W2K server w/PCI CAN cards freezes. Any ideas?

We are running a pick-to-light system on the CANbus and the server locks up for no reason. Only recovery is to restart.

Thanks for the response,
We're not sure what the issue is at this point. The computer is running pick-to-light software through the CANbus and carousel software through the network card. We have multiple sites running the carousel software alone and have not seen this situation before until we started installing the pick-to-light software.
I am attaching a Zip file to this with a snapshot of the NI-CAN System info. I am not sure we are running the latest version of the NI-CAN driver at this site. The server has Windows 2000 SP4. Perhaps your idea of re-applying the SP4 is a possible solution. I am going to the Dell support site to see if they have any reports of freeze-ups like we are experiencing.
Thanks for the help,
David
Attachments:
NICAN_versions.zip ‏103 KB

Similar Messages

  • Are there any PCIE CAN Cards Compatible with Labview RT?

    Hi,
    I am looking for a mini PCIE CAN card or PCIE 1X CAN card that will run under Labview RT.  Are any of you using a PCIEC AN card with Labview RT?
    Thanks,
    Phillip

    Hello Phillip,
    I do not believe that we have any PCIe CAN cards. Here is a link to the PCI CAN cards that will work on LabVIEW Real Time(http://sine.ni.com/np/app/main/p/bot/no/ap/icomm/lang/en/pg/1/sn/n24CI,n21:17,n17:icomm,n19:Real%20T...). Please let me know if you have anymore questions. Have a great day!
    Best Regards,
    Adam G 
    National Instruments
    Applications Engineer

  • How do I get my PCI-CAN card to work in my Dell computer?

    I am trying to get a PCI-CAN card working in a Dell GX110 computer. The computer quits right after the initial Dell spalsh screen goes away. After that point, I only get a flashing cursor in the top left corner. NI support suggested a bios upgrade, but the computer is already at the latest bios rev. When I remove the card, the computer boots fine. What do I try next?
    Lars

    The problem may be related to a specific chip ( MITE) on the PCI CAN card. Please call us at 512-795-8248 with the part no and the serial of the PCI CAN card, so that we can verify whether the CAN card may have a hardware problem and have you send the card back to us for repair or to get a replacement.

  • Will PCI-CAN card work with only 2 wires?

    If I'm using my PCI-CAN card configured for internal power, do I need to connect anything other than CAN-L & CAN-H to my CAN network? I'm doing this right now and am able to correctly receive packets thru the card. However, it appears that my transmitted packets are not being seen by the other nodes. I'll know more when my CANalyzer arrives, but I was wondering if my cabling is OK as-is.

    I currently have a connection set up with only CAN-L and CAN-H wires connected. I am able to transmit and receive with no problems at 500kbs, so it should work as long as the lines are properly terminated. (120ohm resistor bridging the wires at both ends)

  • IS THE APPLE SERVER DOWN I CAN'T DOWNLOAD ANY THING

    IS THE APPLE SERVER DOWN I CAN'T DOWNLOAD ANY THING

    Is your iPad restricted?
    Check Settings > General > Restrictions

  • Aspire 6920 crashes after booting correctly - screeen zig zags and freezes - any ideas to help plse?

    My aspire 6920 crashes after booting correctly - screen zig zags and freezes - any ideas to help plse? This does not happen in safemode which I am working in now - I have seen a list of dowloadable drivers on the acer site but not at all sure if I should download any. If laptop is really on its way out I will have to let it go - but I would appreciate any advice to extent its life,  Thanks

    Many thanks - relieved that it can be done but I am very unconfident that I can do this - is the display driver the display adapter in Vista? Not at all sure how to install new driver from Acer site - Could I use 'Drivers for free' download - I tried to set up an account with them after seeing their free download on CINET but not able to from 'safe mode' and laptop crashes when I try to do anything ( after about a minute ) in ordinary mode.  Any further advice welcome, thanks

  • HT2305 When I am trying to update my iPad 2 via syncing it with my PC, I get the following error message: "iPad software update server could not be contacted." Any ideas?

    When I am trying to update my iPad 2 via syncing it with my PC, I get the following error message: "iPad software update server could not be contacted." Any ideas?

    Try rebooting your router and or cable modem. Unplug it/them for about 30 seconds and then plug back in. See if it works then. Reboot your iPad as well.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • The share button disappeared from my Facebook add-on just before I upgraded to Firefox 5.0. I thought by upgrading and reinstalling the add-on it might come back, but it didn't. All other FB buttons are there, near as I can tell. Any ideas? I'm using XP3.

    The share button disappeared from my Facebook add-on just before I upgraded to Firefox 5.0. I thought that maybe by upgrading and reinstalling the add-on it might come back, but it didn't. All the other FB buttons are there, near as I can tell. Any ideas? I'm still using XP3.

    Hello,
    I had the same problem with finding this file.
    There's no such file in Mac OS X version of Skype. But there's a directory for your Skype user account in /Users/%current_user_name%/Library/Application Support/Skype/
    try:
    quitting Skype
    renaming old folder
    signing into the Skype

  • My ipad 1st gen has loads of coloured lines going across the screen so I can't see any ideas ?

    My ipad first gen has loads of coloured lines going across the screen so I can't see any ideas ??

    Try a reset: Press and hold both Sleep/Wake and Home buttons until the Apple logo appears.
    If that didn't fix things, do a restore:
    http://support.apple.com/kb/HT1414
    If that still didn't fix the issue, then there is probably a hardware problem.

  • I was Updating my Iphone 4s to iOS 6 through itunes. an error happended now iphone stuck on connect to itunes logo screen .  tried tukrning on and of it connects but itunes does not recognize so i can restore .. any ideas?

    I was Updating my Iphone 4s to iOS 6 through itunes. an error happended now iphone stuck on connect to itunes logo screen .  tried tukrning on and of it connects but itunes does not recognize so i can restore .. any ideas?

    Dont know if accidently fixed it or not i got it to be recogniced by itune im restoring it now.  i held the power/sleep button till turned off.  then while holding the home button under the screen connected it to the usb wire .. also i change the usb port i was using on my computer dont know if it was luck or what but glad i got my phone back.
    itunes recognized it as in recovery mode
    http://support.apple.com/kb/HT1808
    got it working currently restoring from backup good luck guys

  • I am unable to buy on itunes as I live in France and use an English credit card which is registeredwh to my French address. itunes UK don't like the French address, itunes France don't like the English credit card. Any ideas on how to buy?

    I am unable to buy on itunes as I live in France but use an English credit card which is registered to my French address. itunes UK don't like the French address, itunes France don't like the English credit card. Any ideas on how to buy? (Without having to pay for a French credit card)

    Go to a place in France and purchase an iTunes gift card. You should be able to use that in the French iTunes store if you have a French address associated with your iTunes account.

  • I can't reposition photos i post to my timeline on facebook using safari, but it works via all other browsers.. I used to be able to but now I can't.  Any ideas as to why?

    i can't reposition photos i post to my timeline on facebook using safari, but it works via all other browsers such as fire fox and chrome.. I used to be able to but now I can't.  Any ideas as to what is causing this?
    Kind regards,
    Grand

    Empty the Safari cache...
    Command + Option + E on your keyboard.
    Quit and relaunch Safari. Try to re position an image on FB.

  • When synching the iPhone i get the following message: iTunes could not sync contacts to iPhone because the sync server failed to sync the phone. any idea how to correct this

    Header 1
    Header 2
    when synching iPhone i get the following message: iTunes could not sync contacts to iPhone because the sync server failed to sync the phone. any idea how to fix this problem?

    Did you try the solutions mentioned in this article? iTunes for Windows: "Unable to load data class information from sync services" alert

  • 2 days ago I was able to manually send my text messages to my email in box. Now I can't.. any ideas?

    2 days ago I was able to manually send my text messages to my email in box. Now I can't.. any ideas?
    I was always able to go into the particular text that I wanted to save. Press on the text and it would give the option of either copy, more or speak.  I would click more and on the far left side the text would be checked and I was able to click and check multiple texts within. Once I had selected what I wanted to send to my email account. I would click on the arrow on the bottom right side and a new screen would come up I would tap within and all the text messages that I checked would appear and I would then enter my email address and hit the send and it would appear in my email send box.  NOW I CAN”T DO THIS.. I have been on the phone with Apple 3 times with no reason… Anyone have suggestions?
    Thanks,
    Phone Issues2013

    Without knowing what settings you are currently using, its impossible to say what has gone wrong.
    These are the 2 (different sets of) settings Apple provides:
    http://support.apple.com/kb/HT5330
    http://support.apple.com/kb/HT4864

  • I have just downloaded ios7 to both my wife's and my ipad4. I can get Airdrop, she can't! Any ideas why?

    I have just downloaded  ios7 to both my wife's and my ipad4s. I can get Airdrop, she can't. Any ideas?

    Hey Gavinchick,
    Thanks for the question. I understand you are experiencing issues after updating your iPhone to iOS 7.0.6. If you have not already done so, you may want to restart or reset the device:
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    If the above steps do not resolve the issue, you'll want to restore your device with iTunes in recovery-mode:
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    If your device is not recognized in iTunes for Windows while in recovery-mode, see this article (specifically Step 4):
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Thanks,
    Matt M.

Maybe you are looking for

  • Tab Order of POPUPKEY_FROM_LOV doesn't seem to work?

    Hi All, If got a POPUPKEY_FROM_LOV in my PL/SQL Dynamic code as follows: APEX_ITEM.POPUPKEY_FROM_LOV(33,lClient,'CLIENTS',60,100,0,'YES', 500,'tabindex="30" ') but it does not recognize the item in the tab order. Can I do it and if so what am I doing

  • Transferring Mail to a new computer - Some Help Please

    What is the best way(s) to transfer all my Apple email (not .mac email) from my G4 to a new G5? I am closing down my G4 and want to start up my G5 email with all of the mail (with content) that currently resides in my Inbox, Sent and Saved email fold

  • Editing PDF in Photoshop CS3?

    I've got a 15 page PDF file that I want to modify very slightly - one of the images needs to be changed. I seem to be able to open the file, but it opens as 15 images. How do I save the images as a single PDF, like the original?

  • Make Fusion Middleware document available on the web server

    I'd like to set up so that Fusion Middleware document that were shipped with the software is available on the local web server where Weblogic is running. What do I need to do?

  • Version distribute vi

    I did some VIs in LV 5.1 (the only licensed version we own) as a proof of concept, and they work great! I just installed the 8.6 Eval version, and I can't open them ("version too old" error). I want to open them in some intermediate version and re-sa