W.R.T OSS NOTE 339780-Is there a solution for ECC 6.0

Hi all experts,
We are having the same problem as mentioned in this OSS note .And there is a solution also but its only valid for 4.6c not for the latest versions.I'm requesting the experts to help me find a solution for ECC 6.0 .Pls let me know if dont have access to SAP notes i can send it to you .Thanks
Naik

below is the note.......
31.10.2007 Page 1 of 2
Note 339780 - Characteristic that refers to a table field is not updated
Note Language: English Version: 1 Validity: Valid from 08.12.2001
Summary
Symptom
If a batch is characterized with a characteristic that refers to
a table field, and this table field is derived or changed during
derivation, shipping approval or monitor (e.g. ZUSCH), the corresponding
characteristic is not updated.
Additional key words
DRVSA
DRVMO
derivation
ZUSCH
Cause and prerequisites
The problem is caused by a programming error.
Solution
Apply the following source code corrections.
Source code corrections
Header Data
Release Status: Released for Customer
Released on: 12.10.2000 22:00:00
Priority: Correction with low priority
Category: Program error
Main Component LO-BM-SA Shipping Approval
Additional Components:
LO-BM-DRV Derivation
The note is not release-dependent.
Support Packages

Similar Messages

TS1363 iTunes recognizes my iPod but my computer does not. Is there a solution for this?

When I plug my iPod Nano into my computer, iTunes recognizes it, but my computer does not so I am not able to sync it. I have turned my iPod off before plugging it into my computer, but that doesn't seem to help. Has anyone else had this problem? I haven't had this issue until about 2 weeks ago and the only thing I've done within the last two weeks was upgrade to the latest iTunes.
I appreciate your help!

I figured out why my iPod wouldn't sync. I must have previously changed my "Sync Music" setting to "Selected playlists, artists, albums, and genres". Once I changed that setting to "Entire music library", my iPod was able to sync successfully.

Release notes or information on WTY solution for ECC 6.0

Our company is upgrading from 4.7 to ECC 6.0 and we have WTY functionality implemented. I am looking for release notes on the WTY solution or upgrade information and can't locate anything. Does anyone know where I can get any information on this solution?

Hi,
In order to apply EHP4 you need solution manager 7.0 on SP15 at least while it is recommended to have solution manager on SP17 or more.
And I think it is possible to install solman on 32 bit platforms.
Thanks
Sunny

When converting tables in a MS Word 2010 or 2007 to PDF the table borders do not retain the correct thickness as identified in the word document. Is there a solution for this issue?

When converting tables in a MS Word 2010 or 2007 to PDF the table borders do not retain the correct thickness as identified in the word document. Is there a solution for this issue?

Please try with latest version of MS Word and Acrobat.
Regards,
Anoop

Is there a solution for graphs that do not translate from Excel to PDF?

We are working on an Excel Spreadsheet with graphs but when we create a PDF of the sheet the graph does not contain the ledger or values. Is there a solution to this problem. We have tried both printing to PDF and exporting to PDF.

Just a note: If you want to print the PDF to paper, it may still not print correctly even though it looks correct on the PDF document- the printed graph may flow off of the paper sheet. When you click Print, a print dialog box opens with some options and a preview. If the preview does not look correct, change the size option to "Shrink oversized pages".
Jeffry Calhoun
Workforce Analytics Manager
Ohio Department of Job & Family Services
P.O. Box 1618, Columbus, OH 43216-1618
InterAgency: F376, 4020 E. 5th Avenue
614-644-0564
Fax 614-728-5938
[email protected]
OhioMeansJobs.com -
The next best thing to having an HR department.
OhioMeansJobs.com -
Ohio's premier website for connecting businesses and job seekers - quickly, easily, and for free!
>>> alscud <[email protected]> 4/9/2012 9:34 PM >>>
Re: Is there a solution for graphs that do not translate from Excel to PDF? created by alscud ( http://forums.adobe.com/people/alscud ) in Creating, Editing & Exporting PDFs - View the full discussion ( http://forums.adobe.com/message/4323530#4323530 )
Thank you Lori for your help your suggestion works!
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4323530#4323530
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4323530#4323530. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Creating, Editing & Exporting PDFs by email ( mailto:discussions-community-acrobat-creating__editing_%[email protected] ) or at Adobe Forums ( http://forums.adobe.com/choose-container!input.jspa?contentType=1&containerType=14&contain er=4697 )
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.
Ohio Means Jobs
You're looking for something unique. Use more than an ordinary site.
http://www.ohiomeansjobs.com
This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain private, confidential, and/or privileged information. Any unauthorized review, use, disclosure, or distribution is prohibited. If you are not the intended recipient, employee, or agent responsible for delivering this message, please contact the sender by reply e-mail and destroy all copies of the original e-mail message.

OSS note 1044741 contains no correction instructions for 46C.

I am trying to apply OSS note 1044741 to fix BC Set creation for deleted table entries. However OSS note 1044741 contains no correction instructions for 46C. Please provide assistance.
Bruce Reeves

Dear Bruce,
How to raise an OSS note:
In service.sap.com, choose Keys and Requests -> Development Requests -> Create Development Request
The Create development request form appears. It is divided into the sections described below:
Classification
In the 'Classification' section of the form, you can classify your request by selecting various criteria from the listboxes. This information is used for reporting purposes and to assign your request to a processor at SAP.
Reporting unit is only displayed for information. It defines if you enter the request for yourself, on behalf of a Customer Competence Center (CCC), of a customer, or of a user group. Which entries are available depends on the organization you are working for.
Priority defines the priority this request has for you.
Industry is only displayed for information. This is the industry of your company.
Other Industry allows you to select further industries if the request refers not only to your industry. To select more than one industry, hold down the <Ctrl> key and select the desired items by clicking on them.
Component defines the application component to which your request applies.
Core release defines the R/3 release you are currently working with.
Add-on defines, in case the request applies to an industry solution, the specific add-on release you are currently working with.
General provides generic features for a better classification of your request. If you wish to define more than one category, hold down the <Ctrl> key and select the desired items by clicking on them.
Cross-component provides cross-component features for a better classification of your request. If you wish to define more than one application, hold down the <Ctrl> key and select the desired items by clicking on them.
Only relevant for country allows you to specify that your request is only relevant for the selected country.
Personal classification by requestor
In the 'Personal classification by requestor' section, you can add your own classification criteria to the request:
Classification 1 - 3: allows you to specify your own features, e.g., "Project xyz". You can enter any text up to 30 characters in these fields.
Description
In the Description section of the form, you can describe in detail the feature you request for the SAP software.
In the Language field, select the language in which you are describing your request. For processing at SAP, all non-English requests will be translated into English.
In the Short text field, enter a meaningful title for your request.
The Long text field is mandatory. Use it to describe your request in detail. Even if you attach external description files, please enter a detailed description here.
The Business need field is mandatory. Please use it to explain why the requested feature is needed for your business.
The Example field is collapsed by default. Click on the plus symbol to the left of the field to expand the entry field, and enter an example for the requested feature.
The Current workaround field is collapsed by default. Click on the plus symbol to the left of the field to expand the entry field, and describe which procedure you currently use instead of the requested feature.
The Proposed solution field is collapsed by default. Click on the plus symbol to the left of the field to expand the entry field, and describe how you propose to solve the issue related to your request.
Attaching documents
You can also attach files that further describe your request, for example, documents or presentations. All file types supported by this site can be attached, this includes all popular Office formats.
To be able to attach files to your request, you must have the Check In Wizard program installed on your computer. Otherwise, an error message will be displayed. If you do not have the Check In Wizard installed, click here to start the installation
NOTE:
This will automatically save your request with the status New. The request will, however, not yet be sent to SAP. If you have not yet filled in all required fields, the system will prompt you to do so before you can add an attachment. The attachments will be listed only after you have saved or sent the request.
To attach a file, choose Add attachment.
The Check in Files dialog box appears.
Select the file you want to attach, and choose Open.
A status dialog box appears. When the status The check in process has completed successfully is displayed, confirm with OK.
The file is now attached to the development request.
Repeat the above steps for any additional files, if required.
Saving the development request
When you have entered all required data you can save your request. To do this, choose Save. You can then edit the request and send it to SAP later. This allows a company or user group to internally manage, discuss and consolidate its development requests before it decides which development requests will be sent to SAP in the next step. (Development requests that are no longer relevant can be set to status Closed by author).
Sending the development request to SAP
When you have entered all required data, you can alternatively send the request to SAP immediately. To do this, choose Sent to SAP. You need a special authorization to use this function. If you had saved a request before but not yet sent it to SAP, you can send it to SAP later using this function.
Resetting the request form
If you make a mistake during data entry and want to reset all entries to the values they had when you opened the form, choose the Reset button.
Closing the request
If you find that you no longer need the request, you can close it. In this way, you specify that no further processing of the request is necessary.
To close the request, choose Closed by author.
(After closing, confirm the request to remove it from your inbox.)
Confirming the request
Confirm the request if you have received SAP's final decision. The development request will no longer be shown in your Inbox.
To confirm the request, choose Confirm.
You will find the answers in your SAP inbox.
Visit the following link for information regarding SAP Notes:
http://help.sap.com/saphelp_nw04/helpdata/en/b8/3cf839fd35384de10000000a11402f/frameset.htm
Hope this will help.
Regards,
Naveen.

HT4484 i used to have an app store and lost it and i created a new one and i can not update the iphoto app because it was updated with the old account, is there a solution for this problem?

i used to have an app store and lost it and i created a new one and i can not update the iphoto app on my macbook pro because it was updated with the old account, is there a solution for this problem?

Content and Apple IDs -
Content is forever tied to the Apple ID that bought it. Apple does not transfer content from one Apple ID to another. Apple does not merge Apple IDs. You will never be able to access your content bought with one Apple ID with a new Apple ID.

I am having an iPad 4. I am not getting alerts while receiving any call in my ipad. Is there any solution for this?

I am having an iPad 4. I am not getting alerts while receiving any call in my ipad. Is there any solution for this?

Check your settings
Settings>Notifications>FaceTime/Message>Alert Style

If I switch to iCloud, Outlook for Mac is not synchronizing with iCal and iCloud anymore. Is there a solution for this problem?

I normally use Outlook for Mac as the standard email and calendar programm. When I use the USB cable fro synchronising contacts and calendars with my iPhone 4s ther is not problem at all. iCal, Mail and Oulook for Mac are synchronising perfectly.
When I switch to iCloud, Oulook is completely empty and Calendar and Contacts are not synchronised anymore.
Is this a known problem, and is there a solution for it?

I have the same keyboard and do not have battery issues.
It may have something to do with using rechargeable batteries.
You can also try removing the keyboard then re-pairing it. Maybe a bad bluetooth connection is draining the battery.
System Preferences > Bluetooth > right-click (control-click) on the keyboard > Remove > Remove
Wait for it to show in the bluetooth list then Pair > enter the number sequence & return as displyed on the screen.

HT204406 I purchased the additional Icloud storage for my ipod touch. Since it removes all my music from the touch and stores it in Icloud, I find that when I am not at my wifi location or another one,I can't access my music.Is there a solution for that?

I purchasedhe additional Icloud storage for my ipod touch. That removes all my music from the ipod and putsd it in Icloud. I find that when I am away from my wifi connection, like when walking or working out, I can't access my music. Is there a solution for this?

Download the music to your ipod when you are in a wi-fi area.
It will be stored on your ipod.

Is there a solution for the limited time of videorecording?

Is there a solution for the limited time of videorecording?
By recording on my iPad2 there is a maximum time of 49 minutes and 51 seconds.

Hello Studio X
I have an iPad2 with 64 GB. After I start the videorecording it stops automaticly by 49 minutes en 51 seconds.
I looked in my settings and there was still enough space left. Although I do not think that the 64Gb is not the problem.
I bought myself an alternative recording app now. I hope it works properly but if the quality is OK. I do not know. I combine the recordings with my video (digitaltape) camera of Sony.
Thanks for your reply
sozave007

TS4436 hi, when zooming in to capture still images, the image is really blurred and out of focus. is this a hardware issue and is there any solution for this?? or is my device faulty?

hi, when zooming in to capture still images, the image is really blurred and out of focus. is this a hardware issue and is there any solution for this?? or is my device faulty?

If you are using the iPhone camera zoom then remember that this is a digital zoom not an optical zoom. The zoomed in area will have fewer pixels and not appear as clear. The more you zoom the worse it gets. It's like cropping a picture after it has been taken.

I transfered a picture folder to my tc and now it occupies space on the tc but I can't open it. I there a solution for this?

I transfered a picture folder to my Time Capsule (3Gbit) from a external USB, drive thru my Macbook Pro, and now it occupies space on the Time Capsule but I can't open it. Is there a solution for this?

This is super fun with Yosemite.. that cannot open files on network drives..
Have you got the drive mounted in Finder?
Try and change the permissions of the folder in TC.. but I am not sure you are going to find this easy.
I think the best way to fix this is to copy the whole lot back to the external USB via the terminal using a full root login.
So open terminal.. type sudo su
Type in your main administrator password.
Then you can use any of the command line copy tools.. I have just done this with rsync..
The command is rsync -av /source/* /destination/
You should mount both the source and destination in finder.. and you can then drag the folder into the command line.. it will then copy the exact source and destination you want.

My boss is using Mac machine, whenever I send email from my windows machine he receives email as winmail.dat, is there any solutions for this ?

My boss is using Mac machine, whenever I send email from my windows machine he receives email as winmail.dat, is there any solutions for this ?
My boss is using Mac machine, whenever I send email from my windows machine he receives email as winmail.dat, is there any solutions for this ?

Upgrading my work PC is NOT an option, but I'd like my Mac to be able to recognise the attachment for what it is
Let see, you are using a proprietary file format that is only supposed to work with Outlook. It doesn't work for millions of Windows or Mac or Linux email users that depend on other email programs like Outlook Express, Thunderbird, Apple Mail, webmail, etc.
Microsoft has had to publish instructions so that their program's users can make themselves compatible with the rest of the world.
http://support.microsoft.com/kb/290809
You are causing your own problem by not making a simple change in your program's options. Changes in the Outlook preferences can be made either Globally or by the Recipient.
Follow these steps in Outlook 2007 to turn off TNEF:
1. On the Tools menu, click Options.
2. Click the Mail Format tab.
3. In the Compose in this message format box, click Plain Text or HTML, and then click OK.
Don't know of a better way to fix this problem for everyone concerned. Even if you get the fix to work with your machine, you will not enable all of the people receiving your emails to be able to work with you. That's a losing battle that's been caused by Microsoft.
Now if Microsoft created a Mail plugin for other email programs like they do for their video format's and services (flip4mac, Office Live Plugin, etc), then I would consider using their email program to deal with my clients. Until then, I need to be compatible with many different programs in other countries, on different platforms. Maybe that's going to change when they bring out the new Office 2011 with Outlook for the Mac...

HT5457 since I installed ios 6 on my iPhone 4S Siri has been verrrrrry slow - is there a solution for this?

since I installed ios 6 on my iPhone 4S Siri has been verrrrrry slow - is there a solution for this?

There is no issue with iOS7.
The issue is with specific iPhones.
I know multiple people with iPhones that have all upgraded to the latest iOS and none of them have experienced issues with the update across multiple models. Even with the postings here, if you search through them, some go back as far as iOS5 and these Wi-Fi/bluetooth issues occurring which clearly shows it is not the iOS update that is killing the hardware. The issue is with hardware on specific devices that is boarderline working and an update is causing the hardware to fail.
Apple offers an Out of Warranty replacement for a reasonable cost or the user can choose to replace the device with a different one (newer iPhone or some other device).
Regardless, ranting here is pointless and against the terms of use.

W.R.T OSS NOTE 339780-Is there a solution for ECC 6.0

Similar Messages

Maybe you are looking for