VWLC does not support 802.11ac standard?

On data sheet page, on wireless standards i cannot see 802.11ac to be supported.
why? it is not supported or is just an error on the data sheet.

802.11ac support is tied to the access point and the compatibility with code version on the WLC/vWLC. SO as long as you have 802.11ac access points and the proper supported WLC/vWLC code, 802.11ac will be available.
-Scott

Similar Messages

Why Airport Extreme 802.11ac on 2.4Ghz does not support 802.11ac?

On my Airport Extreme 802.11a/c, using Wifi Scanner, I can see that:
2.4ghz has PHY Mode: 802.11b/g/n
and
5ghz has PHY Mode: 802.11ac
On APPLE website:
"AirPort Extreme features simultaneous dual-band 802.11ac Wi‑Fi. That means it transmits at both the 2.4GHz and 5GHz frequencies at the same time"
My question is why is the 2.4ghz not showing PHY Mode that includes "ac"?
Is my Airport router faulty? if so, I will need to return it.
Thanks

The "ac" setting only runs on the 5 GHz channel(s) on any router. 2.4 GHz could never support "ac" speeds.

My safari does not support in gmail standard view

Plz help me
My mac os x 10.6.2
Safari does not load in standard view
some time load gmail and view in safari Rcc in side

I have the same problem and must open it in html.

Does the 702W support 802.11AC

Does the new Cisco 702W AP support 802.11AC standard?? and also like we have site survey image for 3600-I AP, does the 702W also have a site survey image, or I can site-survey jsut with any autonomous firmware on it.
thanks

Hi lovleen.arora
from looking at the cisco documentation for the cisco 702w it does not support 802.11ac
but maximum of 802.11n
http://www.cisco.com/c/en/us/td/docs/wireless/access_point/702W/quick/guide/ap702Wgetstart.html#pgfId-51225
hopefully this helps

Should I wait to buy my iMac when apple upgrades it to support 802.11ac Wi-Fi ?

Since apple released the Macbook air that supports 802.11ac wi fi, is it going to do the same with all the others products? Being so, I understand that if I by an imac today, it will not support 802.11ac. And this imac will not make the most out of the new airport extreme that delivers 802.11ac (even though the new airport extreme supports 802.11n), isn't that right?

Well, it is reasonable to expect that, yes, the other hardware will get upgraded to ac as it gets updated. As to when any particular model line will get updated, that is anybody's guess. Nobody has any idea how long you may have to wait for that one particular feature. Only you can decide if you are better off waiting or getting what you need now.
Are you even maxing out your 802.11n network speed and bandwidth now? If not, then having ac is sort of moot, isn't it? Sort of like having a car capable of 200mph, but the traffic volume never lets you get above 70 anyway, it really just does not matter.

Airport Utility 6.3.2 says it does not support AirPort Express (802.11a/b/g)

My Airport utility is the latest version 6.3.2 but it does not support my AirPort Express (802.11a/b/g). I tried to download an earlier version but it wont let me.

Apple no longer supports these earlier base stations. If you wish to retain using an older 802.11g AirPort base station you will be left with only a few choices in order to administer it: 1) Use a Mac with an earlier OS X operating system, Snow Leopard or Leopard, or 2) Use a Windows XP or Windows 7 computer running AirPort Utility for Windows.

HT2822 What is the better Connection on Apple TV v2, Ethernet or Wifi 802.11n???? does not support with ethernet gigabit?

What is the better Connection on Apple TV v2, Ethernet or Wifi 802.11n????
Does not support with ethernet gigabit?

If you have stable wifi with good connectivity it should work fine - in reality many people struggle with wifi.
I was plagued by interference issues with wifi whenever the microwave was used and would always use ethernet now as my first preference for stability.
As the house is not wired for ethernet several years ago I tried mains powerline network adapters that are made by many companies.
I use these from Devolo currently:
http://www.devolo.co.uk/consumer/81_dlan-500-avmini_starter-kit_product-pictures _8.html?l=en
They are excellent and you can create a wired network in minutes without running long lengths of cable.
As with wifi they never achieve the highest rated speeds and are dependent on the wiring quality but are more than adequate for HD streaming to multiple AppleTVs.
Many other manufacturers produce these eg Belkin, Netgear etc as well as lesser known brands.
AC

Does the new ISR platform support 802.11ac APs

Hello,
Is there a Cisco WLAN controller that is compatible with the new 11ac 3700 APs that can be installed in a 3900 series ISR platform?
Thank you
James

Yes and no. And I don't know which is which.
The current way to stick a WLC into a router is using an SRE. This is basically a module which contains a hard drive and you create a VM in form of a WLC. Now the latest SRE firmware is 7.4.121.0 (release date 20 December 2013).
There are currently three models of APs with can support 802.11ac. They are the 3600*, 3700 and 2700.
Ok, here's where the "kicker" comes in.
The 3600 (notice the "*") can support 802.11ac if you purchase the 802.11ac Wave 1 Module. The 3600 is supported from firmware version 7.2.X.X but the 802.11ac Wave 1 Module requires a minimum firmware version 7.5.X.X (this version is now "deferred"). So this option doesn't work.
3700 requires a minmum of 7.6.X.X firmware and the newly-released 2700 requires a soon-to-be-released 7.6MR2 or 8.X.X.X firmware.
Now if what I've mentioned above doesn't confuse you, this next one will bewilder absolutely: Read the Release Notes for 7.6.X.X and scroll down to the Supported Cisco Wireless LAN Controller Platforms section and it's stated:
Cisco Virtual Wireless Controllers on Cisco Services-Ready Engine (SRE) or Cisco Wireless LAN Controller Module for Integrated Services Routers G2 (UCS-E)
Hence, my response of Yes and No.
I have two recommendations:
On the bottom of the Release Notes, there's a Feedback link. Use it. Put a low score (this guarantees someone will contact you quickly). When they contact you, ask them to do a proper QC on their documentation because, frankly, they've been "dropping the ball" lately.
Next, contact TAC.
Hope this helps.

Does iPad 4th generation support 802.11ac

Hi, I've just purchased an Airport Extreme 3TB and have an iPad 4th generation. Wanted to know whether the iPad would benefit from 802.11ac?
Thx for your time,
Marco

No iPads currently support 802.11ac, they only support a, b, g, and n

Ap 3700 PoE with PSE that does not support CDP/LLDP power Negotiation

We run into a problem when AP 3700 is connected to an 802.3at PSE
that only supports physical event classification as compliant to 802.3at standard for PSE,
but does not support CDP/LLDP power negotiation.
AP 3700 (I believe the firmware version does not matter much) cannot get enough power after not receiving any CDP/LLDP power negotiation packet. (get no more than 15W power although PSE supports 30W.)

Hi Leo,
Thanks for the information, and do you know if Phihong power injector supports 802.3at LLDP power negotiation or not?
And is there any special configuration on AP3700 side like disabling CDP/LLDP power negotiation to make it to work with such power injector, and what is the command if there is any?
Thanks again, Leo.

What network adaptors support 802.11ac?

I want to purchase the new airport/time capsule mainly for it's 802.11ac capabilities. I have a mid-2009 macbook pro.
Wondering what network adaptors are out there that I can plug into my usb that can support 802.11ac? I found some but they only support Windows.

Newer AC wireless would need to support USB 3 standard but of course that is not available.
I want to purchase the new airport/time capsule mainly for it's 802.11ac capabilities. I have a mid-2009 macbook pro.
You only have one port that is near capable (actually more than capable if real numbers are used) and that is ethernet. So the best device for you is a second Airport Extreme working as bridge or extend wireless in apple terminology.. really it is not such a bad option since the cost of AC usb 3.0 will be over $100 anyway.

Upgrade to new 802.11ac standard

So I'm looking for a new router. Upgrading from an older 802.11g, and looking forward to a nice 802.11N, but now I'm hearing about the newer 802.11ac standard, and I want it. Problem is that even the newest macbook pro is not supporting that. I have an older macbook pro from 2009 that I love and see no good reason to upgrade from. What I'm wanting to know is if I would eventually be able to upgrade my hardware, along with any necessary firmware/software, in order to bring me up to the ac standard, or would I really need to buy a new mac? The latter isn't happening any time soon, but if I could do the former, I'd by the 802.11.ac router now, in readiness for an upgrade.
Oh, and I'm running Lion (10.7.4).
Thanks for any information.

That's too bad. Oh well, I know now to just get the n. Thanks for the reply.

[unixODBC][Driver Manager]Driver does not support this function {IM001}

Hello,
I start from the end and details show below - this error message i got in sql session:
SQL> select count(*) from EnergyType@ENERGOPLAN;
select count(*) from EnergyType@ENERGOPLAN
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[unixODBC][Driver Manager]Driver does not support this function {IM001}
ORA-02063: preceding 2 lines from ENERGOPLAN
SQL>
First question - is Oracle Heterogeneous Services are licensed for standard edition ? I cant find this information, and my database - is SE 11.2.0.3.0 - 64bit.
If its ok and HS are licensed for SE, then please see details of my problem:
----OS and packages version
[oracle@aris_sv_db log]$ uname -a
Linux aris_sv_db 2.6.18-308.24.1.el5 #1 SMP Tue Dec 4 17:43:34 EST 2012 x86_64 x86_64 x86_64 GNU/Linux
[oracle@aris_sv_db log]$
[oracle@aris_sv_db log]$ rpm -qa | grep odbc
[oracle@aris_sv_db log]$ rpm -qa | grep unixodbc
[oracle@aris_sv_db log]$ rpm -qa | grep unixODBC
unixODBC-libs-2.2.11-10.el5
unixODBC-libs-2.2.11-10.el5
unixODBC-devel-2.2.11-10.el5
unixODBC-2.2.11-10.el5
unixODBC-devel-2.2.11-10.el5
[oracle@aris_sv_db log]$ rpm -qa | grep freetds
freetds-0.91-1.el5.rf
[oracle@aris_sv_db log]$
-----ODBC.INI, ODBCINST.INI and FREETDS.CONF
[oracle@aris_sv_db log]$ more /home/oracle/.odbc.ini
[ENERGOPLAN]
Driver = FreeTDS
Servername = ENERGOPLAN
Database = ess2
[oracle@aris_sv_db log]$
[oracle@aris_sv_db log]$ more /etc/odbcinst.ini
# Example driver definitions
[FreeTDS]
Description = MSSQL Driver
Driver = /usr/lib64/libtdsodbc.so.0
#Setup = /usr/lib64/libtdsodbc.so.0
#Driver = /usr/lib64/libodbc.so
#Driver = /usr/lib/libodbc.so
UsageCount = 1
Trace = Yes
TraceFile = /tmp/freetds.log
[ODBC]
DEBUG = 1
TraceFile = /tmp/sqltrace.log
Trace = Yes
[oracle@aris_sv_db log]$
[oracle@aris_sv_db log]$ more /etc/freetds.conf
# A typical Microsoft server
[ENERGOPLAN]
host = 192.168.10.64
port = 1433
tds version = 8.0
# client charset = UTF-8
client charset = cp1251
[oracle@aris_sv_db log]$
----CHECK CONNECT from ODBC
[oracle@aris_sv_db log]$ isql -v ENERGOPLAN user pass
| Connected! |
| |
| sql-statement |
| help [tablename] |
| quit |
| |
SQL> select count(*) from EnergyType;
| |
| 8 |
SQLRowCount returns 1
1 rows fetched
SQL> [oracle@aris_sv_db log]$ tsql -S ENERGOPLAN -U user -P pass
locale is "en_US.UTF-8"
locale charset is "UTF-8"
using default charset "cp1251"
1> select count(*) from EnergyType;
2> go
8
(1 row affected)
1> [oracle@aris_sv_db log]$
----LISTENER.ORA, TNSNAMES and initENERGOPLAN.ora
[oracle@aris_sv_db log]$ more /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
# listener.ora Network Configuration File: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
SID_LIST_ENERGOPLAN =
(SID_LIST =
(SID_DESC=
(SID_NAME=ENERGOPLAN)
(ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1)
(PROGRAM=dg4odbc)
(ENVS="LD_LIBRARY_PATH=/usr/lib64:/u01/app/oracle/product/11.2.0/dbhome_1/lib")
ENERGOPLAN =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = PNPKEY))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.10.72)(PORT = 1523))
ADR_BASE_LISTENER = /u01/app/oracle
[oracle@aris_sv_db log]$ more /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/tnsnames.ora
# tnsnames.ora Network Configuration File: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
ENERGOPLAN =
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.72)(PORT=1523))
(CONNECT_DATA=(SID=ENERGOPLAN))
(HS=OK)
[oracle@aris_sv_db log]$ more /u01/app/oracle/product/11.2.0/dbhome_1/hs/admin/initENERGOPLAN.ora
# This is a sample agent init file that contains the HS parameters that are
# needed for the Database Gateway for ODBC
# HS init parameters
HS_FDS_CONNECT_INFO = ENERGOPLAN
#HS_FDS_CONNECT_INFO = 192.168.0.199:1433//test
HS_FDS_TRACE_LEVEL = DEBUG
#HS_FDS_TRACE_FILE_NAME = /tmp/hs1.log
HS_FDS_TRACE_FILE_NAME = /u01/app/oracle/product/11.2.0/dbhome_1/hs/log/mytrace.log
HS_FDS_SHAREABLE_NAME = /usr/lib64/libodbc.so #/usr/lib64/libtdsodbc.so.0
#HS_FDS_SHAREABLE_NAME = /usr/lib64/libtdsodbc.so.0
#HS_FDS_SHAREABLE_NAME = /usr/lib/libodbc.so
#HS_LANGUAGE=american_america.we8iso8859p1
#HS_LANGUAGE=AMERICAN_AMERICA.AL32UTF8
#HS_LANGUAGE=AMERICAN_AMERICA.CL8MSWIN1251
#HS_LANGUAGE=RUSSIAN_RUSSIA.UTF8
#HS_LANGUAGE=Russian_CIS.AL32UTF-8
#HS_FDS_FETCH_ROWS=1
HS_NLS_NCHAR = UCS2
HS_FDS_SQLLEN_INTERPRETATION=32
# ODBC specific environment variables
set ODBCINI=/home/oracle/.odbc.ini
set ODBCINSTINI=/etc/odbcinst.ini
#HS_KEEP_REMOTE_COLUMN_SIZE=ALL
#HS_NLS_LENGTH_SEMANTICS=CHAR
#HS_FDS_SUPPORT_STATISTICS=FALSE
# Environment variables required for the non-Oracle system
#set <envvar>=<value>
[oracle@aris_sv_db log]$
[oracle@aris_sv_db log]$ tnsping ENERGOPLAN
TNS Ping Utility for Linux: Version 11.2.0.3.0 - Production on 01-APR-2013 16:27:49
Copyright (c) 1997, 2011, Oracle. All rights reserved.
Used parameter files:
/u01/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.72)(PORT=1523)) (CONNECT_DATA=(SID=ENERGOPLAN)) (HS=OK))
OK (0 msec)
[oracle@aris_sv_db log]$
----CREATE DBLINK and test from sqlplus
CREATE DATABASE LINK "ENERGOPLAN" CONNECT TO "user" IDENTIFIED BY "pass" USING 'ENERGOPLAN';
[oracle@aris_sv_db log]$ sqlplus / as sysdba
SQL*Plus: Release 11.2.0.3.0 Production on Mon Apr 1 16:30:14 2013
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Release 11.2.0.3.0 - 64bit Production
SQL> select count(*) from EnergyType@ENERGOPLAN;
select count(*) from EnergyType@ENERGOPLAN
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[unixODBC][Driver Manager]Driver does not support this function {IM001}
ORA-02063: preceding 2 lines from ENERGOPLAN
SQL>
----logs from hs and odbc
[oracle@aris_sv_db log]$ tail -50 ENERGOPLAN_agt_12117.trc
12 VARCHAR N 100 100 0/ 0 1000 0 200 ConsumptionYearCostUOM
3 DECIMAL N 24 24 9/ 3 0 0 0 ConsumptionYearFactorAmount
-7 BIT N 1 1 0/ 0 0 0 20 NeedToBeApprovedByREK
Exiting hgodtab, rc=0 at 2013/04/01-16:30:42
Entered hgodafr, cursor id 0 at 2013/04/01-16:30:42
Free hoada @ 0x14e5fd20
Exiting hgodafr, rc=0 at 2013/04/01-16:30:42
Entered hgopars, cursor id 1 at 2013/04/01-16:30:42
type:0
SQL text from hgopars, id=1, len=36 ...
00: 53454C45 43542043 4F554E54 282A2920 [SELECT COUNT(*) ]
10: 46524F4D 2022454E 45524759 54595045 [FROM "ENERGYTYPE]
20: 22204131 [" A1]
Exiting hgopars, rc=0 at 2013/04/01-16:30:42
Entered hgoopen, cursor id 1 at 2013/04/01-16:30:42
hgoopen, line 87: NO hoada to print
Deferred open until first fetch.
Exiting hgoopen, rc=0 at 2013/04/01-16:30:42
Entered hgodscr, cursor id 1 at 2013/04/01-16:30:42
Allocate hoada @ 0x14e5fd80
Entered hgodscr_process_sellist_description at 2013/04/01-16:30:42
Entered hgopcda at 2013/04/01-16:30:42
Column:1(): dtype:4 (INTEGER), prc/scl:10/0, nullbl:1, octet:0, sign:1, radix:0
Exiting hgopcda, rc=0 at 2013/04/01-16:30:42
Entered hgopoer at 2013/04/01-16:30:42
hgopoer, line 231: got native error 0 and sqlstate IM001; message follows...
[unixODBC][Driver Manager]Driver does not support this function {IM001}
Exiting hgopoer, rc=0 at 2013/04/01-16:30:42
hgodscr, line 407: calling SQLSetStmtAttr got sqlstate IM001
Free hoada @ 0x14e5fd80
hgodscr, line 464: NO hoada to print
Exiting hgodscr, rc=28500 at 2013/04/01-16:30:42 with error ptr FILE:hgodscr.c LINE:407 FUNCTION:hgodscr() ID:Set array fetch size
Entered hgoclse, cursor id 1 at 2013/04/01-16:31:24
Exiting hgoclse, rc=0 at 2013/04/01-16:31:24
Entered hgocomm at 2013/04/01-16:31:24
keepinfo:0, tflag:1
00: 4F52434C 2E343535 32623466 342E362E [ORCL.4552b4f4.6.]
10: 32322E37 363237 [22.7627]
tbid (len 20) is ...
00: 4F52434C 5B362E32 322E3736 32375D5B [ORCL[6.22.7627][]
10: 312E345D [1.4]]
cmt(0):
Entered hgocpctx at 2013/04/01-16:31:24
Exiting hgocpctx, rc=0 at 2013/04/01-16:31:24
Exiting hgocomm, rc=0 at 2013/04/01-16:31:24
Entered hgolgof at 2013/04/01-16:31:24
tflag:1
Exiting hgolgof, rc=0 at 2013/04/01-16:31:24
Entered hgoexit at 2013/04/01-16:31:24
Exiting hgoexit, rc=0
[oracle@aris_sv_db log]$
[oracle@aris_sv_db log]$ tail -50 /tmp/sqltrace.log
Native = 0x7fff6ca974f4
Message Text = 0x14e5f968
Buffer Length = 510
Text Len Ptr = 0x7fff6ca97750
[ODBC][12117][SQLGetDiagRecW.c][582]
Exit:[SQL_SUCCESS]
SQLState = IM001
Native = 0x7fff6ca974f4 -> 0
Message Text = [[unixODBC][Driver Manager]Driver does not support this function]
[ODBC][12117][SQLGetDiagRecW.c][540]
Entry:
Statement = 0x14e399f0
Rec Number = 2
SQLState = 0x7fff6ca97700
Native = 0x7fff6ca974f4
Message Text = 0x14e5f908
Buffer Length = 510
Text Len Ptr = 0x7fff6ca97750
[ODBC][12117][SQLGetDiagRecW.c][582]
Exit:[SQL_NO_DATA]
[ODBC][12117][SQLEndTran.c][315]
Entry:
Connection = 0x14dbd4b0
Completion Type = 0
[ODBC][12117][SQLGetInfo.c][214]
Entry:
Connection = 0x14dbd4b0
Info Type = SQL_CURSOR_COMMIT_BEHAVIOR (23)
Info Value = 0x7fff6ca9781e
Buffer Length = 8
StrLen = 0x7fff6ca9781c
[ODBC][12117][SQLGetInfo.c][528]
Exit:[SQL_SUCCESS]
[ODBC][12117][SQLEndTran.c][488]
Exit:[SQL_SUCCESS]
[ODBC][12117][SQLDisconnect.c][204]
Entry:
Connection = 0x14dbd4b0
[ODBC][12117][SQLDisconnect.c][341]
Exit:[SQL_SUCCESS]
[ODBC][12117][SQLFreeHandle.c][268]
Entry:
Handle Type = 2
Input Handle = 0x14dbd4b0
[ODBC][12117][SQLFreeHandle.c][317]
Exit:[SQL_SUCCESS]
[ODBC][12117][SQLFreeHandle.c][203]
Entry:
Handle Type = 1
Input Handle = 0x14dbb0c0
[oracle@aris_sv_db log]$

To see which ODBC function DG4ODBC is looking for and unixODBC isn't supporting it would be best to get an ODBC trace file. But as your unixODBC driver (unixODBC-2.2.11-10.el5) is outdated and these old drivers had a lot of issues when being used on 64bit operating systems (for example wrong sizeofint etc). So best would be to update the unixODBC Driver manager to release 2.3.x. More details can be found on the web site: www.unicodbc.org
- Klaus

I am unable to install photoshop elements13 due to an error. it shows no error code but does say - This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements.

i am unable to install photoshop elements13 due to an error. it shows no error code but does say - This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements.

download the 64bit installer,
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Preview does not support PDF features

I have generated a number of PDF files in Adobe Acrobat that are questionnaires. The intent is to have the users fill out forms, click radio buttons and check boxes within the PDF and using buttons embedded on the questionnaire email them back to me. I have run into many problems with my questionnaires by Mac OSX users. It turns out when they open my Questionnaire (PDF) Preview launches instead of Adobe Reader. Evidentially Preview is the default application for PDFs. Preview does not support "calculations" "actions" for buttons including "submit a form" and does not auto font size in the forms they fill out.
Is there something in Preview that causes this issue that preview users need to do? It clearly appears Preview is not a good substitute for Abode Reader that is free and the standard for PDF viewing.

Bobbbo wrote:
The issue I have run into is that Adobe has generated a way that you can distribute forms to a large group of people, they can in return send back the data that they filled out. Acrobat can then tabulate the data automatically. It is a very powerful tool.
I don't doubt it. However, it is a purely Acrobat solution. I'm sure there is other software that can do the same thing. Have you considered a web site instead? You could build an HTML page to distribute to people and it would have all the same features. Plus, it would work with any web browser.
The problem I have is Apple has decided to make Preview their default PDF reader application. When a Mac users opens the PDF file things may not work and they do not understand why. They get frustrated and quit filling out the form, therefore locking out getting data from all Mac users. This is an unnecessary burden to put on Mac users!
Then why don't you pick a method that would work with a stock MacOS X machine?
Adobe Reader is free so why compete with a free application??
Adobe Reader is free for end users to download. If Apple included it as part of MacOS X, the would have to pay Adobe many millions of dollars. Furthermore, while Acrobat Reader does have many nice features, it is a slow, bloated behemoth that fewer and fewer people want to use anymore. That is why there are so many other PDF viewers these days - people don't like Acrobat Reader.
I just think they should not have a fully functional PDF reader as the default application for PDFs.
Preview is fully functional. But Apple can't read Adobe's mind and support every new feature that Adobe throws in to try to keep customers. Your PDF solution is an Adobe solution. Adobe software just isn't as ubiquitous as it used to be. Times change. I suggest you look into some other method of form distribution, such as HTML and Javascript.

VWLC does not support 802.11ac standard?

Similar Messages

Maybe you are looking for