Вылетает Wi Fi, Что делать??? Problem with Wi Fi...
Дело в том, что 4 недели назад, я купил iMac 2.7 intel i5. Сразу как только я его включил, я подключил Wi Fi (FRITZ! Box o2 DCL модель 7270), все заработало я ничего не загружал, кроме обнавления ПО. И спустя минут 5 интернет пропал. Я посмотрел на состояние Wi Fi, там было написано, что все подключено и работает. Я попробывал еще раз проверить есть ли интернет, но его нет. Тогда я попробывал выключить и включить Wi Fi. И все опять заработало. Но проблема не решилась, интернет пропадает с разной переодичностью (3 минуты, 5, 10, самое долгое когда он есть 25 минут), но он пропадает, а wi fi показывает что подключен и все работает корректно. Причем на моем wi fi роутере прекрасно работают iPhone, iPad, MacBook, ноутбук Sony. По этому проблему с роутером я отмел. Что я только не перепробывал, все без результатно. Что это может быть??? Я спрашивал у продавцов, они сказали, что это может быть проблемма с картой Wi fi. Так ли это???
4 weeks ago, I bought the iMac 2.7 intel i5. As soon as I turned it on, I connected Wi Fi (FRITZ! Box o2 DCLmodel 7270), it worked, I did not uploaded any, except updatings software. And after about 5 minutes gone Internet. I looked at the state of Wi Fi, it was written that everything is connected and working. I try once againto check whether the internet, but it is not. Then I try to switch off and turn on Wi Fi. And once again working. But the problem persists, the internet is lost at different period (3 minutes, 5, 10, the longest when it is 25 minutes), but it disappears, and the wi fi show that is connected and everything is working correctly. And on my wi fi router work fine with iPhone, iPad, MacBook, notebook Sony. On this issue with the router, I dismissed. I try all, all without Scoring. What could it be?? I asked the sellers, they said that it could be problemma with card Wi fi. Is this true??
У меня окно с выбором сети WIFI выходит при каждом входе в сеанс. Почему то система не запоминает мою сеть и мне приходиться каждый раз её выбирать заново
На iphone, ipad, appleTV все нормально.
Что можно предпринять?
Similar Messages
-
A serious problem with flush 11.3 on Windows XP! Forgive assistance.../Серьёзная проблема с флешем..
Я вчера поставил и обнаружил проблему со звуком.(если смотреть видео с звуком(разумеется) или слушать муз через инет(браузер(вообщем где задействован хоть как то флеф-плеер) звук какой то с разрывами(слушать не возможно).... Это как и в флеше для так и на других браузерах. Пробовал на ,,,,, Opera Next 12.00 1351, Maxthon 3 и даже на Lunascape6 не на одном из этих браузерах звук не был нормальным.
Наверное будем ждать беты 2. Потом Я попробую поставить бету 2 если будет тоже самое, наверное придётся ждать релиза а в бету лезть не нужно.
У кого такая же проблема? Если как то исправили её напишите пожалуйста как?
I had put it yesterday and found a problem with sound.(if you watch the video with sound(of course) or listen to the muses through the Internet(browser(generally where used at least as a флеф-player sound some with gaps(not listen possible).... It's like in the flash to and on other browsers. Tried the
, Opera Next 12.00 1351, Maxthon 3 and even on Lunascape6 not in one of these browsers sound was not normal.
I guess I will wait for beta 2. Then I try to put the beta 2 if it is the same thing, probably have to wait for the release and beta climb is not necessary.
Have anyone the same problem? If as you fix it please write how?
Жду ответа...
С уважением Владислав.
Waiting for reply...
With respect Vladislav.Hi! Have you but in beta 2 this problem has a little bit worse. Sound a little more intermittent. Is not it possible that all this is the end.... I Have to life sit on the final version
I hope You will fix this problem...
And by the way, no Matter what link or video or song, everywhere, the sound is not correct (damaged)!!!
Here's for example (even without a link) I set the flash beta 2 for Internet Explorer and open the song in Windows Media Player and the sound of the damaged (it does not matter where and how and through the video or the song sound all the same will be damaged).
I don't think that the flash will be such problems...
And in the flush as I understand are the codecs?(for playback of music, video, pictures and other things???)
If Yes. It seems to me that some codec or is not compatible with some or did he not correct (or is damaged (but then it would be an idea to do a video or music is not played b?))
I hope... good Luck to You and let You mistake find and fix.
Here, just in case throw a link where the sound is damaged.(I have already introduced the correspondence and throw this link but throw again):
http://www.youtube.com/watch?v=2Retqf5Drsg
Waiting for reply...
With respect Vladislav. =)
Привет! У вы но в бете 2 эта проблема еще на немного хуже. Звук еще немного сильней прерывистый. Не ужели это всё на этом и закончится.... Придётся всё жизнь сидеть на финальной версии
Надеюсь Вы исправите эту проблему...
И кстати, не Важно какая ссылка или видео или песня, везде звук не правильный(повреждённый)!!!
Вот Вам к примеру(даже без ссылки) ставлю Я флеш бету 2 для IE и открываю песню через Windows Media Player и звук повреждённый(не важно где и как и через что открывается видео или песня звук все одно будет повреждённый).
Я не думал что в флеше будут такие проблемы...
А в флеше Я так понимаю находятся кодеки?(для воспроизведения музыки,видео,картинок и прочего???)
Если да. То мне кажется что какой то кодек или не совместим с каким то или же он не правильный(или сам повреждён(но тогда бы по идее вообще видео или музыка не играли б?))
Надеюсь... Удачи Вам и пусть Вы ошибку найдёте и исправите.
Вот на всякий случай кидаю ссылку где звук повреждённый.(Я уже ввел переписку и кидал эту ссылку но кину еще раз):
http://www.youtube.com/watch?v=2Retqf5Drsg
Жду ответа...
С уважением Владислав. =) -
Problems with deleted Podcasts from iPod Touch (Проблема с удалением)
У меня проблема с удалением подкастов с моего iPod Touch (версия прошивки 2.2, iTunes 8.0.2.20)
Некоторое время назад я скачал через сам Ipod некоторые подкасты, в другое время с компа, после все синхронизировал и все уровнялось (переписалось недостающее туда и обратно). Сегодня я хотел все удалить и в настройках синхронизации моего iPod я просто снял галочку синхронизации и применил. После все плейлисты касательно подкастов были очищены, а вот сами файлы остались, т.к. в первую очередь суммируя то что у меня должно было быть и что было разница была в 3 гига.
С помощью SharePod решил проверить действительно ли так то что я думаю и оказалось что он увидел эти файлы, которые должны были быть удалены, но т.к. версия базы данных иная чем то что он может понимать программа, удалить я их не могу. Прошу помочь.
I have a problem with the removal of podcasts on my iPod Touch (firmware version 2.2, iTunes 8.0.2.20)
Some time ago, through the iPod Touch I downloaded some podcasts, at other times from the computer, after all synchronized (rewritten podcasts from my computer and ipod). Today I want to delete everything and in sync to my iPod settings, I took a tick synchronization and applied. After all the playlists from podcast has been cleared, but the files themselves remain as the free space was at 3 Gb fewer regulations.
Using SharePod checked their version and proved that SharePod saw no deleted files to be erased, but because version of the database other than the fact that he could understand the program, I can not remove them. Please help.You can only sync with one computer. I would backup to one computer and then restore from backup.
iOS: Back up and restore your iOS device with iCloud or iTunes -
There is a problem with the connection to CC
Hello, I have a problem with to connection to CC. I can't get ingress to apps. Apps tab shows me an error: "Failed to load. Adobe servers are unavailable.Check your Internet connection and firewall settings and try again." I've done all what was written, but it didn't help. I hope that you can help me.
Здравствуйте, у меня есть проблемы с подключением к СС. Я не могу получить доступ к приложениям. Во вкладке Apps показывает ошибку: "Сбой загрузки. Серверы Adobe не доступны. Проверьте ваше подключение к Интернету и настройки брандмауэра и повторите снова." Я сделал всё, о чём было написано, но это мне не помогло. Надеюсь, что вы сможете помочь мне.Please read, and reply back here with information https://forums.adobe.com/thread/1499014
-and try some steps such as changing browsers and turning off your firewall for downloads
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html -
Problems with graphics on MacBook Pro / Проблемы с графикой на MacBook Pro
After updating to 10.7.3 are having problems with graphics (screenshot attached).
Installing the Combo update did not solve the problem!
Updating to 10.7.4 did not solve the problem.
What should be done that would solve the problem?
/Russian
После обновления на 10.7.3 возникли проблемы с графикой (скриншот прилагается).
Установка Combo обновления проблему не решила.
Обновление до 10.7.4 проблему не решило.
Что необходимо сделать что бы решить проблему?Overheating happens when I use heavy graphics applications. At the moment, MBP cold, but the problem occurred. But if the application is rolled up and open again, the artifacts disappear. The problem occurs 3 ... 5 times a day, which is very annoying. In 10.7.2 before updating to 10.7.3 had no problems.
MBP 13" (mid 2010)
/russian
Перегрев бывает, когда я использую тяжелые графические приложения. В данный момент MBP холодный, но проблема произошла. Но если приложение свернуть и открыть снова, артефакты исчезают. Проблема возникает 3...5 раз в день, что сильно раздражает. В 10.7.2 до обновления до 10.7.3 проблем не было. -
I am trying to implement some kind of a server listening for requests. The listener part of the app, is a daemon thread that listens for connections and instantiates a handling daemon thread once it gets some. However, my problem is that i must be able to kill the listening thread at the user's will (say via a sto button). I have done this via the Sun's proposed way, by testing a boolean flag in the loop, which is set to false when i wish to kill the thread. The problem with this thing is the following...
Once the thread starts excecuting, it will test the flag, find it true and enter the loop. At some point it will LOCK on the server socket waiting for connection. Unless some client actually connects, it will keep on listening indefinatelly whithought ever bothering to check for the flag again (no matter how many times you set the damn thing to false).
My question is this: Is there any real, non-theoretical, applied way to stop thread in java safely?
Thank you in advance,
LeftyThis was one solution from the socket programming forum, have you tried this??
public Thread MyThread extends Thread{
boolean active = true;
public void run(){
ss.setSoTimeout(90);
while (active){
try{
serverSocket = ss.accept();
catch (SocketTimeoutException ste){
// do nothing
// interrupt thread
public void deactivate(){
active = false;
// you gotta sleep for a time longer than the
// accept() timeout to make sure that timeout is finished.
try{
sleep(91);
}catch (InterruptedException ie){
interrupt();
} -
Problem with Threads and a static variable
I have a problem with the code below. I am yet to make sure that I understand the problem. Correct me if I am wrong please.
Code functionality:
A timer calls SetState every second. It sets the state and sets boolean variable "changed" to true. Then notifies a main process thread to check if the state changed to send a message.
The problem as far I understand is:
Assume the timer Thread calls SetState twice before the main process Thread runs. As a result, "changed" is set to true twice. However, since the main process is blocked twice during the two calls to SetState, when it runs it would have the two SetState timer threads blocked on its synchronized body. It will pass the first one, send the message and set "changed" to false since it was true. Now, it will pass the second thread, but here is the problem, "changed" is already set to false. As a result, it won't send the message even though it is supposed to.
Would you please let me know if my understanding is correct? If so, what would you propose to resolve the problem? Should I call wait some other or should I notify in a different way?
Thanks,
B.D.
Code:
private static volatile boolean bChanged = false;
private static Thread objMainProcess;
protected static void Init(){
objMainProcess = new Thread() {
public void run() {
while( objMainProcess == Thread.currentThread() ) {
GetState();
objMainProcess.setDaemon( true );
objMainProcess.start();
public static void initStatusTimer(){
if(objTimer == null)
objTimer = new javax.swing.Timer( 1000, new java.awt.event.ActionListener(){
public void actionPerformed( java.awt.event.ActionEvent evt){
SetState();
private static void SetState(){
if( objMainProcess == null ) return;
synchronized( objMainProcess ) {
bChanged = true;
try{
objMainProcess.notify();
}catch( IllegalMonitorStateException e ) {}
private static boolean GetState() {
if( objMainProcess == null ) return false;
synchronized( objMainProcess ) {
if( bChanged) {
SendMessage();
bChanged = false;
return true;
try {
objMainProcess.wait();
}catch( InterruptedException e ) {}
return false;
}Thanks DrClap for your reply. Everything you said is right. It is not easy to make them alternate since SetState() could be called from different places where the state could be anything else but a status message. Like a GREETING message for example. It is a handshaking message but not a status message.
Again as you said, There is a reason I can't call sendMessage() inside setState().
The only way I was able to do it is by having a counter of the number of notifies that have been called. Every time notify() is called a counter is incremented. Now instead of just checking if "changed" flag is true, I also check if notify counter is greater than zero. If both true, I send the message. If "changed" flag is false, I check again if the notify counter is greater than zero, I send the message. This way it works, but it is kind of a patch than a good design fix. I am yet to find a good solution.
Thanks,
B.D. -
Problem with threads running javaw
Hi,
Having a problem with multi thread programming using client server sockets. The program works find when starting the the application in a console using java muti.java , but when using javaw multi.java the program doesnt die and have to kill it in the task manager. The program doesnt display any of my gui error messages either when the server disconnect the client. all works find in a console. any advice on this as I havent been able to understand why this is happening? any comment would be appreciated.
troy.troy,
Try and post a minimum code sample of your app which
does not work.
When using javaw, make sure you redirect the standard
error and standard output streams to file.
Graeme.Hi Graeme,
I dont understand what you mean by redirection to file? some of my code below.
The code works fine under a console, code is supposed to exit when the client (the other server )disconnects. the problem is that but the clientworker side of the code still works. which under console it doesnt.
public class Server{
ServerSocket aServerSocket;
Socket dianosticsSocket;
Socket nPortExpress;
ClientListener aClientListener;
LinkedList queue = new LinkedList();
int port = 0;
int clientPort = 0;
String clientName = null;
boolean serverAlive = true;
* Server constructor generates a server
* Socket and then starts a client threads.
* @param aPort socket port of local machine.
public Server(int aPort, String aClientName, int aClientPort){
port = aPort;
clientName = aClientName;
clientPort = aClientPort;
try{
// create a new thread
aServerSocket = new ServerSocket(port) ;
// connect to the nPortExpress
aClientListener = new ClientListener(InetAddress.getByName(clientName), clientPort, queue,this);
// aClientListener.setDaemon(true);
aClientListener.start();
// start a dianostic port
DiagnosticsServer aDiagnosticsServer = new DiagnosticsServer(port,queue,aClientListener);
// System.out.println("Server is running on port " + port + "...");
// System.out.println("Connect to nPort");
catch(Exception e)
// System.out.println("ERROR: Server port " + port + " not available");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Server port " + port + " not available", JOptionPane.ERROR_MESSAGE);
serverAlive = false;
System.exit(1);
while(serverAlive&&aClientListener.hostSocket.isConnected()){
try{
// connect the client
Socket aClient = aServerSocket.accept();
//System.out.println("open client connection");
//System.out.println("client local: "+ aClient.getLocalAddress().toString());
// System.out.println("client localport: "+ aClient.getLocalPort());
// System.out.println("client : "+ aClient.getInetAddress().toString());
// System.out.println("client port: "+ aClient.getLocalPort());
// make a new client thread
ClientWorker clientThread = new ClientWorker(aClient, queue, aClientListener, false);
// start thread
clientThread.start();
catch(Exception e)
//System.out.println("ERROR: Client connection failure");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Client connection failure", JOptionPane.ERROR_MESSAGE);
}// end while
} // end constructor Server
void serverExit(){
JOptionPane.showMessageDialog(null, "Server ","ERROR: nPort Failure", JOptionPane.ERROR_MESSAGE);
System.exit(1);
}// end class Server
*** connect to another server
public class ClientListener extends Thread{
InetAddress hostName;
int hostPort;
Socket hostSocket;
BufferedReader in;
PrintWriter out;
boolean loggedIn;
LinkedList queue; // reference to Server queue
Server serverRef; // reference to main server
* ClientListener connects to the host server.
* @param aHostName is the name of the host eg server name or IP address.
* @param aHostPort is a port number of the host.
* @param aLoginName is the users login name.
public ClientListener(InetAddress aHostName, int aHostPort,LinkedList aQueue,Server aServer) // reference to Server queue)
hostName = aHostName;
hostPort = aHostPort;
queue = aQueue;
serverRef = aServer;
// connect to the server
try{
hostSocket = new Socket(hostName, hostPort);
catch(IOException e){
//System.out.println("ERROR: Connection Host Failed");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Connection to nPort Failed", JOptionPane.ERROR_MESSAGE);
System.exit(0);
} // end constructor ClientListener
** multi client connection server
ClientWorker(Socket aSocket,LinkedList aQueue, ClientListener aClientListener, boolean diagnostics){
queue = aQueue;
addToQueue(this);
client = aSocket;
clientRef = aClientListener;
aDiagnostic = diagnostics;
} // end constructor ClientWorker
* run method is the main loop of the server program
* in change of handle new client connection as well
* as handle all messages and errors.
public void run(){
boolean alive = true;
String aSubString = "";
in = null;
out = null;
loginName = "";
loggedIn = false;
while (alive && client.isConnected()&& clientRef.hostSocket.isConnected()){
try{
in = new BufferedReader(new InputStreamReader(client.getInputStream()));
out = new PrintWriter(new OutputStreamWriter(client.getOutputStream()));
if(aDiagnostic){
out.println("WELCOME to diagnostics");
broadCastDia("Connect : diagnostics "+client.getInetAddress().toString());
out.flush();
else {
out.println("WELCOME to Troy's Server");
broadCastDia("Connect : client "+client.getInetAddress().toString());
out.flush();
String line;
while(((line = in.readLine())!= null)){
StringTokenizer aStringToken = new StringTokenizer(line, " ");
if(!aDiagnostic){
broadCastDia(line);
clientRef.sendMessage(line); // send mesage out to netExpress
out.println(line);
out.flush();
else{
if(line.equals("GETIPS"))
getIPs();
else{
clientRef.sendMessage(line); // send mesage out to netExpress
out.println(line);
out.flush();
} // end while
catch(Exception e){
// System.out.println("ERROR:Client Connection reset");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR:Client Connection reset", JOptionPane.ERROR_MESSAGE);
try{
if(aDiagnostic){
broadCastDia("Disconnect : diagnostics "+client.getInetAddress().toString());
out.flush();
else {
broadCastDia("Disconnect : client "+client.getInetAddress().toString());
out.flush();
// close the buffers and connection;
in.close();
out.close();
client.close();
// System.out.println("out");
// remove from list
removeThreadQueue(this);
alive = false;
catch(Exception e){
// System.out.println("ERROR: Client Connection reset failure");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Client Connection reset failure", JOptionPane.ERROR_MESSAGE);
}// end while
} // end method run
* method run - Generates io stream for communicating with the server and
* starts the client gui. Run also parses the input commands from the server.
public void run(){
boolean alive = true;
try{
// begin to life the gui
// aGuiClient = new ClientGui(hostName.getHostName(), hostPort, loginName, this);
// aGuiClient.show();
in = new BufferedReader(new InputStreamReader(hostSocket.getInputStream()));
out = new PrintWriter(new OutputStreamWriter(hostSocket.getOutputStream()));
while (alive && hostSocket.isConnected()){
String line;
while(((line = in.readLine())!= null)){
System.out.println(line);
broadCast(line);
} // end while
} // end while
catch(Exception e){
// System.out.println("ERRORa Connection to host reset");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Connection to nPort reset", JOptionPane.ERROR_MESSAGE);
try{
hostSocket.close();
}catch(Exception a){
JOptionPane.showMessageDialog(null, (a.toString()),"ERROR: Exception", JOptionPane.ERROR_MESSAGE);
alive = false;
System.exit(1);
} // end method run -
Problem with threads and camera.
Hi everybody!
I've a problem with taking snapshot.
I would like to display a loading screen after it take snapshot ( sometimes i
have to wait few seconds after i took snapshot. Propably photo is being taken in time where i have to wait).
I was trying to use threads but i didn't succeed.
I made this code:
display.setCurrent(perform);
new Thread(new Runnable(){
public void run() {
while((!performing.isShown()) && (backgroundCamera.isShown())){
Thread.yield();
notifyAll();
}).start();
new Thread(new Runnable(){
public void run() {
try {
this.wait();
} catch(Exception e) {
exceptionHandler(e);
photo = camera.snapshot();
display.setCurrent(displayPhoto);
}).start();This code is sometimes showing performing screen but sometimes no.
I don't know why. In my opinion performing.isShown() method isn't working correctly.
Does anyone have some idea how to use threads here?Hi,
I've finally managed to work this fine.
The code:
Object o = new Object();
display.setCurrent(perform);
new Thread(new Runnable(){
public void run() {
while(!performing.isShown()){
Thread.yield();
synchronized(o) {
o.notify();
}).start();
new Thread(new Runnable(){
public void run() {
try {
synchronized(o) {
o.wait(1);
} catch(Exception e) {
exceptionHandler(e);
photo = camera.snapshot();
display.setCurrent(displayPhoto);
}).start(); -
We have a problem where our application stops responding after a few days of usage. Things will for fine for a day or two, and then pretty quickly threads will start getting hung up, usually in places where they are allocating memory
We are running WebLogic 8.1 SP2 on Sun JDK 1.4.2_04 on Solaris 8 using the alternate threading model and the -server hotspot vm. We are running pretty much the same code that we had no problems with under WebLogic 6.1 SP4 and Sun JDK 1.3.1.
A thread dump usually shows that some or all of our execute threads are in the state "waiting for monitor entry" even though they are not currently waiting on any java locks. Here is a sample thread from the thread dump (we have ~120 threads so I don't want to post the full dump).
=============================================================================================
"ExecuteThread: '8' for queue: 'itgCrmWarExecutionQueue'" daemon prio=5 tid=0x005941d0 nid=0x2c waiting for monitor entry [c807f000..c807fc28]
at java.lang.String.substring(String.java:1446)
at java.lang.String.substring(String.java:1411)
at weblogic.servlet.internal.ServletRequestImpl.getRelativeUri(ServletRequestImpl.java:1872)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3492)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2585)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
=============================================================================================
String.java line 1446 for this jdk allocates a new String object, and all the other threads in this state also are creating new objects or arrays, etc.
We've done a pstack on this process when it's in this state, and the threads that are in the "waiting for monitor entry" that look like they're allocating memory are all waiting on the same lwp_mutex_lock with some allocation method that's calling into the native TwoGenerationCollectorPolicy.mem_allocate_work (see pstack output below for the same thread as in the thread dump above)
=============================================================================================
----------------- lwp# 44 / thread# 44 --------------------
ff31f364 lwp_mutex_lock (e3d70)
fee92384 __1cNObjectMonitorGenter26MpnGThread__v_ (5000, 525c, 5000, 50dc, 4800, 4af0) + 2d8
fee324d4 __1cSObjectSynchronizerKfast_enter6FnGHandle_pnJBasicLock_pnGThread__v_ (c807f65c, c807f7d4, 5941d0, 0, 35d654, fee328ec) + 68
fee32954 __1cQinstanceRefKlassZacquire_pending_list_lock6FpnJBasicLock__v_ (c807f7d4, ff170000, d4680000, 4491d4, fee1bc2c,
0) + 78
fee3167c __1cPVM_GC_OperationNdoit_prologue6M_i_ (c807f7bc, 4400, ff170000, 2d2b8, 4a6268, c807fa18) + 38
fee2e0b0 __1cIVMThreadHexecute6FpnMVM_Operation__v_ (c807f7bc, 963a8, 0, 0, 1, 0) + 90
fed2c2a4 __1cbCTwoGenerationCollectorPolicyRmem_allocate_work6MIii_pnIHeapWord__ (962c0, ff1c29ec, ff1c297c, ff131a26, 4800, 4998) + 160
fed22940 __1cNinstanceKlassRallocate_instance6MpnGThread__pnPinstanceOopDesc__ (ee009020, 5941d0, 15ca581, 3647f0, 4a6268, c807f8c8) + 180
fed34928 __1cLOptoRuntimeFnew_C6FpnMklassOopDesc_pnKJavaThread__v_ (ee009018, 5941d0, 0, 0, 0, 0) + 28
fa435a58 ???????? (ee009018, e86de, 15ca4de, 50dc, 5941d0, c807f9c8)
fb36f9a4 ???????? (0, d412ccd8, ee046c28, ff170000, 0, 0)
fad8b278 ???????? (ee046c28, d6000c90, ee046530, 8, db8e8450, c807f9e8)
fad62abc ???????? (d412ccd8, ee046530, d6000c90, ee3bfa38, 8, c807fa18)
fa4b3c38 ???????? (c807fb9c, 0, f2134700, fa415e50, 8, c807faa8)
fa40010c ???????? (c807fc28, c807fe90, a, ee9e1e20, 4, c807fb40)
fed5d48c __1cJJavaCallsLcall_helper6FpnJJavaValue_pnMmethodHandle_pnRJavaCallArguments_pnGThread__v_ (c807fe88, c807fcf0, c807fda8, 5941d0, 5941d0, c807fd00) + 27c
fee4b784 __1cJJavaCallsMcall_virtual6FpnJJavaValue_nLKlassHandle_nMsymbolHandle_4pnRJavaCallArguments_pnGThread__v_ (ff170000, 594778, c807fd9c, c807fd98, c807fda8, 5941d0) + 164
fee5e8dc __1cJJavaCallsMcall_virtual6FpnJJavaValue_nGHandle_nLKlassHandle_nMsymbolHandle_5pnGThread__v_ (c807fe88, c807fe84, c807fe7c, c807fe74, c807fe6c, 5941d0) + 6c
fee6fc74 __1cMthread_entry6FpnKJavaThread_pnGThread__v_ (5941d0, 5941d0, 838588, 594778, 306d10, fee69254) + 128
fee6927c __1cKJavaThreadDrun6M_v_ (5941d0, 2c, 40, 0, 40, 0) + 284
fee6575c _start (5941d0, fa1a1600, 0, 0, 0, 0) + 134
ff3758c0 lwpstart (0, 0, 0, 0, 0, 0)
=============================================================================================
Also when it's having this problem, the "VM Thread" is always using a lot of processor time. We did a couple of pstacks today while it was having this problem, and this thread was stuck in the ONMethodSweeper.sweep for over 15 minutes when we finally killed the server.
From the thread dump:
"VM Thread" prio=5 tid=0x000e2d20 nid=0x2 runnable
From the first pstack:
=============================================================================================
----------------- lwp# 2 / thread# 2 --------------------
fed40c04 __1cXvirtual_call_RelocationIparse_ic6FrpnICodeBlob_rpC5rppnHoopDesc_pi_nNRelocIterator__ (42a2f4, fa5fa46d, ffffffff, fc4ffcb8, 42a2f4, 42a324) + 124
fed46318 __1cKCompiledIC2t5B6MpnKRelocation__v_ (42a2f0, fc4ffd24, fc4ffd4c, e802, 0, 6) + 38
fed90c38 __1cHnmethodVcleanup_inline_caches6M_v_ (fa5f7f88, fa608940, 1, 0, fa400000, 6) + 1ac
fede18b4 __1cONMethodSweeperFsweep6F_v_ (2cf38, 0, ffffffff, ff1cf1fc, ff1c66e8, fede1d44) + 1b0
fede1e6c __1cUSafepointSynchronizeFbegin6F_v_ (2cf38, ff1ba138, 5000, 50dc, 5000, 525c) + 248
feef1fd4 __1cIVMThreadEloop6M_v_ (4400, 4000, 4324, 4000, 42b0, 3800) + 3d4
feef1ae4 __1cIVMThreadDrun6M_v_ (e2d20, 2, 40, 0, 40, 0) + 8c
fee6575c _start (e2d20, ff270200, 0, 0, 0, 0) + 134
ff3758c0 lwpstart (0, 0, 0, 0, 0, 0)
=============================================================================================
Second pstack
=============================================================================================
----------------- lwp# 2 / thread# 2 --------------------
fed41180 __1cXvirtual_call_RelocationIparse_ic6FrpnICodeBlob_rpC5rppnHoopDesc_pi_nNRelocIterator__ (0, ff1b9664, ffffffff, fc4ffcb8, a6f2cc, fc4ffbd0) + 6a0
fed46318 __1cKCompiledIC2t5B6MpnKRelocation__v_ (a6f2c8, fc4ffd24, fc4ffd4c, e802, 0, 6) + 38
fed90c38 __1cHnmethodVcleanup_inline_caches6M_v_ (faded4c8, fadf2c80, 1, 0, fa400000, 6) + 1ac
fede18b4 __1cONMethodSweeperFsweep6F_v_ (2cf38, 0, ffffffff, ff1cf1fc, ff1c66e8, fede1d44) + 1b0
fede1e6c __1cUSafepointSynchronizeFbegin6F_v_ (2cf38, ff1ba138, 5000, 50dc, 5000, 525c) + 248
feef1fd4 __1cIVMThreadEloop6M_v_ (4400, 4000, 4324, 4000, 42b0, 3800) + 3d4
feef1ae4 __1cIVMThreadDrun6M_v_ (e2d20, 2, 40, 0, 40, 0) + 8c
fee6575c _start (e2d20, ff270200, 0, 0, 0, 0) + 134
ff3758c0 lwpstart (0, 0, 0, 0, 0, 0)
=============================================================================================
Has anyone ever seen anything like this? I'm trying to figure out if this is caused by something we're doing, or something relating to our environment and jvm options. Any ideas?Thanks for the reply - I'm testing our app with the +UseConcMarkSweepGC now in our test environment to make sure it doesn't cause any problems there. Unfortunately the only place we've had this problem is on the production server, so it's extra difficult debugging this.
We're using the following memory options:
-ms512m -mx512m -XX:NewSize=128m -XX:PermSize=192m -XX:MaxNewSize=128m -XX:MaxPermSize=192m -XX:SurvivorRatio=8and the following debugging options, as we've also been seeing OutOfMemoryErrors ( see http://forum.java.sun.com/thread.jsp?forum=37&thread=522354&tstart=45&trange=15 )
-verbosegc -XX:+PrintGCDetails -XX:+PrintGCTimeStamps -XX:+PrintHeapAtGCBTW, which c++filt version and options are you using? Our Solaris boxes only seem to have the GNU version installed. I was trying to run that on some of the other stack traces and wasn't getting anywhere, and didn't know if because it was GNU version wouldn't work on something compiled with the Sun compiler.
Thanks!
--Andy -
Problem with threads and ProgressMonitor
Dear Friends:
I have a little problem with a thread and a ProgressMonitor. I have a long time process that runs in a thread (the thread is in an separate class). The thread has a ProgressMonitor that works fine and shows the tasks progress.
But I need deactivate the main class(the main class is the user interface) until the thread ends.
I use something like this:
LongTask myTask=new LongTask();
myTask.start();
myTask.join();
Now, the main class waits for the task to end, but the progress monitor don`t works fine: it shows only the dialog but not the progress bar.
What's wrong?Is the dialog a modal dialog? This can block other UI updates.
In general, you should make sure that it isn't modal, and that your workThread has a fairly low priority so that the UI can do its updating -
Problem with threads and/or memory
I'm developing an application where there are 3 threads. One of them sends a request to the other, and if the 2nd can't answer it, it sends it to the 3rd (similar to CPU -> CACHE -> MEMORY). When i run the program with 1000-10.000 requests, no problem occurs. When i run it with 300.000-1.000.000 requests, it sometimes hangs. Is this a problem with the garbage collector, or should it be related to the threads mecanism.
(note: eache thread is in execution using a finite state machine)i had been running the program inside Netbeans.
Running the jar using the command line outside
Netbeans i have no more problems... Does Netbeans use
it's own JVM?Depends how you set it up, but look under the options. There are settings for the compiler and jvm that it uses. -
Installation problem with NW'04 SR1: database connection failed
Hi all,
while installing NW '04 SR1 on Windows Server 2003 SP1 and MS SQL Server 2000 SP4 I ran into an error related to the database connection. While performing the step "Load Java Database content" SAPinst crashes with the message
com.sap.sql.log.OpenSQLException: Could not load class com.ddtek.jdbc.sqlserver.SQLServerDriver.
The connection to the SLQ Server with e.g. the Query Analyzer is OK. I had a problem with this installation setup before (have a look at the corresponding <a href="https://forums.sdn.sap.com/thread.jspa?threadID=338638&tstart=0">thread</a> ), the JDBC drivers where missing on the installation master but after copying them in the right direction the installation went on with no problem up to this point...
Has anybody an idea what could have happened here? Is this maybe a problem connected to the one I recently had
Below I attached the sapinst.log and jload.log with more detailed messages.
sapinst.log ###########
INFO 2007-03-12 22:06:24
Working directory changed to C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_~1\ONE_HOST.
INFO 2007-03-12 22:06:24
Output of D:\Java/bin/java.exe '-classpath' './sharedlib/antlr.jar;./sharedlib/exception.jar;./sharedlib/jddi.jar;./sharedlib/jload.jar;./sharedlib/logging.jar;./sharedlib/offlineconfiguration.jar;./sharedlib/opensqlsta.jar;./sharedlib/tc_sec_secstorefs.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\base.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\util.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\sqlserver.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\spy.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jce_export.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jsse.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_smime.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_ssl.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/w3c_http.jar' '-showversion' '-Xmx512m' 'com.sap.inst.jload.Jload' '-sec' 'WPT,jdbc/pool/WPT,D:\usr\sap\WPT\SYS\global/security/data/SecStore.properties,D:\usr\sap\WPT\SYS\global/security/data/SecStore.key' '-dataDir' 'S:/D51030724\J2EE_OSINDEP\J2EE-ENG/JDMP' '-job' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/IMPORT.XML' '-log' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log' is written to the logfile C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_~1\ONE_HOST/jload.java.log.
WARNING 2007-03-12 22:06:26
Execution of the command "D:\Java/bin/java.exe '-classpath' './sharedlib/antlr.jar;./sharedlib/exception.jar;./sharedlib/jddi.jar;./sharedlib/jload.jar;./sharedlib/logging.jar;./sharedlib/offlineconfiguration.jar;./sharedlib/opensqlsta.jar;./sharedlib/tc_sec_secstorefs.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\base.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\util.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\sqlserver.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\spy.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jce_export.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jsse.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_smime.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_ssl.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/w3c_http.jar' '-showversion' '-Xmx512m' 'com.sap.inst.jload.Jload' '-sec' 'WPT,jdbc/pool/WPT,D:\usr\sap\WPT\SYS\global/security/data/SecStore.properties,D:\usr\sap\WPT\SYS\global/security/data/SecStore.key' '-dataDir' 'S:/D51030724\J2EE_OSINDEP\J2EE-ENG/JDMP' '-job' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/IMPORT.XML' '-log' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log'" finished with return code 1. Output:
java version "1.4.2_13"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_13-b06)
Java HotSpot(TM) Client VM (build 1.4.2_13-b06, mixed mode)
12.03.2007 22:06:25 com.sap.inst.jload.Jload main
INFO: Jload -sec WPT,jdbc/pool/WPT,D:\usr\sap\WPT\SYS\global/security/data/SecStore.properties,D:\usr\sap\WPT\SYS\global/security/data/SecStore.key -dataDir S:/D51030724\J2EE_OSINDEP\J2EE-ENG/JDMP -job C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/IMPORT.XML -log C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log
12.03.2007 22:06:26 com.sap.inst.jload.Jload main
SCHWERWIEGEND: couldn't connect to DB
com.sap.sql.log.OpenSQLException: Could not load class com.ddtek.jdbc.sqlserver.SQLServerDriver.
ERROR 2007-03-12 22:06:26
CJS-20065 Execution of JLoad tool 'D:\Java/bin/java.exe '-classpath' './sharedlib/antlr.jar;./sharedlib/exception.jar;./sharedlib/jddi.jar;./sharedlib/jload.jar;./sharedlib/logging.jar;./sharedlib/offlineconfiguration.jar;./sharedlib/opensqlsta.jar;./sharedlib/tc_sec_secstorefs.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\base.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\util.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\sqlserver.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\spy.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jce_export.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jsse.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_smime.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_ssl.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/w3c_http.jar' '-showversion' '-Xmx512m' 'com.sap.inst.jload.Jload' '-sec' 'WPT,jdbc/pool/WPT,D:\usr\sap\WPT\SYS\global/security/data/SecStore.properties,D:\usr\sap\WPT\SYS\global/security/data/SecStore.key' '-dataDir' 'S:/D51030724\J2EE_OSINDEP\J2EE-ENG/JDMP' '-job' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/IMPORT.XML' '-log' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log'' aborts with returncode 1. Check 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log' and 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.java.log' for more information.
jload.log ###########
12.03.07 22:06 com.sap.inst.jload.Jload main
INFO: Jload -sec WPT,jdbc/pool/WPT,D:\usr\sap\WPT\SYS\global/security/data/SecStore.properties,D:\usr\sap\WPT\SYS\global/security/data/SecStore.key -dataDir S:/D51030724\J2EE_OSINDEP\J2EE-ENG/JDMP -job C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/IMPORT.XML -log C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log
12.03.07 22:06 com.sap.inst.jload.Jload main
SEVERE: couldn't connect to DB
com.sap.sql.log.OpenSQLException: Could not load class com.ddtek.jdbc.sqlserver.SQLServerDriver.
Best regards,
BerndHello Kairat,
Please follow the below mentioned guide to install it.
Check all the parameters to set and run pre requisite checker before starting installation.
Keep in mind that before starting any SAP installation you should always run prerequisite checker.
https://websmp205.sap-ag.de/instguides --> SAP Netweaver -->SAP Netweaver 7.0 -- > Installations --> EHP2
Regards,
Amit Barnawal -
My app store wont let me download apps, asks me to update my payment details then says theres a problem with previous purchase and card is expired which is untrue someone help me pls
This is a User to User Forum...
See Here for
Mac Apps Store Customer Service
http://www.apple.com/support/mac/app-store/contact.html?form=account
iTunes Customer Service Contact
http://www.apple.com/support/itunes/contact.html -
Problem with item and/or data during page-processing-PS/SQL
Greetings!
On my page I have a custom report (from 2 tables) and a small form-field, that adds and edits data in the report. After generating the form with the wizard I added an extra item, to store the id from one of the tables from the report data.
Now, on submit a calculation should take place, that updates data according user input with a procedure in Page-Prosseses:
declare a number;
begin
case :PLATZ
when 1 then a:=100;
when 2 then a:= 50;
else a:=25;
end case;
update TBL_MITGLIEDER set TURNIERPUNKTE = TURNIERPUNKTE + a
where ID_MITGL = :P14_ID_MITGL;
end;
:PLATZ is user selected (1,2,3), :P14_ID_MITGL stores the reference to TBL_MITGLIEDER (and shows the change, when I select another record)
As I understand, that process should also run, when I submit a chance, but nothing happens then.
But when I try to save a new record (which worked without any problems before adding that process), I get this error message:
ORA-06550: line 1, column 64: PL/SQL: ORA-00957: duplicate column name ORA-06550: line 1, column 7: PL/SQL: SQL Statement ignored
Error Unable to process row of table TBL_TURNIERSIEGER.
Then, when I go back into the app-builder and try to run the page again, I get this message:
ORA-01403: no data found
Error Unable to fetch row.
I am not sure, if you guys have all the information you need, to know whats going on. Maybe this has to do with session-id and the whay, items are updated. I hope you can help me.
Thanks, best regards,
tobiFirst can you please post all log file errors
>> I can't really give you a solution or specific recommendation since I did not saw this error yet myself, but on your own risk you can try:
1. You may try to just register 'dts.dll' using regsvr32.exe, but this error may indicate a bigger problem with setup.
If you are running SQL Server 64bit then try running this at the command prompt: %windir%\syswow64\regsvr32 "%ProgramFiles(x86)%\Microsoft SQL Server\90\dts\binn\dts.dll"
2. You can try reinstall from start (In this case you have to make sure that you un-install all)
[Personal Site] [Blog] [Facebook]
Maybe you are looking for
-
Adobe has abandoned us. Who will help us about compilation problems with Flash Builder for mobile?
Which is the correct forum???
-
Is there anyway to get ical to set the default alarm setting to 1 hour everytime I create a new event? Currently 15 minutes is the choice every single time.
-
Opened a .ai file, found that left and right side are cut off (landscape vs. regular the issue?)
Information all in the title. I open a .ai file and the left and right sides of the image are cut-off based on the "page" box
-
Can you turn the screen totally upside down on iPhone?
I would really like to be able to totally turn my iPhones screen upside down so that the home button is on the top and I can use it as normal or even lock it in that position. Is this feature already available? If so, how can I activate it. If not, t
-
Finesse silent monitoring question
I have below servers and client already setup: - Call Manager 10 - Cisco Unified Call Center Express - Cisco Finesse Client for Agent - Cisco Finesse Client for Supervisor I don't know how to setup silent monitoring to Agent by Supervisor, through BI