W32time NTP server Windows Server 2012 o 2008 R2

Hello All
I have a one problem, I have configured of NTP Server of this way, but when restarted server the time not changed, The server not to synchronized with NTP server.
1. Run Regedit
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\W32Time\Parameters\Type
Change from NT5DS to NTP
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\W32Time\Config\AnnounceFlags
Edit the DWORD Value to 5. notice that the default value is “a”
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\W32Time\TimeProvides\NTPServer\Enabled
Change the value from 0 to 1
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\W32Time\Parameters\NtpServer
Change from time.windows.com,0x1 to the IP address of NTP time Server. For example,  1.pool.ntp.org,0×1
Net Stop W32time /Net Start W32time
Some have idea about of this problem?
Hugo Monge

Hi Hugo,
>>W32time NTP server Windows Server 2012 o 2008 R2
Before going further, what does this mean?
Regarding how to configure an authoritative time server in Windows Server, the following articles can be referred to as reference.
How to configure an authoritative time server in Windows Server
http://support.microsoft.com/kb/816042
Configuring a time source for the forest
https://technet.microsoft.com/en-us/library/cc784800(v=ws.10).aspx
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Similar Messages

  • Downgrade HPC cluster from Windows Server 2012 to 2008 R2

    Hi,
    We have a customer that have bought a system with HPC Windows Server 2012 and need to downgrade to HPC Windows Server 2008 R2.
    The customer thas gotten a Windows Server 2012 OEM DVD, so my question is how can we install the system with Windows Server 2008 R2, what are the practical steps like, where to find software, licenses keys etc...
    Thanks for reply.
    /Regards Andreas

    Hi,
    For the HPC question, please post in HPC support forum:
    Windows HPC Server
    http://social.microsoft.com/Forums/en-US/home?forum=windowshpcitpros
    Thanks for you cooperation and support.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • SQL Server 2012 DB Engine does not start (clean install with server 2012 and 2008 R2)

    I'm trying to do clean installation of SQL server 2012 on Server 2012 (which is runnning as a VM on ESX server) and getting this "wait on the DB engine recovery failed" message. Initially, I though this issue was related to some permission issues
    but changing the permission or service accounts didn't help. I'm not seeing any "denied" messages in the log files either. Even with Server 2008 R2 (clean built VM), the installation gives the exactly the same error messages. 
    My setup is purely for test purpose; so, the security is not a concern. Can someone help or give me a clue where to look? 
    (Summary)
    Overall summary:
      Final result:                  Failed: see details below
      Exit code (Decimal):           -2061893606
      Start time:                    2014-05-28 17:12:12
      End time:                      2014-05-28 17:19:47
      Requested action:              Install
    Setup completed with required actions for features.
    Troubleshooting information for those features:
      Next step for SQLEngine:       Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
    Machine Properties:
      Machine name:                  WIN-1V3VKPV5Q19
      Machine processor count:       1
      OS version:                    Future Windows Version
      OS service pack:               
      OS region:                     United States
      OS language:                   English (United States)
      OS architecture:               x64
      Process architecture:          64 Bit
      OS clustered:                  No
    Product features discovered:
      Product              Instance             Instance ID                    Feature                
                     Language             Edition              Version         Clustered 
    Package properties:
      Description:                   Microsoft SQL Server 2012 Service Pack 1
      ProductName:                   SQL Server 2012
      Type:                          RTM
      Version:                       11
      Installation location:         E:\x64\setup\
      Installation edition:          Evaluation
      Slipstream:                    True
      SP Level                       1
      Patch Level:                   11.1.3128.0
    Product Update Status:
      Success: KB 2674319, KB 2793634
    Product Updates Selected for Installation:
      Title:                         Service Pack 1
      Knowledge Based Article:       KB 2674319
      Version:                       11.1.3000.0
      Architecture:                  x64
      Language:                      1033
      Title:                         SQL Server 2012 SP1 GDR Product Update
      Knowledge Based Article:       KB 2793634
      Version:                       11.1.3128.0
      Architecture:                  x64
      Language:                      All
      Update Source:                 MU
    User Input Settings:
      ACTION:                        Install
      ADDCURRENTUSERASSQLADMIN:      false
      AGTSVCACCOUNT:                 NT Service\SQLAgent$TESTDB
      AGTSVCPASSWORD:                *****
      AGTSVCSTARTUPTYPE:             Manual
      ASBACKUPDIR:                   Backup
      ASCOLLATION:                   Latin1_General_CI_AS
      ASCONFIGDIR:                   Config
      ASDATADIR:                     Data
      ASLOGDIR:                      Log
      ASPROVIDERMSOLAP:              1
      ASSERVERMODE:                  MULTIDIMENSIONAL
      ASSVCACCOUNT:                  <empty>
      ASSVCPASSWORD:                 <empty>
      ASSVCSTARTUPTYPE:              Automatic
      ASSYSADMINACCOUNTS:            <empty>
      ASTEMPDIR:                     Temp
      BROWSERSVCSTARTUPTYPE:         Automatic
      CLTCTLRNAME:                   <empty>
      CLTRESULTDIR:                  <empty>
      CLTSTARTUPTYPE:                0
      CLTSVCACCOUNT:                 <empty>
      CLTSVCPASSWORD:                <empty>
      CLTWORKINGDIR:                 <empty>
      COMMFABRICENCRYPTION:          0
      COMMFABRICNETWORKLEVEL:        0
      COMMFABRICPORT:                0
      CONFIGURATIONFILE:             C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140528_170909\ConfigurationFile.ini
      CTLRSTARTUPTYPE:               0
      CTLRSVCACCOUNT:                <empty>
      CTLRSVCPASSWORD:               <empty>
      CTLRUSERS:                     <empty>
      ENABLERANU:                    false
      ENU:                           true
      ERRORREPORTING:                false
      FEATURES:                      SQLENGINE
      FILESTREAMLEVEL:               0
      FILESTREAMSHARENAME:           <empty>
      FTSVCACCOUNT:                  <empty>
      FTSVCPASSWORD:                 <empty>
      HELP:                          false
      IACCEPTSQLSERVERLICENSETERMS:  true
      INDICATEPROGRESS:              false
      INSTALLSHAREDDIR:              C:\Program Files\Microsoft SQL Server\
      INSTALLSHAREDWOWDIR:           C:\Program Files (x86)\Microsoft SQL Server\
      INSTALLSQLDATADIR:             <empty>
      INSTANCEDIR:                   C:\Program Files\Microsoft SQL Server\
      INSTANCEID:                    TESTDB
      INSTANCENAME:                  TESTDB
      ISSVCACCOUNT:                  NT AUTHORITY\Network Service
      ISSVCPASSWORD:                 <empty>
      ISSVCSTARTUPTYPE:              Automatic
      MATRIXCMBRICKCOMMPORT:         0
      MATRIXCMSERVERNAME:            <empty>
      MATRIXNAME:                    <empty>
      NPENABLED:                     0
      PID:                           *****
      QUIET:                         false
      QUIETSIMPLE:                   false
      ROLE:                          <empty>
      RSINSTALLMODE:                 DefaultNativeMode
      RSSHPINSTALLMODE:              DefaultSharePointMode
      RSSVCACCOUNT:                  <empty>
      RSSVCPASSWORD:                 <empty>
      RSSVCSTARTUPTYPE:              Automatic
      SAPWD:                         *****
      SECURITYMODE:                  SQL
      SQLBACKUPDIR:                  <empty>
      SQLCOLLATION:                  SQL_Latin1_General_CP1_CI_AS
      SQLSVCACCOUNT:                 NT Service\MSSQL$TESTDB
      SQLSVCPASSWORD:                <empty>
      SQLSVCSTARTUPTYPE:             Automatic
      SQLSYSADMINACCOUNTS:           WIN-1V3VKPV5Q19\Administrator
      SQLTEMPDBDIR:                  <empty>
      SQLTEMPDBLOGDIR:               <empty>
      SQLUSERDBDIR:                  <empty>
      SQLUSERDBLOGDIR:               <empty>
      SQMREPORTING:                  false
      TCPENABLED:                    1
      UIMODE:                        Normal
      UpdateEnabled:                 true
      UpdateSource:                  MU
      X86:                           false
      Configuration file:            C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140528_170909\ConfigurationFile.ini
    Detailed results:
      Feature:                       Database Engine Services
      Status:                        Failed: see logs for details
      Reason for failure:            An error occurred during the setup process of the feature.
      Next Step:                     Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
      Component name:                SQL Server Database Engine Services Instance Features
      Component error code:          0x851A001A
      Error description:             Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
      Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
      Feature:                       SQL Browser
      Status:                        Passed
      Feature:                       SQL Writer
      Status:                        Passed
      Feature:                       SQL Client Connectivity
      Status:                        Passed
      Feature:                       SQL Client Connectivity SDK
      Status:                        Passed
    Rules with failures:
    Global rules:
    Scenario specific rules:
    Rules report file:               C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140528_170909\SystemConfigurationCheck_Report.htm
    (Error Log)
    2014-05-28 17:17:26.64 spid8s      0 transactions rolled back in database 'msdb' (4:0). This is an informational message only. No user action is required.
    2014-05-28 17:17:26.73 spid9s      Starting up database 'model'.
    2014-05-28 17:17:28.24 spid9s      Error: 9004, Severity: 23, State: 6.
    2014-05-28 17:17:28.24 spid9s      An error occurred while processing the log for database 'model'.  If possible, restore from backup. If a backup is not available, it might be necessary to rebuild the log.
    2014-05-28 17:17:28.24 spid9s      SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required.
    (Details)
    (01) 2014-05-28 17:17:28 Slp: Exception type: Microsoft.SqlServer.Configuration.SqlEngine.SqlEngineConfigException
    (01) 2014-05-28 17:17:28 Slp:     Message: 
    (01) 2014-05-28 17:17:28 Slp:         Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
    (01) 2014-05-28 17:17:28 Slp:     HResult : 0x851a001a
    (01) 2014-05-28 17:17:28 Slp:         FacilityCode : 1306 (51a)
    (01) 2014-05-28 17:17:28 Slp:         ErrorCode : 26 (001a)
    (01) 2014-05-28 17:17:28 Slp:     Data: 
    (01) 2014-05-28 17:17:28 Slp:       SQL.Setup.FailureCategory = ConfigurationFailure
    (01) 2014-05-28 17:17:28 Slp:       WatsonConfigActionData = INSTALL@CONFIGRC@SQL_ENGINE_CORE_INST
    (01) 2014-05-28 17:17:28 Slp:       WatsonExceptionFeatureIdsActionData = System.String[]
    (01) 2014-05-28 17:17:28 Slp:     Stack: 
    (01) 2014-05-28 17:17:28 Slp:         at Microsoft.SqlServer.Configuration.SqlEngine.SqlServerServiceBase.WaitSqlServerStart(Process processSql)
    (01) 2014-05-28 17:17:28 Slp:         at Microsoft.SqlServer.Configuration.SqlEngine.SqlServerServiceSCM.StartSqlServer(String[] parameters)
    (01) 2014-05-28 17:17:28 Slp:         at Microsoft.SqlServer.Configuration.SqlEngine.SqlEngineDBStartConfig.ConfigSQLServerSystemDatabases(EffectiveProperties properties, Boolean isConfiguringTemplateDBs, Boolean useInstallInputs)
    (01) 2014-05-28 17:17:28 Slp:         at Microsoft.SqlServer.Configuration.SqlEngine.SqlEngineDBStartConfig.DoCommonDBStartConfig(ConfigActionTiming timing)
    (01) 2014-05-28 17:17:28 Slp:         at Microsoft.SqlServer.Configuration.SqlConfigBase.SlpConfigAction.ExecuteAction(String actionId)
    (01) 2014-05-28 17:17:28 Slp:         at Microsoft.SqlServer.Configuration.SqlConfigBase.SlpConfigAction.Execute(String actionId, TextWriter errorStream)
    (01) 2014-05-28 17:17:28 Slp: Watson Bucket 1 
     Original Parameter Values 
    (01) 2014-05-28 17:17:28 Slp: Parameter 0 : SQL Server 2012@RTM@ 
    (01) 2014-05-28 17:17:28 Slp: Parameter 1 : Microsoft.SqlServer.Configuration.SqlEngine.SqlServerServiceBase.WaitSqlServerStart 
    (01) 2014-05-28 17:17:28 Slp: Parameter 2 : Microsoft.SqlServer.Configuration.SqlEngine.SqlServerServiceBase.WaitSqlServerStart 
    (01) 2014-05-28 17:17:28 Slp: Parameter 3 : Microsoft.SqlServer.Configuration.SqlEngine.SqlEngineConfigException@1306@26 
    (01) 2014-05-28 17:17:28 Slp: Parameter 4 : Microsoft.SqlServer.Configuration.SqlEngine.SqlEngineConfigException@1306@26 
    (01) 2014-05-28 17:17:28 Slp: Parameter 5 : SqlEngineDBStartConfigAction_install_configrc 
    (01) 2014-05-28 17:17:28 Slp: Parameter 6 : INSTALL@CONFIGRC@SQL_ENGINE_CORE_INST 
    (01) 2014-05-28 17:17:28 Slp: 
     Final Parameter Values 
    (01) 2014-05-28 17:17:28 Slp: Parameter 0 : SQL Server 2012@RTM@ 
    (01) 2014-05-28 17:17:28 Slp: Parameter 1 : 0xD15B4EB2 
    (01) 2014-05-28 17:17:28 Slp: Parameter 2 : 0xD15B4EB2 
    (01) 2014-05-28 17:17:28 Slp: Parameter 3 : 0x4BDAF9BA@1306@26 
    (01) 2014-05-28 17:17:28 Slp: Parameter 4 : 0x4BDAF9BA@1306@26 
    (01) 2014-05-28 17:17:28 Slp: Parameter 5 : SqlEngineDBStartConfigAction_install_configrc 
    (01) 2014-05-28 17:17:28 Slp: Parameter 6 : 0x9C5770A6 

    Hi Nababoya:
    As you are telling this is a test installation process...
    In the logs i m seeing the error message "An error occurred while processing the log for database 'model'.  If possible, restore from backup. If a backup is not available, it might be necessary to rebuild the log.".
    1) If the SQL Services was installed successfully and SQL Service was not able to start because of model database issue...
        1.1) If you have model database SQL back file, start the SQL Server in single user mode with minimum configuration and try to restore MODEL database
    http://blogs.msdn.com/b/sqlserverfaq/archive/2011/05/11/inf-hey-my-sql-server-service-is-not-starting-what-do-i-do.aspx
        1.2) If you don't have backups., try to rebuild the system databases but make sure that you are not losing any data critical data on master and SQL Jobs on MSDB
    http://msdn.microsoft.com/en-us/library/dd207003%28v=sql.110%29.aspx#RebuildProcedure
    2) As if this is a new installation try to repair the instance with the help of setup media file
    3) If the repair option fails., the last option wipe out the complete SQL Server components from Services.msc and Registries and start new installation.
    4) Make sure when you are doing un-installation all the required SQL Server components on services.msc should be in stop state.
    Hope this helps and let me know any questions...
    Thanks,
    Thanks, Satish Kumar. Please mark as this post as answered if my anser helps you to resolves your issue :)

  • Downgrading from Server 2012 to 2008

    I have already purchased Server 2012 standard 64 bit and installed it only to find out that the software I am running only accepted Server 2008.  How do I downgrade to Server 2008.  Also, will I be able to use the 2012 when my software accepts
    it?  Thanks.

    I recommend you install Hyper-V role on your Server 2012 (Std comes with license for 2 VMs), setup a Server 2008 VM for your legacy software, and put serious consideration into dumping the software that does not work on Server 2012. Server 2012 has been
    out for 3 years. A software vendor who has not kept up is not worth keeping.
    And yes, you can downgrade to server 2008, although this is a horrible idea. By downgrade, I mean install Server 2008 from scratch, and get a 2008 license key from Microsoft under the same 2012 Std purchase.
    Sam Boutros, Senior Consultant, Software Logic, KOP, PA http://superwidgets.wordpress.com (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable)

  • Windows Server 2012 as NTP Server for Windows Server 2008R2 Domain Controller

    We have one domain with 3 Windows Server 2008R2 DC's. Our Edge router is configured to get the time from the internet, and was our timesource for the PDC emulator. But lately we have migrated our major routers to Cisco IOS15, and now the timeservice on the
    PDCe is unable to fetch the time. This is a known bug, as you can read here:
    http://social.technet.microsoft.com/Forums/ja-JP/b16de048-8642-4799-b85a-ad092e17dd47/windows-server-2012-ntp-version-compatibility
    Now I've found out that Windows Server 2012 does sync with the router. That's our DirSync server, and is in the same VLAN as our DC's. So I thought: I'll set up the Windows Server 2012 as new timeserver, so our PDCe can sync with that server. (Compony
    policy is that DC's don't talk to the internet). Everything seems alright.
    I've set:
    w32tm /config /manualpeerlist:<IP of router>,0x8 /syncfromflags:manual
    w32tm /config /reliable:yes
    Changed the registry with:
    HKLM\SYSTEM\CC\SERVICES\W32TIME\TIMEPROVIDERS\NTPSERVER - Enabled:1
    HKLM\SYSTEM\CC\SERVICES\W32TIME\Config - AnnounceFlags:A
    And stopped and started the W32Time service. I can see that the Windows 2012 server is fetching the correct time, and checked with NBTSTAT -NA that it's listening on port 123.
    But our PDCe doesn't sync. (also changed the config so it has the 2012 server as timesource). Get the EventID 47:
    Time Provider NtpClient: No valid response has been received from manually configured peer <w2012server> after 8 attempts to contact it. This peer will be discarded as a time source and NtpClient will attempt to discover a new peer with this DNS
    name. The error was: The peer is unreachable.
    What more can I try?

    It only shows me the 3 DC's:
    DC04.domain.local *** PDC ***[[::1]:123]:
        ICMP: 0ms delay
        NTP: +0.0000000s offset from DC04.domain.local
            RefID: 'LOCL' [0x4C434F4C]
            Stratum: 1
    DC03.domain.local[10.x.x.x:123]:
        ICMP: 0ms delay
        NTP: -0.0097028s offset from DC04.domain.local
            RefID: DC04.domain.local [10.x.x.x]
            Stratum: 2
    DC05.domain.local[10.x.x.x:123]:
        ICMP: 0ms delay
        NTP: -0.0127883s offset from DC04.domain.local
            RefID: W8D-VW-DC04.domain.local [10.x.x.x]
            Stratum: 2
    Warning:
    Reverse name resolution is best effort. It may not be
    correct since RefID field in time packets differs across
    NTP implementations and may not be using IP addresses.

  • Why does my Cisco router firewall block Windows Server 2012 traffic, but not Windows Server 2008 traffic?

    Hello,
       I run a small business network with five physical servers: three Dell servers running Windows Server 2008 R2, one custom build running 2008, and another custom build running 2012 with Domain Controller Role (same hardware for both custom builds). 
    The Dell servers are all running the Hyper-V role and each has a number of 2008 VMs.  I also have a 2012 VM with the Domain Controller Role on one of the Hyper-V servers and another VM with a completely base install of 2012.
       All servers are plugged into a Cisco SG300-52 switch which is uplinked to a Cisco 881 router which is connected to a cable TWC provided Ubee cable modem.  I have no VLANs setup.  I do have the Firewall on the router configured
    to inspect most traffic.
       Here is my problem:  I cannot connect to most of the internet on ANY 2012 server (and all exhibit the exact same behavior), but I have NO problems connecting to the internet from 2008 servers.  Here is what I already know:
       1.) I can ping the outside world just fine so ICMP is passing to any external host.
       2.) Two of the 2012 servers are DCs running DNS services and they can connect to the internet just fine for DNS requests because they are doing a perfectly good job of providing DNS services to my network.
       3.) Here's where it gets really weird: I can browse in internet explorer to Bing.com and it works.  I can also go to a couple other Microsoft websites (though they are very slow).  If I click on any link in Bing, however, it doesn't
    work and gives me a page not available error.  If I connect to a non-MS website like Google or my company website, I get page not available.
        4.) I have tried to telnet to port 80 at Bing and it works.  I have tried to telnet to port 80 at google.com and it won't connect.  The 2008 servers have no issue telneting to either bing or google on port 80 and none of my client
    PCs on the network do either.
        5.) Windows Update will not connect and neither will any other update service such as AVG (I have AVG Antivirus installed WITHOUT firewall on two of the three servers. The base 2012 VM has no software installed and no roles...I built it
    just to see if it could connect after a fresh install and it still cannot.)
        6.) The network connection does not indicate limited connectivity (probably because ICMP appears to be passing successfully)
         7.) If I connect the server directly to the modem it has full internet access.
         8.) All internal LAN connectivity is perfectly fine and runs at full speed.
         9.) I have scoured the internet trying to find other examples of this particular kind of connectivity issue on 2012 and I have found two TechNet articles that are similar, but they both had the same resolution: changing the router
    worked, but no one knows why. (I would have included the links, but apparently I cannot do that yet)
    My question is this: What is different about Windows Server 2012 networking that would render it unable to communicate through a router that Windows Server 2008 has no problems with?  I ask because, unlike in these two articles where they were
    running personal networking equipment they could easily upgrade, I'm running a Cisco 881 with what should be virtually limitless configuration options and I have no desire to replace it.  I have to assume the issue is somehow related to the firewall configuration,
    which I could fix easily, but I don't know what to change.  If anyone knows what changed in 2012 and why I would be able to browse to bing and other MS sites but no where else, please pass them along.  Thanks.

    This is the IP Config for the 2012 DC:
    Windows IP Configuration
       Host Name . . . . . . . . . . . . : COMPANYDC02
       Primary Dns Suffix  . . . . . . . : company.local
       Node Type . . . . . . . . . . . . : Hybrid
       IP Routing Enabled. . . . . . . . : No
       WINS Proxy Enabled. . . . . . . . : No
       DNS Suffix Search List. . . . . . : company.local
    Ethernet adapter Ethernet:
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Intel(R) 82574L Gigabit Network Connection
       Physical Address. . . . . . . . . : 00-25-90-DC-EF-D5
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
       Link-local IPv6 Address . . . . . : fe80::81d5:53cf:bd07:14ed%12(Preferred)
       IPv4 Address. . . . . . . . . . . : 10.10.10.202(Preferred)
       Subnet Mask . . . . . . . . . . . : 255.255.255.0
       Default Gateway . . . . . . . . . : 10.10.10.1
       DHCPv6 IAID . . . . . . . . . . . : 301999504
       DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1A-96-D5-C3-00-25-90-DC-EF-D5
       DNS Servers . . . . . . . . . . . : 10.10.10.202
                                           10.10.10.221
       NetBIOS over Tcpip. . . . . . . . : Enabled
    Tunnel adapter isatap.{9929D989-8E88-4096-A1CB-61F1DB173FA3}:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Microsoft ISATAP Adapter
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
    Tunnel adapter Teredo Tunneling Pseudo-Interface:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Microsoft Teredo Tunneling Adapter
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
    This is the IP Config for the fresh install 2012 VM:
    Windows IP Configuration
       Host Name . . . . . . . . . . . . : WIN-800299O7ES6
       Primary Dns Suffix  . . . . . . . :
       Node Type . . . . . . . . . . . . : Hybrid
       IP Routing Enabled. . . . . . . . : No
       WINS Proxy Enabled. . . . . . . . : No
       DNS Suffix Search List. . . . . . : company.local
    Ethernet adapter Ethernet:
       Connection-specific DNS Suffix  . : company.local
       Description . . . . . . . . . . . : Microsoft Hyper-V Network Adapter
       Physical Address. . . . . . . . . : 00-15-5D-0A-5C-02
       DHCP Enabled. . . . . . . . . . . : Yes
       Autoconfiguration Enabled . . . . : Yes
       IPv4 Address. . . . . . . . . . . : 10.10.10.49(Preferred)
       Subnet Mask . . . . . . . . . . . : 255.255.255.0
       Lease Obtained. . . . . . . . . . : Saturday, August 23, 2014 10:23:01 PM
       Lease Expires . . . . . . . . . . : Wednesday, August 27, 2014 10:23:01 PM
       Default Gateway . . . . . . . . . : 10.10.10.1
       DHCP Server . . . . . . . . . . . : 10.10.10.1
       DNS Servers . . . . . . . . . . . : 10.10.10.220
                                           10.10.10.221
       NetBIOS over Tcpip. . . . . . . . : Enabled
    Tunnel adapter isatap.company.local:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . : company.local
       Description . . . . . . . . . . . : Microsoft ISATAP Adapter
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
    NOTE: 10.10.10.220 and 10.10.10.221 are the other domain controllers on my network.  One of them is 2012 and one of them is 2008.  They are both functioning correctly for providing DNS services.  The 2012 Virtual DC, however, still has
    the internet connectivity issue that this whole post was about in the first place.
    NOTE2: When I logged on to COMPANYDC02 this morning, it told me that I had new Windows Updates that needed to be downloaded.   Confused, I checked the most recent time WU had checked for updates at it had successfully checked for updates last night
    at 10pm.  Of course, it failed when trying to download them, but it appears that once in a while, a connection gets through successfully...

  • Install 2008 R2 on Windows Server 2012

    Hi,
    I am trying to install SQL Server 2008 R2 SP1 on Windows Server 2012 Datacenter.
    However, I get below warning when running setup.exe:
    "your version of microsoft sql server (2008 and 2008 r2) isn't compatible with this version of windows"
    How do I find what prerequisite I need?
    Thanks

    Hi,
    Apologies for very late response. SQL Server 2008 R2 is x64 and Windows Server 2012 Datacenter is x64.
    When I try to install SQL Server I get this...
    I click 'Run the program without getting help' and all looks ok...
    Any ideas?
    Thanks!
    As you can see all rule check is fine you can move ahead.I usually get this message during installation but installation never fails
    Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

  • SharePoint 2013 OS: Windows Server 2008 R2 vs Windows Server 2012 Standard

    Hi Team,
    We are thinking on upgrading from SharePoint 2010 to SP 2013 soon. I have been researching about the server OS I should install as host, and it seems that SharePoint 2013 is fully compatible by now with both Windows Server 2008 R2 Standard + SP1 and
    Windows Server 2012 Standard. In my opinion we should go with server 2012, but Windows server 2008 is the norm here at our organization and our Infrastructure team seems reluctant to upgrade servers to 2012 yet.
    My question is, what SharePoint or Windows 2012 features will we miss if we decide to stay on Windows 2008?  What are the perks (selling points) of going with 2012 over 2008? (besides the obvious Microsoft support range extension).
    Thanks!
    -Rob.

    If you stay on Windows Server 2008 R2 you will enter the extended/out of support phase sooner, of course. You will miss out on IIS improvements, although in practical terms it may not mean much.
    There are extra patches required for a 2008 R2 deployment that are not needed on 2012 for SharePoint 2013. But other than that, I think the other big issue is that mostly in the community, you'll find people running Server 2012 which means issues are better
    'known' by the community, versus 2008 R2 in combination with SharePoint 2013.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Windows server 2008 R2 to Windows server 2012 R@ Upgrade

    We have Team Foundation server 2010 server configured in our environment.
    operating system: windows server 2008 R2 Datacenter
    Server installed: Team foundation server 2010 with share point services 3.0.
    we need to upgrade this server with windows server 2012 R2 and Team foundation server 2010 as it is.
    need to upgrade as below:
    operation system windows server 2012 R2 Datacenter
    Server Installed : Team foundation server 210 with sharepoint services 3.0 as it is.
    I have tried to direct upgrade by running a setup of windows server 2012 R2 but it shows error message if : "
    When you upgrade Windows Server 2008 to Windows Server 2012, you receive the following error message:
    Windows won’t install unless each of these things is taken care of. Close Windows Setup, take care of each one, and then restart Windows Setup to continue.
    Windows needs to be restarted so necessary changes to system files can be made before continuing.
    Make these changes:
    Turn off these Windows features.
    Windows SharePoint Services 3.0 – Please read Microsoft Knowledge Base article: 962216
    I have installed sharepoint 3.0 with sp3. but still I am geeing same error.
    we need to upgrade operating system,n in place.
    Kindly request you for the quick response.

    Hi,
    To understand more clearly regarding upgrading issue here providing you link for more information.
    Upgrade Options for Windows Server 2012 R2
    http://technet.microsoft.com/en-us/library/dn303416.aspx
    Install and Deploy Windows Server 2012 R2 and Windows Server 2012
    http://technet.microsoft.com/en-us/library/hh831620.aspx
    Hope it helps!
    Regards.

  • Update error of SQL Server 2012 enterprise running on Windows server 2008 standard SP2 (32 bits)

    Hi there;
    I have a windows server 2008 SP2 (32bits) in which I have an instance of SQL Server
    2008 and another of 2012.
    My Windows server 2008 installed the following updates; (see below).
    (KB2898858),(KB2909921),(KB890830),(KB2898869),(KB2911502),(KB2901126),
    (KB2916036),(KB2862973),(KB2901113)
    After the machine was re-started, I was not abble to connect
    to the instance of SQL Server 2012.  I am able
    to connect to the instance of SQL Server 2008.
    The error message I get when I atemp to connect can be found
    at the end of the list of updates below.
    Do I need to uninstall an update? if so, which one and how do I do that?
    Thanks        Gabriel I. Ruiz
    Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Vista SP2 and Windows Server 2008 SP2 x86 (KB2898858)
    Installation date: ‎2/‎12/‎2014 11:42 PM
    Installation status: Successful
    Update type: Important
    More information: 
    http://support.microsoft.com/kb/2898858
    Cumulative Security Update for Internet Explorer 9 for Windows Server 2008 (KB2909921)
    Installation date: ‎2/‎12/‎2014 11:42 PM
    Installation status: Successful
    Update type: Important
    More information: 
    http://support.microsoft.com/kb/2909921
    Windows Malicious Software Removal Tool - February 2014 (KB890830)
    Installation date: ‎2/‎12/‎2014 11:41 PM
    Installation status: Successful
    Update type: Important
    More information: 
    http://support.microsoft.com/kb/890830
    Security Update for Microsoft .NET Framework 4.5.1 on Windows 7, Windows Vista and Windows Server 2008 x86 (KB2898869)
    Installation date: ‎2/‎12/‎2014 11:40 PM
    Installation status: Successful
    Update type: Important
    More information: 
    http://support.microsoft.com/kb/2898869
    Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Vista SP2 and Windows Server 2008 SP2 x86 (KB2911502)
    Installation date: ‎2/‎12/‎2014 11:36 PM
    Installation status: Successful
    Update type: Important
    More information: 
    http://support.microsoft.com/kb/2911502
    Security Update for Microsoft .NET Framework 4.5.1 on Windows 7, Windows Vista, and Windows Server 2008 x86 (KB2901126)
    Installation date: ‎2/‎12/‎2014 11:36 PM
    Installation status: Successful
    Update type: Important
    More information: 
    http://support.microsoft.com/kb/2901126
    Security Update for Windows Server 2008 (KB2916036)
    Installation date: ‎2/‎12/‎2014 11:34 PM
    Installation status: Successful
    Update type: Important
    More information: 
    http://support.microsoft.com/kb/2916036
    Security Update for Windows Server 2008 (KB2862973)
    Installation date: ‎2/‎12/‎2014 11:34 PM
    Installation status: Successful
    Update type: Important
    More information: 
    http://support.microsoft.com/kb/2862973
    Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Vista SP2 and Windows Server 2008 SP2 x86 (KB2901113)
    Installation date: ‎2/‎12/‎2014 11:34 PM
    Installation status: Successful
    Update type: Important
    More information: 
    http://support.microsoft.com/kb/2901113
    ===================================
    Cannot connect to HAVANA\HAVANA_2012_1ST.
    ===================================
    The client was unable to establish a connection because of an error during connection initialization process before login. Possible causes include the following:  the client tried to connect to an unsupported version of SQL Server; the server was too busy
    to accept new connections; or there was a resource limitation (insufficient memory or maximum allowed connections) on the server. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.) (.Net SqlClient Data Provider)
    For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=233&LinkId=20476
    Server Name: HAVANA\HAVANA_2012_1ST
    Error Number: 233
    Severity: 20
    State: 0
    Program Location:
       at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
       at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
       at System.Data.SqlClient.TdsParserStateObject.SNIWritePacket(SNIHandle handle, SNIPacket packet, UInt32& sniError, Boolean canAccumulate, Boolean callerHasConnectionLock)
       at System.Data.SqlClient.TdsParserStateObject.WriteSni(Boolean canAccumulate)
       at System.Data.SqlClient.TdsParserStateObject.WritePacket(Byte flushMode, Boolean canAccumulate)
       at System.Data.SqlClient.TdsParser.SendPreLoginHandshake(Byte[] instanceName, Boolean encrypt)
       at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
       at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
       at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer
    timeout)
       at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
       at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance,
    SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
       at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
       at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
       at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
       at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
       at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
       at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
       at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
       at System.Data.SqlClient.SqlConnection.Open()
       at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
       at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
    ===================================
    No process is on the other end of the pipe

    Hi,
    Check if SQL Server service is running fine. I doubt you may have changed the user account password used for SQL Server service. After restarting the machine, you also need to update the user account of SQL Server service in Configuration
    Manager. Re-type the user account name and password under Log on tab and see how it helps.
    Thanks.
    Tracy Cai
    TechNet Community Support

  • Attempted to perform an unauthorized operation error while installing SQL Server 2008 R2 Enterprise edition on Windows Server 2012 R2 standard VM server

    I've been trying fresh installation of SQL Server 2008 R2 enterprise on Windows Server 2012 R2 standard VM server several times for two weeks, but always get the error "Attempted to perform an unauthorized operation". At first, I attempted
    to install all features, but failed several times. So I decided to try install just Database Engine service, and still fail at the SqlBrowserConfigAction_Install_ConfigNonRC_Cpu32, with the error "Attempted to perform an unauthorized operation".
    I remote login to server with my admin domain account. This account is in server local Administrators group. I
    1. Right-click on setup.exe file | properties | Compatibility tab | select compatibility to Windows 8.Then click OK.
    2. Right-click on setup.exe file | Run as Administrator, to start the Installation Center.
    I have the document of my installation steps and zip file of the installation logs, if you need to take a look.
    Appreciate for any help!
    ntth

    Hi ntth,
    "Attempted to perform an unauthorized operation"
    The above error is always related to the Windows account SID mapping. I recommend you login into Windows using another Windows account which has administrative privileges and run SQL Server setup using that Windows account.
    Besides, please note that we need to apply SQL Server 2008 R2 Service Pack 2 or a later update when installing SQL Server Windows Server 2012 R2. For more information, please review this
    KB article.
    Thanks,
    Lydia Zhang
    If you have any feedback on our support, please click
    here.
    Lydia Zhang
    TechNet Community Support

  • Server 2008 R2 with WSUS need to specify location for Feature install for Server 2012 and Windows 8

    Having a problem where we need to add .net 3.5, amongst other things, in server 2012 and windows 8.1.  We're using WSUS on server 2008 R2, so when I go to add roles or features, I'm not able to as it tries to use Windows Update but it's set to use WSUS.
    I'm aware in server 2012 gpo's that you enable the policy 'specify settings for optional component installation and component repair' in Administrative Templates>System, however that setting is not available in Server 2008 R2.
    I've downloaded the templates from http://www.microsoft.com/en-us/download/details.aspx?id=36991 but the setting is still not there.
    Any suggestions on how to do this/allow feature install with Server 2008 R2?

    Hi,
    To upgrade the Administrative Templates, please run the downloaded msi file, then copy the needed admx files and adml files to the PolicyDefinitions folder.
    For detailed information, please refer to the link below,
    Managing Group Policy ADMX Files Step-by-Step Guide
    http://technet.microsoft.com/en-us/library/cc709647(v=WS.10).aspx
    Best Regards.
    Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Install SQL Server 2008 R2 SP 1 on Windows Server 2012

    Dear All,
    I've downloaded SQL Server SP1 from this link:
    http://www.microsoft.com/en-us/download/details.aspx?id=26727
    I downloaded  :
    SQLServer2008R2SP1-KB2528583-x64-ENU.exe
    SQLManagementStudio_x64_ENU.exe
    SQLServer2008R2SP1-KB2528583-IA64-ENU.exe
    when i run SQLServer2008R2SP1-KB2528583-x64-ENU.exe i have error:
    There are no SQL Server instances or shared features that can be updated on this computer
    what that i missed? is that i must install SQL Server 2008 R2?
    because if i run the SQL Server 2008 R2 there are compatible issue. I run this on Windows Server 2012
    Please Help.
    Best regards,
    Surbakti

    Hi,
    The cause could be an invalid entry in the userSettings section of the Microsoft.SqlServer.Configuration.LandingPage.Properties.Settings file.
    Delete this configuartion file or delete the folder "Microsoft_Corporation" and see how it works.
    Run the command: rd /s /q %localappdata%\Microsoft_Corporation
    For your reference:
    http://blogs.msdn.com/b/smondal/archive/2013/07/26/an-error-occurred-creating-the-configuration-section-handler-for-usersettings-microsoft-sqlserver-configuration-landingpage-properties-settings.aspx
    Thanks.
    Tracy Cai
    TechNet Community Support

  • Cannot connect to SERVER. Login failed for user 'DOMAIN\user'. (Microsoft SQL Server, Error 18456) - SQL Server 2012 on Windows Server 2008 R2

    I've seen multiple blogs and forums with similar problems and SQL 2012 or 2008. But no solutions that work for me.
    I have installed SQL Server in mixed mode (SQL and Windows authentication). I can create new Login accounts in either mode. However, I cannot get an AD security group Login account to work. I am trying to add group 'DOMAIN\Domain Admins' or 'SERVER\Administrators'
    as a Login so that any of the domain's administrator accounts can open SQL Server Management Studio and act as an 'sa' account on this server.
    I have deleted the SQL account 'DOMAIN\Domain Admins'.
    I have restarted SQL.
    I have restarted the Win2K8r2 server.
    I have launched SSMS as Administrator from the desktop of SERVER.
    I have launched SSMS as another user (and used 'DOMAIN\user' to lauch it) from the desktop of SERVER.
    I can create a login account named 'DOMAIN\user' (who happens to be a member of the 'DOMAIN\Domain Admins' group) and give this account 'sa' security, and when I do that, this account works as expected...
    How do I add a security group as a Login account and give all members of that group the ability to be an 'sa' account?

    Hi geoperkins,
    Are you getting the following error message?
    Error: 18456, Severity: 14, State: 11
    Login failed for user <Domain\user>. Reason: Token-based server access validation failed with an infrastructure error.
    If that is the case, the issue could be due to that the Windows login has no profile or that permissions could not be checked due to UAC. Please disable UAC firstly and check if it is successful to log in SQL Server.
    Another reason could be that the domain controller could not be reached. You may need to resort to re-creating the login. Create a new group in AD, add users to the new group, then add the group to the local admin group and create login for the group in SQL
    Server.
    There is a connect item describing similar issue for your reference.
    https://connect.microsoft.com/SQLServer/feedback/details/680705/cant-login-to-sql-using-windows-authentication-when-user-is-in-a-domain-security-group
    For more details about above error, please review the following blog.
    http://sqlblogcasts.com/blogs/simons/archive/2011/02/01/solution-login-failed-for-user-x-reason-token-based-server-access-validation-failed-and-error-18456.aspx
    Thanks,
    Lydia Zhang
    Lydia Zhang
    TechNet Community Support

  • [Forum FAQ]How to upgrade Windows Server 2008 R2 with a GUI to Windows Server 2012 Server Core

    We found that some customers willing to upgrade Windows Server 2008 R2 GUI to Windows Server 2012 Server Core recently. This article provides detailed steps to perform the upgrade.
    Analysis
    Upgrading from Windows Server 2008 R2 with a GUI installation to Windows Server 2012 with Server Core directly
    is not supported. If you do that, you will receive the error message below(Figure 1) in Compatibility report: 
    Figure 1.
    In these scenario, you can upgrade to Windows Server 2012 firstly. After the upgrade process is completed, you can switch freely between Server Core and Server with a GUI modes.
    Produces
    You can follow the steps below to perform an upgrade from Windows Server 2008 R2 with a GUI installation to Windows Server 2012 Server Core mode:
    1. Upgrade to Windows Server 2012 with a GUI mode
    1) Firstly, please boot into Windows Server 2008 R2 with a Windows Server 2012 installation DVD inserted.
    2) Select the operating system you want to install with a GUI mode.
    We can see 2 options (Server Core Installation or Server with a GUI) for each operating system version. (Figure 2)
    Figure 2.
    Note: Please make sure you have enough disk space on system partition. Or you will get such an error in Compatibility report.(Figure 3)
    Figure 3.
    After the Compatibility check, the installation will continue. It will take several minutes until upgrading is done.(Figure 4)
    Figure 4.
    2. Switch the GUI mode to Server Core
    Method 1: Using Server Manager
    1) Open Server Manager, click
    Manger and select “Remove Roles and Features” to start the
    Remove Roles and Features Wizard.
    2) In Features,
    uncheck the box next to the “User Interfaces and Infrastructure” option, and then click “Next”. (Figure 5)
    Figure 5.
    Now tick the “Restart the destination Server automatically if required” box, then click “Remove”. (Figure 6)
    Figure 6.
    Method 2: Using Windows PowerShell
    There are multiple ways to remove the GUI via Windows PowerShell, we introduce the way of using the ServerManager module.
    You can also run the commands in Windows PowerShell with an administrator to remove the GUI feature:
    “Import-Module ServerManager”
    “Uninstall-Windowsfeature Server-Gui-Shell –Restart”
    or
    “Uninstall-WindowsFeature Server-Gui-Shell, Server-Gui-Mgmt-Infra –Restart”
    It will take a period of time to remove the GUI feature and reboot. When the system boots up, you will get into the Windows Server 2012 with Server Core mode. (Figure 7)
    Figure 7.
    More information:
    Switch between Full and Server Core in Windows Server 2012 using PowerShell 3.0
    http://blogs.technet.com/b/puneetvig/archive/2012/10/16/switch-between-full-and-core-in-windows-server-2012-using-powershell-3-0.aspx
    Windows Server Installation and Upgrade
    http://technet.microsoft.com/en-us/windowsserver/dn527667.aspx
    Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

    Hi,
    Brian is right, for mange the Server 2008r2 sp1 we recommend use the Windows 7 or 7.1 platform.
    More information:
    Remote Server Administration Tools for Windows 7 with Service Pack 1 (SP1)
    http://www.microsoft.com/en-us/download/details.aspx?id=7887
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

Maybe you are looking for