W,indows 7 shuts down at welcome page after a period of time, when user is not logged in.
I have two users on my computer, when they are both logged out and the computer is at the welcome page, I need the computer to stay on , as I need to remote accsess it.But the computer turns off after a period of time, even though in settings, I have all
the power setting to never off.
How do I stop the computer turning it self off, when there is no one logged in, and on the welcome page?
Thanx.
Check in BIOS sometimes for hours shut down.
Is the computer starts then straight without a problem? If you do not check the temperature of the processor.
Start your computer in safe mode and remove programs that start automatically by MSCONFIG
Please Mark This As Answer if it helps to solve the issue
Tzuri Ben Ezra | My Certifications:
CompTIA A+ ,Microsoft MCP, MCTS, MCSA, MCITP
|
FaceBook: Tzuri FaceBook | vCard:
Tzuri vCard |
Microsoft ID:
Microsoft Transcript
|
Similar Messages
-
After update to 11.3.1 users are not logged in to the ZAA
Hi,
we did a update from 11.2.3 to 11.3.1 a few weeks ago. All works fine but there is one problem. A lot of users are not logged in to the ZAA. If i try to start a remote session with the username i get the message the user is not logged in to any device.
If i connect me to the device and look at the ZAA the user is not logged in and i can not log in because i get the error message that the username or password is wrong.
The solution is to go to the registry -> HKEY_LOCAL_MACHINE\SOFTWARE\Novell\ZCM\ZenLgn\Hist ory\Cache\domain.local and i have to delete the user.
After that the login works fine
Sometimes i have to delete the user in this registry key too -> HKEY_LOCAL_MACHINE\SOFTWARE\Novell\ZCM\ZenLgn\Hist ory\CachedUserZenNames
Is that a known bug? What can i do to solve that problem?I would recommend an SR.
You should not have to do that.
There were some similar bugs in the past, but were fixed in 11.2.x and
should not exist in 11.3.x at all.
On 10/15/2014 7:26 AM, SteffenMuch wrote:
>
> Hi,
>
> we did a update from 11.2.3 to 11.3.1 a few weeks ago. All works fine
> but there is one problem. A lot of users are not logged in to the ZAA.
> If i try to start a remote session with the username i get the message
> the user is not logged in to any device.
> If i connect me to the device and look at the ZAA the user is not logged
> in and i can not log in because i get the error message that the
> username or password is wrong.
>
> The solution is to go to the registry ->
> HKEY_LOCAL_MACHINE\SOFTWARE\Novell\ZCM\ZenLgn\Hist ory\Cache\domain.local
> and i have to delete the user.
> After that the login works fine
> Sometimes i have to delete the user in this registry key too ->
> HKEY_LOCAL_MACHINE\SOFTWARE\Novell\ZCM\ZenLgn\Hist ory\CachedUserZenNames
>
> Is that a known bug? What can i do to solve that problem?
>
>
Going to Brainshare 2014?
http://www.brainshare.com
Use Registration Code "nvlcwilson" for $300 off!
Craig Wilson - MCNE, MCSE, CCNA
Novell Technical Support Engineer
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human. -
Rmiregistry shutdown after a period of time!
I binded a remote service to the rmiregistry,and start the rmiregistry using a seprate .sh file (not start in the program). I found the rmiregistry will shutdown and exit after a period of time when there're no calls made to the remote service binded.
It seems that if no calls were made to the remote service, after some time interval, the GDC will collect the remote service, and when there're not a single binded remote service that were not GDCed. the rmiregistry will exit.
Is my opinion right or not? and what can i do to solve the problem?He means me, but I don't have a better answer, except maybe this. Does your .sh script by any chance say
rmiregistry &If so change it to this:
exec rmiregistry &The latter is better, because it won't exit when the shell that started it exits, but this is a Unix issue not a Java issue. -
How can I uninstall iBooks on my iPad? After I upgraded the operating system, the app shuts down every 30 pages or so. It is super frustrating. Never had a problem before.
With iOS 8 it's now a built-in app, it can't be deleted/redownloaded.
You've tried closing the app (and other apps) via the iPad's taskbar and done a soft-reset to see if that improves things ?
Closing an app : iOS: Force an app to close
Soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
IPhoto keeps shutting down a few seconds after I open it. What is wrong?
My iPhoto shuts down a few seconds after I open it. It sys there's problems to repair, then it repairs the problen, then a few seconds later it shuts down. What can I do?
Post the first 50 lines only of the crash report
Regards
TD -
my downloaded apps are not opening, they flash and then shut down. This hapened after i upgraded to the 5.0. How do i fix it!? I've tried everything
You need to resync you applications or redownload them for free via app store. They may be read by your phone, but they are really not there. Re downloading will fix this.
-
Pages died today. Just downloaded the latest update 2 days ago. Last night shutting down my very new MacBook Pro Retina, Pages stopped shut down. Today Pages will not open, all my Pages docs cannot open. Help please! Anybody have a fix?
You probably have 2 versions of Pages on your Mac.
Pages 5 in your Applications folder, will open Pages '09 files but will alter/damage them. It can not open Pages '08 files.
Pages '08/'09 in your Applications/iWork folder which can not open Pages 5 files.
When you were shutting down you probably had an unsaved document open.
You probably are opening the wrong versions of Pages to open the wrong document format.
Pages 5 has had over 90+ features removed.
Most users are going back to Pages 09 whilst Apple sorts this out.
Peter -
my computer displays grey screen and apple logo for 10 minutes or more during start up and shut down. sometimes it refuses to shut down . this issues started after installing OS lion. what do i do?
I don't think it's exactly an incomplete installation brody, but most likely in-correct permissions somewhere along the line that either happened, or became magnified during the upgrade. Also, it could be corruption as well.
First thing to do, is boot up holding down Shift key to do a safe-boot so we an clean up any corrupted OS caches, after that do another reboot, but go to the Lion recovery, and scan the HD for errors, repair any if you find them, and then try to do a Repair Permissions job.
That should fix the issue, if not, we can start doing a PRAM reset and SMC for good measure. -
My 822 now says, "ERROR: Unable to find bootable option. Press any key to shut down." Just happened after my phone froze. Everything I've searched says to replace the phone. I have no phone in or out, no alarm....what is going on with this? I see others have the same problem.
Just got the same error message today. My phone went to the black screen of death with the error message at the top. Contacted Verizon via chat. Was online for 1 hour and 15 minutes only to find out that nothing could be done which I could have told them based upon what I had read on this site. Of course my phone is out of warranty since I have had it for 1 1/2 years and I am not eligible for an upgrade. How convenient! I was told to contact Nokia which I did and they gave me a download to try to reset everything. It looked like it was working but after almost 3 hours it got to the end and nothing happened. It just froze even though it said it was done. I rebooted the phone and am back at the same black screen of death. Guess I have to buy a used phone and then will have to reconsider whether or not to stay with Verizon going forward. I have not had any issues with the phone in the past - keep it in an otter box, never dropped, never got wet, etc. But all of a sudden it goes haywire like this that seems like either a hardware or software problem but something completely out of my control and all I get is sorry, you're out of warranty!
-
My screen is really faded, after it shut down (overheated I think) after being on for about an hour.
My screen is really faded, after it shut down (overheated I think) after being on for about an hour. Its kind of like how you see the world, when you get out of a pool that has too much chlorine.
I have tried shutting down, and re-starting. I have re-calibrated.
I have tried changing brightness.
Nothing works so far.
HELPWait a few hours before restarting it, also post actual temps. You can download iStatPro for free, once you have restarted, download it and post the actual temps.
Also try resettng the PRAM and SMC, do each multiple times. If you don't know how please click Intel iMac SMC and PRAM resets -
Tour shuts down after a period of time have to plug into charger for reboot
Today I noticed that my phone will shut off after a little while of inactivity. The battery will be mostly full, and it thinks it dies. So inorder to reboot you must plug it into the charger. Once you plug it into the charger you get the image of the battery with a bolt in the middle of the screen. After a few minutes of charging it resets to the home screen, and after another period of time it will do it again. You might think this is occurring because the battery is dead but the battery will be 50% maybe a little more or a little less. I am wondering if this is an OS problem or something that is just wrong with my phone...
That definitely sounds like a phone issue. We had a user with a similar problem that ended up getting her phone replaced. She hasn't had any issues since.
-
why does my iPhone 5s shut down unpredictably and needs to be reset every time to start back up?
Hi Cyprus11,
Thanks for visiting Apple Support Communities.
If your iPhone is shutting down unexpectedly, I recommend going through these troubleshooting steps:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Best,
Jeremy -
I was an apple beta tester for iOS7 and now my iPhone 5 shut down, it's unresponsive it gets recognized by iTunes when plugged into the computer but that's it. Since I was a beta tester is there any way to fix my iPhone??
Are you still running iOS 7 bet?. If so go to the private developer section for help. We cannot help you here with beta software.
-
I inserted a burnt disc into my macbook pro and iTunes froze, had to shut down my mac in order to eject the disc. Is it not possible to transfer music from homemade cds onto my mac?
Yes, it is possible.
You had an issue in this individual instance. -
My iPad acting so weird tonight. When it shut down automatically because the battery has been drained. When I opened it, it creates some weird sounds like *swoosh* blahblah. It does make me feel nervous. Can someone help me? Does it already broken?
adetoye50 wrote:
Dear Contacts Journal Support Team,
FYI, this is a user to user support forum. You are NOT addressing Apple here.
Honestly, I doubt anyone is really going to take the time to read the novel you have written.
Maybe you are looking for
-
I made a purchase with my debit card on The Simpson Tapped out game, And now my game won't open. It just kicks me out every time I click on it. How do I fix this problem with out deleting my app?
-
Printing in Black and White From Ipad2
I would like the option of printing my emails and amazon reciepts in black and white. I have the HP Photosmart E-aio D110a printer. I am trying to print in black and white from my ipad2. I consulted with Apple Support as well as HP support today.
-
Report Export option on the top
Hi In Oracle Apex reports, Can we have Report Export option on top and bottom simultaneously? Thanks,
-
Hi! I'm new to php coding. I am trying to build a form in which customers fill out and submit the data to by db. I've followed to the letter on how to build an insert record page. everything looks good except when I upload it to my server, nothing sh
-
Note 1479040 - Header Condition not deleted during GOA distribution
Hi all i do see condition at header level. I know item wise condition for MATERIAL CONDITION how header condition helps in the business . in what way. Muthu