W2207 volume problem?

Hi there, i was wondering if anyone could help me with a problem im having... it seems like my volume button/settings are stuck on my monitor.  It flashes on and off changing the volume (reducing it always) but it is getting worse and i cant get rid of the screen which is right in the middle of my display.  I tried wiggling the buttons to see if they were stuck but i dont think that is the case.  Can anyone give me a suggestion on what to do?

The problem is the PC board that controls the Menu, Volume and Select buttons. I do not use these buttons so I removed the trim ring and unplugged the board. Problem solved.

Similar Messages

  • Anyone know when Apple will bring out a patch to fix the volume problem you get on mac mini after downloading OS 10.8.5

    Anyone know when Apple will bring out a patch to fix the volume problem you get on mac mini after downloading OS 10.8.5?

    Only Apple knows the answer to whether or not there is a verified problem and if so when will a fix be released.  As is their custom, Apple does not talk about these things and the rules of these communities prohibit speculation about future udates or upgrades. It is probably safe to say if a fix is deemed necessary it will be called OS X 10.8.6.

  • Trying to backup despite Volume problems

    I appear to have some volume problems with my internal HDD.
    When I try to diagnose and fix it with Disk Utility the error is:
    "Incorrect number of thread records" & "Invalid volume directory count"
    Though the volume needs repairing, disk utility can't do it (nor can TechTool Pro http://www.micromat.com/index.php?option=com_simpleboard&Itemid=42&func=view&id= 525&catid=6)
    Since I can't fix it I think I understand that it would be best to back things up, reformat the drive.
    My question is esssentially academic. Would backing things up copy the volume problem I'm experiencing? or would it even allow me to copy things correctly? And how does one know what file was damaged or corrupted?

    Good questions. Repairing the HD problem is something Disk Warrior could possibly correct. It's the best app. for resolving directory problems.
    Did Disk Utility specifically tell you that it couldn't fix the drive, or did it simply report the error. If it's the latter, I would rerun Disk Utility as many times as necessary to get a clean run (no problems). This may not be possible given what was reported in your Micromat referenced link, however, it's worth a try.
    Given the current state of the directory, you would not be able to create a clean clone backup of the drive. I suspect you would see an error during the copying. You could though drag/drop specific folders/files to the drive to the extent your HD cooperates. IMO, a "must" for any maintenance strategy.
    Do you have a current cloned backup of your system. If you do, you could always copy it over the existing drive. If it is "somewhat current", you could drag/drop important data files on your computer's HD to either external media or another parition on the external, then recopy the clone to the HD. Afterward, move the data files back to their original locations.

  • Audio volume problem in Premiere elements 12

    How can I reduce or increase volume in the soundtrack???

    Sorry for my English but I hope you understandthe following.
    I have for the moment no time to go through your comments and ideas, but I certainly will do the coming days.
    For good order I’ll explain my problem more in detail: (working with Window’s 7)
    When I use Tools>smartmix, I change Audio 1 in “forground”, Comments in “foreground”, Soundtrack in “Background”, Audio 2 and 3 in “Background”. So far so good!.
    Next step is: edit>preferences>audio>smartmixer, and the only thing I can change is “milliseconds (i.e. 10)”, “mix pause (i.e. 5 sec)”, and “reduce background in % (i.e. 90%)”. So far so good again!
    The volume sound  of the audio track is indeed reduced when there is a conversation in the clip, but not enough, so still too loud, certainly when the conversation stops, the volume sound is far too loud.
    What do I want:
    a)      Remain the original volume from the conversations etc. in the clip, so don’t change anything in here.
    b)      Reduce the volume to the level I like!
    I realise, this looks an easy and simple question, but I can’t fide out  hou too lower only the volume in a soudtrack!
    Waiting your reply and many thanks in advance
    Regards
    P.Gans
    Van: A.T. Romano [email protected]
    Verzonden: vrijdag 10 januari 2014 4:05
    Aan: Maauwtje22
    Onderwerp: Audio volume problem in Premiere elements 12
    Re: Audio volume problem in Premiere elements 12
    created by A.T. Romano <http://forums.adobe.com/people/A.T.+Romano>  in Premiere Elements - View the full discussion <http://forums.adobe.com/message/5999094#5999094

  • Volume problem in IOS x Yosemite

    Hi ,
    I have problem in the  volume when I download x Yosemite , the volume icon in keyboard not appear instead it take a way the window that Im open up .
    ( this happen when I click decrease  volume  , but when I click mute or increase volume nothing happened ) in all it doesn't appear in display icon sound .
    My laptop is Mac book pro retina 13 inch mid 2014 :
    The processor is 2.6 GHZ Intel core i5
    Memory : 8 GB 1600 Hmz
    version of Yosemite os 10.10.2
    When I was download it to took me a lot of time .
    What suggestions that could help the volume problem ??

    Below are several links which you may like to try the various solutions as listed
    os X yosemite keyboard volume not working
    http://www.iphonetopics.com/no-sound-after-upgrading-to-os-x-yosemite/
    http://apple.stackexchange.com/questions/151045/why-is-the-audio-is-not-working- after-upgrading-to-yosemite
    http://apple.stackexchange.com/questions/152649/sound-not-working-when-running-o s-10-yosemite

  • IPod Shuffle 3rd Gen - Volume problems

    I have an iPod Shuffle 3rd gen.
    This week it started to develop a problem that I am not able to turn the volume uo or down.
    I tested with another earphone and a brand new earpod (that are working properly in an iPhone 4S).
    I also tried to restore the iPod. And this have note hekped me.
    What should I do to fix this volume issue?
    Thanks

    Hey paralelopipak,
    Thanks for the question. After reviewing your post, it sounds like the headphones have a volume problem only on this iPod. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    Resetting iPod shuffle
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • Iphone 3gs Speaker Low Volume Problem.

    I Have Iphone 3gs. When I Updated It To 6.1.3 The Speaker Low Volume Problem Starts. When Anybody Call us It Rings But When We Accept The Call The Low Voiume Problem Starts. So Please Help Me To Fix This Problem.

    Nope. Can't say that it does. I think I have about 100 charge cycles on it and it still performs like near new. How long have you had your 3GS?

  • Continuing Speakerphone Volume Problem

    After anxiously waiting three months for a firmware/software update that would fix the speakerphone volume problem I updated my two iPhones to v. 1.1.1. Unfortunately, neither of my iphones showed any increase in speakerphone volume.
    We spoke to an Apple employee at our nearest Apple store (also the biggest and busiest Apple store in our area), and found out that if we wanted a speakerphone that we could use we should bring the phones in and have the Genius verify the low volume and give us a "part substitution" (which meant an opened iphone).
    Instead (for various reasons) we decided to buy another IPhone, figuring "what are the chances that we would get three iPhones with very low speakerphones?" Also figuring that this very busy Apple store would have the latest IPhones available, with the speakerphone volume fixed. Apparently three is not the charm. Our new iPhone's speakerphone volume was just as low as our other two iPhones.
    And our newest iPhone had the 1.1.1 update on it from the start. So I guess we will now try option (1).
    For those of you who have had problems with the speakerphone volume and brought the IPhone back to the Apple store, were you able to find one with good speakerphone volume? I sure hope so!
    Thanks!
    Ashley

    When people started complaining initially about the speakerphone issue. I brought my phone to my local Apple Store and the guy at the Genius Bar and I compared the speakerphone volume with the display phones. We did notice that mine was quieter than the rest. Because my phone was past the 14 day return period, my phone was sent out.
    In all honesty, if there was an improvement, I would say it's very minimal. Long story short, I was able to swap out my phone for a brand new one and the speaker volume is relatively the same. Did the firmware 1.1.1 make it any louder? Not really. What I do notice is that the alert volumes have improved and that volume went up. But the speakerphone volume remained unchanged.
    Personally this phone wasn't built for speakerphone use and you'll do better buying a bluetooth headset or a speakerphone instead. It's acceptable in a quiet environment but trying to use the speakerphone in public is out of the question.

  • IPod Touch 2nd gen 4.2 update volume problems

    I just updated my 2nd gen ipod touch and the volume no longer works. The volume buttons dont work, when I play music or a video theres no volume bar underneath the play/pause control. The volume will only work when I have headphones plugged into the ipod but when I unplug the headphones the volume bar disappears. Any solutions???

    I have 4.2 also. I was having sort of the same problem. My problem was the volume bar appeared but in some apps it was useless. Visit settings sounds you should see the volume slider. Under that it will say change with buttons. Make sure it says on. Hope this helps.
    Caleb

  • Itunes 11.1.2 Volume problem

    Music volume output from itunes to usb Soundsticks rig is less than half the level before update and probably distorted if I coul heat it
    Sound from Safari sounds fine

    As a matter of fact: I, as usually when prompted, installed the update. MacPro went very slow and eventually froze. Couldn't start other programs. Installation bar didn't proceed even after many minutes. No internet connection problems. Had to shut down and reboot computer. Same procedure since. Tried new install (no update) from APPLE.COM/ITUNES/DOWNLOAD but same thing. Computer slows down but now at least doesn't freeze. A message appaers after many minutes "Failure, contact software supllier". Starting ITunes reults in message: "File dammaged". However I can;t remove the 'old' ITunes.
    I'd be glad with any help.

  • Iphone 4s bluetooth volume problems through Alpine HU

    Having trawled through numerous reports of bluetooth problems with the 4S I have not found one which replicates my issue although I could have missed it.
    Essentially I think my query boils down to " Does the 3GS output music, via bluetooth at a higher level than the 4S, assuming both using IOS5.0.1" .Because my new iphone 4S is much much quieter than my old 3gs and I want to establish whether this is a software problem or a faulty unit.
    For the last couple of years I have been using a 3GS which paired perfectly with my Alpine CDA-9887/Bt400 stereo in the car, handled calls well and when playing music via the bluetooth input ( which it did exceptionally well) it was at the same sound level as the other inputs for a given vol setting, i.e. I could switch from radio, to disc to bluetooth withouth changing the volume.
    Having just changed to an iphone 4S I have found that although the unit pairs ok and seems to handle calls well enough (although rather mushy sounding compared to 3GS) it is very quiet when using the ipod function via bluetooth.
    Volume and sound quality are very subjective I realise but to give an indication of the problem, the Alpine head unit has a volume scale from 0-39. On all inputs (except with the 4S) a volume of 5 is fine for spoken voice, 12 good for music on the move 21 is very very loud pushing the cars speakers to the limit. These levels are approx the same when playing music through an iphone 3GS and an ipod touch via bluetooth.
    By contrast the iphone 4S is inaudible at vol 5, needs 20 to be listenable to on the move and even at vol 39 sounds thin and about as load as a 3GS at vol18  so ful vol not possible from my iphone 4S
    The main problem with this is that if you are listening to music from the iphone 4S then switch to the radio without remembering to drastically reduce volume it is likely to result in damage to the speakers and/or your eardrums. The problem is compounded as I use the TomTom app regularly and this exibits the same problem, the volume needs to be very high for instructions and then if I change input to listen to the news....ouch.
    I have tried 2 iphone 3GS's and an ipod touch on this Alpine unit and they all work perfectly, being able to maintain the same output for a given HU vol level as the radio etc. I have tried increasing the bluetooth volume on the 4S handset, have tried clean restore to see if there is some obscure problem with my backup all to no avail.
    Has anyone upgraded from a 3GS to a 4S and found the music level in a car via bluetooth much quieter, the same or louder and does this sound like a hardware problem.
    thanks.

    Funny Apple told me to eat **** and call my car place.
    HELP !!!
    It’s not like we are working with Samsun here. They should have thought it out fixed all the bugs then went ahead. I am...... ******!  My 3 week old Volkswagen Tiguan no longer plays my MUSIC nor my Audible. Its so not ok. This is a breach of contract. I am told by apple you don’t have to update but my carrier said just the opposite our phones will not work without the updates...
    Apple get you crap together, I had such respect you. You have let a lot of apple fans down.
    A very ****** ex Apple Fan

  • Strange volume problem on Logic pro 8.0.2

    Hey, I've been having this weird problem for a while and I'm not sure how to get rid of it. Basically, I start a new project lay down some audio tracks as well as software tracks and everything works fine. Then randomly, when I open a new audio track the volume is all screwed up.
    I'll explain, when I play into it normally it comes out at normal volume, however when I record it plays back at a volume so low it's barely audible. Other things I've noticed is that the volume on the mixing desk no longer has any affect on the volume of my sound on that track, also soloing the track makes it play at the volume that it comes out when recorded (i.e almost silent). -(this problem then occurs on every audio track I open afterwards)
    1.I've also got a list of things I know it's not. I know it's not my sound card because I've used two different ones and the problem re occurs.
    2.I know it's not my computer because it happens on both my lap top and my desk top.
    3.I know it's nothing to do with the speakers, or FX pedals I'm using.
    Theres no difference between the way I'm opening the new track and the way I have opened previous ones (that worked fine) in the project. Oh yeah, and the most weird thing is I after the problem occurs it happens on every new track I open.
    So at the moment audio tracks 1, 2 and 3 all work fine. But I've tried opening more and more tracks and all of them have this problem.
    Someone please help, it's bloody infuriating when I'm half way through a song. Thank you very much.
    Alex

    There are separate volume settings for a track when it's record-enabled and when not (the same fader).
    This is so that you can have different relative volumes during recording to help you play the part, without affecting the mix you've already set up for playback.
    Could it be that this is tripping you up?

  • Volume problem with Music Player on N95

    Hi all,
    I am puzzled with a problem I'm having with my N95. The problem appeared after I performed an upgrade on the phone. 
    The thing is that the right side Volume keys do not work when using the Music player. I know the keys work since the zoom is working on the camera (the same keys). But what is really weird is that if I use the File Manager and open a music file, hence opening the Music player then the Volume keys work fine. 
    The problem is when I access the Music player either by the Media button on the handset or via the Menu > Music > Music Player.
    This is driving me nuts I have tried to update the firmware with the same load without success, I just updated the firmware to the latest version V 30.0.018 hoping that it would be fixed but it didn't
    Anyone have the same problem??
    Thanks,

    Hi pavelosk,
    I solved the problems on mine. It wasn't easy and is not a straightforward solution. After several attempts everything is ok now. I had to restore the phone to original settings. But also you need to remove all media in the phone. Somehow when the files or links to files are corrupted (often by downloading music via PC suite) this in turns gets the phone in this weird status. It is best to download music files to the phone via a data transfer.
    Anyways you need to make sure all music files are deleted and that from within the music player library you cannot see any music file. It must state 0 Music files.
    Once you have got rid of this, then I had to load the firmware several times until it worked. I am not sure but it happened to me that there was a new firmware available, but it didn't fix it on it's own. I had to remove the files and re-flash it like 4 times before the issue dissappeared. I know it isn't a step by step guide. But no one else knows what the problem is exactly. I am happy I managed to fix mine (after more than 4 month of trying!!!) 
    Good luck.

  • Volume problem while watching videos

    Flash player 11.8.800.94, Windows 7 (64-bit), Internet Explorer 10.
    Updated to the latest version of flash player, my volume is way too low while watching a video on youtube for example, same problem with twitch.tv, dailymotion.com etc
    I have to tune up the volume of my speakers nearly to the max if I want to hear anything from the video, when I uninstall flash player, the volume is normal again, equal to my standard volume of my pc.
    I reinstalled the flash player but the problem remains.
    I also did everything for IE 10 http://helpx.adobe.com/flash-player/kb/flash-player-games-video-or.html#main_Flash_Player_ information
    Is there any solution to this problem?
    Greets

    Can you try to see if it work OK with 11.7? We would know if we  introduced new issue with 11.8.
    http://forums.adobe.com/thread/889580?tstart=0

  • Satellite Pro T110 - speaker volume problem

    How do I increase the volume of the speakers in my T110?
    Ive read other forums that suggest thats just the way it is but that cant be right - its impossible to hear on max.
    My partner has a Toshiba NB300 (much smaller) but the speaker volume is much better.
    Is it a common problem with T110 buyers?
    Is there a fix PLEASE?

    Hi buddy,
    I never saw any other forums where people talk about low volume on Satellite T110 I also have this model and the sound volume is ok for this small and ultra portable notebook.
    I think you want to increase the volume when watching movies or listen music, right?
    Well, in this case I would recommend using VLC media player. In my opinion its the best freeware player and using it you can improve volume compared to Windows media player.
    Have a look on Google to find it. Its freeware tool so I dont think its a problem to find. ;)
    Check this!!!

Maybe you are looking for