VZAccess Manager activation error WMC671 - using LG600
I can no longer connect to the internet through my LG600. I get an error WMC671 when I click Connect.
I've rebooted, reinstalled VZAccess Manager, Upgraded the device drivers, and used differnet USB ports.
Anyone have any other suggestions?
The LG VL600 device draws the maximum amount of power through the USB port, which conflicts with Windows power management system. The computer attempts to manage the power of the connection, which causes the WMC671 error that you are receiving. The LG is performing to specification, and it is drawing an approved amount of power through the USB port, but the computer system is cutting and managing power in an attempt to extend the battery life of the laptop. To resolve this error code, please making the following adjustments to the computer:
1. Go to the Control Panel in Windows. You may access this by going to: Start > Settings > Control Panel.
2. Make sure you are in "Classic View" as opposed to "Category View" and select "Device Manager".
3. Scroll on down to the "Universal Serial Bus Controllers", expand the category and look for any "USB Root Hubs".
4. Right click each "USB Root Hub" and select "Properties"
5. Click the "Power Management" tab at the top of the new window.
6. Uncheck the "Allow the computer to turn off this device to save power." check box.
7. Save, exit, close out of Device Manager and remove the USB modem.
8. Reboot the computer, plug the modem back in, and access the internet.
Similar Messages
-
Using VZAccess Manager v7 With Sierra Wireless SB555 Embedded Device
We have several Panasonic CF-29 Toughbooks with embedded Sierra Wireless SB555 devices. Up to now we were running VZAccess Manager v6.9 on these laptops without any issues.
For consistency sake we want to upgrade VZAccess Manager in these laptops to v7. From what I could determine VZAccess Manager 7 should work with the SB555 devices. This is where I came across an issue.
After installing VZAccess Manager v7 the Verizon Wireless - VZAccess dial-up networking connection was not created. Trying to connect failed: Connection not available.
I manually created the connection and I was able to connect. The problem is that whenever I use Detect Device VZAccess Manager deletes the connection and a new one is not created.
I have a temporary solution by creating a connection named BACKUP Verizon Wireless - VZAccess and then when needed just duplicate this backup connection and rename it properly. At least that is a solution in the lab.
This leads to 3 questions:
Is there a way to make VZAccess anager create the connection as it normally should?
When the automatic area coverage updating takes place, does that trigger a Detect Device? If it does not I guess I am safe to believe that the connection will not be deleted in the field.
Is there a way to reduce the time between the coverage area updates so that I can test this in the lab without having to wait days or weeks for it to happen on its own?
Thanks!I would recommend uninstalling the current version of VZAM on the PC, and installing the VZAM software from www.vzam.net. I have listed the instructions below on navigating to the software.
Once on the VZAM home page, select supported devices on the red menu located on the left hand side of the screen
Scroll towards the bottom of the page for Laptops with Embedded Verizon Wireless WWAN Module
The 4th selection from the top is labeled “Panasonic Toughbook with global module.” Click on the version number that fits your Windows OS
Enter your wireless number
Before you download, check the two links below on whether you will need drivers for the WWAN device, or the Toughbook itself. I have listed the link below:
http://panasonic.com/toughbook/support
http://www.vzam.net/UploadedFiles/Pan03_RevA_Driver.exe
If you are okay with the drivers, you can proceed to download the VZAM software by clicking the red download now button. Once selected, save the file to your desktop and install the software
***Download version 7.2.9 (2470a) for either Windows XP/Vista or Windows 7
***If step 1 is completed successfully (the drivers installed, the device was found, and the set up completed), the VZAM network connection will be automatically built.
2. At the point that the automatic coverage update initiates, it has already detected the device. (If a device is not detected, you will not be able to activate it or update the coverage information.)
3. To reduce the amount of time a coverage update can take, you can periodically perform a activation on the device. This can be done by selecting the “options” tab at the top of the VZAM menu, and select “activation”. This process will update the PRL (Preferred Roaming List) and coverage area.
I hope this information was helpful. -
Ask timesten 11.2 Using Oracle Clusterware to Manage Active Standby Pair
Using Oracle Clusterware to Manage Active Standby Pairs
http://download.oracle.com/docs/cd/E13085_01/doc/timesten.1121/e13072/cluster.htm#CCHCFAAD
What is that mean ?
I have to use Share Storage for... Oracle Clusterware?
I think right?... or wrong ?
Can I have VIP on Master node, and then master down... standby will active with VIP, right ?A TimesTen A/S pair is a replicated configuation where a pair of TimesTen datastores, usually located on different machines, act in many ways as a single unit. The active master can process both queries and DML (insert/update/delete) while the standby master can only process queries (think of this as a little like Active Dataguard). Applications that run on the same machine as one of the TT datastores can connect to it via the very high performance 'direct mode' while applications running on other machines can access the datastores in client/server mode. There is a clearly defined procedure for failing over if the active master fails (which involves promoting the standby master to active) and for recovering a failed store back to the correct role. Direct mode applications must failover with the datastore whereas for client/server applications the connection(s) need to be failed over. The basic A/S pair replication mechanism has been available since TimesTen 6.0. The replication configuration is defined via special SQL syntax and monitoring and management (failover control etc.) is performed by way of built-in procedure calls. However, in TT 6.0 and 7.0 the actual monitoring and management of the A/S pair, including failover, is left for the user to implement themselvses or via some custom integration with an external cluster manager.
TimesTen 11g adds two major new capabilities:
1. Automatic client connection failover for client/server connections. Think of this as very similar to Oracle DB TAF and FAN. This does not require VIPs or Clusterware since it is implemented completely within TimesTen. However it works very well when used in onjunction with Clusterware.
2. A deep integration between TimesTen and Oracle Clusterware. All aspects of Timesten A/S pair definition, deployment, management and recovery are handled by Clusterware. There is just a single configuration file and a single TimesTen utility (ttCWAdmin) involved. Of course you need a properly configured Clusterware setup first which will require some form of shared storage (for OCR and voting disks) but TT storage (checkpoint and log files) does not need to be on shared storage. Setting up TT for use with Clusterware is very quick and easy (maybe 30 minutes the first time you do it and much quicker thereafter once you know what you are doing). From then on Clusterware will manage all aspects of failover and recovery completely automatically. VIPs are not required but can be used if desired e.g. for application failover purposes. Clusterware can also manage the failover of direct mode applications. Also, you can define automated backup cycles and spare nodes that can be used if a node suffers some permanent failure. The Clusterware integration offers very rich functionality but also very fast failover (typically just a few seconds in my testing).
Hope that helps clarify.
Chris -
Adobe Activation error I bought a used CS2 application with serial numbers: it loads fine and works, but I cannot activate it and it will run out in 26 days. I bought it on ebat for 40 dollars. I am willing to pay a royalty fee. In 2006, or so, I bought a student version of CS2 at the College bookstore legally and registered it and it is still running on my 2002 eMac, but my Mac cannot communicate with my wireless printer I just got. So I looked for a copy of CS2 to put on my second hand IBM PC.
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3
-
On 3-25-11, while logging onto VZAccess Manager, I received a notice that an update for access manager was available. After downloading and installing it, I can only log on as WiFi. When the fivespot is connected via USB cable, VZAccess manager does not recognize the device is connected. This did not occur until the update was installed. I deleted VZAccess manager and downloaded the update online (in case something went wrong during the original download) and the same thing happens. Anyone else having this problem?
Hi community,
I want you both to be able to fully use your USB modem so lets review these errors to get them corrected. The "Location Update" is run by the network and device. As the device is 3G it requires updates with the tower to occur and it's set in the device to automatically ask for the update every 30 days. To prevent this from occurring with a remote access, a manual update can be run from the direct computer when available. As long as it's run before day 30 arrives, the prompt should not reappear. To run the update please go to VZAccess Manager menu -> Options -> Activation.
The WiFi Location prompt can be eliminated with two steps. The first will be to complete the software update to VZAccess Manager 7.3. This can be done by visiting http://vzam.net. Follow the steps to input the operating system for the computer and then select the device. Run and install the update. Once that is done go to VZAccess Manager menu and select Options -> Preferences -> WiFi (on the left menu) -> and under Use this Wi-Fi adapter select None. Please keep us posted with these fixes.
Thank you,
MariaC_VZW
Please follow us on Twitter @VZWSupport -
Adobe Application Manager Download Error (and other problems)
Last week I purchased a Creative Cloud membership (Student and Teacher Edition, if that matters at all). When I tried to download applications, the Adobe Application Manager seemed to be unable to connect and instead displayed "Download Error. Press Retry to try again or contact customer support." I read some of the responses to this problem on the forums, and after trying several things, I got it to work (I'm honestly not sure what I did that caused it to work). However, it is now failing to work again and I can't seem to fix it this time. As an additional problem, When I tried to open Adobe Premiere Pro (which I managed to download when I got the App Manager working for a while), I got the opening screen that asked me to open a project or start a new project. No matter what I clicked on, Premiere Pro closed with an error message. Just as with the App Manager (and at the same time), I managed to get Premiere Pro to work (it seemed to work after I set permissions so I thought I solved it), so I was able to use it for a day. However, now the problem has returned.
I don't know if these two problems are related, but they started working at the same time and stopped working at the same time, so I'm posting them together in case there is a connection. I am running Windows Vista on my home computer. I can sign on to the creative cloud online without problem so it recognizes me as a creative cloud subscriber. My Internet connection is working fine. I have disabled all firewalls and it still doesn't work. Very frustrating, obviously.
Thanks for your time and any help or suggestions you can give.
- KPKardypaine for your Internet configuration difficulties I would recommend reviewing Sign in or activation errors | CS6, CS5.5 Subscriptions, CS6 Perpetual - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html.
For the failure of Premiere Pro to open you will want to review the install log to see if you received an installation error. You can find details on how to locate and interpret the installation logs at Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html. -
0IC_C03: 2LIS_03_BF Transformation Start Routine Activation error
Hi all,
Iam getting activation error (Start Routine) while activating the transformation for the 2LIS_03_BF (Material Movements) data source for 0IC_C03 INFO CUBE. Iam getting an error for the Start Routine and the error message is as follows:
+ E:In PERFORM or CALL FUNCTION "ROUTINE_9998", the actual parameter "SOURCE_PACKAGE" is incompatible with the formal parameter "DATA_PACKAGE".+
Scenario: As per my client requirment i have tried to add on info object in to the existing info cube i.e., Movement Type which is an existing field in the info source and the data source and i have tried to map the same in the transformations between the info source and the info cube and activated the transformation. Then iam getting the above said start routine error, so to avoid this i have removed that object i.e., movement type from the info cube and tried to reactivate the transformations still iam getting the same routine error.
Please suggest me th approach to resolve this issue.
Regards,
PrabhakarHi Chandu,
Please find below is the routine:
PROGRAM trans_routine.
CLASS routine DEFINITION
CLASS lcl_transform DEFINITION.
PUBLIC SECTION.
Attributs
DATA:
p_check_master_data_exist
TYPE RSODSOCHECKONLY READ-ONLY,
*- Instance for getting request runtime attributs;
Available information: Refer to methods of
interface 'if_rsbk_request_admintab_view'
p_r_request
TYPE REF TO if_rsbk_request_admintab_view READ-ONLY.
PRIVATE SECTION.
TYPE-POOLS: rsd, rstr.
Rule specific types
TYPES:
BEGIN OF tys_SC_1,
InfoObject: 0STORNO Reversal Indicator.
STORNO TYPE /BI0/OISTORNO,
InfoObject: 0RT_PROMO promotion.
RT_PROMO TYPE /BI0/OIRT_PROMO,
InfoObject: 0VAL_CLASS Valuation class.
VAL_CLASS TYPE /BI0/OIVAL_CLASS,
InfoObject: 0DOC_DATE Document Date.
DOC_DATE TYPE /BI0/OIDOC_DATE,
InfoObject: 0STOCKTYPE StockType.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0STOCKCAT Stock Categories.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0PSTNG_DATE Posting date in the document.
PSTNG_DATE TYPE /BI0/OIPSTNG_DATE,
InfoObject: 0COMP_CODE Company Code.
COMP_CODE TYPE /BI0/OICOMP_CODE,
InfoObject: 0BWAPPLNM Application component.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0MOVETYPE movement Type (Inventory Management).
MOVETYPE TYPE /BI0/OIMOVETYPE,
InfoObject: 0STOCKRELEV BW: Relevance to Stock.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0CPPVLC BW: Purchase Value in Local currency.
CPPVLC TYPE /BI0/OICPPVLC,
InfoObject: 0CPSVLC BW: Sales Value in Local currency.
CPSVLC TYPE /BI0/OICPSVLC,
InfoObject: 0CPSTLC BW: Sales Value in Local currency.
CPSTLC TYPE /BI0/OICPSTLC,
InfoObject: 0CPQUABU BW: Amount in base unit of Measure.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0VAL_TYPE Valuation Type.
VAL_TYPE TYPE /BI0/OIVAL_TYPE,
InfoObject: 0PROCESSKEY BW: Transaction Key.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0BATCH Batch number.
BATCH TYPE /BI0/OIBATCH,
InfoObject: 0MATMREA Reason for Goods Movement.
MATMREA TYPE /BI0/OIMATMREA,
InfoObject: 0BUS_AREA Business Area.
BUS_AREA TYPE /BI0/OIBUS_AREA,
InfoObject: 0COSTCENTER Cost Center.
COSTCENTER TYPE /BI0/OICOSTCENTER,
InfoObject: 0SOLD_TO Sold-to Party.
SOLD_TO TYPE /BI0/OISOLD_TO,
InfoObject: 0WHSE_NUM Warehouse Number / warehouse complex.
WHSE_NUM TYPE /BI0/OIWHSE_NUM,
InfoObject: 0STOR_LOC Storage Location.
STOR_LOC TYPE /BI0/OISTOR_LOC,
InfoObject: 0STRGE_BIN Storage Bin.
STRGE_BIN TYPE /BI0/OISTRGE_BIN,
InfoObject: 0STRGE_TYPE Storage Type.
STRGE_TYPE TYPE /BI0/OISTRGE_TYPE,
InfoObject: 0VENDOR Vendor.
VENDOR TYPE /BI0/OIVENDOR,
InfoObject: 0MATERIAL Material.
MATERIAL TYPE /BI0/OIMATERIAL,
InfoObject: 0DOC_NUM BW: Document Number.
DOC_NUM TYPE /BI0/OIDOC_NUM,
InfoObject: 0BASE_UOM Base Unit of Measure.
BASE_UOM TYPE /BI0/OIBASE_UOM,
InfoObject: 0DOC_YEAR BW: Document Year.
DOC_YEAR TYPE /BI0/OIDOC_YEAR,
InfoObject: 0PROFIT_CTR Profit center.
PROFIT_CTR TYPE /BI0/OIPROFIT_CTR,
InfoObject: 0DCINDIC Debit/Credit Indicator.
DCINDIC TYPE /BI0/OIDCINDIC,
InfoObject: 0LOC_CURRCY Local currency.
LOC_CURRCY TYPE /BI0/OILOC_CURRCY,
InfoObject: 0PLANT Plant.
PLANT TYPE /BI0/OIPLANT,
InfoObject: 0FISCVARNT Fiscal year variant.
FISCVARNT TYPE /BI0/OIFISCVARNT,
InfoObject: 0CPNOITEMS BW: Number of activities.
CPNOITEMS TYPE /BI0/OICPNOITEMS,
InfoObject: 0CO_AREA Controlling Area.
CO_AREA TYPE /BI0/OICO_AREA,
InfoObject: 0DOC_ITEM BW: Document Line Number.
DOC_ITEM TYPE /BI0/OIDOC_ITEM,
InfoObject: 0VALUE_LC Amount in local currency.
VALUE_LC TYPE /BI0/OIVALUE_LC,
InfoObject: 0QUANT_B Quantity in base units of Measure.
QUANT_B TYPE /BI0/OIQUANT_B,
InfoObject: 0MOVE_PLANT Receiving Plant/Issuing Plant.
MOVE_PLANT TYPE /BI0/OIMOVE_PLANT,
InfoObject: 0RECORDMODE BW Delta Process: Update Mode.
RECORDMODE TYPE RODMUPDMOD,
InfoObject: 0RT_RMAPIDA RMA Physical Inventory Date.
RT_RMAPIDA TYPE /BI0/OIRT_RMAPIDA,
InfoObject: 0BWCOUNTER Additional Key Field Revaluation Document
*Record.
BWCOUNTER TYPE /BI0/OIBWCOUNTER,
InfoObject: 0INDSPECSTK Indicator: Valuation of Special stock.
INDSPECSTK TYPE /BI0/OIINDSPECSTK,
InfoObject: 0GN_R3_SSY Source System for R/3 Entity.
GN_R3_SSY TYPE /BI0/OIGN_R3_SSY,
InfoObject: 0RT_MOVINV movement Type is Physical Inventory.
RT_MOVINV TYPE /BI0/OIRT_MOVINV,
InfoObject: 0RT_MOVADJ movement Type is Stock Adjustment.
RT_MOVADJ TYPE /BI0/OIRT_MOVADJ,
InfoObject: 0RSL_STMAT Structured Article.
RSL_STMAT TYPE /BI0/OIRSL_STMAT,
InfoObject: 0RT_MOVRET movement Type is Return.
RT_MOVRET TYPE /BI0/OIRT_MOVRET,
InfoObject: 0RSL_STAUTO Automatically Completed Component.
RSL_STAUTO TYPE /BI0/OIRSL_STAUTO,
InfoObject: 0RT_MOVTRAN movement Type is Stock Transfer.
RT_MOVTRAN TYPE /BI0/OIRT_MOVTRAN,
InfoObject: 0RT_MATPOST Transfer Posting from Article to Article
RT_MATPOST TYPE /BI0/OIRT_MATPOST,
InfoObject: 0RT_SASTSV Share of Business Volume for Set Sales Val
*ue in Local crcy.
RT_SASTSV TYPE /BI0/OIRT_SASTSV,
InfoObject: 0RT_SASTST Share of Business Volume for Set with Tax
*in Local currency.
RT_SASTST TYPE /BI0/OIRT_SASTST,
InfoObject: 0COORDER order number.
COORDER TYPE /BI0/OICOORDER,
InfoObject: 0RMA_LNK RMA Stock Transfer Reference Item.
RMA_LNK TYPE /BI0/OIRMA_LNK,
InfoObject: 0RMA_RFLG RMA Relevance Flag.
RMA_RFLG TYPE /BI0/OIRMA_RFLG,
InfoObject: 0RTHFEES Stock Transfer Fees.
RTHFEES TYPE /BI0/OIRTHFEES,
Field: RECORD.
RECORD TYPE RSARECORD,
END OF tys_SC_1.
TYPES:
tyt_SC_1 TYPE STANDARD TABLE OF tys_SC_1
WITH NON-UNIQUE DEFAULT KEY.
$$ begin of global - insert your declaration only below this line -
... "insert your code here
$$ end of global - insert your declaration only before this line -
METHODS
start_routine
IMPORTING
request type rsrequest
datapackid type rsdatapid
EXPORTING
monitor type rstr_ty_t_monitors
CHANGING
SOURCE_PACKAGE type tyt_SC_1
RAISING
cx_rsrout_abort.
METHODS
inverse_start_routine
IMPORTING
i_th_fields_outbound TYPE rstran_t_field_inv
i_r_selset_outbound TYPE REF TO cl_rsmds_set
i_is_main_selection TYPE rs_bool
i_r_selset_outbound_complete TYPE REF TO cl_rsmds_set
i_r_universe_inbound TYPE REF TO cl_rsmds_universe
CHANGING
c_th_fields_inbound TYPE rstran_t_field_inv
c_r_selset_inbound TYPE REF TO cl_rsmds_set
c_exact TYPE rs_bool.
ENDCLASS. "routine DEFINITION
$$ begin of 2nd part global - insert your code only below this line *
TYPES:
BEGIN OF tys_SC_1_full,
InfoObject: 0STORNO Stornokennzeichen.
STORNO TYPE /BI0/OISTORNO,
InfoObject: 0RT_PROMO Aktion.
RT_PROMO TYPE /BI0/OIRT_PROMO,
InfoObject: 0VAL_CLASS Bewertungsklasse.
VAL_CLASS TYPE /BI0/OIVAL_CLASS,
InfoObject: 0DOC_DATE Belegdatum.
DOC_DATE TYPE /BI0/OIDOC_DATE,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0PSTNG_DATE Buchungsdatum im Beleg.
PSTNG_DATE TYPE /BI0/OIPSTNG_DATE,
InfoObject: 0COMP_CODE Buchungskreis.
COMP_CODE TYPE /BI0/OICOMP_CODE,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0MOVETYPE Bewegungsart (Bestandsführung).
MOVETYPE TYPE /BI0/OIMOVETYPE,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0CPPVLC BW: Einkaufswert in Hauswährung.
CPPVLC TYPE /BI0/OICPPVLC,
InfoObject: 0CPSVLC BW: Verkaufswert in Hauswährung.
CPSVLC TYPE /BI0/OICPSVLC,
InfoObject: 0CPSTLC BW: VerkWmS Hauswährung.
CPSTLC TYPE /BI0/OICPSTLC,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0VAL_TYPE Bewertungsart.
VAL_TYPE TYPE /BI0/OIVAL_TYPE,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0BATCH Chargennummer.
BATCH TYPE /BI0/OIBATCH,
InfoObject: 0MATMREA Grund für die Warenbewegung.
MATMREA TYPE /BI0/OIMATMREA,
InfoObject: 0BUS_AREA Geschäftsbereich.
BUS_AREA TYPE /BI0/OIBUS_AREA,
InfoObject: 0COSTCENTER Kostenstelle.
COSTCENTER TYPE /BI0/OICOSTCENTER,
InfoObject: 0SOLD_TO Auftraggeber.
SOLD_TO TYPE /BI0/OISOLD_TO,
InfoObject: 0WHSE_NUM Lagernummer/Lagerkomplex.
WHSE_NUM TYPE /BI0/OIWHSE_NUM,
InfoObject: 0STOR_LOC Lagerort.
STOR_LOC TYPE /BI0/OISTOR_LOC,
InfoObject: 0STRGE_BIN Lagerplatz.
STRGE_BIN TYPE /BI0/OISTRGE_BIN,
InfoObject: 0STRGE_TYPE Lagertyp.
STRGE_TYPE TYPE /BI0/OISTRGE_TYPE,
InfoObject: 0VENDOR Lieferant.
VENDOR TYPE /BI0/OIVENDOR,
InfoObject: 0MATERIAL Material.
MATERIAL TYPE /BI0/OIMATERIAL,
InfoObject: 0DOC_NUM BW: Belegnummer.
DOC_NUM TYPE /BI0/OIDOC_NUM,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
InfoObject: 0DOC_YEAR BW: Belegjahr.
DOC_YEAR TYPE /BI0/OIDOC_YEAR,
InfoObject: 0PROFIT_CTR Profit Center.
PROFIT_CTR TYPE /BI0/OIPROFIT_CTR,
InfoObject: 0DCINDIC Soll-/Haben-Kennzeichen.
DCINDIC TYPE /BI0/OIDCINDIC,
InfoObject: 0LOC_CURRCY Hauswährung.
LOC_CURRCY TYPE /BI0/OILOC_CURRCY,
InfoObject: 0PLANT Werk.
PLANT TYPE /BI0/OIPLANT,
InfoObject: 0FISCVARNT Geschäftsjahresvariante.
FISCVARNT TYPE /BI0/OIFISCVARNT,
InfoObject: 0CPNOITEMS BW: Anzahl Vorgänge.
CPNOITEMS TYPE /BI0/OICPNOITEMS,
InfoObject: 0CO_AREA Kostenrechnungskreis.
CO_AREA TYPE /BI0/OICO_AREA,
InfoObject: 0DOC_ITEM BW: Belegpositionsnummer.
DOC_ITEM TYPE /BI0/OIDOC_ITEM,
InfoObject: 0VALUE_LC Betrag in Hauswährung.
VALUE_LC TYPE /BI0/OIVALUE_LC,
InfoObject: 0COORDER Auftragsnummer.
COORDER TYPE /BI0/OICOORDER,
InfoObject: 0QUANT_B Menge in Basismengeneinheiten.
QUANT_B TYPE /BI0/OIQUANT_B,
InfoObject: 0MOVE_PLANT Empfangendes/Abgebendes Werk.
MOVE_PLANT TYPE /BI0/OIMOVE_PLANT,
InfoObject: 0RECORDMODE BW Deltaverfahren: Update Modus.
RECORDMODE TYPE RODMUPDMOD,
InfoObject: 0RT_RMAPIDA RMA Inventurdatum.
RT_RMAPIDA TYPE /BI0/OIRT_RMAPIDA,
InfoObject: 0BWCOUNTER Zusätzliches Schlüsselfeld Umbewertungsbel
*egsatz.
BWCOUNTER TYPE /BI0/OIBWCOUNTER,
InfoObject: 0INDSPECSTK Kennzeichen Bewertung Sonderbestand.
INDSPECSTK TYPE /BI0/OIINDSPECSTK,
InfoObject: 0GN_R3_SSY Quellsystem der R/3 Entität.
GN_R3_SSY TYPE /BI0/OIGN_R3_SSY,
InfoObject: 0RT_MOVINV Bewegungsart ist Inventur.
RT_MOVINV TYPE /BI0/OIRT_MOVINV,
InfoObject: 0RT_MOVADJ Bewegungsart ist Bestandskorrektur.
RT_MOVADJ TYPE /BI0/OIRT_MOVADJ,
InfoObject: 0RSL_STMAT Strukturierter Artikel.
RSL_STMAT TYPE /BI0/OIRSL_STMAT,
InfoObject: 0RT_MOVRET Bewegungsart ist Retoure.
RT_MOVRET TYPE /BI0/OIRT_MOVRET,
InfoObject: 0RSL_STAUTO Automatisch ergänzte Komponente.
RSL_STAUTO TYPE /BI0/OIRSL_STAUTO,
InfoObject: 0RT_MOVTRAN Bewegungsart ist Umlagerung.
RT_MOVTRAN TYPE /BI0/OIRT_MOVTRAN,
InfoObject: 0RT_MATPOST Umbuchung Artikel an Artikel.
RT_MATPOST TYPE /BI0/OIRT_MATPOST,
InfoObject: 0RT_SASTSV Umsatzanteil am Set Verkaufswert in Hauswä
*hrung.
RT_SASTSV TYPE /BI0/OIRT_SASTSV,
InfoObject: 0RT_SASTST Umsatzanteil am Set Verkaufswert mit Steue
*r in Hauswährung.
RT_SASTST TYPE /BI0/OIRT_SASTST,
Field: RECORD.
RECORD TYPE RSARECORD, END OF tys_SC_1_full.
TYPES:
tyt_SC_1_full TYPE STANDARD TABLE OF tys_SC_1_full
WITH NON-UNIQUE DEFAULT KEY.
TYPES:
BEGIN OF tys_TG_1_full,
InfoObject: 0CHNGID Änderungslauf ID.
CHNGID TYPE /BI0/OICHNGID,
InfoObject: 0RECORDTP Satztyp.
RECORDTP TYPE /BI0/OIRECORDTP,
InfoObject: 0REQUID Request ID.
REQUID TYPE /BI0/OIREQUID,
InfoObject: 0CALDAY Kalendertag.
CALDAY TYPE /BI0/OICALDAY,
InfoObject: 0CALMONTH Kalenderjahr / Monat.
CALMONTH TYPE /BI0/OICALMONTH,
InfoObject: 0CALWEEK Kalenderjahr / Woche.
CALWEEK TYPE /BI0/OICALWEEK,
InfoObject: 0CALYEAR Kalenderjahr.
CALYEAR TYPE /BI0/OICALYEAR,
InfoObject: 0MATERIAL Material.
MATERIAL TYPE /BI0/OIMATERIAL,
InfoObject: 0PLANT Werk.
PLANT TYPE /BI0/OIPLANT,
InfoObject: 0STOR_LOC Lagerort.
STOR_LOC TYPE /BI0/OISTOR_LOC,
InfoObject: 0BATCH Chargennummer.
BATCH TYPE /BI0/OIBATCH,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0GN_VENDOR Lieferant.
GN_VENDOR TYPE /BI0/OIGN_VENDOR,
InfoObject: 0RECVS_VAL Zugangswert Bewerteter Bestand.
RECVS_VAL TYPE /BI0/OIRECVS_VAL,
InfoObject: 0ISSVS_VAL Abgangswert Bewerteter Bestand.
ISSVS_VAL TYPE /BI0/OIISSVS_VAL,
InfoObject: 0ISSBLOSTCK Abgangsmenge Gesperrter Bestand.
ISSBLOSTCK TYPE /BI0/OIISSBLOSTCK,
InfoObject: 0ISSCNSSTCK Abgangsmenge Konsignationsbestand.
ISSCNSSTCK TYPE /BI0/OIISSCNSSTCK,
InfoObject: 0ISSQMSTCK Abgangsmenge Qualitätsbestand.
ISSQMSTCK TYPE /BI0/OIISSQMSTCK,
InfoObject: 0ISSTRANSST Abgangsmenge Transitbestand.
ISSTRANSST TYPE /BI0/OIISSTRANSST,
InfoObject: 0RECBLOSTCK Zugangsmenge Gesperrter Bestand.
RECBLOSTCK TYPE /BI0/OIRECBLOSTCK,
InfoObject: 0RECCNSSTCK Zugangsmenge Konsignationsbestand.
RECCNSSTCK TYPE /BI0/OIRECCNSSTCK,
InfoObject: 0RECQMSTCK Zugangsmenge Qualitätsbestand.
RECQMSTCK TYPE /BI0/OIRECQMSTCK,
InfoObject: 0RECTRANSST Zugangsmenge Transitbestand.
RECTRANSST TYPE /BI0/OIRECTRANSST,
InfoObject: 0ISSSCRP Abgangsmenge Ausschuss.
ISSSCRP TYPE /BI0/OIISSSCRP,
InfoObject: 0ISSVALSCRP Abgangswert Ausschuss.
ISSVALSCRP TYPE /BI0/OIISSVALSCRP,
InfoObject: 0RECTOTSTCK Zugangsmenge Gesamt Bestand.
RECTOTSTCK TYPE /BI0/OIRECTOTSTCK,
InfoObject: 0ISSTOTSTCK Abgangsmenge Gesamtbestand.
ISSTOTSTCK TYPE /BI0/OIISSTOTSTCK,
InfoObject: 0ISSVALSTCK Abgangsmenge Bewerteter Bestand.
ISSVALSTCK TYPE /BI0/OIISSVALSTCK,
InfoObject: 0RECVALSTCK Zugangsmenge Bewerteter Bestand.
RECVALSTCK TYPE /BI0/OIRECVALSTCK,
InfoObject: 0VENCONCON Verbrauchswerte Lieferantenkonsignationsbe
*stand.
VENCONCON TYPE /BI0/OIVENCONCON,
InfoObject: 0LOC_CURRCY Hauswährung.
LOC_CURRCY TYPE /BI0/OILOC_CURRCY,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
Field: RECORD Nummer des Datensatzes.
RECORD TYPE RSARECORD,
END OF tys_TG_1_full.
TYPES:
BEGIN OF tys_SC_1__RULE_9,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_9.
TYPES:
BEGIN OF tys_SC_1__RULE_10,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_10.
TYPES:
BEGIN OF tys_SC_1__RULE_11,
InfoObject: 0GN_R3_SSY Quellsystem der R/3 Entität.
GN_R3_SSY TYPE /BI0/OIGN_R3_SSY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0VENDOR Lieferant.
VENDOR TYPE /BI0/OIVENDOR,
END OF tys_SC_1__RULE_11.
TYPES:
BEGIN OF tys_SC_1__RULE_12,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPPVLC BW: Einkaufswert in Hauswährung.
CPPVLC TYPE /BI0/OICPPVLC,
InfoObject: 0INDSPECSTK Kennzeichen Bewertung Sonderbestand.
INDSPECSTK TYPE /BI0/OIINDSPECSTK,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0LOC_CURRCY Hauswährung.
LOC_CURRCY TYPE /BI0/OILOC_CURRCY,
END OF tys_SC_1__RULE_12.
TYPES:
BEGIN OF tys_SC_1__RULE_13,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPPVLC BW: Einkaufswert in Hauswährung.
CPPVLC TYPE /BI0/OICPPVLC,
InfoObject: 0INDSPECSTK Kennzeichen Bewertung Sonderbestand.
INDSPECSTK TYPE /BI0/OIINDSPECSTK,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0LOC_CURRCY Hauswährung.
LOC_CURRCY TYPE /BI0/OILOC_CURRCY,
END OF tys_SC_1__RULE_13.
TYPES:
BEGIN OF tys_SC_1__RULE_15,
InfoObject: 0GN_R3_SSY Quellsystem der R/3 Entität.
GN_R3_SSY TYPE /BI0/OIGN_R3_SSY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0VENDOR Lieferant.
VENDOR TYPE /BI0/OIVENDOR,
END OF tys_SC_1__RULE_15.
TYPES:
BEGIN OF tys_SC_1__RULE_19,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_19.
TYPES:
BEGIN OF tys_SC_1__RULE_20,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_20.
TYPES:
BEGIN OF tys_SC_1__RULE_21,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0INDSPECSTK Kennzeichen Bewertung Sonderbestand.
INDSPECSTK TYPE /BI0/OIINDSPECSTK,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_21.
TYPES:
BEGIN OF tys_SC_1__RULE_22,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0INDSPECSTK Kennzeichen Bewertung Sonderbestand.
INDSPECSTK TYPE /BI0/OIINDSPECSTK,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_22.
TYPES:
BEGIN OF tys_SC_1__RULE_25,
InfoObject: 0GN_R3_SSY Quellsystem der R/3 Entität.
GN_R3_SSY TYPE /BI0/OIGN_R3_SSY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0VENDOR Lieferant.
VENDOR TYPE /BI0/OIVENDOR,
END OF tys_SC_1__RULE_25.
TYPES:
BEGIN OF tys_SC_1__RULE_31,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPPVLC BW: Einkaufswert in Hauswährung.
CPPVLC TYPE /BI0/OICPPVLC,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0LOC_CURRCY Hauswährung.
LOC_CURRCY TYPE /BI0/OILOC_CURRCY,
END OF tys_SC_1__RULE_31.
TYPES:
BEGIN OF tys_SC_1__RULE_37,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_37.
TYPES:
BEGIN OF tys_SC_1__RULE_38,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_38.
TYPES:
BEGIN OF tys_SC_1__RULE_39,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_39.
TYPES:
BEGIN OF tys_SC_1__RULE_40,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_40.
TYPES:
BEGIN OF tys_SC_1__RULE_41,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_41.
TYPES:
BEGIN OF tys_SC_1__RULE_42,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_42.
TYPES:
BEGIN OF tys_SC_1__RULE_43,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0MOVETYPE Bewegungsart (Bestandsführung).
MOVETYPE TYPE /BI0/OIMOVETYPE,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_43.
TYPES:
BEGIN OF tys_SC_1__RULE_51,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPPVLC BW: Einkaufswert in Hauswährung.
CPPVLC TYPE /BI0/OICPPVLC,
InfoObject: 0MOVETYPE Bewegungsart (Bestandsführung).
MOVETYPE TYPE /BI0/OIMOVETYPE,
InfoObject: 0LOC_CURRCY Hauswährung.
LOC_CURRCY TYPE /BI0/OILOC_CURRCY,
END OF tys_SC_1__RULE_51.
Additional types for start routine interface
TYPES:
data_package_structure type tys_SC_1_full.
Additional declaration for update rule interface
DATA:
MONITOR type standard table of rsmonitor WITH HEADER LINE,
MONITOR_RECNO type standard table of rsmonitors WITH HEADER LINE,
RECORD_NO LIKE SY-TABIX,
RECORD_ALL LIKE SY-TABIX,
SOURCE_SYSTEM LIKE RSUPDSIMULH-LOGSYS.
global definitions from update rules
INCLUDE rsbctgn_top.
INCLUDE rsbctgn_update_rules.
FORM routine_9998
TABLES DATA_PACKAGE TYPE tyt_SC_1_full
CHANGING
ABORT LIKE sy-subrc
RAISING
cx_sy_arithmetic_error
cx_sy_conversion_error.
init variables
fill the internal table "MONITOR", to make monitor entries
see OSS note 571669
LOOP AT DATA_PACKAGE.
IF DATA_PACKAGE-stockcat EQ 'V' OR
DATA_PACKAGE-stocktype EQ 'V'.
DELETE DATA_PACKAGE.
ENDIF.
ENDLOOP.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
ENDFORM. "routine_9998
FORM routine_0012
USING
COMM_STRUCTURE type tys_SC_1__RULE_9
CHANGING
RESULT TYPE tys_TG_1_full-ISSCNSSTCK
RETURNCODE LIKE sy-subrc
ABORT LIKE sy-subrc
RAISING
cx_sy_arithmetic_error
cx_sy_conversion_error.
init variables
fill the internal table "MONITOR", to make monitor entries
only goods issue is considered
IF ( COMM_STRUCTURE-processkey EQ '100' "Other Issues
OR COMM_STRUCTURE-processkey EQ '101' "Returns / Vendor
OR COMM_STRUCTURE-processkey EQ '104' "Material Transfer
OR COMM_STRUCTURE-processkey EQ '105' "Stock Adjustment InvD
OR COMM_STRUCTURE-processkey EQ '106' "Stock Adjustment Other
OR COMM_STRUCTURE-processkey EQ '110' ) "Issue from Stock Transfer
AND COMM_STRUCTURE-bwapplnm EQ 'MM'
only movements which are relevant for stock control
AND COMM_STRUCTURE-stockrelev EQ '1'
AND COMM_STRUCTURE-cpquabu <> 0.
only consignment stock is considered
CASE COMM_STRUCTURE-stockcat.
WHEN 'K'.
RESULT = COMM_STRUCTURE-cpquabu.
RETURNCODE = 0.
WHEN space.
IF COMM_STRUCTURE-stocktype CA 'KLM'.
RESULT = COMM_STRUCTURE-cpquabu.
RETURNCODE = 0.
ELSE.
RETURNCODE = 4.
ENDIF.
WHEN OTHERS.
RETURNCODE = 4.
ENDCASE.
ELSE.
if the returncode is not equal zero, the result will not be updated
RETURNCODE = 4.
ENDIF.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
ENDFORM. "routine_0012
FORM routine_0014
USING
COMM_STRUCTURE type tys_SC_1__RULE_10
CHANGING
RESULT TYPE tys_TG_1_full-RECCNSSTCK
RETURNCODE LIKE sy-subrc
ABORT LIKE sy-subrc
RAISING
cx_sy_arithmetic_error
cx_sy_conversion_error.
init variables
fill the internal table "MONITOR", to make monitor entries
only goods receipt is considered
IF ( COMM_STRUCTURE-processkey EQ '000' "Other Receipts
OR COMM_STRUCTURE-processkey EQ '001' "Goods Receipt / Vendor
OR COMM_STRUCTURE-processkey EQ '004' "Material Transfer
OR COMM_STRUCTURE-processkey EQ '005' "Stock Adjustment InvD
OR COMM_STRUCTURE-processkey EQ '006' "Stock Adjustment Other
OR COMM_STRUCTURE-processkey EQ '010' ) "Receipt from Stock Transfer
AND COMM_STRUCTURE-bwapplnm EQ 'MM'
only movements which are relevant for stock control
AND COMM_STRUCTURE-stockrelev EQ '1'
AND COMM_STRUCTURE-cpquabu <> 0.
only consignment stock is considered
CASE COMM_STRUCTURE-stockcat.
WHEN 'K'.
RESULT = COMM_STRUCTURE-cpquabu.
RETURNCODE = 0.
WHEN space.
IF COMM_STRUCTURE-stocktype CA 'KLM'.
RESULT = COMM_STRUCTURE-cpquabu.
RETURNCODE = 0.
ELSE.
RETURNCODE = 4.
ENDIF.
WHEN OTHERS.
RETURNCODE = 4.
ENDCASE.
ELSE.
if the returncode is not equal zero, the result will not be updated
RETURNCODE = 4.
ENDIF.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
ENDFORM. "routine_0014
FORM routine_0041
USING
COMM_STRUCTURE type tys_SC_1__RULE_11
CHANGING
RESULT TYPE tys_TG_1_full-GN_VENDOR
RETURNCODE LIKE sy-subrc
ABORT LIKE sy-subrc
RAISING
cx_sy_arithmetic_error
cx_sy_conversion_error.
init variables
fill the internal table "MONITOR", to make monitor entries
... determine consolidated key
IF COMM_STRUCTURE-stockcat EQ 'K'.
PERFORM gn_get_global_key TABLES MONITOR
USING COMM_STRUCTURE-gn_r3_ssy
g_c_bwbeoty_r3vendor
COMM_STRUCTURE-vendor
RECORD_NO
RECORD_ALL
CHANGING RESULT
ABORT.
if the returncode is not equal zero, the result will not be updated
Endif.
RETURNCODE = 0.
ENDFORM. "routine_0041
FORM routine_0010
USING
COMM_STRUCTURE type tys_SC_1__RULE_12
CHANGING
RESULT TYPE tys_TG_1_full-ISSVS_VAL
RETURNCODE LIKE sy-subrc
ABORT LIKE sy-subrc
RAISING
cx_sy_arithmetic_error
cx_sy_conversion_error.
init variables
fill the internal table "MONITOR", to make monitor entries
only goods issue is considered
IF ( COMM_STRUCTURE-processkey EQ '100' "Other Issues
OR COMM_STRUCTURE-processkey EQ '101' "Returns / Vendor
OR COMM_STRUCTURE-processkey EQ '104' "Material Transfer
OR COMM_STRUCTURE-processkey EQ '105' "Stock Adjustment InvD
OR COMM_STRUCTURE-processkey EQ '106 -
*FIX?* Adobe Application Manager - Download Error (Creative Cloud)
So I just started the subscription for the Creative Cloud and I downloaded the Adobe Application Manager, which seemed to have installed fine, and when I go into my creative cloud and click download, under for example photoshop, I get Download Error - Contact Customer Support in my AAM (Adobe Application Manager). I have tried many things that people in the forums have suggested from turing off my firewalls, to uninstalled and restarting my computer, I downloaded the most up to date AAM. Any other suggestions? I just got my subscription literally moments ago so I am a little bummed I can't access any of my new software.
I am using a Mac, if that makes any different. Hope someone can help.
Also, when I go to open up the AAM without clicking download for a adobe product the same Download Error pops up.
*So I may have fixed the problem accidentally, I downloaded a trial of photoshop. When I downloaded the photoshop trial it allowed me to use my subscription for my creative cloud. It also had me download the Adobe Download Assistant. I think the Adobe Download Assistant was the thing I was missing, now my AAM seems to let me download the rest of the programs I need. Hope this helps anybody else.*TGarcia if you are on a managed network then please work with your I.T. department to ensure that the Adobe Application Manager/PDApp.exe has proper access to the Internet.
If you are on a non-managed network then please see Sign in or activation errors | CS6, CS5.5 Subscriptions, CS6 Perpetual - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html. -
JRockit1.6-JVM Crash Fatal Error:Broken use of pinObject
[ERROR] JRockit Fatal Error: Unspecified error (52)
[ERROR] Broken use of pinObject
[JRockit] ERROR: The JVM has crashed. Writing crash information to /home/dedp/dedp_domain/jrockit.24865.dump.
===== BEGIN DUMP =============================================================
JRockit dump produced after 28 days, 05:19:03 on Sat May 11 19:39:09 2013
* If you see this dump, please go to *
* http://edocs.bea.com/jrockit/go2troubleshooting.html *
* for troubleshooting information. *
Additional information is available in:
/home/dedp/dedp_domain/jrockit.24865.dump
No snapshot file (core dump) will be created because core dumps have been
disabled. To enable core dumping, try "ulimit -c unlimited"
before starting JRockit again.
Error Message: Unspecified error [52]
Signal info : si_signo=11, si_code=1 si_addr=(nil)
Fatal Error : Broken use of pinObject
Version : BEA JRockit(R) R27.6.5-32_o-121899-1.6.0_14-20091001-2113-linux-x86_64
CPU : Intel (null) (HT) SSE SSE2 SSE3 SSSE3 SSE4.1 SSE4.2 Intel64
Number CPUs : 4
Tot Phys Mem : 16509575168 (15744 MB)
OS version : Red Hat Enterprise Linux Server release 5.8 (Tikanga)
Linux version 2.6.18-308.el5 ([email protected]) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-50)) #1 SMP Fri Jan 27 17:17:51 EST 2012 (x86_64)
Thread System: NPTL
Java locking : Lazy unlocking enabled (class banning) (transfer banning)
State : JVM is running
Command Line : -server -Xms512m -Xmx1024m -XX:MaxPermSize=128m -da -Dplatform.home=/home/weblogic/bea/wlserver_10.3 -Dwls.home=/home/weblogic/bea/wlserver_10.3/server -Dweblogic.home=/home/weblogic/bea/wlserver_10.3/server -Dweblogic.management.discover=true -Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=/home/weblogic/bea/patch_wls1030/profiles/default/sysext_manifest_classpath:/home/weblogic/bea/patch_cie660/profiles/default/sysext_manifest_classpath -Duser.country=US -Duser.language=en -Dweblogic.Name=AdminServer -Djava.security.policy=/home/weblogic/bea/wlserver_10.3/server/lib/weblogic.policy -Dsun.java.launcher=SUN_STANDARD weblogic.Server
java.home : /home/weblogic/jdk1.6/jre
j.class.path : :/home/weblogic/bea/patch_wls1030/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/home/weblogic/bea/patch_cie660/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/home/weblogic/jdk1.6/lib/tools.jar:/home/weblogic/bea/wlserver_10.3/server/lib/weblogic_sp.jar:/home/weblogic/bea/wlserver_10.3/server/lib/weblogic.jar:/home/weblogic/bea/modules/features/weblogic.server.modules_10.3.0.0.jar:/home/weblogic/bea/wlserver_10.3/server/lib/webservices.jar:/home/weblogic/bea/modules/org.apache.ant_1.6.5/lib/ant-all.jar:/home/weblogic/bea/modules/net.sf.antcontrib_1.0.0.0_1-0b2/lib/ant-contrib.jar::/home/weblogic/bea/wlserver_10.3/common/eval/pointbase/lib/pbclient57.jar:/home/weblogic/bea/wlserver_10.3/server/lib/xqrl.jar::
j.lib.path : /home/weblogic/jdk1.6/jre/lib/amd64/jrockit:/home/weblogic/jdk1.6/jre/lib/amd64:/home/weblogic/jdk1.6/jre/../lib/amd64::/home/oracle/db/product/11.2.0/client/lib:/home/oracle/db/product/11.2.0/client/rdbms/lib:/lib:/usr/lib:/home/weblogic/bea/wlserver_10.3/server/native/linux/x86_64:/home/weblogic/bea/wlserver_10.3/server/native/linux/x86_64/oci920_8
JAVA_HOME : /home/weblogic/jdk1.6
JAVAOPTIONS: <not set>
LD_LIBRARY_PATH: /home/weblogic/jdk1.6/jre/lib/amd64/jrockit:/home/weblogic/jdk1.6/jre/lib/amd64:/home/weblogic/jdk1.6/jre/../lib/amd64::/home/oracle/db/product/11.2.0/client/lib:/home/oracle/db/product/11.2.0/client/rdbms/lib:/lib:/usr/lib:/home/weblogic/bea/wlserver_10.3/server/native/linux/x86_64:/home/weblogic/bea/wlserver_10.3/server/native/linux/x86_64/oci920_8
LD_PRELOAD : <not set>
LD_ASSUME_KERNEL: <not set>
StackOverFlow: 20 StackOverFlowErrors have occured
OutOfMemory : 0 OutOfMemoryErrors have occured
C Heap : Good; no memory allocations have failed
GC Strategy : Mode: throughput. Currently using strategy: singleparpar
GC Status : OC is not running. Last finished OC was OC#1080.
: YC is not running. Last finished YC was YC#5587.
OC History : Strategy singleparpar was used for OC#1053.
: Strategy genparpar was used for OC#1054 to OC#1075.
: Strategy singleparpar was used for OC#1076.
: Strategy genparpar was used for OC#1077 to OC#1078.
: Strategy singleparpar was used for OC#1079 to OC#1080.
YC History : Ran 0 YCs before OC#1076.
: Ran 6 YCs before OC#1077.
: Ran 0 YCs before OC#1078.
: Ran 0 YCs before OC#1079.
: Ran 0 YCs before OC#1080.
: Ran 0 YCs since last OC.
YC Promotion : Last YC successfully promoted all objects
Heap : 0x42800000 - 0x62800000 (Size: 512 MB)
Compaction : 0x48800000 - 0x4a800000 (Current compaction type: external)
CompRefs : References are compressed, with heap base 0x0.
Registers (from ThreadContext: 0x414769c0 / OS context: 0x41476a80):
rax = 0000000000000017 rcx = 0000000041476d40
rdx = 00000000ffffffff rbx = 00002b312e576b94
rsp = 0000000041476ec0 rbp = 0000000041476ec0
rsi = 00002b312e576bab rdi = 00002b312e6a5ed7
r8 = 7463656a624f6e69 r9 = 00000000414761f8
r10 = 0000000041476028 r11 = 0000000000000202
r12 = 0000000000000034 r13 = 0000000041476f00
r14 = 00002aaaf44f49c0 r15 = 0000000000000000
cs = 0000000000000033 fs = 0000000600000000
gs = 0006000000000000
rip = 00002b312e3e1c4a flags = 0000000000000287
Loaded modules:
(* denotes the module causing the exception)
0000000000400000-000000000041303b /home/weblogic/jdk1.6/bin/java
00007fffd9bfd000-00007fffd9bfddb7 /home/weblogic/jdk1.6/bin/java
00000036c9600000-00000036c9615b4f /lib64/libpthread.so.0
00000036c8a00000-00000036c8a8122f /lib64/libm.so.6
00000036c9200000-00000036c9201f93 /lib64/libdl.so.2
00000036c8600000-00000036c874e1a7 /lib64/libc.so.6
00000036c8200000-00000036c821bbe7 /lib64/ld-linux-x86-64.so.2
00002b312e36e000-00002b312e59f16f */home/weblogic/jdk1.6/jre/lib/amd64/jrockit/libjvm.so
00000036c9a00000-00000036c9a06f5b /lib64/librt.so.1
00002aaaaaabd000-00002aaaaaac664b /lib64/libnss_files.so.2
00002aaaaacc8000-00002aaaaacd4337 /home/weblogic/jdk1.6/jre/lib/amd64/libverify.so
00002aaaaadd7000-00002aaaaadff16b /home/weblogic/jdk1.6/jre/lib/amd64/libjava.so
00000036cca00000-00000036cca14107 /lib64/libnsl.so.1
00002aaaeaf96000-00002aaaeaf9c65f /home/weblogic/jdk1.6/jre/lib/amd64/native_threads/libhpi.so
00002aaaee787000-00002aaaee7949cb /home/weblogic/jdk1.6/jre/lib/amd64/libzip.so
00002aaaee90f000-00002aaaee91449b /home/weblogic/jdk1.6/jre/lib/amd64/libmanagement.so
00002aaaeea16000-00002aaaeea28547 /home/weblogic/jdk1.6/jre/lib/amd64/libnet.so
00002aaaeeb2d000-00002aaaeeb3384b /home/weblogic/jdk1.6/jre/lib/amd64/libnio.so
00002aaaeec75000-00002aaaeec7d63f /home/weblogic/jdk1.6/jre/lib/amd64/libjmapi.so
00002aaaeeddf000-00002aaaeede12af /home/weblogic/bea/wlserver_10.3/server/native/linux/x86_64/libwlfileio2.so
00002aaaef44c000-00002aaaef4dd833 /home/weblogic/jdk1.6/jre/lib/amd64/libawt.so
00002aaaef61b000-00002aaaef61f99f /home/weblogic/jdk1.6/jre/lib/amd64/headless/libmawt.so
00002aaaef721000-00002aaaef79eb57 /home/weblogic/jdk1.6/jre/lib/amd64/libfontmanager.so
00002aaafc000000-00002aaafc01514f /home/weblogic/jdk1.6/jre/lib/amd64/libdcpr.so
00002aaaef8c5000-00002aaaef8df5fb /usr/lib64/gconv/GBK.so
Stack:
(* marks the word pointed to by the stack pointer)
0000000041476ec0: 0000000041476ef0* 00002b312e54ee4a 0000000000000000 00002aaaf44f4e00
0000000041476ee0: 0000000000000000 0000000000000000 0000000041476fd0 00002b312e54eee5
0000000041476f00: 0000003000000010 0000000041476fe0 0000000041476f20 00002b312e4cc4ef
0000000041476f20: 0000000000000a78 0000002100000001 0000000000000000 0000000000000000
0000000041476f40: 0000000000000058 0101010101010101 00002aaaf44f4e00 0000000000000000
0000000041476f60: 0000000041476f90 00002b312e4cccfe 00002aaaf44f4e00 00002aaaf44f49c0
Code:
(* marks the word pointed to by the instruction pointer)
00002b312e3e1be8: 28d6058b48d18948 486408508b480038 ffffffc0c748128b 42a615b10f48f0ff
00002b312e3e1c08: 1174fff88348002c b256e80000ea60bf eb0000003ebf0015 4800396d693d8939
00002b312e3e1c28: bef289481474f685 853d8d4800000200 0016c051e8002c42 0001002c447605c7
00002b312e3e1c48: 0000002504c70000* 003fbf0000126700 550016d181e80000 8148535441e58948
00002b312e3e1c68: fb894800000100ec 0004b9fcd07d8d48 f300000000b80000 8d4ca0558d48ab48
00002b312e3e1c88: 0000002404c7d065 4c00000000b94100 8d480018858b058d e6894cffffff0c8d
"[ACTIVE] ExecuteThread: '14' fo" id=255 idx=0x3f4 tid=3098 lastJavaFrame=0x41477198
Stack 0: start=0x4143a000, end=0x4147e000, guards=0x4143f000 (ok), forbidden=0x4143d000
Thread Stack Trace:
at dumpForceDump+102()@0x2b312e3e1c4a
at vmFatalErrorMsg+0()@0x2b312e54ee4a
at vmFatalError+0()@0x2b312e54eee5
at jniPinObject+224()@0x2b312e4494e2
at jniGetPrimitiveArrayCriticalInfo+67()@0x2b312e4325a7
at jniGetPrimitiveArrayCritical+27()@0x2b312e4325fd
at jniStringFromUTF82+84()@0x2b312e449c60
at jniStringFromIString2+35()@0x2b312e44a113
at jmgmtNewStackTraceElem+181()@0x2b312e42c18d
at jniGetStackTraceElement+238()@0x2b312e43ea63
at JVM_GetStackTraceElement+9()@0x2b312e454fe3
at Java_java_lang_Throwable_getStackTraceElement+9()@0x2aaaaadec439
-- Java stack --
at java/lang/Throwable.getStackTraceElement(I)Ljava/lang/StackTraceElement;(Native Method)
at java/lang/Throwable.getOurStackTrace(Throwable.java:591)[optimized]
^-- Holding lock: java/lang/Throwable@0x4a4ee3a0[biased lock]
at java/lang/Throwable.printStackTrace(Throwable.java:510)[inlined]
at org/apache/log4j/spi/LocationInfo.<init>(LocationInfo.java:113)[inlined]
at org/apache/log4j/spi/LoggingEvent.getLocationInformation(LoggingEvent.java:247)[inlined]
at org/apache/log4j/helpers/PatternParser$LocationPatternConverter.convert(PatternParser.java:483)[optimized]
^-- Holding lock: java/io/PrintWriter@0x428290c8[thin lock]
^-- Holding lock: java/io/StringWriter@0x428290a0[thin lock]
at org/apache/log4j/helpers/PatternConverter.format(PatternConverter.java:65)[optimized]
at org/apache/log4j/PatternLayout.format(PatternLayout.java:502)[optimized]
at org/apache/log4j/WriterAppender.subAppend(WriterAppender.java:302)[inlined]
at org/apache/log4j/RollingFileAppender.subAppend(RollingFileAppender.java:263)[optimized]
at org/apache/log4j/WriterAppender.append(WriterAppender.java:160)[inlined]
at org/apache/log4j/AppenderSkeleton.doAppend(AppenderSkeleton.java:251)[optimized]
^-- Holding lock: org/apache/log4j/RollingFileAppender@0x4286b060[thin lock]
at org/apache/log4j/helpers/AppenderAttachableImpl.appendLoopOnAppenders(AppenderAttachableImpl.java:66)[inlined]
at org/apache/log4j/Category.callAppenders(Category.java:206)[optimized]
^-- Holding lock: org/apache/log4j/spi/RootLogger@0x42898688[thin lock]
at org/apache/log4j/Category.forcedLog(Category.java:391)[inlined]
at org/apache/log4j/Category.log(Category.java:856)[inlined]
at org/apache/commons/logging/impl/Log4JLogger.info(Log4JLogger.java:199)[optimized]
at com/ytec/bi/usep/common/socket/CommandSocket.close(CommandSocket.java:95)[optimized]
at com/ytec/bi/usep/common/socket/CommandClient.close(CommandClient.java:141)
at com/ytec/bi/usep/common/socket/WFTCommandClient.close(WFTCommandClient.java:108)
at com/ytec/bi/usep/common/util/WftCMD.sendCommand(WftCMD.java:229)[optimized]
at com/ytec/bi/usep/common/util/WftCMD.sendRcmdCommand(WftCMD.java:182)[inlined]
at com/ytec/bi/usep/monitor/ucc/impl/TaskMonitorUCCImpl.getTaskLogMsg(TaskMonitorUCCImpl.java:697)[optimized]
at sun/reflect/GeneratedMethodAccessor3834.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;(Unknown Source)[optimized]
at sun/reflect/DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)[optimized]
at java/lang/reflect/Method.invoke(Method.java:597)[inlined]
at org/springframework/aop/support/AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)[inlined]
at org/springframework/aop/framework/ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)[optimized]
at org/springframework/aop/framework/ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)[optimized]
at org/springframework/transaction/interceptor/TransactionInterceptor.invoke(TransactionInterceptor.java:106)[optimized]
at org/springframework/aop/framework/ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)[optimized]
at org/springframework/aop/interceptor/ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)[optimized]
at org/springframework/aop/framework/ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)[optimized]
at org/springframework/aop/framework/JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)[optimized]
at $Proxy182.getTaskLogMsg(Lja at com/ytec/bi/usep/monitor/web/TaskMonitorFacade.getActionInfoOfTaskRun(TaskMonitorFacade.java:163)[inlined]
va/lang/String;Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;)Ljava/lang/String;(Unknown Source)
at sun/reflect/GeneratedMethodAccessor2164.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;(Unknown Source)[optimized]
at sun/reflect/DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)[optimized]
at java/lang/reflect/Method.invoke(Method.java:597)[optimized]
at flex/messaging/services/remoting/adapters/JavaAdapter.invoke(JavaAdapter.java:421)[optimized]
at flex/messaging/services/RemotingService.serviceMessage(RemotingService.java:183)[optimized]
at flex/messaging/MessageBroker.routeMessageToService(MessageBroker.java:1503)[optimized]
at flex/messaging/endpoints/AbstractEndpoint.serviceMessage(AbstractEndpoint.java:884)[optimized]
at flex/messaging/endpoints/AbstractEndpoint$$FastClassByCGLIB$$1a3ef066.invoke(ILjava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;(<generated>)[optimized]
at net/sf/cglib/proxy/MethodProxy.invoke(MethodProxy.java:191)[optimized]
at org/springframework/aop/framework/Cglib2AopProxy$CglibMethodInvocation.invokeJoinpoint(Cglib2AopProxy.java:700)
at org/springframework/aop/framework/ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)[optimized]
at org/springframework/flex/core/MessageInterceptionAdvice.invoke(MessageInterceptionAdvice.java:59)[optimized]
at org/springframework/aop/framework/ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)[optimized]
at org/springframework/aop/framework/adapter/ThrowsAdviceInterceptor.invoke(ThrowsAdviceInterceptor.java:126)[optimized]
at org/springframework/aop/framework/ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)[optimized]
at org/springframework/aop/framework/Cglib2AopProxy$FixedChainStaticTargetInterceptor.intercept(Cglib2AopProxy.java:582)
at flex/messaging/endpoints/AMFEndpoint$$EnhancerByCGLIB$$4fb30719.serviceMessage(Lflex/messaging/messages/Message;)Lflex/messaging/messages/Message;(<generated>)[optimized]
at flex/messaging/endpoints/amf/MessageBrokerFilter.invoke(MessageBrokerFilter.java:121)[optimized]
at flex/messaging/endpoints/amf/LegacyFilter.invoke(LegacyFilter.java:158)[optimized]
at flex/messaging/endpoints/amf/SessionFilter.invoke(SessionFilter.java:44)[optimized]
at flex/messaging/endpoints/amf/BatchProcessFilter.invoke(BatchProcessFilter.java:67)[optimized]
at flex/messaging/endpoints/amf/SerializationFilter.invoke(SerializationFilter.java:146)[optimized]
at flex/messaging/endpoints/BaseHTTPEndpoint.service(BaseHTTPEndpoint.java:278)[optimized]
at flex/messaging/endpoints/AMFEndpoint$$EnhancerByCGLIB$$4fb30719.service(Ljavax/servlet/http/HttpServletRequest;Ljavax/servlet/http/HttpServletResponse;)V(<generated>)[optimized]
at org/springframework/flex/servlet/MessageBrokerHandlerAdapter.handle(MessageBrokerHandlerAdapter.java:101)[optimized]
at org/springframework/web/servlet/DispatcherServlet.doDispatch(DispatcherServlet.java:875)[optimized]
at org/springframework/web/servlet/DispatcherServlet.doService(DispatcherServlet.java:807)[optimized]
at org/springframework/web/servlet/FrameworkServlet.processRequest(FrameworkServlet.java:571)[inlined]
at org/springframework/web/servlet/FrameworkServlet.doPost(FrameworkServlet.java:511)[optimized]
at javax/servlet/http/HttpServlet.service(HttpServlet.java:727)[optimized]
at javax/servlet/http/HttpServlet.service(HttpServlet.java:820)[optimized]
at weblogic/servlet/internal/StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)[optimized]
at weblogic/servlet/internal/StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)[inlined]
at weblogic/servlet/internal/ServletStubImpl.execute(ServletStubImpl.java:292)[optimized]
at weblogic/servlet/internal/TailFilter.doFilter(TailFilter.java:26)[optimized]
at weblogic/servlet/internal/FilterChainImpl.doFilter(FilterChainImpl.java:42)[optimized]
at org/springframework/security/util/FilterChainProxy$VirtualFilterChain.doFilter(FilterChainProxy.java:378)[optimized]
at org/springframework/security/intercept/web/FilterSecurityInterceptor.invoke(FilterSecurityInterceptor.java:109)[inlined]
at org/springframework/security/intercept/web/FilterSecurityInterceptor.doFilter(FilterSecurityInterceptor.java:83)[optimized]
at org/springframework/security/util/FilterChainProxy$VirtualFilterChain.doFilter(FilterChainProxy.java:390)[optimized]
at org/springframework/security/ui/SessionFixationProtectionFilter.doFilterHttp(SessionFixationProtectionFilter.java:67)[optimized]
at org/springframework/security/ui/SpringSecurityFilter.doFilter(SpringSecurityFilter.java:53)[optimized]
at org/springframework/security/util/FilterChainProxy$VirtualFilterChain.doFilter(FilterChainProxy.java:390)[optimized]
at org/springframework/security/ui/ExceptionTranslationFilter.doFilterHttp(ExceptionTranslationFilter.java:101)[optimized]
at org/springframework/security/ui/SpringSecurityFilter.doFilter(SpringSecurityFilter.java:53)[optimized]
at org/springframework/security/util/FilterChainProxy$VirtualFilterChain.doFilter(FilterChainProxy.java:390)[optimized]
at org/springframework/security/providers/anonymous/AnonymousProcessingFilter.doFilterHttp(AnonymousProcessingFilter.java:105)[optimized]
at org/springframework/security/ui/SpringSecurityFilter.doFilter(SpringSecurityFilter.java:53)[optimized]
at org/springframework/security/util/FilterChainProxy$VirtualFilterChain.doFilter(FilterChainProxy.java:390)[optimized]
at org/springframework/security/wrapper/SecurityContextHolderAwareRequestFilter.doFilterHttp(SecurityContextHolderAwareRequestFilter.java:91)[optimized]
at org/springframework/security/ui/SpringSecurityFilter.doFilter(SpringSecurityFilter.java:53)[optimized]
at org/springframework/security/util/FilterChainProxy$VirtualFilterChain.doFilter(FilterChainProxy.java:390)[optimized]
at org/springframework/security/ui/AbstractProcessingFilter.doFilterHttp(AbstractProcessingFilter.java:278)[optimized]
at org/springframework/security/ui/SpringSecurityFilter.doFilter(SpringSecurityFilter.java:53)[optimized]
at org/springframework/security/util/FilterChainProxy$VirtualFilterChain.doFilter(FilterChainProxy.java:390)[optimized]
at org/springframework/security/ui/logout/LogoutFilter.doFilterHttp(LogoutFilter.java:89)[optimized]
at org/springframework/security/ui/SpringSecurityFilter.doFilter(SpringSecurityFilter.java:53)[optimized]
at org/springframework/security/util/FilterChainProxy$VirtualFilterChain.doFilter(FilterChainProxy.java:390)[optimized]
at org/springframework/security/ui/logout/LogoutFilter.doFilterHttp(LogoutFilter.java:89)[optimized]
at org/springframework/security/ui/SpringSecurityFilter.doFilter(SpringSecurityFilter.java:53)[optimized]
at org/springframework/security/util/FilterChainProxy$VirtualFilterChain.doFilter(FilterChainProxy.java:390)[optimized]
at org/springframework/security/context/HttpSessionContextIntegrationFilter.doFilterHttp(HttpSessionContextIntegrationFilter.java:235)[optimized]
at org/springframework/security/ui/SpringSecurityFilter.doFilter(SpringSecurityFilter.java:53)[optimized]
at org/springframework/security/util/FilterChainProxy$VirtualFilterChain.doFilter(FilterChainProxy.java:390)[optimized]
at org/springframework/security/concurrent/ConcurrentSessionFilter.doFilterHttp(ConcurrentSessionFilter.java:99)[optimized]
at org/springframework/security/ui/SpringSecurityFilter.doFilter(SpringSecurityFilter.java:53)[optimized]
at org/springframework/security/util/FilterChainProxy$VirtualFilterChain.doFilter(FilterChainProxy.java:390)[optimized]
at org/springframework/security/util/FilterChainProxy.doFilter(FilterChainProxy.java:175)[optimized]
at org/springframework/web/filter/DelegatingFilterProxy.invokeDelegate(DelegatingFilterProxy.java:236)[inlined]
at org/springframework/web/filter/DelegatingFilterProxy.doFilter(DelegatingFilterProxy.java:167)[optimized]
at weblogic/servlet/internal/FilterChainImpl.doFilter(FilterChainImpl.java:42)[inlined]
at weblogic/servlet/internal/WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3496)[optimized]
at weblogic/security/acl/internal/AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)[optimized]
at weblogic/security/service/SecurityManager.runAs(Lweblogic/security/acl/internal/AuthenticatedSubject;Lweblogic/security/acl/internal/AuthenticatedSubject;Ljava/security/PrivilegedAction;)Ljava/lang/Object;(Unknown Source)[inlined]
at weblogic/servlet/internal/WebAppServletContext.securedExecute(WebAppServletContext.java:2180)[inlined]
at weblogic/servlet/internal/WebAppServletContext.execute(WebAppServletContext.java:2086)[optimized]
at weblogic/servlet/internal/ServletRequestImpl.run(ServletRequestImpl.java:1406)[optimized]
at weblogic/work/ExecuteThread.execute(ExecuteThread.java:201)[inlined]
at weblogic/work/ExecuteThread.run(ExecuteThread.java:173)[optimized]
at jrockit/vm/RNI.c2java(JJJJJ)V(Native Method)
-- end of trace
Extended, platform specific info:
libc release: 2.5-stable
Elf headers:
libc ehdrs: EI: 7f454c46020101000000000000000000 ET: 3 EM: 62 V: 1 ENTRY: 00000036c861da90 PHOFF: 0000000000000040 SHOFF: 00000000001a3498 EF: 0x0 HS: 64 PS: 56 PHN; 10 SS: 64 SHN: 77 STIDX: 76
libpthread ehdrs: EI: 7f454c46020101000000000000000000 ET: 3 EM: 62 V: 1 ENTRY: 00000036c96057e0 PHOFF: 0000000000000040 SHOFF: 0000000000023010 EF: 0x0 HS: 64 PS: 56 PHN; 9 SS: 64 SHN: 39 STIDX: 38
libjvm ehdrs: EI: 7f454c46020101000000000000000000 ET: 3 EM: 62 V: 1 ENTRY: 000000000002def0 PHOFF: 0000000000000040 SHOFF: 0000000002530a18 EF: 0x0 HS: 64 PS: 56 PHN; 3 SS: 64 SHN: 30 STIDX: 27
* If you see this dump, please go to *
* http://edocs.bea.com/jrockit/go2troubleshooting.html *
* for troubleshooting information. *
===== END DUMP ===============================================================[ERROR] JRockit Fatal Error: Unspecified error (52)
[ERROR] Broken use of pinObject
[JRockit] ERROR: The JVM has crashed. Writing crash information to /home/dedp/dedp_domain/jrockit.24865.dump.
===== BEGIN DUMP =============================================================
JRockit dump produced after 28 days, 05:19:03 on Sat May 11 19:39:09 2013
* If you see this dump, please go to *
* http://edocs.bea.com/jrockit/go2troubleshooting.html *
* for troubleshooting information. *
Additional information is available in:
/home/dedp/dedp_domain/jrockit.24865.dump
No snapshot file (core dump) will be created because core dumps have been
disabled. To enable core dumping, try "ulimit -c unlimited"
before starting JRockit again.
Error Message: Unspecified error [52]
Signal info : si_signo=11, si_code=1 si_addr=(nil)
Fatal Error : Broken use of pinObject
Version : BEA JRockit(R) R27.6.5-32_o-121899-1.6.0_14-20091001-2113-linux-x86_64
CPU : Intel (null) (HT) SSE SSE2 SSE3 SSSE3 SSE4.1 SSE4.2 Intel64
Number CPUs : 4
Tot Phys Mem : 16509575168 (15744 MB)
OS version : Red Hat Enterprise Linux Server release 5.8 (Tikanga)
Linux version 2.6.18-308.el5 ([email protected]) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-50)) #1 SMP Fri Jan 27 17:17:51 EST 2012 (x86_64)
Thread System: NPTL
Java locking : Lazy unlocking enabled (class banning) (transfer banning)
State : JVM is running
Command Line : -server -Xms512m -Xmx1024m -XX:MaxPermSize=128m -da -Dplatform.home=/home/weblogic/bea/wlserver_10.3 -Dwls.home=/home/weblogic/bea/wlserver_10.3/server -Dweblogic.home=/home/weblogic/bea/wlserver_10.3/server -Dweblogic.management.discover=true -Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=/home/weblogic/bea/patch_wls1030/profiles/default/sysext_manifest_classpath:/home/weblogic/bea/patch_cie660/profiles/default/sysext_manifest_classpath -Duser.country=US -Duser.language=en -Dweblogic.Name=AdminServer -Djava.security.policy=/home/weblogic/bea/wlserver_10.3/server/lib/weblogic.policy -Dsun.java.launcher=SUN_STANDARD weblogic.Server
java.home : /home/weblogic/jdk1.6/jre
j.class.path : :/home/weblogic/bea/patch_wls1030/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/home/weblogic/bea/patch_cie660/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/home/weblogic/jdk1.6/lib/tools.jar:/home/weblogic/bea/wlserver_10.3/server/lib/weblogic_sp.jar:/home/weblogic/bea/wlserver_10.3/server/lib/weblogic.jar:/home/weblogic/bea/modules/features/weblogic.server.modules_10.3.0.0.jar:/home/weblogic/bea/wlserver_10.3/server/lib/webservices.jar:/home/weblogic/bea/modules/org.apache.ant_1.6.5/lib/ant-all.jar:/home/weblogic/bea/modules/net.sf.antcontrib_1.0.0.0_1-0b2/lib/ant-contrib.jar::/home/weblogic/bea/wlserver_10.3/common/eval/pointbase/lib/pbclient57.jar:/home/weblogic/bea/wlserver_10.3/server/lib/xqrl.jar::
j.lib.path : /home/weblogic/jdk1.6/jre/lib/amd64/jrockit:/home/weblogic/jdk1.6/jre/lib/amd64:/home/weblogic/jdk1.6/jre/../lib/amd64::/home/oracle/db/product/11.2.0/client/lib:/home/oracle/db/product/11.2.0/client/rdbms/lib:/lib:/usr/lib:/home/weblogic/bea/wlserver_10.3/server/native/linux/x86_64:/home/weblogic/bea/wlserver_10.3/server/native/linux/x86_64/oci920_8
JAVA_HOME : /home/weblogic/jdk1.6
JAVAOPTIONS: <not set>
LD_LIBRARY_PATH: /home/weblogic/jdk1.6/jre/lib/amd64/jrockit:/home/weblogic/jdk1.6/jre/lib/amd64:/home/weblogic/jdk1.6/jre/../lib/amd64::/home/oracle/db/product/11.2.0/client/lib:/home/oracle/db/product/11.2.0/client/rdbms/lib:/lib:/usr/lib:/home/weblogic/bea/wlserver_10.3/server/native/linux/x86_64:/home/weblogic/bea/wlserver_10.3/server/native/linux/x86_64/oci920_8
LD_PRELOAD : <not set>
LD_ASSUME_KERNEL: <not set>
StackOverFlow: 20 StackOverFlowErrors have occured
OutOfMemory : 0 OutOfMemoryErrors have occured
C Heap : Good; no memory allocations have failed
GC Strategy : Mode: throughput. Currently using strategy: singleparpar
GC Status : OC is not running. Last finished OC was OC#1080.
: YC is not running. Last finished YC was YC#5587.
OC History : Strategy singleparpar was used for OC#1053.
: Strategy genparpar was used for OC#1054 to OC#1075.
: Strategy singleparpar was used for OC#1076.
: Strategy genparpar was used for OC#1077 to OC#1078.
: Strategy singleparpar was used for OC#1079 to OC#1080.
YC History : Ran 0 YCs before OC#1076.
: Ran 6 YCs before OC#1077.
: Ran 0 YCs before OC#1078.
: Ran 0 YCs before OC#1079.
: Ran 0 YCs before OC#1080.
: Ran 0 YCs since last OC.
YC Promotion : Last YC successfully promoted all objects
Heap : 0x42800000 - 0x62800000 (Size: 512 MB)
Compaction : 0x48800000 - 0x4a800000 (Current compaction type: external)
CompRefs : References are compressed, with heap base 0x0.
Registers (from ThreadContext: 0x414769c0 / OS context: 0x41476a80):
rax = 0000000000000017 rcx = 0000000041476d40
rdx = 00000000ffffffff rbx = 00002b312e576b94
rsp = 0000000041476ec0 rbp = 0000000041476ec0
rsi = 00002b312e576bab rdi = 00002b312e6a5ed7
r8 = 7463656a624f6e69 r9 = 00000000414761f8
r10 = 0000000041476028 r11 = 0000000000000202
r12 = 0000000000000034 r13 = 0000000041476f00
r14 = 00002aaaf44f49c0 r15 = 0000000000000000
cs = 0000000000000033 fs = 0000000600000000
gs = 0006000000000000
rip = 00002b312e3e1c4a flags = 0000000000000287
Loaded modules:
(* denotes the module causing the exception)
0000000000400000-000000000041303b /home/weblogic/jdk1.6/bin/java
00007fffd9bfd000-00007fffd9bfddb7 /home/weblogic/jdk1.6/bin/java
00000036c9600000-00000036c9615b4f /lib64/libpthread.so.0
00000036c8a00000-00000036c8a8122f /lib64/libm.so.6
00000036c9200000-00000036c9201f93 /lib64/libdl.so.2
00000036c8600000-00000036c874e1a7 /lib64/libc.so.6
00000036c8200000-00000036c821bbe7 /lib64/ld-linux-x86-64.so.2
00002b312e36e000-00002b312e59f16f */home/weblogic/jdk1.6/jre/lib/amd64/jrockit/libjvm.so
00000036c9a00000-00000036c9a06f5b /lib64/librt.so.1
00002aaaaaabd000-00002aaaaaac664b /lib64/libnss_files.so.2
00002aaaaacc8000-00002aaaaacd4337 /home/weblogic/jdk1.6/jre/lib/amd64/libverify.so
00002aaaaadd7000-00002aaaaadff16b /home/weblogic/jdk1.6/jre/lib/amd64/libjava.so
00000036cca00000-00000036cca14107 /lib64/libnsl.so.1
00002aaaeaf96000-00002aaaeaf9c65f /home/weblogic/jdk1.6/jre/lib/amd64/native_threads/libhpi.so
00002aaaee787000-00002aaaee7949cb /home/weblogic/jdk1.6/jre/lib/amd64/libzip.so
00002aaaee90f000-00002aaaee91449b /home/weblogic/jdk1.6/jre/lib/amd64/libmanagement.so
00002aaaeea16000-00002aaaeea28547 /home/weblogic/jdk1.6/jre/lib/amd64/libnet.so
00002aaaeeb2d000-00002aaaeeb3384b /home/weblogic/jdk1.6/jre/lib/amd64/libnio.so
00002aaaeec75000-00002aaaeec7d63f /home/weblogic/jdk1.6/jre/lib/amd64/libjmapi.so
00002aaaeeddf000-00002aaaeede12af /home/weblogic/bea/wlserver_10.3/server/native/linux/x86_64/libwlfileio2.so
00002aaaef44c000-00002aaaef4dd833 /home/weblogic/jdk1.6/jre/lib/amd64/libawt.so
00002aaaef61b000-00002aaaef61f99f /home/weblogic/jdk1.6/jre/lib/amd64/headless/libmawt.so
00002aaaef721000-00002aaaef79eb57 /home/weblogic/jdk1.6/jre/lib/amd64/libfontmanager.so
00002aaafc000000-00002aaafc01514f /home/weblogic/jdk1.6/jre/lib/amd64/libdcpr.so
00002aaaef8c5000-00002aaaef8df5fb /usr/lib64/gconv/GBK.so
Stack:
(* marks the word pointed to by the stack pointer)
0000000041476ec0: 0000000041476ef0* 00002b312e54ee4a 0000000000000000 00002aaaf44f4e00
0000000041476ee0: 0000000000000000 0000000000000000 0000000041476fd0 00002b312e54eee5
0000000041476f00: 0000003000000010 0000000041476fe0 0000000041476f20 00002b312e4cc4ef
0000000041476f20: 0000000000000a78 0000002100000001 0000000000000000 0000000000000000
0000000041476f40: 0000000000000058 0101010101010101 00002aaaf44f4e00 0000000000000000
0000000041476f60: 0000000041476f90 00002b312e4cccfe 00002aaaf44f4e00 00002aaaf44f49c0
Code:
(* marks the word pointed to by the instruction pointer)
00002b312e3e1be8: 28d6058b48d18948 486408508b480038 ffffffc0c748128b 42a615b10f48f0ff
00002b312e3e1c08: 1174fff88348002c b256e80000ea60bf eb0000003ebf0015 4800396d693d8939
00002b312e3e1c28: bef289481474f685 853d8d4800000200 0016c051e8002c42 0001002c447605c7
00002b312e3e1c48: 0000002504c70000* 003fbf0000126700 550016d181e80000 8148535441e58948
00002b312e3e1c68: fb894800000100ec 0004b9fcd07d8d48 f300000000b80000 8d4ca0558d48ab48
00002b312e3e1c88: 0000002404c7d065 4c00000000b94100 8d480018858b058d e6894cffffff0c8d
"[ACTIVE] ExecuteThread: '14' fo" id=255 idx=0x3f4 tid=3098 lastJavaFrame=0x41477198
Stack 0: start=0x4143a000, end=0x4147e000, guards=0x4143f000 (ok), forbidden=0x4143d000
Thread Stack Trace:
at dumpForceDump+102()@0x2b312e3e1c4a
at vmFatalErrorMsg+0()@0x2b312e54ee4a
at vmFatalError+0()@0x2b312e54eee5
at jniPinObject+224()@0x2b312e4494e2
at jniGetPrimitiveArrayCriticalInfo+67()@0x2b312e4325a7
at jniGetPrimitiveArrayCritical+27()@0x2b312e4325fd
at jniStringFromUTF82+84()@0x2b312e449c60
at jniStringFromIString2+35()@0x2b312e44a113
at jmgmtNewStackTraceElem+181()@0x2b312e42c18d
at jniGetStackTraceElement+238()@0x2b312e43ea63
at JVM_GetStackTraceElement+9()@0x2b312e454fe3
at Java_java_lang_Throwable_getStackTraceElement+9()@0x2aaaaadec439
-- Java stack --
at java/lang/Throwable.getStackTraceElement(I)Ljava/lang/StackTraceElement;(Native Method)
at java/lang/Throwable.getOurStackTrace(Throwable.java:591)[optimized]
^-- Holding lock: java/lang/Throwable@0x4a4ee3a0[biased lock]
at java/lang/Throwable.printStackTrace(Throwable.java:510)[inlined]
at org/apache/log4j/spi/LocationInfo.<init>(LocationInfo.java:113)[inlined]
at org/apache/log4j/spi/LoggingEvent.getLocationInformation(LoggingEvent.java:247)[inlined]
at org/apache/log4j/helpers/PatternParser$LocationPatternConverter.convert(PatternParser.java:483)[optimized]
^-- Holding lock: java/io/PrintWriter@0x428290c8[thin lock]
^-- Holding lock: java/io/StringWriter@0x428290a0[thin lock]
at org/apache/log4j/helpers/PatternConverter.format(PatternConverter.java:65)[optimized]
at org/apache/log4j/PatternLayout.format(PatternLayout.java:502)[optimized]
at org/apache/log4j/WriterAppender.subAppend(WriterAppender.java:302)[inlined]
at org/apache/log4j/RollingFileAppender.subAppend(RollingFileAppender.java:263)[optimized]
at org/apache/log4j/WriterAppender.append(WriterAppender.java:160)[inlined]
at org/apache/log4j/AppenderSkeleton.doAppend(AppenderSkeleton.java:251)[optimized]
^-- Holding lock: org/apache/log4j/RollingFileAppender@0x4286b060[thin lock]
at org/apache/log4j/helpers/AppenderAttachableImpl.appendLoopOnAppenders(AppenderAttachableImpl.java:66)[inlined]
at org/apache/log4j/Category.callAppenders(Category.java:206)[optimized]
^-- Holding lock: org/apache/log4j/spi/RootLogger@0x42898688[thin lock]
at org/apache/log4j/Category.forcedLog(Category.java:391)[inlined]
at org/apache/log4j/Category.log(Category.java:856)[inlined]
at org/apache/commons/logging/impl/Log4JLogger.info(Log4JLogger.java:199)[optimized]
at com/ytec/bi/usep/common/socket/CommandSocket.close(CommandSocket.java:95)[optimized]
at com/ytec/bi/usep/common/socket/CommandClient.close(CommandClient.java:141)
at com/ytec/bi/usep/common/socket/WFTCommandClient.close(WFTCommandClient.java:108)
at com/ytec/bi/usep/common/util/WftCMD.sendCommand(WftCMD.java:229)[optimized]
at com/ytec/bi/usep/common/util/WftCMD.sendRcmdCommand(WftCMD.java:182)[inlined]
at com/ytec/bi/usep/monitor/ucc/impl/TaskMonitorUCCImpl.getTaskLogMsg(TaskMonitorUCCImpl.java:697)[optimized]
at sun/reflect/GeneratedMethodAccessor3834.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;(Unknown Source)[optimized]
at sun/reflect/DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)[optimized]
at java/lang/reflect/Method.invoke(Method.java:597)[inlined]
at org/springframework/aop/support/AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)[inlined]
at org/springframework/aop/framework/ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)[optimized]
at org/springframework/aop/framework/ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)[optimized]
at org/springframework/transaction/interceptor/TransactionInterceptor.invoke(TransactionInterceptor.java:106)[optimized]
at org/springframework/aop/framework/ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)[optimized]
at org/springframework/aop/interceptor/ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)[optimized]
at org/springframework/aop/framework/ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)[optimized]
at org/springframework/aop/framework/JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)[optimized]
at $Proxy182.getTaskLogMsg(Lja at com/ytec/bi/usep/monitor/web/TaskMonitorFacade.getActionInfoOfTaskRun(TaskMonitorFacade.java:163)[inlined]
va/lang/String;Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;)Ljava/lang/String;(Unknown Source)
at sun/reflect/GeneratedMethodAccessor2164.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;(Unknown Source)[optimized]
at sun/reflect/DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)[optimized]
at java/lang/reflect/Method.invoke(Method.java:597)[optimized]
at flex/messaging/services/remoting/adapters/JavaAdapter.invoke(JavaAdapter.java:421)[optimized]
at flex/messaging/services/RemotingService.serviceMessage(RemotingService.java:183)[optimized]
at flex/messaging/MessageBroker.routeMessageToService(MessageBroker.java:1503)[optimized]
at flex/messaging/endpoints/AbstractEndpoint.serviceMessage(AbstractEndpoint.java:884)[optimized]
at flex/messaging/endpoints/AbstractEndpoint$$FastClassByCGLIB$$1a3ef066.invoke(ILjava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;(<generated>)[optimized]
at net/sf/cglib/proxy/MethodProxy.invoke(MethodProxy.java:191)[optimized]
at org/springframework/aop/framework/Cglib2AopProxy$CglibMethodInvocation.invokeJoinpoint(Cglib2AopProxy.java:700)
at org/springframework/aop/framework/ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)[optimized]
at org/springframework/flex/core/MessageInterceptionAdvice.invoke(MessageInterceptionAdvice.java:59)[optimized]
at org/springframework/aop/framework/ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)[optimized]
at org/springframework/aop/framework/adapter/ThrowsAdviceInterceptor.invoke(ThrowsAdviceInterceptor.java:126)[optimized]
at org/springframework/aop/framework/ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)[optimized]
at org/springframework/aop/framework/Cglib2AopProxy$FixedChainStaticTargetInterceptor.intercept(Cglib2AopProxy.java:582)
at flex/messaging/endpoints/AMFEndpoint$$EnhancerByCGLIB$$4fb30719.serviceMessage(Lflex/messaging/messages/Message;)Lflex/messaging/messages/Message;(<generated>)[optimized]
at flex/messaging/endpoints/amf/MessageBrokerFilter.invoke(MessageBrokerFilter.java:121)[optimized]
at flex/messaging/endpoints/amf/LegacyFilter.invoke(LegacyFilter.java:158)[optimized]
at flex/messaging/endpoints/amf/SessionFilter.invoke(SessionFilter.java:44)[optimized]
at flex/messaging/endpoints/amf/BatchProcessFilter.invoke(BatchProcessFilter.java:67)[optimized]
at flex/messaging/endpoints/amf/SerializationFilter.invoke(SerializationFilter.java:146)[optimized]
at flex/messaging/endpoints/BaseHTTPEndpoint.service(BaseHTTPEndpoint.java:278)[optimized]
at flex/messaging/endpoints/AMFEndpoint$$EnhancerByCGLIB$$4fb30719.service(Ljavax/servlet/http/HttpServletRequest;Ljavax/servlet/http/HttpServletResponse;)V(<generated>)[optimized]
at org/springframework/flex/servlet/MessageBrokerHandlerAdapter.handle(MessageBrokerHandlerAdapter.java:101)[optimized]
at org/springframework/web/servlet/DispatcherServlet.doDispatch(DispatcherServlet.java:875)[optimized]
at org/springframework/web/servlet/DispatcherServlet.doService(DispatcherServlet.java:807)[optimized]
at org/springframework/web/servlet/FrameworkServlet.processRequest(FrameworkServlet.java:571)[inlined]
at org/springframework/web/servlet/FrameworkServlet.doPost(FrameworkServlet.java:511)[optimized]
at javax/servlet/http/HttpServlet.service(HttpServlet.java:727)[optimized]
at javax/servlet/http/HttpServlet.service(HttpServlet.java:820)[optimized]
at weblogic/servlet/internal/StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)[optimized]
at weblogic/servlet/internal/StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)[inlined]
at weblogic/servlet/internal/ServletStubImpl.execute(ServletStubImpl.java:292)[optimized]
at weblogic/servlet/internal/TailFilter.doFilter(TailFilter.java:26)[optimized]
at weblogic/servlet/internal/FilterChainImpl.doFilter(FilterChainImpl.java:42)[optimized]
at org/springframework/security/util/FilterChainProxy$VirtualFilterChain.doFilter(FilterChainProxy.java:378)[optimized]
at org/springframework/security/intercept/web/FilterSecurityInterceptor.invoke(FilterSecurityInterceptor.java:109)[inlined]
at org/springframework/security/intercept/web/FilterSecurityInterceptor.doFilter(FilterSecurityInterceptor.java:83)[optimized]
at org/springframework/security/util/FilterChainProxy$VirtualFilterChain.doFilter(FilterChainProxy.java:390)[optimized]
at org/springframework/security/ui/SessionFixationProtectionFilter.doFilterHttp(SessionFixationProtectionFilter.java:67)[optimized]
at org/springframework/security/ui/SpringSecurityFilter.doFilter(SpringSecurityFilter.java:53)[optimized]
at org/springframework/security/util/FilterChainProxy$VirtualFilterChain.doFilter(FilterChainProxy.java:390)[optimized]
at org/springframework/security/ui/ExceptionTranslationFilter.doFilterHttp(ExceptionTranslationFilter.java:101)[optimized]
at org/springframework/security/ui/SpringSecurityFilter.doFilter(SpringSecurityFilter.java:53)[optimized]
at org/springframework/security/util/FilterChainProxy$VirtualFilterChain.doFilter(FilterChainProxy.java:390)[optimized]
at org/springframework/security/providers/anonymous/AnonymousProcessingFilter.doFilterHttp(AnonymousProcessingFilter.java:105)[optimized]
at org/springframework/security/ui/SpringSecurityFilter.doFilter(SpringSecurityFilter.java:53)[optimized]
at org/springframework/security/util/FilterChainProxy$VirtualFilterChain.doFilter(FilterChainProxy.java:390)[optimized]
at org/springframework/security/wrapper/SecurityContextHolderAwareRequestFilter.doFilterHttp(SecurityContextHolderAwareRequestFilter.java:91)[optimized]
at org/springframework/security/ui/SpringSecurityFilter.doFilter(SpringSecurityFilter.java:53)[optimized]
at org/springframework/security/util/FilterChainProxy$VirtualFilterChain.doFilter(FilterChainProxy.java:390)[optimized]
at org/springframework/security/ui/AbstractProcessingFilter.doFilterHttp(AbstractProcessingFilter.java:278)[optimized]
at org/springframework/security/ui/SpringSecurityFilter.doFilter(SpringSecurityFilter.java:53)[optimized]
at org/springframework/security/util/FilterChainProxy$VirtualFilterChain.doFilter(FilterChainProxy.java:390)[optimized]
at org/springframework/security/ui/logout/LogoutFilter.doFilterHttp(LogoutFilter.java:89)[optimized]
at org/springframework/security/ui/SpringSecurityFilter.doFilter(SpringSecurityFilter.java:53)[optimized]
at org/springframework/security/util/FilterChainProxy$VirtualFilterChain.doFilter(FilterChainProxy.java:390)[optimized]
at org/springframework/security/ui/logout/LogoutFilter.doFilterHttp(LogoutFilter.java:89)[optimized]
at org/springframework/security/ui/SpringSecurityFilter.doFilter(SpringSecurityFilter.java:53)[optimized]
at org/springframework/security/util/FilterChainProxy$VirtualFilterChain.doFilter(FilterChainProxy.java:390)[optimized]
at org/springframework/security/context/HttpSessionContextIntegrationFilter.doFilterHttp(HttpSessionContextIntegrationFilter.java:235)[optimized]
at org/springframework/security/ui/SpringSecurityFilter.doFilter(SpringSecurityFilter.java:53)[optimized]
at org/springframework/security/util/FilterChainProxy$VirtualFilterChain.doFilter(FilterChainProxy.java:390)[optimized]
at org/springframework/security/concurrent/ConcurrentSessionFilter.doFilterHttp(ConcurrentSessionFilter.java:99)[optimized]
at org/springframework/security/ui/SpringSecurityFilter.doFilter(SpringSecurityFilter.java:53)[optimized]
at org/springframework/security/util/FilterChainProxy$VirtualFilterChain.doFilter(FilterChainProxy.java:390)[optimized]
at org/springframework/security/util/FilterChainProxy.doFilter(FilterChainProxy.java:175)[optimized]
at org/springframework/web/filter/DelegatingFilterProxy.invokeDelegate(DelegatingFilterProxy.java:236)[inlined]
at org/springframework/web/filter/DelegatingFilterProxy.doFilter(DelegatingFilterProxy.java:167)[optimized]
at weblogic/servlet/internal/FilterChainImpl.doFilter(FilterChainImpl.java:42)[inlined]
at weblogic/servlet/internal/WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3496)[optimized]
at weblogic/security/acl/internal/AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)[optimized]
at weblogic/security/service/SecurityManager.runAs(Lweblogic/security/acl/internal/AuthenticatedSubject;Lweblogic/security/acl/internal/AuthenticatedSubject;Ljava/security/PrivilegedAction;)Ljava/lang/Object;(Unknown Source)[inlined]
at weblogic/servlet/internal/WebAppServletContext.securedExecute(WebAppServletContext.java:2180)[inlined]
at weblogic/servlet/internal/WebAppServletContext.execute(WebAppServletContext.java:2086)[optimized]
at weblogic/servlet/internal/ServletRequestImpl.run(ServletRequestImpl.java:1406)[optimized]
at weblogic/work/ExecuteThread.execute(ExecuteThread.java:201)[inlined]
at weblogic/work/ExecuteThread.run(ExecuteThread.java:173)[optimized]
at jrockit/vm/RNI.c2java(JJJJJ)V(Native Method)
-- end of trace
Extended, platform specific info:
libc release: 2.5-stable
Elf headers:
libc ehdrs: EI: 7f454c46020101000000000000000000 ET: 3 EM: 62 V: 1 ENTRY: 00000036c861da90 PHOFF: 0000000000000040 SHOFF: 00000000001a3498 EF: 0x0 HS: 64 PS: 56 PHN; 10 SS: 64 SHN: 77 STIDX: 76
libpthread ehdrs: EI: 7f454c46020101000000000000000000 ET: 3 EM: 62 V: 1 ENTRY: 00000036c96057e0 PHOFF: 0000000000000040 SHOFF: 0000000000023010 EF: 0x0 HS: 64 PS: 56 PHN; 9 SS: 64 SHN: 39 STIDX: 38
libjvm ehdrs: EI: 7f454c46020101000000000000000000 ET: 3 EM: 62 V: 1 ENTRY: 000000000002def0 PHOFF: 0000000000000040 SHOFF: 0000000002530a18 EF: 0x0 HS: 64 PS: 56 PHN; 3 SS: 64 SHN: 30 STIDX: 27
* If you see this dump, please go to *
* http://edocs.bea.com/jrockit/go2troubleshooting.html *
* for troubleshooting information. *
===== END DUMP =============================================================== -
Windows Server 2008 R2 - Trial Version Activation Error
I downloaded a trial of Windows Server 2008 R2 a few months ago. I may have loaded the ISO onto another PC for testing, but the testing is no longer active. However, I am testing a new environment where I need to load Server 2008 R2 onto
2 different servers for testing, before I activate. I will be purchasing keys once my lab is fully functioning if needed. One Virtual Machine will be moved to a server which will be running Server 2012 R2 Datacenter in the future.
Back to the problem at hand. When I try to Activate my Server 2008 R2 copy to get 180 days trial started, it errors out with 0xC004F074. We don't use a KMS Server, and anything I can find seems to refer to this as an error. I just need
to activate a trial version.Hi,
Thanks for posting here.
Regarding the current issue, please understand this error code appears only during the time of activation when the Software Licensing Service reports that it cannot activate the product key
since the Key Management Service cannot be contacted. Please follow the steps below to activate the machine again to see if it works.
1) Open cmd(command prompt) with administrator rights
2) Type slmgr.vbs –ipk xxxxx-xxxxx-xxxxx-xxxxx-xxxxx (x should be replaced by your 25 digit product key)
3) Hit enter
4) Type slmgr.vbs –ato (This will change the product key)
5) Hit enter
For details, please refer to the following article.
Windows Server 2012 and Windows 8 - Activation Error 0xC004F074
http://www.petenetlive.com/KB/Article/0000766.htm
How to Fix Activation Error 0xC004F074 in Windows 8 and 8.1?
http://atechjourney.com/how-to-fix-activation-error-0xc004f074-in-windows-8.html/
Hope it helps.
Best Regards,
Andy Qi
Andy Qi
TechNet Community Support -
Verizon VZAccess Manager (for broadband modem) will not even Force Quit
When I wake my MacBook Pro and launch VZAccess Manager it often hangsand Force Quit will not work (I didn't know that was possible). The only way to shut down is to press and hold the power button.
With each successive release of 10.5 my USB 727 modem driven by the VZAccess software is getting more finicky. I'm now making sure to disconnect and quit VZAccess before the MacBook Pro Intel goes to sleep. Since 10.5.6 this happens multiple times per day. I'm using the latest available VZAccess software.
A workaround that I would like: before installing VZAccess I got the modem to work just using the OS X network panel (WWAN / Other / Verizon 1xEVDO Modem Script). But now I can't get that to work, even when I Uninstall VZAccess.
Does anyone know a way to undo the actions of VZAccess beyond what VZAccess Uninstall does? Does VZAccess overwrite the Verizon 1xEVDO Modem Script supplied by Apple, and fail restore it when using Uninstall?
BTW, I've not been able to send the error report to Apple, because I'm in a rural location and don't have another way to connect to the Internet to report.Contact Verizon. The problem is likely with their software not staying compatible. If they cannot provide a newer version of their software that is compatible then all you can do is downgrade to a previous version of Leopard with which their software worked. You can do that as follows:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update. -
VZAccess Manager for MiFi4510L?
I'm caught between a rock and a hard place. I can't get on My Verizon without them sending me a temp password in a text message. I have a MiFi4510L, not a phone. Customer Service says I need to use VZAccess Manager to be able to read the text message. I cannot find a version of VZAccess Manager that supports the 4510L.
Can anybody help?
Thanks.Hi John_Getzke, your MiFi device is activated with a wireless number to use our network just like a wireless phone. You wouldn't have known that unless you have a order receipt or bill. You can find the wireless number assigned by doing the following:
• While on WiFi, open an internet browser and go to http://192.168.1.1
• Enter your password in the login field (default is the password found on the back of device under the battery cover ).
• Click Advanced > Diagnostics and look for Phone No.
When you say trial, are you one of the trial users from the Google IO conference? If so, those lines are activated under a demo account for the trial purpose and you won't be able to complete My Verizon registration for your own login.
If you are trialing during the 14 day return period, you can register once you follow the steps above to get your wireless number and go to www.verizonwireless.com/myverizon
Either way, you can still monitor your data usage by calling 800-922-0204 or download VZ Access Manager at www.vzam.net -
VZaccess Manager changes WiFi connections to manually connect from automatic
VZaccess Manager changes WiFi connections to manually connect from automatic.
I have Panasonic CF-19s with VZaccess manager installed with a NDIS connection that automatically connects to Cellular service. I need my WiFI connections to also connect when available and have them set to automatically connect and managed by Windows (WiFi connection in accessmanager is set to None). When I first configure it, it works fine and we use Netmotion to decide which connection to use. After exiting VZaccess manager and restarting it, it changes my WiFi connections to "manually connect" even though accessmanager is not managing it. As soon as I exit out of Accessmanager the connections are changed back to "automatically connect". I need both connections to be active at the same time so the switchover to cellular is immediate when the WiFi connection is lost.Hi,
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Pr
oduction
With the Partitioning, OLAP and Data Mining options
Your instance is started from the 10g ORACLE_HOME. You mentioned you started it from the 11g ORACLE_HOME but it's not the case.
Here is an example with a 10gR2 database started from a 11gR2 ORACLE_HOME :
SQL> startup upgrade pfile =/u01/app/oracle/product/10.2.0/db_1/dbs/initP102.ora
ORA-32006: BACKGROUND_DUMP_DEST initialization parameter has been deprecated
ORA-32006: USER_DUMP_DEST initialization parameter has been deprecated
ORACLE instance started.
Total System Global Area 167387136 bytes
Fixed Size 1335248 bytes
Variable Size 88080432 bytes
Database Buffers 75497472 bytes
Redo Buffers 2473984 bytes
Database mounted.
Database opened.
SQL> exit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing optionsNotice the Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 part.
In your case it was Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.3.0
To solve the issue follow the official documentation, you have specific actions with oradim etc. to do (it's always a bit more complicated than with Unix/Linux but it's documented) :
http://download.oracle.com/docs/cd/B28359_01/server.111/b28300/upgrade.htm#insertedID8
Best regards
Phil -
VZaccess Manager changes local network address
I would like to know why VZAccess Manager changes my local network IP address everytime it is installed or there is a program update. My LAN is on 10.0.0.- and VZAccess manager is installed on one computer on the network but every time I've had to re-install or there is a program update it sets the IP address for that computers LAN address to 192.168.-.- and I have to go back in and reset the network address to the proper settings for my network. This is a USB modem acquiring its own address from the Verizon network. Why is it mucking around in my LAN settings? It functions the same on the computer it is installed on no matter what my LAN is on so there is no reason for it to be altering these settings.
I'll give you an explanation of my network configuration and my opinion of the situation and VZ Access Manager and we can go from there.
I have an office in the lower leval of my home with my PC, my laptop and a NAS (an old PIII @1Ghz running FreeNAS to turn it into a Network Attached Storage). PC and NAS and usually the laptop are connected to a switch (their LAnto the switch w/CAT5. The switch is CAT5 to an Ensoniq CB3 for a wireless connection to a Hawkings wireless router w/ a 6.5 db external antenna that is located in the spare room upstairs where the computer my wife uses (on occasion) is also located. The Hawking is connected to the LAN on my wifes computer, connection sharing is set up on that computer too and the Verizon Novatel USB760 is attached to this computer through a USB port. VZ Access Manager is installed on her computer also. I can take control of her computer from downstairs using TeamViewer. The 3 computers and the NAS are on their own workgroup (renamed from 'WORKGROUP' and are also set up using 10.0.0.100, 10.0.0.101, 10.0.0.102 and the NAS is 10.0.0.150.
Everything works perfectly until VZ Access Manager is installed or upgraded at which time it changes the address of my wifes computer (that it's connected to USB to 192.168.1.1, 255.255.255.0, no default gateway or DNS server address which stops my network from working. The USB760/VZ Access Manager have acquired an IP address, mask, gateway and DNS from Verizon and they can be found in VZ Access Manager. It doesn't assign a valid address to the computer it's plugged into.
This is the point where I have to go in and reset that LAN to 10.0.0.100, 255.255.255.0, 10.0.0.10 and I use OpenDNS for all 4 units (and I change VZ Access Manager's DNS to OpenDNS' 208.67.222.222 and 208.67.220.220) and everything works fine until VZ Access manager comes along with another upgrade. My download speeds from any unit run a pretty consistant 680K to 1.3G with everything set as I've explained above.
Now, the USB760 and VZ Access Manager have acquired their address as they should have. There is no reason for the program to go in and alter the settings on that machines LAN because 1) they were already set 2) VZAM is not assigning a working address to that machine anyway, just a generic 192.168 address and wiping the gateway address and the DNS addresses that were in there and not even replacing them and not setting them to 'Acquire an address automatically'.
VZAM and the USB760 would function on this computer even if I pulled the LAN card out altogether so my opinion is that this is a software glitch or a programming error in VZAM that I have had to fix 5 times now (3 program updates and twice to humor tech support when they wouldn't believe me that the problem I was having originated on their end).
This is basically an annoyance and I am extremely glad that VZAM isn't smart enough to be able to access the whole network and change all the settings but I sure would like to see it fixed before someone changes the code in a future update and it allows VZAM to run amok all the way through my LAN network.
Heheheh, it might not stop at the end of my network.....and the whole world will be reset to 192.168.1.1....even the MACs and the Smartphones.
Have Fun
Mike -
Error while using P2V in Oracle VM 2.2 version
Error while using P2V in Oracle VM 2.2 version
I tried using this option by using the steps given on one link but it didnt worked...
Error:
code 404, message No permission to list directory.
I ve tried giving full permissions on for /OVS on Server but invain.
Can U pls help me...
Thanks in advance.
Edited by: user10310678 on Sep 16, 2009 3:32 AMuser10310678 wrote:
I am using beta version. Oracle VM Manager 2.2.0If you have a beta version of 2.2, then you should be an Oracle employee. Please ask this question on an internal mailing list. If you are not an Oracle employee, please ask the employee that gave you this beta. As this is a beta, some functionality may not be operational yet, so I can't answer why this particular feature seems not to work.
Maybe you are looking for
-
Is it possible to add a Filmratings like PG or R using template made in FCP
I want to know if FCP has a prebuilt film ratings template we can use?
-
I have tried everything that I can think of to fix it from troubleshooting to restoring firefox to defaults. The problem didn't occur until after I changed the toolbar skin with a skin from this site. I can't seem to find a way to change the skin bac
-
My Itunes Lp was working fine. After buying Mika's new album it opened perfectly and worked fine. But after updating from itunes 9 to itunes 9.0.1 it no longer opens properly. It just cause itunes to open up a blank screen and I don't know why. If an
-
Measuring Point in Maintenance Plan
How can I link a measuring point (not a counter) to the Maintenance Plan? Currently, I can only link a counter to a Maintenance Plan but not a measuring point. The reason why I am asking for this is that I would like to trigger automatic creation of
-
Hi everybody I'm trying to use a fade effect, using transitions on this scenario, i have a panel , which have inside it a tab control, which in turn have several tabs, with canvas as the base container, it also has several datagrids on it and a form.