VUESCAN & V550 EPSON SCANNER

I need some help from the experts here. I recently bought Vuescan in order to get the best out of my new Epson 550V. But the Vuescan does not see that scanner. I also have a Canon all in one printer that scans & Vuescan does see & scan from it.
The Epson Scanner software does see & scan from the 550
Image cature only offers the Canon all in one as a source but not the Epson.
System Printer & Scanner prefs pane does not see the Epson scanner
In "about this mac" system report" USB it does see that the Epson scanner is connected to the computer
I exchaned many emails with Ed Hamerick of Vuescan but he finnally gave up & could not resolve the problem
Does any have any ideas as to how I can get this epson scanner recognized by vuescan as well as image capture?

For those who come across this problem I have found a soution.
Sometime I get very motivated by a challenge!!! I noticed a posting on the Appe Discussion Board about ICA driver that would allow for using the Epson Scanner in Image Capture so I d loaded it from http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid= 231162&prodoid=63097270&infoType=Downloads&detected=yes&platform=OSF_M_X9 &
After I installed the ICA driver everything was fixed. The Epson Scanner shows up in Vuescan & works properly. It now shows up in “Printer & Scanner” preference pane, & it shows up in Image Capture.

Similar Messages

Image Capture for Epson Scanner producing very dark results

I recently upgraded to a new iMac running Mountain Lion. I have a new Epson Perfection v750 Pro scanner, which I use to scan film negatives. I had previously been working with this scanner on a Windows 7 PC. Using Image Capture, I am getting wildly different results -- the resulting scan is completely dark. Is there a setting that I am missing somewhere?
I've attached a little preview picture that shows the difference between a scan of the same image, with my PC vs my Mac.

There is no Epson scanner utility for Mountain Lion, it appears. Even Epson's FAQ defers to Image Capture and says it only provides software for image modification.
http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&info Type=FAQ&oid=207953&foid=214278&cat=214269&subcat=214264
Unfortunately Image Capture completely fails to provide the service it should be expected to. The 3rd party software VueScan seems like it would be adequate once I learned how to manipulate it a little more, but ultimately the only decision I can justify is to hook up the scanner to my Windows PC and use the TWAIN-based scan utility there.
If there's anywhere I can make an official plea to Apple to get Image Capture in a workable state, feel free to point the way.

Problems with Image Capture for Epson Scanner

When using image capture for my Epson scanner, at the Image Correction, when I select Manual I get no menu options.

There is no Epson scanner utility for Mountain Lion, it appears. Even Epson's FAQ defers to Image Capture and says it only provides software for image modification.
http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&info Type=FAQ&oid=207953&foid=214278&cat=214269&subcat=214264
Unfortunately Image Capture completely fails to provide the service it should be expected to. The 3rd party software VueScan seems like it would be adequate once I learned how to manipulate it a little more, but ultimately the only decision I can justify is to hook up the scanner to my Windows PC and use the TWAIN-based scan utility there.
If there's anywhere I can make an official plea to Apple to get Image Capture in a workable state, feel free to point the way.

Why won't my epson scanner work with Mountian Lion?

Since I loaded Mountain Lion, my Epson perfection 4490 Photo scanner won't load. It keeps saying "can't open application cuz PowerPC applications are no longer supported." I downloaded a new driver from Epson and did a software update and restarted my computer but it still won't connect to the scanner. What am I missing? Should I uninstall my epson scanner and then reinstall? Help!

Part 1 - the driver. If you already had an Epson driver & software installed before you upgraded to Mt. Lion, then yes you should uninstall the Epson software. Epson provides a utility to do this on their support website. After uninstalling the old driver & software, follow the Epson instructions for installing their ICA Scanner Driver, which basically involves connecting your 4490 to your Mac and then running Software Update. This driver needs to be installed for almost any scanning app to work with your 4490 on Mt. Lion, including Image Capture and Vuescan
Part 2 - the scanner software. Epson discontinued the Epson Scan Utility when Lion was introduced. It is only supported on versions of OS X up to Snow Leopard. If you want the functionality of Epson Scan on Lion or Mt. Lion then you need to get Vuescan, SilverFast or similar scanner software. I highly recommend Vuescan ... have used it for many years on almost every version of OS X and a bunch of different scanners including my own Epson Perfection 4490.

Epson Scanner requires "G3 or later"

We are considering the purchase of an Epson scanner that lists "G3 or later with built-in USB" as part of the Mac compatibility requirements. It has 2 built-in USB ports, but I'm embarrassed to say, I have no idea what G3 means in this context... The processor (it's an iMac 5) is an Intel Core Duo 2. We are a not-for-profit and received the iMac as a donation, never used still in box, so we can upgrade it if necessary, but what is G3? Is that a processor? Help...
Message was edited by: LibertyAmy

LibertyAmy,
Welcome to Apple Support Discussions.
G3 is referring to an earlier model of iMac using what was called a G3 micro processor. In short, it's a machine that was made prior to your Intel Core 2 Duo. What you need to do to find out if the scanner is compatible is to:
1. Check what version of OS X is on your iMac. This is easily done by clicking on the  in the upper left of your screen and click About this Mac. It will tell you exactly what version of OS X is installed.
2. Go to Epson's web site and then search for the model scanner and see if it supports the version of OS X you have installed on your iMac.
NOTE: If Epson doesn't directly support it you can purchase VueScan. Simply click on the link and it will take you to the correct location. This tool is designed to work with most scanners and tends to get very good reviews.
Regards,
Roger

I have an Epson scanner that is apparently no longer supported because it is a PowerPC app. It's a very good scanner that worked fine until I upgraded to OS Mountain Lion on my MacBook Pro. Any suggestions on how I can continue to use it?

I have an Epson scanner that is apparently no longer supported because it is a PowerPC app. It's a very good scanner that worked fine until I upgraded to OS Mountain Lion on my MacBook Pro. Any suggestions on how I can continue to use it?

For that model, Epson has this information:
ICA Scanner Driver
07/17/12
Description: The latest Mac OS X ICA scanner driver for your Epson product is available only via Apple's Software Update. Here's how to get it:
1. Connect the all-in-one or scanner to your Mac and power it on.
2. Select the  menu, then Software Update.
3. Follow the on-screen instructions to install the available updates.
Note: Software Updates may find multiple updates for your system. You may choose to install all or some of the updates by clicking on Show Details.
Compatible Systems: Mac OS X (v10.8.x)

I upgraded to 10.8.4 and now it won't let me use my Epson scanner, saying "power pc applications are no longer supported." How do I make it work?

I upgraded to 10.8.4 and now I can' use my Epson scanner I get a message saying, "ou can't open the application Epson Scan apps because Power PC applications are no longer supported." I also can't synch my old Palm Pilot for the same reason.
How can I fix this?

We need to sort out some facts here first:
• You cannot be running Mt. Lion on your iMac G5. What Mac is it? What is the Model Identifier listed in About This Mac; More Info; Hardware Overview
• What is the model of your Epson Scanner?
• Have you attempted to scan using Image Capture, located in your Applications folder?
• Your Palm Pilot software will only run in Snow Leopard; so depending upon which Mac you have, you will either have to:
1) partition your hard drive or add an external hard drive and install Snow Leopard into it to "dual-boot" when you want to access you Palm software, or
2) install Snow Leopard Server (now available from Apple for $20 telephone orders USA & Canda only) into Parallels 8 to run your Palm software in Mt. Lion:
[click on image to enlarge]

I have upgraded to Mountain Lion and have found that some of my software no longer works, notably Image Browser and also the Epson Scanner Perfection 3490 software. Is there a 'patch' or way to allow me to use these programmes especially the scanner.

I have upgraded to Mountain Lion and have found that some of my software no longer works, notably Image Browser and also the Epson Scanner Perfection 3490 software. Is there a 'patch' or way to allow me to use these programmes especially the scanner.

Apple discontinued support for PowerPC apps with Lion, I think, so you're out of luck there. No patch coming, unfortunately. Best to upgrade whatever old applications you have or, since it seems like you're using some relatively old software, scout around for replacements that give you the functionality you need.
Go to Apple menu > System Preferences > Print & Scan and select your scanner from the list--if it's not there you'll need to add it (start with the little plus icon). Once you have it in the list you can click on the Open Scanner button and a pretty barebones scanner driver will load for you. But Image Capture (as mentioned previously), found in your Applications folder, will probably do the job as adequately, or better, than your old scanner software.

After upgrading to mavericks my epson scanner in not usable

after upgrading to mavericks my epson scanner in not usable

Hi XinaK,
Is you Workforce 600 is online and connected ?
Infos from Epson :
Do one of the following:
USB
Connect your product to your Mac using a USB cable and make sure the product is turned on.
Wireless
Connect your product to your router wirelessly and make sure the product is turned on. Note: You'll need to use the product's control panel to establish the connection to your router.
Ethernet
Connect your product to your Mac using an Ethernet cable and make sure the product is turned on.

Compatibility of epson scanner w/ intel imac

I have 2 new intel imacs, as well as a G4 imac. I'm trying to connect my new Epson scanner (Perfection 4990 Photo). When installing the software, it is looking for a classic environment. The online drivers from Epson's website seem to be for v10.4.4, and I'm running 10.4.10. Does anyone know whether this Epson scanner is just plain incompatible with the intel steel imacs? I have tried to contact Epson in various ways, all with no success. I'm a graphic designer and have previously had success w/ Epson scanners, but I'm tearing my hair out and ready to pack it up and return it for another brand. Their lack of support is outrageous. Does anyone share this experience or have any advice??? I'd appreciate it.

What do you mean that it is looking for the classic environment?
Are you able to open the .dmg successfully?
BTW, this is the discussion area for the much older iMac G3 CRT. You should post future questions in the Intel iMac discussion area.

I Have a Macbook Pro that does not have a disk drive. How do I install the Adobe Photoshop Elements 11 that came with the Epson scanner I purchased. I registered the S/N and I can't find the Free download anywhere only trials.

I Have a Macbook Pro that does not have a disk drive. How do I install the Adobe Photoshop Elements 11 that came with the Epson scanner I purchased. I registered the S/N and I can't find the Free download anywhere only trials.

Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Microsoft problem in image aquisition from Epson scanner

I cannot get my Epson Perfection 3200 Photo to scan even using its own Epson Scan program. I always used Photoshop 7 to scan and import the images easily. Then we moved to a new house, and when I went to reconnect everything, Microsoft doesn't recognize the Epson scanner no matter what I do. Epson technicians were not able to help. I believe that it's a Microsoft acquisition problem. It says "Could not open the TWAIN source". Should I just remove everything that has to do with Epson, even the plug-in in Photoshop, then recalibrate my monitor and reload Epson after that? --thank you, L Williamson

Re-installing is the first step, make sure after the un-install that you remove any vestiges of the install left over. Disconnect the scanner while doing this. After you are finished, shut off the computer, re-connect and start the scanner, start the computer again and let Windows find it and then install the latest software for the scanner.

How can I use the Epson scanner Perfection V600 Photo in Photoshop cs5.1

How can I use the Epson scanner Perfection V600 Photo in Photoshop cs5.1
I am not able to see the scanner in photoshop.

Are you using a mac or windows? And what version?

Photoshop Elements 8 import from Epson Scanner?

How can I get Photoshop Elements 8 to import from my Epson scanner? On my previous computer, the scanner just showed up when I selected "Import" under File? I've spent 2.0 hours with the supposed "tech support" in India and they had no idea. I've been using Elements 4 on my iMac for years and it worked perfectly. Help!
I'm starting to learn that I just spent good money for Elements 8 for nothing. It would appear that Epson has refused to make a TWAIN plugin for Photoshop Elements 8 so it will talk to the scanner and the program seems to be filled with bugs wshen used with Snow Leopard. Anyone have any answers?

There is a Photoshop Elements forum.
http://forums.adobe.com/community/photoshop_elements

Adobe Acrobat XI Pro.   Scanning SPEED is very SLOW (1) page in 30 seconds        EPSON Scanner softwear    speed is (27) per Minute

HELP    with   Scanning Speed
[email protected]

May 26, 2014 @ 12:59pm - ADOBE
        In receipt of below Message.
            We would never went to store & obtain ...... ADOBE Acrobat - PRO,
            if we had known about it taking ................... (45) Seconds in ADOBE to ( scan ) a simple - Black & White sheet.
            EPSON Scanner using Adobe software   scans at .................... (27) sheet a Minute.

VUESCAN & V550 EPSON SCANNER

Similar Messages

Maybe you are looking for