Thanks in advance!
~John Jimenez

Hi, I'am experiencing exactly the same error.
Today firefox asked me to update flash to the latest version (running Windows 7). The uninstall of the previous version at least worked in so far that neither the IE nor the version for other browsers is listed in the programs control panel anymore.
But I'm not able to start the installation of the new version (tried Chrome, Firefox and IE as well as the installer files) or even start the uninstaller. In any case I get the adobe error message "The installation encountered errors: No error information is available".
Any ideas?

Can not open photshop CC 2014 ERROR could not initialize Photoshop because of a program error

Hi
I can not open Photshop CC 2014
ERROR
could not initialize Photoshop because of a program error

I've had the same error happen to me. I deleted the preferences file, updated JAVA, etc. none of which worked.
I've spent days systematically working to isolate the variable that seems to make Photoshop work one day and "not initialize" the next. I simply can't afford to stop work when Photoshop doesn't want to initialize due to: PSOWLListenerProxyBaseCocoa.mm : 52 : REQUIRE failed
Apologies, but I REQUIRE YOU TO INITIALIZE!
I think that I've isolated the problem. I have a dual monitor set-up. Sometimes I use the second monitor and sometimes I don't, sometimes monitor 2 is powered on and sometimes it's not. It's really the only thing with any variance on my system. I disconnected my second monitor. Then I clicked the Photoshop icon and the program opened...
I am running OS X 10.9 and Photoshop CS 5.1
There appears to be a link between Photoshop not wanting to initialize and Graphics Card / Monitors.

Dreamviewer CS5 opens but shuts down right after first view again and again...without no error information

I have Adobe Premium CS5 for MAC. My Dreamviewer CS5 opens but shuts down right after first view again and again. With no error information.
I have tried to download it again (web download link) with reopening the computer, but still it does not work.
Did not ask any serial numbers at all so I assume I was able to "smell" existing program on computer.
As Dreamviewer is part of bigger package, do i have to install only this program, web design set or what?
Do I have to download some other programs to get it work? All other graphic and web programs open and work properly.
What to do? Will it install it again if not uninstalled first?

For something like this, I would try clearing the program cache first: Deleting a corrupted cache file
Then restore preferences if the cache trick didn't work: Restore preferences | Dreamweaver CS4, CS5, CS5.5, CS6
And finally, if neither work, reinstalling using the cleaner tool instructions here: Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

VTO-2014 Error - Informative

Similar Messages

Maybe you are looking for