W1907 device driver not found
Bear in mind I'm brand new. With that said, I purchased a new system recently and in the process of setting it all up i was prompted to load the device driver for my w1907 monitor. Upon doing so I got the message that the software was found but a problem occured while trying to load it. Now everytime I reboot I get the Found New Hardware notice saying the driver needs to be installed. I try everytime and it does the same thing. I am using this monitor with no problems at this time, but I'm running a separate set of audio speakers so don't know if there's any sound issues. Should I try to find a solution to this? I went online to HP's support page and downloaded their driver, the same results. If it's not a big deal then how do I get the notification to stop popping up on reboot? The "don't ask this again..." about the driver install doesn't work. Any advice on this would be appreciated, Thanks in advance, oldschool
This question was solved.
View Solution.
This might be because you used the driver cd for the lcd which I recommend to never use.
Try going to Start, rightclick on computer and go to Properties, on the top left corner click Device Manager then when it comes up find Monitors, click on the plus sign, right click on the HP.....lcd and go to Update Driver Software, then choose Browse my computer for driver software, then on the top bottom click Let me pick from a lisr of drivers.... then click Generic PnP Monitor go next, wait a few moments, then click Close or Finish and restart the pc.
Let me know if it works.
Similar Messages
-
Can some one help me with diagnostic test result " apple mobile device driver not found"?
I bought an iPhone 4gs 32gb from Singapore. iso 4. I'm living in Chennai, India. To connect it to my computer (windows XP,), I have downloaded iTunes 10.6.1.7. Unfortunately iTunes is not recognizing my iPhone. I had tried to troubleshoot it by reinstalling iTunes (2 times). I have restarted the apple mobile device from control panel. I try connecting my iphone in another usb port. but no use. I don't know what am I missing?. iTunes opens on my computer. but doesn't recognize my device. when I click on help. it says an "unknown error has occurred. your computer is not connected to internet. please check your internet connection and try again later". I don't know what to do? could you please help me? thank you so much for your help and time.
when I update the usb driver (C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers.Double-click the usbaapl file.) I followed the procedure from this site. http://support.apple.com/kb/TS1538 when I finished, it says "the specified location does not contain information about your software"
I did the apple's diagnostics test on my computer. I'm pasting the result for your info.
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
System manufacturer System Product Name
iTunes 10.6.3.25
QuickTime not available
FairPlay 1.14.43
Apple Application Support 2.1.9
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 5.2.0.6
Apple Mobile Device Driver not found.
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0013AC2C08548378
Current user is an administrator.
The current local date and time is 2012-06-28 15:23:45.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
Intel(R) G41 Express Chipset
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {D85300A1-330D-41ED-AC5A-EC032B22FBF0}
Description: Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller - Packet Scheduler Miniport
IP Address: 192.168.1.3
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Thu Jun 28 15:17:19 2012
Lease Expires: Fri Jun 29 03:17:19 2012
DNS Servers: 192.168.1.1
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was unsuccessful.
The network connection timed out.
Basic connection to the store failed.
The network connection timed out.
Connection attempt to Gracenote server was successful.
The network connection timed out.
iTunes has never successfully accessed the iTunes Store.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.0.1),
G: Optiarc DVD RW AD-7220A, Rev 1.01
Drive is empty.
**** Device Connectivity Tests ****
iPodService 10.6.3.25 is currently running.
iTunesHelper 10.6.3.25 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) N10/ICH7 Family USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) N10/ICH7 Family USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) N10/ICH7 Family USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) N10/ICH7 Family USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) N10/ICH7 Family USB2 Enhanced Host Controller - 27CC. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.I have the same problem. I think that someone tried my iphone before me because when I want to reset it, I'm invited to enter a password that I didn't set. Also, when I go the Map application, the iphone indicate that I'm locateded in China while I'm in Tunisia. Now, I can't connect to my iphone to itunes, and I can't reset it because it ask me to enter a password that I didn't set.
This is my post:
https://discussions.apple.com/thread/4063223
Please, we need your help. -
My roommate gave me an old iPod Mini a few days ago. It was working fine 'til I plugged it into my computer and it asked me to format it. I did, and now it cannot be recognized by iTunes or my computer. My computer views it as a "removable disk" which cannot be accessed. In devices, it is listed as an Apple iPod though, so I'm hoping not all is lost. I have tried many quick fixes I've read on internet (including changing disk letter) but to no avail. I have reinstalled the new iTunes and now that is telling me it has not installed properly, and when I ran diagnostics, it reads that the Apple Mobile Device Driver not found. I will copy & paste all the info from the diagnostic run below, and if anybody can help me with my new (old) iPod, I'd be everly greatful!
Thanks!!
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
TOSHIBA Satellite L775D
iTunes 11.0.1.12
QuickTime 7.7.3
FairPlay 2.2.32
Apple Application Support 2.3.2
iPod Updater Library 10.0d2
CD Driver Not Available
CD Driver DLL 2.1.3.1
Apple Mobile Device 6.0.1.3
Apple Mobile Device Driver not found.
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number
Current user is not an administrator.
The current local date and time is 2013-01-08 11:16:27.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
ATI Technologies Inc., AMD Radeon(TM) HD 6520G
**** External Plug-ins Information ****
No external plug-ins installed.
**** Device Connectivity Tests ****
iPodService 11.0.1.12 (x64) is currently running.
iTunesHelper 11.0.1.12 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Standard OpenHCD USB Host Controller. Device is working properly.
Standard Enhanced PCI to USB Host Controller. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Most Recent Devices Not Currently Connected:
iPod mini running firmware version 1.4.1
Serial Number: JQ******S42
<Edited By Host>OMG same thing here; rather annoyed and now have set up accounts on 2 comps(both 64 vista ultimate); about to try my 32 bit vista on my lappy; we'll see... i don;t have high hopes thoush.
What i knew about iPhone before buying it:
What You Need
To use iPhone, you need:
A new two-year wireless service plan with AT&T
A Mac or a PC with a USB 2.0 port and one of the following operating systems:
Mac OS X version10.4.10 or later
Windows XP Home or Professional with Service Pack 2 or later
Windows Vista Home Premium, Business, Enterprise, or Ultimate edition
iTunes 7.3 or later, available at www.itunes.com
An iTunes Store account
An Internet connection
You must be at least 18 years old to open a new AT&T wireless account. You will need a
major credit card to open a new iTunes Store account.
Yeahyeah check all that stuff;
Oh well; just when i thought i'd finally cross over to the beautiful packaging of APPLE. I remember in design school that form follows function. Thanks.
Windows Vista -
Bluetooth peripheral device driver not found-samsung fascinate
I have a samsung fascinate and a brand new dell inspiron laptop. I cannot get these two together via bluetooth. The laptop states the "bluetooth peripheral device driver not found."
Are there any solutions for this?
Thanks!Sure! Try this: First, make sure you have activated Bluetooth pairing on your Fascinate. You can do this by going to your home screen, select Menu > Settings > Wireless & Networks > Bluetooth. Once Bluetooth is on, have your Fascinate scan for your computer by going to Bluetooth settings > Scan for devices. You might be able to pair them that way, instead of trying to find the phone using your computer.
-
Apple Mobile Device Driver not found. ...
Nor Itunes neither my PC can view my Iphone, what is more, it is completely discharged.. Here's the diagnostics...
iTunes 10.3.1.55
QuickTime 7.6.9
FairPlay 1.11.17
Apple Application Support 1.5.2
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.4.1.2
Apple Mobile Device Driver not found.
Bonjour 2.0.5.0 (214.3)
Gracenote SDK 1.8.2.457
Gracenote MusicID 1.8.2.89
Gracenote Submit 1.8.2.123
Gracenote DSP 1.8.2.34
iTunes Serial Number 0012B2100AAF8C28
Current user is not an administrator.
The current local date and time is 2011-06-30 20:40:04.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce GT 220M
**** External Plug-ins Information ****
Plug-in Name: MiniLyrics Visualizer
Plug-in Loaded: Yes
Plug-in Version: 0.8
Plug-in File Version: Unknown
Plug-in Path: C:\Program Files\iTunes\Plug-ins\iTunesMinilyrics.dll
Plug-in Name: Last.fm AudioScrobbler
Plug-in Loaded: Yes
Plug-in Version: 1.0.4
Plug-in File Version: 3.0.4.0
Plug-in Path: C:\Program Files\iTunes\Plug-ins\itw_scrobbler.dll
Genius ID: 46b8dbeb48d2ea73f185160d9ef3debd
**** Device Connectivity Tests ****
iPodService 10.3.1.55 is currently running.
iTunesHelper 10.3.1.55 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Note: I simply unnistalled all apple programms, when my Iphone had errors, and installed the newer version... Maybe it is the reason why my Iphone is not being seen...I have the same problem. I think that someone tried my iphone before me because when I want to reset it, I'm invited to enter a password that I didn't set. Also, when I go the Map application, the iphone indicate that I'm locateded in China while I'm in Tunisia. Now, I can't connect to my iphone to itunes, and I can't reset it because it ask me to enter a password that I didn't set.
This is my post:
https://discussions.apple.com/thread/4063223
Please, we need your help. -
Bluetooth Peripheral Device Driver "Not Found"
Hi Experts,
I am using a
HP Pavilion dv6-6093ex
Windows 7 64-bit operating system
i am having a problem with my bluetooth peripheral device driver. in device manager, under other devices, i see a yellow icon displayed beside bluetooth peripheral device. i tried to update it but it says "Windows was unable to install your Bluetooth Peripheral Device". When i click SCAN FOR HARDWARE CHANGES it refreshes the drivers and i get a balloon in my notifications area saying"Installing Device Driver Software" but after sometime it says "Bluetooth Peripheral Device No driver found"
what should i do???
can i uninstall this device from device manager???AbdulQuadeer wrote:
Hi Experts,
I am using a
HP Pavilion dv6-6093ex
Windows 7 64-bit operating system
i am having a problem with my bluetooth peripheral device driver. in device manager, under other devices, i see a yellow icon displayed beside bluetooth peripheral device. i tried to update it but it says "Windows was unable to install your Bluetooth Peripheral Device". When i click SCAN FOR HARDWARE CHANGES it refreshes the drivers and i get a balloon in my notifications area saying"Installing Device Driver Software" but after sometime it says "Bluetooth Peripheral Device No driver found"
what should i do???
can i uninstall this device from device manager???
What you need to provide is a P/N to verify what it has for driver.
How Do I Find My Model Number or Product Number?
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015- -
Windows 7 64 bit, Apple Mobile Device Service not found.
Hi First post, sorry sorry if this is in the wrong place
I have a dell Laptop running Windows 7 X64 and Apple Mobile Device Service is not installing and cannot be found in services.
note the account has Admin privildges (the logging below is wrong) and UAC and Virus protection has been switched off.
I have used the apple processes to uninstall everything and then reinstall multiple times. I am defintly trying to install the latest 64 bit version.
Microsoft Windows 7 x64 Home Premium Edition (Build 7600)
Dell Inc. Inspiron 1545
iTunes 9.0.2.25
QuickTime 7.6.5
FairPlay 1.5.23
Apple Application Support 1.1.0
iPod Updater Library 9.0d11
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device Driver not found.
Bonjour 1.0.6.2 (118.5)
iTunes Serial Number D67ADF69AA323879
Current user is not an administrator.
The current local date and time is 2010-01-11 16:46:14.
iTunes is not running in safe mode.
Video Display Information
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
** External Plug-ins Information **
No external plug-ins installed.
** iPod/iPhone Connectivity Tests **
iPodService 9.0.2.25 is currently running.
iTunesHelper 9.0.2.25 is currently running.
Apple Mobile Device Service not found.
Universal Serial Bus Controllers:
Intel(R) ICH9 Family USB Universal Host Controller - 2934. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2935. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2936. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2937. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2938. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2939. Device is working properly.
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293A. Device is working properly.
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293C. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
** iPhone/iPod Touch Sync Tests **
No iPhone or iPod found.
thanksI am having the same problem for three-four months now. When I called the help-desk of apple, they said windows 7 x64 wasn't compatible with itunes, and they told me that I had to wait for a newer version of itunes.
-
after downloading osx 10.9.2 when i open my logic pro 9 and begin to audition loops that came with lp9 i get a message that says "audio device has been removed and then a second message the " select driver not found(-10202). my interface is a apogee duet. Can anyone provide a solution to this problem. Thanks
YES!!! YES!!! YES!!!
I got it!!! Yes!!!
Guys, I've solved my problem about that error -10202 (Selected driver not found).
I have installed in my Mac Pro (OS X 10.5.8) a document with an extension ".rsrc" to correct the position of the accents in my keyboard, like acute accent, tilde and circumflex.
That file is called "U.S. - International.rsrc" and it's stored in the following path:
"Macintosh HD/Library/Keyboard Layouts"
So, when it's properly installed, I can choose 2 country flags on the right side of the menu bar (U.S. - International and Brazilian).
That's the clue!
When I pick up "U.S. - International", my keyboard works fine with the accents, >>>BUT<<< Logic Pro 9 doesn't recognize my audio driver; and when I pick up "Brazilian", my keyboard doesn't work with the accents exactly as it shows me on each key, BUT Logic Pro 9 DOES recognize my audio driver.
So, when I want to write anything out, I will pick up the "US - International" and when I want to work on the Logic Pro 9, I will pick up "Brazilian".
I hope I can help all of you.
Regards,
Renato Veiga. -
Core Audio: Selected Driver not found. (-10202) error message and speakers don't work
Apple just replaced my hard drive and now I'm noticing that I have no sound coming out of my internal speakers or earphone jack. When I try to use garage band I get the following error message:
Core Audio:
Selected Driver not found (-10202)
I read their article on the subject; I go to system preferences, sound then output devices where I'm supposed to select my device except there are none listed. I tried to fix the problem by reinstalling the operating system using the CD's that came with the MacBook Air but that didn't work either.
Here's the other problem, when I download the software update the update never loads. The status bar just sits there even when I let my pc alone over night.
Any suggestions??
FYI, i can't easily walk into a mac store for assistance.. gotta catch a plane to a different island.Update your Apogee and Symphony drivers to Mountain Lion versions...
But the bigger question is.. How did you install Mountain Lion on a G5? -
Drive not found in library database
Greetings.
I'm new to OSB and am having tape drive, volume problems.
File system backups only complete successfully when drive (IBM4_0_0_1_1) is used. When OSB attempts to use other drives in the library it logs the following errors listed in "Transcript".
I'm running OSB (10.4.0.3.0) on a Linux server (Oracle Linux Server release 6.0) with a SL500 library controller by a ACSLS(8.3.0) server.
Please advise.
Transcript:
2014/04/23.11:44:01 ______________________________________________________________________
2014/04/23.11:44:01
2014/04/23.11:44:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.11:44:01
2014/04/23.11:44:01 ---
2014/04/23.11:44:01 No volume could be found in SL500 (for drive HP6_0_0_3_1) to use for job admin/83.1.
2014/04/23.11:44:01 The problem using HP6_0_0_3_1 and the volume it contains, if any, is
2014/04/23.11:44:01 drive not found in library database (library manager)
2014/04/23.11:45:01 ______________________________________________________________________
2014/04/23.11:45:01
2014/04/23.11:45:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.11:45:01
2014/04/23.11:45:01 ---
2014/04/23.11:45:01 No volume could be found in SL500 (for drive HP5_0_0_2_4) to use for job admin/83.1.
2014/04/23.11:45:01 The problem using HP5_0_0_2_4 and the volume it contains, if any, is
2014/04/23.11:45:01 drive not found in library database (library manager)
2014/04/23.11:46:01 ______________________________________________________________________
2014/04/23.11:46:01
2014/04/23.11:46:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.11:46:01
2014/04/23.11:46:01 ---
2014/04/23.11:46:01 No volume could be found in SL500 (for drive IBM5_0_0_1_2) to use for job admin/83.1.
2014/04/23.11:46:01 The problem using IBM5_0_0_1_2 and the volume it contains, if any, is
2014/04/23.11:46:01 drive not found in library database (library manager)
2014/04/23.11:48:01 ______________________________________________________________________
2014/04/23.11:48:01
2014/04/23.11:48:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.11:48:01
2014/04/23.11:48:01 ---
2014/04/23.11:48:01 No volume could be found in SL500 (for drive HP4_0_0_2_2) to use for job admin/83.1.
2014/04/23.11:48:01 The problem using HP4_0_0_2_2 and the volume it contains, if any, is
2014/04/23.11:48:01 drive not found in library database (library manager)
2014/04/23.11:49:01 ______________________________________________________________________
2014/04/23.11:49:01
2014/04/23.11:49:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.11:49:01
2014/04/23.11:49:01 ---
2014/04/23.11:49:01 No volume could be found in SL500 (for drive IBM5_0_0_2_1) to use for job admin/83.1.
2014/04/23.11:49:01 The problem using IBM5_0_0_2_1 and the volume it contains, if any, is
2014/04/23.11:49:01 drive not found in library database (library manager)
2014/04/23.11:50:01 ______________________________________________________________________
2014/04/23.11:50:01
2014/04/23.11:50:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.11:50:01
2014/04/23.11:50:01 ---
2014/04/23.11:50:01 No volume could be found in SL500 (for drive HP5_0_0_2_3) to use for job admin/83.1.
2014/04/23.11:50:01 The problem using HP5_0_0_2_3 and the volume it contains, if any, is
2014/04/23.11:50:01 drive not found in library database (library manager)
2014/04/23.12:00:01 ______________________________________________________________________
2014/04/23.12:00:01
2014/04/23.12:00:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.12:00:01
2014/04/23.12:00:01 ---
2014/04/23.12:00:01 No volume could be found in SL500 (for drive HP6_0_0_3_1) to use for job admin/83.1.
2014/04/23.12:00:01 The problem using HP6_0_0_3_1 and the volume it contains, if any, is
2014/04/23.12:00:01 drive not found in library database (library manager)
2014/04/23.12:01:01 ______________________________________________________________________
2014/04/23.12:01:01
2014/04/23.12:01:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.12:01:01
2014/04/23.12:01:01 ---
2014/04/23.12:01:01 No volume could be found in SL500 (for drive HP5_0_0_2_4) to use for job admin/83.1.
2014/04/23.12:01:01 The problem using HP5_0_0_2_4 and the volume it contains, if any, is
2014/04/23.12:01:01 drive not found in library database (library manager)
2014/04/23.12:01:24 ______________________________________________________________________
2014/04/23.12:01:24
2014/04/23.12:01:24 Transcript for job admin/83.1 running on x4440a
2014/04/23.12:01:24
2014/04/23.12:01:25 ---
2014/04/23.12:01:25 No volume could be found in SL500 (for drive IBM5_0_0_1_2) to use for job admin/83.1.
2014/04/23.12:01:25 The problem using IBM5_0_0_1_2 and the volume it contains, if any, is
2014/04/23.12:01:25 drive not found in library database (library manager)
2014/04/23.12:04:01 ______________________________________________________________________
2014/04/23.12:04:01
2014/04/23.12:04:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.12:04:01
2014/04/23.12:04:01 ---
2014/04/23.12:04:01 No volume could be found in SL500 (for drive HP4_0_0_2_2) to use for job admin/83.1.
2014/04/23.12:04:01 The problem using HP4_0_0_2_2 and the volume it contains, if any, is
2014/04/23.12:04:01 drive not found in library database (library manager)
2014/04/23.12:05:01 ______________________________________________________________________
2014/04/23.12:05:01
2014/04/23.12:05:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.12:05:01
2014/04/23.12:05:01 ---
2014/04/23.12:05:01 No volume could be found in SL500 (for drive IBM5_0_0_2_1) to use for job admin/83.1.
2014/04/23.12:05:01 The problem using IBM5_0_0_2_1 and the volume it contains, if any, is
2014/04/23.12:05:01 drive not found in library database (library manager)
2014/04/23.12:05:21 ______________________________________________________________________
2014/04/23.12:05:21
2014/04/23.12:05:21 Transcript for job admin/83.1 running on x4440a
2014/04/23.12:05:21
Backup started on Wed Apr 23 2014 at 12:05:51
Volume label:
Volume tag: LEV018
Volume UUID: 203f144a-ad72-1031-9e4c-002128001bbe
Volume ID: mf_2min-000025
Volume sequence: 1
Volume set owner: root
Volume set created: Wed Apr 23 12:05:51 2014
Volume set expires: Wed Apr 23 12:07:51 2014
Media family: mf_2min
Original UUID: 203f144a-ad72-1031-9e4c-002128001bbe
Archive label:
File number: 1
File section: 1
Owner: root
Client host: x4440a
Backup level: 0
S/w compression: no
Archive created: Wed Apr 23 12:05:51 2014
Encryption: off
Dumping all files in /etc
Backup complete on Wed Apr 23 2014 at 12:06:03
Backup statistics:
status 0
devices IBM4_0_0_1_1
devices 1
volumes mf_2min-000025
voltags LEV018
file 1
host x4440a
encryption off
start_time Wed Apr 23 2014 at 12:05:51 (1398276351)
end_time Wed Apr 23 2014 at 12:06:06 (1398276366)
backup_time Wed Apr 23 2014 at 12:05:51 (1398276351)
entries_scanned 3373
kbytes_scanned 40556
entries_excluded 0
entries_skipped 0
mount_points_skipped 0
files 2047
directories 315
hardlinks 0
symlinks 1011
sparse_files 0
filesys_errors 0
unknown_type 0
file_kbytes 39264
dev_kbytes 35977
dev_iosecs 2
dev_iorate 18.4 MB/S
wrt_iosecs 15
wrt_iorate 2.5 MB/S
physical_blks_written 1102
write_errors 0
physical_blks_read 2
read_errors 0
error_rate 0%
path /etc completed, status 0
[root@x4440a backup]# obtool lsdev -lvg
SL500:
Device type: library (ACSLS)
In service: yes
Debug mode: no
Barcode reader: yes
Barcodes required: yes
Unload required: yes
Ejection type: auto
Min writable volumes: 0
UUID: e0b58224-a1a4-1031-8c0f-002128001bbe
Attachment 1:
Host: x4440a
ACSLS server: v215f
ACSLS port: 0
ACS id: 0
ACSLS access id: acsss
Reservation 1:
Component: obacslibd
Host: x4440a
Process: 32195
Element counts / addresses:
10 mte: 1 - 10
281 se : 1 - 281
1 iee: 1
1 dte: 1
Moves:
From mte, to: mte 0 se 0 iee 0 dte 0
From se, to: mte 0 se 0 iee 1 dte 1
From iee, to: mte 0 se 0 iee 0 dte 0
From dte, to: mte 0 se 1 iee 0 dte 0
Ok_ops: move=1, reserve=1 sense_dev=1, sense_ele=0, unload_any=1, sense_dev_range=0
State of barcode reader: enabled
IBM4_0_0_1_1:
Device type: tape (ACSLS)
In service: yes
Library: SL500
LSM: 0
Panel: 1
Drive: 1
Automount: yes
Error rate: 8
Query frequency: 131072KB (134217728 bytes) (from driver)
Debug mode: no
Blocking factor: (default)
Max blocking factor: (default)
Current tape: [unknown]
Drive usage: 14 minutes, 58 seconds
UUID: 179eb954-a1a5-1031-8c0f-002128001bbe
Attachment 1:
Host: x4440a
Raw device: /dev/sg18
Connection type: SCSI
Inquiry data:
Vendor: IBM
Product: ULTRIUM-TD4
Firmware: C7Q0
Serial number: 1310127325
Tape state: offline
Hardware compression: on
Last read was: uncompressed
Hardware encryption: available
Maximum block size: 2097152
IBM5_0_0_2_1:
Device type: tape (ACSLS)
In service: yes
Library: SL500
LSM: 0
Panel: 2
Drive: 1
Automount: yes
Error rate: 8
Query frequency: 131072KB (134217728 bytes) (from driver)
Debug mode: no
Blocking factor: (default)
Max blocking factor: (default)
Current tape: [unknown]
Drive usage: [not set]
UUID: 7498ff66-a1a5-1031-8c0f-002128001bbe
Attachment 1:
Host: x4440a
Raw device: /dev/sg16
Connection type: SCSI
Inquiry data:
Vendor: IBM
Product: ULTRIUM-TD5
Firmware: D8D4
Serial number: 1168002114
Tape state: offline
Hardware compression: on
Last read was: uncompressed
Hardware encryption: available
Maximum block size: 2097152
HP6_0_0_3_1:
Device type: tape (ACSLS)
In service: yes
Library: SL500
LSM: 0
Panel: 3
Drive: 1
Automount: yes
Error rate: 8
Query frequency: 131072KB (134217728 bytes) (from driver)
Debug mode: no
Blocking factor: (default)
Max blocking factor: (default)
Current tape: [unknown]
Drive usage: [not set]
UUID: cd20d3fc-a1a5-1031-8c0f-002128001bbe
Attachment 1:
Host: x4440a
Raw device: /dev/sg21
Connection type: SCSI
Inquiry data:
Vendor: HP
Product: Ultrium 6-SCSI
Firmware: J39S
Serial number: HU1233PPNN
Tape state: offline
Hardware compression: on
Last read was: uncompressed
Hardware encryption: available
Maximum block size: 2097152
IBM5_0_0_1_2:
Device type: tape (ACSLS)
In service: yes
Library: SL500
LSM: 0
Panel: 1
Drive: 2
Automount: yes
Error rate: 8
Query frequency: 131072KB (134217728 bytes) (from driver)
Debug mode: no
Blocking factor: (default)
Max blocking factor: (default)
Current tape: [unknown]
Drive usage: [not set]
UUID: 5b6cf420-a1a5-1031-8c0f-002128001bbe
Attachment 1:
Host: x4440a
Raw device: /dev/sg15
Connection type: SCSI
Inquiry data:
Vendor: IBM
Product: ULTRIUM-TD5
Firmware: D8D4
Serial number: 1068002447
Tape state: offline
Hardware compression: on
Last read was: uncompressed
Hardware encryption: available
Maximum block size: 2097152
HP4_0_0_2_2:
Device type: tape (ACSLS)
In service: yes
Library: SL500
LSM: 0
Panel: 2
Drive: 2
Automount: yes
Error rate: 8
Query frequency: 131072KB (134217728 bytes) (from driver)
Debug mode: no
Blocking factor: (default)
Max blocking factor: (default)
Current tape: [unknown]
Drive usage: [not set]
UUID: 8bd3659a-a1a5-1031-8c0f-002128001bbe
Attachment 1:
Host: x4440a
Raw device: /dev/sg13
Connection type: SCSI
Inquiry data:
Vendor: HP
Product: Ultrium 4-SCSI
Firmware: H64S
Serial number: HU1803168E
Tape state: offline
Hardware compression: on
Last read was: uncompressed
Hardware encryption: not available
Maximum block size: 2097152
HP5_0_0_2_3:
Device type: tape (ACSLS)
In service: yes
Library: SL500
LSM: 0
Panel: 2
Drive: 3
Automount: yes
Error rate: 8
Query frequency: 131072KB (134217728 bytes) (from driver)
Debug mode: no
Blocking factor: (default)
Max blocking factor: (default)
Current tape: [unknown]
Drive usage: [not set]
UUID: 9ee7dbd4-a1a5-1031-8c0f-002128001bbe
Attachment 1:
Host: x4440a
Raw device: /dev/sg23
Connection type: SCSI
Inquiry data:
Vendor: HP
Product: Ultrium 5-SCSI
Firmware: I67S
Serial number: HU19477NFE
Tape state: offline
Hardware compression: on
Last read was: uncompressed
Hardware encryption: not available
Maximum block size: 2097152
HP5_0_0_2_4:
Device type: tape (ACSLS)
In service: yes
Library: SL500
LSM: 0
Panel: 2
Drive: 4
Automount: yes
Error rate: 8
Query frequency: 131072KB (134217728 bytes) (from driver)
Debug mode: no
Blocking factor: (default)
Max blocking factor: (default)
Current tape: [unknown]
Drive usage: [not set]
UUID: b45b889e-a1a5-1031-8c0f-002128001bbe
Attachment 1:
Host: x4440a
Raw device: /dev/sg24
Connection type: SCSI
Inquiry data:
Vendor: HP
Product: Ultrium 5-SCSI
Firmware: I67S
Serial number: HU19477NBF
Tape state: offline
Hardware compression: on
Last read was: uncompressed
Hardware encryption: available
Maximum block size: 2097152
[root@x4440a backup]#
[root@x4440a backup]# obtool lsvol -L SL500 -l
Inventory of library SL500:
in 1: barcode F50216, oid 100
in 2: barcode I50116, oid 101
in 3: barcode LEV008, oid 102, mediainfo hw encryptable
in 4: barcode LEV010, oid 103, mediainfo hw encryptable
in 5: barcode LEV017, oid 104, mediainfo hw encryptable
in 6: volume mf_2min-000025, barcode LEV018, oid 155, 781232128 kb remaining, expired, mediainfo hw encryptable
in 7: barcode LEV049, oid 106
in 8: barcode LEV058, oid 107
in 9: barcode PQ4196, oid 108
in 10: barcode PQ4883, oid 109
in 11: barcode S50282, oid 110
in 12: barcode S50290, oid 111
in 13: barcode S50291, oid 112
in 14: barcode S50292, oid 113
in 15: barcode S50300, oid 114
in 16: barcode S60111, oid 115
in 17: barcode S60113, oid 116
in 18: barcode SF6410, oid 117
in 19: barcode SF6411, oid 118
in 20: barcode SF6412, oid 119
in 21: barcode SF6413, oid 120
in 22: barcode SF6414, oid 121
in 23: barcode SF6416, oid 122
in 24: barcode SF6417, oid 123
in 25: barcode SF6418, oid 124
in 26: barcode SF6419, oid 125
in 27: vacant
in 28: vacant
in 29: vacant
in 30: vacant
in 31: vacant
in 274: vacant
in 275: vacant
in 276: vacant
in 277: vacant
in 278: vacant
in 279: vacant
in 280: vacant
in 281: vacant
in iee: vacant
in dte: vacant
[root@x4440a backup]#Rich
Thanks for your response.
ACSLS is part of the configuration requirements I need to have in this OBS environment.
I'm going to re install OBS just to see if anything changes.
Thanks again.
Update:
When configuring devices in OSB that are ACSLS in nature it is a requirement to restart the obacslibd after mkdev or certain chdev commands are preformed.
After the daemon was restarted I was able to use the attached tape drives. -
Network controller& USB controller driver not found and wifi not working
hello I Purchased HP 15-ac025TX (M9V00PA) Notebook laptop . i have installed all driver from HP site here is the link http://support.hp.com/in-en/drivers/selfservice/HP-15-Notebook-PC-series/7771404/model/8326084#Z7_3054ICK0KGTE30AQO5O3KA30R1 but still netwok controller driver not found also wifi not working i installed blutooth drivers too . I am using window 7 sp1 (32 bit) For network controller device ID is PCI\VEN_14E4&DEV_4365&SUBSYS_804A103C&REV_01 secondly univeral serial bus driver(usb) controller not found i installed all drivers from above link also update windows but still no solution hardware id of usb controller is PCI\VEN_8086&DEV_9CB1@SUBSYS_80C2103C&REV_03 and last i am unable to download AMD/Intel Switchable High-Definition (HD) Graphics Driver. the download link not working KINDLY RESOLVE THE ISSUE THANK YOU
Update: While the driver I knew would work has not shown up yet, I did some detective work and explored some other broadcom wireless card driver folders from some HP links, and I found one that should work for you. While it says it is for HP desktop PC's, they put the exact same wireless card form factor in a desktop PC that they do in a notebook PC. I see no reason why this driver would not work, since the setup information file contains the same hardware ID that you posted. Here is a partial copy and paste of the driver setup information file and you can see the hardware ID you posted is supported by this driver. x86 - Win7
[BROADCOM.NTx86.6.1]
%BCM430N_DeviceDesc% = BCM43XNG_NT61, PCI\VEN_14E4&DEV_4365&SUBSYS_2230103C
%BCM430N_DeviceDesc% = BCM43XNG_NT61, PCI\VEN_14E4&DEV_4365&SUBSYS_22D3103C
%BCM430N_DeviceDesc_HPY% = BCM43XNG_NT61, PCI\VEN_14E4&DEV_4365&SUBSYS_2232103C
%BCM430N_DeviceDesc_HPY% = BCM43XNG_NT61, PCI\VEN_14E4&DEV_4365&SUBSYS_22D4103C
%BCM430N_DeviceDesc_HPY% = BCM43XNG_NT61, PCI\VEN_14E4&DEV_4365&SUBSYS_804A103C http://h20566.www2.hp.com/hpsc/swd/public/detail?swItemId=cp_149257_1 -
Sony MDR-zx550bn driver not found installing on Windows 7.
I keep getting "driver not found" when trying to install my headphones on a Windows 7 computer.
Hi richardph22,
Welcome to Sony Community!
Possibly the driver/s (Bluetooth or Audio) is not properly installed or, for some reason, deleted on your computer. Kindly follow the troubleshooting guidelines here:
If you're trying to connect your headphones to your computer via Bluetooth, please follow these steps:
Reinstall Bluetooth driver -> Go to Device Manager -> Bluetooth -> right click and Properties -> Driver tab-> select Uninstall (DO NOT DELETE) -> restart the computer. The driver will be reinstalled. NOTE: If Bluetooth is not listed, check under Network Adapters -> Bluetooth. Or Click View -> Show hidden devices.
Download or update Bluetooth Driver -> visit the support page (website) of your computer and download the Bluetooth driver.
If the headphones plugged in to the computer via headphones jack, kindly follow these:
Reinstall Audio driver -> Go to Device Manager -> double click Sound, video and game controllers -> right click and select Properties -> Driver tab -> Uninstall the driver/s (DO NOT DELETE) -> Restart the computer. The driver/s will be reinstalled. NOTE: If Audio is not listed, click View -> Show hidden devices.
Download or update Audio Driver -> visit the support page (website) of your computer and download the Audio driver.
Hope these help.
Regards,
Vincent
If my post answers your question, please mark it as "Accept as Solution"
-
PSE Backup wouldn't work: "CD device driver not installed; install PSE" didn't fix problem; Win7
I'm trying to backup by photos for the first time! in Photoshop 5.0 on a Windows 7 system. I get to "Full Backup" option, and get a pop-up that says "CD device driver not installed; reinstall PSE". I put my PSE disk into my computer, select "Repair... installs... missing files"; PSE re-installs, but I get the same message again when I try to backup. How do I find a CD device driver? (My DVD is formatted, but PSE can't find it.)
I just found a photoshop elements 5.0.2 update "patcher" and installed it. The install was successful but I still got the same message saying "CD device driver not installed". Might there be a problem since I'm now on Windows 7 and no longer on XP? I have no need to buy a newer version since Elements 5.0 does everything I need to do. Any other suggestions?
-
JDBC Driver not found when connecting to Data Federator XI 3.0 SP3
Hello,
I am trying to connect Crystal 2008 to Data Federator however I am getting the Error
Failed to open connection.
Details: JDBC Driver not found.
The JDBC Drivers are installed and working for the Universe Designer, however I am unable to get it working for Crystal. I am using the following connection parameters on Crystal:
Connection URL: jdbc:datafederator://<<servername>>:3055/<<catalog>>
Database Classname: com.businessobjects.datafederator.jdbc.DataFederatorDriver
Any Advice on what I may have missed?The issue was solved, thanks to Patric Wan:
u201CFailed to open the connection. Details: JDBC driver not found.u201D
This means Data Federator JDBC driver was not added to:
C:\Program Files\Business Objects\common\<version>\java\CRConfig.xml
How to connect the Data Federator Server using JDBC?
1. Retrieve the following files from the machine where Data Federator is installed, from the directory [data-federator-installation-dir]/JdbcDriver/lib.
- thindriver.jar
- avalon-framework-4.1.5.jar
- jacorb.jar
- log4j-1.2.8.jar
- logkit-1.2.jar
2. Copy these files to a directory of your choice ([your-jdbc-driverdirectory]).
3. Add [your-jdbc-driver-directory]/thindriver.jar to CRConfig.xml <Add to Classpath tag, you can refer to original sample.CRConfig.xml should be at: C:\Program Files\Business Objects\Common\4.0\java\CRConfig.xml, or search your BOBJ products install to find this file>
4. URL: jdbc:leselect://<host>[:<port>][/[<catalog>]][[;param-name=value]*]
Class Name : LeSelect.ThinDriver.ThinDriver
Edited by: Craig Sander on Feb 12, 2011 8:22 PM -
My iPad mini says to connect to iTunes, and I try to restore it, but after its done extracting a message comes up saying that device is not found, is there anyway i can fix this? I don't care if i don't get my stuff back, i just want my iPad restored to its starting settings.
If everything else that you try fails, I would try using another computer. Since you don't care about saving any data, any computer that is running the latest version of iTunes might be able to restore the iPad. You could make an appointment at an Apple Store Genius Bar and they can do it for you.
If that isn't feasible for you, try using a different cable, a different USB port. reboot the computer, and reset the iPad by holding down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears on the screen. Then try again.
Maybe you are looking for
-
When I open firefox I get a message that "A copy of Firefox is already open. Only one copy of Firefox can be open at a time" Nothing I have tried fixes the problem
-
How do I search for a file I can't locate?
-
Hi I'm hoping someone here can help me. I want to run a Mac box and a Windows box side by side using one Monitor, one Mouse and one Keyboard. I have a Mac Keyboard and Mouse (Mighty Mouse) and a 23" Apple Monitor. I found a KVM Switch that will take
-
Insert internal table fieldname into itab
Hi, I want to download data into a textfile with the fieldname of an internal table as the header line. What would be the easiest way of doing that ? For eg. PERNR BEGDA ENDDA <-- is the Header 10000000 20070101 99991231 <-- is th
-
Parent Child dropdown list in ColdFusion
Hi, I'm looking a CF/Javascript code with a functionality to show a parent dropdown list (ex. Country) and depending on the selected Country, need to show the child (State) dropdown list. Thanks.