VXIpc-872 freezes after restart or after BIOS update save

I have a VXIpc-872 Slot 0 Controller. Unit will boot windows NT from Cold start, but performing a windows restart or following any BIOS modifications the controller freezes. Only get a solid black screen. Power OFF has been the only way to clear it.
Any thoughts on what might be wrong?

Hi Jason,
We have a really good Developer Zone article on the subject, you can find it here.
Restoring or Changing the Operating System in a VXIpc-770/870B Series Embedded Controller
http://zone.ni.com/devzone/cda/tut/p/id/3988
Thanks
Scott M.
Applications Engineer
National Instruments

Similar Messages

Recovered files gone after restarting Muse after Update

Muse quit unexpectedly while I was working on several websites in that were in recovery mode. When I restarted Muse, it told me that an update was available. After restarting Muse after the update, it did not attempt to recover the files that I was working on. Are the changes that I made lost forever, or can I find them stored somewhere on my computer? I have a current time machine back up. Will that be helpful?

Muse does not recover files from older versions of Muse.
The Muse team recommends you save any work in progress before updating Muse to a new version.
If you have a timemachine backup of the recovery files and the unsaved changes are important to you, you should be able to recover them by doing the following:
1. Look for the Muse recovery files in your time machine backup. They should be here:
/Users/your-user-name/Library/Preferences/AdobeMuse/Local Store/Recovery
Restore that folder to just before you did the update to Muse version 6.
2. Uninstall/delete Muse 6
3. Install Muse version 5.0 from here: http://labsdownload.adobe.com/pub/adobemuse/builds/muse_5-0_update_mac.dmg
4. Launch Muse version 5. Do not update. It should recover your files.
5. Save your file(s)
6. quit Muse, launch again, update to version 6.

B75MA-E33 - long time to post after installing most recent bios update

I installed the bios update from the product page for this motherboard and flashed it directly from the utility within the bios. It installed fine, but after installing this update the post time has increased from about 10 seconds to anywhere between one and five minutes. It sits on the screen with the "A2" code in the bottom right corner before loading the msi splash screen. I searched the forum but didn't see anyone else reporting this. Anyone have any idea what's causing this? I verified that the settings in the bios haven't changed.

Quote from: flobelix on 02-March-13, 22:59:41
Solution? Thanks? This is not your thread. Topic starter has been asked to post system details.
I guess you misunderstood my post.What I was that I have a similar motherboard and I was planning on updating the BIOS.He reported about this issue and I'm thankful to him for that.

ThinkPad S230u won't wake up after IRST sleep since BIOS update

I am using S230u (i7 CPU, 8GB RAM, 500GB HDD+24GB SSD) with Windows 8 x64 for half a year now and so far everything has worked just fine.
I have IRST enabled and when I put it in sleep mode, it automatically saves the state to SSD after an hour. That has worked great so far - I can put it to sleep for short periods and get it up instantly and if I put it to sleep for longer it will save to SSD and not use battery - when I wake it up, it flashes the red LED for a while and system comes back online.
However, this Friday I installed BIOS update - updated from 1.57.1.57 to 1.61.1.61 (at least according to System Update history).
Since Friday when I try to wake it up it does not work if the sleep is longer than an hour (or so) and the state was stored to SSD. The red led keeps flashing, but nothing happens - after around 1-2 minutes the system reboots and Windows loads again.
I want to downgrade the BIOS and doublecheck that this is the issue - perhaps it is some other Windows or Lenovo patch, so I want to be sure.
I have already located the BIOS drivers downloads (http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS032000) and am wondering if downgrading BIOS to check if this is the issue can break anything with my laptop?
Solved!
Go to Solution.

We are working on the BIOS defect that causes this failure. I'm very sorry for this inconvenience.
While downgrading the BIOS is a possible work-around, my advice is to simply disable the 30-Day standby feature in Lenovo Settings, until the new BIOS to fix this issue is released.

My HP Envy touch screen stopped working after getting an HP Bios update yesterday

Can someone please tell me how to fix my touch screen. I received an HP BIOS update which caused my touch screen to stop working. I've tried re-calibrating it but it won't accept my touch which tells me the screen is no longer enabled.
I tried finding where to enable and could not find where to enable finger touch. I've also tried looking for driver updates and the driver appears to be up to date.
Thanks
This question was solved.
View Solution.

I have a different type of TouchSmart, but this may work for you:
Press the Windows logo key + X (if using a Windows 8 computer -- if Windows 7, click the Start button, type Device Manager, and click Device Manager in the search results).
Select Device Manager from the list.
Click the little arrow next to Human Interface Devices to expand the list.
Click the touch screen driver (in my case, NextWindow Voltron Touch Screen).
Right-click, and select Enable from the list.
Click Yes if a dialog box asks if you are sure you want to enable the touch screen driver.
On some models, it isn't obvious which device in the list controls the touch screen. I have read in other posts that some people have fixed the problem by disabling and re-enabling each device.
If that does not work, you might try going to hp.com (http://www8.hp.com/us/en/support-drivers.html) and clicking Drivers & Downloads.
In the search field, enter your product name or number, and then click Go. Select your operating system from the drop-down list under Select your operating system, and then click Next. If there are any available graphics drivers under Select a download below, click the plus sign next to Driver - Graphics, and then click the driver name. In the Download options and information window, click Download . Follow the onscreen directions to download the driver. Restart the computer.
~Lil.Liebe
Clicking the white KUDOS THUMBS UP on the right is a way to say thanks!
Click Accept as Solution on a reply that solves your issue to help others in search of answers.

Satellite A110: Graphic card is only at 64MB after traditional 1.70 Bios update

Hi!!
I have toshiba satellite A110. I've upgraded my bios to 1.70 version but now my video card is only at 64MB.
What can I do to make my video card back to 128mb or where can I find the traditional bios update for this version of bios.Thanks

Intel(R) Graphics Media Accelerator Driver for Mobile Report
Report Date: 06/25/2007
Report Time[hr:mm:ss]: 10:41:16
Driver Version: 6.14.10.4833
Operating System: Windows XP* Professional, Service Pack 2 (5.1.2600)
Default Language: English
DirectX* Version: 9.0
Physical Memory: 502 MB
Minimum Graphics Memory: 8 MB
Maximum Graphics Memory: 64 MB
Graphics Memory in Use: 8 MB
Processor: x86 family 6 Model 14 Stepping 8
Processor Speed: 1862 MHZ
Vendor ID: 8086
Device ID: 27A2
Device Revision: 03
* Accelerator Information *
Accelerator in Use: Mobile Intel(R) 945 Express Chipset Family
Video BIOS: 1264
Current Graphics Mode: 1280 by 800 True Color (60 Hz)
* Devices Connected to the Graphics Accelerator *
Active Notebook Displays: 1
* Notebook *
Monitor Name:
Display Type: Digital
Gamma Value: 2.20
DDC2 Protocol: Supported
Maximum Image Size: Horizontal: Not Available
Vertical: Not Available
Monitor Supported Modes:
1280 by 800 (60 Hz)
Display Power Management Support:
Standby Mode: Not Supported
Suspend Mode: Not Supported
Active Off Mode: Not Supported
* Other names and brands are the property of their respective owners.
I hope this is helpfull.

Mac Pro freezes or restarts shortly after startup

Hello,
My Mac Pro has developed a habit of freezing (including mouse pointer) a while (some 10 minutes) after powering on the machine. After a forced restart the problem has disappeared for the rest of the day. On some days the computer spontaneously restarts a while after powering on and then the problem is more persistent, with the light on the front flashing and the machine not getting through powering up at all. What then helps is removing and putting back the video card. I have already replaced the video card with a new one, after which the problem had disappeared for several weeks, but now it is fully back again.
Several runs with TechTool Pro did not reveal any hardware problem.
Can someone advise on how to diagnose the freezes etc. or even how to solve it?
Below is an error report produced after a forced restart.
Thanks for any answers!
Interval Since Last Panic Report: 493877 sec
Panics Since Last Report:          1
Anonymous UUID:                    D7488D0B-AFE4-4AEF-B57E-147CF4D971A0
Tue May 8 20:01:18 2012
Machine-check capabilities (cpu 6) 0x0000000000000806:
family: 6 model: 23 stepping: 6 microcode: 1547
Intel(R) Xeon(R) CPU           E5462 @ 2.80GHz
6 error-reporting banks
threshold-based error status present
Machine-check status 0x0000000000000005:
restart IP valid
machine-check in progress
MCA error-reporting registers:
IA32_MC0_STATUS(0x401): 0x1000000020000000 invalid
IA32_MC1_STATUS(0x405): 0x0000000000000000 invalid
IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
IA32_MC3_STATUS(0x40d): 0x0020000000000000 invalid
IA32_MC4_STATUS(0x411): 0x0000000000000011 invalid
IA32_MC5_STATUS(0x415): 0xb200000084200e0f valid
MCA error code:            0x0e0f
Model specific error code: 0x8420
Other information:         0x00000000
Threshold-based status:    Undefined
Status bits:
   Processor context corrupt
   Error enabled
   Uncorrected error
panic(cpu 6 caller 0xffffff80002c2c95): "Machine Check at 0xffffff7f8192d876, registers:\n" "CR0: 0x0000000080010033, CR2: 0x0000000000099000, CR3: 0x00000000268f2000, CR4: 0x0000000000000660\n" "RAX: 0x0000000000000000, RBX: 0x0000000000000000, RCX: 0x0000000000000001, RDX: 0x0000000000000000\n" "RSP: 0xffffff80f23fbc10, RBP: 0xffffff80f23fbc40, RSI: 0x0000000000000001, RDI: 0xffffff80e9afe148\n" "R8: 0xffffff8013f2c000, R9: 0xffffff80157da180, R10: 0x0000000000000c00, R11: 0xffffff80002d8220\n" "R12: 0x0000000000000001, R13: 0x0000000000000148, R14: 0xffffff8013f2c000, R15: 0xffffff8013da5040\n" "RFL: 0x0000000000000046, RIP: 0xffffff7f8192d876, CS: 0x0000000000000008, SS: 0x0000000000000010\n" "Error code: 0x0000000000000000\n"@/SourceCache/xnu/xnu-1699.24.23/osfmk/i386/trap_native.c: 278
Backtrace (CPU 6), Frame : Return Address
0xffffff80e9b0dec0 : 0xffffff8000220702
0xffffff80e9b0df40 : 0xffffff80002c2c95
0xffffff80e9b0e0a0 : 0xffffff80002d83ef
0xffffff80f23fbc40 : 0xffffff7f8192643e
0xffffff80f23fbd20 : 0xffffff7f81927f68
0xffffff80f23fbdd0 : 0xffffff80002c41d4
0xffffff80f23fbdf0 : 0xffffff800022d2e5
0xffffff80f23fbe30 : 0xffffff800022dfd0
0xffffff80f23fbe90 : 0xffffff800022f383
0xffffff80f23fbef0 : 0xffffff80002157ff
0xffffff80f23fbf10 : 0xffffff800021bc5a
0xffffff80f23fbf70 : 0xffffff80002aeb80
0xffffff80f23fbfb0 : 0xffffff80002d8383
      Kernel Extensions in backtrace:
         com.apple.driver.AppleIntelCPUPowerManagement(167.3)[E08EC0D7-C364-3C57-A377-88 7B36241B1C]@0xffffff7f81924000->0xffffff7f8194dfff
BSD process name corresponding to current thread: WindowServer
Mac OS version:
11D50b
Kernel version:
Darwin Kernel Version 11.3.0: Thu Jan 12 18:47:41 PST 2012; root:xnu-1699.24.23~1/RELEASE_X86_
Model: MacPro3,1, BootROM MP31.006C.B05, 8 processors, Quad-Core Intel Xeon, 2.8 GHz, 8 GB, SMC 1.25f4
Graphics: ATI Radeon HD 4870, ATI Radeon HD 4870, PCIe, 1024 MB
Memory Module: DIMM Riser B/DIMM 1, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser B/DIMM 2, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser A/DIMM 1, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser A/DIMM 2, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser A/DIMM 3, 2 GB, DDR2 FB-DIMM, 800 MHz, 0x055D, 0x41505F4D503830305F424947320000000000
Memory Module: DIMM Riser A/DIMM 4, 2 GB, DDR2 FB-DIMM, 800 MHz, 0x055D, 0x41505F4D503830305F424947320000000000
Bluetooth: Version 4.0.3f12, 2 service, 11 devices, 1 incoming serial ports
Network Service: Ethernet 1, Ethernet, en0
PCI Card: ATI Radeon HD 4870, sppci_displaycontroller, Slot-1
PCI Card: ATI Radeon HD 4870, ATY,MotmotParent, Slot-1
Serial ATA Device: ST3500630AS P, 500,11 GB
Serial ATA Device: ST31000528AS, 1 TB
Parallel ATA Device: OPTIARC DVD RW AD-7170A
USB Device: WinTV HVR-900, 0x2040 (Hauppauge Computer Works, Inc.), 0x6502, 0xfd400000 / 3
USB Device: hub_device, apple_vendor_id, 0x9131, 0xfd300000 / 2
USB Device: Keyboard Hub, apple_vendor_id, 0x1006, 0xfd330000 / 6
USB Device: Apple Optical USB Mouse, apple_vendor_id, 0x0304, 0xfd333000 / 8
USB Device: Apple Keyboard, apple_vendor_id, 0x0221, 0xfd332000 / 7
USB Device: iP4700 series, 0x04a9 (Canon Inc.), 0x10d2, 0xfd310000 / 5
USB Device: Apple Cinema HD Display, apple_vendor_id, 0x9223, 0xfd320000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8206, 0x5d200000 / 3
USB Device: SoundSticks, 0x05fc (Harman International), 0x7849, 0x5d100000 / 2
FireWire Device: built-in_hub, 800mbit_speed
FireWire Device: unknown_device, unknown_speed

This is the most recent kernel panic report:
So what does it tell?
Fri May 11 21:35:47 2012
Machine-check capabilities (cpu 6) 0x0000000000000806:
family: 6 model: 23 stepping: 6 microcode: 1547
Intel(R) Xeon(R) CPU           E5462 @ 2.80GHz
6 error-reporting banks
threshold-based error status present
Machine-check status 0x0000000000000005:
restart IP valid
machine-check in progress
MCA error-reporting registers:
IA32_MC0_STATUS(0x401): 0x1000000020000000 invalid
IA32_MC1_STATUS(0x405): 0x0000000000000000 invalid
IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
IA32_MC3_STATUS(0x40d): 0x0020000000000000 invalid
IA32_MC4_STATUS(0x411): 0x0000000000000011 invalid
IA32_MC5_STATUS(0x415): 0xb200000084200e0f valid
MCA error code:            0x0e0f
Model specific error code: 0x8420
Other information:         0x00000000
Threshold-based status:    Undefined
Status bits:
   Processor context corrupt
   Error enabled
   Uncorrected error
panic(cpu 6 caller 0xffffff80002c2c95): "Machine Check at 0xffffff7f8192d876, registers:\n" "CR0: 0x000000008001003b, CR2: 0x00000000b010300c, CR3: 0x000000002927c000, CR4: 0x0000000000000660\n" "RAX: 0x0000000000000000, RBX: 0x0000000000000000, RCX: 0x0000000000000001, RDX: 0x0000000000000000\n" "RSP: 0xffffff80f29e3ba0, RBP: 0xffffff80f29e3bd0, RSI: 0x0000000000000001, RDI: 0xffffff80e9abc148\n" "R8: 0xffffff8013f2d000, R9: 0x0000000003000000, R10: 0x00007fff86f41e62, R11: 0xffffff80002d8220\n" "R12: 0x0000000000000001, R13: 0x0000000000000148, R14: 0xffffff8013f2d000, R15: 0xffffff8013da9f40\n" "RFL: 0x0000000000000046, RIP: 0xffffff7f8192d876, CS: 0x0000000000000008, SS: 0x0000000000000010\n" "Error code: 0x0000000000000000\n"@/SourceCache/xnu/xnu-1699.24.23/osfmk/i386/trap_native.c: 278
Backtrace (CPU 6), Frame : Return Address
0xffffff80e9acbec0 : 0xffffff8000220702
0xffffff80e9acbf40 : 0xffffff80002c2c95
0xffffff80e9acc0a0 : 0xffffff80002d83ef
0xffffff80f29e3bd0 : 0xffffff7f8192643e
0xffffff80f29e3cb0 : 0xffffff7f81927f68
0xffffff80f29e3d60 : 0xffffff80002c41d4
0xffffff80f29e3d80 : 0xffffff800022d2e5
0xffffff80f29e3dc0 : 0xffffff800022dfd0
0xffffff80f29e3e20 : 0xffffff800022f383
0xffffff80f29e3e80 : 0xffffff8000234a80
0xffffff80f29e3ee0 : 0xffffff8000234e97
0xffffff80f29e3f20 : 0xffffff8000550ddb
0xffffff80f29e3f60 : 0xffffff80005ca448
0xffffff80f29e3fb0 : 0xffffff80002d7f39
      Kernel Extensions in backtrace:
         com.apple.driver.AppleIntelCPUPowerManagement(167.3)[E08EC0D7-C364-3C57-A377-88 7B36241B1C]@0xffffff7f81924000->0xffffff7f8194dfff
BSD process name corresponding to current thread: SmartwareServerA
Mac OS version:
11D50b
Kernel version:
Darwin Kernel Version 11.3.0: Thu Jan 12 18:47:41 PST 2012; root:xnu-1699.24.23~1/RELEASE_X86_64
Kernel UUID: 7B6546C7-70E8-3ED8-A6C3-C927E4D3D0D6
System model name: MacPro3,1 (Mac-F42C88C8)
System uptime in nanoseconds: 641570540722
last loaded kext at 30418113307: com.apple.filesystems.autofs          3.0 (addr 0xffffff7f80feb000, size 45056)
last unloaded kext at 96790614638: com.apple.driver.CSRHIDTransitionDriver          4.0.3f12 (addr 0xffffff7f80de6000, size 8192)
loaded kexts:
com.apple.filesystems.autofs          3.0
com.apple.filesystems.ntfs          3.10
com.apple.driver.AppleHWSensor          1.9.4d0
com.apple.driver.AudioAUUC          1.59
com.apple.driver.AppleUpstreamUserClient          3.5.9
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.driver.AppleMCCSControl          1.0.26
com.apple.kext.ATIFramebuffer          7.1.8
com.apple.driver.AppleHDA          2.1.7f9
com.apple.ATIRadeonX2000          7.1.8
com.apple.driver.AppleUSBDisplays          317
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AppleMCEDriver          1.1.9
com.apple.driver.AudioIPCDriver          1.2.2
com.apple.driver.ACPI_SMC_PlatformPlugin          4.7.5d4
com.apple.driver.AppleLPC          1.5.3
com.apple.iokit.SCSITaskUserClient          3.0.3
com.apple.iokit.IOAHCIBlockStorage          2.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          33
com.apple.driver.AppleAHCIPort          2.2.0
com.apple.driver.AppleIntelPIIXATA          2.5.1
com.apple.driver.AppleIntel8254XEthernet          2.1.3b1
com.apple.driver.AppleUSBHub          4.5.0
com.apple.driver.AppleFWOHCI          4.8.9
com.apple.driver.AppleEFINVRAM          1.5.0
com.apple.driver.AppleUSBEHCI          4.5.8
com.apple.driver.AppleUSBUHCI          4.4.5
com.apple.driver.AppleACPIButtons          1.4
com.apple.driver.AppleRTC          1.4
com.apple.driver.AppleHPET          1.6
com.apple.driver.AppleSMBIOS          1.7
com.apple.driver.AppleACPIEC          1.4
com.apple.driver.AppleAPIC          1.5
com.apple.driver.AppleIntelCPUPowerManagementClient          167.3.0
com.apple.nke.applicationfirewall          3.2.30
com.apple.security.quarantine          1.1
com.apple.driver.AppleIntelCPUPowerManagement          167.3.0
com.apple.kext.triggers          1.0
com.apple.iokit.IOSurface          80.0
com.apple.iokit.IOBluetoothSerialManager          4.0.3f12
com.apple.iokit.IOSerialFamily          10.0.5
com.apple.driver.DspFuncLib          2.1.7f9
com.apple.kext.ATI4800Controller          7.1.8
com.apple.kext.ATISupport          7.1.8
com.apple.driver.AppleUSBAudio          2.8.2f5
com.apple.iokit.IOFireWireIP          2.2.4
com.apple.iokit.IOAudioFamily          1.8.6fc6
com.apple.kext.OSvKernDSPLib          1.3
com.apple.driver.AppleHDAController          2.1.7f9
com.apple.iokit.IOHDAFamily          2.1.7f9
com.apple.driver.ApplePolicyControl          3.0.16
com.apple.driver.AppleGraphicsControl          3.0.16
com.apple.iokit.IONDRVSupport          2.3.2
com.apple.iokit.IOGraphicsFamily          2.3.2
com.apple.driver.AppleSMC          3.1.1d8
com.apple.driver.IOPlatformPluginFamily          4.7.5d4
com.apple.driver.CSRUSBBluetoothHCIController          4.0.3f12
com.apple.driver.AppleUSBBluetoothHCIController          4.0.3f12
com.apple.iokit.IOBluetoothFamily          4.0.3f12
com.apple.driver.AppleUSBHIDMouse          170.4
com.apple.driver.AppleHIDMouse          170.4
com.apple.driver.AppleUSBHIDKeyboard          152.3
com.apple.driver.AppleHIDKeyboard          152.3
com.apple.iokit.IOUSBHIDDriver          4.4.5
com.apple.driver.AppleUSBMergeNub          4.5.3
com.apple.driver.AppleUSBComposite          4.5.8
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.0.3
com.apple.iokit.IOBDStorageFamily          1.6
com.apple.iokit.IODVDStorageFamily          1.7
com.apple.iokit.IOCDStorageFamily          1.7
com.apple.driver.XsanFilter          403
com.apple.iokit.IOATAPIProtocolTransport          3.0.0
com.apple.iokit.IOSCSIArchitectureModelFamily          3.0.3
com.apple.iokit.IOAHCIFamily          2.0.7
com.apple.iokit.IOATAFamily          2.5.1
com.apple.iokit.IONetworkingFamily          2.0
com.apple.iokit.IOUSBUserClient          4.5.8
com.apple.iokit.IOFireWireFamily          4.4.5
com.apple.iokit.IOUSBFamily          4.5.8
com.apple.driver.AppleEFIRuntime          1.5.0
com.apple.iokit.IOHIDFamily          1.7.1
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          177.3
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          331.3
com.apple.iokit.IOStorageFamily          1.7
com.apple.driver.AppleKeyStore          28.18
com.apple.driver.AppleACPIPlatform          1.4
com.apple.iokit.IOPCIFamily          2.6.8
com.apple.iokit.IOACPIFamily          1.4

MacBook pro freezes and restart and after restarting it gives me this message and please tell me how to fix this.

Interval Since Last Panic Report: 12958 sec
Panics Since Last Report:          4
Anonymous UUID:                    D945D588-F525-4E6B-8DB6-77A34BDBD6DA
Sun Jul 31 17:32:47 2011
panic(cpu 0 caller 0xffffff80002c268d): Kernel trap at 0xffffff7f811a637a, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x00000000000001c8, CR3: 0x0000000000100000, CR4: 0x0000000000000660
RAX: 0x0000000000510000, RBX: 0x0000000000000008, RCX: 0x0000000001510000, RDX: 0xffffff800bd29808
RSP: 0xffffff8076bf3f60, RBP: 0xffffff8076bf3fb0, RSI: 0xffffff800db09af0, RDI: 0xffffff800bd29808
R8: 0xffffff7f81fb572f, R9: 0x000000000ad8b189, R10: 0x0000000001ff0100, R11: 0x000000000001ff01
R12: 0x0000000008000040, R13: 0x0000000010000000, R14: 0x000000000e000040, R15: 0xffffff800bd29808
RFL: 0x0000000000010246, RIP: 0xffffff7f811a637a, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0x00000000000001c8, Error code: 0x0000000000000000, Faulting CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff8076bf3c20 : 0xffffff8000220702
0xffffff8076bf3ca0 : 0xffffff80002c268d
0xffffff8076bf3e40 : 0xffffff80002d7a3d
0xffffff8076bf3e60 : 0xffffff7f811a637a
0xffffff8076bf3fb0 : 0xffffff8000820057
      Kernel Extensions in backtrace:
         com.apple.iokit.IOSerialFamily(10.0.5)[9EF0ADC7-7D42-38C6-9BD8-185CB717F80E]@0x ffffff7f811a5000->0xffffff7f811b2fff
BSD process name corresponding to current thread: kernel_task
Mac OS version:
11A511
Kernel version:
Darwin Kernel Version 11.0.0: Sat Jun 18 12:56:35 PDT 2011; root:xnu-1699.22.73~1/RELEASE_X86_64
Kernel UUID: 24CC17EB-30B0-3F6C-907F-1A9B2057AF78
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 1633059019664
last loaded kext at 1623157865961: com.apple.iokit.IOAVBFamily    1.0.0d22 (addr 0xffffff7f8079c000, size 36864)
last unloaded kext at 1393757240736: com.apple.iokit.IOAVBFamily    1.0.0d22 (addr 0xffffff7f8079c000, size 36864)
loaded kexts:
com.ZTE.driver.ModemDriverMacEx    1.0.6d1
com.apple.driver.AppleIntelProfile    81
com.apple.driver.AppleHWSensor    1.9.4d0
com.apple.driver.AppleMikeyHIDDriver    122
com.apple.driver.AppleHDA    2.1.1f11
com.apple.driver.AppleMikeyDriver    2.1.1f11
com.apple.driver.AGPM    100.12.40
com.apple.driver.AudioAUUC    1.59
com.apple.driver.AppleUpstreamUserClient    3.5.9
com.apple.driver.AppleMCCSControl    1.0.24
com.apple.driver.SMCMotionSensor    3.0.1d2
com.apple.iokit.IOUserEthernet    1.0.0d1
com.apple.driver.AppleSMCLMU    2.0.1d2
com.apple.Dont_Steal_Mac_OS_X    7.0.0
com.apple.driver.AudioIPCDriver    1.2.0
com.apple.driver.ACPI_SMC_PlatformPlugin    4.7.0b2
com.apple.driver.AppleLPC    1.5.1
com.apple.GeForce    7.0.2
com.apple.driver.AppleMuxControl    3.0.8
com.apple.driver.AppleIntelHDGraphics    7.0.2
com.apple.driver.AppleIntelHDGraphicsFB    7.0.2
com.apple.filesystems.autofs    3.0
com.apple.driver.AppleUSBTCButtons    220.8
com.apple.driver.AppleUSBCardReader    3.0.0
com.apple.driver.AppleIRController    309
com.apple.driver.AppleUSBTCKeyboard    220.8
com.apple.iokit.SCSITaskUserClient    3.0.0
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
com.apple.BootCache    32
com.apple.iokit.IOAHCIBlockStorage    2.0.0
com.apple.driver.AppleFWOHCI    4.8.6
com.apple.driver.AirPort.Brcm4331    500.20.6
com.apple.iokit.AppleBCM5701Ethernet    3.0.6b9
com.apple.driver.AppleEFINVRAM    1.5.0
com.apple.driver.AppleUSBHub    4.4.0
com.apple.driver.AppleSmartBatteryManager    161.0.0
com.apple.driver.AppleAHCIPort    2.1.8
com.apple.driver.AppleACPIButtons    1.4
com.apple.driver.AppleUSBEHCI    4.4.0
com.apple.driver.AppleRTC    1.4
com.apple.driver.AppleHPET    1.6
com.apple.driver.AppleSMBIOS    1.7
com.apple.driver.AppleACPIEC    1.4
com.apple.driver.AppleAPIC    1.5
com.apple.driver.AppleIntelCPUPowerManagementClient    166.0.0
com.apple.nke.applicationfirewall    3.0.30
com.apple.security.quarantine    1
com.apple.driver.AppleIntelCPUPowerManagement    166.0.0
com.apple.iokit.IOAVBFamily    1.0.0d22
com.apple.nke.ppp    1.7
com.apple.driver.AppleProfileTimestampAction    81
com.apple.driver.AppleProfileThreadInfoAction    81
com.apple.driver.AppleProfileRegisterStateAction    81
com.apple.driver.AppleProfileReadCounterAction    81
com.apple.driver.AppleProfileKEventAction    81
com.apple.driver.AppleProfileCallstackAction    81
com.apple.iokit.AppleProfileFamily    81
com.apple.driver.DspFuncLib    2.1.1f11
com.apple.driver.AppleSMBusController    1.0.10d0
com.apple.iokit.IOSurface    80.0
com.apple.iokit.IOBluetoothSerialManager    2.5f17
com.apple.iokit.IOSerialFamily    10.0.5
com.apple.iokit.IOFireWireIP    2.2.3
com.apple.driver.AppleHDAController    2.1.1f11
com.apple.iokit.IOHDAFamily    2.1.1f11
com.apple.iokit.IOAudioFamily    1.8.3fc11
com.apple.kext.OSvKernDSPLib    1.3
com.apple.driver.AppleSMC    3.1.1d2
com.apple.driver.IOPlatformPluginFamily    4.7.0b2
com.apple.driver.AppleSMBusPCI    1.0.10d0
com.apple.driver.AppleGraphicsControl    3.0.8
com.apple.driver.AppleBacklightExpert    1.0.3
com.apple.nvidia.nv50hal    7.0.2
com.apple.NVDAResman    7.0.2
com.apple.iokit.IONDRVSupport    2.3
com.apple.iokit.IOGraphicsFamily    2.3
com.apple.kext.triggers    1.0
com.apple.driver.BroadcomUSBBluetoothHCIController    2.5f17
com.apple.driver.AppleUSBBluetoothHCIController    2.5f17
com.apple.iokit.IOBluetoothFamily    2.5f17
com.apple.iokit.IOSCSIBlockCommandsDevice    3.0.0
com.apple.iokit.IOUSBMassStorageClass    3.0.0
com.apple.driver.AppleUSBMultitouch    220.23
com.apple.iokit.IOUSBHIDDriver    4.4.0
com.apple.driver.AppleUSBMergeNub    4.4.0
com.apple.driver.AppleUSBComposite    3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.0.0
com.apple.iokit.IOBDStorageFamily    1.6
com.apple.iokit.IODVDStorageFamily    1.6
com.apple.iokit.IOCDStorageFamily    1.7
com.apple.driver.XsanFilter    403
com.apple.iokit.IOAHCISerialATAPI    2.0.0
com.apple.iokit.IOSCSIArchitectureModelFamily    3.0.0
com.apple.iokit.IOFireWireFamily    4.4.3
com.apple.iokit.IO80211Family    400.40
com.apple.iokit.IOEthernetAVBController    1.0.0d5
com.apple.iokit.IONetworkingFamily    2.0
com.apple.iokit.IOUSBUserClient    4.4.0
com.apple.iokit.IOAHCIFamily    2.0.6
com.apple.driver.AppleEFIRuntime    1.5.0
com.apple.iokit.IOHIDFamily    1.7.0
com.apple.iokit.IOUSBFamily    4.4.0
com.apple.iokit.IOSMBusFamily    1.1
com.apple.security.sandbox    165
com.apple.kext.AppleMatch    1.0.0d1
com.apple.security.TMSafetyNet    7
com.apple.driver.DiskImages    326
com.apple.iokit.IOStorageFamily    1.7
com.apple.driver.AppleKeyStore    28.18
com.apple.driver.AppleACPIPlatform    1.4
com.apple.iokit.IOPCIFamily    2.6.5
com.apple.iokit.IOACPIFamily    1.4
Model: MacBookPro6,2, BootROM MBP61.0057.B0C, 2 processors, Intel Core i5, 2.4 GHz, 4 GB, SMC 1.58f16
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 256 MB
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.100.98.75.6)
Bluetooth: Version 2.5.0f17, 2 service, 12 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: TOSHIBA MK3255GSXF, 320.07 GB
Serial ATA Device: MATSHITADVD-R   UJ-898
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0xfa120000 / 5
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa130000 / 4
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 3
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8218, 0xfa113000 / 7
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 4
USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0xfd110000 / 3

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Boot issue after shutdown plus power - no problem after restart or after removing power cord

Hello,
I have a Pavilion Elite m9275.nl desktop. I experience boot issues after a regular shut down.
After a regular shut down and pressing the power button within a few seconds/minutes, it keeps hanging in the HP startup / BIOS screen, Windows 8 won't boot, the hard drive light doesn't flash;
After a restart from Windows (instead of shut down) it boots correctly from the c-drive. No hard-drive problems at all;
After a shut down and removing the power cord for 10-15 minutes, it boots correctly from the c-drive. No hard-drive problems at all.
When the PC does not boot, F10 (to enter BIOS settings) does not work neither, so it seems to be a hardware or BIOS issue.
I already replaced the CMOS battery and already loaded default BIOS settings.
During a succesful boot or after pressing F10 (to enter BIOS settings) the screen shows some disk information right after the BIOS. This is the screen that says something like "press CTRL-I to start configuration utility". During a succesful boot the hard disk light flashes shortly before displaying that screen. During an unsuccesful boot the hard disk doesn't flash.
Before replacing a hardware component, I need to know what to replace...
Could it be the hard disk controller or hard disk is defect?
Where is the hard disk controller stored?
Can I upgrade the firmware of the hard disk controller?
BUT: why does it work when I remove the power cord for 15 minutes or after a restart (instead of a shutdown and than pressing power)?
Many thanks in advance,
Sjoerd-Jaap Westra

sjwestra
I apologize for the delay in responding to your post. First I am glad you were able to resolve your initial issue and to help I have included a link to a document 'Bios Setup Utility Information and Menu Options' that will provide you with instructions on how to enter the Bios and provides additional information on navigating it as well.
http://goo.gl/HIclUV
If you need any further information please re-post.
Thank you for your post.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

My iMac will not update to 10.6.8 Even after restarting, it will not update.

My iMac will not update to 10.6.8 even after clicking the restart button to update items. How can I update my iMac??

Welcome to Apple Support Communities
Sometimes the Software Update version doesn't work properly. If you can't install Mac OS X 10.6.8 from Software Update, install it through the Combo installer > http://support.apple.com/kb/dl1399
The Combo installer allows you to update multiple Macs with a single download. Also, it's safer because it gives less problems than a Software Update version

Stay in Safe Boot AFTER RESTART to finish an update?

It's often been recommended here to do an OS update while in Safe Boot.
If you go this route wouldn't it make sense, since, as I understand it, *the installation is still finishing up after the restart*, to do the restart, when prompted, while remaining in Safe Boot? It seems an ordinary restart brings you back to the full OS, partially defeating the purpose of the Safe Boot.
Maybe it doesn't matter, after all, but if that sounds useful, how best to do that? Click OK on the restart button from the installation prompt, while holding down the shift key, or shutdown completely, ignoring the prompt, and then power up again holding the shift key down? Must you restart using the installation prompt?

Great news!
You're mostly OK if you keep your Mac maintained once in awhile, you really don't have to be as anal as I am, unless you have untoward shutdowns or other strange happenings!

GE60 0NC-006US Webcam not working after Win8 upgrade or BIOS update

So, I upgraded my GE60 to Windows 8 a couple of weeks back and decided to install Skype this past weekend. Upon opening Skype, I was told that no webcam could be found. I checked Device Manager and sure enough, no instance of a webcam or driverless device was detected. Now, I did apply the newest BIOS just before upgrading so I assume that could have broken it as well. I followed the BIOS directions given by the instructions provided on the driver page and everything else works. Furthermore, Live Update says I have the most current version. I am wondering what to do next. Should I reapply the BIOS or how can I find out if the laptop even detects the webcam? I mean, not being in Device Manager and even the Devices window, reverting back to 7 probably wouldn't help since Device Manager shows no instance, correct?

Quote from: Svet on 12-September-12, 23:16:19
yes update EC too, and do ec reset when its done:
https://forum-en.msi.com/faq/article/how-to-reset-the-ec-embedded-controller
Thank you Svet for all of your help. I relayed my issue/resolution here at work and they're all getting a luagh out of it.

[SOLVED] Firefox won't open after restart..Until I updated everything

When I start my computer or reboot Firefox won't open unless I keep clicking the icon. I have it pinned to the task bar and it's set as default. when I click the icon it glows orange but then fades back to clear. sometimes as many as 15 - 20 times before it starts. I clean the temporary files every day with CCleaner. I'm not that computer smart but I haven't changed any settings and it was working perfectly until a few days ago. Once it opens I have o problems opening it and closing it
UPDATE:
I disabled the Facebook video call plug in updated all my Firefox stuff and it opened first try

Thank you Alice It took me two years to get Firefox looking exactly how I wanted it. I'm not very good with computers. I thought I would have to start over. The strange thing is there was no indication of a problem. It just wouldn't open. Skype kept crashing my computer so I followed their instructions on removing everything in the registry. I remembered something about Facebook video chat being through Skype so it just made sense to disable it. I didn't even know I had it until I updated the rest of the stuff. I don't know if that was it but Firefox is working and that's what matters.

Z68a-gd65 boot loop after bios update using USB

Hi there,
My z68a-gd65 (G3) went into a boot loop after I did a bios update from a USB key that I installed using the latest BIOS version on the MSI site 7681vP8.zip
After the system restarted, it keeps booting up for 5 seconds and then shutting down, I removed all external devices and the Geforce GTX 550 Ti card and used the onboard card, but still no change...
Is there a way to set the board to factory defaults again???
Marcel

Hi there,
Maybe for others to solve the same problem, I found out what was the cause of this problem, I had a USB/Firewire card installed in the PC, after removing it the BIOS update could proceed from the USB stick as planned.
After the update though, my USB/firewire card can still not be installed back into the slot, because doing so will make the boot loop appear again, very odd!
Does anyone know why this new BIOS will not work with the card that has been inside my PC for 2 years???
Marcel

Bluetooth OFF after restart / resume from sleep

Hi, i have problem with integrated Bluetooth in my T400s. If i start Windows from off state, BT is on and my BT mouse is connected correclty. But if i restart or go to sleep mode and back resume from sleep, BT stays OFF and i have to switch it on via Fn+F5. I tried to reinstall clean Windows 7 with all drivers through Lenovo System Update, but no solution. Does somebody have the same problem? Any idea?
Lenovo T440s, 20AQ0067MC, Windows 8.1 Pro x64 UEFI, Samsung 840 EVO SSD 250 GB, 8 GB RAM
Lenovo T430s, 2356LQG, Windows 8.1 Pro x64 UEFI, Intel 520 SSD 180 GB, 8 GB RAM
Lenovo T420s, 4171-6SG, Windows 8 Pro x64 UEFI, Intel 320 SSD 120 GB, 8 GB RAM
Lenovo T400s, 2808-CYG, Windows 7 Ultimate x64
Solved!
Go to Solution.

Unbelivable, crazy things happens. You are right, problem is solved.
1 - 2 weeks ago i tried Ubuntu, not installed, just run from USB flash and look how new one looks like
2 - probably from that time integrated BT did not start after restart or resume from sleep - really strange (i have WWAn as well but i do not use it)
3 - i tried to disable I/O Access for all devices in BIOS and set back On - that did not help
4 - i have loaded default setting in BIOS by F9 and saved and after restart BINGO BT mobule works even after restart or after resume from Sleep.
It is really strange for me, but yeahh, crazy things happend.
Thanks.
Lenovo T440s, 20AQ0067MC, Windows 8.1 Pro x64 UEFI, Samsung 840 EVO SSD 250 GB, 8 GB RAM
Lenovo T430s, 2356LQG, Windows 8.1 Pro x64 UEFI, Intel 520 SSD 180 GB, 8 GB RAM
Lenovo T420s, 4171-6SG, Windows 8 Pro x64 UEFI, Intel 320 SSD 120 GB, 8 GB RAM
Lenovo T400s, 2808-CYG, Windows 7 Ultimate x64

VXIpc-872 freezes after restart or after BIOS update save

Similar Messages

Maybe you are looking for