VVX 600 and device data
We are just starting the roll out of the VVX phones (VVX 600 specifically) on our Lync 2013 environment. We have begun to notice that users that use the VVX for calls do not get device data written to the database. I am looking at the monitoring log and
the call does not report subnet, MAC address, etc. In fact, the 'Callee report received' is 'False'. It is consistent on all VVX phones.
I have looked at the VVX config and cannot see anywhere where I can force this to be reported. The VVXs are all on the latest UC version 5.2.0.8330.
Hi,
Did you use IP Phone Inventory Report ready?
If not, please try to use it to get the information:
https://technet.microsoft.com/en-us/library/gg615027.aspx
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support
Similar Messages
-
Mobile Device date and time Restrication
Hi,
Is any policies in Intune to restrict the users to not change the Mobile device Date and Time.
Shailendra Devthanks geery,
Also is below things possible through MS Intune for Windows Phone 8.1 , as i have checked the technet as of now below features not supported for Windows Phone 8.1 . can I manage the Blackberry devices from Ms Intune...?
also one things i want to know from you is currently MS intune features changes very frequents hence is any sites that i can subscribe for updates about Ms Intune..
Features that i am looking for Windows Phones
1. Browser Restriction
2. Mobile Application Management Policy
Shailendra Dev -
Dear all,
When I create a notification in SAP Work Manager 6.0, the notification gets created in the back-end with Start Date equal to Current Date + 1 day and End Date equal to Current Date + 3 days.
Can you advise where I can customize this behaviour, so that the Start Date is for example equal to the Current Date and End Date being 14 days in the future? Is this something that would need to be configured in Agentry Editor or within the ABAP stack?
Many thanks for your support.
Pavel
Tags edited by: Michael ApplebyHi Jason,
We went this route and identified the initial values, and tried to modify those.
No impact though, as if those values are being overwritten elsewhere (whatever value we set, no change on the backend).
Please see the attachments with screenshots of Agentry Editor.
Many thanks.
Pavel -
hello, i recently merged my Sync data with New device Data , because the option MERGE THIS DEVIC's DATA WITH SYNC DATA was checked, how can i recover my stuff back ? from a previous state
Sorry, SYNC don't have that option right now
-
Iphone 5s and "forced data useage"
Hi all,
I was an android guy for years but finally went for an iphone 5s this time around and signed up with Verizon for the new $45 plan. Unltd Text, talk, and 250MB of data or AKA "The Wifi Only Plan." I came from metro PCS and enjoyed the same deal, but now I get with a better carrier with better coverage. I am fine with a low data amount plan because I have wifi at home and work. But this iphone 5s is forcing me to use data and I believe that it is not fair and want a rep to chime in on this situation. Some of the points may be able to be fixed on my end - so let me know how, but i think most are in a catch 22.
1) Most importantly... Voicemail. I go to the voicemail icon on my phone and if my cellur data is disabled... then I can not reach it. This forces me to turn on my data just to fetch voicemail which is a basic service and should be inclusive into my unlimited voice portion of the plan. Is there a way in the iphone 5s to get around this?
2) iMessage. This is sent across the data line of the carrier. I have had a few problems sending and receiving messages iphone to iphone because I have supposedly turned the data feature to iMessage off. Not good, not reliable service.
3) System Services. Eventhough it is only KBs of data it is still my data pool and should not have to pay for the auto system services that run on the phone. If I can control this on Iphone, lemme know where, but it seems that if I turn my data on for my phone these will auto send and receive data to where as individual apps I can block.
Also is there a data warning text I can receive when I get close to my monthly alotment?I'm not a rep, but ....
1. Dial *86 instead of using the built in Visual Voice Mail.
2. Don't use iMessage. Unassociate your device with iMessage. Turn it off and just use SMS.
3. You can't change that. And as you noted, it doesn't use much data.
Yes. Log in to your My Verizon account you can set data alerts. -
How do I make a VI that contols a 6534 card take less time to load 1Mbyte and output data ?
Hello-
I'm developing a pattern generation burst mode type VI that reads byte characters from a text file, manipulates the bytes that it reads and then outputs the data from a 6534 card. The REQ1 pin is pulled high which makes the card continually output data until the internal buffer is empty. An internal clock is used. The problem is that the size of the file that is read by the VI can be relatively large, in the 1MByte range. After the VI manipulation, the output array is 16 times larger than the input string. So, when the VI reads a 1MByte text file, the output array contains 16 million entries (each array entry is 3 bits by the way). It takes about 20 seco
nds to run and output data from the 6534 even when reading files that are 200kbyte or so. I'm outputting the data at 5Mbps. I'm not sure where all the delay is coming from. Using the 'Profile VI" function under the 'Tools' menu shows a snapshot of time that really doesn't help me since it only shows that the time is spent in my VI. Is this just the result of loading large files ? Or, is there a way to preload the 1MByte file into the 32MB of RAM on the 6534 card before the VI is actually run. What I mean is that I do have the option in my system to have a time when all text files will somehow be loaded into the 6534 memory, during some initialization period, and then the VI would be run with the text file already loaded. This of course assumes that the delay is loading the file from the harddrive, but since the harddrive transfer speed is fast, I have no idea where to speed things up. Any ideas ? Thanks !Your question actually belongs to the Measurement Devices >> Digital IO section since it concerns operating the 653x family of digital boards. You will see other related questions and answers there. In the future, please direct your digital questions to that forum.
If you are trying to profile your VI, you can break it into different pieces. For instance, you can make a subVI out of the file data manipulation.
Now, are you doing pattern generation or burst mode handshaking output? From your description of the signal connections, it looks like burst mode. You can double-check in the 653x User Manual at the http://www.ni.com/manuals pages. Still, it looks like you could accomplish your task with pattern generation. There are example VIs for both operations that
I suggest you start with. They are located in the LabVIEW >> Examples >> Daq >> Digital >> 653x.llb directory.
It also sounds like you are doing a single buffered operation, where you have a set amount of data that you want to output, and once done, the VI will stop. You are preloading the data to the buffer at DIO Write.vi before the 6534 actually outputs the data with DIO Start.vi when you program like the examples.
Thus, start with the appropriate example and then add the File I/O to it. You can even test with a smaller file to see the effects. You will also find useful information concerning the 6534 in the KnowledgeBase, particularly KnowledgeBase 298CGF9M "How Many Samples of Data Can I Store in the Onboard Memory of the NI 6534?". You can find this online by going to the http://www.ni.com/support and choosing KnowledgeBase from the Technical Resources pull-down menu. Then, type in keywords to search for, such as "6534".
Regards,
Geneva L.
Applications Engineering
Nati
onal Instruments
http://www.ni.com/ask -
Questions on managing iTunes content and devices?
I've been a subpar iTunes user for several years now and I figured it was time that I just started asking some questions in order to get help. I love all my different iOS devices, but at times it seems that it's extremely difficult to manage content amongst the devices as well as my different computers (I use a PC for personal use and a Macbook for work.) My wife also has her own iOS device (Which we just use my AppleID on to keep all purchases under a single account) and a PC. So it seems like a constant juggling act to keep my content properly managed.
The new iCloud stuff looks like a wonderful step in the right direction for helping manage content on my different devices, but I'm still a little curious about the best way to go about storing, sharing, and accessing content. So all that being said, here's my current setup and questions.
First of all, I have my iTunes Media Folder on set to save everything to a Network Attached Storage I have at my home. This is the version of iTunes that I run off of my PC, which I guess I would say is my primary source of iTunes usage and how I generally choose to manage my content and move things to and from my iOS devices. Everything works out pretty well until I try and manage my content on any other computer.
Creating a consistent storage location on a NAS
My first basic question is, "Is it possible to have multiple versions of iTunes on different computers point to the same Media Folder?" If I could have all of my iTunes folders work off the same Media Folder that would probably help cut down on the confusion. However, I'm not exactly sure if this is just a matter of giving them all the same path to use or if there's additional permissions and things that must be setup. Also, what happens if I decide to purchase content through iTunes and I'm not connected to my home network, so the content cannot be saved to my NAS? Does it save to a default location that I can just later move to my NAS?
Home Sharing
What exactly is "Home Sharing"? I've read a little bit about it but I'm not 100% sure what it actually gets me since I already have a NAS. Is this what I need for setting up multiple computers to share the same Media Folder? Do I need this at all since my data is located on a central NAS on our home network?
Syncing devices from multiple computers
One of the biggest headaches I get with trying to manage content across multiple computers and devices is that I have to use one specific computer to Sync and Manage content on a device. For example, I have my iPhone synced to iTunes on my PC so I can edit and manage music on that device from my PC. But if I'm at work on my Macbook and decide I want to make some changes to Music I have there, then I have to sync my device to the Macbook, effectively wiping all the current content on my phone. Is there no way around this?
iCloud Questions
I have content that I've purchased on my iPhone or iPad and want to download it from the cloud to my PC or Macbook, or my wife's computer. Do I have to "repurchase" this content in order to do that, or does it just download directly for free since I've already purchased it before?
I apologize if any of these are "silly" questions. I've tried to read up on this stuff but I still have difficulty completely understanding it.I've been a subpar iTunes user for several years now and I figured it was time that I just started asking some questions in order to get help. I love all my different iOS devices, but at times it seems that it's extremely difficult to manage content amongst the devices as well as my different computers (I use a PC for personal use and a Macbook for work.) My wife also has her own iOS device (Which we just use my AppleID on to keep all purchases under a single account) and a PC. So it seems like a constant juggling act to keep my content properly managed.
The new iCloud stuff looks like a wonderful step in the right direction for helping manage content on my different devices, but I'm still a little curious about the best way to go about storing, sharing, and accessing content. So all that being said, here's my current setup and questions.
First of all, I have my iTunes Media Folder on set to save everything to a Network Attached Storage I have at my home. This is the version of iTunes that I run off of my PC, which I guess I would say is my primary source of iTunes usage and how I generally choose to manage my content and move things to and from my iOS devices. Everything works out pretty well until I try and manage my content on any other computer.
Creating a consistent storage location on a NAS
My first basic question is, "Is it possible to have multiple versions of iTunes on different computers point to the same Media Folder?" If I could have all of my iTunes folders work off the same Media Folder that would probably help cut down on the confusion. However, I'm not exactly sure if this is just a matter of giving them all the same path to use or if there's additional permissions and things that must be setup. Also, what happens if I decide to purchase content through iTunes and I'm not connected to my home network, so the content cannot be saved to my NAS? Does it save to a default location that I can just later move to my NAS?
Home Sharing
What exactly is "Home Sharing"? I've read a little bit about it but I'm not 100% sure what it actually gets me since I already have a NAS. Is this what I need for setting up multiple computers to share the same Media Folder? Do I need this at all since my data is located on a central NAS on our home network?
Syncing devices from multiple computers
One of the biggest headaches I get with trying to manage content across multiple computers and devices is that I have to use one specific computer to Sync and Manage content on a device. For example, I have my iPhone synced to iTunes on my PC so I can edit and manage music on that device from my PC. But if I'm at work on my Macbook and decide I want to make some changes to Music I have there, then I have to sync my device to the Macbook, effectively wiping all the current content on my phone. Is there no way around this?
iCloud Questions
I have content that I've purchased on my iPhone or iPad and want to download it from the cloud to my PC or Macbook, or my wife's computer. Do I have to "repurchase" this content in order to do that, or does it just download directly for free since I've already purchased it before?
I apologize if any of these are "silly" questions. I've tried to read up on this stuff but I still have difficulty completely understanding it. -
How can I share my schedule information with my wife on her accounts and devices?
My wife and I have separate accounts in our MacMini and MacBook. We each have an iPhone. She uses GMail. I use Mac Mail. How can I share my schedule information with my wife on her accounts and devices?
It is not advisable to follow the above suggested method. The following will do what you want without complications.
1. On your Mac, go to http://help.apple.com/icloud/#mm6b1a9479 and follow the instructions to share a calendar privately. If you have more than one calendar you want to share you will have to do each individually. You can choose whether she is able to edit it or whether it should be read-only.
2. If your wife does not have an iCloud account she will need to obtain one. When you share a calendar and nominate her to access it she will receive and email. All she has to do is to open the email and click 'Join Calendar'. This will add the calendar to her Calendar app on all devices and on icloud.com without affecting any other data. Again, this will have to be done individually if more than one calendar is involved. -
The Ultimate Guide to Resolving Profile and Device Manager Issues
The following article also applies to issues after re-setting the severs' hostname. It also applies to situations where re-setting the Code Signing Certifictateas described by Apple has not resolved the issue.
Hello,
I have been plagued with Profile Manager and Device Manager issues since day one.
I would like to share my experience and to suggest a way how to resolve issues such as device cannot be enrolled or Code Signing Certificate not accepted.
I shall try to be as brief as possible, just giving an overview of the steps that resolved my issues. The individual steps have been described elsewhere in this forum. For users who have purchased commercial SSL certs the following may not apply.
In my view many of these issues are caused by missing or faulty certificates. So let us first touch on the very complex matter of certificates.
Certificates come in many flavours such as CA (Certificate Authority), Code Signing Certificate, S/MIME and Server Identification.
(Mountain?) Lion Server creates a so-called Intermediate CA certificate (IntermediateCA_hostname_1") and Server Identification Certificate ("hostname") when it installs first. This is critical for the operation of many server functionalities, including Open Direcory. These certs together with the private/public keys can be found in your Keychain. Profile and Device Manager may need a Code Signing Certificate.
The most straightforward way to resolve the Profile Manaher issues is in my view to reset the server created certicates.
The bad news is that this procedure involves quite a few steps and at least 2 hours of your precious time because it means creating a fresh Direcory Master.
I hope that I have not forgotten to mention an important step. Readers' comments and addenda are welcome.
I shall outline a sensible strategy:
1. Clone your dysfunctional server to an external harddrive (SuperDuper does a reliable job)
2. Start the server fom the clone and shut down ALL services.
3. It may be sensible to set up a root user access.
4. Back-up all user data such as addess book, calendar and other data that you *may* need to set up your server.
5. Open Workgroup Manager and export all user and workgroup accounts to the drive that you using to re-build your server (it may cause problems if you back-up to an external drive).
6. Just in case you may also want to back-up the Profile Manager database and erase user profiles:
In Terminal (this applies to Lion Server - paths may be diferent in Mountain Lion !)
Backup: sudo pg_dump -U _postgres -c device_management > $HOME/device_management.sql
Erase database:
sudo /usr/share/devicemgr/backend/wipeDB.sh
7. Note your Directory (diradmin) password for later if you want to re-use it.
8. Open Open Server Admin and demote OD Master to Standalone Directory.
9. In Terminal delete the old Certificate Authority
sudo rm -R /var/root/Library/Application\ Support/Certificate\ Authority/
This step is crucial because else re-building you OD Master will fail.
9. Go back to Server Admin and promote the Standalone Directory to OD Master. You may want to use the same hostname.
10. When the OD Master is ready click on Overview and check that the LDAP and Keberos Realm reflect your server's hostname.
11. Go back to Workgroup Manager and re-import users and groups.
NOTE: passwords are not being exported. I do not know how to salvage user passwords. (Maybe passwords can be recovered by re-mporting an OD archive - comments welcome! ).
12. Go to Server App and reset passwords and (not to forget) user homefolder locations, in particular if you want to login from a network account!
If the home directory has not been defined you cannot login from a network account.
13. You may now want to restore Profile Manager user profiles in Terminal. Issue the following commands:
sudo serveradmin stop devicemgr
sudo serveradmin start postgres
sudo psql -U _postgres -d device_management -f $HOME/device_management.sql
sudo serveradmin start devicemgr
14. You can now switch back on your services, including Profile Manager.
In Profile Manager you may have to configure Device Management. This creates a correct Code Signng Certicate.
15. Check the certificate settings in Server App -> Hadware -> Settings-> SSL Certificates.
16. Check that Apple Push Notifications are set.(you easily check if they are working later)
17. You may want to re-boot OS Server from the clone now.
18. After re-boot open Server App and check that your server is running well.
19. Delete all profiles in System Preferences -> Profiles.
19. Login to Profile Manager. You should have all users and profiles back. In my experience devices have to be re-enrolled before profiles can be pushed and/or devices be enrolled. You may just as well delete the displayed devices now.
20. Grab one of your (portable) Macs that you want to enrol and go to (yourhostname)/mydevices and install the server's trust profile. The profile's name should read "Trust Profile for...) and underneath in green font "Verified".
21. Re-enrol that device. At this stage keep your finger's crossed and take a deep breath.
22. If the device has been successfully enrolled you may at last want to test if pushing profiles really works. Login to Profile Manager as admin, select the newly enrolled device. Check that Automatic Push is enabled (-> Profile -> General). Create a harmless management profile such as defining the dock's position on the target machine. (Do not forget to click SAVE at the end - this is easily missed here). If all is well Profile Manager will display an active task (sending) and the dock's position on the target will have changed in a few seconds if you are on a LAN (Note: If sending seems to take forever: check on the server machine and/or on your router that the proper ports are open and that incoming data is not intercepted by Little Snitch or similar software).
Note: if you intend to enrol an Apple iPhone you may first need to install the proper Apple Configuration software.
Now enjoy Profile and Device Manager !
Regards,
TwistanHI
1. In Action profiles, logon to system and recheck correcion are available in action definition as well in condition configuration and the schedule condition is also maintained. but the display is not coming(i.e in the worklist this action is not getting displayed).
You can check the schedule condition for the action and match the status values...or try recreating the action with schedule condition again....for customer specific ....copy the standard aciton with ur zname and make a schedule condition and check the same.
2, In suppport team of incident when i give individual processor it throwing a warning that u r not the processor. but when i give org unit it is working perfectly. Could anyone guide on this.
You need to have the empolyee role for BP ..goto BP and got here dropdown for ur bp and choose role Employee and then enter ur userid
also make sure that u have the message processing role
Hope it clarifies ur doubt and resolve ur prob
Regards
Prakhar -
My iPhone 5 has broken and is being replaced with a new iPhone tomorrow. However, My carrier (orange) will b picking up my broken iPhone and I am unsure how to secure the content and icloud data on the broken phone. Is there a way to disable the data held on it and ensure that if it is fixed, nobody can use/see my data and access my account?
Hi Gazpan,
Thanks for visiting Apple Support Communities.
I recommend using the steps in this article to back up your iPhone if possible:
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/ht1766
You may also find this advice helpful for your situation:
What to do before selling or giving away your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht5661
If you no longer have your iOS device
If you're using iCloud and Find My iPhone on the device, you can erase the device remotely and remove it from your account by signing in to icloud.com/find, selecting the device, and clicking Erase. When the device has been erased, click Remove from Account.
If you're unable to complete either of the above steps, you should change your Apple ID password. Changing your password won't remove any personal information that is cached on the device, but it will make sure that the new owner can't delete your information from iCloud.
Cheers,
Jeremy -
How to post and get data from server using Get Webrequest
Hi:-)
I'm trying to send a username and password argument my server and the server is suppose to send some string back. The following code, that I got of the web, just dies. I think this line:
HttpWebRequestpreq = result.AsyncState
asHttpWebRequest;
is null. Can you kindly fix this for me? Thank you in advance:-)
notes: I have a few textboxes with the values for the request params
I'm targeting Windows Phone 8.0 and Windows Phone 8.1 devices
privatevoidBtnSignUpSubmit_Tab(objectsender,
RoutedEventArgse)
//show error if Username == Username
if(TbUN.Text.ToString() ==
"Username")
MessageBox.Show("You
must fill in your Username in the Username textbox.\nThank you.");
return;
//make sure all fields are filled in
if(TbUN.Text.ToString() ==
""|| TbPW.Text.ToString()
== ""|| TbCPW.Text.ToString()
== "")
MessageBox.Show("All
fields must be filled in.\nThank you.");
return;
//make sure Password is the same as Confirm Password
if(TbPW.Text.CompareTo(TbCPW.Text) !=
0)
MessageBox.Show("Your
Password should be the same as Confirm Password.\nThank you.");
return;
//make sure Username contains valid characters
boolbValid = IsUsernameValid(TbUN.Text);
if(bValid)
bSignUp =
true;
//disable textboxes
TbUN.IsEnabled =
false;
TbPW.IsEnabled =
false;
TbCPW.IsEnabled =
false;
TbEmail.IsEnabled =
false;
BtnSignUpSubmit.IsEnabled =
false;
title.Text =
"requesting...";
//make Post request top-server
//add parameters
stringdata =
"username="+TbUN.Text+"&Password="+TbPW.Text;
if(TbEmail.Text.Contains("@")
&& TbEmail.Text.Contains("."))
data +=
"&email="+ TbEmail.Text;
System.
UriURL =
newUri("http://www.iclips.co.za/RegisterUsernameAndPassword.php");
WebRequestwebRequest =
WebRequest.Create(URL);
webRequest.Method =
"POST";
webRequest.ContentType =
"application/x-www-form-urlencoded";
webRequest.ContentLength = data.Length;
//we first obtain an input stream to which to write the body of the HTTP POST
webRequest.BeginGetRequestStream((
IAsyncResultresult) =>
HttpWebRequestpreq = result.AsyncState
asHttpWebRequest;
if(preq !=
null)
StreampostStream = preq.EndGetRequestStream(result);
//guess one could just accept a byte[] [via function argument] for arbitrary data types - images, audio,...
byte[] dataStream =
Encoding.UTF8.GetBytes(data);
postStream.Write(dataStream, 0, dataStream.Length);
postStream.Close();
//we can then finalize the request...
preq.BeginGetResponse((
IAsyncResultfinal_result) =>
HttpWebRequestreq = final_result.AsyncState
asHttpWebRequest;
if(req !=
null)
try
//we call the success callback as long as we get a response stream
WebResponseresponse = req.EndGetResponse(final_result);
success_callback(response.GetResponseStream());
catch(WebExceptionwe)
//otherwise call the error/failure callback
error_callback(we.Message);
return;
}, preq);
}, URL);
privatevoiderror_callback(stringp)
if(bSignUp)
bSignUp =
false;
// Show error message
MessageBox.Show("Connection
Error!\n\n"+ p);
//enable input
//disable textboxes
TbUN.IsEnabled =
true;
TbPW.IsEnabled =
true;
TbCPW.IsEnabled =
true;
TbEmail.IsEnabled =
true;
BtnSignUpSubmit.IsEnabled =
false;
title.Text =
"try again";
privatevoidsuccess_callback(Streamstream)
if(bSignUp)
bSignUp =
false;
// Open the stream using a StreamReader for easy access.
StreamReaderreader =
newStreamReader(stream);
// Read the content.
stringresponse = reader.ReadToEnd();
// Display the content.
MessageBox.Show(response);
// Clean up the streams.
reader.Close();// Directives
using System;
using System.Collections.Generic;
using System.Linq;
using System.Net;
using System.Windows;
using System.Windows.Controls;
using System.Windows.Navigation;
using Microsoft.Phone.Controls;
using Microsoft.Phone.Shell;
using iClips.Resources;
using System.ComponentModel;
using System.Threading;
using System.IO;
using System.IO.IsolatedStorage;
using Microsoft.Devices;
using System.Windows.Media;
using Microsoft.Xna.Framework.Media;
using System.Windows.Media.Imaging;
using System.Threading.Tasks;
using System.Text;
using Windows.Storage;
using System.Windows.Threading;
using System.Diagnostics;
using System.Globalization;
namespace iClips
public partial class MainPage : PhoneApplicationPage
Boolean bSignUp;
HyperlinkButton BtnSignIn, BtnSignUp, BtnSignUpSubmit;
TextBox TbUN, TbPW, TbCPW, TbEmail;
TextBlock un, title;
System.DateTime startTime;
// Viewfinder for capturing video.
private VideoBrush videoRecorderBrush;
// Source and device for capturing video.
private CaptureSource captureSource;
private CaptureDevice vcDevice;
double w, h;
// File details for storing the recording.
private IsolatedStorageFileStream isoVideoFile;
private FileSink fileSink;
private string isoVideoFileName = "CameraMovie.mp4";
// For managing button and application state.
private enum ButtonState { Initialized, Stopped, Ready, Recording, Playback, Paused, NoChange, CameraNotSupported };
private ButtonState currentAppState;
//create reference to SocketClient
SocketClient sock = new SocketClient();
// Constructor
public MainPage()
InitializeComponent();
//setup recording
// Prepare ApplicationBar and buttons.
PhoneAppBar = (ApplicationBar)ApplicationBar;
PhoneAppBar.IsVisible = true;
StartRecording = ((ApplicationBarIconButton)ApplicationBar.Buttons[0]);
StopPlaybackRecording = ((ApplicationBarIconButton)ApplicationBar.Buttons[1]);
StartPlayback = ((ApplicationBarIconButton)ApplicationBar.Buttons[2]);
PausePlayback = ((ApplicationBarIconButton)ApplicationBar.Buttons[3]);
//display a welcome message
txtDebug.Text = "Welcome to iClips.";
string result = sock.Connect("197.189.214.116", 5000);
txtOutput.Text = result;
if(result.Contains("success")){
sock.Send("#testing_");
SetScreenResolution();
//set image on load friends
/*Uri uri = new Uri("/Assets/home_icons/myFriends.png", UriKind.Relative);
BitmapImage imgSource = new BitmapImage(uri);
Image image = new Image();
image.Source = imgSource;
load_friends.Content = image;*/
SignIn();
private void SignIn()
// remove all elements inside sign grid
for (int index = MyGrid.Children.Count - 1; index >= 0; index--)
MyGrid.Children.RemoveAt(index);
BtnSignIn = new HyperlinkButton();
BtnSignIn.Content = "<< Sign In >>";
BtnSignIn.Click += new RoutedEventHandler(SignIn_Tab);
BtnSignIn.VerticalAlignment = VerticalAlignment.Bottom;
BtnSignUp = new HyperlinkButton();
BtnSignUp.Content = "<< I'm new here. Sign Up. >>";
BtnSignUp.Click += new RoutedEventHandler(SignUp_Tab);
BtnSignUp.VerticalAlignment = VerticalAlignment.Bottom;
un = new TextBlock();
un.Text = "Enter your Username:";
un.VerticalAlignment = VerticalAlignment.Bottom;
un.HorizontalAlignment = HorizontalAlignment.Center;
TextBlock pw = new TextBlock();
pw.Text = "Enter your Password:";
pw.VerticalAlignment = VerticalAlignment.Bottom;
pw.HorizontalAlignment = HorizontalAlignment.Center;
//setup username textbox
TbUN = new TextBox();
TbUN.Opacity = 0.5;
TbUN.Text = "";
TbUN.FontSize = 16;
TbUN.FontWeight = FontWeights.ExtraBold;
TbUN.Foreground = new SolidColorBrush(Colors.Black);
TbUN.Background = new SolidColorBrush(Colors.Transparent);
TbUN.VerticalAlignment = VerticalAlignment.Top;
TbUN.Height = 70;
TbUN.Tap += TbUN_Tap;
//setup password textbox
TbPW = new TextBox();
TbPW.Opacity = 0.5;
TbPW.Text = "";
TbPW.FontSize = 16;
TbPW.FontWeight = FontWeights.ExtraBold;
TbPW.Foreground = new SolidColorBrush(Colors.Black);
TbPW.Background = new SolidColorBrush(Colors.Transparent);
TbPW.VerticalAlignment = VerticalAlignment.Top;
TbPW.Height = 70;
TbPW.Tap += TbPW_Tap;
//Show the background color of MyGrid
MyGrid.Background = new SolidColorBrush(Colors.Blue);
// Create Row for Username Textblock
RowDefinition gridRow0 = new RowDefinition();
gridRow0.Height = new GridLength(60);
MyGrid.RowDefinitions.Add(gridRow0);
// Create Row for Username
RowDefinition gridRow1 = new RowDefinition();
gridRow1.Height = new GridLength(60);
MyGrid.RowDefinitions.Add(gridRow1);
//create row for password Textblock
RowDefinition gridRow2a = new RowDefinition();
gridRow2a.Height = new GridLength(60);
MyGrid.RowDefinitions.Add(gridRow2a);
//create row for password
RowDefinition gridRow2 = new RowDefinition();
gridRow2.Height = new GridLength(60);
MyGrid.RowDefinitions.Add(gridRow2);
//create row for << Sign In >>
RowDefinition gridRow3 = new RowDefinition();
gridRow3.Height = new GridLength(60);
MyGrid.RowDefinitions.Add(gridRow3);
//create row for << Sign Up >>
RowDefinition gridRow4 = new RowDefinition();
gridRow4.Height = new GridLength(120);
MyGrid.RowDefinitions.Add(gridRow4);
Grid.SetRow(un, 0);
Grid.SetColumn(un, 0);
Grid.SetRow(TbUN, 1);
Grid.SetColumn(TbUN, 0);
Grid.SetRow(pw, 2);
Grid.SetColumn(pw, 0);
Grid.SetRow(TbPW, 3);
Grid.SetColumn(TbPW, 0);
Grid.SetRow(BtnSignIn, 4);
Grid.SetColumn(BtnSignIn, 0);
Grid.SetRow(BtnSignUp, 5);
Grid.SetColumn(BtnSignUp, 0);
MyGrid.Children.Add(un);
MyGrid.Children.Add(TbUN);
MyGrid.Children.Add(pw);
MyGrid.Children.Add(TbPW);
MyGrid.Children.Add(BtnSignIn);
MyGrid.Children.Add(BtnSignUp);
private void SignUp_Tab(object sender, RoutedEventArgs e)
MessageBox.Show("Welcome to Sign up.\n\nYou need 3 things to create an account:\n1. A unique Case-Sensitive Username. ex 'iClips' is not the same as 'Iclips'\n2. A password to secure you account. \n3. A profile photo for easy recognition.\nThank you.");
// remove all elements inside sign grid
for (int index = MyGrid.Children.Count - 1; index >= 0; index--)
MyGrid.Children.RemoveAt(index);
//repopulate grid with Sign Up elements
//create title
title = new TextBlock();
title.Text = "--- Sign Up 1/2 ---";
title.VerticalAlignment = VerticalAlignment.Top;
title.HorizontalAlignment = HorizontalAlignment.Center;
//field for Username
TbUN = new TextBox();
TbUN.Opacity = 0.5;
TbUN.Text = "Username";
TbUN.FontSize = 16;
TbUN.FontWeight = FontWeights.ExtraBold;
TbUN.Foreground = new SolidColorBrush(Colors.Black);
TbUN.Background = new SolidColorBrush(Colors.Transparent);
TbUN.VerticalAlignment = VerticalAlignment.Top;
TbUN.Height = 70;
TbUN.Tap += TbUN_Tap;
//field for Password
TbPW = new TextBox();
TbPW.Opacity = 0.5;
TbPW.Text = "Password";
TbPW.FontSize = 16;
TbPW.FontWeight = FontWeights.ExtraBold;
TbPW.Foreground = new SolidColorBrush(Colors.Black);
TbPW.Background = new SolidColorBrush(Colors.Transparent);
TbPW.VerticalAlignment = VerticalAlignment.Top;
TbPW.Height = 70;
TbPW.Tap += TbPW_Tap;
//field Confirm for Password
TbCPW = new TextBox();
TbCPW.Opacity = 0.5;
TbCPW.Text = "Confirm Password";
TbCPW.FontSize = 16;
TbCPW.FontWeight = FontWeights.ExtraBold;
TbCPW.Foreground = new SolidColorBrush(Colors.Black);
TbCPW.Background = new SolidColorBrush(Colors.Transparent);
TbCPW.VerticalAlignment = VerticalAlignment.Top;
TbCPW.Height = 70;
TbCPW.Tap += TbCPW_Tap;
//field for Optional Email
TbEmail = new TextBox();
TbEmail.Opacity = 0.5;
TbEmail.Text = "Email (Optional)";
TbEmail.FontSize = 16;
TbEmail.FontWeight = FontWeights.ExtraBold;
TbEmail.Foreground = new SolidColorBrush(Colors.Black);
TbEmail.Background = new SolidColorBrush(Colors.Transparent);
TbEmail.VerticalAlignment = VerticalAlignment.Top;
TbEmail.Height = 70;
TbEmail.Tap += TbEmail_Tap;
HyperlinkButton BtnGoBack = new HyperlinkButton();
BtnGoBack.Content = "<< Go Back ";
BtnGoBack.Click += new RoutedEventHandler(BtnGoBack_Tab);
BtnGoBack.VerticalAlignment = VerticalAlignment.Bottom;
BtnSignUpSubmit = new HyperlinkButton();
BtnSignUpSubmit.Content = "<< Sign Up >>";
BtnSignUpSubmit.Click += new RoutedEventHandler(BtnSignUpSubmit_Tab);
BtnSignUpSubmit.VerticalAlignment = VerticalAlignment.Bottom;
// Create Row for title
RowDefinition gridRow0 = new RowDefinition();
gridRow0.Height = new GridLength(60);
MyGrid.RowDefinitions.Add(gridRow0);
// Create Row for Username
RowDefinition gridRow1 = new RowDefinition();
gridRow1.Height = new GridLength(60);
MyGrid.RowDefinitions.Add(gridRow1);
//create row for password Textblock
RowDefinition gridRow2a = new RowDefinition();
gridRow2a.Height = new GridLength(60);
MyGrid.RowDefinitions.Add(gridRow2a);
//create row for Confirm password
RowDefinition gridRow2 = new RowDefinition();
gridRow2.Height = new GridLength(60);
MyGrid.RowDefinitions.Add(gridRow2);
//create row for email
RowDefinition gridRow3 = new RowDefinition();
gridRow3.Height = new GridLength(60);
MyGrid.RowDefinitions.Add(gridRow3);
//create row for << Sign Up >>
RowDefinition gridRow4 = new RowDefinition();
gridRow4.Height = new GridLength(120);
MyGrid.RowDefinitions.Add(gridRow4);
//create row for << Go Back >>
RowDefinition gridRow5 = new RowDefinition();
gridRow5.Height = new GridLength(120);
MyGrid.RowDefinitions.Add(gridRow5);
Grid.SetRow(title, 0);
Grid.SetColumn(title, 0);
Grid.SetRow(TbUN, 1);
Grid.SetColumn(TbUN, 0);
Grid.SetRow(TbPW, 2);
Grid.SetColumn(TbPW, 0);
Grid.SetRow(TbCPW, 3);
Grid.SetColumn(TbCPW, 0);
Grid.SetRow(TbEmail, 4);
Grid.SetColumn(TbEmail, 0);
Grid.SetRow(BtnSignUpSubmit, 5);
Grid.SetColumn(BtnSignUpSubmit, 0);
Grid.SetRow(BtnGoBack, 6);
Grid.SetColumn(BtnGoBack, 0);
MyGrid.Children.Add(title);
MyGrid.Children.Add(TbUN);
MyGrid.Children.Add(TbPW);
MyGrid.Children.Add(TbCPW);
MyGrid.Children.Add(TbEmail);
MyGrid.Children.Add(BtnSignUpSubmit);
MyGrid.Children.Add(BtnGoBack);
BtnSignUp.Content = "<< Sign Up >>";
private bool IsUsernameValid(string str)
int d;
if (str.Length > 30)
MessageBox.Show("You may only use a maximum of 30 characters for your Username.\nThank you.");
return false;
for (d = 0; d < str.Length; d++)
if (str.Contains("~") || str.Contains("!") || str.Contains("@") || str.Contains("$")
|| str.Contains("#") || str.Contains("%") || str.Contains("|") || str.Contains("_"))
MessageBox.Show("Your Username may not contain any of the follwing characters: \n~ ! @ # $ % | _\nThank you.");
return false;
return true;
private void BtnSignUpSubmit_Tab(object sender, RoutedEventArgs e)
//show error if Username == Username
if (TbUN.Text.ToString() == "Username")
MessageBox.Show("You must fill in your Username in the Username textbox.\nThank you.");
return;
//make sure all fields are filled in
if (TbUN.Text.ToString() == "" || TbPW.Text.ToString() == "" || TbCPW.Text.ToString() == "")
MessageBox.Show("All fields must be filled in.\nThank you.");
return;
//make sure Password is the same as Confirm Password
if (TbPW.Text.CompareTo(TbCPW.Text) != 0)
MessageBox.Show("Your Password should be the same as Confirm Password.\nThank you.");
return;
//make sure Username contains valid characters
bool bValid = IsUsernameValid(TbUN.Text);
if (bValid)
bSignUp = true;
//disable textboxes
TbUN.IsEnabled = false;
TbPW.IsEnabled = false;
TbCPW.IsEnabled = false;
TbEmail.IsEnabled = false;
BtnSignUpSubmit.IsEnabled = false;
title.Text = "requesting...";
//make Post request top-server
//add parameters
string data = "username="+TbUN.Text+"&Password="+TbPW.Text;
if(TbEmail.Text.Contains("@") && TbEmail.Text.Contains("."))
data += "&email=" + TbEmail.Text;
System.Uri URL = new Uri("http://www.iclips.co.za/RegisterUsernameAndPassword.php");
WebRequest webRequest = WebRequest.Create(URL);
webRequest.Method = "POST";
webRequest.ContentType = "application/x-www-form-urlencoded";
webRequest.ContentLength = data.Length;
//we first obtain an input stream to which to write the body of the HTTP POST
webRequest.BeginGetRequestStream((IAsyncResult result) =>
HttpWebRequest preq = result.AsyncState as HttpWebRequest;
if (preq != null)
Stream postStream = preq.EndGetRequestStream(result);
//guess one could just accept a byte[] [via function argument] for arbitrary data types - images, audio,...
byte[] dataStream = Encoding.UTF8.GetBytes(data);
postStream.Write(dataStream, 0, dataStream.Length);
postStream.Close();
//we can then finalize the request...
preq.BeginGetResponse((IAsyncResult final_result) =>
HttpWebRequest req = final_result.AsyncState as HttpWebRequest;
if (req != null)
try
//we call the success callback as long as we get a response stream
WebResponse response = req.EndGetResponse(final_result);
success_callback(response.GetResponseStream());
catch (WebException we)
//otherwise call the error/failure callback
error_callback(we.Message);
return;
}, preq);
}, URL);
private void error_callback(string p)
if (bSignUp)
bSignUp = false;
// Show error message
MessageBox.Show("Connection Error!\n\n" + p);
//enable input
//disable textboxes
TbUN.IsEnabled = true;
TbPW.IsEnabled = true;
TbCPW.IsEnabled = true;
TbEmail.IsEnabled = true;
BtnSignUpSubmit.IsEnabled = false;
title.Text = "try again";
private void success_callback(Stream stream)
if (bSignUp)
bSignUp = false;
// Open the stream using a StreamReader for easy access.
StreamReader reader = new StreamReader(stream);
// Read the content.
string response = reader.ReadToEnd();
// Display the content.
MessageBox.Show(response);
// Clean up the streams.
reader.Close();
private void BtnGoBack_Tab(object sender, RoutedEventArgs e)
SignIn();
private void TbEmail_Tap(object sender, System.Windows.Input.GestureEventArgs e)
TbEmail.SelectAll();
private void TbCPW_Tap(object sender, System.Windows.Input.GestureEventArgs e)
TbCPW.SelectAll();
private void SignIn_Tab(object sender, RoutedEventArgs e)
if (TbUN.Text.ToString() == "" || TbPW.Text.ToString() == "")
MessageBox.Show("Your Username or Password cannot be empty.\nThank you.");
return;
private void TbUN_Tap(object sender, System.Windows.Input.GestureEventArgs e)
TbUN.SelectAll();
un.Text = "Usernames are Case-Sensitive.\n'Iclips' is not the same as 'iClips'.";
private void TbPW_Tap(object sender, System.Windows.Input.GestureEventArgs e)
TbPW.SelectAll();
protected override void OnNavigatedTo(NavigationEventArgs e)
base.OnNavigatedTo(e);
// Initialize the video recorder.
InitializeVideoRecorder();
CameraButtons.ShutterKeyHalfPressed += OnButtonHalfPress;
// The event is fired when the shutter button receives a full press.
CameraButtons.ShutterKeyPressed += OnButtonFullPress;
// The event is fired when the shutter button is released.
CameraButtons.ShutterKeyReleased += OnButtonRelease;
protected override void OnNavigatedFrom(NavigationEventArgs e)
// Dispose of camera and media objects.
DisposeVideoPlayer();
DisposeVideoRecorder();
base.OnNavigatedFrom(e);
CameraButtons.ShutterKeyHalfPressed -= OnButtonHalfPress;
CameraButtons.ShutterKeyPressed -= OnButtonFullPress;
CameraButtons.ShutterKeyReleased -= OnButtonRelease;
// Ensure that the viewfinder is upright in LandscapeRight.
protected override void OnOrientationChanged(OrientationChangedEventArgs e)
if (vcDevice != null)
if (e.Orientation == PageOrientation.LandscapeLeft)
txtDebug.Text = "LandscapeLeft";
videoRecorderBrush.RelativeTransform =
new CompositeTransform() { CenterX = 0.5, CenterY = 0.5, Rotation = 90 };
//rotate logo
if (logo != null)
RotateTransform rt = new RotateTransform();
rt.Angle = 90;
//default rotation is around top left corner of the control,
//but you sometimes want to rotate around the center of the control
//to do that, you need to set the RenderTransFormOrigin
//of the item you're going to rotate
//I did not test this approach, maybe You're going to need to use actual coordinates
//so this bit is for information purposes only
logo.RenderTransformOrigin = new Point(0.5, 0.5);
logo.RenderTransform = rt;
//rotate sign in link
if (MyGrid != null)
RotateTransform rt = new RotateTransform();
rt.Angle = 90;
//default rotation is around top left corner of the control,
//but you sometimes want to rotate around the center of the control
//to do that, you need to set the RenderTransFormOrigin
//of the item you're going to rotate
//I did not test this approach, maybe You're going to need to use actual coordinates
//so this bit is for information purposes only
MyGrid.RenderTransformOrigin = new Point(0.5, 0.5);
MyGrid.RenderTransform = rt;
if (e.Orientation == PageOrientation.PortraitUp)
txtDebug.Text = "PortraitUp";
videoRecorderBrush.RelativeTransform =
new CompositeTransform() { CenterX = 0.5, CenterY = 0.5, Rotation = 0 };
//rotate logo
if (logo != null)
RotateTransform rt = new RotateTransform();
rt.Angle = 0;
//default rotation is around top left corner of the control,
//but you sometimes want to rotate around the center of the control
//to do that, you need to set the RenderTransFormOrigin
//of the item you're going to rotate
//I did not test this approach, maybe You're going to need to use actual coordinates
//so this bit is for information purposes only
logo.RenderTransformOrigin = new Point(0.5, 0.5);
logo.RenderTransform = rt;
//rotate sign in link
if (MyGrid != null)
RotateTransform rt = new RotateTransform();
rt.Angle = 0;
//default rotation is around top left corner of the control,
//but you sometimes want to rotate around the center of the control
//to do that, you need to set the RenderTransFormOrigin
//of the item you're going to rotate
//I did not test this approach, maybe You're going to need to use actual coordinates
//so this bit is for information purposes only
MyGrid.RenderTransformOrigin = new Point(0.5, 0.5);
MyGrid.RenderTransform = rt;
if (e.Orientation == PageOrientation.LandscapeRight)
txtDebug.Text = "LandscapeRight";
// Rotate for LandscapeRight orientation.
//videoRecorderBrush.RelativeTransform =
//new CompositeTransform() { CenterX = 0.5, CenterY = 0.5, Rotation = 180 };
//rotate logo
if (logo != null)
RotateTransform rt = new RotateTransform();
rt.Angle = -90;
//default rotation is around top left corner of the control,
//but you sometimes want to rotate around the center of the control
//to do that, you need to set the RenderTransFormOrigin
//of the item you're going to rotate
//I did not test this approach, maybe You're going to need to use actual coordinates
//so this bit is for information purposes only
logo.RenderTransformOrigin = new Point(0.5, 0.5);
logo.RenderTransform = rt;
//rotate sign in link
if (MyGrid != null)
RotateTransform rt = new RotateTransform();
rt.Angle = -90;
//default rotation is around top left corner of the control,
//but you sometimes want to rotate around the center of the control
//to do that, you need to set the RenderTransFormOrigin
//of the item you're going to rotate
//I did not test this approach, maybe You're going to need to use actual coordinates
//so this bit is for information purposes only
MyGrid.RenderTransformOrigin = new Point(0.5, 0.5);
MyGrid.RenderTransform = rt;
if (e.Orientation == PageOrientation.PortraitDown)
txtDebug.Text = "PortraitDown";
videoRecorderBrush.RelativeTransform =
new CompositeTransform() { CenterX = 0.5, CenterY = 0.5, Rotation = 270 };
// Provide auto-focus with a half button press using the hardware shutter button.
private void OnButtonHalfPress(object sender, EventArgs e)
// Focus when a capture is not in progress.
try
this.Dispatcher.BeginInvoke(delegate()
txtDebug.Text = "Half Button Press: Auto Focus";
catch (Exception focusError)
// Cannot focus when a capture is in progress.
this.Dispatcher.BeginInvoke(delegate()
txtDebug.Text = focusError.Message;
// Capture the image with a full button press using the hardware shutter button.
private void OnButtonFullPress(object sender, EventArgs e)
// Focus when a capture is not in progress.
try
this.Dispatcher.BeginInvoke(delegate()
txtDebug.Text = "Full Button Press: Auto Focus";
catch (Exception focusError)
// Cannot focus when a capture is in progress.
this.Dispatcher.BeginInvoke(delegate()
txtDebug.Text = focusError.Message;
// Cancel the focus if the half button press is released using the hardware shutter button.
private void OnButtonRelease(object sender, EventArgs e)
try
this.Dispatcher.BeginInvoke(delegate()
txtDebug.Text = "Shutter is released: Auto Focus";
catch (Exception focusError)
// Cannot focus when a capture is in progress.
this.Dispatcher.BeginInvoke(delegate()
txtDebug.Text = focusError.Message;
// Update the buttons and text on the UI thread based on app state.
private void UpdateUI(ButtonState currentButtonState, string statusMessage)
// Run code on the UI thread.
Dispatcher.BeginInvoke(delegate
switch (currentButtonState)
// When the camera is not supported by the phone.
case ButtonState.CameraNotSupported:
StartRecording.IsEnabled = false;
StopPlaybackRecording.IsEnabled = false;
StartPlayback.IsEnabled = false;
PausePlayback.IsEnabled = false;
break;
// First launch of the application, so no video is available.
case ButtonState.Initialized:
StartRecording.IsEnabled = true;
StopPlaybackRecording.IsEnabled = false;
StartPlayback.IsEnabled = false;
PausePlayback.IsEnabled = false;
break;
// Ready to record, so video is available for viewing.
case ButtonState.Ready:
StartRecording.IsEnabled = true;
StopPlaybackRecording.IsEnabled = false;
StartPlayback.IsEnabled = true;
PausePlayback.IsEnabled = false;
break;
// Video recording is in progress.
case ButtonState.Recording:
StartRecording.IsEnabled = false;
StopPlaybackRecording.IsEnabled = true;
StartPlayback.IsEnabled = false;
PausePlayback.IsEnabled = false;
break;
// Video playback is in progress.
case ButtonState.Playback:
StartRecording.IsEnabled = false;
StopPlaybackRecording.IsEnabled = true;
StartPlayback.IsEnabled = false;
PausePlayback.IsEnabled = true;
break;
// Video playback has been paused.
case ButtonState.Paused:
StartRecording.IsEnabled = false;
StopPlaybackRecording.IsEnabled = true;
StartPlayback.IsEnabled = true;
PausePlayback.IsEnabled = false;
break;
default:
break;
// Display a message.
txtDebug.Text = statusMessage;
// Note the current application state.
currentAppState = currentButtonState;
public void InitializeVideoRecorder()
if (captureSource == null)
// Create the VideoRecorder objects.
captureSource = new CaptureSource();
fileSink = new FileSink();
vcDevice = CaptureDeviceConfiguration.GetDefaultVideoCaptureDevice();
// Add eventhandlers for captureSource.
captureSource.CaptureFailed += new EventHandler<ExceptionRoutedEventArgs>(OnCaptureFailed);
// Initialize the camera if it exists on the phone.
if (vcDevice != null)
// Create the VideoBrush for the viewfinder.
videoRecorderBrush = new VideoBrush();
videoRecorderBrush.SetSource(captureSource);
// Display the viewfinder image on the rectangle.
viewfinderRectangle.Fill = videoRecorderBrush;
// Start video capture and display it on the viewfinder.
captureSource.Start();
// Set the button state and the message.
UpdateUI(ButtonState.Initialized, "Tap record to start recording...");
else
// Disable buttons when the camera is not supported by the phone.
UpdateUI(ButtonState.CameraNotSupported, "A camera is not supported on this phone.");
// Set recording state: start recording.
private void StartVideoRecording()
try
// Connect fileSink to captureSource.
if (captureSource.VideoCaptureDevice != null
&& captureSource.State == CaptureState.Started)
captureSource.Stop();
// Connect the input and output of fileSink.
fileSink.CaptureSource = captureSource;
fileSink.IsolatedStorageFileName = isoVideoFileName;
// Begin recording.
if (captureSource.VideoCaptureDevice != null
&& captureSource.State == CaptureState.Stopped)
captureSource.Start();
// Set the button states and the message.
UpdateUI(ButtonState.Recording, "Recording...");
StartTimer();
// If recording fails, display an error.
catch (Exception e)
this.Dispatcher.BeginInvoke(delegate()
txtDebug.Text = "ERROR: " + e.Message.ToString();
//start the timer
private void StartTimer()
dispatcherTimer = new System.Windows.Threading.DispatcherTimer();
dispatcherTimer.Tick += new EventHandler(dispatcherTimer_Tick);
dispatcherTimer.Interval = new TimeSpan(0, 0, 1);
dispatcherTimer.Start();
startTime = System.DateTime.Now;
private void StopTimer()
dispatcherTimer.Stop();
private void dispatcherTimer_Tick(object sender, EventArgs e)
System.DateTime now = System.DateTime.Now;
txtRecTime.Text = now.Subtract(startTime).ToString();
// Set the recording state: stop recording.
private void StopVideoRecording()
try
// Stop recording.
if (captureSource.VideoCaptureDevice != null
&& captureSource.State == CaptureState.Started)
captureSource.Stop();
// Disconnect fileSink.
fileSink.CaptureSource = null;
fileSink.IsolatedStorageFileName = null;
// Set the button states and the message.
UpdateUI(ButtonState.Stopped, "Preparing viewfinder...");
StopTimer();
StartVideoPreview();
// If stop fails, display an error.
catch (Exception e)
this.Dispatcher.BeginInvoke(delegate()
txtDebug.Text = "ERROR: " + e.Message.ToString();
// Set the recording state: display the video on the viewfinder.
private void StartVideoPreview()
try
// Display the video on the viewfinder.
if (captureSource.VideoCaptureDevice != null
&& captureSource.State == CaptureState.Stopped)
// Add captureSource to videoBrush.
videoRecorderBrush.SetSource(captureSource);
// Add videoBrush to the visual tree.
viewfinderRectangle.Fill = videoRecorderBrush;
captureSource.Start();
// Set the button states and the message.
UpdateUI(ButtonState.Ready, "Ready to record.");
// If preview fails, display an error.
catch (Exception e)
this.Dispatcher.BeginInvoke(delegate()
txtDebug.Text = "ERROR: " + e.Message.ToString();
// Start the video recording.
private void StartRecording_Click(object sender, EventArgs e)
// Avoid duplicate taps.
StartRecording.IsEnabled = false;
StartVideoRecording();
// Handle stop requests.
private void StopPlaybackRecording_Click(object sender, EventArgs e)
// Avoid duplicate taps.
StopPlaybackRecording.IsEnabled = false;
// Stop during video recording.
if (currentAppState == ButtonState.Recording)
StopVideoRecording();
// Set the button state and the message.
UpdateUI(ButtonState.NoChange, "Recording stopped.");
// Stop during video playback.
else
// Remove playback objects.
DisposeVideoPlayer();
StartVideoPreview();
// Set the button state and the message.
UpdateUI(ButtonState.NoChange, "Playback stopped.");
// Start video playback.
private void StartPlayback_Click(object sender, EventArgs e)
// Avoid duplicate taps.
StartPlayback.IsEnabled = false;
// Start video playback when the file stream exists.
if (isoVideoFile != null)
VideoPlayer.Play();
// Start the video for the first time.
else
// Stop the capture source.
captureSource.Stop();
// Remove VideoBrush from the tree.
viewfinderRectangle.Fill = null;
// Create the file stream and attach it to the MediaElement.
isoVideoFile = new IsolatedStorageFileStream(isoVideoFileName,
FileMode.Open, FileAccess.Read,
IsolatedStorageFile.GetUserStoreForApplication());
VideoPlayer.SetSource(isoVideoFile);
// Add an event handler for the end of playback.
VideoPlayer.MediaEnded += new RoutedEventHandler(VideoPlayerMediaEnded);
// Start video playback.
VideoPlayer.Play();
// Set the button state and the message.
UpdateUI(ButtonState.Playback, "Playback started.");
// Pause video playback.
private void PausePlayback_Click(object sender, EventArgs e)
// Avoid duplicate taps.
PausePlayback.IsEnabled = false;
// If mediaElement exists, pause playback.
if (VideoPlayer != null)
VideoPlayer.Pause();
// Set the button state and the message.
UpdateUI(ButtonState.Paused, "Playback paused.");
private void DisposeVideoPlayer()
if (VideoPlayer != null)
// Stop the VideoPlayer MediaElement.
VideoPlayer.Stop();
// Remove playback objects.
VideoPlayer.Source = null;
isoVideoFile = null;
// Remove the event handler.
VideoPlayer.MediaEnded -= VideoPlayerMediaEnded;
private void DisposeVideoRecorder()
if (captureSource != null)
// Stop captureSource if it is running.
if (captureSource.VideoCaptureDevice != null
&& captureSource.State == CaptureState.Started)
captureSource.Stop();
// Remove the event handler for captureSource.
captureSource.CaptureFailed -= OnCaptureFailed;
// Remove the video recording objects.
captureSource = null;
vcDevice = null;
fileSink = null;
videoRecorderBrush = null;
// If recording fails, display an error message.
private void OnCaptureFailed(object sender, ExceptionRoutedEventArgs e)
this.Dispatcher.BeginInvoke(delegate()
txtDebug.Text = "ERROR: " + e.ErrorException.Message.ToString();
// Display the viewfinder when playback ends.
public void VideoPlayerMediaEnded(object sender, RoutedEventArgs e)
// Remove the playback objects.
DisposeVideoPlayer();
StartVideoPreview();
public void SetScreenResolution()
w = Application.Current.Host.Content.ActualWidth;
h = Application.Current.Host.Content.ActualHeight;
setResViewF(w, h);
public void setResViewF(double width, double height)
viewfinderRectangle.Width = width;
viewfinderRectangle.Height = height;
resMI.Content = "resolution: " + width + "*" + height;
private void resMI_Click(object sender, RoutedEventArgs e)
switch (resMI.Content.ToString())
case "resolution: 176*220":
setResViewF(240, 320);
break;
case "resolution: 240*320":
setResViewF(360, 480);
break;
case "resolution: 360*480":
setResViewF(480, 800);
break;
case "resolution: 480*800":
setResViewF(1440, 720);
break;
case "resolution: 1440*720":
setResViewF(1920, 1080);
break;
case "resolution: 1920*1080":
setResViewF(176, 220);
break;
default:
setResViewF(176, 220);
break;
public void WriteToFile(string key, string value)
var Iso_settings = System.IO.IsolatedStorage.IsolatedStorageSettings.ApplicationSettings;
if (!Iso_settings.Contains(key))
Iso_settings.Add(key, value);
Iso_settings.Save();//This will save your data in isolated storage.
public string ReadFromFile(string key)
var Iso_settings = System.IO.IsolatedStorage.IsolatedStorageSettings.ApplicationSettings;
if (Iso_settings.Contains(key))
return (string)Iso_settings[key];
else
return null;
public DispatcherTimer dispatcherTimer { get; set; }
private void ToggleZoom(MediaElement media)
if (media.Stretch != Stretch.UniformToFill)
// zoom
media.Stretch = Stretch.UniformToFill;
else
// unzoom
media.Stretch = Stretch.Uniform;
BtnSignUpSubmit_Tab is the HyperLinkButton that would trigger the web request process. I need this code to work perfectly because a lot of people will use this. If you can simplify the http web request that already feels so good. Thank you. -
How can I sync my iphone to a new computer? My phone is the only source of my phone and itunes data.
I would like to use my iphone to instal and restorel all my phone data to a new computer. I lost the back up of my old computer itunes data. How can this be done?
Syncing to a new iTunes library or computer will erase your iPhone. Only if you back up your phone manually before syncing, you can restore your device from that backup again. A manual backup does not include the sync process.
Do this to back up manually:
Disable autosync in iTunes, connect your phone to your new computer and right click on it in the device list and choose backup. iTunes will backup your device without syncing.
Transfer your purchases the same way, choosing "transfer purchases" this time.
When you connect your phone for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the phone for the first time.
Music is one way only, from the computer to your device, unless you bought the songs in itunes and transferred your purchases.
There is 3rd party software out there, but not supported by Apple, see this thread: http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0
About backups and what's saved: iTunes: About iOS backups
How to back up and restore:http://support.apple.com/kb/HT1414
How to download apps for free again:http://support.apple.com/kb/HT2519
Saving other data is also described here. How to back up your data and set up as a new device -
Re: [SunONE-JATO] Re: Using an object to store and display data
Personally, I think there is little or no value to creating a "domain"
object that itself relies on a JATO QueryModel internally, but hides that
fact and requires use of BeanAdapterModel.
It would be more appropriate (and much less work, and more scalable) to just
derive a QueryModel subclass and add the domain-specific behavior to the
model. In other words, what's the point of creating an object that hides
JATO inside it when you're running in JATO to begin with? Now if the domain
object were doing plain JDBC, and thus trying to be JATO independent, that
would be different. However, you could still implement the Model interface
on the object (or use BeanAdapterModel) to integrate it seamlessly with the
View tier.
Todd
----- Original Message -----
From: "grschroeder" <grschroeder@y...>
Sent: Wednesday, July 31, 2002 12:00 PM
Subject: [SunONE-JATO] Re: Using an object to store and display data
Craig,
I think it all finally makes sense. First, your assumption is
correct regarding the process flow. The ViewBean will interact with
a custom Javabean which will then in turn interact with a SQL Model
to access the database. So now let me make sure I understand what I
need to do. Basically the custom Javabean will have a method to get
the SQLModel. I would then invoke the setValue method on the
SQLModel and call the appropriate execute method( e.g.,
executeUpdate, etc. ) just like I would do from a ViewBean. Does
this sound correct?
Thanks,
Greg
--- In SunONE-JATO@y..., "Craig V. Conover" <craig.conover@s...>
wrote:
Greg,
see below...
grschroeder wrote:
Thanks for the help Craig. I looked at the sample code that makes
use of the BeanAdapterModel. Basically it looks like it allows a
view to interact with a bean the same way it would interact with
any
other model. That part I think I understand.
This is correct.
The part I'm a little
unclear on still is how to interface this BeanAdapterModel( which
is
a very basic model ) that I now have with a query model toactually
interact with the database.
Not sure what you mean by "interface this BeanAdapterModel ... witha
query model". Does this mean that you have a ViewBean the interactswith
a custom JavaBean via the BeanAdpterModel wrapper, and from the
JavaBean you are interacting with the SQL Model?
So it looks like this: ViewBean > BeanAdapterModel(Custom JavaBean)
SQL Model > RDBMS
That's what I am reading anyway. Please explain this to me.
Would I need to make direct JDBC calls
from my custom model instead of letting JATO dynamically create
the
calls for me?
If my assumptions above are correct, then the custom JavaBean cansimply
use the SQL Model in exactly the same manner as the ViewBean,otherwise,
if no SQL Model is involved, then yes, you need to handle JDBCdirectly,
which is fine, if you do it "right" (connection pooling, result set
handling, etc.).
Thanks,
Greg
--- In SunONE-JATO@y..., "Craig V. Conover" <craig.conover@s...>
wrote:
I think the best approach would be to treat your Domain Objects
(DO) as
the Database (the enterprise tier) from JATO's perspective. You
could
create custom models that interface with our DO's and then the
JATO
Views could easily bind to the custom DO models just like anyother
model. This should eliminate the need for pushing data/objectsfrom
>
view
to model to database.
There is a JATO class called BeanAdapterModel that might be just
what
you need, however, I am not experienced with using it. Maybe
someone
else on my team or in the community could better explain how to
use
>
this
class.
craig
grschroeder wrote:
Venki,
Thanks for the response. Actually, I'm not sure if I can answer
all
of your questions because those are some of the same questions
that
we're trying to answer ourselves. Basically, what we're trying
to
>do
is incorporate our domain object model into the JATO framework.
My
thinking was that one way we could accomplish this was by
storing
>a
Javabean object in the HTTPSession to represent an object in the
domain model, and that the Viewbean and JATO Model could get and
set
data from there. If you have a better suggestion of how to
accomplish this, I'm definitely open to hearing it.
Thanks,
Greg
--- In SunONE-JATO@y..., Venki <heyvenki@y...> wrote:
OK grschroeder , first let me get this straight:
0. Are you going to pass this object to the model, or are u
going
>
to pass the session object to the model?
1. Is there any specific reason for this approach you are
taking?
2. Will there be a notification from the object u havementioned
>to
have the model persist the data?
3. What about the reverse case, when the model refreshes the
data,
how are you going to refresh you object?
4. The JavaBean Object that u are talking about, is it your own
object or is it implementation of an existing JATO interface?
~Venki
grschroeder wrote:I'm fairly new to JATO, but I think I now
have
>a
basic understanding
of how Viewbeans and Models interact. However, I want to
incorporate
the use of a Javabean object that will be stored in the HTTP
session
and will act as the connection between the Viewbean and Model
instead
of having the Viewbean and Model interact directly with each
other.
Basically I would like to have the Model set data in the object
stored in the session so that the Viewbean can pull it out to
display
it. And vice versa, once the user modifies the data and is
ready
>
to
persist it, I would like to have the Viewbean set data in the
object
stored in the session so that the Model can pull it out to
store
>it
in the database. I'm not sure what the best approach would be
to
accomplish this. Any help you could give would be greatly
appreciated.
Thanks,
Greg
To download the latest version of JATO, please visit:
http://www.sun.com/software/download/developer/5102.html
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp
Service.
Venki
IT Solutions
#6, Pycrofts Garden Road, Nugambakkam, Chennai - 600 006
91-44-4925740(Home) 91-44-8212877(Work)
* Luck is what happens when Preparation meets Opportunity.
To download the latest version of JATO, please visit:
http://www.sun.com/software/download/developer/5102.html
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp
>To download the latest version of JATO, please visit:
http://www.sun.com/software/download/developer/5102.html
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp
To download the latest version of JATO, please visit:
http://www.sun.com/software/download/developer/5102.html
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jspPersonally, I think there is little or no value to creating a "domain"
object that itself relies on a JATO QueryModel internally, but hides that
fact and requires use of BeanAdapterModel.
It would be more appropriate (and much less work, and more scalable) to just
derive a QueryModel subclass and add the domain-specific behavior to the
model. In other words, what's the point of creating an object that hides
JATO inside it when you're running in JATO to begin with? Now if the domain
object were doing plain JDBC, and thus trying to be JATO independent, that
would be different. However, you could still implement the Model interface
on the object (or use BeanAdapterModel) to integrate it seamlessly with the
View tier.
Todd
----- Original Message -----
From: "grschroeder" <grschroeder@y...>
Sent: Wednesday, July 31, 2002 12:00 PM
Subject: [SunONE-JATO] Re: Using an object to store and display data
Craig,
I think it all finally makes sense. First, your assumption is
correct regarding the process flow. The ViewBean will interact with
a custom Javabean which will then in turn interact with a SQL Model
to access the database. So now let me make sure I understand what I
need to do. Basically the custom Javabean will have a method to get
the SQLModel. I would then invoke the setValue method on the
SQLModel and call the appropriate execute method( e.g.,
executeUpdate, etc. ) just like I would do from a ViewBean. Does
this sound correct?
Thanks,
Greg
--- In SunONE-JATO@y..., "Craig V. Conover" <craig.conover@s...>
wrote:
Greg,
see below...
grschroeder wrote:
Thanks for the help Craig. I looked at the sample code that makes
use of the BeanAdapterModel. Basically it looks like it allows a
view to interact with a bean the same way it would interact with
any
other model. That part I think I understand.
This is correct.
The part I'm a little
unclear on still is how to interface this BeanAdapterModel( which
is
a very basic model ) that I now have with a query model toactually
interact with the database.
Not sure what you mean by "interface this BeanAdapterModel ... witha
query model". Does this mean that you have a ViewBean the interactswith
a custom JavaBean via the BeanAdpterModel wrapper, and from the
JavaBean you are interacting with the SQL Model?
So it looks like this: ViewBean > BeanAdapterModel(Custom JavaBean)
SQL Model > RDBMS
That's what I am reading anyway. Please explain this to me.
Would I need to make direct JDBC calls
from my custom model instead of letting JATO dynamically create
the
calls for me?
If my assumptions above are correct, then the custom JavaBean cansimply
use the SQL Model in exactly the same manner as the ViewBean,otherwise,
if no SQL Model is involved, then yes, you need to handle JDBCdirectly,
which is fine, if you do it "right" (connection pooling, result set
handling, etc.).
Thanks,
Greg
--- In SunONE-JATO@y..., "Craig V. Conover" <craig.conover@s...>
wrote:
I think the best approach would be to treat your Domain Objects
(DO) as
the Database (the enterprise tier) from JATO's perspective. You
could
create custom models that interface with our DO's and then the
JATO
Views could easily bind to the custom DO models just like anyother
model. This should eliminate the need for pushing data/objectsfrom
>
view
to model to database.
There is a JATO class called BeanAdapterModel that might be just
what
you need, however, I am not experienced with using it. Maybe
someone
else on my team or in the community could better explain how to
use
>
this
class.
craig
grschroeder wrote:
Venki,
Thanks for the response. Actually, I'm not sure if I can answer
all
of your questions because those are some of the same questions
that
we're trying to answer ourselves. Basically, what we're trying
to
>do
is incorporate our domain object model into the JATO framework.
My
thinking was that one way we could accomplish this was by
storing
>a
Javabean object in the HTTPSession to represent an object in the
domain model, and that the Viewbean and JATO Model could get and
set
data from there. If you have a better suggestion of how to
accomplish this, I'm definitely open to hearing it.
Thanks,
Greg
--- In SunONE-JATO@y..., Venki <heyvenki@y...> wrote:
OK grschroeder , first let me get this straight:
0. Are you going to pass this object to the model, or are u
going
>
to pass the session object to the model?
1. Is there any specific reason for this approach you are
taking?
2. Will there be a notification from the object u havementioned
>to
have the model persist the data?
3. What about the reverse case, when the model refreshes the
data,
how are you going to refresh you object?
4. The JavaBean Object that u are talking about, is it your own
object or is it implementation of an existing JATO interface?
~Venki
grschroeder wrote:I'm fairly new to JATO, but I think I now
have
>a
basic understanding
of how Viewbeans and Models interact. However, I want to
incorporate
the use of a Javabean object that will be stored in the HTTP
session
and will act as the connection between the Viewbean and Model
instead
of having the Viewbean and Model interact directly with each
other.
Basically I would like to have the Model set data in the object
stored in the session so that the Viewbean can pull it out to
display
it. And vice versa, once the user modifies the data and is
ready
>
to
persist it, I would like to have the Viewbean set data in the
object
stored in the session so that the Model can pull it out to
store
>it
in the database. I'm not sure what the best approach would be
to
accomplish this. Any help you could give would be greatly
appreciated.
Thanks,
Greg
To download the latest version of JATO, please visit:
http://www.sun.com/software/download/developer/5102.html
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp
Service.
Venki
IT Solutions
#6, Pycrofts Garden Road, Nugambakkam, Chennai - 600 006
91-44-4925740(Home) 91-44-8212877(Work)
* Luck is what happens when Preparation meets Opportunity.
To download the latest version of JATO, please visit:
http://www.sun.com/software/download/developer/5102.html
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp
>To download the latest version of JATO, please visit:
http://www.sun.com/software/download/developer/5102.html
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp
To download the latest version of JATO, please visit:
http://www.sun.com/software/download/developer/5102.html
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp -
Creation and Modification dates for android file system
Hello all, I am working on a project and i noticed a particular scenario where i'm getting an error everytime i try to run the code below on my android device;
var file:File=File.applicationDirectory.resolvePath("amf.js");
var modDate:Date;
var createDate:Date;
if(file.exists)
try
modDate=file.modificationDate;
credDate=file.creationDate;
trace("Modification date: "+ modDate.toString()+"\nCreation date: "+credDate.toString());
catch(e:Error)
trace(e.message+": Somehow android OS CANNOT READ mODIFICATRION AND CREATING DATES FOR FILES");
Every time i run this on Adobe AIR's Mobile emulator, the correct dates are show up properly(Possibly because the emulator is running on Windows) but when i switch the debug to the device, the statement in the catch block executes. The real error says "Error #3003: File or directory does not exist."
Am i missing something or is this a normal behaviour which i have to find a work around for? The modificationDate and the creationDate are all properties of the FileReference class which i didnt use to instanciate the file object because i wasnt uploading or downloading anything.
Any form of tip will be much appreciated.
Thanks.I run into the same problem while working on some sort of file synching task.
Trying to read the file.modificationDate or creationDate results in an error: "Error #3003: File or directory does not exist."
I have obeserved that this only happens for files that were packaged with the app (and placed in the File.applicationDirectory).
Files that my app has downloaded and saved to the device (File.applicationStorageDirectory) do have a valid creation date and modification date.
Maybe the File.applicationDirectory has different rights?
Does anybody have a solution or workaround for this? -
How to call routine and pass data to routine in vofm
Hi Experts,
I need to update KBETR and KWERT values present in 'Conditions Tab' in Purchase Order (ME21N/ME22N).
I have created a new customer tab in which we enter amount field and percentage filed. When user enters some value in this and clicks on 'Conditions Tab', calculation has to be done and the calculated value has to be appeared across a specific condition type.as i am new to abap i dont know how to create routine and pass data to routine in vofm from customised tab in me21n .
Thank's in advanceHello Rajendra,
You can get plenty of forums in SCN related to it. Follow below steps to create VOFM routine.
Go to VOFM Transaction Code
1. On the Menu Select required Application i.e Pricing
2. Enter any Number in between 600 to 999 for Custom Developments.
3. On entering Pop Screen appears ask for Access Key(We have to remember that Every New Routine needs an Access Key)
4. Once the Access Key is received we can do modification.
5. Enter the Routine Number ,description and insert the Access Key
6. Now the ABAP Editor will open and required code can be copied from Standard SAP Routine and Custom Code Can be developed.
7. Once the coding is completed we have to Activate the Routine
8. Select the Routine and Go to Edit – Activate
9. Ensure that Active check box is ticked upon Activation of the Routine.
10. Double click on the routine will enter into ABAP Editor, we have to generate the Routine
11. Go to Program and select Generate
12.A screen pops up with the related Main Programs and select all required main programs wherever the Routine is being called.
13. Once the Routine is Generated and Activated, We need to configure the Routine in the config.
** Important SAP note: 156230.
Check the below document too.
http://www.scribd.com/doc/35056841/How-to-create-Requirement-Routines
Regards,
Thanga
Maybe you are looking for
-
Hi, i am trying to create an chart based on xml data.... <SALES> <SALE> <YEAR>2006</YEAR> <SOFTWARE>1200</SOFTWARE> <HARDWARE>850</HARDWARE> <SERVICES>2000</SERVICES> </SALE> <SALE> <YEAR>2007</YEAR> <SOFTWARE>1000</SOFTWARE>
-
I have an iphone 4.I upgraded it to 5.0.1 and so I have lost all the data from my iPhone,but i have a backup in my computer.How do I use the backup file ? i.e How will i get that backup file in my iPhone ?
-
I am unable to merge my Excel 2010 information into InDesign. I am having to save it as 97-2003 and then save as CSV. When I save it in the 2010 Excel and then CSV it will not open the data source I selected it comes back after a few minutes and te
-
Should we use triggers to deny alter access to views?
hello all - the requirement is let a group access all the views in the schema but not be able to alter, delete views or stored procedures or functions. what is the best way to do this? thanks in advance...
-
Hello, I am having trouble saving my film in iMovie '09. Previously I have used Movie Maker and saved my film as DV-Avi and all was well. Now that I switched over, I have saved (shared?) my films in numerous ways yet the quality is always a bit softe