VZ access manager is already running in another user's session

Help! My parents currently use an USB Modem - I think the 551 L - for their internet access. They have been receiving the following message:
VZ access manager is already running in another user's session
They do not have a wireless router installed.
Help please!

VZAccess can only connect one user/session at a time. Either your parents did not properly shutdown VZA the last time they used it or the USB Modem is not hanging up its previous connection.
The easiest thing to do would be to reinstall VZA on that computer and see if the problem goes away. Ask your parents to disconnect the Modem before logging off or shutting down the computer to reduce the chance of the problem coming back.

Similar Messages

Protection Error - This application cannot continue because another application with an identical serial number is already running on another computer on your network

I attempted to open Final Cut Express this morning and got the message, "Protection Error - This application cannot continue because another application with an identical serial number is already running on another computer on your network".
I have no other FCE on any computers...this is the only mac running (iMac 2008 model). I used a preference manager app and deleted preferences...didn't work. I uninstalled and reinstalled FCE...didn't work.
This is the first time I have used FCE since installing the Yosemite OS, so I'm thinking perhaps that has something to do with it.
Any ideas?

There have been recent posts appearing about your problem. I'm not sure if anyone has found a solution.
FCE was abandoned by Apple years ago, and they are currently making Operating Systems without regard to how it impacts FCE.
countrynewsman wrote:
I uninstalled and reinstalled FCE...didn't work.
That is what I would try - a fresh install - but your need to use FCS remover (from the same software source as Preference Manager) to make sure you get all traces of your existing installation off the drive prior to doing the installation:
http://www.digitalrebellion.com/fcsremover/
If you use FCS Remover, and reinstall the other problem may be that Apple has apparently removed the Software Upgrade to FCE 4.0.3.
So unless you have a 4.0.3 install disk, or you hadn't upgraded past the version number of the install disk you do have, you legacy projects may be tagged as being created with a later version than you have and not open.
Hope it works out for you.
MtD

Problem updating cs6 "application manager is already running..." ?

Hi everybody
When im trying to update CS6 the application manager app don doit and give this message: "adobe application manager is already running, please close other instances before applying updates."
There is not other instances of the application manager running? how could this error be fixed?
thanks for your help

Yes, of course, I have checked and there is only one instance of the Adobe Application Manager.
The 2 updates are:
Photoshop 13.1.2 for Creative Cloud
Adobe Bridge CS6 5.0.2 Update
This problem originally started before Christmas with the Photoshop update. When the Bridge update became available this month, it also had the same issue.
Up until the Photoshop update problem, other updates worked fine.

Logic already running on another computer on your network, won't open.

I'm trying to open Logic Pro on MacBook Pro and I get this: This application cannot continue because another application with an identical serial number is already running on another computer on your network.
I do have Logic installed on my iMac also but it's not running. Oddly, Logic will open on the iMac w/o the problem. anone got the answer? Thanks!

Hi
I've had this when a Memory Server (Kontakt?) was still running even after quitting Logic.
HTH
CCT

This file is already open by another user or another application-

I am using InDesign CS4 on Mac OS 10.6.4, and sporadically get an error message reading "This file is already open by another user or another application. This file may be stored on a network server and cannot be opened until the other user closes it." This happens when I try to open a saved .indd file. The files are all on my hard drive, I created them, and nobody else has access to them.
So far I've lost a handful of files' worth of work, as I cannot open the file in InDesign as an original or a copy, nor can I copy the file in the Finder (I get "unknown error: -22"), nor can I copy or move it using Terminal, nor can I zip it up. Time Machine doesn't recognize the file, and Apple Support couldn't help.
I tried calling Adobe Support, but after telling me it was $40 for the answer the phone tech sent me back to the website instead of letting me pay!
How do I fix this? I am losing hours of client work every time this happens, and only if I have a pdf version of the file can I recreate the work.
Many thanks in advance.

The last time it happened I restarted, cleared both the PRAM and NVRAM, and ran both Disk Utility and Disk Warrior. Nothing fixed it. I changed the permissions a number of times and that did not fix it.
It's important to note that it doesn't happen to every file I save from InDesign; if it did I would have re-installed CS3 and dealt with that, because this issue never happened before I upgraded. So there's also no way to know if a possible fix is working or not.
Also, there were no placed images or other artwork in the file this happened to most recently.
I've checked my FontCase prefs, and if it's not running it's disabled, so that's out. I have some fonts that had been converted from Windows PostScript to TrueType, so I've disabled those.
As I mentioned in the original post, I am not on a network beyond my home network, which consists of two computers and two routers. The file is on my computer's hard drive, and I am the only person accessing it. While I do use Dropbox, this file is not in that directory.

We are sorry, but we are unable to complete your request.•The Office 2007 Product Key provided is already associated with another user on this site. Please log in with the user information originally used with this Office 2007 Product Key.

Over the years I have had many ISP and email addresses - but now we have finally gone almost fully virtual...
I have a live login and MS ID 4 my SkyDrive account but I only use my MS touch with 8.1, SkyDrive and office 365 for mobility.
And I still like to backup to my own server!!!
What would be good is if I can put all the software licenses and product keys of the software and keep a record of my mac addresses for hardware and even static IP's in a file or a secure location within the MS online store.
That's where MS wants me to get my computing needs from in future and I will always be able to retrieve it in future but what about the $$$$$ I have spent on software, hardware and applications prior to now???
I know u guys love 2 collect data 4 marketing analysis,
4 example I have an old PC that is still running a server from last century - if you knew about it a simple script would allow you to offer upgrades or at least relevant MS products - UNLIKE the rubbish adds I just turn off or tune out
now...
Why cant I add products previous online email purchases into the 1 MS live ID account where I can keep it together? If you make that available I don't have to have separate steam accounts, EA game accounts, ASUS and adobe accounts etc
etc.
What has brought me 2 this is I was looking for my office pro 2007 disks to rebuild a HOME USE ONLY windows 7 laptop (NO touch screen so 8.1 is no benefit at all)
I HAVE 4 Genuine PRODUCT KEYs for Office 2007 BUT EVERY TIME I WENT TO DOWNLOAD the software - regardless of the key I used - I got the error message: We are sorry, but we are unable to complete your request.•The Office 2007 Product Key
provided is already associated with another user on this site. Please log in with the user information originally used with this Office 2007 Product Key.
That's crap - This is a clean brand spanker install of Win7 and there was nothing b4 I put the oem drivers from Toshiba back on.
I looked at dozens of support pages and forum blogs and tried for hours to get a copy to download - including incognito and other logins but because my default PC name is also my MS Windows live ID the same error was repeated.
I keep away from the non MS sites for these things and with good reason - there were heaps of similar users with the same issue or very close to it that had downloaded from a supposed MS copy from eValue or digital river etc and the next
thing was total corruption of the OS.
EVENTUALLY I found a LIVE MS chat on a support site in the US and she gave me a link to a slightly older version which will need updating and some reg edit changes but so far, so good.
The point is - what a crock !
I should be able to just keep all my software, drivers, updates, service packs, and versions that I have upgraded in the MS store.
If Microsoft aren't going to support XP or Office 2003 and eventually 2007, vista & Windows7 not far behind??? then that's still no excuse for them to put these restrictions and limits when I OWN my copy of the software!!
Unlike office 365 and SkyDrive space which is described in the T&C (that we all read before ticking that radial button to agree of course) as ONLY under a leased licence.
IF Microsoft can support AND develop software that supports SQL2000 Servers, why is it so hard to archive and keep the same info for everyone???

Over the years I have had many ISP and email addresses - but now we have finally gone almost fully virtual...
I have a live login and MS ID 4 my SkyDrive account but I only use my MS touch with 8.1, SkyDrive and office 365 for mobility.
And I still like to backup to my own server!!!
What would be good is if I can put all the software licenses and product keys of the software and keep a record of my mac addresses for hardware and even static IP's in a file or a secure location within the MS online store.
That's where MS wants me to get my computing needs from in future and I will always be able to retrieve it in future but what about the $$$$$ I have spent on software, hardware and applications prior to now???
I know u guys love 2 collect data 4 marketing analysis,
4 example I have an old PC that is still running a server from last century - if you knew about it a simple script would allow you to offer upgrades or at least relevant MS products - UNLIKE the rubbish adds I just turn off or tune out
now...
Why cant I add products previous online email purchases into the 1 MS live ID account where I can keep it together? If you make that available I don't have to have separate steam accounts, EA game accounts, ASUS and adobe accounts etc
etc.
What has brought me 2 this is I was looking for my office pro 2007 disks to rebuild a HOME USE ONLY windows 7 laptop (NO touch screen so 8.1 is no benefit at all)
I HAVE 4 Genuine PRODUCT KEYs for Office 2007 BUT EVERY TIME I WENT TO DOWNLOAD the software - regardless of the key I used - I got the error message: We are sorry, but we are unable to complete your request.•The Office 2007 Product Key
provided is already associated with another user on this site. Please log in with the user information originally used with this Office 2007 Product Key.
That's crap - This is a clean brand spanker install of Win7 and there was nothing b4 I put the oem drivers from Toshiba back on.
I looked at dozens of support pages and forum blogs and tried for hours to get a copy to download - including incognito and other logins but because my default PC name is also my MS Windows live ID the same error was repeated.
I keep away from the non MS sites for these things and with good reason - there were heaps of similar users with the same issue or very close to it that had downloaded from a supposed MS copy from eValue or digital river etc and the next
thing was total corruption of the OS.
EVENTUALLY I found a LIVE MS chat on a support site in the US and she gave me a link to a slightly older version which will need updating and some reg edit changes but so far, so good.
The point is - what a crock !
I should be able to just keep all my software, drivers, updates, service packs, and versions that I have upgraded in the MS store.
If Microsoft aren't going to support XP or Office 2003 and eventually 2007, vista & Windows7 not far behind??? then that's still no excuse for them to put these restrictions and limits when I OWN my copy of the software!!
Unlike office 365 and SkyDrive space which is described in the T&C (that we all read before ticking that radial button to agree of course) as ONLY under a leased licence.
IF Microsoft can support AND develop software that supports SQL2000 Servers, why is it so hard to archive and keep the same info for everyone???

I have downloaded e-books from Leserskring on my computer. I would like to download it to my Samsung Tablet as well. It says I cannot as it was already installed by another user. I contact Leserskring and they said I installed it on my computer without cr

I have downloaded e-books from Leserskring on my computer. I would like to download it to my Samsung Tablet as well. It says I cannot as it was already installed by another user. I contact Leserskring and they said I installed it on my computer without creating an Adobe ID and cannot change the "authorization information" on my Adobe Digital Editions. If I do it now on my computer, after installing my books, I will loose all my books. Is this true or how can I correct it.

I have downloaded e-books from Leserskring on my computer. I would like to download it to my Samsung Tablet as well. It says I cannot as it was already installed by another user. I contact Leserskring and they said I installed it on my computer without creating an Adobe ID and cannot change the "authorization information" on my Adobe Digital Editions. If I do it now on my computer, after installing my books, I will loose all my books. Is this true or how can I correct it.

"This content is already fufilled by another user"/Getting an ebook from Play Books to Aldiko?

I bought the book from the play store. I downloaded the .epub/acsm file from the website onto my phone's sd card.
I tried to open it and import to aldiko but i get error messages all the time.
I contacted someone from Google , and they directed me here.
Please help?

WHOOP WHOOP! Thanks for reminding me about Digital Editions for the ebook. I got it finally working on my phone - even though someone from Google said I couldn't do it..
Date: Fri, 18 May 2012 05:12:46 -0600
From: [email protected]
To: [email protected]
Subject: "This content is already fufilled by another user"/Getting an ebook from Play Books to Aldiko?
    Re: "This content is already fufilled by another user"/Getting an ebook from Play Books to Aldiko?
    created by Frustrated in AZ in Adobe Digital Editions - View the full discussion
If you downloaded the file without using Digital Editions to do it, there'snot much we can help you with because that's the product we deal with. =======================
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4418873#4418873
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4418873#4418873. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Digital Editions by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Problem downloaden ebooks. i get the message: 'Elic already fullfilled by another user' ( i had to authorize adobe digital editions on my comp to be able to share a certain book, but now doesnt download books anymore from shop) How can i solve this?

Problem downloaden ebooks. i get the message: 'Elic already fullfilled by another user' ( i had to authorize adobe digital editions on my comp to be able to share a certain book, but now doesnt download books anymore from shop) How can i solve this?

You has a other Adobe ID in Adobe Digital Edition by the First open of the eBook....or you have open the eBook with empty authorization. When has used a other adobe id should change the adobe id, if not the eBook are looked with the empty authorization. In this case need a new Download of the eBook of his reseller.

The e-license already fulfilled by another user

I bought some books using a PC but I didn’t downloaded them right away: few days later I lost the PC: it was out of order! I’m working now with a notebook by which I’m able to buy and download other books but not the older ones. I can’t download them because ADE advise that "the e-license already fulfilled by another user". I asked twice the library to reset the license but without success. What can I do? Grateful for any suggestion.

Adobe online support directed me to this link http://forums.adobe.com/thread/314992 LOOK familiar ?????
Then they said open a support ticket
Karal : 1. Sign into the Customer Support Portal at www.adobe.com/go/supportportal
Karal : 2. Type in your Adobe ID and Password and then click Sign in
Karal : 3. Under Get Support, click Technical Support tab and choose the product.
Karal : 4. Click "Continue" button and proceed to online form.
Karal : 5. Fill in the required fields (asterisk), and click Review Case and Submit.
Karal : Our tech support specialist will follow up with you through the same case. Please make a note of the Web Case number.
Come ON... for a company that has $1.32 BILLION in operating cash flow.. you would think they can create a product that actually works.. or hire people who can actually support ?

Extension is already assigned to another user on a dial plan.

I am unable to UM enable a user with a specific extension. I get the error that the extension is already assinged to another user. I cannot locate the number in the directory.
I have exported with Get-UMMailbox.. the extension is not in the export.
ldap query for msRTCSIP-Line gives no results.
ldap query for Telephone Number no results.
Lync ctrl panel search does not return any results.
Any advice is appreciated.
l1b3r4l

I figured out my issue. This may be similar for others.
Scenario: I attempted to UM enable a Lync user that I assigned an "available" number. When I UM enabled I was presented with an error stating that the extension was already assigned to a user in the dial plan.
I did custom ldap searches for msRTCSIP-Line=tel:+1xxxxxx1234 - No results with this search.
I searched via the Lync ctrl panel filters for this number. - No results returned.
I attempted the proxyaddress=smtp: search via custom ldap search in ADUC. - No results.
What happened was a user was assigned Enterprise voice andded to a dial plan, then was moved over to the Aura system. WHen this happened the number was given back to the pool, the user was set as PC>PC only. This user did not have UM disabled
when removed from Lync Enterprise voice.
I was able to locate the user using the following commmands. I found the user disabled UM, then was able to provision the new user without issue.
The command to do so is as follolws: (plus bonus commands for your enjoyment)
get-ummailbox | ForEach { If($_.Extensions -eq 4322){$.DisplayName}}
get-ummailbox | where { $_.Extensions -eq "45873" }
Get-UMDialplan -Identity "DefaultDialPlan" | Format-List
Hope this helps someone!
Enjoy
l1b3r4l

Alert if document is already open by another user on server

Hi
First off, I know working off servers isn't the best practice because who knows if someone else is making changes to the very file you're supposed to be working on. However, we work directly from our server and the biggest concern is two users both opening and saving changes without being aware they're overwriting another persons work.
Is it possible to run a script upon file open to:
1. check the metadata of the file
2. alert the current user if this is open by someone else, and if this isn't true then to update the metadata to say which user has it open.
File close:
1. remove user information from metadata, so next user opening will not be falsely alerted
A while ago I had some joy with step 1, however step 2 required another save of the file otherwise it's metadata wasn't being picked up by the next user. This in turn meant longer working times because the file would open, then save instantly if it didn't find another users name in the metadata.
Is writing to a log file on the server a better solution which does not require the psd/tiff/eps to be resaved once the curent users info is stored in it?
If this is a better idea is there a way to write into this log, that should Photoshop crash and the regular close script that cleared the log didnt work so to now clear it upon process termination?
Simply put, I want an alert to popup when a file is open by someone else. where this queries the files status or looks at tags placed in the file when i use?
Thanks,
Tom
EDIT: FYI i was using IPTC data store the in use or not in use tags with if clauses containg either alert or save methods.
Message was edited by: thomas.f.elton

Photoshop is not a file editor. I would think that it would simply read in an image file decode and create a document to work on. Most likely it would the close the file for it has no keep to keep it around. Thefore if it had a lock on the file it would be released.
Adobe may have way to work in groups which will enable users to check out and check images back into a shared development project. I have never looked into that do a search. The is also a Adobe Drive preference which I do not check which may be part of sharing

Cant open same excel file when it is already open by another user (cant open read only)

We have been having an issue for a while now where if a user has an network saved
excel document open, another user cannot open it at all. We get the error
"Sorry we couldn't find your file. Is it possible it was moved, renamed or deleted?"
and/or simple "Could not Open _____" errors when this happens. We should certainly be able to open a read only copy at the least but office doesn't even give an option to do so. We are using office '07 Pro Plus. Thanks.

We have been having an issue for a while now where if a user has an network saved
excel document open, another user cannot open it at all. We get the error
"Sorry we couldn't find your file. Is it possible it was moved, renamed or deleted?"
and/or simple "Could not Open _____" errors when this happens. We should certainly be able to open a read only copy at the least but office doesn't even give an option to do so. We are using office '07 Pro Plus. Thanks.
I'm facing the same issue. Started only when my machine was upgraded from XP Pro to Win 7 Ent. Office 2010 is the version. Hoping someone as a answer.
Thanks.

Tracking records change made by another user or session

How does oracle forms track records change made by other user or session?

I think the question is, how does Forms know to issue the error "FRM-40654: Record changed by another user. Re-query to see change".
I don't know exactly how Forms knows this. But in the past I have found that if a column has changed on the record, which you are not querying in this forms block, then you don't get the error. So Forms is perhaps comparing all the database values for the queried record, against the values that Forms has queried?
When you attempt to lock the record from Forms, you'll see that Forms issues a statement
SELECT <all the db columns in the block>
FROM <wherever>
FOR UPDATE OF <all the db columns in the block which are not query only>
Even so, in the database, that statement doesn't know what the values are that the Form has already queried. So Forms must be doing something else.
Hope this helps, it's a bit of a black box area I guess.

Access denied error while running opening remote power-shell session from one azure machine to another

We are trying to open a remote power-shell session from one azure machine to another azure machine and that is failing with the following error. Any ideas?
Observations: -
If the worker role is running under network service or local system, then it fails.
We emulated the same behavior from a stand-alone exe and that also failed when the exe was run under network service or local system.
If we run the same stand-alone exe from a user account, then it works.
Unhandled Exception: System.Management.Automation.Remoting.PSRemotingTransportException: Connecting to remote server sampleapprm.cloudapp.net failed with the following error message : Access is denied. For more information, see the about_Remote_Troubleshooting
Help topic.
   at System.Management.Automation.Runspaces.AsyncResult.EndInvoke()
   at System.Management.Automation.Runspaces.Internal.RunspacePoolInternal.EndOp
en(IAsyncResult asyncResult)
   at System.Management.Automation.Runspaces.Internal.RemoteRunspacePoolInternal
.Open()
   at System.Management.Automation.RemoteRunspace.Open()
   at ConsoleApplication2.Program.Main(String[] args)

Hi,
This error only show access is denied, and it is hard for me to deal with this issue, may be Windows Powershell forum or Windows Azure VM are good forums for you, could you give more details information to us for a better help if this issue
was related with windows Azure.
Best Regards
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

VZ access manager is already running in another user's session

Similar Messages

Maybe you are looking for