VZ iPhone 5 w iOS 6.x not receiving messages from ATT iPhone 5 w iOS 7

I have an ATT iPhone 5 with iOS 7.    My wife has VZ iPhone 5 with IOS 6.    She cannot recieve any text messages sent from my iPhone.   She does get messages sent from my iPad with iOS 7 and from my Macbook Air with 10.8.x
When i turned OFF iMessaging, I was able to send a text message to her via regular SMS.
Any ways to help??

I have an ATT iPhone 5 with iOS 7.    My wife has VZ iPhone 5 with IOS 6.    She cannot recieve any text messages sent from my iPhone.   She does get messages sent from my iPad with iOS 7 and from my Macbook Air with 10.8.x
When i turned OFF iMessaging, I was able to send a text message to her via regular SMS.
Any ways to help??

Similar Messages

  • IPhone 4 occasionally not receiving messages from one iPhone 4s

    My iPhone 4 Verizon 16 GB is occasionally not recieving messages from my friend's iPhone 4s Verizon 16GB occaisionally for no good reason that I can find.
         I have HEAVY experience with iOS and many iDevices, so I can say that I know my way around an iPhone a bit, thats why this is really confusing me, I have tried doing a full factory reset of my iPhone and that didnt help either.
         I don't pay for 3G since i use Page Plus Cellular, so when i leave WiFi it switches to text instead of iMessage, her iPhone is the only one that when she replies to my texts occaisionally I will not ever get them. it's getting very annoying once I haven't gotten a reply in a half hour to just send a text saying "resend" all the time... Any solutions would be greatly appreciated!

    HI Friend,
    Try to unsign and sign in again.
    For FaceTime and iMessage chosse to use your email address instead of your mobile number.
    Go to Settings>>Message>>Send&Receive and set your email address.
    If it is still not working, unsign your Apple ID and select your mobile number ("+" "country code" "mobile number").
    Turn off Show Subject in Settings>>Message
    Reset the Network Setting, which makes your phone to forget every networks and passwords that you connected your phone to.
    to reset the Network Settings just go to Settings - General - Reset (at the bottom) - Reset Network Settings.
    I remember when I reset the Network Settings, i turned off iMessages. I connected to my home Wi-Fi and surfed the web for a little while. Sent some regular SMS messages, and about 10min later, I turned on iMessages again and sent a text to a friend with an iPhone and it started working as iMessage! Baloons finally became blue.
    Go to www.apple.com or Settings>>iCloud then access your Apple ID. There you can edit your information, placing your phone number and tap OK. then go to iMessage settings and mark your phone number to receive iMessages.
    Also check in: Settings>>Message if you turned on iMessage before. Here, turn off "Show Subject Field".
    Change your address for your currently location. If not works, change it for your native country.
    Did you turn on iCloud as well?

  • TS2755 iPhone 5 on ios7 doesn't receive messages from other iPhones when data is turned off

    My iPhone 5 doesn't receive iMessages or texts from other iPhones when my data is turned off, obviously I do not expect to receive iMessages but I also cannot receive text messages. Text messages can be sent but not received. Text messaging to and from people with androids and blackberries is fine.

    That is because iPhone users would be sending you iMessages. The only time you would receive them as a text is if they have theirs turned off, or it is set to send an SMS if iMessage fails. At some point you had iMessages activated, and if so, that is how the iDevices will send to you.

  • Not receiving texts from some iphone users.. anybody know whats up with that?

    Just got Samsung S4 and I'm not receiving texts from some iPhone users.
    Do i have something set up wrong?

    It appears you have moved from an iPhone to an android phone. The problem you are having is because you did not deactivate your iMessage service before leaving.
    If you still have your iPhone, you can re-activate it and then
    turn on iMessage in the settings
    uncheck your email and phone number
    turn off iMessage
    Settings>Messages
    If you don't have your phone or don't want to go thru the hassle of reactivating it, you can simply call Apple at 800-694-7466 and ask them to turn off your iMessage.

  • TS4002 Hello, icloud receive messages from gilly hicks, but does not receive messages from another personal account... this is happening me since one week and i dont know how to solve this.... error in the mail delivery system says not valid IPv4 SMTP err

    Hello, icloud receive messages from gilly hicks, but does not receive messages from another personal account... this is happening me since one week and i dont know how to solve this.... error in the mail delivery system says not valid IPv4
    SMTP error from remote mail server after RCPT TO:<[email protected]>:
       host mx6.me.com.akadns.net [17.158.8.114]: 550 5.7.0 Blocked - see https://support.proofpoint.com/dnsbl-lookup.cgi?ip=184.173.9.56:
       [email protected]
    i do alse receive from gmail....
    please help... what is happening!!!!

    Just to recap, this is a collection of ports I have collected over time for people who needed this information when setting up the HP ePrint app so that they could view their email from within the app.  I am certain other applications also need this information.  Although lengthy, I could not find a more comprehensive place to retrieve this information.  Feel free to post additional information, faulty information, or other related topics below as this is simply a collection of data and it would be practically impossible to test all of them. Thank you!
    Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
    When a solution is found please mark the post that solves your issue.
    Every problem has a solution!

  • TS4268 I just traded in my iPhone for a Samsung and I am not recieving messages from other iPhone users. I think I need to remove my phone number from iMessaging but I am not sure how to.

    just traded in my iPhone for a Samsung and I am not recieving messages from other iPhone users. I think I need to remove my phone number from iMessaging but I am not sure how to.

    as http://support.apple.com/kb/ts5185 says to sign out and if not working to contact apple. you can contact apple by phone/chat. number U.S. iPhone technical support:
    (800) MY-IPHONE (800-694-7466)

  • TS2755 Why won't my iPhone receive messages from other iPhones, I can only receive them on my ipad?

    Ever since I updated to the ios7 soft wear my iPhone won let me receive messages from other iPhones, they will only show up on my ipad. Any ideas??

    I have the same problem. Did you Solveig yours?

  • Galaxy s5 not receiving messages from iphone users

    Ok so sorry about the long question but I just bought a galaxy s5 to replace my iphone 4s and im having trouble getting messages from iphone users.  I tried turning off imessage, turned off find my iphone, resetting the device completely, and even created a new apple id but nothing has worked in the past 6 hours. The only thing I have left is to contact apple support but I really dont want to spend $20 to talk to someone if I dont have to... Any help at this point will be apprectiated.  Thanks

    At the risk of repeating some information, I'm leaving a full message here because I found many of the suggestions above to be vague and confusing. This is a step by step of the call that I just put in to Apple to fix this issue with Samsung S5 Galaxies not getting text messages from iPhones. This process should only be necessary if you no longer have possession of your iPhone; if you do, it seems from messages above you can go into your iPhone's settings and turn off iMessage yourself.
    NOTE: According to Victoria, the Apple rep who was familiar with the problem and (supposedly, within the next half hour to 24 hours) fixed the problem, iPhone users who have updated to IOS 7.1.1 --not just 7.1, but the 7.1.1 specifically -- will not have this issue, as 7.1.1 fixed the issue causing this disconnect. However, any iPhone user operating under 7.1 or previous systems will not be able to send an S5 Galaxy user a text without an elaborate and individualized process to remove the former iPhone user's iMessage link. So, here's what I did:
    1. Called Apple Support at 800-694-7466 (I could not find the section headings/descriptions mentioned by FoxFifth above on the website listed; the sections did not match anything on the page linked to that supplied url)
    2. Followed the prompts, which involved giving my phone number (the one now linked to my Galaxy S5 but formerly to my iPhone 4s) and verbally requesting a representative at the appropriate time after the appropriate prompt. NOTE: disregard the warning about a $19 one-time service charge; it will not apply once you speak to someone.
    3. Wait for a rep.
    4. When the rep answers, say, "I just upgraded from my iPhone (4, 4s, 5, etc.) to a Samsung Galaxy S5 and can no longer receive texts from other iPhone users. I found online that this is because my iMessage is still turned on and I need you to deactivate my iMessage that automatically sends other iPhone users' messages to that old phone, which I no longer have."
    5. The rep, who -- if they are anything like Victoria, who said she's done this "quite a lot today, actually" -- will recognize your issue. The rep will send you a text message to your new device, which contains an alphanumeric code that you must read back to the rep to authenticate it. At that time, the rep will put in your iMessage deactivation request; it should (here's fingers crossed) become active within 24 (some users here say 48, so be patient) hours, at which time the problem should disappear.
    I hope this is detailed enough to help everyone else out there. Based on the Apple rep's familiarity with my problem, I'm hopeful the process will work as promised. I will update when I know for sure after a day or two that it is (or isn't) working.

  • Switched to Samsung GS5 2 months ago, still not receiving messages from iphone users

    I switched to a non iphone over two months ago and ever since then I cannot receive messages from iphone users sending in imessage format. They have to turn imessage on and off to be able to text me. This has been extremely inconvenient since I need to receive these messages for work in addition to my personal life. I have tried multiple suggestions I've read about, still nothing works. It's like this is apple's way of keeping customers using their iphone instead of switching for fear of not receiving messages. They won't really fix it either when we all know technology is advanced enough to fix this. HELP.

    Can’t get text messages from an iPhone - Apple Support

  • After updating to the ios7, I'm not receiving messages from phones other than iPhones or I'll get them really late. How can I fix this?!

    I receive messages from iPhones normally. But when I try to text people who have regular Android phones, I either get their messages really late or I don't get them at all. It makes talking to my friends extremely hard and I need help trying to fix it. At first, I thought it was the service of the college I just moved to until I realized my messaging worked fine here until I updated my phone to the iOS7. Somebody help me please! I have an iPhone 4S!

    Deactivate then reactivate iMessage on your phone.

  • TS5185 i traded in my iphone for a samsung s4 and not receiving messages from iphone users...

    i dont have the iphone anymore but they whiped it  at the store so that should be fine.. i went online to the apple section and deleted my iphone from the system and deleted my cell number my the imessage on my ipad and all my friends still cant send me messages from their iphones... it is still trying to send as an I message!! please help.

    The following may help: http://support.apple.com/kb/ts5185
    Note the last sentence:
    If you still cannot deactivate iMessage after you perform the steps above, or if you no longer have access to the iPhone, please contact Apple support for assistance.

  • HT4623 Since my update on my 5s I cannot receive messages from other iPhones. They all have to be sent by text. Why?

    Since my 7.1 update I do not receive messages unless they are sent as text.

    iOS: Troubleshooting Messages
    Symptoms
    Learn how to resolve issues with the Messages app on your iPhone, iPad, or iPod touch. You'll learn what you need to send messages using SMS, MMS, and iMessage as well as how to resolve issues with each method.
    Resolution
    Before you start troubleshooting, learn the difference between SMS, MMS, and iMessage. The first step to resolving an issue with iMessage is to update your iOS software and your carrier settings to the latest versions. If iMessage still has an issue, follow the steps below for your issue.
    If you can't activate iMessage with your phone number or Apple ID
    See how to troubleshoot iMessage activation. If you're using a China Telecom or au (KDDI) iPhone, you can activate iMessage only on your home network. While traveling internationally, you can't activate iMessage.
    If you can't send and receive iMessages
    You will need these to send and receive iMessages:
    An iPhone, iPad, or iPod touch
    iOS 5.0 or later
    A cellular data connection or a Wi-Fi connection
    A phone number or Apple ID registered with iMessage in Settings > Messages
    To resolve issues with sending and receiving iMessages, follow these steps
    Check iMessage system status for current service issues.
    Go to Settings > Messages > Send & Receive and make sure that you registered iMessage with your phone number or Apple ID and that you selected iMessage for use. If the phone number or Apple ID isn't available for use, troubleshoot iMessage registration.
    Open Safari and navigate to www.apple.com to verify data connectivity. If a data connection isn't available, troubleshoot cellular data or a Wi-Fi connection.
    iMessage over cellular data might not be available while you're on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn which network your phone supports. If your network doesn't support simultaneous data and voice calls, go to Settings > Wi-Fi and turn Wi-Fi on to use iMessage while you're on a call.
    Restart your device.
    Tap Settings > General > Reset > Reset Network Settings on your iPhone.
    If you still can't send or receive an iMessage, follow these steps
    Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
    Make sure that the contact you're trying to send a message to is registered with iMessage.
    If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
    If the issue occurs with a specific contact or contacts, delete and recreate the contact in the Contacts app. Create a new message to the newly created contact and try again.
    Back up and restore your device as new.
    If you aren't receiving iMessages across all iOS devices
    Go to Settings > Messages > Send & Receive on each iOS device and make sure that you signed in with your Apple ID. You must use the same Apple ID on each device.
    Go to Settings > Messages > Send & Receive > You Can Be Reached By iMessage At and make sure that you selected each phone number and email address you want to use with iMessage.
    If you linked a phone number to your Apple ID with iMessage and the phone number hasn't appeared, followthese steps.
    Sign out of your Apple ID in Settings > Messages > Send & Receive and Settings > FaceTime on all devices.
    If you're linking a phone number to an Apple ID, sign in to iMessage on your iPhone first. Then sign in to the rest of your device one by one with iMessage and FaceTime.
    If your iMessages didn't transmit as SMS when iMessage was unavailable for use
    Go to Settings > Messages > Send as SMS and turn on Send as SMS.
    Select your phone number when Sending iMessages in Settings > Messages > Send & Receive > Start New Conversations From.
    Make sure that you can send SMS with Settings > iMessage turned off.
    Source: http://support.apple.com/kb/ts2755

  • Not receiving messages from Skype on my ipad and iPod touch 5gen

    IPod touch 5 gen 32 gig black IOS 7.0.2
    Ipad 3rd gen, 32 gig white IOS 7.0.2
    I am not receiving messages on my ipad and iPod touch from Skype, it won't come thru,  I've tried reboot and hard reset, but nothing works, I reinstalled Skype, and nothing works.

    I had this same problem also.  The problem has to do with your credit card number associated with you iCloud account.  To solve this problem, you need to update your credit card/payment information by doing the following on your iPad / iPhone / iTouch:
         Settings > iCloud > click on your account > Payment Information
    Update this section with your correct credit card information and Save.

  • Flex client can SEND but not RECEIVE messages from BlazeDS

    Hi there,
    I built a sample chat application that should be able to send/receive messages from a JMS topic. However, I am only able to SEND messages, I am not able to receive them. Any advice/suggestions would be GREATLY appreciated as I am seriously stuck.
    My setup:
    - BlazeDS Turnkey
    - FioranoMQ JMS provider on remote machine
    What I know:
    - My MXML code is good. I am able to use the exact same code and get both subscribing and publishing working when I use 'ActiveMQ' instead of 'FioranoMQ' as my JMS provider
    - FioranoMQ JMS provider is working fine, my test Java clients can both subscribe and publish to the same JMS topic that the Flex app uses
    - Publishing from my Flex app is working because my Java client is able to receive messages from the same topic whenever Flex messages are sent to FioranoMQ
    - My Flex app is supposedly 'subscribed' to and 'connected' to the correct (streaming-amf) channel. I know this because the MXML 'Consumer' object's "subscribed" and "connected" properties are true and no fault events appear whenever I issue "consumer.subscribe()" in my Flex app.
    Sample debug console log:
    (I tried sending 8 JMS messages from my Java client code to the 'mytopic' topic that my Flex app is using. The end of the log shows that SOMETHING is happening after sending these messages, but notice the actual 'message' is never streamed even in the log!)
    [BlazeDS] 01/27/2009 FlexSession created with id '72D3E6EED1364AD328F342F1AF59FF
    69' for an Http-based client connection.
    [BlazeDS] 01/27/2009 Channel endpoint flextest-streaming-amf received request.
    [BlazeDS] 01/27/2009 Deserializing AMF/HTTP request
    Version: 3
    (Message #0 targetURI=null, responseURI=/1)
    (Array #0)
    [0] = (Typed Object #0 'flex.messaging.messages.CommandMessage')
    operation = 5
    correlationId = ""
    clientId = null
    timestamp = 0
    body = (Object #1)
    headers = (Object #2)
    DSMessagingVersion = 1
    DSId = "nil"
    timeToLive = 0
    destination = ""
    messageId = "AECE3D84-789C-29B7-3413-197C7A48A7D2"
    [BlazeDS] 01/27/2009 Serializing AMF/HTTP response
    Version: 3
    (Message #0 targetURI=/1/onResult, responseURI=)
    (Externalizable Object #0 'DSK')
    (Object #1)
    DSMessagingVersion = 1.0
    DSId = "ED38E721-2609-CF34-62A2-28D918C4BB8F"
    1.233083202182E12
    (Byte Array #2, Length 16)
    (Byte Array #3, Length 16)
    (Byte Array #4, Length 16)
    [BlazeDS] 01/27/2009 Channel endpoint flextest-streaming-amf received request.
    [BlazeDS] 01/27/2009 Endpoint with id 'flextest-streaming-amf' is streaming mess
    age: Flex Message (flex.messaging.messages.AcknowledgeMessage)
    clientId = null
    correlationId = open
    destination = null
    messageId = ED38E793-E519-95BB-3E4C-1A7E8D716951
    timestamp = 1233083202229
    timeToLive = 0
    body = ED38E793-E50A-2500-E2F5-7525401FD8CE
    [BlazeDS] 01/27/2009 Number of streaming clients for FlexSession with id '72D3E6
    EED1364AD328F342F1AF59FF69' is 1.
    [BlazeDS] 01/27/2009 Number of streaming clients for endpoint with id 'flextest-
    streaming-amf' is 1.
    [BlazeDS] 01/27/2009 Channel endpoint flextest-streaming-amf received request.
    [BlazeDS] 01/27/2009 Deserializing AMF/HTTP request
    Version: 3
    (Message #0 targetURI=null, responseURI=/2)
    (Array #0)
    [0] = (Typed Object #0 'flex.messaging.messages.CommandMessage')
    operation = 0
    correlationId = ""
    clientId = null
    timestamp = 0
    body = (Object #1)
    headers = (Object #2)
    DSEndpoint = "flextest-streaming-amf"
    DSId = "ED38E721-2609-CF34-62A2-28D918C4BB8F"
    timeToLive = 0
    destination = "flextest-message-destination"
    messageId = "5ED8AAA4-BDA8-C8E4-D85B-197C7AC5E83A"
    [BlazeDS] 01/27/2009 JMS consumer for JMS destination 'mytopic' is starting.
    [BlazeDS] 01/27/2009 JMS consumer for JMS destination 'mytopic' is

    Hi Alex, thanks for your advice. I tried reading the client-side logs, but it just physically shows what I was saying earlier - that the consumer is connected and subscribed, but no messages are coming through to it.
    I've attached the output of the 'flashlog.txt' file. For the particular session shown, the flex application was sent 8 JMS messages, but as you can see nothing got through. I put a 'trace' message in the message handler function (for my consumer object), but it never gets called.
    'E2513351-75DA-0837-7263-3807B91D9630' consumer set destination to 'flextest-message-destination'.
    '7D784A40-DBBB-71F1-4029-3807B91D45E3' producer set destination to 'flextest-message-destination'.
    'consumer' consumer subscribe.
    'flextest-streaming-amf' channel endpoint set to http://localhost:8400/FLEXTEST/msgbroker/streaming-amf
    'flextest-streaming-amf' channel settings are:
    'flextest-streaming-amf' pinging endpoint.
    'flextest-streaming-amf' channel is connected.
    'flextest-streaming-amf' channel sending message:
    (mx.messaging.messages::CommandMessage)
      body=(Object)#0
      clientId=(null)
      correlationId=""
      destination="flextest-message-destination"
      headers=(Object)#0
      messageId="8A592005-3C8A-4C6C-B074-380857710C00"
      operation="subscribe"
      timeToLive=0
      timestamp=0
    'consumer' consumer connected.
    'consumer' consumer acknowledge for subscribe. Client id '37CC5DED-A019-7110-3C89-A9926835103E' new timestamp 1233595684954
    'consumer' consumer acknowledge of '8A592005-3C8A-4C6C-B074-380857710C00'.
    Seems to me there can only be two explanations: either my BlazeDS configuration is incorrect (which is unlikely given that everything works if I use a ActiveMQ as my JMS provider with only trivial changes to my configuration), or there is some bug within BlazeDS that is preventing it from working properly with FioranoMQ. What do you think?

  • Changed from iPhone to Android, can't receive messages from other iPhones?

    Hi,
    I recently swapped an iPhone for an Android phone, however since then I can no longer receive messages from iPhones as they are sent as iMessages? Could anybody provide details of how to stop this?
    Thanks

    Fbaerisw wrote:
    I am currently having the same issue. Went from iphone 4 to Galaxy s3.  I changed user ID and Password online // turned off all imessages and icloud on I phone // also deregistered phone on itunes on computer // Verizon stated it would take 24 hours but nothing has yet updated // I went to the site to unregistered on apple support but the phone wasn't even listed on there. Is there anything else I should do? Should I just go back to my iphone at this point.. its been over a week. please help extremely frusterated .. thank you!
    Call Apple Support.  They have a procedure that can unregister your Apple ID from iMessage and the phone number, as long as you can still receive regular text messages at the phone number on a non-iPhone.

Maybe you are looking for

  • Creating an output  file using 'GUI_DOWNLOAD' function

    Hi SapAll. when i try to create an out put text file using the FM 'GUI_DOWNLOAD' by wiring the follwoing below source code CONCATENATE 'ASORT' c_tab 'ASORTYP' c_tab                 'VKORG' c_tab 'DATAB' c_tab                 'DATBI' INTO outtab-txt.

  • Video wont play in custom component sub-state

    I can't get a video to work while in a sub-state... Basically I have links that play to each sub-state in the component, and one contains a video. When I test it the video will not play not do the buttons on the wire-frame work. Any suggestions?

  • ATV limited to 720p, 24 fps?

    There are many H.264 camcorders nowadays like the Flip MinoHD, VadoHD, Sanyo Xacti and the Kodak Zi6 among others. By default, recording is usually at 720p at 30 fps. The ATV cannot play back these recordings without having to downgrade the format to

  • Oracle 9i Forms in Client/Server Mode (Updates in Technical FAQ)

    Hi All, I'm doing an investigation for porting to Oracle Forms 9i and I've found the answers in Oracle 9i Forms Technical FAQ of February 2003. But since it's been more than three and a half years, I would like to know if the following information in

  • Questions about these two IO classes....

    1) OutputStreamWriter An OutputStreamWriter is a bridge from character streams to byte streams: Characters written to it are encoded into bytes using a specified charset. i dont understand. Converting characters into bytes is understandable, but what