VTX3D AMD Radeon HD 7870 Tahiti LE Graphics Card + MSI 990XA-GD55 - motherboard

Hi,
Just trying to do a build, got the computer running with a old graphics card but when I put in the Radeon 7870 card no signal is sent, the card fan spins so guess its fully powered, just took battery out to refresh CMOS so will try again after a hour, have read some comments on flashing the BIOS can sometimes cure it, the board version is MS7640 v4.0 , so guess thats the 7640vM4.zip update? Tia

Board: 990XA-GD55
Bios: Version 22.1
VGA: NVIDIA GeForce 8400 GS( dug a old one out for testing and works fine) VTX3D AMD Radeon HD 7870 Tahiti LE Graphics Card ( is what I'm trying to run)
PSU: Master G-Series G600W 80+ Single +12V rail
3.60 gigahertz AMD FX-4100 Quad-Core
MEM: Corsair 1600mhz 6gb cmx6gx3m3a1600c9 x 2
Cosair 1333mhz 8gb cmx8gx3m2a1333c9 x 2
g.skill rip 1600 8gb f3-12800cl8d-8gbxm x 2
OS: Windows 7 64bit Professional
Sorry for slow reply, been tied up with other things. Have 4 slots for ram , have had 4 used up with just corsair , same in each coloured slots and just 1 stick for testing , all works fine on old testing card, the 7870 still ain't being picked up from when the PC is first turned on. Please don't tell me card is duff..... :/

Similar Messages

Windows 7 can't recognize my AMD Radeon HD 6970M 1024 MB graphics card

Hey community -
I am having issues running Star Wars the Old Republic on my brand new iMac desktop with Windows 7 installed. I am getting an error message that is associated with the fact that WINDOWS 7 will NOT recognize my AMD Radeon HD 6970M 1024 MB graphics card. Under the displays/drivers it's showing up as standard VGA graphics, which won't cut it.
I was recently having an issue missing drivers for my network card, which I fixed by going back through bootcamp and using a startup disk with all the drivers I needed.
HOW do I get Windows 7 to pickup/detect my Radeon? Help!
-Monty

You can install the AMD HD RADION Mobile drivers which work from.
If your Graphics card number ends in M
http://support.amd.com/us/gpudownload/windows/Pages/radeonmob_win7-64.aspx#2
This also depends on if you installed 32bit windows or 64 bit. you will need the 32bit drivers if installed 32 bit windows.
Download the full package under individual downloads.
But before you install the amd drivers you may need to install the boot camp drivers again, which include the motherboard drivers, sound, usb, etc etc etc.

Issues with CS5 Liquify in my iMac with a AMD Radeon HD 6970M 2048 MB Graphics Card

I have been trying to get to the bottom of this issue on my own, but to no avail. I am running Photoshop CS5.1 Extended on an iMac with an i7, 16 GB of RAM and an AMD Radeon HD 6970M 2048 MB graphic card. I am running OSX Lion. Speed of the computer should NOT be an issue, but my liquify tool is impossibly slow. I have seen others having this issue, but am not finding resolutions. I have updated all of my software (Lion, CS5) and updated my drivers. I have uninstalled Photoshop and reinstalled it, but still, no help.
My Liquify tool is so slow that it is impossible to use. It does not register if I release the mouse either and I often have to click a few times to release the brush. I have Photoshop 5.1 on a PC and the Liquify runs very smoothly.
Has this issue been addressed? I am wondering if it has a root in how CS5 is reacting to the graphics card? When I called Adobe, they swore it was Apple's fault. When I talked to Apple, they were positive the blame lay with Adobe. I just want a fix. (Hey, I'll take a CS6 beta if that'll fix it. )
Thank you,
Rachel

Do you have any third party plugins installed? If so, have you tried disabling them? (one was showng to cause a slowdown, but I don't have my office notes handy at the moment to remember which one)
Also, there was one obscure third party utiliity program (haxie) that also caused slowdowns in Liquify. (and again, my notes are at the office, so I don't recall the name)
And you can try the usual: trash/reset Photoshop's preferences.
Oh, and Lion still has a bunch of video driver bugs that Apple is continuing to work on.
Sorry I don't have more definite info right now.

Can't connect my 2009 Mac Pro to HDMI with an AMD Radeon HD 7870

That's the basic jist. I recently purchased an early 2009 3.33 GHz Mac Pro running OS X 10.8.5. Installed was an AMD Radeo HD 7870 2048 MB graphics card, which has an hdmi port. I'm able to connect a display via the mini-DVI output, but when connecting through the HDMI input on either my moniter (22" ViewSonic VX2270SMH-LED) or my tv (a 32" LG LED TV) there's no signal. When I plug the hdmi from the computer into one of the tv's two hdmi ports, it recognizes a device and asks to switch over. When I do, it tells me there's no signal.
Again, my specs:
Mac Pro Early 2009
Mac OS X 10.8.5
3.33 GHz Quad-Core Intel Xeon
16 GB 1066 MHZ DDR3 ECC
2 TB SATA Disk
AMD Radeo HD 7870 2048 MB
Help!
Many thanks.

To have your Mac adjust settings automatically, a display must answer with its name and capabilities when the Mac sends a query. The Mac sends such queries:
• at Startup,
• when you click the ( Detect Displays ) button [ try holding down Alt/Option key while viewing System Preferences > Displays] or
• when your Mac awakes from sleep.
So first set your display to the appropriate port. Next try a Restart, or Sleep and wake your Mac, or use the ( Detect Displays ) button.

XPS 8500, AMD Radeon HD 7870, TF2 Crashes

Team Fortress 2 crashes my XPS 8500. I have an AMD Radeon HD 7870. It always crashes, ALWAYS. There are wild audio and screen artifacts associated w/ this. Often the card dies and I get a message that the card failed but then recovered. The game whites out and must be forced to close. Sometimes I get some kind of computer lock, screen goes black, fans are whirring. Sometimes the crash is at game load screen, right after launch. Sometimes crash happens 10-30 minutes in. It always crashed this machine, but recently the frequency is off the charts. The machine is two years old. Dell replaced the GFX card once with a new one due to failure. I have issues on other games on very rare occasions but TF2 is a guarantee crash. The card is not OC and everything else is pretty stock Dell. I'm in Win 8.1. I've tried:
Browsed Steam forums to little avail
Tweak screen resolution
Play in Windowed mode
Lowered in game specs
Roll back AMD drivers ( this makes things worse for entire machine )
Turned ON Vertical Refresh + Open GL Triple Buffering
Among other things
I'm running out of ideas. Is this a power supply issue?

The EVGA 560 needs a 650W power supply with 2X PCI-E power connections. Card Length is not an issue with the XPS 8500.
That card Works fine in my Inspiron 620.
Getting the power adapters in after is impossible imho but you can plug them up BEFORE inserting and then carefully put the card in.
Here is a better pic with better wiring.
8.6 aka 9 inch cards are a VERY TIGHT FIT. 10 inch Cards are IMPOSSIBLE as are 12 inch cards. On Inspiron 620 or 3847

AMD Radeon HD 8650G + 8750M Dual Graphics and lower WEI score... and keyboard "softness"

HP ENVY 15 Notebook PC
AMD A10-5750M APU with Radeon(tm) HD Graphics
16GB RAM
AMD Radeon HD 8650G + 8750M Dual Graphics
Hello I just purchased this machine. Given are the basic specs. Why would the AMD Radeon HD 8650G + 8750M Dual Graphics score a 5.9 on the WEI when my two year old hp with an A8-3500 with the 6620G + 6750M scored a 6.5.. I am wondering if this new machine is actually graphically slower. Any Advice?
Second question: Is it normal for the envy to have a soft spot in the keyboard where you have visible flex. while pressing the W, S, A, D, E there is visible deformation. All the other keys seem solid.
I am debating returning this machine already. Any help.

Are you comparing WEI scores from the same OS??? That is Windows 7 to Windows 7... Windows 8 to Window 8... or Windows 8 to Window 7???
Comparing scores generated by different generations of Windows doesn't mean anything. Notice that the scale on Windows 7 runs from 1 to 7.9 and Windows 8 runs from 1 to 9.9 . Notice that the graphics scores for both 2D and 3D graphics are lower on Windows 8. Windows Vista, 7, and 8 all use different parameters to determine the scores.
Also, the architecture of the APUs has changed a little of the past couple of generations. And an 8750M and 6750M are basically the same GPU, so the scores should be roughly the same when using the same driver and OS for a comparision.
Please send KUDOS
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

ATI Radeon X1900 XT 512 MB graphics card has failed?

I think my ATI Radeon X1900 XT 512 MB graphics card has failed...
This is a MacPro 1,1 (2006). We're on our yacht in a French territory, South Pacific, so local support is non-obtainium. I would appreciate any advice on how I can confirm my graphics card is dead.
I have only 23" Apple Cinema Display for testing. The display works great on MBP, so that end is good.
The MacPro seems to boot normally - AFAIK based on startup sounds, fan, RAM LED diagnostic lights.
Suggestions?

Case A) the screen goes blank at the login screen
invoke Safe Mode (hold down the Shift key at Startup).
This performs a five minutes or so Disk Utility ( Repair Disk) on the boot drive, then demands your userId and password, even if you normally auto-login.
Safe Mode only loads the absolutely essential Drivers, and the graphics drivers are not considered essential. So screen re-draw may be slow, but you can check your email, surf a little, do many operations that do not require graphics acceleration.
Edit movies? Probably not.
Case B) your screen completely blank
If the power-on light flashes in a pattern, that indicates not enough good RAM to start up.
If no power light flashing, you need some function you can invoke that will show a non-graphics result.
The Caps Lock light on the keyboard is under software Control. If it works, at least the SMC controller that talks to the keyboard is working.
Holding down Control while pressing the Eject key on the keyboard brings up this familiar dialog box, whether you can see it or not:
any key except:
R for Restart;
S for Sleep;
Esc for cancel;
and return for the default Shut Down
should cause the System Beep sound. S should Sleep it, and the power light should shortly indicate that it is sleeping. Any key will then wake it up.

Is my ATI Radeon 3100 Graphics card wielded to the MotherBoard?...

Hello guys, I was just needing to know if my ATI Radeon 3100 Graphics card wielded to the MotherBoard, the reason I'm asking is BC I'm needing to upgrade my Video Card to NVidia so that I can get 60 FPS in my Games, right now I'm getting half that which is 30 FPS and sometimes it drops to 4 FPS. LOL can you believe that?, 4 FPS LMAO come on man, somethings gotta be better than ATI Radeon 3100....Hope to hear from you...

I'm just not sure what is going on - that error is what Mac Mini's and others with onboard video have when they try to run FCE/FCP, and there is a workaround mentioned here:
http://discussions.apple.com/message.jspa?messageID=1609878
Of course, your MBP has the ATI card, not onboard video.
I did a clean install of FCE 3 HD ( PPC ) and then upgraded immediately to FCE 3.5 HD ( Universal ) and have experienced no problems with it.

Is there a difference between the ati radeon 2600xt mobility and pro graphic cards?

After checking apples support website for compatible open-cl graphic cards, they list the ati radeon 2600xt as not compatible. The models listed for this card is the mac pro 2008. However, I have an imac 2.4ghz dual core with the mobility version of the same card. Does anyone know if my imac is compatible?
Thanks

I found the discrepancy.
Under bootcamp, windows vista identifies the graphics card as an 'ATI Mobility HD Radeon 2600 XT'
Under Lion X, the graphics card is identified as an 'ATI Radeon HD 2600 Pro'
Go figure

[Help] MSI radeon 7870 2GB OC problem on MSI - Z77A-GD55

Installed my new GPU onto my MSI - Z77A-GD55 , but monitor stays in power save mode , switched the GPU to the lower PCI2.0 slot (there are 3 of them) top 2 are PCIE 3.0 and the lowest is 2.0 and it worked , but the problem my GPU Fans cannot fit because of the USB/POWER ON-OFF top case buttons(wires) since its right next to the PCI 2.0 slot.
Bios is updated to the latest version 1.11
PCI-gen3 is on Auto in the bios settings (There is only Auto and Disable) option.
Any one has this issue before?

Quote from: flobelix on 02-January-14, 21:07:20
Did any card before work in the PCI-E 3.0 slots?
Yes my old ati radeon 4670 BUT i had this issue again first time i added the old GPU right as i bought the motherboard (1 year ago ) where my screen would be in Power save mode , but i removed my ram , removed power cable to drain power , and my GPU worked , from that i never removed / added anything in my computer (hardware wise) so this problem was here right from the start , the thing is i fixed it the 1st time , but i did had the 1.1 bios (even though i tried installing the new GPU on the 1.1 version and it didnt worked so i updated my bios to 1.11 and still the same issue)
Also as this motherboard has 3 PCI slots 2 are PCIE3 and the lowest is 2.0 (on 2.0 my old/new GPU works fine , devise manager sees it and drivers working aswell) but not on the other 2 PCIEx3 slots , maybe the top PCIE ex3 slot is broken, but the 2nd PCIe3 slot i never installed anything there, and still doesnt work aswell , so i think its either some issue in the BIOS settings
Some bios settings i could find that has to do with GPU
PCI Subsystem Settings : PCie GEN3 [Auto] / Latency Timer [32 PCi bus Clocks] /
Integrated Graphics Devises : Initiate Graphics Adapter [ PEG] / Initiate Graphics Share memory [32mb] / DVMT Memory [128mb] / IGD Multimonitor [Disabled]
Bios Version : E7751IMS v1.11

Will the XFX Radeon R7750 2gb Core-Edition graphics card work in the 2006 mac pro?

I purchased this graphics card and was wondering if it'll work in the early 2006 model mac pro. This mac pro has 2x3GHz Dual-Core Intel xeon cpu, 4gb 667 MHz DDR2 FB-DIMM RAM, ATI Radeon X1900 XT 512MB graphics, and has OS X Lion installed. Thanks!
I also have an EVGA 600watt power supply, can this also be installed?

User Tip: Mac Pro silver tower (2006-2012) Replacement Graphics cards

Is this video graphic card compatible with the motherboard?

Hello,
I only have one question, is nVidia GeForce GT430, 1024MB, GDDR3, 128bit, DVI-I, HDMI, PCI-E compatible with MSI K9N neo v2 ?
The slot for the graphic card : PCI Express 2.0 x16
For the motherdoard: • 1 PCI Express x16 slot
• 2 PCI Express x1 slots
• 3 PCI slots, support 3.3V/ 5V PCI bus Interface
Will it work? Does it lose performance?
Thank you very much

Yes, should works
Quote
Does it lose performance?
no

Graphics card for intel DG965RY motherboard

Hi All,
I would like to purchase a graphics card for my Intel DG965RY motherboard.
What GPU/graphics card is compatible for Intel DG965RY MB?
Please help.
Thanks

Hello,
this forum is dedicated to MSI Retail products only. That is why we do generally not allow topics that deal with mainboards of other manufacturers. Nobody here can give you much advice on compatibility questions regarding a specific Intel Board anyway.
The best thing for you to do is to look for help in a forum for Intel products or in a general hardware forum. Or perhaps you can contact Intel directly whether or not there are any known compatibility problems with certain video cards.
Regarding MSI video cards, you can browse through the whole menu of models on this site:
http://eu.msi.com/product/vga/
------ TOPIC LOCKED ------

Is my graphics card soldered to my motherboard

I wanted to know if my HP ProBook 450 G1 has a built in graphics card that is soldered to it permanantly. It uses an intel inside core i5-4200M CPU.

Hi:
Yes it is.
It is not a removable 'card.'
It is a GPU chip which is part of the motherboard.

MOVED: MSI Amd Radeon HD 7870 Hawk won't overclock

This topic has been moved to Overclocking, Undervolting.
https://forum-en.msi.com/index.php?topic=165481.0

Interestingly enough, after reading your post, I did some checking with mine. I have the core voltage bumped up to 1.237 in afterburner (note: it rounds the voltage to the nearest 3/10 of a volt I think) and the clock at 1150 for testing, down from 1200 where it's been for a couple of months due to recent crashes in BL2.
Both GPU-Z and HWiNFO64 show 0.825v at idle and 1.219v under load! Afterburner, however, shows 1.3v using it's in system tray monitoring tool.
So now I don't know what to believe. It seems as if it's not changing for me as well.
Tomorrow I'm going to hook up the leads and check it with my VOM so I can see for myself.

VTX3D AMD Radeon HD 7870 Tahiti LE Graphics Card + MSI 990XA-GD55 - motherboard

Similar Messages

Maybe you are looking for