W/ dsl isp airport express not found. fix?

I just moved from a cable modem geography to a dsl geography. I use Airport Extreme, Time Capsule and Airport Express. I have a MacBook Pro. My wife has a MacBook and an iPad2. The Extreme binks yellow. So do the Express and Time Capsule. But the latter two aren't found by the Aitport utility. I do have internet, despit the blinking extreme. Extreme is set in in DHCP. How do I get back the Capsule and Express?

Connect the capsule and express by ethernet to the computer you want to set them up with.
If that doesn't work, my solution has then been to factory reset them.

Similar Messages

Airport express not found after setup

I have a maddening situation. At the beginning of setting up my airport extreme, the computer has no problem finding the wireless device. However, after the A/E is configured and added to my current network (linksys router), the computer can't find the A/E anymore.
What's going on?

The following are Apple's instructions for setup using the Airport Setup Assistant, which is different from Airport Utility, but most of the steps are the same. Some are important for your installation, such as "do NOT select extend the range of my Airport..." and entering your network password correctly. Some steps, like plugging in the Airport, you probably already figured out
Since your router is a Linksys product, after the Express is set up you will no longer be able to see it using Airport Utility. The reason is that you set up the Express using its wireless network (Apple Network xxxxxx), which is subsequently disabled after setup. Once you're done and you click Update you'll be using your Linksys wireless network. Airport Utility only recognizes Airport networks. You didn't create one with your Express nor do you want to given your desired setup. If you need to use Airport Utility to configure the Express again you'll need to perform a hard reset.
If everything's right and you have checked iTunes Preferences > Devices "look for remote speakers connected with Airtunes" option you should see a new menu appear in the lower right of the iTunes window.
If this doesn't work, try disabling your router's encryption temporarily to simplify things. Reset the Express and run Airport Utility without a password this time. You may also need to modify your Sharing > Firewall settings too.
Hope it helps!
Plug AirPort Express into a power outlet.
On your computer, join the wireless network created by AirPort Express.
Open AirPort Setup Assistant. Mac users: Find it in /Applications/Utilities/. Windows users: On the Start menu, point to All Programs and click AirPort.
When you see the Introduction screen, click Continue.
Select "Set up a new AirPort Base Station" and click Next.
When the AirPort Setup Assistant confirms that it has found your AirPort Express, click Continue. (If >your AirPort Express wasn't found, click Try Again.)
Select "Connect to my current wireless network."
Be sure that "Extend the range of my AirPort wireless network" is not selected (this option is used >only for WDS).
Click Next; AirPort Express Assistant will scan for your existing wireless network. Once it finds it, click Next again.
Choose the correct network (there may only be one) from the Wireless Network Name menu. If the wireless network is password protected, you will be prompted to enter the password. Enter the password and then click Next to continue.
Note: If you have difficulty with your password, you can get help with joining a third-party WEP-protected network.
Enter the name of your AirPort Express.
Tip: If you don't know the name, it's what appears in iTunes as the name of your AirTunes remote speakers.
Click Next.
Assign an administrator password for AirPort Express. This password can be different from any network password, and is used for just changing settings on AirPort Express.
The Summary screen outlines the configuration options you've set. Optionally, you can click Show Passwords to review the administrator and network passwords. Finally, click Next to update AirPort Express with your settings.

Airport express not found (by macbook) after moving to the US

Hi,
I unplugged my perfectly working AX (v6.3) in Europe, moved to the States and now have connection problems (same Macbook Pro, same AX). ISP here is Comcast.
Symptoms: The airoprt utility (AU) doesn't see the AX (whether cable modem is plugged or unplugged to AX). Reset or factory-reset of AX doesn't solve the problem. If I restart AX and then also the computer the AU sees the AX, but can't connect (connection timeout). After this first trial to connect the Macbook will not see the AX any more until I reboot the Macbook.
I can connect the AX via ethernet and configure it using AU. I did not set a password (for test reasons), connection mode is 802.11b/g compatible, channel auto, security none.
Also did a restart of the cable modem (unplugged for 10 min) like described elsewhere in the forum. No help. Anyway, if I am correct the AU should see the AX even without the modem connected to it, right? If I plug the modem to the AX and restart the modem, the LED on the AX will go green. Still it is not detected by the Macbook.
Any ideas highly appreciated. Thanks!!!
Message was edited by: Eppentorf
Message was edited by: Eppentorf

As Duane mentions, 5 GHz signals do not travel or penetrate well because the higher frequency signals in this band are absorbed by any obstructions much more quickly than 2.4 GHz signals.
Although not exactly true, unless you have close to line-of-sight between your computer and the AirPort Express, you will probably have much better results using the 2.4 GHz signals which penetrate more effectively and work greater at longer distances.

Remote speakers on AirPort Express not found

Remote speakers connected to an AirPort Express network can't be found by iTunes or Airfoil. The previously available drop down menu on iTunes and Airfoil are no longer present.
Airport express is connected to fibre optic cable, MacBook is using Wifi to stream music from computer to remote speakers.
The system was working fine until some recent Apple updates that auto installed via software update.
Would welcome any help with this.
Steven

Found idea of unplugging airport express, closing Itunes, the replugging teh airport express and restart itunes. The speakers are showing once more.
Thought others may find this useful.

Airport express not found by my mac

I have plugged my airport express into my speakers, but my Mac can't find it on the wireless network

Did you set the Express up originally or is this a new setup.
You may have to reset the Express doing a Hard or Factory reset.
http://support.apple.com/kb/HT3728

Airport express not found by airport utility

I have set up plenty of Airport devices in my other house. When I tried to add an AirPort Express to an AirPort Extreme, the AirPort Utility cannot find the Express nor will the Express light go green. Suggestions???

Whoohoo! This finally worked for me!
I had my AX set up in my old apartment and then moved to a new spot. I didn't use it for 6 months and decided to try and set it up this weekend only to see it do nothing but flash amber after I would follow all of the other directions to the letter. Several tries with Airport Utility got me nowhere.
Here's what worked:
- plug in stereo cable and ethernet cables to router. I actually used an old pair of headphones so i could test in different places.
- Do a factory reset (hold reset, plug in, wait for 4 green flashes, release)
- Use the Airport Admin Utility to set everything up. This includes router name, password, AX name, and all that. Nothing exotic. I'm using WPA2.
- Let it update.
- Poof! It works!
- I then unplugged it and moved it to my living room and tried it again. The AX name comes up in iTunes and music comes through the cable.

Best Router with DSL Modem for use with AT&T DSL and Airport Express?

I recently had my old 2WIRE from AT&T DSL service die, so purchased a new 2WIRE 2701HG-B. My old 2WIRE worked with my Airport Express, which is hooked up to my DVR for DirecTV use. The new 2WIRE apparently is not compatible with the Airport Express, so I returned it and purchased a NetGear Wireless-N 300 Router with DSL modem. While this one does work with the Airport Express setup, it runs very slow. This router has mediocre reviews, so I'd like to find a better one.
I'd appreciate any suggestions for a Router w Modem that would work best with my AT&T DSL and Airport Express (802.11n) within the $100 - $150 price range. Thanks!

Configure the Express as a bridge: Connect via "Ethernet", and set Connection Sharing to "off (bridge mode)".
The switches ought not to be a problem, and I don't know why your router froze. The Express is simply another wired client, just like a computer might be.
do I turn off DHCP on the router,
No. Something has to provide routing functions so leave the Linksys alone.

Airport express not working since today's itunes update

Since updating iTunes today, Airport Express not working. More specifically, the Airport software will recognise the device exists, but iTunes cannot connect to it, just getting error message.

Ray Dio wrote:
Since updating iTunes today, Airport Express not working.
try this:
go system preferences > network > airport > advanced > TCP/IP and set *configure IPv6* to off. click on apply.
now have iTunes connect to the remote speaker again.
JGG

Airport Express (not n) with ethernet hub and as wireless base

Will Airport Express do this?
I've got a cable modem. It connects by ethernet to a hub. Airport Express (not n) connects to the hub by ethernet. My laptops (MacBook and HP 69xx WinXP Pro) connect to AX and internet just fine.
In that same hub, I want to connect a D-Link DNS323, which I wish to be made accessible to the wireless network provided by AX. Here's a sort-of diagram:
cable ethernet
modem ---> hub <--- Airport Express <--- laptops, AppleTV, etc. by wireless
^
|
|
D-Link
DNS 323
Can AX (old style, not n version) use its ethernet connector to both communicate with my cable modem and with other wired ethernet devices through my hub?
Thanks for helping. I tried searching for similar posts, but I failed to find an answer.

With only the hub, the NAS, and the express, you can't access both the internet and the NAS wirelessly at the same time. Here's why:
The AirPort Express has only one Ethernet port. That port can either act as a WAN port or a LAN port, but not both at the same time.
You need the Express to be connected to the internet. Unless you have another wireless router (Apple or otherwise), it will have to be connected through its Ethernet port. Therefore, the Ethernet port must act as a WAN port.
The NAS, on the other hand, is part of your network. For it to be connected, the port must act as a LAN port.
This means that the NAS can't be connected to the Express via Ethernet because then the port would need to act both as a LAN port and a WAN port, which it can't do.
This means you'll need an additional wireless router if you want to access both the internet and the NAS at the same time.
If you have another wireless router (it doesn't have to be an AirPort), I can help you configure it to work with your current network so that you can access the NAS.
Message was edited by: adsfushi72

Airport Express not showing name given

Hello Community,
I have the latest Airport Extreme and Airport Express. I am also using the latest Airport Utility, 6.0.
I am using the Airport Express to extend my network. However, under my Wi-Fi icon (upper right icon), I can not see the name given to my Airport Express. Therefore I can not manually select it. I can see it's name in iTunes, if I want to remotely play music and under "Network>Advanced" I can see it has the "same" name as my Extreme, but with an "AE" after the Extreme's name. Im sure that means Airport Express. Also, of course I can see the AE and the name given to it using Airport Utility.
Question, why is the name given to the Airport Express not showing up under my Wi-Fi ? I could have sworn when I first configured it, it showed up under the Wi-Fi drop down menu under "Other Devices", I believe it read.
I am running Lion, 10.7.3
Any help please ? Thank you in advance !

By the way, I set up the Airport Express wirelessly. Should I have connected it with an Ethernet to my Extreme to set the Express as an Extended network device ? Thanks !

Airport Express not seen in Airport Utility! PleaseHelp!

Airport Express not seen in Airport Utility! PleaseHelp!
Changing Utility version did not help.
I have successfully used my Airport Express 802.11n A1264 (1st gen.) to stream my iTunes music wireless to my living room stereo. Lately my Airport Express looses connection after every restart and does not show in the Airport Utility.
I run 10.6.8 on a Quad core Mac Pro. up to date on al software updates per 10.6.8 I use a 3rd gen. Airport Extreme 802.11n.
W.W.

I actually did this by myself not into the computer but a secondary Ethernet port on myTripple play Fios modem.
The Express showed up right away. I did the reset and set it up in the utilities to join my existing wireless network. I don't remember all steps but at some point it asked me to put in internet info, I did not, and then it asked me if I wanted the amber flashing stoped so I could use it to stream music. I clicked yes and the set-up finished with a green light. After I disconected the Ethernet cable, plugged in the Express in my living room stereo wireless, it has been working normal since. I restarted a few times, green came right back.
James since you had the right idea I gave you the 10 points. Thank you for being helpful.
Walter

Just did firm ware update on time capsule an now my airport express not connected do to air port utilities doesn't support base station ??

just did firm ware update on time capsule an now my airport express not connected do to air port utilities doesn't support base station ?

mickair wrote:
I have been experiencing some networking problems
Welcome to Apple's discussion groups.
I have the latest Time Capsule ("TC"), an old Airport Extreme Base Station ("AEBS") bought in 2007 and 2 Airport Expresses, one bought in 3 months ago ("AE-Alpha") and the other bought back in 2007 ("AE-Beta"). All of them have been updated with the latest firmware.
Based on those dates, the AirPort Extreme is probably flat (as opposed to dome-shaped), making it 802.11n-capable. The Newer AirPort Express is probably an 802.11n-capable model A1264, while the older one is probably a model A1084 or A1088.
I use {the TC's} DHCP function ... to avoid unauthorized use.
This a discussion for another thread, but that's not what DHCP is for.
The wireless setting for it is to participate as WDS Main, but after reading various posts, it seems WDS is a bad idea
With that older AirPort Express you're stuck with WDS unless you decide to replace it with a newer model.
The AEBS is currently setup as being a WDS Relay at the moment
Why a relay? That's only needed if there's another base station "beyond" it that is configured to depend on it.
Since the AEBS is connected to the TC via Ethernet, you should probably configure it as a "roaming network":
http://discussions.apple.com/thread.jspa?threadID=2273124
{The AE-Alpha} connects fine as WDS remote at the moment
I don't have any experience with mixed WDS and non-WDS networks, but since it's 802.11n-capable, you may be able to configure it to "extend" the network of the TC rather than as WDS. Look for a setting on the TC to "Allow this network to be extended".
Physical location:
AEBS in one end, TC and AE-Alpha in the middle while AE-Beta on the other end.
A device such as "AE-Beta" that's supposed to extend a network shouldn't be "at the end" but should be half way between the central base station and the clients that need an extended network.

Airport express not being found after going through setup wizard

I restore the airport express to factory conditions by pressing the reset button while plugging it in and then continue pressing the reset button for a further 10 seconds.
I open airport utility and see my airport express in the left column. I click the setup wizard and perform the following:
I click:
1. I want airport express to join my current network
2. I want airport express to wirelessly join my current network
3. I select wpa2 personal and enter my wireless password for my router
4. I click the update button. Message says: "The settings for this airport express have been successfully updated. you can close this window now or wait for this airport express to restart
after about 3 minutes or so I get this message:
"airport utility was unable to find your apple wireless device after restarting. the settings for this apple wireless device have been succesffully updated, but there was a problem joining the wireless network or finding the apple wireless device. you may need to select your netowrk from the airport menu and try again."
any thoughts?

HI
are you sure you are using the correct security type for the main network, when it asks you, after selecting the network you want to join? If you chose the wrong one the airport utility will not tell you, it just won't find it after restart.
check it in network pref/advanced tab
also check the firmware version of the express in airport utility/manual setup/summary tab

Airport Express not working with PK5000

I'm new to this site....
I just bought a Airport Express to stream music and extend my wireless signal...
I currently have a DSL connections, my modem is a PK5000...
I'm having troubles with the connection...
Does anyone have the procedures on what I need to change in the modem to get this to work...
Do I hard wire it from the modem to the Express or run it on wireless? No instructions I've found so far, is clear
Thanks,
Kelly

I have the same issue. Mine fixed itself for a bit and now it's broken again. I'm thinking it's going to be intermittently broken. I've tried turning both devices off and on again but that did not help.

Airport Express not Connecting Wirelessly

Hi,
I'm on a Windows 7 machine. I'm using a Airport Extreme (802.11AC) as a router for my fiberoptic connection. That has been working fine for about six months. Today, I decided to extend the wireless coverage so I purchased an Airport Express (802.11N Second Generation). I cannot get the amber light to stop flashing and the only way I am able to get the device to show up in Airport Utility is if I plug it directly into the Airport Extreme.
I've reset the device multiple times without success.
I have just finished downloading the Airport Utility for Windows. I went through all of the prompts and set up the Airport Express to extend my existing wireless network. I was able to get the device to show up in the Airport Utility (both for the Windows and the iPad apps). However, the second I unplug it from the Airport Extreme, the connectivity goes away.
I don't believe it's a signal strength issue because I'm plugging it in at a location where I've been connecting wirelessly to the Airport Extreme for six months or so and never had a problem. However, just to be safe, I have tried moving it to two separate locations without any luck.
While I was searching the support articles, I found one where a user suggested that the TCP/IP addresses may have become corrupted. Then, they linked to a Microsoft page that included a utility to fix those issues. I ran the utility, but still have not had any success.
Here's a summary of what I have done:
1. Reset the device via the reset button on the back.
2. Connected via ethernet cable to the Airport Extreme basestation and completed setting up the device through the Windows utility. Was able to get to a green light and have the Airport Express registering as visible on both the iPad and Windows Airport Utility apps.
3. Checked wireless strength by attempting setup at multiple locations.
4. Installed a Microsoft TCP/IP using their NetShell utility.
Devices involved:
Windows 7 machine
Airport Extreme (802.11AC)
Airport Express (802.11N Second Generation)
Airport Utility version 7.7.3
What am I missing? Any suggestions about how to resolve this?

If you connect an Ethernet cable to the Express, then AirPort Utility thinks that this is the way that the Express is going to be set up permanently.
If you want the Express to connect using wireless, you cannot use an Ethernet cable at all during the setup.
Reset the Express back to factory default settings
Power off the AirPort Extreme for a minute, then power it back up
Temporarily, locate the Express in the same room or close proximity to the Express
On the iPad home screen......tap Settings
Tap WiFi
Under the heading of Setup an AirPort Base Station
Tap on AirPort Express
Follow the prompts
Once the Express is set up, move it to a location that is approximately half way between the AirPort Extreme and the general area where you need more wireless coverage. Reason.....the Express can only extend the quality and speed of signal that it receives from the AirPort Extreme.

W/ dsl isp airport express not found. fix?

Similar Messages

Maybe you are looking for