VWLC WLAN creation profile issue

Hi,
I`m implementing a virtual wireless LAN controller and I`m getting problem to create WLAN profile. Follow the logs:
*spamReceiveTask: Jan 22 11:42:50.510: #LWAPP-3-WLAN_ERR2: spam_lrad.c:52448 The system is unable to find WLAN 1 to be deleted; AP XX:XX:XX:XX:XX:XX
*emWeb: Jan 22 11:42:50.501: #LOG-3-Q_IND: spam_lrad.c:52448 The system is unable to find WLAN 1 to be deleted; AP XX:XX:XX:XX:XX:XX[...It occurred 3 times.!]
Any idea?
Thanks,
Rodrigo

Similar Messages

Assigning Creation Profile in the Vendor Master

Help needed to find the release "Creation Profile" in the Vendor Master. I am not able to locate the input box in the Vendor Master "Purchasing Data" Tab.
Already tried:
Extras >> additional purchasing data >> data retention at plant level
Purchasing view >> Extras >> Alternate data for a plant
- the "Creation profile parameter is not there
Any help is appreciated.

Thanks for your reply. I should clarify the issue once again.
Problem Clarified
"Release Creation Profile" already exists (defined) in IMG and I need to assign it to a vendor in the Vendor Master on the "Dif. Purchase Data" which is plant specific. I couldn't find the field "Creation Profile" in any of the purchasing data.

How to create Creation Profile

Hello all Gurus,
Can someone please tell me how to create "Creation Profile" and use them in MM scheduling agreement? I have an issue, where the user wants 2 separate creation profiles to be created so that the demands should be sent to suppliers on Thursdays and Fridays only. I maintained the creation profiles in SPRO -- MM -- Purchasing -- Scheduling Agreement -- Maintain Creation Profile for Scheduling agreement with rel. doc. But these creation profiles doesn't seems to work. What are the extra steps that we need to carry out once the creation profiles are created and then maintained in MM scheduling agreement?
If you have any knowledge on creation of CREATION PROFILES please share it with me. It will be very much helpful for me.
Thanks and Regards,
Umakanth

hi,
Go to SPRO > MM > Purchasing > Scheduling Agreement > Maint. Rel. Creation Profile for Sched. Agmt. w. Rel. Docu.
Maint. Rel. Creation Profile for Sched. Agmt. w. Rel. Docu.
In this step, you can define the release creation profile.
The latter is an instrument for determining which criteria are used to generate releases against a scheduling agreement and transmit them to the vendor.
You assign the creation profile to the scheduling agreement item in the additional data.
The creation profile controls the creation periodicity of the releases and - starting from the current date of release creation - the way in which the quantities are aggregated.
In the release creation profile, you can define
o   General Parameters
-   Which creation strategy is the basis for JIT delivery schedules and scheduling agreements.
-   How backlog and immediate requirements are taken into account during release creation.
o   Aggregation and release horizon
-   If and how schedule lines should be aggregated during release creation.
o   Release creation periodicity
-    With which periodicity scheduling agreement releases are created
o   Tolerance profile
-    That for releases created as a result of changed schedule lines, the system performs a tolerance check
o   Internet release
-    Whether an Internet release is created during release creation

Creation profile with required parameters

Please can anyone tell me how to create the new creation profile with the following parameters: Delivery on Thursday and creation on Wednesday.

Hi,
Settings for the Creation Profile
You make the following settings in Customizing for Purchasing under Scheduling Agreement ® Maintain Release Creation Profile for Scheduling Agreement with Release Documentation.
General Parameters
For JIT delivery schedules, you select Changed or next date. For forecast (FRC) delivery schedules, you select Next date only.
For JIT schedules, you specify that backlogs and immediate requirements are determined.
Aggregation Horizons
For JIT schedules, you specify daily aggregation and enter 10 workdays as End. For FRC schedules, you choose monthly aggregation and enter 180 workdays as End.
This has the effect that JIT delivery schedules show the daily quantities for the next 10 workdays and FRC schedules the monthly quantities for the next 180 workdays (9 months à 20 workdays).
Creation Periodicity
You specify weekly creation for JIT schedules and monthly creation for FRC schedules.
Tolerance Profile
You specify 10 days as the checking period for JIT schedules, since this corresponds to the release horizon. You enter 5% as upper and lower tolerance limits and choose Overall check.
In your case JIT SCHEDULE IS VALID. I hope this will clear your issue.

Creation profile with weekly aggregation

Hello amigos!!
I created a creation profile for foreign suppliers by doing weekly aggregations.
I have the following problem... for de deliveries from today to the future the print layout show the aggregation weekly (weekly format), that is fine.
But the deliveries in the past the print layout show them with day format. And is also required in Week format.
what I missed? what I need to do to fix it=

Hi,
Settings for the Creation Profile
You make the following settings in Customizing for Purchasing under Scheduling Agreement ® Maintain Release Creation Profile for Scheduling Agreement with Release Documentation.
General Parameters
For JIT delivery schedules, you select Changed or next date. For forecast (FRC) delivery schedules, you select Next date only.
For JIT schedules, you specify that backlogs and immediate requirements are determined.
Aggregation Horizons
For JIT schedules, you specify daily aggregation and enter 10 workdays as End. For FRC schedules, you choose monthly aggregation and enter 180 workdays as End.
This has the effect that JIT delivery schedules show the daily quantities for the next 10 workdays and FRC schedules the monthly quantities for the next 180 workdays (9 months à 20 workdays).
Creation Periodicity
You specify weekly creation for JIT schedules and monthly creation for FRC schedules.
Tolerance Profile
You specify 10 days as the checking period for JIT schedules, since this corresponds to the release horizon. You enter 5% as upper and lower tolerance limits and choose Overall check.
In your case JIT SCHEDULE IS VALID. I hope this will clear your issue.

Lion Server 802.1x WLAN System Profile

Hello skilled guys in the community :-)
Today I would need some kind of how-to about configuring Lion clients into a Lion Server 802.1x WLAN network. As I am currently setting everything up from scratch in my home/lab environment here the bits and pieces I have already successfully up and running:
DHCP
DNS
Open Directory Master
Profile Manager
The next I've done is to activate the Radius service in the server which first of all asks me for the certificate. There was only one and this was the one created from the Open Directory wizard. As the root certificate of this certificate should be already installed in managed clients (done by joining to the Profile Manager) workstations should already trust this certificate and there should be no issue.
Question here: Can this certificate be used and am I on the right way or should I create an own certificate for this? Is yes, how?
After many hours of playing around with the radius server and my access point (3COM 9552) I finally got it working and I could connect to my 802.1x network by just providing OD username and password.
Question here: When adding a new radius client there are four fields in the dialog box: Name (should be clear), IP (more than clear), the shared secrect (also not a problem) and the type. As this type is not a drop down field but just a text box I was wondering quite a while what the server expects from me to put in there. I decided to write there 'other' as this was the only option I could find from googling. Is this correct?
As next step I would like to configure a WLAN System profile using Profile Manager. So a WLAN connection which is up even though nobody is logged into the machine.
Question here: Can anybody help me with this. I had a look into this config dialog in Profile Manager but could not get any clue of System Profile and also don't know what else I need to configure there. I also see that I need to configure a name and password but don't understand why I need this. For my understanding the client machines (especially with System Profile) should use there the machine name and password (COMPUTERNAME$) as I created a trusted bind to OD. Or is it rather so that I need to create a dedicated account for WLAN connection with a not expireing password suitable long? What kind of things I have to configure also in there? Trusts, Authentication?
Thank you already for your help. I'm happy to get the Radius authentication now working. Now would be happy getting rid of the rest of the question marks.
Cheers
Robert

Any ideas here??
In profile manager I also saw the option authenticate with computer credentials. I belief for this it's needed to have a trusted bond to OD like I have. But when I configure it (TTLS with computer name and password) WLAN never gets connected.
Any idea on this. Also where can I see that the profile is made as a system profile. The only tick box I've found is for the logon window authentification which is far to late for me to establish any WLAN connection.
Thanks.

Creation Profile in Scheduling Agreement and Schedule LIne

Dear Experts,
Currently I'm working on Scheduling Agreement and Schedule Line.In standard SAP gives the provision of creation profile.I've gone through the SAP help documentation but I'm not clear on that.I've few doubts on creation profile.
1. I've created a profile say XXXX for 14 days JIT and 6 months Forecast.And I maintain the same on Scheduling Agreement additional data.
2.I'm creating delivery schedule respect ot Scheduling agrrement.
3. I maintain the aggregation horiozon in creation profile as 10 days daily aggregation for JIT and 120 days for monthly aggregation for forecast.
4.I run MRP for the header material and I maintain the necessary SA number in Source list.
5. After MRP run I'm not getting the respective schedule lines for JIT and Forecast.
6. What is the use of creation profile in Scheduling Agrrement and schedule line and is it determine ant schedule lines after MRP run.
Please clarify me on creaion profile.
Thanks in advance
PKB

Dear Experts,
I'm not getting any response regarding Creation profile which I posted last week.
Can anybody explain me the use of Creation profile in Schedule line?
From Standard SAP help documentation I'm not convince.
Best Regards
PKB

Creation profile based schedule lines

Dear all,
I release the Forcasting schedules based on the creation profile assign to the Scheduling agreement (Lpa)
In the creation profiel i have maintained the Aggegation horizon as 0-60 (days), 60-90(weeks) and 60-999 (months).
after release when i checked the schedules the aggegation is not properly.
how system caculated the the aggegation whether it consider the working day only or calender days
2. what is mean by creation indicator -R ( real time) B - mrp driven

Hi,
It depends upon the Planning Calendar specified in Creation profile customization.
R- Realtime means using ME38
MRP driven is self explanatory and are created by MRP when the source is fixed in sourcelist and MRP indicator maintained.
Hope this helps.

Creation Profile in Scheduling Agreement

Dear Experts,
Currently I'm working on Scheduling Agreement and Schedule Line.In standard SAP gives the provision of creation profile.I've gone through the SAP help documentation but I'm not clear on that.I've few doubts on creation profile.
1. I've created a profile say XXXX for 14 days JIT and 6 months Forecast.And I maintain the same on Scheduling Agreement additional data.
2.I'm creating delivery schedule respect ot Scheduling agrrement.
3. I maintain the aggregation horiozon in creation profile as 10 days daily aggregation for JIT and 120 days for monthly aggregation for forecast.
4.I run MRP for the header material and I maintain the necessary SA number in Source list.
5. After MRP run I'm not getting the respective schedule lines for JIT and Forecast.
6. What is the use of creation profile in Scheduling Agrrement and schedule line and is it determine ant schedule lines after MRP run.
Please clarify me on creaion profile.
Thanks in advance
PKB

Dear Experts,
I'm not getting any response regarding Creation profile which I posted last week.
Can anybody explain me the use of Creation profile in Schedule line?
From Standard SAP help documentation I'm not convince.
Best Regards
PKB

Where is the field release creation profile in scheduling agreement?

Dear experts,
I need to maintain release creation profile in Scheduling Agreement.
please let me know where can I find this field in ME31L
Regards,
Shashidhar

Found in More functions - Item details

Creation profile settings for Scheduling Agreement

Hi Experts,
I have a question regarding parameters of Creation profile maintained in Scheduling Agreement.
In ‘General Parameters’, the Forecast delivery schedules there exists a parameter ‘FRC:Aggregation’.
I would like to know about the significance of using option ‘3’ as ‘FRC:Aggregation’ parameter in creation profile.
Please provide some details regarding usage of above said Aggregation parameter in Creation profile.
Thank you.
Best Regards,
Ashok

If you work with release creation periodicity and planning calendar (lets say delivery schedule every Friday) there might be schedule lines in between and these were aggregated to this fixed day.
Best regards,
Hans

My macbook pro was repaired and since then i can't get nor photoshop or bridge to initialize. a window appears that says it has initializing problems due to an icc profile issue.

my macbook pro was repaired and since then i can't get nor photoshop cs5 or bridge cs5 to initialize. a window appears that says it has initializing problems due to an icc profile issue.
there appear two error messages. the first one says that there has been a problem sincronizing because of a programme error. the second one appears after you clicked ok on the first window and says that photoshop couldn't be initialized because the icc profile is invalid.
does anyone know if i have to delete any system or photoshop preference? the illustrator is also having troubles. thanks

thanks! what finnally worked better was renaming the «settings» folder in te «color folder» in the library with ~before the name. now indesign is asking me for thw icc profiles but still works, so i asume i can reinstall color settings only for indesign and go on.

Mappings Creation Performance Issue:

Mappings Creation Performance Issue
I am having a performance problem when linking attributes from Splitter Transformation (has app. 80 input ports and 9 different filter condition for 9 target tables) to other transformations. It takes app. 6 minutes to link one attribute from Splitter Transformation to other transformations; generally it should take less than a second. This is the problem only with Splitter Transformation, other transformations works very well.
Any thoughts on this will be very helpful.
Thanks
Ragu Mandala

Ragu,
Unfortunately this issue was introduced in 9.0.3.36.3 (lower versions did not have this... 'feature'). The issue has been rolled into the 9.2.0.3 version, but there is no backport for 9.0.3.
Any chance you can migrate to 9.2? or go back to 9.0.3.35?
Mark.

Colour Profile issues between North America and Europe

I have a corporate colour, C80M80Y0K0 which creates a very attractive shade of purple. Within North America all printouts demonstrate very similar variations of that purple colour. We have an office in UK that uses the same collateral pieces. While they preview correctly on screen, they are unable to reproduce that purple in their office or with their professional suppliers (all digital processes). The resultant colour is blue (approx C92M68Y18K0).
The files are created in Indesign, using a process colour within Indesign, and then exported to a PDF and shared with the UK office.
My guess is that it is a colour profile issue - has anyone else had this same issue, and if it is indeed a colour profile issue, what profile would you recommend using? I've tried using some of the other default profiles within Indesign but with no luck.
Any assistance would be really appreciated.

The resultant colour is blue (approx C92M68Y18K0).
What preset are you using for the Export, or what are the Output settings? Have you tried PDF/X?
PDF/X-4 will leave color unchanged and profile everything, so a color change like you are describing most likely means the wrong output profile is being used in the UK.
PDF/X-1a forces everything into your doc's CMYK space and makes conversions at output less likely—with X-1a your 80|80|0|0 mix will probably be output unchanged.

Creation Profile

Hi,
My 'Creation Profile' field under SPRO > Materials Management > Puchasing > Scheduling Agreement > Define Screen Layout at Document Level > LPL > Scheduling control is missing/not appear on the screen. Anyone know why?
I have already maintained the Creation Profile.
Thanks,
Anson

Hi,
I can view Scheduling Control in Screen Layout at Document Level of SA. Consult your Basis Consultant.
Regards,
Biju K

VWLC WLAN creation profile issue

Similar Messages

Maybe you are looking for