VXI USB resman fails to recognize VXI technology cards

Using the new USB VXI controllers, resman fails to recognize the VXI technology card in the system. version 3.5 NIVXI. VXI tech card is VM9000 base unit, VM6068, VM1602 and VM3618. Does anyone know the trick to get this working. It works fine in my old MXI system and works fine with an old embedded controller.

Thanks for the reply but I don't think that is the problem. I have many other cards in the system and they have no problem just this one card with three addresses on it in one slot. I think it is a bug in the NI resman software or a bug in the VXITech cards. But since the VXITech cards work fine in the old systems that I have I think it is a bug in the USB VXI software. But I need NI to explain or help find this.

Similar Messages

Android Update -- now fails to recognize SD Card!

Android did an automatic update yesterday, and suddenly failed to recognize the SD Card. It keeps telling me the card has been removed and that I need to insert a new one.
This device has been rebooted, cache cleared, card viability verified. What gives?

Hi dont-have-time-for-this,
SD card issues are no fun, I feel you! I also have a Galaxy S3 and when I received my software update I did a factory reset http://bit.ly/LfV00q after installation to prevent any system conflicts and post update issues, and I have not experienced any issues with my SD card. Try it and keep us posted.
AntonioC_VZWSupport
Follow us on Twitter at www.twitter.com/VZWSupport

Where to find a driver for a seagate product or the operating system (OS) fails to recognize a seagate drive

Where to find a driver for a seagate product or the operating system (OS) fails to recognize a seagate drive
Name : Seagate Backup+ BL Media
          Type :           Disk
          Partition Map Scheme :           Master Boot Record
          Disk Identifier :           disk1
          Media Name :           Seagate Backup+ BL Media
          Media Type :           Generic
          Connection Bus :           USB
          USB Serial Number :           NA5B83S2
          Device Tree :           IODeviceTree:/PCI0@0/XHC1@14
          Writable :           Yes
          Ejectable :           Yes
          Location :           External
          Total Capacity :           1 TB (10,00,20,48,85,504 Bytes)
          Disk Number :           1
          Partition Number :           0
          S.M.A.R.T. Status :           Not Supported

Seagate website.
Why don't you reformat the drive in Disk Utility or Terminal. Screw that rubbish backup software on the seagate drive.

HT6437 iTunes fails to recognize iPhone

I am attempting to backup/restore my iPhone 4S running iOS 7.1.2, to my new iPhone 6 Plus running iOS8.1.2.
Unfortunately, iTunes 12 fails to recognize my iPhone device. Therefore, it's impossible to Backup or Synch.
Any ideas to correct this? Do I have to update my ancient iPhone 4S to iOS 8.1.2 first? I tried different USB cables, no luck. I tried stop/re-start iTunes.

Hello there, dpharbison.
When transferring content from an older iOS device to a new one using iTunes, the following Knowledge Base article offers the steps on how to accomplish that:
Transfer content from an iPhone, iPad, or iPod touch to a new device - Apple Support
Use iTunes
If you don't have an iCloud account or you just want to keep a backup on your computer, you can use iTunes to back up and transfer content on your device.
Get ready
Install the latest version of iTunes on your computer and the latest version of iOS on your original device.
You can't install a backup of a newer version of iOS onto devices that are using earlier versions of iOS. If your backup came from a device that has a newer version of iOS installed, update your new device before you transfer your data. For help, see Unable to restore from a backup of a newer iOS device.
Back up and transfer
First, back up your old device using iTunes. You can also encrypt the backup so that it remembers the passwords for your email, Wi-Fi, and more when you transfer to the new device. Otherwise, you can re-enter these passwords on the new device.
Then transfer your data from your device to your computer.
Remove your SIM card
If your device has a SIM card, use the SIM-extractor tool or a paper clip to remove the SIM from your old device and insert it into your new device. Or if your carrier gave you a new SIM card, use that instead.
Set up the new device
When the backup of your old device is finished, turn on your new device. Follow the setup assistant, which will ask you to choose these things:
Your language and country
Whether to enable Location Services
A Wi-Fi network
If you don’t have a Wi-Fi or cellular data connection, you can also activate by tapping Connect to iTunes.
Restore the backup
When prompted to set up your device, select Restore from iTunes Backup.
Connect to iTunes
Connect your new device to iTunes, using the same computer you used to back up your current device. iTunes will ask you to restore from backup or set up as new. Select the backup of your old device and choose Continue.
If the progress bar in iTunes pauses for a while, wait until the restore finishes.
Sync other content
When the restore finishes, your device restarts, and then it's ready for you to use.
Keep your device connected to iTunes to sync content that isn't in the backup (such as music, videos, and apps). To change the type of content that syncs, click the syncing tabs in iTunes.
Enter your passwords
If you restored from an unencrypted backup, you'll need to enter the password for your Apple ID, email and other accounts, and voicemail. If you've forgotten your voicemail password, contact your carrier.
If your device continues to not be recognized, these article provide further troubleshooting depending on the operating system your computer is running:
iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
or
iOS: Device not recognized in iTunes for OS X - Apple Support
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Windows 7 64bit has an MTP USB Device Failed error message when I attach my Ipad1

I keep getting an MTP USB Device Failed error message when I plug in my USB cable into my Ipad1. Can someone help?

This is NOT resolved. The "Upper..."Key in the registry editor doesn't exist as you can see below in the image I am providing. This is still an OUTSTANDING issue, can someone please help with resolving this issue, super frustrating.
This is not just an iPAD issue, I get the same problem with my iPhone as well, both (iPhone and iPad) have the latest iOS 6.1.3 installed as well.

USB device failed, when I plug in iPhone 4S running windows 7 (64bit)

When I plug in my 4s it says USB device failed. In details it says that windows terminated the process (error 43) I tried telling it to use the apple mobile device driver, but that errors as well. I last synced this phone in June, with no issues. I have uninstalled and re installed iTunes. I'm scratching my head now. Any help is appreciated

Thanks alot mate, Sloved my problem

Mtp usb device failed error - iphone 3g - win 7 pro

I have iphone 3g. I use Win 7 pro OS. when i plug in iphone to usb port, i get error message as - device driver failed to install - in detail - mtp usb device failed..
In iTUNES i am able to view the iphone, sync my contacts with MS outlook etc..
kindly help
shansui

What a load of hogwash.
I've just had this error come up - WITH NO CHANGE OTHER THAN UPGRADE OF IPHONE 4 TO IOS 5.1.1.
(running iTunes 10.6.1.7 on 64 Win7)
Powered phone off, and back on again - same error... Haven't had to reinstall windows in a few years - maybe iTunes is now the least stable software in my collection - Might have to try the two (button) salute to Apple...
Error on device "MTP USB Device";
"This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)"

When I plug in my IPOD Nano into a USB port, the computer recognizes it as a printer. It then attempts to install the printer software, which is already installed. The only way to fix it is to unplug the printer. Any thoughts?

When I plug in my IPOD Nano into a USB port, the computer recognizes it as a printer. It then attempts to install the printer software, which is already installed. The only way to fix it is to unplug the printer. Any thoughts?

Turn the printer off.

HP M8100N pavilion usb ports no longer recognizes external drive

My Paviilion M8100N USB ports no longer recognizes my external drives. I have VISTA premium operating system.

The entire document and tutorial can be found here.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

W500 w/ Windows 7 64-Bit Ultimate fails to recognize some audio CDs

My DVD/CD drive (a HL-DT-ST_DVDRAM_GSA-U20N) in my Lenovo W500 laptop (running Windows 7 64-Bit Ultimate) fails to recognize some audio CDs.
It recognizes most audio CDs, but a few are not recognized by Windows 7 itself, or by any other program on my computer.
These CDs are recognized by other Windows 7 computers.
I don't think that it's a copy protection issue, since the CDs don't mention any copy protection scheme (and also since they work on other Windows 7 machines).
One CD that wasn't recognized by my machine was the second CD from a two CD set (the first CD was correctly recognized).
I have the latest updates for Windows, and all my programs, drivers, BIOS & firmware.
Thanks.

What kind of behavior are you getting from the drive? If it's spinning up, down, and up again your lens might be dirty or the drive could be failing.
If you do clean the lens, be careful. Do your research first or you might make it worse.
Edit: Replacements are:
42T2511 or 42T2541 (DVD)
42T2543 or 42T2513 (DVD/CD-RW combo)
42T2545, 42T2515 or 42T2551 (DVD-RAM/RW)
You can get the 42T2543 for $23 and the 42T2545 for $45 on eBay.

I iPad 3 fails to recognize cellular data In a number of locations Displays "searching and No Service" I have narrowed this to device problem. What can I do?

i iPad 3 fails to recognize cellular data In a number of locations Displays "searching and No Service" I have narrowed this to device problem. What can I do?

Hello there, OSOSANYA.
The following Knowledge Base article provides a great checklist of steps and additional recommendations for troubleshooting issues with cellular connection:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Follow these steps for help troubleshooting cellular data issues on your iPhone. After performing each step, please test to see if the issue is resolved.
Toggle airplane mode: Tap Settings, turn airplane mode on, wait three seconds, and then turn off again.
Restart your iPhone.
Make sure that your software is up to date:
Check for a Carrier Settings Update: Tap Settings > General > About.
Check for an iOS Software Update: Tap Settings > General > Software Update.
Note: Some updates may require a Wi-Fi connection.
Remove the SIM Card and reinsert it. Allow the iPhone to acquire the network again.
If your SIM card has SIM PIN enabled, try turning it off: Tap Settings > Phone > SIM PIN.
Try another location. If a different location works, but the original location still doesn't, contact your carrier to report the issue.
Reset network settings: Tap Settings > General > Reset > Reset Network Settings.
Restore the iPhone as new.
Contact your carrier to:
Verify that the iPhone is properly set up on the account with the appropriate, current data plan.
Verify that there are no account-related blocks.
Find out if there are specific error messages in the carrier logs that could help determine why the issue is occurring.
If none of the above steps resolves the issue, contact your carrier, make an appointment at an Apple Retail Store, or contact AppleCare to troubleshoot further.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Scandisk or defrag fail to recognize hd volume

hello all, and happy holidays.
i've had this issue b4 but didnt pay too much attention to it, but now it has happened again so i am a bit bothered.
i have seagate 7200.7 120GB sata drive with ncq hooked to the nvidia sata controller #2.
The drive has 8 volumes (c-j), c,d,e,g,h are ntfs, the others fat32.
Sometime when my computer hangs and i've to reset it, scandisk fails to recognize some volumes (totally random this time f,i, always fat32) as valid win xp volumes.
I can still open these volumes and read and write to them, but cant run defrag (i use disk keeper pro) on them, or for that matter anyother hdd tools like windows scandisk etc.
Now when ever i reboot, scandisk kicks in complaining that it cant scan non-xp drives.
My options include turning off scandisk, reformatting (loads of data on them, really not a good option), find out whats causing it!!
So anyone here help me work on option three
Rest of the system is in the signature.
thanks.

4184
Hello again tcdm1972,
This quote from a MicroMat technician is misleading and makes me wonder about abusingly promoting defragmentation (and using their products) as so necessary.
Yes, in certain rare cases one might benefit from defragmenting HD and HD free space, but in Mac OS X it is not so black and white question.
- In the more general usage of Mac OS X, defragmentation is actually counter-productive and defeats the very clever way Mac OS X has to rewrite every file on-the-fly onto the best possible location at this very moment, each time an application uses it.
Best location on the hard drive varies, depending on many more criteria than the simple contiguity.
About the term "optimization" in Apple software installs:
I find it misleading too, as all it optimizes is the launching of applications in Mac OS X
(it's the "update_prebinding" command really, nothing to do with defragmentation).
About OnyX, Yasu etc:
These too are small utilities to run quite harmless Terminal commands. They don't play in the same fields, nothing neither to do with defragmentation.
DiskWarrior too has yet another approach: Directory handling.
So, your original question about using iDefrag:
On their website they state
"To defragment your boot volume, you need to boot from a different volume"
as I said.
In your case, the solution is clear:
since you have two boot partitions on your HD,
- boot from Partition 1 to defrag Partition 2,
and
- boot from Partition 2 to defrag Partition 1.
That is, a copy of iDefrag installed on each of your Mac OS X volumes.
Axl

Help MTP usb device failed N97

When connected N97 via cable to pc ( windows 7 ) " MTP usb device failed" and cant see N97 in Pc suite. In mass storage mode work fine.
Please HELP.

Download ovi suite for n97 and your issue will be resolved.
When u connect ur n97 for the first time after installation make sure to press install on whatever the phone is being prompted to install. Oh and one more thing .. make sure you restart your phone and your pc before doing all this
Message Edited by agha_ali on 31-Jan-2010 11:11 AM

PE 9 always fails when installing shared technologies.

I even paid for it (I know theres no diffrence) but I always get the same error (Adobe Premiere elements failed to install shared technologies. Rolling back changes). I have windows 7 x64 And after 3 HOURS of waiting of the phone for a rep, I decided not to contact them for any info. PE 7 installed fine, but they don't work on windows 7.

Use task manager to see if you have any other Adobe software running in the background - Adobe Bridge is often the culprit for these installation errors. If you find anything running then use End Process.
Cheers,
Neale
Insanity is hereditary, you get it from your children

Install of Elements trial fails when installing Shared Technologies

Have tried installing the Elements 10 trial on both an XP Pro and a Win7 Pro PC and have the same problem.
Install of trial fails when installing Shared Technologies and then rolls back the install of the Elements Organiser.
Anyone seen this before? Any ideas?

Can you please make your question a seperate thread?
It would be helpful if you could please provide us the install log for it. Install logs can be found at C:\Program Files(x86)\Common Files\Adobe\Installers\ with name Elements STI Installer 1.0 <date>.log.gz
Use a decompression utility such as Winzip to uncompress the .gz file. Once uncompressed, you will have a new file without the .gz extension. The filename could now be something like "Elemens STI Installer 1.0 11-21-2012.log."
Open the .log file using notepad
Copy the whole log and paste it here.
http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-installation-photoshop-elements- premiere.html#main_Error__Below_mentioned_applications_have_failed_to_install__Shared_tech nologies_

VXI USB resman fails to recognize VXI technology cards

Similar Messages

Maybe you are looking for