VWIC is showing as "WIC module not supported/disabled in this slot"
Hello All,
please help me on this asap!!
Smart Init is enabled
smart init is sizing iomem
TYPE MEMORY_REQ
HWIC Slot 0 0x00200000
PVDM 0 0x00200000
Onboard devices &
buffer pools 0x0228F000
TOTAL: 0x0268F000
Rounded IOMEM up to: 40Mb.
Using 7 percent iomem. [40Mb/512Mb]
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.1(1)T, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Mon 22-Mar-10 02:13 by prod_rel_team
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
Cisco CISCO2901/K9 (revision 1.0) with 483328K/40960K bytes of memory.
Processor board ID FGL162722DK
2 Gigabit Ethernet interfaces
DRAM configuration is 64 bits wide with parity enabled.
255K bytes of non-volatile configuration memory.
250880K bytes of ATA System CompactFlash 0 (Read/Write)
Press RETURN to get started!
*Mar 1 00:00:04.931: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name = c2900 Next reboot level = ipbasek9 and License = ipbasek9
*Mar 1 00:00:05.019: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name = c2900 Next reboot level = uck9 and License = uck9
*Jan 23 07:37:07.403: %IFMGR-7-NO_IFINDEX_FILE: Unable to open nvram:/ifIndex-table No such file or directory
*Jan 23 07:37:15.119: %MAINBOARD-1-UNKNOWN_WIC: wic card in location 0/0 has an unknown id 0x6EF
*Jan 23 07:37:18.679: %LINEPROTO-5-UPDOWN: Line protocol on Interface VoIP-Null0, changed state to up
*Jan 23 07:37:18.679: %LINK-5-CHANGED: Interface GigabitEthernet0/0, changed state to reset
*Jan 23 07:37:18.679: %LINK-5-CHANGED: Interface GigabitEthernet0/1, changed state to reset
*Jan 23 07:37:19.887: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to down
*Jan 23 07:37:19.887: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to down
*Jan 23 07:37:20.823: %LINK-3-UPDOWN: Interface GigabitEthernet0/0, changed state to down
*Jan 23 07:37:20.823: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to down
*Jan 23 07:37:21.063: %SYS-5-CONFIG_I: Configured from memory by console
*Jan 23 07:37:23.083: %LINK-5-CHANGED: Interface GigabitEthernet0/1, changed state to administratively down
*Jan 23 07:37:23.755: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.1(1)T, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Mon 22-Mar-10 02:13 by prod_rel_team
*Jan 23 07:37:23.759: %SNMP-5-COLDSTART: SNMP agent on host Hewitt_Noida is undergoing a cold start
*Jan 23 07:37:37.483: %DSPRM-5-UPDOWN: DSP 1 in slot 0, changed state to up
*Jan 23 07:37:37.483: %DSPRM-5-UPDOWN: DSP 3 in slot 0, changed state to up
*Jan 23 07:37:37.483: %DSPRM-5-UPDOWN: DSP 2 in slot 0, changed state to up
Hewitt_Noida>
Hewitt_Noida>
Hewitt_Noida>
Hewitt_Noida>en
Hewitt_Noida#
Hewitt_Noida#
Hewitt_Noida#sh diag
Slot 0:
C2901 Mother board 2GE, integrated VPN and 4W Port adapter, 2 ports
Port adapter is analyzed
Port adapter insertion time 00:00:56 ago
EEPROM contents at hardware discovery:
PCB Serial Number : FOC1624697D
Hardware Revision : 1.0
Part Number : 73-11834-08
Top Assy. Part Number : 800-30795-06
Board Revision : A0
Deviation Number : 123694
Fab Version : 03
Product (FRU) Number : CISCO2901/K9
Version Identifier : V06
CLEI Code : CMMJA00ARA
Processor type : C1
Chassis Serial Number : FGL162722DK
Chassis MAC Address : d48c.b51a.b668
MAC Address block size : 72
Manufacturing Test Data : 00 00 00 00 00 00 00 00
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF C1 8B 46 4F 43 31 36 32 34 36 39 37 44 40
0x10: 06 17 41 01 00 82 49 2E 3A 08 C0 46 03 20 00 78
0x20: 4B 06 42 41 30 88 00 01 E3 2E 02 03 CB 8C 43 49
0x30: 53 43 4F 32 39 30 31 2F 4B 39 89 56 30 36 20 D9
0x40: 04 40 C1 CB C2 C6 8A 43 4D 4D 4A 41 30 30 41 52
0x50: 41 09 C1 C2 8B 46 47 4C 31 36 32 37 32 32 44 4B
0x60: C3 06 D4 8C B5 1A B6 68 43 00 48 C4 08 00 00 00
0x70: 00 00 00 00 00 F3 00 65 40 01 25 41 00 87 42 00
0x80: 00 F8 00 28 03 E8 1C 89 07 D0 20 21 0B B8 20 93
0x90: 0F A0 21 2F 13 88 21 83 17 70 21 A8 1B 58 21 B0
0xA0: 1F 40 21 AB 23 28 21 79 27 10 21 78 41 01 1D 42
0xB0: 00 00 F8 00 28 03 E8 1C 20 07 D0 1F 40 0B B8 20
0xC0: 6C 0F A0 21 34 13 88 21 34 17 70 21 98 1B 58 21
0xD0: 98 1F 40 21 98 23 28 21 34 27 10 21 34 FF FF FF
0xE0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0xF0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
PVDM Slot 0:
128-channel (G.711) Voice/Fax PVDM3 DSP DIMM PVDM daughter card
Hardware Revision : 1.0
Part Number : 73-11810-03
Board Revision : C0
Deviation Number : 0
Fab Version : 03
PCB Serial Number : FOC1602145Q
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Processor type : 00
Product (FRU) Number : PVDM3-128
Version Identifier : V01
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 05 DC 41 01 00 82 49 2E 22 03 42 43 30
0x10: 88 00 00 00 00 02 03 C1 8B 46 4F 43 31 36 30 32
0x20: 31 34 35 51 03 00 81 00 00 00 00 04 00 09 00 CB
0x30: 8F 50 56 44 4D 33 2D 31 32 38 20 20 20 20 20 20
0x40: 89 56 30 31 20 D9 02 40 C1 FF FF FF FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
WIC Slot 0:
Unknown WAN daughter card
WIC module not supported/disabled in this slot
Hardware Revision : 1.0
Top Assy. Part Number : 800-34658-01
Part Number : 73-13420-01
Board Revision : B0
Deviation Number : 124402
Fab Version : 05
PCB Serial Number : FOC16100L9C
Version Identifier : V01
Product (FRU) Number : VWIC3-2MFT-T1/E1
CLEI Code : COUIA7NCAA
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 06 EF 41 01 00 C0 46 03 20 00 87 62 01
0x10: 82 49 34 6C 01 42 42 30 88 00 01 E5 F2 02 05 C1
0x20: 8B 46 4F 43 31 36 31 30 30 4C 39 43 89 56 30 31
0x30: 20 CB 90 56 57 49 43 33 2D 32 4D 46 54 2D 54 31
0x40: 2F 45 31 C6 8A 43 4F 55 49 41 37 4E 43 41 41 03
0x50: 00 81 00 00 00 00 04 00 D9 03 40 C1 CB FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
Hewitt_Noida#
Hi Akshay,
As per
http://www.cisco.com/en/US/partner/prod/collateral/routers/ps5855/data_sheet_c36-609138.html
VWIC3-1MFT-T1/E1 is supported since 15.1(1)T1 and later.
Make sure you have this minimum IOS.
HTH
Manish
Similar Messages
-
Wireless Module Not Supported...in the manual it is?
HP maual located here: http://h10032.www1.hp.com/ctg/Manual/c02770268.pdf
Page 20 Chapter 3 it lists:
Intel Centrino® Wireless-N 1000 (802.11b/g/n) 593530-001
So I ordered this from the HP parts store and received it today and the laptop posts with a Wireless Module Not Supported. WLAN Module ID 702 message.
So how do I proceed from here? Laptop came with an ralink card that only connected at 72Mbps, the atheros AR9285 constantly connects at 65Mbps unless I reset my router every time I connect.
My laptop is a HP Pavilion g6-1a40ca
Help please!
MarcThanks for replying
Looks like modding the bios is the only way I'll get something better into this laptop. All I know is that the two officially supported cards I have right here are terribly slow/flaky. Going by the manual I really don't have any other choice in wireless cards. This is a great laptop for the price, just wish it didn't come crippled.
Oh I know...lol...I'll buy a usb one and soldier it onto one of the usb ports internally. j/k
Thanks again for clarifying for me. If anyone has anything additional to add to this thread in future about adding support official or unofficial, please post it here.
Thanks,
Marc -
I have a DV6Z-6C00 CTO laptop notbook and I recently had to install a new wireless card but I keep getting a Wireless module not supported error. I checked with the manual and I ordered a Intel Centrino-N 1000 WLAN Module (593530-001 replacement #) and I checked on the actual card (and they match). So why am I getting this error, and how can I fix it?
Btw I have Windows 8Is the wireless card an actual HP card? It is not enough that it be the same Intel chipset card.
-
WhyI payment item in clash of clans game once time nexttime donot payment ?
It show messenger Please contace itune support to complete this transactionThese are user-to-user forums, if you haven't already done so then you can contact iTunes support via this page and ask them why the message is appearing : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page
-
Migration from 9i to 11g Transparent Gateway results in a) ORA-12704: character set mismatch b) ORA-02070: database ... does not support SYS_OP_C2C in this context
What Transparent Gateway (TG) 11g configuration steps prevent the following errors?:
a) ORA-12704: character set mismatch
b) ORA-02070: database <DB_link_name> does not support SYS_OP_C2C in this context
Hints:
The current 9i TG works with the existing views and packages. These same db objects will not compile using the new 11g TG.
The db objects are on an Oracle 10g database linked to an SQL Server 2008 R2 database.
Since the 9i TG works I assume a configuration to the 11g TG will get it working same as before. But what...
Is is something controlled by these parameters? (Sorry, I don't know how this stuff works. I'm the application developer. My DBAs setup the Transparent Gateways.):
Parameters in the Gateway Startup Shell script:
ORA_NLS33
NLS_LANG
Parameters in the initsid.ora file:
HS_LANGUAGE
HS_NLS_DATE_FORMAT
HS_NLS_DATE_LANGUAGE
I'm avoiding the known workaround to refactor the VIEWS and PACKAGES to contain CAST() statements to explicitly match the data types. A server side fix to the 11g TG is preferred.
Sample code:
a) ORA-12704: character set mismatch
... is caused by SQL that works with my 9i TG but not with my 11g TG. It's a snippit from my view that won't compile:
select status_code -- Oracle VARCHAR2(30)
from ora_app_interfaces
UNION
select "StatusCode" as status_code -- SQL Server NVARCHAR(30)
from SqlAppInterfaces
Example workaround that I'm avoiding:
select status_code
from ora_app_interfaces
UNION
select CAST("StatusCode" as VARCHAR(30)) as status_code
from SqlAppInterfaces
b) ORA-02070: database <DB_link_name> does not support SYS_OP_C2C in this context
A line of code in the procedure that compiles correctly but fails to execute:
-- Insert into SQL Server from Oracle
insert into PatientMedRecNum (
"PatID", -- SQL Server INT
"MedRecNum", -- SQL Server NVARCHAR(11)
"Hospital") -- SQL Server NVARCHAR(30)
values (
pi_pat_id, -- Oracle NUMBER
pi_med_rec_num, -- Oracle VARCHAR2
pi_hospital); -- Oracle VARCHAR2
I'd guess the errors are caused by the TG's implicit conversion between the Oracle VARCHAR2 and the SQL Server NVARCHAR... but this works fine on the 9i TG... how do I set it up to work on the 11g TG?
Thanks!Trace of 11g TG... generating errors due to lack of automatic mapping from SQL NVARCHAR to Oracle NVARCHAR, where the previous 9g TG mapped from SQL NVARCHAR to Oracle VARCHAR2.
Oracle Corporation --- MONDAY SEP 22 2014 13:35:08.186
Heterogeneous Agent Release
11.2.0.4.0
Oracle Corporation --- MONDAY SEP 22 2014 13:35:08.186
Version 11.2.0.4.0
Entered hgogprd
HOSGIP for "HS_FDS_TRACE_LEVEL" returned "DEBUG"
Entered hgosdip
setting HS_OPEN_CURSORS to default of 50
setting HS_FDS_RECOVERY_ACCOUNT to default of "RECOVER"
setting HS_FDS_RECOVERY_PWD to default value
setting HS_FDS_TRANSACTION_LOG to default of HS_TRANSACTION_LOG
setting HS_IDLE_TIMEOUT to default of 0
setting HS_FDS_TRANSACTION_ISOLATION to default of "READ_COMMITTED"
setting HS_NLS_NCHAR to default of "UCS2"
setting HS_FDS_TIMESTAMP_MAPPING to default of "DATE"
setting HS_FDS_DATE_MAPPING to default of "DATE"
setting HS_RPC_FETCH_REBLOCKING to default of "ON"
setting HS_FDS_FETCH_ROWS to default of "100"
setting HS_FDS_RESULTSET_SUPPORT to default of "FALSE"
setting HS_FDS_RSET_RETURN_ROWCOUNT to default of "FALSE"
setting HS_FDS_PROC_IS_FUNC to default of "FALSE"
setting HS_FDS_MAP_NCHAR to default of "TRUE"
setting HS_NLS_DATE_FORMAT to default of "YYYY-MM-DD HH24:MI:SS"
setting HS_FDS_REPORT_REAL_AS_DOUBLE to default of "FALSE"
setting HS_LONG_PIECE_TRANSFER_SIZE to default of "65536"
setting HS_SQL_HANDLE_STMT_REUSE to default of "FALSE"
setting HS_FDS_QUERY_DRIVER to default of "FALSE"
setting HS_FDS_SUPPORT_STATISTICS to default of "TRUE"
setting HS_FDS_QUOTE_IDENTIFIER to default of "TRUE"
setting HS_KEEP_REMOTE_COLUMN_SIZE to default of "OFF"
setting HS_FDS_GRAPHIC_TO_MBCS to default of "FALSE"
setting HS_FDS_MBCS_TO_GRAPHIC to default of "FALSE"
setting HS_CALL_NAME_ISP to "gtw$:SQLTables;gtw$:SQLColumns;gtw$:SQLPrimaryKeys;gtw$:SQLForeignKeys;gtw$:SQLProcedures;gtw$:SQLStatistics;gtw$:SQLGetInfo"
setting HS_FDS_DELAYED_OPEN to default of "TRUE"
setting HS_FDS_WORKAROUNDS to default of "0"
setting HS_FDS_ARRAY_EXEC to default of "TRUE"
Exiting hgosdip, rc=0
ORACLE_SID is "xxxDEV"
Product-Info:
Port Rls/Upd:4/0 PrdStat:0
Agent:Oracle Database Gateway for MSSQL
Facility:hsa
Class:MSSQL, ClassVsn:11.2.0.4.0_0019, Instance:xxxDEV
Exiting hgogprd, rc=0
Entered hgoinit
HOCXU_COMP_CSET=1
HOCXU_DRV_CSET=178
HOCXU_DRV_NCHAR=1000
HOCXU_DB_CSET=178
HS_LANGUAGE not specified
rc=1239980 attempting to get LANG environment variable.
HOCXU_SEM_VER=102000
Entered hgolofn at 2014/09/22-13:35:08
RC=-1 from HOSGIP for "PATH"
Setting PATH to "C:\oracle\product\11.2.0\tg_2\dg4msql\driver\lib"
Exiting hgolofn, rc=0 at 2014/09/22-13:35:08
HOSGIP for "HS_OPEN_CURSORS" returned "50"
HOSGIP for "HS_FDS_FETCH_ROWS" returned "100"
HOSGIP for "HS_LONG_PIECE_TRANSFER_SIZE" returned "65536"
HOSGIP for "HS_NLS_NUMERIC_CHARACTER" returned ".,"
HOSGIP for "HS_KEEP_REMOTE_COLUMN_SIZE" returned "OFF"
HOSGIP for "HS_FDS_DELAYED_OPEN" returned "TRUE"
HOSGIP for "HS_FDS_WORKAROUNDS" returned "0"
HOSGIP for "HS_FDS_MBCS_TO_GRAPHIC" returned "FALSE"
HOSGIP for "HS_FDS_GRAPHIC_TO_MBCS" returned "FALSE"
treat_SQLLEN_as_compiled = 1
Exiting hgoinit, rc=0 at 2014/09/22-13:35:08
Entered hgolgon at 2014/09/22-13:35:08
reco:0, name:abaccess, tflag:0
Entered hgosuec at 2014/09/22-13:35:08
uencoding=UTF16
Entered shgosuec at 2014/09/22-13:35:08
Exiting shgosuec, rc=0 at 2014/09/22-13:35:08
shgosuec() returned rc=0
Exiting hgosuec, rc=0 at 2014/09/22-13:35:08
HOSGIP for "HS_FDS_RECOVERY_ACCOUNT" returned "RECOVER"
HOSGIP for "HS_FDS_TRANSACTION_LOG" returned "HS_TRANSACTION_LOG"
HOSGIP for "HS_FDS_TIMESTAMP_MAPPING" returned "DATE"
HOSGIP for "HS_FDS_DATE_MAPPING" returned "DATE"
HOSGIP for "HS_FDS_MAP_NCHAR" returned "TRUE"
HOSGIP for "HS_FDS_RESULTSET_SUPPORT" returned "FALSE"
HOSGIP for "HS_FDS_RSET_RETURN_ROWCOUNT" returned "FALSE"
HOSGIP for "HS_FDS_PROC_IS_FUNC" returned "FALSE"
HOSGIP for "HS_FDS_REPORT_REAL_AS_DOUBLE" returned "FALSE"
HOSGIP for "HS_FDS_DEFAULT_OWNER" returned "dbo"
HOSGIP for "HS_SQL_HANDLE_STMT_REUSE" returned "FALSE"
Entered hgocont at 2014/09/22-13:35:08
HS_FDS_CONNECT_INFO = "sqlserverxxx/sqlinstancexxx/SQL_Server_2008_xxx_DEV"
RC=-1 from HOSGIP for "HS_FDS_CONNECT_STRING"
Entered hgogenconstr at 2014/09/22-13:35:08
dsn: sqlserverxxx/sqlinstancexxx/SQL_Server_2008_xxx_DEV, name:xxx_admin
optn:
Entered hgocip at 2014/09/22-13:35:08
dsn:sqlserverxxx/sqlinstancexxx/SQL_Server_2008_xxx_DEV
Exiting hgocip, rc=0 at 2014/09/22-13:35:08
Entered shgogohn at 2014/09/22-13:35:08
ohn is 'OraGtw11g_home2'
Exiting shgogohn, rc=0 at 2014/09/22-13:35:08
RC=-1 from HOSGIP for "HS_FDS_ENCRYPT_SESSION"
using 0 as default value for "HS_FDS_ENCRYPT_SESSION"
RC=-1 from HOSGIP for "HS_FDS_VALIDATE_SERVER_CERT"
using 1 as default value for "HS_FDS_VALIDATE_SERVER_CERT"
Entered hgocont_OracleCsidToIANA at 2014/09/22-13:35:08
Returning 2252
Exiting hgocont_OracleCsidToIANA at 2014/09/22-13:35:08
Exiting hgogenconstr, rc=0 at 2014/09/22-13:35:08
Entered hgopoer at 2014/09/22-13:35:08
hgopoer, line 231: got native error 5701 and sqlstate 01000; message follows...
[Oracle][ODBC SQL Server Wire Protocol driver][Microsoft SQL Server]Changed database context to 'Xxx_XXX_DEV'. {01000,NativeErr = 5701}[Oracle][ODBC SQL Server Wire Protocol driver][Microsoft SQL Server]Changed language setting to us_english. {01000,NativeErr = 5703}
Exiting hgopoer, rc=0 at 2014/09/22-13:35:08
hgocont, line 2764: calling SqlDriverConnect got sqlstate 01000
Entered hgolosf at 2014/09/22-13:35:08
Exiting hgolosf, rc=0 at 2014/09/22-13:35:08
DriverName:HGmsss23.dll, DriverVer:07.01.0093 (B0098, U0065)
DBMS Name:Microsoft SQL Server, DBMS Version:10.00.2531
Exiting hgocont, rc=0 at 2014/09/22-13:35:08 with error ptr FILE:hgocont.c LINE:2764 ID:SQLDriverConnect
SQLGetInfo returns Y for SQL_CATALOG_NAME
SQLGetInfo returns 128 for SQL_MAX_CATALOG_NAME_LEN
Exiting hgolgon, rc=0 at 2014/09/22-13:35:08
Entered hgoulcp at 2014/09/22-13:35:08
Entered hgowlst at 2014/09/22-13:35:08
Exiting hgowlst, rc=1 at 2014/09/22-13:35:08
SQLGetInfo returns Y for SQL_PROCEDURES
SQLGetInfo returns 0x1f for SQL_OWNER_USAGE
TXN Capable:2, Isolation Option:0xf
SQLGetInfo returns 128 for SQL_MAX_SCHEMA_NAME_LEN
SQLGetInfo returns 128 for SQL_MAX_TABLE_NAME_LEN
SQLGetInfo returns 134 for SQL_MAX_PROCEDURE_NAME_LEN
HOSGIP returned value of "TRUE" for HS_FDS_QUOTE_IDENTIFIER
SQLGetInfo returns " (0x22) for SQL_IDENTIFIER_QUOTE_CHAR
13 instance capabilities will be uploaded
capno:1992, context:0x0001ffff, add-info: 0
capno:3042, context:0x00000000, add-info: 0, translation:"42"
capno:3047, context:0x00000000, add-info: 0, translation:"57"
capno:3049, context:0x00000000, add-info: 0, translation:"59"
capno:3050, context:0x00000000, add-info: 0, translation:"60"
capno:3066, context:0x00000000, add-info: 0
capno:3067, context:0x00000000, add-info: 0
capno:3068, context:0x00000000, add-info: 0
capno:3069, context:0x00000000, add-info: 0
capno:3500, context:0x00000001, add-info: 91, translation:"42"
capno:3501, context:0x00000001, add-info: 93, translation:"57"
capno:3502, context:0x00000001, add-info: 107, translation:"59"
capno:3503, context:0x00000001, add-info: 110, translation:"60"
Exiting hgoulcp, rc=0 at 2014/09/22-13:35:08
Entered hgouldt at 2014/09/22-13:35:08
NO instance DD translations were uploaded
Exiting hgouldt, rc=0 at 2014/09/22-13:35:08
Entered hgobegn at 2014/09/22-13:35:08
tflag:0 , initial:1
hoi:0x12ee18, ttid (len 32) is ...
xxx
xxx
tbid (len 10) is ...
0: 09000F00 0FAC1E00 010A [..........]
Exiting hgobegn, rc=0 at 2014/09/22-13:35:08
Entered hgodtab at 2014/09/22-13:35:08
count:1
table: XXX_INTERFACE
Allocate hoada[0] @ 0000000005F58270
Entered hgopcda at 2014/09/22-13:35:08
Column:1(InterfaceID): dtype:2 (NUMERIC), prc/scl:20/0, nullbl:0, octet:0, sign:1, radix:10
Exiting hgopcda, rc=0 at 2014/09/22-13:35:08
Entered hgopcda at 2014/09/22-13:35:08
Column:2(TableName): dtype:-9 (WVARCHAR), prc/scl:30/0, nullbl:0, octet:60, sign:1, radix:0
Exiting hgopcda, rc=0 at 2014/09/22-13:35:08
Entered hgopcda at 2014/09/22-13:35:08
Column:3(TableID): dtype:4 (INTEGER), prc/scl:10/0, nullbl:0, octet:0, sign:1, radix:10
Exiting hgopcda, rc=0 at 2014/09/22-13:35:08
Entered hgopcda at 2014/09/22-13:35:08
Column:4(StatusCode): dtype:-9 (WVARCHAR), prc/scl:30/0, nullbl:0, octet:60, sign:1, radix:0
Exiting hgopcda, rc=0 at 2014/09/22-13:35:08
Entered hgopcda at 2014/09/22-13:35:08
Column:5(StatusTimestamp): dtype:93 (TIMESTAMP), prc/scl:23/3, nullbl:0, octet:0, sign:1, radix:0
Exiting hgopcda, rc=0 at 2014/09/22-13:35:08
Entered hgopcda at 2014/09/22-13:35:08
Column:6(InterfaceLog): dtype:-9 (WVARCHAR), prc/scl:400/0, nullbl:1, octet:800, sign:1, radix:0
Exiting hgopcda, rc=0 at 2014/09/22-13:35:08
The hoada for table XXX_INTERFACE follows...
hgodtab, line 1073: Printing hoada @ 0000000005F58270
MAX:6, ACTUAL:6, BRC:1, WHT=6 (TABLE_DESCRIBE)
hoadaMOD bit-values found (0x40:TREAT_AS_NCHAR,0x400:UNICODE_COLUMN)
DTY NULL-OK LEN MAXBUFLEN PR/SC CST IND MOD NAME
3 DECIMAL N 22 22 20/ 0 0 0 0 InterfaceID
12 VARCHAR N 60 60 128/ 30 1000 0 440 TableName
4 INTEGER N 4 4 0/ 0 0 0 0 TableID
12 VARCHAR N 60 60 128/ 30 1000 0 440 StatusCode
91 DATE N 16 16 0/ 0 0 0 0 StatusTimestamp
12 VARCHAR Y 800 800 129/144 1000 0 440 InterfaceLog
Exiting hgodtab, rc=0 at 2014/09/22-13:35:08
Entered hgodafr, cursor id 0 at 2014/09/22-13:35:08
Free hoada @ 0000000005F58270
Exiting hgodafr, rc=0 at 2014/09/22-13:35:08
Entered hgotcis at 2014/09/22-13:35:08
Calling SQLStatistics for XXX_INTERFACE
IndexType=SQL_TABLE_STAT: cardinality=0
IndexType=1: PK_XXX_Interface
IndexType=3: IX_TableID
IndexType=3: IX_TableName
Calling SQLColumns for dbo.SQL_app_INTERFACE
#1 Column "InterfaceID": dtype=2, colsize=20, decdig=0, char_octet_length=0, cumulative avg row len=15
#2 Column "TableName": dtype=-9, colsize=30, decdig=0, char_octet_length=60, cumulative avg row len=60
#3 Column "TableID": dtype=4, colsize=10, decdig=0, char_octet_length=0, cumulative avg row len=64
#4 Column "StatusCode": dtype=-9, colsize=30, decdig=0, char_octet_length=60, cumulative avg row len=109
#5 Column "StatusTimestamp": dtype=93, colsize=23, decdig=3, char_octet_length=0, cumulative avg row len=125
#6 Column "InterfaceLog": dtype=-9, colsize=400, decdig=0, char_octet_length=800, cumulative avg row len=725
3 Index(es) found:
Index: PK_XXX_Interface, type=1, ASCENDING, UNIQUE, cardinality=0
#1 Column 1: InterfaceID
Index: IX_TableID, type=3, ASCENDING, NON-UNIQUE, cardinality=0
#1 Column 3: TableID
Index: IX_TableName, type=3, ASCENDING, NON-UNIQUE, cardinality=0
#1 Column 2: TableName
Exiting hgotcis, rc=0 at 2014/09/22-13:35:08 -
Hi. I have tryed to reset my iPhone, but when i need to activate this with icloud account, it say "[email protected]" not supported to unlock this iPhone.
login and password are 100% correct. I've tryed to change the password from iclodu.com, nothing chnage, the same error. And one more thing, on the icloud account, the iPhone does not apair.Did you buy the iPhone brand new from an Authorised Apple reseller or secondhand from another source ?
-
When I afford an in-app purchase for a game.It`s always show me " please contact itunes support to complete this transaction"
These are user-to-user forums, you can contact iTunes support via this page and ask why you are getting the message and how to resolve it : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page
-
IPhone 5 show message "charging is not supported" yet charge shows 100%
My iPhone 5 worked fine the first two nights. Then on the 3rd. morning (after charging all night) I see the message "charging is not supported with this accessory". I switched to old iPhone 4 wall charger with lightning cable, same message in the morning. Tried again with new lightning cable I received in the mail and original iPhone 5 wall charger. Worked fine first night and morning, but on 2nd. morning message "charging is not supported..) came on again, yet charge shows 100%. Each time I've plugged in lightning cable everything look ok (no "charging not suported" message). The message always appears in the morning after a nights charging.
Any ideas to try before I make an appointment with Apple Genius and drive 20 miles?
Thanks,
Bud P.I took my iPhone 5 to the Apple Store and spoke with an Apple Genius. He checked out my iPhone and then I was told that that was not a hardware problem with the cable or charger unit, but that the message could appear if the phone was fully charged and left on too long after being fully charged. Since then I let the battery run down longer before I charge and then fully charge in the evening and unplug before I go to sleep. I have not had the message appear again since I did that.
bpiraino -
HT201272 if i downloaded hd tv shows but it is not supported on my itouch- what do i do?
if i downloaded items in HD format but I touch does not support this, what is the next step to get the seasons on the itouch?
Hello Jill146,
Thanks for the question, and welcome to Apple Support Communities.
The following articles may provide more information in relation to your question:
iTunes Store: About HD TV Shows
http://support.apple.com/kb/HT3455
iTunes: Purchasing and viewing HD videos
http://support.apple.com/kb/HT3209
HD videos feature a higher-quality picture, but are designed to be played only on your iPhone 4 or later, iPod touch (4th generation), iPad, iPad 2, computer, or Apple TV. HD content is offered in either 720p or 1080p.
When you purchase an HD video on a supported device or computer, only HD video will be downloaded. To download the SD version, you need to download the video again from your Purchased page. Conversely, if you purchase an HD video on an unsupported device, the SD version will be downloaded. Then, you will need to download the HD version from your Purchased page.
Thanks,
Matt M. -
i want to know how to get my bluetooth working with other phones please help as when i go to connect it says device not supported!!
The iPhone cannot connect to any other phone over Bluetooth.
The exception is other iOS devices in games and apps that have 'peer-to-peer' Bluetooth connectivity. -
Latest FirePro cards not supported in first 16x slot on S20
I have a few of the new Firepro cards (specifically the W5000 and the W7000) and I am finding that neither of them will work when they are placed in the first 16x slot of my S20. If I place them in the second 16x slot, then it will work. This is not good as I want to run two cards. I currently am running a Geforce GTX 480 in the first slot and it is behaving as expected.
Is there a specific vbios that is required for this to be recognized in the first slot.
Note that the LED light on the back of the card is red and I am getting the video not found post beeps. I am also on the latest system bios.
ThanksJust to be clear, mixing NV and AMD cards is a bad idea. I think you're trying to get a config working with multiple Firepro cards, but it wasn't totally clear.
Taking the GeForce card out of the equation, the Firepro cards in question aren't officially supported. From a power perspective, the W7000 is 150W TDP (or lower) and the W5000 is bus powered. So dual W7000 shouldn't be an issue there.
My guess is you're running into BIOS issues, and probably more specifically OPROM issues. It could be a space problem, so disabling features such as second LAN and PXE boot (if they are not used) is an option. But given that we've done no official qual work on those cards, it's hard to say what the exact problem is.
Also note that the first x16 slot on the bus that gets detected by BIOS is the "lower" x16 slot...so your "primary" card should go there.
I'll finish by my standard canned response of:
The W5000/W70000 is not officially supported
NV GeForce cards are not officially supported
Mixing of the two above cards are definintely not supported -
Hi,
We have migrated CSM to ACE Module recentlym all the applications are working fine. But one of our real server , Hosting team did NIC Teaming (Active-Active) which was working fine but not with ACE Module (Briding Mode).
My assumtion is because of ACE in Bridge mode all the non-loadbalancing traffic has to go through ACE Module, So we couldnt access the server directly. If ACE is in One-armed mode i think it should be fine.
But with bridge mode do we have any option to make it working.there is a restriction regarding NIC teaming in active/active mode.
The ACE uses an hardcoded mac-to-IP mapping with ARP. As with active active nic teaming you'll have 2 different mac addresses, the one which is not present in the ARP cache of the ACE is considered as a security violation. -
We got a new email address, and it appears that we successfully changed/updated our itunes/icloud account. When we work from our PC everything looks changed, and is obviously reading from our devices. However, all of our devices still show our old email address as the itunes store/icloud account and none of our devices will let us change this. It keeps asking us to sign in with our old Apple ID, but it won't let us sign in. We've tried multiple passwords and have tried to reset it, but that is not working either. Now, its cycling and keeps popping up...won't let us get to any other screen unless we shut off.
I read the support questions and it said to make sure "find my phone" is shut down, but we can't even do that without a password. Very frustrating. Can anyone help?To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iDevice, then sign back in with the ID you wish to use. When you do this you may find that the password for your old ID isn't accepted. If this should happen, and if your old ID is an earlier version of your current ID, you need to temporarily recreate your old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iDevice on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.
-
Could not complete the Video Frames to Layers command because Ps does not support video on this mac
im trying to make a gif but it does not allow me to import the video frames this pops up when i do click it.
Unfortunatly, the 32 bit versions of windows doesn't support video in photoshop cc.
see this post:
http://forums.adobe.com/message/5802978#5802978 -
ORA-02070: database HS_ABS_VW does not support ROWIDs in this context
I have two heterogeneous connections with sql server in Oracle 9i. These are the inv_ tables and abs_ tables (HS_ABS_VW ) . When I add the inline view bas the ORA-2070 error will occur. When I run these separatly they run fine.
Anybody an idea?
SELECT week,toetsopdracht,gewas,rasnaam,batch,zaden,rn_total as "Start",Eind,Box || let || bereik as Labcode,Protocol
FROM
SELECT a.*,
lead(let,1) over (partition by box,protocol order by box,protocol) as bereik,
lead(rn_total,1) over (partition by box,protocol order by box,protocol) as eind
FROM
SELECT sdu.u_week_of_processing as Week,
ad.method_code as ToetsOpdracht,
ap.crop_description as Gewas,
ad.variety_name as RasNaam,
ad.batch_number as Batch,
ad.number_of_seeds as Zaden,
sau.u_box_code as Box,
p.name as protocol,
bas.primertype,
bas.uitslag,
count(*) over (partition by sau.u_box_code,p.name) tel,
row_number() over (partition by sau.u_box_code,p.name order by sau.u_box_code,p.name,sau.u_box_position) rn_box,
row_number() over (partition by p.name order by sau.u_box_code,p.name,sau.u_box_position) rn_total,
substr(sau.u_box_position,1,1) let
FROM sdg sd,sdg_user sdu,sample sa,sample_user sau,aliquot a,test t,test_user tu,u_protocol p,abs_determinations ad,abs_primaries ap,
SELECT distinct ge.gewasnaam,gr.groepnaam,r.abs_product_number, r.abs_reciproke, p.primernaam, pt.primertype,u.uitslag
FROM inv_uitslagteelten u, inv_primers p, inv_rassen r,inv_teelten t,inv_groepen gr,inv_gewassen ge,
SELECT k.teeltid, k.primerid,
concat(max(case when k.primertype = 'f' then 'f' else null end),max(case when k.primertype = 'i' then 'i' else null end)) primertype
FROM
SELECT teeltid,primerid,'f' as PrimerType
FROM inv_uitslagteelten
WHERE onderscheidgroep = 1
UNION
SELECT teeltid,inteeltprimerid as primerid,'i' as PrimerType
FROM inv_teelten
WHERE inteeltprimerid is not null
) k
GROUP BY k.teeltid,k.primerid
) pt
WHERE pt.teeltid = u.teeltid
AND pt.primerid = u.primerid
AND pt.primerid = p.primerid
AND pt.teeltid = t.teeltid
AND t.rasid = r.rasid
AND t.groepid = gr.groepid
AND gr.gewasid = ge.gewasid
) bas
WHERE sdu.u_abs_determination = ad.determination_assignment
AND sdu.u_abs_product_number = ap.product_number
AND sd.sdg_id = sdu.sdg_id
AND sd.sdg_id = sa.sdg_id
AND sa.sample_id = sau.sample_id
AND sa.sample_id = a.sample_id
AND a.aliquot_id = t.aliquot_id
AND t.test_id = tu.test_id
AND tu.u_protocol_id = p.u_protocol_id
AND sdu.U_ABS_GROUP_CODE = bas.groepnaam
AND sdu.U_ABS_PRODUCT_NUMBER = bas.abs_product_number
AND sdu.U_ABS_RECIPROKE = bas.abs_reciproke
AND p.name = bas.primernaam
AND sd.sdg_id = 391
) a
WHERE rn_box = 1 OR tel = rn_box
WHERE rn_box = 1Very strange! Can someone explain to me why I don't get tjhe error when leaving the distinct out from the inline view pt?
Maybe you are looking for
-
Going from a Powerbook to a new Macbook
I have just purchased a new Macbook and want to transfer everything from my older (3 year old) Powerbook G4 to it. Can I use a Firewire to Firewire connection to do an "all at once" transfer? One IT person says yes, another is more conservative and s
-
Investigation on the problem why the exchange rate in the invoice is not u
Hi, Informed by customer that the exchange rate (HKD-MOP) of ULP has been changed to 1.0309 from 1.03 since 26 Aug. The corrected exchange rate should be 1.03 Would you do the investigation on the problem why the exchange rate in the invoice is not u
-
How to add dependent vi to my project
Thanks, Kyle; (Ref# 1984785) Yes, the cursor situation is working out well. May I ask 2 quick questions on another topic? (1) Please see attached screen shot of my project. I created a new vi, "FindPeaks.vi", for use inside a sub-vi, "CaptureGrap
-
im stilling learning how to properly implement methods into Java programs, but im currently working on this program here but am having trouble implementing the method DBGen into the class DBPRoject (the switch statement in main is a program menu, but
-
Accesssing the web from SuSe using firefox
I just loaded SuSe and it came with firefox. I can only access a limited very limited number of web pages. Is there some parameter change I need to make in order for firefox to be able to access other things on the web from SuSe?