VZ Navigator / Updating Data Files,

I have an LGenv2, running VZNavigator 4.5.1.    Have been using this phone and VZNavigator for over 2 years.
About 2 weeks ago, every time I start Navigator, it displays "Updating Data Files" which takes a few seconds to complete. Then when I go into something, IE: Weather, it then displays "Downloading Announcements", then displays "No new Announcements".
While Navigator works fine otherwise, the delay in doing the same useless tasks on startup just slows it down. After the 3 screens of notices, then it functions normally, until the next startup and it does it again.
Am I doing something wrong?   Is there a setting I missed?
I prefer not to update Navigator based on all the complaints, and have intentionally kept this older phone so I won't be forced into the latest version of Navigator.
Any thoughts?
Thanks.

I've had the same proble. I am asked to accept or decline their rules way too often and also asked to upgrade. The screen for upgrading does not load properly. Navigator is SLOW and has become a pain in the ***!

Similar Messages

How to update data in a xml file.

I am able to retrieve data from a xml file but not able to update data. Also how can i add or delete node from a xml file.

Hi,
For some time I have also been trying to do the same thing with no success. So far I have tried a few approaches like $.post functions $.ajax post functions and HTML5 fileWriter functions. I am not well aware of the web development techniques but as fas as I understand the post or update of the json file should be done on the serverside mainly because of security issues. I am not sure how appbuilder works entirely and if there is any way to do this.
Have you managed to find a solution ?
(P.S. my goal is to update my chart data which is of course json file. So the idea here is to get some values from the user input and update the json file values then refresh the chart and display it with the new values).
Best Regards,
A.Dyankov.

Updating data from a text file in DW is it possible ?

Hello,
I would like to know if there is a way to update
info that I originally input into DW from a .txt file
using the insert tabular data command.
If anyone know if this is possible, I'd really appreciate
knowing this. I don't mean via means of using php, or anything like
this.
I am talking about updating info in cells on a local
computer.
So for example, a .txt file gets updated, and in turn, DW
will auto-update the table content it sees in the updated .txt
file, or other type of data file.
Thank you for any info

It really depends on how you've saved the data. If you have a simple text file with x data in one column and y data in another, then you can use the code below. It's just a Read From Spreadsheet File, and Index Array, and Bundle function. Modify as needed for your actual data. If you get stuck, post a small example of your data file.
Message Edited by Dennis Knutson on 09-17-2008 11:10 AM
Attachments:
Read XY Graph.PNG ‏3 KB

How do I update Date Time Digitized to match an updated Capture Time for a DNG file?

I am updating capture time based on GPS Time (a bit OCD, I know) but when I change Capture Time the Date Time Digitized value does not change. This in in LR 4.3 and is not affected by whether on not the Catalog is set to 'Write date or time changes into proprietary raw files'. Maybe this is a problem for DNG files only.

GreSep wrote: I saw another LR discussion that said that with LR 4.3 updating Capture Time would also update Date Time Digitized but it does not do so for me on my DNGs (and as of last month ALL my images were converted to DNGs).
One or two intermediate versions of LR 3 (perhaps Lr 3.6) set DateTimeDigitized when you gave the Metadata > Edit Capture Time command. But for people managing scans in which the capture time of the original image was different than the scan time, this behavior overwrote their scan times, so Adobe backed out of that change. Before and since those versions, the Metadata > Edit Capture Time command just changes the EXIF:DateTimeOriginal and related fields in XMP and IPTC.

I am having problems interacting with Microsoft Office programs since the last update:cannot create a pdf through the 'print' menu in exel and both Word and Exel docs sent in Mac Mail end up being received as .dat files.

I am having problems interacting with Microsoft Office programs since the last update:cannot create a pdf through the 'print' menu in exel and both Word and Exel docs sent in Mac Mail end up being received as .dat files.
Both these situations have cropped up on my MacBook Pro since the last update.
Thanks for your help.
Cheers
Bob

The 'Winmail.dat' problem has been extensively covered in these forums, I would search for that (a Google search works well) and unfortunately I have not seen the pdf print problem before, but assuming the software is current and functions normally (other than the pdf print problem) I have no suggestion other than the obvious (but time consuming) re-installation of Office.
I wish I had more

How to update cgicmd.dat file during runtime?

I'd like to know how do update cgicmd.dat file during runtime. For example, I run a report one.jsp as
http://<machine>:<port>/reports/rwservlet?one.jsp&USERID=uid/pwd@db&DESTYPE=cache&mode=bitmap&desformat=htmlcss
within this report there is a hyperlink to open another report named two.jsp.
before creating this hyperlink, I'd like to update cgicmd.dat file with passed in userID, pwd, and connection, so two.jsp can use this key for userinfo
so I can create hyperlink as follows
srw.set_hyperlink('/reports/rwservlet?report=two.jsp'||
'&cmdkey=userinfo&DESTYPE=cache&mode=bitmap&desformat=htmlcss');
Thanks

To my knowledge the cgicmd.dat is only read when the OC4J starts, so you would have to come up with another solution. Using Single-Sign-On (SSO) is quite a good idea, and it's there for cases like this.
Regards,
Martin Malmstrom

No update time stamp in the saved data file

In NI Example Finder, there is a file called "Fieldpoint Datalogger.vi". I flip the "Time Format" switch to "HH:MMS" and the "File Type" switch to "Spreadsheet". The data saved into a file have time stamp at each line. However, the time stamp in each line of the data file saved as the same time without any update to the most current time. I put sampling frequency for 100 ms and saved as 50K bytes file size, but all the time stamps in the file show one same time (I believe it is the time to start to save into file and keep repeat it). How can I get the update time stamp for every 100ms or 500ms and save that time stamp into the data file from this "Fieldpoint Datalogger.vi"? Should I change anything on the subVI called
"embedded FPLog.vi"?

Hello,
Fieldpoint systems usually base the timestamp on the National Instruments Time Server, which is installed on any computer using the Fieldpoint driver. This means that you can configure the Time Server on a Fieldpoint system to continuously check the system time of any computer on the network that has the Fieldpoint Driver installed by referencing its IP address.
If the timestamp is not updating, then we should first verify that it has been configured properly.
Take a look at the following Knowledge Base and let us know if using the listed steps takes care of this issue.
http://digital.ni.com/public.nsf/websearch/C4E56AD6450FC5FD86256DFF0007FF01?OpenDocument
Best regards,
Justin Tipton
National Instruments

WSA Webroot Malware Category DAT files Not Updating

I have two wsa's that have not updated their webroot dat files since may 16th. I have tried a manual update and it still has not updated. I am not sure if any new updates have been released and availalbe. Is there a way I can verify what the most recent dat files are??

Did you ever resolve this issue. I have the webroot failing to update aswell. Will log a TAC case, but checking to see if you have had any progress?
Ben

Camera Raw updates Date Taken in JPG Files

Hi,
I have CS6/CR 7.2. I have had this issue where my file dates became changed (8000 odd files) so I had to restore 23000 files from backup .
When investigating trying to find out what happened. when I open a JPG from Windows Explorer, photoshop is set to use Camera Raw for jpg files on open (ok). If I cancel the dialog, nothing happens (ok). If I click Done or Open Image, the file itself has the "Date Taken" time updated - 7 hours ahead of the original correct time.
This pretty much matches the date issue I have on the 8000 files. Is this expected behaviour? Why would Camera Raw update Date Taken and did it choose 8 hours because I am in the PST timezone (GMT-8 or currently GMT-7 with daylight savings)?
I have reproduced this on 4 or file random files - taking copies and comparing afterwards.
Thanks!
Mark.

Camera Raw writes your JPEG files back out with updated metadata no matter what settings you choose, because Adobe feels they understand the format of metadata in the files well enough to be confident they will not corrupt the files.
I've asked them for years to avoid doing that, to no avail. I don't want my original files re-written. It sounds as though you are of a like mind.
It is for this reason that I *never* open a JPEG file through Camera Raw.
It's possible there is a time zone problem or something, but that's not the point. What, specifically, is corrupted is less important than Adobe believing it's okay to write back to your JPEG files. That you have actually seen something corrupted is testament to it not being unfounded paranoia.
Generally I'm supportive of Adobe's design decisions, but absolutely not on this issue. All I ask is that Adobe honor the "keep settings in the central database" preference choice for ALL input files, not just those for which they would otherwise write an XMP file. I don't think it's too much to ask.
By the way, you might want to visit the Camera Raw-specific forum and make note of your issue there:
http://forums.adobe.com/community/cameraraw
-Noel

Incorrect (and constant) File Update Date

Hi,
No matter on which date I actually create or update a file, the "modified date" now always appears as Jan 5 2012. Even files I haven't touched for years now reflect this date. This problem only started about two weeks ago when I was trying to change the appearance of the date-time in the upper right corner of the screen. So it's pretty clear that I have somehow managed to screw things up.
Any ideas how to fix this problem? I'd appreciate it.
Regards,
Jack

Go to System Preferences > Language & Text > Formats. In the Date section, click the Customize button.
The upper four boxes (Short, Medium, Long, and Full) should contain only blue ovals plus any appropriate separators (like commas or slashes). If any of those contain plain text, remove it and replace with blue ovals dragged up from the lower section.
Note that those ovals contain sample info only; they are not intended to display actual (current) date info in that window.

How to read updated data from a real-time generated file?

I have a question:
I want to read the 10 mostly updated data from a real time generated data file. The data in this file is accumulated. how can i read mostly recently data to an applet? and further to using this data to draw a real-time graph? pls help
kelvin t.l. tse

Hi,
I think there is no "typical" way. You will have to define a convention on how the new data are stored into the file, so as to know how to accessthem. If new data are simply put at theend of your file, you may use a RandomAccessFile to read only those lines that interest you (the 1 final lines).Otherwise, you should at least know how the data file is written.
You can know if thedata file has been modified with the File.lastModified() method. This retrurns a long value corresponding to the date and hour the file was last modified. Store that value ito you appl. and perdiodically (use a Thread), compare that value with the value returned by lastModief(). If both value are NOt equal, then the file has been updated
it's all a question of knowing how the data are stored into the datafie generated.
Be also aware that you will probably have problem when your java appl. tries to read the file at the same time it is updated by the other application. I guess when theother application writes data into the file, you will not be able to read it. So, use try{} catch statements and first check to see if you can read the file with File. canRead(). If not, simply delay the reading process by asking a Thread.yield() or Thread.delay (1000)...
vincent

SQL 2008 R2 - Mirror sys.master_files data file size not updating

Hi,
I have an odd issue where the primary server is SQL 2008 R2 SP1 and the secondary is SQL 2008 R2 SP2. I have databases mirroring between these servers. We recently moved the log file on the secondary to a different drive. The file sizes match and are updating
exactly the same between both servers. The mirror monitor shows the mirroring successful and everything is up to date. When we check the sys.master_files tables on the mirror, the size of the data file has not updated since moving the log file. Tried restarting
SQL but not joy.
Anyone have any ideas?
Thanks
Rob

Hi,
I would say you wait for some time it would get reflected I have seen this with sys.master_files they are updated late. Like when you delete heavy data, data would be gone but space captured by data would be released slowly due to internal ghost operation
cleaning and after this operation completes sys.master_files catalog is updated I guess this is what happening here as well , this is pure speculation. I will stick to this thread please look for a day and then update again
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

McAfee DAT FIle Update Locks Up LabVIEW

Here is some background... DAQ MIO PCI card, SCXI rack, 128 TC channels at 10 scans/second, graphing 20 channels every 2 seconds, datalogging once/minute. Datalog file is opened and closed during each write operation.
Manual VS conducted when LabVIEW is not running.
While running LabVIEW, Altiris Agent and EPolicy push down daily McAfee DAT updates. Coincidently, LabVIEW locks ups/crashes when the DAT file is pushed down to the machine. Graph, datalog file and McAfee On-Access Scan Log verify the time of event.
The obvious answer would be to disable Altiris Agent and EPolicy. However, this does not occur on other similarily configured machines, and for network management purposes this is not a consideration. Any suggestions?
JPK
Solved!
Go to Solution.

Been there done that...
If McAffe does not let you configure or control when where and how then you may end up having to do what one of my customers ended up doing.
They pull the network cable before a test starts and put it back after the test is over.
"A man (PC) can note serve two masters."
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Updating iTunes always deletes the data file behind my music in my library

Hopefully, someone can help me. Everytime I update my iTunes, it somehow deletes the data files for my songs even though the song still appears in my library. When I go to listen or sync to my ipod it says it can't find the original data files and so I have to re-load all my CDs again, so I just basically don't update itunes anymore.
Can anyone tell me why this is going on and how I can stop this from happening so that I can update itunes without losing all my songs?
Thanks a bunch in advance!

This appears to be a common problem lately on some computers ...try the following:
Disconnect any iPod from the computer
Temporarily remove any hackies or beta apps
Make sure iTunes is in the original Apple install location=Applicatons Folder
Refer to these Apple info docs:
http://docs.info.apple.com/article.html?artnum=301749e
http://docs.info.apple.com/article.html?artnum=93313
Remember .... Seek and Ye shall find!!
DIXIE

Final cut update corrupted my data files

I downloaded the new update to Final Cut X
.. everythinng was working fine before this download... and I thought it was working fine after it.. i edited a video.. and it was working fine.. but when I went to export it.. it wouldn't export. I clicked on Youtube.. and nothing happened... i couldn't see anything working.
So i went to export it as a master file to see if that would work... and then it told me I had to update old files to make things work.. and it then told me i have corrupted files ( 2 of them)... I tried to just delete them but it won't let me..
So i tried to contact Apple... and the Final Cut support team wants $800 to answer questions.. or $100 per question. For a $299 program? .. seriously?
anyway..
I can't delete these files.. can't fix things.. i went to the Library folder and reset the preferences and still nothing works.. it now just says FInal cut is shutting down because to maintain the integrity of other files..
does anyboidy know what to do?
I don't exactly want to have to spend $800 for a problem that APPLE created with their download. They created the problem and they won't fix it. I find that incredibly arrogant. If their download created the problem shouldn't they help fix the problem?
in any case.. anyone have a solution ?

Ron Camilleri wrote:
...Isn't it funny how the hard drive worked fine before and after the conversion the only files that magically disappeared were the ones that went through this conversion process. If a hard drive is corrupted shouldn't it have problems with other files too? All the other files are there on the hard drive and work fine...
No, actually not. That is exactly what is seen again and again and again when the HD index becomes corrupted!
I have seen people wonder 'where did that file go.. oh, I will find it latter...' and a [day|week|month] latter, the complete disk is useles.
If you are VERY lucky, Disk Utility will try to fix it, but it might only do so. The problem with D.U. is that it tries to repair the current index, not rebuild it.
Only tool I have ever found to be able to do so, is DiskWarrior.
And to my knowledge, FCPX does not have any rutines to delete the files during the update! It will ask to update the Event & Project files, but that is only the XML files, not the media files!
This screems: BACKUP NOW and do NOT write any other file to the disk! That is, if you have anything valuable on the disk...

VZ Navigator / Updating Data Files,

Similar Messages

Maybe you are looking for