VXI-MXI-2 missing in resource manager
Hello,
I have a VXI-MXI-2 and I configure the A16 write posting to enable. After that i can not work with VXI-MXI-2.
When resman run, it found a instrument at address 1 but got a Generic I/O error on VXI D16 peek.
I try to set all jump status to default and set the U35 Restore Factory Configuration to Yes. it is the same.
How do i fix this problem?
My Friend.
I understood your frustration totally. I got the same problem. There is not much you can do about it. Probably you won’t like my solution either. It is very painful experiences. Are you ready? Here is the solution.
Reinstall all of your software.
Yes, Reinstall it. The whole thing, LabVIEW, Drivers, and etc. But you must uninstall first.
If it does not work, change the computer.
The system should run and found the device. It may takes you a couple of days to do it. But it should work.
I ran into this issue a few times. Every time I end it up uninstall and reinstall every thing. And it runs without any problems.
Similar Messages
-
I have multi test stations with a PC runing Windows XP, each configured with an NI PCI-MXI-2 Card. Each station has two VXI Chassis, each with it's own Slot-0 controller, daisy-chained to run off the same VXI System, which the system identifies as VXI0.
When I build a new station, I ghost a Hard Drive from an existing station and use that in the new station. The ghosted drive works fine on the station from which it was created. On a new station with a ghosted drive when I open up MAX, I see two VXI systems listed...VXI0 and VXI1. VXI0 is listed but not recognized (i.e. I can't talk to it). VXI1 appears to be recognized by MAX, but not by NI-VISA. (I can't open up a VISA session from either MAX or VIC).
I can delete VXI0 and rename VXI1 to VXI0, but VISA still can't talk to it. Also, Resman reports still think the hardware resides on VXI1.
I get similar problems with NI-GPIB cards. In this case, I believe each PCI GPIB card has it's unique Serial Number encoded in it's ID, so when I move drives from one station to another, I'm able to successfully delete GPIB0 and rename and then used GPIB1 to GPIB0 and all works fine. It appears the same approach does not work on my PCI MXI card.
Is there something else I need to do to re-identify the newly found VXI1 to VXI0? I have multiple files that expect all my instruments to be located on VXI0.
Solved!
Go to Solution.Hello TomMcG,
I believe the issue you are seeing with ghosting a hard drive and moving it to a new station is that it is carrying over the Measurement & Automation Explorer (MAX) configuration with the VXI0 configuration, and the current configuration of the chassis plugged in does not match the previous one from thus it creates a new resource name called VXI1. I would like you to delete VXI1and VXI0 from Measurement & Automation Explorer, and then uninstall the VXI driver for the VXI-MXI 2 from the Device Manager. This will dissociate the driver from the hardware and not allow you to detect this hardware in MAX. Then when your restart your machine the association will be reinstated and (since there is no VXI0 in MAX) be titles VXI0 in MAX. You can access the device manager via Start>> (Right Click on) Computer and select manage. Then navigate to Device Manager underneath Computer Management>>Systems Tools>>Device Manager. Check to make sure the VXI Bus/devices is there, then right click on the MXI 2 module and click uninstall. You will have to restart your computer in order for the connection and software to be reinstated. Hopefully this will allow the VXI to re-identify the newly found VXI1 as VXI0. Also when you attempt to use Visa Interactive Control (VIC) does it throw you an error?
Regards,
Izzy O.
Applications Engineer
National Instruments -
I have the following configuration:
VXI-PCI system (National Instrument 777119-32 VXI-PCI 8015 interface kit +
National Instrument 777178-01 mainframe extender.)
One PC.
Two VXI cages.
In the first VXI cage at slot 0, I installed NI zero slot controller,
configured to logical address 1.
In the second VXI cage at slot 0, I installed NI zero slot controller,
configured to logical address 2.
The VXI cages are chained using MXI-2/M3 cable.
In the first VXI cage at slot 1, I installed a RACAL Instrument (1260-35
with option OPT-01T) that also needs a logical address, configured to
logical address 3.
In the second VXI cage at slot 1, I installed a RACAL Instrument device
(1260-45 with option OPT-01T) that also needs a logical addre
ss, configured
to logical address 4.
Running the Resource manager with only one RACAL device in either cage -
result OK (logical addresses 1,2,3 or 1,2,4).
Running a full system result - FAIL with the message "The device at logical
address 3 did not respond to the read protocols command.
The same problem appears if I configure the logical address of the OPT-01T
to 255 (auto assign logical address).
Please advice.
Thanks
Eli Nachumzon
ATE Development
Engineering Dept.
ADC teledata
Tel: +972-9-9591453
Fax: +972-9-9591805
E-mail: [email protected]Eli-
I just noticed this unanswered question. I am guessing you've gotten your answer from another source by now, but in case anyone else has similar issues, I recommend our Logical Address Wizard, which helps configure multi-chassis MXI systems. Your case illustrates a common mistake when assigning LA's; having your two VXI-MXI-2's at LA 1 and 2 will not work. According to the LA Wizard, a combination like LA 4 (containing an instrument at LA 5) and LA 6 (containing an instrument at LA 7) would work.
-Scot -
I am using TCP/IP in LabVIEW to work with a VXI PC from a Sun Workstation. Sometimes the VXI Resource Manager gets a little lost and cannot talk to VXI instruments after a few errant calls. I have to stop a VXI Server software app on the PC, run the VXI Resource Manager from Max, and then restart the VXI Server software. Is there anyway to run VXI Resource Manager from command line or from LabVIEW? I searched around for it but could not find it. Thanks.
Hello,
On a windows machine, Resman.exe is located in: C:\Program Files\National Instruments\VXI; on Linux it is in /usr/local/nainst/nivxi/bin and is simply called resman. Can you use the "find" or "locate" commands to find resman on the SUN machine? I think proper syntax would be:
find / -name resman
or
locate resman
With the location information, I think you should be able to write a program on the VXI PC side which launches Resman programmatically.
If you have any further questions or have trouble, repost and we'll continue to explore it!
Thank you,
Best Regards,
JLS
Best,
JLS
Sixclear -
NI VXI Resource Manager keeps on saying locked up
Whenever I run resource manager, it keeps saying it locks up last time when it was running although it was not really locked up last time. Anybody knows how to fix this? Thanks.
I have some additional information and questions regarding this issue.
What version of NI-VISA and MAX do you have installed? There is
an issue with MAX 4 and Resman crashing when run outside of MAX.
A patch for this issue is on our website. However, I have never seen the issue this patch fixes not hang Resman. So my guess is that this is not what is happening in your case since you say it works for a month or so.
What happens when you run Resman twice in a row? Do you get the
hang message the second time? If you do, it's likely that you
have a registry permission problem. To detect lockups, Resman
writes a value to the registry when it starts, and deletes it just
before it exits. If the registry value is still present when
Resman starts, it says it detected a lockup. Thus if the key has
been created but not deleted due to registry permissions problems,
Resman will -always- say it locked up. Are you logged in as
Administrator? What permissions do you have on the computer?
Robert Mortensen
Software Engineer
National Instruments -
I am a QA & ISO Compliance professional with no knowledge and experience in SAP, but i am looking forward to become a SAP professional. Based on my experience with ISO 14001 (Environment Management) & ISO 50001 (Energy Management) i am interested in ENERGY & ENVIRONMENTAL RESOURCES MANAGEMENT option, but i am not curious to know about the path towards the mentioned goal. I also have a degree in mechanical engineering. I have following questions:
Is an IT background or knowledge of programming a pre-requisite ?
What module would "ENERGY & ENVIRONMENTAL RESOURCES MANAGEMENT" be under ?
Before going in for training and certification, what i should study or be prepare with ?
Is the road-map (Below) all i have to follow ?
https://training.sap.com/ca/en/curriculum/ehs_compliance-sap-ehs-management--environmental-compliance-g-en
Any help and information will be immensely appreciated !have you checked personnel profile? with CONFIGPROFILE = EDIT? http://help.sap.com/erp_hcm_ias_2012_01/helpdata/en/92/b073fb42b347af9cb19299881b379d/content.htm http://help.sap.com/erp2005_ehp_05/helpdata/en/48/164bbbb68a4b37b62ad9777b9b449f/content.htm?frameset=/en/48/164bbbb68a4b37b62ad9777b9b449f/frameset.htm¤t_toc=/en/4f/b9088db1034075a337c537083539da/plain.htm&node_id=141 No you cant make changes unless you have a WF step in your processes and forms which allows you to make changes during the cycle of approval Once completed, you can only reinitiate and it ll trigger WF etc. ie HR admin step, where they check all the information is there in the form and then only allows it to be updated to the Infotype and complete the process. did you check scase with the required roles as indicated above? run su53 for missing any authorization?
-
MQSeries as a Transactional Resource Manager with Weblogic Server
I am trying to setup the example given in the BEA white paper:
Using MQSeries as a Transactional Resource Manager with Weblogic Server.
Version 1.
October 25, 2001.
I followed the instructions given in the documents, but when i run client program
>java MQClient t3://localhost:7001 "MQSeries test"
I received the following exception below. Does anyone how what is the reason for
this exception(s) and how i can solve the problem? My MQSeries Server and Weblogic
6.1 sp2 are installed on seperate NT machines. I installed the MQSeries classes
for java and the MQSeries classes for Java Message Service on the weblogic
server machine.
sending: "MQSEries test"
Exception in thread "main" java.rmi.ServerError: A error occurred the server; ne
sted exception is:
java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
Start server side stack trace:
java.rmi.ServerError: A error occurred the server; nested exception is:
java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1312)
at java.lang.Runtime.loadLibrary0(Runtime.java:749)
at java.lang.System.loadLibrary(System.java:820)
at com.ibm.mq.server.MQSESSION$1.run(MQSESSION.java:179)
at java.security.AccessController.doPrivileged(Native Method)
at com.ibm.mq.server.MQSESSION.<clinit>(MQSESSION.java:175)
at com.ibm.mq.MQSESSIONServer.getMQSESSION(MQSESSIONServer.java:67)
at com.ibm.mq.MQSESSION.getSession(MQSESSION.java:329)
at com.ibm.mq.MQManagedConnectionJ11.<init>(MQManagedConnectionJ11.java:
149)
at com.ibm.mq.MQBindingsManagedConnectionFactoryJ11._createManagedConnec
tion(MQBindingsManagedConnectionFactoryJ11.java:139)
at com.ibm.mq.MQBindingsManagedConnectionFactoryJ11.createManagedConnect
ion(MQBindingsManagedConnectionFactoryJ11.java:157)
at com.ibm.mq.StoredManagedConnection.<init>(StoredManagedConnection.jav
a:80)
at com.ibm.mq.MQSimpleConnectionManager.allocateConnection(MQSimpleConne
ctionManager.java:150)
at com.ibm.mq.MQQueueManager.obtainBaseMQQueueManager(MQQueueManager.jav
a:666)
at com.ibm.mq.MQQueueManager.construct(MQQueueManager.java:615)
at com.ibm.mq.MQQueueManager.<init>(MQQueueManager.java:436)
at com.ibm.mq.MQSPIQueueManager.<init>(MQSPIQueueManager.java:52)
at com.ibm.mq.jms.MQConnection.createQM(MQConnection.java:1067)
at com.ibm.mq.jms.MQConnection.createQMXA(MQConnection.java:757)
at com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:209)
at com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:78)
at com.ibm.mq.jms.MQXAQueueConnection.<init>(MQXAQueueConnection.java:46
at com.ibm.mq.jms.MQXAQueueConnectionFactory.createXAQueueConnection(MQX
AQueueConnectionFactory.java:53)
at weblogic.jms.foreign.mqseries.WrapMQXAQueueConnectionFactory.createXA
QueueConnection(WrapMQXAQueueConnectionFactory.java:29)
at MQSeriesHelperImpl$JMSObject.<init>(MQSeriesHelperImpl.java:237)
at MQSeriesHelperImpl.bridgeWLS2MQS(MQSeriesHelperImpl.java:125)
at MQSeriesHelperImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.jav
a:267)
at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest
.java:22)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
End server side stack trace
; nested exception is:
java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
Start server side stack trace:
java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1312)
at java.lang.Runtime.loadLibrary0(Runtime.java:749)
at java.lang.System.loadLibrary(System.java:820)
at com.ibm.mq.server.MQSESSION$1.run(MQSESSION.java:179)
at java.security.AccessController.doPrivileged(Native Method)
at com.ibm.mq.server.MQSESSION.<clinit>(MQSESSION.java:175)
at com.ibm.mq.MQSESSIONServer.getMQSESSION(MQSESSIONServer.java:67)
at com.ibm.mq.MQSESSION.getSession(MQSESSION.java:329)
at com.ibm.mq.MQManagedConnectionJ11.<init>(MQManagedConnectionJ11.java:
149)
at com.ibm.mq.MQBindingsManagedConnectionFactoryJ11._createManagedConnec
tion(MQBindingsManagedConnectionFactoryJ11.java:139)
at com.ibm.mq.MQBindingsManagedConnectionFactoryJ11.createManagedConnect
ion(MQBindingsManagedConnectionFactoryJ11.java:157)
at com.ibm.mq.StoredManagedConnection.<init>(StoredManagedConnection.jav
a:80)
at com.ibm.mq.MQSimpleConnectionManager.allocateConnection(MQSimpleConne
ctionManager.java:150)
at com.ibm.mq.MQQueueManager.obtainBaseMQQueueManager(MQQueueManager.jav
a:666)
at com.ibm.mq.MQQueueManager.construct(MQQueueManager.java:615)
at com.ibm.mq.MQQueueManager.<init>(MQQueueManager.java:436)
at com.ibm.mq.MQSPIQueueManager.<init>(MQSPIQueueManager.java:52)
at com.ibm.mq.jms.MQConnection.createQM(MQConnection.java:1067)
at com.ibm.mq.jms.MQConnection.createQMXA(MQConnection.java:757)
at com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:209)
at com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:78)
at com.ibm.mq.jms.MQXAQueueConnection.<init>(MQXAQueueConnection.java:46
at com.ibm.mq.jms.MQXAQueueConnectionFactory.createXAQueueConnection(MQX
AQueueConnectionFactory.java:53)
at weblogic.jms.foreign.mqseries.WrapMQXAQueueConnectionFactory.createXA
QueueConnection(WrapMQXAQueueConnectionFactory.java:29)
at MQSeriesHelperImpl$JMSObject.<init>(MQSeriesHelperImpl.java:237)
at MQSeriesHelperImpl.bridgeWLS2MQS(MQSeriesHelperImpl.java:125)
at MQSeriesHelperImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.jav
a:267)
at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest
.java:22)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
End server side stack trace
java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
Start server side stack trace:
java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1312)
at java.lang.Runtime.loadLibrary0(Runtime.java:749)
at java.lang.System.loadLibrary(System.java:820)
at com.ibm.mq.server.MQSESSION$1.run(MQSESSION.java:179)
at java.security.AccessController.doPrivileged(Native Method)
at com.ibm.mq.server.MQSESSION.<clinit>(MQSESSION.java:175)
at com.ibm.mq.MQSESSIONServer.getMQSESSION(MQSESSIONServer.java:67)
at com.ibm.mq.MQSESSION.getSession(MQSESSION.java:329)
at com.ibm.mq.MQManagedConnectionJ11.<init>(MQManagedConnectionJ11.java:
149)
at com.ibm.mq.MQBindingsManagedConnectionFactoryJ11._createManagedConnec
tion(MQBindingsManagedConnectionFactoryJ11.java:139)
at com.ibm.mq.MQBindingsManagedConnectionFactoryJ11.createManagedConnect
ion(MQBindingsManagedConnectionFactoryJ11.java:157)
at com.ibm.mq.StoredManagedConnection.<init>(StoredManagedConnection.jav
a:80)
at com.ibm.mq.MQSimpleConnectionManager.allocateConnection(MQSimpleConne
ctionManager.java:150)
at com.ibm.mq.MQQueueManager.obtainBaseMQQueueManager(MQQueueManager.jav
a:666)
at com.ibm.mq.MQQueueManager.construct(MQQueueManager.java:615)
at com.ibm.mq.MQQueueManager.<init>(MQQueueManager.java:436)
at com.ibm.mq.MQSPIQueueManager.<init>(MQSPIQueueManager.java:52)
at com.ibm.mq.jms.MQConnection.createQM(MQConnection.java:1067)
at com.ibm.mq.jms.MQConnection.createQMXA(MQConnection.java:757)
at com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:209)
at com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:78)
at com.ibm.mq.jms.MQXAQueueConnection.<init>(MQXAQueueConnection.java:46
at com.ibm.mq.jms.MQXAQueueConnectionFactory.createXAQueueConnection(MQX
AQueueConnectionFactory.java:53)
at weblogic.jms.foreign.mqseries.WrapMQXAQueueConnectionFactory.createXA
QueueConnection(WrapMQXAQueueConnectionFactory.java:29)
at MQSeriesHelperImpl$JMSObject.<init>(MQSeriesHelperImpl.java:237)
at MQSeriesHelperImpl.bridgeWLS2MQS(MQSeriesHelperImpl.java:125)
at MQSeriesHelperImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.jav
a:267)
at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest
.java:22)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
End server side stack trace
<<no stack trace available>>
--------------- nested within: ------------------
weblogic.rmi.extensions.RemoteRuntimeException - with nested exception:
[java.rmi.ServerError: A error occurred the server; nested exception is:
java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
Start server side stack trace:
java.rmi.ServerError: A error occurred the server; nested exception is:
java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1312)
at java.lang.Runtime.loadLibrary0(Runtime.java:749)
at java.lang.System.loadLibrary(System.java:820)
at com.ibm.mq.server.MQSESSION$1.run(MQSESSION.java:179)
at java.security.AccessController.doPrivileged(Native Method)
at com.ibm.mq.server.MQSESSION.<clinit>(MQSESSION.java:175)
at com.ibm.mq.MQSESSIONServer.getMQSESSION(MQSESSIONServer.java:67)
at com.ibm.mq.MQSESSION.getSession(MQSESSION.java:329)
at com.ibm.mq.MQManagedConnectionJ11.<init>(MQManagedConnectionJ11.java:
149)
at com.ibm.mq.MQBindingsManagedConnectionFactoryJ11._createManagedConnec
tion(MQBindingsManagedConnectionFactoryJ11.java:139)
at com.ibm.mq.MQBindingsManagedConnectionFactoryJ11.createManagedConnect
ion(MQBindingsManagedConnectionFactoryJ11.java:157)
at com.ibm.mq.StoredManagedConnection.<init>(StoredManagedConnection.jav
a:80)
at com.ibm.mq.MQSimpleConnectionManager.allocateConnection(MQSimpleConne
ctionManager.java:150)
at com.ibm.mq.MQQueueManager.obtainBaseMQQueueManager(MQQueueManager.jav
a:666)
at com.ibm.mq.MQQueueManager.construct(MQQueueManager.java:615)
at com.ibm.mq.MQQueueManager.<init>(MQQueueManager.java:436)
at com.ibm.mq.MQSPIQueueManager.<init>(MQSPIQueueManager.java:52)
at com.ibm.mq.jms.MQConnection.createQM(MQConnection.java:1067)
at com.ibm.mq.jms.MQConnection.createQMXA(MQConnection.java:757)
at com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:209)
at com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:78)
at com.ibm.mq.jms.MQXAQueueConnection.<init>(MQXAQueueConnection.java:46
at com.ibm.mq.jms.MQXAQueueConnectionFactory.createXAQueueConnection(MQX
AQueueConnectionFactory.java:53)
at weblogic.jms.foreign.mqseries.WrapMQXAQueueConnectionFactory.createXA
QueueConnection(WrapMQXAQueueConnectionFactory.java:29)
at MQSeriesHelperImpl$JMSObject.<init>(MQSeriesHelperImpl.java:237)
at MQSeriesHelperImpl.bridgeWLS2MQS(MQSeriesHelperImpl.java:125)
at MQSeriesHelperImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.jav
a:267)
at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest
.java:22)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
End server side stack trace
; nested exception is:
java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
Start server side stack trace:
java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1312)
at java.lang.Runtime.loadLibrary0(Runtime.java:749)
at java.lang.System.loadLibrary(System.java:820)
at com.ibm.mq.server.MQSESSION$1.run(MQSESSION.java:179)
at java.security.AccessController.doPrivileged(Native Method)
at com.ibm.mq.server.MQSESSION.<clinit>(MQSESSION.java:175)
at com.ibm.mq.MQSESSIONServer.getMQSESSION(MQSESSIONServer.java:67)
at com.ibm.mq.MQSESSION.getSession(MQSESSION.java:329)
at com.ibm.mq.MQManagedConnectionJ11.<init>(MQManagedConnectionJ11.java:
149)
at com.ibm.mq.MQBindingsManagedConnectionFactoryJ11._createManagedConnec
tion(MQBindingsManagedConnectionFactoryJ11.java:139)
at com.ibm.mq.MQBindingsManagedConnectionFactoryJ11.createManagedConnect
ion(MQBindingsManagedConnectionFactoryJ11.java:157)
at com.ibm.mq.StoredManagedConnection.<init>(StoredManagedConnection.jav
a:80)
at com.ibm.mq.MQSimpleConnectionManager.allocateConnection(MQSimpleConne
ctionManager.java:150)
at com.ibm.mq.MQQueueManager.obtainBaseMQQueueManager(MQQueueManager.jav
a:666)
at com.ibm.mq.MQQueueManager.construct(MQQueueManager.java:615)
at com.ibm.mq.MQQueueManager.<init>(MQQueueManager.java:436)
at com.ibm.mq.MQSPIQueueManager.<init>(MQSPIQueueManager.java:52)
at com.ibm.mq.jms.MQConnection.createQM(MQConnection.java:1067)
at com.ibm.mq.jms.MQConnection.createQMXA(MQConnection.java:757)
at com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:209)
at com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:78)
at com.ibm.mq.jms.MQXAQueueConnection.<init>(MQXAQueueConnection.java:46
at com.ibm.mq.jms.MQXAQueueConnectionFactory.createXAQueueConnection(MQX
AQueueConnectionFactory.java:53)
at weblogic.jms.foreign.mqseries.WrapMQXAQueueConnectionFactory.createXA
QueueConnection(WrapMQXAQueueConnectionFactory.java:29)
at MQSeriesHelperImpl$JMSObject.<init>(MQSeriesHelperImpl.java:237)
at MQSeriesHelperImpl.bridgeWLS2MQS(MQSeriesHelperImpl.java:125)
at MQSeriesHelperImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.jav
a:267)
at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest
.java:22)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
End server side stack trace
at weblogic.rmi.internal.ProxyStub.invoke(ProxyStub.java:60)
at $Proxy1.bridgeWLS2MQS(Unknown Source)
at MQClient.main(MQClient.java:54)
The point is that over TCPIP the MQ XA connection factory is not available.
The MQ shared memory/JNI driver is required to access it, which limits
access to those processes that are on the same box as the MQ q manager.
This is an MQ series limitation.
Douglas WF Acheson wrote:
> Hello,
>
> If memory server me correct, default connection to MQ Series is through
> JNI calls and shared memory. You have to change the protocol to TCPIP when
> connection to the queue manager on another box (do not know much about XA
> with MQ Series); that is when you connect to MQ Series vi JMS on another
> box you must do something like the following:
>
> qcf = new MQQueueConnectionFactory() ;
> qcf.setHostName(hostName) ;
> qcf.setPort(port) ;
> qcf.setTransportType(JMSC.MQJMS_TP_CLIENT_MQ_TCPIP) ;
> qcf.setQueueManager(qManagerName) ;
>
> Then when you create you queues, sesions etc. you are point at the correct Q
> manager.
>
> Hope this helps ...
>
> Douglas WF Acheson
>
> "Raja Mukherjee" <[email protected]> wrote in message
> news:[email protected]...
> > On a closer look at the original post (sorry for missing that, it was
> early
> > in the morning), you would not be able to use XA if your QM and WLS are in
> > different boxes. Check on this newsgroup, there are several posts on this
> > subject. The whitepaper, if I recall correctly, installs both MQ and WLS
> on
> > the sames box. This is a MQSeries limitation not WLS.
> >
> > .raja
> >
> >
> > "ibrahim Nehme" <[email protected]> wrote in message
> > news:[email protected]...
> > >
> > > I am trying to setup the example given in the BEA white paper:
> > > Using MQSeries as a Transactional Resource Manager with Weblogic Server.
> > > Version 1.
> > > October 25, 2001.
> > > I followed the instructions given in the documents, but when i run
> client
> > program
> > >
> > > >java MQClient t3://localhost:7001 "MQSeries test"
> > > I received the following exception below. Does anyone how what is the
> > reason for
> > >
> > > this exception(s) and how i can solve the problem? My MQSeries Server
> and
> > Weblogic
> > > 6.1 sp2 are installed on seperate NT machines. I installed the MQSeries
> > classes
> > > for java and the MQSeries classes for Java Message Service on the
> weblogic
> > > server machine.
> > > ---------------------------------------
> > > sending: "MQSEries test"
> > > Exception in thread "main" java.rmi.ServerError: A error occurred the
> > server; ne
> > > sted exception is:
> > > java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
> > >
> > > Start server side stack trace:
> > > java.rmi.ServerError: A error occurred the server; nested exception is:
> > > java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
> > > java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
> > > at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1312)
> > > at java.lang.Runtime.loadLibrary0(Runtime.java:749)
> > > at java.lang.System.loadLibrary(System.java:820)
> > > at com.ibm.mq.server.MQSESSION$1.run(MQSESSION.java:179)
> > > at java.security.AccessController.doPrivileged(Native Method)
> > > at com.ibm.mq.server.MQSESSION.<clinit>(MQSESSION.java:175)
> > > at
> > com.ibm.mq.MQSESSIONServer.getMQSESSION(MQSESSIONServer.java:67)
> > > at com.ibm.mq.MQSESSION.getSession(MQSESSION.java:329)
> > > at
> > com.ibm.mq.MQManagedConnectionJ11.<init>(MQManagedConnectionJ11.java:
> > > 149)
> > > at
> > com.ibm.mq.MQBindingsManagedConnectionFactoryJ11._createManagedConnec
> > > tion(MQBindingsManagedConnectionFactoryJ11.java:139)
> > > at
> > com.ibm.mq.MQBindingsManagedConnectionFactoryJ11.createManagedConnect
> > > ion(MQBindingsManagedConnectionFactoryJ11.java:157)
> > > at
> > com.ibm.mq.StoredManagedConnection.<init>(StoredManagedConnection.jav
> > > a:80)
> > > at
> > com.ibm.mq.MQSimpleConnectionManager.allocateConnection(MQSimpleConne
> > > ctionManager.java:150)
> > > at
> > com.ibm.mq.MQQueueManager.obtainBaseMQQueueManager(MQQueueManager.jav
> > > a:666)
> > > at com.ibm.mq.MQQueueManager.construct(MQQueueManager.java:615)
> > > at com.ibm.mq.MQQueueManager.<init>(MQQueueManager.java:436)
> > > at
> com.ibm.mq.MQSPIQueueManager.<init>(MQSPIQueueManager.java:52)
> > > at com.ibm.mq.jms.MQConnection.createQM(MQConnection.java:1067)
> > > at com.ibm.mq.jms.MQConnection.createQMXA(MQConnection.java:757)
> > > at
> > com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:209)
> > > at
> > com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:78)
> > > at
> > com.ibm.mq.jms.MQXAQueueConnection.<init>(MQXAQueueConnection.java:46
> > > )
> > > at
> > com.ibm.mq.jms.MQXAQueueConnectionFactory.createXAQueueConnection(MQX
> > > AQueueConnectionFactory.java:53)
> > > at
> > weblogic.jms.foreign.mqseries.WrapMQXAQueueConnectionFactory.createXA
> > > QueueConnection(WrapMQXAQueueConnectionFactory.java:29)
> > > at
> > MQSeriesHelperImpl$JMSObject.<init>(MQSeriesHelperImpl.java:237)
> > > at MQSeriesHelperImpl.bridgeWLS2MQS(MQSeriesHelperImpl.java:125)
> > > at MQSeriesHelperImpl_WLSkel.invoke(Unknown Source)
> > > at
> > weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
> > > at
> > weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.jav
> > > a:267)
> > > at
> > weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest
> > > java:22)
> > > at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
> > > at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
> > > End server side stack trace
> > > ; nested exception is:
> > > java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
> > >
> > > Start server side stack trace:
> > > java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
> > > at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1312)
> > > at java.lang.Runtime.loadLibrary0(Runtime.java:749)
> > > at java.lang.System.loadLibrary(System.java:820)
> > > at com.ibm.mq.server.MQSESSION$1.run(MQSESSION.java:179)
> > > at java.security.AccessController.doPrivileged(Native Method)
> > > at com.ibm.mq.server.MQSESSION.<clinit>(MQSESSION.java:175)
> > > at
> > com.ibm.mq.MQSESSIONServer.getMQSESSION(MQSESSIONServer.java:67)
> > > at com.ibm.mq.MQSESSION.getSession(MQSESSION.java:329)
> > > at
> > com.ibm.mq.MQManagedConnectionJ11.<init>(MQManagedConnectionJ11.java:
> > > 149)
> > > at
> > com.ibm.mq.MQBindingsManagedConnectionFactoryJ11._createManagedConnec
> > > tion(MQBindingsManagedConnectionFactoryJ11.java:139)
> > > at
> > com.ibm.mq.MQBindingsManagedConnectionFactoryJ11.createManagedConnect
> > > ion(MQBindingsManagedConnectionFactoryJ11.java:157)
> > > at
> > com.ibm.mq.StoredManagedConnection.<init>(StoredManagedConnection.jav
> > > a:80)
> > > at
> > com.ibm.mq.MQSimpleConnectionManager.allocateConnection(MQSimpleConne
> > > ctionManager.java:150)
> > > at
> > com.ibm.mq.MQQueueManager.obtainBaseMQQueueManager(MQQueueManager.jav
> > > a:666)
> > > at com.ibm.mq.MQQueueManager.construct(MQQueueManager.java:615)
> > > at com.ibm.mq.MQQueueManager.<init>(MQQueueManager.java:436)
> > > at
> com.ibm.mq.MQSPIQueueManager.<init>(MQSPIQueueManager.java:52)
> > > at com.ibm.mq.jms.MQConnection.createQM(MQConnection.java:1067)
> > > at com.ibm.mq.jms.MQConnection.createQMXA(MQConnection.java:757)
> > > at
> > com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:209)
> > > at
> > com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:78)
> > > at
> > com.ibm.mq.jms.MQXAQueueConnection.<init>(MQXAQueueConnection.java:46
> > > )
> > > at
> > com.ibm.mq.jms.MQXAQueueConnectionFactory.createXAQueueConnection(MQX
> > > AQueueConnectionFactory.java:53)
> > > at
> > weblogic.jms.foreign.mqseries.WrapMQXAQueueConnectionFactory.createXA
> > > QueueConnection(WrapMQXAQueueConnectionFactory.java:29)
> > > at
> > MQSeriesHelperImpl$JMSObject.<init>(MQSeriesHelperImpl.java:237)
> > > at MQSeriesHelperImpl.bridgeWLS2MQS(MQSeriesHelperImpl.java:125)
> > > at MQSeriesHelperImpl_WLSkel.invoke(Unknown Source)
> > > at
> > weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
> > > at
> > weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.jav
> > > a:267)
> > > at
> > weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest
> > > java:22)
> > > at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
> > > at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
> > > End server side stack trace
> > >
> > > java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
> > >
> > > Start server side stack trace:
> > > java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
> > > at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1312)
> > > at java.lang.Runtime.loadLibrary0(Runtime.java:749)
> > > at java.lang.System.loadLibrary(System.java:820)
> > > at com.ibm.mq.server.MQSESSION$1.run(MQSESSION.java:179)
> > > at java.security.AccessController.doPrivileged(Native Method)
> > > at com.ibm.mq.server.MQSESSION.<clinit>(MQSESSION.java:175)
> > > at
> > com.ibm.mq.MQSESSIONServer.getMQSESSION(MQSESSIONServer.java:67)
> > > at com.ibm.mq.MQSESSION.getSession(MQSESSION.java:329)
> > > at
> > com.ibm.mq.MQManagedConnectionJ11.<init>(MQManagedConnectionJ11.java:
> > > 149)
> > > at
> > com.ibm.mq.MQBindingsManagedConnectionFactoryJ11._createManagedConnec
> > > tion(MQBindingsManagedConnectionFactoryJ11.java:139)
> > > at
> > com.ibm.mq.MQBindingsManagedConnectionFactoryJ11.createManagedConnect
> > > ion(MQBindingsManagedConnectionFactoryJ11.java:157)
> > > at
> > com.ibm.mq.StoredManagedConnection.<init>(StoredManagedConnection.jav
> > > a:80)
> > > at
> > com.ibm.mq.MQSimpleConnectionManager.allocateConnection(MQSimpleConne
> > > ctionManager.java:150)
> > > at
> > com.ibm.mq.MQQueueManager.obtainBaseMQQueueManager(MQQueueManager.jav
> > > a:666)
> > > at com.ibm.mq.MQQueueManager.construct(MQQueueManager.java:615)
> > > at com.ibm.mq.MQQueueManager.<init>(MQQueueManager.java:436)
> > > at
> com.ibm.mq.MQSPIQueueManager.<init>(MQSPIQueueManager.java:52)
> > > at com.ibm.mq.jms.MQConnection.createQM(MQConnection.java:1067)
> > > at com.ibm.mq.jms.MQConnection.createQMXA(MQConnection.java:757)
> > > at
> > com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:209)
> > > at
> > com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:78)
> > > at
> > com.ibm.mq.jms.MQXAQueueConnection.<init>(MQXAQueueConnection.java:46
> > > )
> > > at
> > com.ibm.mq.jms.MQXAQueueConnectionFactory.createXAQueueConnection(MQX
> > > AQueueConnectionFactory.java:53)
> > > at
> > weblogic.jms.foreign.mqseries.WrapMQXAQueueConnectionFactory.createXA
> > > QueueConnection(WrapMQXAQueueConnectionFactory.java:29)
> > > at
> > MQSeriesHelperImpl$JMSObject.<init>(MQSeriesHelperImpl.java:237)
> > > at MQSeriesHelperImpl.bridgeWLS2MQS(MQSeriesHelperImpl.java:125)
> > > at MQSeriesHelperImpl_WLSkel.invoke(Unknown Source)
> > > at
> > weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
> > > at
> > weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.jav
> > > a:267)
> > > at
> > weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest
> > > java:22)
> > > at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
> > > at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
> > > End server side stack trace
> > >
> > > <<no stack trace available>>
> > > --------------- nested within: ------------------
> > > weblogic.rmi.extensions.RemoteRuntimeException - with nested exception:
> > > [java.rmi.ServerError: A error occurred the server; nested exception is:
> > > java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
> > >
> > > Start server side stack trace:
> > > java.rmi.ServerError: A error occurred the server; nested exception is:
> > > java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
> > > java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
> > > at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1312)
> > > at java.lang.Runtime.loadLibrary0(Runtime.java:749)
> > > at java.lang.System.loadLibrary(System.java:820)
> > > at com.ibm.mq.server.MQSESSION$1.run(MQSESSION.java:179)
> > > at java.security.AccessController.doPrivileged(Native Method)
> > > at com.ibm.mq.server.MQSESSION.<clinit>(MQSESSION.java:175)
> > > at
> > com.ibm.mq.MQSESSIONServer.getMQSESSION(MQSESSIONServer.java:67)
> > > at com.ibm.mq.MQSESSION.getSession(MQSESSION.java:329)
> > > at
> > com.ibm.mq.MQManagedConnectionJ11.<init>(MQManagedConnectionJ11.java:
> > > 149)
> > > at
> > com.ibm.mq.MQBindingsManagedConnectionFactoryJ11._createManagedConnec
> > > tion(MQBindingsManagedConnectionFactoryJ11.java:139)
> > > at
> > com.ibm.mq.MQBindingsManagedConnectionFactoryJ11.createManagedConnect
> > > ion(MQBindingsManagedConnectionFactoryJ11.java:157)
> > > at
> > com.ibm.mq.StoredManagedConnection.<init>(StoredManagedConnection.jav
> > > a:80)
> > > at
> > com.ibm.mq.MQSimpleConnectionManager.allocateConnection(MQSimpleConne
> > > ctionManager.java:150)
> > > at
> > com.ibm.mq.MQQueueManager.obtainBaseMQQueueManager(MQQueueManager.jav
> > > a:666)
> > > at com.ibm.mq.MQQueueManager.construct(MQQueueManager.java:615)
> > > at com.ibm.mq.MQQueueManager.<init>(MQQueueManager.java:436)
> > > at
> com.ibm.mq.MQSPIQueueManager.<init>(MQSPIQueueManager.java:52)
> > > at com.ibm.mq.jms.MQConnection.createQM(MQConnection.java:1067)
> > > at com.ibm.mq.jms.MQConnection.createQMXA(MQConnection.java:757)
> > > at
> > com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:209)
> > > at
> > com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:78)
> > > at
> > com.ibm.mq.jms.MQXAQueueConnection.<init>(MQXAQueueConnection.java:46
> > > )
> > > at
> > com.ibm.mq.jms.MQXAQueueConnectionFactory.createXAQueueConnection(MQX
> > > AQueueConnectionFactory.java:53)
> > > at
> > weblogic.jms.foreign.mqseries.WrapMQXAQueueConnectionFactory.createXA
> > > QueueConnection(WrapMQXAQueueConnectionFactory.java:29)
> > > at
> > MQSeriesHelperImpl$JMSObject.<init>(MQSeriesHelperImpl.java:237)
> > > at MQSeriesHelperImpl.bridgeWLS2MQS(MQSeriesHelperImpl.java:125)
> > > at MQSeriesHelperImpl_WLSkel.invoke(Unknown Source)
> > > at
> > weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
> > > at
> > weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.jav
> > > a:267)
> > > at
> > weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest
> > > java:22)
> > > at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
> > > at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
> > > End server side stack trace
> > > ; nested exception is:
> > > java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
> > >
> > > Start server side stack trace:
> > > java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
> > > at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1312)
> > > at java.lang.Runtime.loadLibrary0(Runtime.java:749)
> > > at java.lang.System.loadLibrary(System.java:820)
> > > at com.ibm.mq.server.MQSESSION$1.run(MQSESSION.java:179)
> > > at java.security.AccessController.doPrivileged(Native Method)
> > > at com.ibm.mq.server.MQSESSION.<clinit>(MQSESSION.java:175)
> > > at
> > com.ibm.mq.MQSESSIONServer.getMQSESSION(MQSESSIONServer.java:67)
> > > at com.ibm.mq.MQSESSION.getSession(MQSESSION.java:329)
> > > at
> > com.ibm.mq.MQManagedConnectionJ11.<init>(MQManagedConnectionJ11.java:
> > > 149)
> > > at
> > com.ibm.mq.MQBindingsManagedConnectionFactoryJ11._createManagedConnec
> > > tion(MQBindingsManagedConnectionFactoryJ11.java:139)
> > > at
> > com.ibm.mq.MQBindingsManagedConnectionFactoryJ11.createManagedConnect
> > > ion(MQBindingsManagedConnectionFactoryJ11.java:157)
> > > at
> > com.ibm.mq.StoredManagedConnection.<init>(StoredManagedConnection.jav
> > > a:80)
> > > at
> > com.ibm.mq.MQSimpleConnectionManager.allocateConnection(MQSimpleConne
> > > ctionManager.java:150)
> > > at
> > com.ibm.mq.MQQueueManager.obtainBaseMQQueueManager(MQQueueManager.jav
> > > a:666)
> > > at com.ibm.mq.MQQueueManager.construct(MQQueueManager.java:615)
> > > at com.ibm.mq.MQQueueManager.<init>(MQQueueManager.java:436)
> > > at
> com.ibm.mq.MQSPIQueueManager.<init>(MQSPIQueueManager.java:52)
> > > at com.ibm.mq.jms.MQConnection.createQM(MQConnection.java:1067)
> > > at com.ibm.mq.jms.MQConnection.createQMXA(MQConnection.java:757)
> > > at
> > com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:209)
> > > at
> > com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:78)
> > > at
> > com.ibm.mq.jms.MQXAQueueConnection.<init>(MQXAQueueConnection.java:46
> > > )
> > > at
> > com.ibm.mq.jms.MQXAQueueConnectionFactory.createXAQueueConnection(MQX
> > > AQueueConnectionFactory.java:53)
> > > at
> > weblogic.jms.foreign.mqseries.WrapMQXAQueueConnectionFactory.createXA
> > > QueueConnection(WrapMQXAQueueConnectionFactory.java:29)
> > > at
> > MQSeriesHelperImpl$JMSObject.<init>(MQSeriesHelperImpl.java:237)
> > > at MQSeriesHelperImpl.bridgeWLS2MQS(MQSeriesHelperImpl.java:125)
> > > at MQSeriesHelperImpl_WLSkel.invoke(Unknown Source)
> > > at
> > weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
> > > at
> > weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.jav
> > > a:267)
> > > at
> > weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest
> > > java:22)
> > > at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
> > > at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
> > > End server side stack trace
> > > ]
> > > at weblogic.rmi.internal.ProxyStub.invoke(ProxyStub.java:60)
> > > at $Proxy1.bridgeWLS2MQS(Unknown Source)
> > > at MQClient.main(MQClient.java:54)
> >
> >
-
Hi All,
I would like to implement resource manager via oracle service. Code is as follows:
exec DBMS_RESOURCE_MANAGER.CREATE_PENDING_AREA();
exec DBMS_RESOURCE_MANAGER.CREATE_PLAN(PLAN => 'my_plan',COMMENT => 'Resource plan/method for ERP Database');
exec DBMS_RESOURCE_MANAGER.CREATE_CONSUMER_GROUP(CONSUMER_GROUP => 'normal',COMMENT => 'Resource consumer group/method for normal jobs');
exec DBMS_RESOURCE_MANAGER.CREATE_CONSUMER_GROUP(CONSUMER_GROUP => 'adhoc',COMMENT => 'Resource consumer group/method for adhoc jobs');
exec DBMS_RESOURCE_MANAGER.CREATE_PLAN_DIRECTIVE(PLAN => 'my_plan',GROUP_OR_SUBPLAN => 'normal', COMMENT => 'normal sessions');
exec DBMS_RESOURCE_MANAGER.CREATE_PLAN_DIRECTIVE(PLAN => 'my_plan', GROUP_OR_SUBPLAN => 'adhoc', COMMENT => 'adhoc sessions');
exec DBMS_RESOURCE_MANAGER.CREATE_PLAN_DIRECTIVE(PLAN => 'my_plan', GROUP_OR_SUBPLAN => 'OTHER_GROUPS', COMMENT => 'mandatory');
EXEC DBMS_RESOURCE_MANAGER.SET_CONSUMER_GROUP_MAPPING(DBMS_RESOURCE_MANAGER.SERVICE_name , 'goslive', 'normal');
EXEC DBMS_RESOURCE_MANAGER.SET_CONSUMER_GROUP_MAPPING(DBMS_RESOURCE_MANAGER.SERVICE_name , 'test', 'adhoc');
exec dbms_resource_manager.set_consumer_group_mapping_pri(2, 7,1, 9, 8, 10, 5, 4, 3, 6);
exec DBMS_RESOURCE_MANAGER.VALIDATE_PENDING_AREA();
exec DBMS_RESOURCE_MANAGER.SUBMIT_PENDING_AREA();
ALTER SYSTEM SET RESOURCE_MANAGER_PLAN = 'my_plan';
But looks like it doesn't work. Any idea what i'm missing.
Same code if I use with user name wise it works fine, as I can assign initial consumer group for the user. But not able to assign initial consumer group to the service.
Please advice.
Thanks,
Hal.It seems that we need to grant the switch privileges with Oracle 10.2.
If granting the switch privilege is not done, any connection is assigned to the OTHER_GROUPS resource consumer group.
Here is my test case.
Setup:
bas002> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Prod
PL/SQL Release 10.2.0.2.0 - Production
CORE 10.2.0.2.0 Production
TNS for 32-bit Windows: Version 10.2.0.2.0 - Production
NLSRTL Version 10.2.0.2.0 - Production
bas002>
bas002> ALTER SYSTEM SET RESOURCE_MANAGER_PLAN = '';
System altered.
bas002> begin
2 DBMS_RESOURCE_MANAGER.CREATE_PENDING_AREA();
3 DBMS_RESOURCE_MANAGER.DELETE_PLAN_CASCADE('MY_PLAN');
4 DBMS_RESOURCE_MANAGER.SUBMIT_PENDING_AREA();
5 end;
6 /
PL/SQL procedure successfully completed.
bas002> show errors
No errors.
bas002>
bas002>
bas002>
bas002> alter system set service_names='TEST, GOSLIVE';
System altered.
bas002>
bas002> begin
2 DBMS_RESOURCE_MANAGER.CLEAR_PENDING_AREA();
3 DBMS_RESOURCE_MANAGER.CREATE_PENDING_AREA();
4 DBMS_RESOURCE_MANAGER.CREATE_PLAN(
5 PLAN => 'MY_PLAN',
6 COMMENT => 'Resource plan/method for ERP Database');
7 DBMS_RESOURCE_MANAGER.CREATE_CONSUMER_GROUP(
8 CONSUMER_GROUP => 'NORMAL',
9 COMMENT => 'Resource consumer group/method for normal jobs');
10 DBMS_RESOURCE_MANAGER.CREATE_CONSUMER_GROUP(
11 CONSUMER_GROUP => 'ADHOC',
12 COMMENT => 'Resource consumer group/method for adhoc jobs');
13 DBMS_RESOURCE_MANAGER.CREATE_PLAN_DIRECTIVE(
14 PLAN => 'MY_PLAN',
15 GROUP_OR_SUBPLAN => 'NORMAL',
16 COMMENT => 'normal sessions');
17 DBMS_RESOURCE_MANAGER.CREATE_PLAN_DIRECTIVE(
18 PLAN => 'MY_PLAN',
19 GROUP_OR_SUBPLAN => 'ADHOC',
20 COMMENT => 'adhoc sessions');
21 DBMS_RESOURCE_MANAGER.CREATE_PLAN_DIRECTIVE(
22 PLAN => 'MY_PLAN',
23 GROUP_OR_SUBPLAN => 'OTHER_GROUPS',
24 COMMENT => 'mandatory');
25 DBMS_RESOURCE_MANAGER.SET_CONSUMER_GROUP_MAPPING(
26 DBMS_RESOURCE_MANAGER.SERVICE_NAME , 'GOSLIVE', 'NORMAL');
27 DBMS_RESOURCE_MANAGER.SET_CONSUMER_GROUP_MAPPING(
28 DBMS_RESOURCE_MANAGER.SERVICE_NAME , 'TEST', 'ADHOC');
29 DBMS_RESOURCE_MANAGER.VALIDATE_PENDING_AREA();
30 DBMS_RESOURCE_MANAGER.SUBMIT_PENDING_AREA();
31 end;
32 /
PL/SQL procedure successfully completed.
bas002> show errors
No errors.
bas002>
bas002> begin
2 DBMS_RESOURCE_MANAGER_PRIVS.GRANT_SWITCH_CONSUMER_GROUP('O', 'NORMAL', false);
3 DBMS_RESOURCE_MANAGER_PRIVS.GRANT_SWITCH_CONSUMER_GROUP('O', 'ADHOC', false);
4 end;
5 /
PL/SQL procedure successfully completed.
bas002> show errors
No errors.
bas002>
bas002> ALTER SYSTEM SET RESOURCE_MANAGER_PLAN = 'MY_PLAN';
System altered.Connection tests:
bas002> select username, service_name, resource_consumer_group from v$session where username ='O';
USERNAME
SERVICE_NAME
RESOURCE_CONSUMER_GROUP
O
TEST
ADHOC
bas002> select username, service_name, resource_consumer_group from v$session where username ='O';
USERNAME
SERVICE_NAME
RESOURCE_CONSUMER_GROUP
O
goslive
NORMAL. -
Safari on Leopard Crashes: "Safari is missing important resources..."
I installed Leopard, all was working, today I get:
"Safari is missing important resources and should be reinstalled."
Outside of the normal install, I installed all the optional stuff. I don't know if that contrbutes to the failure or not. The browser starts, works on some pages, then on others dies.
Thanks for any help.need some assistance to resolve this challenge, Apple support keeps stating that I have to do an archive and install or a clean install for this situation, I find it appalling that since I have install Leopard, apple support response to any situation such as crashes, their answer is to do a clean install because the problem is to WIDE, I had live dictionary that was in manager input that didn't respond so I deleted it and then after a reboot SAFARI kept crashing it has been thsi way for 3days, any help would be truly well appreciated, I have done 3 clean install in one week, I am no expert, however there ought a be a simple resolve to this???
Process: Safari [65757]
Path: /Applications/Safari.app/Contents/MacOS/Safari
Identifier: com.apple.Safari
Version: 3.0.4 (5523.10)
Build Info: WebBrowser-55231000~1
Code Type: X86 (Native)
Parent Process: launchd [21538]
Date/Time: 2007-11-01 08:03:03.266 -0700
OS Version: Mac OS X 10.5 (9A581)
Report Version: 6
Exception Type: EXCBADACCESS (SIGBUS)
Exception Codes: KERNPROTECTIONFAILURE at 0x0000000000000020
Crashed Thread: 0
Thread 0 Crashed:
0 libobjc.A.dylib 0x918586e8 objc_msgSend + 24
1 com.apple.AppKit 0x94ded1a1 -[NSInputManager _loadBundle] + 181
2 com.apple.AppKit 0x94dec912 -[NSInputManager initWithName:host:] + 2639
3 com.apple.AppKit 0x9494658c +[NSInputManager initialize] + 1134
4 libobjc.A.dylib 0x91849b18 classinitialize + 367
5 libobjc.A.dylib 0x91848499 classlookupMethodAndLoadCache + 81
6 libobjc.A.dylib 0x91858736 objc_msgSend + 102
7 com.apple.AppKit 0x94945409 -[NSApplication run] + 83
8 com.apple.AppKit 0x949129ba NSApplicationMain + 574
9 com.apple.Safari 0x00002876 0x1000 + 6262
Thread 1:
0 libSystem.B.dylib 0x9386bace _semwaitsignal + 10
1 libSystem.B.dylib 0x93895ced pthreadcondwait$UNIX2003 + 73
2 com.apple.WebCore 0x952c55af WebCore::IconDatabase::syncThreadMainLoop() + 239
3 com.apple.WebCore 0x952c0ba5 WebCore::IconDatabase::iconDatabaseSyncThread() + 181
4 libSystem.B.dylib 0x93895075 pthreadstart + 321
5 libSystem.B.dylib 0x93894f32 thread_start + 34
Thread 2:
0 libSystem.B.dylib 0x938648e6 machmsgtrap + 10
1 libSystem.B.dylib 0x9386c0dc mach_msg + 72
2 com.apple.CoreFoundation 0x935130fe CFRunLoopRunSpecific + 1806
3 com.apple.CoreFoundation 0x93513d38 CFRunLoopRunInMode + 88
4 com.apple.CFNetwork 0x922aa7be CFURLCacheWorkerThread(void*) + 396
5 libSystem.B.dylib 0x93895075 pthreadstart + 321
6 libSystem.B.dylib 0x93894f32 thread_start + 34
Thread 0 crashed with X86 Thread State (32-bit):
eax: 0xa01de0a0 ebx: 0x00400bc8 ecx: 0x918596ac edx: 0x00000000
edi: 0x0023ee30 esi: 0x00407740 ebp: 0xbffff748 esp: 0xbffff6e8
ss: 0x0000001f efl: 0x00010286 eip: 0x918586e8 cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
cr2: 0x00000020
Binary Images:
0x1000 - 0x12efef com.apple.Safari 3.0.4 (5523.10) <c10a33847b3bae1843862f299f82c6ab> /Applications/Safari.app/Contents/MacOS/Safari
0x176000 - 0x184ff8 SyndicationUI ??? (???) <b889956deee65d04d3540e0b71ef93d9> /System/Library/PrivateFrameworks/SyndicationUI.framework/Versions/A/Syndicatio nUI
0x400000 - 0x405fff +com.mac.jrc.SafariPlus 1.5.1 (20070620) /Library/InputManagers/SafariPlus/SafariPlus.bundle/Contents/MacOS/SafariPlus
0x5c4000 - 0x6aaff7 com.apple.RawCamera.bundle 2.0 (2.0) /System/Library/CoreServices/RawCamera.bundle/Contents/MacOS/RawCamera
0x8fe00000 - 0x8fe2d883 dyld 95.3 (???) <81592e798780564b5d46b988f7ee1a6a> /usr/lib/dyld
0x90003000 - 0x90005fff com.apple.CrashReporterSupport 10.5.0 (156) <3088b785b10d03504ed02f3fee5d3aab> /System/Library/PrivateFrameworks/CrashReporterSupport.framework/Versions/A/Cra shReporterSupport
0x90006000 - 0x90048fef com.apple.NavigationServices 3.5 (160) <26d03493eac3e290fd1d0fd5ff311863> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/NavigationSer vices.framework/Versions/A/NavigationServices
0x90049000 - 0x9004bff5 libRadiance.dylib ??? (???) <20eadb285da83df96c795c2c5fa20590> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libRadiance.dylib
0x9004c000 - 0x9004cff8 com.apple.ApplicationServices 34 (34) <8f910fa65f01d401ad8d04cc933cf887> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Application Services
0x900f8000 - 0x90155ffb libstdc++.6.dylib ??? (???) <04b812dcec670daa8b7d2852ab14be60> /usr/lib/libstdc++.6.dylib
0x903fb000 - 0x90435ff7 com.apple.coreui 0.1 (60) /System/Library/PrivateFrameworks/CoreUI.framework/Versions/A/CoreUI
0x90436000 - 0x90902ffe libGLProgrammability.dylib ??? (???) <ebd2e6c99ec2662b4bdaa3212ab94aed> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLProgramma bility.dylib
0x90903000 - 0x9092dfef libauto.dylib ??? (???) <d468bc4a8a69343f1748c293db1b57fb> /usr/lib/libauto.dylib
0x9092e000 - 0x90964fef libtidy.A.dylib ??? (???) <e4d3e7399fb83d7f145f9b4ec8196242> /usr/lib/libtidy.A.dylib
0x909d5000 - 0x90a25ff7 com.apple.HIServices 1.6.0 (???) <d74aa73e4cfd30a08fb169198a8d2539> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ HIServices.framework/Versions/A/HIServices
0x90a26000 - 0x90af1fff com.apple.ColorSync 4.5.0 (4.5.0) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ColorSync.framework/Versions/A/ColorSync
0x90af2000 - 0x90ba1fff com.apple.DesktopServices 1.4.2 (1.4.2) <ec69c4072b0df6f52ef3f48fadf4c4b8> /System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Desk topServicesPriv
0x90be7000 - 0x90c79ff3 com.apple.ApplicationServices.ATS 3.0 (???) <fb5f572243dbc370a0ea5efc8e81ae11> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/ATS
0x90c7b000 - 0x90d5fffb com.apple.CoreData 100 (185) <a4e63784275e25e62f57e75e0af0b94d> /System/Library/Frameworks/CoreData.framework/Versions/A/CoreData
0x90e72000 - 0x90f96fe3 com.apple.audio.toolbox.AudioToolbox 1.5 (1.5) /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox
0x90f98000 - 0x90fbcfeb libssl.0.9.7.dylib ??? (???) <acee7fc534674498dcac211318aa23e8> /usr/lib/libssl.0.9.7.dylib
0x90fbd000 - 0x91019ff7 com.apple.htmlrendering 68 (1.1.3) <fe87a9dede38db00e6c8949942c6bd4f> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HTMLRendering .framework/Versions/A/HTMLRendering
0x9101a000 - 0x913affef com.apple.QuartzCore 1.5.0 (1.5.0) <363cc63c669523cc3fec577949bb1308> /System/Library/Frameworks/QuartzCore.framework/Versions/A/QuartzCore
0x913bd000 - 0x913bdff8 com.apple.Cocoa 6.5 (???) <e064f94d969ce25cb7de3cfb980c3249> /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa
0x913be000 - 0x91465ff7 com.apple.QD 3.11.49 (???) <ca01e72078d30d6b183aa5224344608b> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ QD.framework/Versions/A/QD
0x91466000 - 0x91476ffc com.apple.LangAnalysis 1.6.4 (1.6.4) <cbeb17ab39f28351fe2ab5b82bf465bc> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ LangAnalysis.framework/Versions/A/LangAnalysis
0x91477000 - 0x914c1fe1 com.apple.securityinterface 3.0 (32532) <f521dae416ce7a3bdd594b0d4e2fb517> /System/Library/Frameworks/SecurityInterface.framework/Versions/A/SecurityInter face
0x914c2000 - 0x91555fff com.apple.ink.framework 101.3 (86) <bf3fa8927b4b8baae92381a976fd2079> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Ink.framework /Versions/A/Ink
0x91575000 - 0x915cefff libGLU.dylib ??? (???) /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLU.dylib
0x915dd000 - 0x91642ffb com.apple.ISSupport 1.6 (34) /System/Library/PrivateFrameworks/ISSupport.framework/Versions/A/ISSupport
0x91643000 - 0x9180cfef com.apple.security 5.0 (31122) <0759867b3944f1e54ce3d9078bbdb867> /System/Library/Frameworks/Security.framework/Versions/A/Security
0x9180d000 - 0x91843fff com.apple.SystemConfiguration 1.9.0 (1.9.0) <7919d9588c3b0d556646e555b7193f1f> /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
0x91844000 - 0x91923fff libobjc.A.dylib ??? (???) <5eda47fec2d0e7853b3506aa1fd2dafa> /usr/lib/libobjc.A.dylib
0x91924000 - 0x91924ffd com.apple.vecLib 3.4 (vecLib 3.4) /System/Library/Frameworks/vecLib.framework/Versions/A/vecLib
0x91925000 - 0x91952feb libvDSP.dylib ??? (???) <a26683d121ee0f96df9a9d0bfca36049> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvDSP.dylib
0x91953000 - 0x91a8bff7 libicucore.A.dylib ??? (???) <afcea652ff2ec36885b2c81c57d06d4c> /usr/lib/libicucore.A.dylib
0x91a8c000 - 0x91b06ff8 com.apple.print.framework.PrintCore 5.5 (245) <9441d178f4b430cf92b67bf346646693> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/PrintCore
0x91b07000 - 0x91c85fff com.apple.AddressBook.framework 4.1 (687) <3f005092d08e963eabe8f7f66c09cc1e> /System/Library/Frameworks/AddressBook.framework/Versions/A/AddressBook
0x91c86000 - 0x91c95ffe com.apple.DSObjCWrappers.Framework 1.2 (1.2) <f5b58d1d3a855a63d493ccbec417a1e9> /System/Library/PrivateFrameworks/DSObjCWrappers.framework/Versions/A/DSObjCWra ppers
0x91c96000 - 0x91cc8fff com.apple.LDAPFramework 1.4.3 (106) <3a5c9df6032143cd6bc2658a9d328d8e> /System/Library/Frameworks/LDAP.framework/Versions/A/LDAP
0x91ce1000 - 0x91ce1fff com.apple.Carbon 136 (136) <98a5e3bc0c4fa44bbb09713bb88707fe> /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
0x91ce2000 - 0x91d1bffe com.apple.securityfoundation 3.0 (32585) <cc88aa94d417917bdf35035819ccf4b4> /System/Library/Frameworks/SecurityFoundation.framework/Versions/A/SecurityFoun dation
0x91d1c000 - 0x91da8ff7 com.apple.LaunchServices 283 (283) <30168051779817916e04eb8e85fcc17f> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchS ervices.framework/Versions/A/LaunchServices
0x91da9000 - 0x91eeeff7 com.apple.ImageIO.framework 2.0.0 (2.0.0) <154d4d8cda2bd99518cbabc9f2d69833> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/ImageIO
0x92280000 - 0x9229eff3 com.apple.DirectoryService.Framework 3.5 (3.5) <899d8c9ee31b004a6ff73dab88982b1a> /System/Library/Frameworks/DirectoryService.framework/Versions/A/DirectoryServi ce
0x9229f000 - 0x92316fe3 com.apple.CFNetwork 217 (219) <f3c16ae4b2faeb134957ee96d90dc5ca> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CFNetwo rk.framework/Versions/A/CFNetwork
0x9231f000 - 0x9235efef libTIFF.dylib ??? (???) <6d0f80e9d4d81f3f64c876aca005bd53> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libTIFF.dylib
0x9235f000 - 0x9236bff5 libGL.dylib ??? (???) /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGL.dylib
0x9236c000 - 0x92422fe3 com.apple.CoreServices.OSServices 209 (209) <89296b20d2db6c180eee073b699e3484> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/OSServi ces.framework/Versions/A/OSServices
0x92423000 - 0x92441fff libresolv.9.dylib ??? (???) <54e6a08c2f108bdf5916fb483d51961b> /usr/lib/libresolv.9.dylib
0x92442000 - 0x92748fff com.apple.HIToolbox 1.5.0 (???) <1b872a7151ee3f80c9c736a3e46d00d9> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox
0x92749000 - 0x9282aff7 libxml2.2.dylib ??? (???) <450ec38b57fb46013847cce851001a2f> /usr/lib/libxml2.2.dylib
0x9282b000 - 0x92846ffb libPng.dylib ??? (???) <b6abcac36ec7654ff3e1cfa786b0117b> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libPng.dylib
0x92853000 - 0x92c11fea libLAPACK.dylib ??? (???) /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libLAPACK.dylib
0x92d68000 - 0x92e18fff edu.mit.Kerberos 6.0.11 (6.0.11) <33c25789baedcd70a7e24881775dd9ad> /System/Library/Frameworks/Kerberos.framework/Versions/A/Kerberos
0x92e19000 - 0x92e73ff7 com.apple.CoreText 2.0.0 (???) <7fa39cd5bc847615ec02e7c7a37c0508> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreText.framework/Versions/A/CoreText
0x92e74000 - 0x92efbff7 libsqlite3.0.dylib ??? (???) <273efcb717e89c21207c851d7d33fda4> /usr/lib/libsqlite3.0.dylib
0x92efc000 - 0x92efdffc libffi.dylib ??? (???) <a3b573eb950ca583290f7b2b4c486d09> /usr/lib/libffi.dylib
0x92f43000 - 0x92fccfff com.apple.framework.IOKit 1.5.0 (???) <5d9b85c55183f9732eb9efc38d18ba53> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
0x92fcd000 - 0x92fcdffa com.apple.CoreServices 32 (32) <2fcc8f3bd5bbfc000b476cad8e6a3dd2> /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
0x92fce000 - 0x93077fff com.apple.JavaScriptCore 5523.10.3 (5523.10.3) <9e6719a7a0740f5c224099a7b853e45b> /System/Library/Frameworks/JavaScriptCore.framework/Versions/A/JavaScriptCore
0x93078000 - 0x9312affb libcrypto.0.9.7.dylib ??? (???) <330b0e48e67faffc8c22dfc069ca7a47> /usr/lib/libcrypto.0.9.7.dylib
0x93160000 - 0x933d9fe7 com.apple.Foundation 6.5 (677) <d182b2cc21817f7e5b6c7a1b3f421a98> /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
0x9342f000 - 0x93434fff com.apple.backup.framework 1.0 (1.0) /System/Library/PrivateFrameworks/Backup.framework/Versions/A/Backup
0x93488000 - 0x93492feb com.apple.audio.SoundManager 3.9.2 (3.9.2) <0f2ba6e891d3761212cf5a5e6134d683> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CarbonSound.f ramework/Versions/A/CarbonSound
0x93493000 - 0x93496fff com.apple.help 1.1 (36) <b507b08e484cb89033e9cf23062d77de> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Help.framewor k/Versions/A/Help
0x93497000 - 0x9349effe libbsm.dylib ??? (???) <d25c63378a5029648ffd4b4669be31bf> /usr/lib/libbsm.dylib
0x9349f000 - 0x934a0fef libmathCommon.A.dylib ??? (???) /usr/lib/system/libmathCommon.A.dylib
0x934a1000 - 0x935d3fe7 com.apple.CoreFoundation 6.5 (476) <8bfebc0dbad6fc33bea0fa00a1b9ec37> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x935d4000 - 0x935d6fff com.apple.securityhi 3.0 (30817) <2b2854123fed609d1820d2779e2e0963> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SecurityHI.fr amework/Versions/A/SecurityHI
0x935d7000 - 0x9364bfef libvMisc.dylib ??? (???) /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvMisc.dylib
0x9372c000 - 0x93733fe9 libgcc_s.1.dylib ??? (???) <f53c808e87d1184c0f9df63aef53ce0b> /usr/lib/libgcc_s.1.dylib
0x93734000 - 0x9373afff com.apple.print.framework.Print 218 (220) <c35172175abbe554ddadd9b6401351fa> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framewo rk/Versions/A/Print
0x93747000 - 0x93784ff7 libGLImage.dylib ??? (???) <2d5ec9fc8b04b7b33f1d40ec83d86bf3> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLImage.dyl ib
0x937d5000 - 0x937ddfff com.apple.DiskArbitration 2.2 (2.2) <1551b2af557fdf6f368f93e093933852> /System/Library/Frameworks/DiskArbitration.framework/Versions/A/DiskArbitration
0x937de000 - 0x937fdffa libJPEG.dylib ??? (???) <0cfb80109d624beb9ceb3c43b6c5ec10> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libJPEG.dylib
0x93827000 - 0x9383ffff com.apple.openscripting 1.2.6 (???) <b8e553df643f2aec68fa968b3b459b2b> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/OpenScripting .framework/Versions/A/OpenScripting
0x93864000 - 0x939befe3 libSystem.B.dylib ??? (???) <8ecc83dc0399be3946f7a46e88cf4bbb> /usr/lib/libSystem.B.dylib
0x93a7b000 - 0x93a7bffc com.apple.audio.units.AudioUnit 1.5 (1.5) /System/Library/Frameworks/AudioUnit.framework/Versions/A/AudioUnit
0x93a7c000 - 0x93a8bfff libsasl2.2.dylib ??? (???) <b9e1ca0b6612e280b6cbea6df0eec5f6> /usr/lib/libsasl2.2.dylib
0x93a8c000 - 0x93aa2fff com.apple.DictionaryServices 1.0.0 (1.0.0) <ad0aa0252e3323d182e17f50defe56fc> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Diction aryServices.framework/Versions/A/DictionaryServices
0x93aa3000 - 0x93aa3ffd com.apple.Accelerate.vecLib 3.4 (vecLib 3.4) /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/vecLib
0x948a2000 - 0x948d1fe3 com.apple.AE 402 (402) <994ba8e884aefe7bf1fc5987df099e7b> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/AE.fram ework/Versions/A/AE
0x948d2000 - 0x948e0ffd libz.1.dylib ??? (???) <5ddd8539ae2ebfd8e7cc1c57525385c7> /usr/lib/libz.1.dylib
0x948e7000 - 0x9490bfff libxslt.1.dylib ??? (???) <4933ddc7f6618743197aadc85b33b5ab> /usr/lib/libxslt.1.dylib
0x9490c000 - 0x95106fef com.apple.AppKit 6.5 (949) <f8d0f6d0bb5ac092f48f42ca684bdb54> /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
0x95107000 - 0x95107ffd com.apple.Accelerate 1.4 (Accelerate 1.4) /System/Library/Frameworks/Accelerate.framework/Versions/A/Accelerate
0x95108000 - 0x9511cff3 com.apple.ImageCapture 4.0 (5.0.0) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/ImageCapture. framework/Versions/A/ImageCapture
0x9511d000 - 0x951d8fe3 com.apple.WebKit 5523.10.3 (5523.10.3) <2741777559b3948d520a4d126330dbce> /System/Library/Frameworks/WebKit.framework/Versions/A/WebKit
0x951d9000 - 0x9521efef com.apple.Metadata 10.5.0 (398) <4fd74fba0062c2e08ec4b1c10b40ff63> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Metadat a.framework/Versions/A/Metadata
0x952be000 - 0x957d3fff com.apple.WebCore 5523.10.3 (5523.10.3) <89179acba0e5ae2163d4a75ad460cbdb> /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/WebCore.frame work/Versions/A/WebCore
0x9590b000 - 0x9591bfff com.apple.speech.synthesis.framework 3.6.59 (3.6.59) <4ffef145fad3d4d787e0c33eab26b336> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ SpeechSynthesis.framework/Versions/A/SpeechSynthesis
0x959a7000 - 0x95a23feb com.apple.audio.CoreAudio 3.1.0 (3.1) <70bb7c657061631491029a61babe0b26> /System/Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio
0x95a24000 - 0x95a3afe7 com.apple.CoreVideo 1.5.0 (1.5.0) <bcc3dd0978bb626c26378227740e1e80> /System/Library/Frameworks/CoreVideo.framework/Versions/A/CoreVideo
0x95b01000 - 0x95b0afff com.apple.speech.recognition.framework 3.7.24 (3.7.24) <d3180f9edbd9a5e6f283d6156aa3c602> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SpeechRecogni tion.framework/Versions/A/SpeechRecognition
0x95b0b000 - 0x95bd2ff2 com.apple.vImage 3.0 (3.0) /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vImage.fr amework/Versions/A/vImage
0x95bd3000 - 0x95bfafff libcups.2.dylib ??? (???) <6b61eb99e6f5dd2d66cd224e9f82427d> /usr/lib/libcups.2.dylib
0x95bfb000 - 0x95cfcff7 com.apple.PubSub 1.0.0 (59) /System/Library/Frameworks/PubSub.framework/Versions/A/PubSub
0x95d05000 - 0x95d05ffb com.apple.installserver.framework 1.0 (8) /System/Library/PrivateFrameworks/InstallServer.framework/Versions/A/InstallSer ver
0x95d06000 - 0x96116fef libBLAS.dylib ??? (???) /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libBLAS.dylib
0x96117000 - 0x9611cfff com.apple.CommonPanels 1.2.4 (85) <ea0665f57cd267609466ed8b2b20e893> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CommonPanels. framework/Versions/A/CommonPanels
0x9611d000 - 0x9619cff5 com.apple.SearchKit 1.2.0 (1.2.0) <277b460da86bc222785159fe77e2e2ed> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/SearchK it.framework/Versions/A/SearchKit
0x9619d000 - 0x96476fe7 com.apple.CoreServices.CarbonCore 783 (783) <8370e664eeb25edc98d5c1f5405b06ae> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/CarbonCore
0x96633000 - 0x96637fff libGIF.dylib ??? (???) <d4234e6f5e5f530bdafb969157f1f17b> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libGIF.dylib
0x96638000 - 0x96ccffef com.apple.CoreGraphics 1.351.0 (???) <7a6f399039eed6dbe845c169f7d21a70> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/CoreGraphics
0x96cd0000 - 0x96cdcfe7 com.apple.opengl 1.5.4 (1.5.4) <98bccaa83ca5e7101e821b4569a6a2ee> /System/Library/Frameworks/OpenGL.framework/Versions/A/OpenGL
0xfffe8000 - 0xfffebfff libobjc.A.dylib ??? (???) /usr/lib/libobjc.A.dylib
0xffff0000 - 0xffff1780 libSystem.B.dylib ??? (???) /usr/lib/libSystem.B.dylib -
Hi,
I upgraded to RH9 (from RHX5) and very happily started to use both the Snippet and Resource Manager functionality.
I seem to have hit a mental block despite reading the help and looking up this forum regarding updating images in the resource manager .....
I have multiple projects and the same image is used throughout the projects - sometimes only once in a project and sometimes multiple times in the same project.
Lets say this image is called Picture1.gif - due to program re-design I now need to update Picture1.gif.
Picture1.gif is stored in Resource Manager and as it is linked then a copy is also stored in my project.
I delete the old image, create a new image, rename it to the original name Picture1.gif and drag it to Shared Resources and then drag it back again so that it is linked.
Despite the back and forth steps this does in fact work - the image is updated in other projects as expected.
However, if an image appears in a project multiple times then I have to change it everywhere before I can rename it, etc. etc.
I feel quite sure that I am missing something here and that the whole process should be simpler!!
I would have expected somehow to be able to update the image in the resource manger and then sync.
TIA
MorvenHi Morven
In my own experience, it really shouldn't matter where you update the image, as the Resource Manager is a two way street. If you update in RoboHelp, it should be sensed and the updated image copied from your project to replace and update the centralized image. And likewise, if you update the centralized image, Resource Manager should update your project to match the updated centralized image.
Again, I woudn't want to first delete the image followed by saving a new one using the same name. I would either open one of them (centralized or project) and edit as needed. Or edit a copy, make edits, then save using the same file name so the existing image is replaced.
To the best of my knowledge, Resource Manager should sense the change as the date/time stamp should be different as well as possibly the size. Then the automation should kick in to update the image's counterpart and synchronize everything nicely. The only fly in this ointment would be if the new image were different in size from the pixel measurement standpoint. If the new image is wider or taller or narrower or shorter, you would need to ensure that you reset the sizes in your project so they match the new dimensions. Otherwise they will be a bit skewed and have the fun house effect. I believe RoboHelp supplies a script for this.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks -
XRPM Resource Management issue
Gurus,
In xRPM under Resource Management Tab. I am not able to find any resources under resource view.TAble is empty.
Although I have created Resource pool and assinged a resources to administrator.
Please let me know if i am missing any settings
Thanks in advance.Hello Riya,
Here are the steps to assign the Resource Manager to a Resource Pool:
1) Create a Resource Pool
2) Add resources based on the selection criteria.
3) Add a Resource (BP in employee Role) as Resource Manager to this Resource Pool.
NOTE: this resource manager should be attached to your User.
to see which User this Resource Manager is attached to, go to Portfolio Management -> Administration -> Resources
find the resource with its Name or Resource ID (BP) and Display. you will see the linked user. If it is not linked to any user you can assign the user to this resource manager.
4) when you login with this Resource Manager's User, and navigate to Resource Management -> Resources, you will see all the resources under the Resource Pool where this current user is Resource Manager.
Hope this will help.
Thanks and Regards,
Piyusha -
Can't see boards in a VXI chassis connected via VXI-MXI-2 cards using a GPIB-USB adapter
I'm working on a system that has two VXI enclosures, and the two are bridged via VXI-MXI-2 boards in each of them. The first one has a GPIB-VXI board in slot 0, and I have a Winodows XP computer connected to that with a GPIB-USB-HS adapter. The problem is that I cannot see any of the boards in the second chassis over GPIB in the Measurement & Automation Explorer. As far as I can tell, everything is configured correctly; the VXI-MXI-2 board in the first chassis is in the last slot and has a logical address of 126, and the VXI-MXI-2 board in the second chassis is in slot 0 and has a logical address of 127. To make things even more confusing, if I put a VXI PC in slot 0 of the first chassis, it seems to see everything without any problems. Do you have any idea why this might be happening? I'm pretty new to working with these systems, so I might be missing something obvious. Thanks in advance.
Nevermind that -- I just discovered that you can't bridge two VXI chassis with VXI-MXI-2 boards if you're using a GPIB-VXI board as the controller. So, I'll just have to find another way to accomplish what I need to do.
-
Error Implementing Oracle Projects Resource Management
I'm implementing Oracle Resource Management and I've followed all the requirement/steps in the Implementation Guide. I realized that after I changed the flag "Include in Utilization" to Yes in the Job Definition, the request showed me the following error in log:
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.WE8ISO8859P1
Enter Password:
REP-1401: 'beforereport': Fatal PL/SQL error occurred.
ORA-06503: PL/SQL: Function returned without value
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-1401: 'beforereport': Fatal PL/SQL error occurred.
ORA-06503: PL/SQL: Function returned without value
Thanks in Advance.Hi Dean and Dina,
Thanks for your answers. Following is the missing info:
- Yes, we are using the AIA PIP
- We are using 'Workplan enabled' projects for integration with a 'Partially Shared Structure'
- In integration options, we are only integrating 'Workplan' with a 'Working Version'
- We are trying to send only progress information from P6 to Oracle Projects, not the time card info
Iniitially, when trying to send progress from P6 to Oracle Projects, we were getting the error - 'You cannot update a published version of the workplan'
However, after checking the following flags, we stopped getting any errors in AIA/middleware and still not getting any data into Oracle Projects:
Projects --> Setup --> Integration settings:
Integrate - Workplan - Send Task - Current Working Version
Integrate - Workplan - Receive Task
Workplan --> setup:
Allow Physical Percent Complete Collection
Allow Physical Percent Complete Overrides
Thanks for your help. -
Setting Resource Manager to start at boot automatically
I am putting together a script to automatically install multiple vendor software packages for a test system. As part of that script, it would be nice to set the Resource Manager configuration to start at boot.
Is there a registry setting or equivalent that I can set (instead of providing manual instructions such as listed at Configuring the VXI Resource Manager to Run at Startup )?Not sure how much detail you are looking for. I did this by setting up a start/stop script in /etc/init.d (chkconfig 345 91 10).
Since I still run the backend (database) as the ORA_OWNR and only run the webservice as root, I start this in a two step process.
the shutdown is a 3 step process because the node_manager gets left running until the stopall command is issued.
Code excerpt:
case "$1" in
start)
# Oracle listener and instance startup
echo -n "Starting Oracle: "
# Changed ses to run as root so that the webservice can bind to port 80 instead of port 7777
# Backend (aka ses database) still needs to run as ora_ownr, so start becomes a
# two step process
su - $ORA_OWNR -c "$ORA_HOME/bin/searchctl start_backend < /home/$ORA_OWNR/.tmp_passwd.txt"
$ORA_HOME/bin/searchctl start < /home/$ORA_OWNR/.tmp_passwd.txt
touch /var/lock/subsys/oracleses
echo "OK"
stop)
# Oracle listener and instance shutdown
echo -n "Shutdown Oracle: "
# mid-tier owned and stopped by root. backend owned and stopped by ora_owner
# node manager is left running by stop command (root), so a stopall needs to be re-issued
# after the database has come down.
$ORA_HOME/bin/searchctl stop < /home/$ORA_OWNR/.tmp_passwd.txt
su - $ORA_OWNR -c "$ORA_HOME/bin/searchctl stop_backend < /home/$ORA_OWNR/.tmp_passwd.txt"
$ORA_HOME/bin/searchctl stopall < /home/$ORA_OWNR/.tmp_passwd.txt
rm -f /var/lock/subsys/oracleses
echo "OK"
reload|restart)
$0 stop
$0 start
echo "Usage: $0 start|stop|restart|reload"
exit 1
esac -
Unable to install Windows Server 2012 Feature - [Tools] File Server Resource Manager Tools.
Installs, however when I restart the server error messages appears saying feature unable to install, windows reverting changes.
In the Setup event logs have the following information message "Update FSRM-Infrastructure of package FSRM-All failed to be turned on. Status: 0x800f0922"
Does anyone have any idea's on why this Feature can not be installed ??
ScottHi Shaun
Tried both of your suggestions, however neither strategy worked.
Strategy 1
Tried installing via powershell - "install-windowsfeature -name fs-resource-manager -includemanagementtools"
Feature un-installed itself during the restart.
Attempted to use the command "DISM /online /remove-feature /featurename:FSRM-Infrastructure-Services". However
this did work because one the Service was'nt installed or two because there was no command option for "/remove-feature"
PACKAGE SERVICING COMMANDS:
/Add-Package - Adds packages to the image.
/Remove-Package - Removes packages from the image.
/Enable-Feature - Enables a specific feature in the image.
/Disable-Feature - Disables a specific feature in the image.
/Get-Packages - Displays information about all packages in the image.
/Get-PackageInfo - Displays information about a specific package.
/Get-Features - Displays information about all features in a package.
/Get-FeatureInfo - Displays information about a specific feature.
/Cleanup-Image - Performs cleanup and recovery operations on the image.
Strategy 2
Tried installing via powershell, using the following command DISM
/online /enable-feature /featurename:FSRM-Infrastructure-Services, however got the same result, the install backed out during the restart.
All up back to where I started?
Maybe you are looking for
-
Hi Friends I am posting Goods receipt for stock transfer order (with mov type 351) in receiving plant and getting following error 1.System is also giving msg (green) as excise invoice does not exist in sending plant 2. Excise Duty is appearing as 0.0
-
Safari can't open certain web pages?
There are certain webpages, such as my credit report AMEX site that will open up in Windows and not on a MAC (using Safari, or Firefox). When I click on a button nothing happens or I get a blank page.
-
Creating view to get instances to user in wich he has taken part
hellow. I have a question. I should to create custom view inside Oracle BPM. This view should get only instances in wich current user has taken part, for a example, some user "test" has assigned in the instance to make some task. Part "Test" has done
-
AHHH "iTunes has encountered a problem and needs to close."
iTunes has encountered a problem and needs to close. AHHHHHHHHHHHHHHHHHHHHHHHHHHHH, im tired of seeing that error as soon as i open up soon as i updated it, it stopped working, i've searched searched and searched but i can't find anything, this is re
-
Organizing Photos within an Album - PSE8
Once I've put a bunch of photos into an album, is there an easy way to sort them without moving the photos one-by-one? For instance, suppose I want to organize them by date? I've just got to think there's an easy and automated way to do that, but i