W3C Log Format
Does W3C log format gets affected by changing the mode of Ironport web security S170 from Forward mode to Transparent mode ?
Hi Saurabh,
That field is to log the custom header for youtube (for edutcation), There is a documentation bug #
CSCzv54395 about this and this why you do not see it under the custom field table. FYI : it shows up as -- on the user guide
%XP
Unrecognized header. Use this field to log extra headers in client requests. This supports troubleshooting of specialized systems that add headers to client requests as a way of authenticating and redirecting those requests, for example, YouTube for Schools.
We are in the process of fixing this.
I hope this helps.
Regards,
-Puja
Similar Messages
-
Hello,
I am rather new to BEA, and I am experiencing a little bit of a problem here. I am trying to configure the access logs in order for them to generate output concerning Browser information. I have gone through and was successfully able to change the configuration to extended. The browser information is now displayed.
I have one MAJOR problem. When using the common log format, the usernames are logged just fine. But when I changed to the extended format, I only get a value of '-'. I believe all of my configuration is correct according to w3c standards, as I am using 'cs-username' in the '#Fields' directive. I have been searching all over for information reguarding how this field can be documented, but I cannot find anything.
I have even gone out and tried to configure our apache logs to read this field, and yet I get the same '-' value there as well.
If anyone could PLEASE help me in this matter, I would greatly appreciate it, as I am going down a river without a paddle on this one.
Thanks in advance,
Garret<p>Hello,</p>
<p>Have you read through common log format doc and Enabling and Configuring HTTP Access Logs? Oddly they don't mension cs-username in the supported field identifiers section. You could try the common log format field name: auth_user. Or a custom identifier. I would also raise a support case with BEA if you don't get anywhere to make sure they do actually support this field.</p>
<p>
Hussein Badakhchani</br>
</p> -
Hi, I have been asked to log and report data that is application specific. Rather than maintaining yet another application log I was hoping to make use Extended Log Format and have all the information wriiten to my existing web logs.
I was wondering if WLS 8.1 supports Extended Log Format and if so how would I go about configuring it.
Thanks in advance.
Lisa.Hello,
WebLogic Server does support extended log file format, version 1.0, as defined by the W3C.
All you have to do is add a few directives to the log file itself. For complete instructions see:
http://e-docs.bea.com/wls/docs81/adminguide/web_server.html#113870
(scroll down a bit)
Cheers,
Hoos -
Hi DBAs,
I have 2 Archive destination. My archive log format is ARC%S_%R.%T
But In my 1 location E:\app\Administrator\product\11.1.0\db_1\RDBMS format shows ARC00025_0769191639.001
2 location shows E:\app\Administrator\flash_recovery_area\BASKAR\ARCHIVELOG\2011_12_08\O1_MF_1_25_7G15PVYX_.ARC
SQL> select destination from v$archive_dest;
DESTINATION
E:\app\Administrator\product\11.1.0\db_1\RDBMS
USE_DB_RECOVERY_FILE_DEST
My Question is that, I am using this format only ARC%S_%R.%T
but it shows different format in each location. May i know what 's the reason behind this?
Thanks in AdvanceIf you are using other archive destination other than FRA it will creates as per LOG_ARCHIVE_FORMAT,
and the FRA configured then the archive format for FRA is O1_MF_1_25_7G15PVYX_.ARC
from your query it is clear that there are two destinations are configured, So if you dont want *.ARC* files, you have to disable FRA.
But recommended to use FRA easy to manage. -
Hi all
I have a confusion regarding the log format of cisco ASA.
The format of log that I have is
6|Mar 15 2013 12:01:25|109025: Authorization denied (acl=xxx) for user 'xxxx' from xxx.xx.xx6.53/137 to xxx.xx.xxx.255/137 on interface Outside using UDP
but according to cisco reference the format should be
May 2 23:07:23 10.160.205.10 %ASA-6-302015: Authorization denied (acl=xxx) for user 'xxxx' from xxx.xx.xx6.53/137 to xxx.xx.xxx.255/137 on interface Outside using UDP
I just want to know why my log for mat differs from cisco specification.
Can anybody please help me??
thanks
Bijayhi,
U will find the Char format <BD> in char fomats along with Barcode format.
if u don't find them there then reimport the script from client 000 and see.
You can the find that in the Character formats radio button and there itself you can see the barcode option.
reward if helpful
regards,
sravanthi -
How to set access.log format to "combined"
Hello,
I'm trying to get AWStats working on Solaris and have that working fine, but to get more information, I need to set the log format to "combined".
Question is: is there a way to modify what is output in the access.log?SHOULD I RECOMPILE and specify the access method?
Should i change line 1131 in db4.cpp to DBTYPE type = DB_QUEUE; ??? -
Hi,
I need to set my Apache logs to combined for AWStats to work. In 10.6 server admin there seems to be no place to change the log format. Can any one tell me how I do this? I have multiple sites hosted so will I need to do it for each site?
Thanks
PaulYou'll need to change it directly in the config file for each site. They're in /etc/apache2/sites, with names starting with a site ID number and ending in .conf. You need to change the CustomLog directive to something like
CustomLog "/var/apache2/access_log" combined
...and then restart Apache ("sudo apachectl graceful" will do the trick). -
Hi everybody
The log entry format of petstore 1.4 is of the form:
150.0.0.1 - - [02/Feb/2006:00:32:38 +0530] "GET /petstore/item.screen?item_id=EST-16 HTTP/1.1" 200 9739
I want to change this log format so that it includes session id information too...how do i do that.....Looks like the bug CSCin07036.
-
I've been syncing three computers and my iPod with no problem for years. I've just had my G4 iMac monitor replaced, and ever since when I try to sync this machine I get the message "change log format error INTERNAL ERROR: unhandled error (change log format error)" and I can't sync. Any help would be appreciated.
G4 iMac Mac OS X (10.3.9)Yes, you just need to add the option -showdate into the ttendaemon.options file.
</p>
Please check out the section on Modifying informational messages in the Operations Guide.
</p>
Simon -
How can i change asa5520 logging format?
Hi!
I have a question about Firewall logging format.
I use ASA5520, Cisco Adaptive Security Appliance Software Version 8.2(5) Device Manager Version 6.4(7)
Now display logging format is "
%ASA-session-6-302013:
%ASA-session-6-106015:
I want change to this logging format "
%ASA-6-302013:
%ASA-6-106015:
only confirured about log command.
logging enable
logging emblem
logging trap debugging
logging asdm notifications logging host outside 10.x.x.x 17/30516
How can i change format?
thanks !!Georgi, the company profile has a Default Locale. Also each user can have their Locale. The US format of MM/DD/YYYY can not be changed to October 6, 2010 as an example.
I would recommend that you submit a enhancement request to CRM On Demand customer care. -
Data log format like JDK logging
Hello:
I'm working with SUNONE AS
Source classes belong my application use Java logging ( JDK 1.4.2 ) , but logs ( in instance's server.log ) don't be written in Java logging format, i.e, class name & method name where log method ( by example, info() ) call is invokated
How can I do for logging calls into my code to write in Java logging format ? How I can to configure my SUNONE AS ? Must I change logging properties file in jre/lib ?
Thanks in advance
Best regardsHi,
I think you change the format as you using TraceFormatter class.
According to the pattern you give in the constructor your format will change.
It is that pattern that determines.
Regards,
Srinivasan Subbiah -
Just looking for opinions on what everyone is using for log formating.
We are looking at log analysis tools and some require different log formats.
We are currently using extended2 log format.
TIA.
joe.Extended2 seems to be a popular format. Quite a lot of people seem to use the default
format plus a few useful parameters like "cache finish status", etc, added. -
I am on single node asm with 10gr3. I changed the arch log format to %t_%s_%r.arc but the files are still getting created as thread_1_seq_90.459.653928775
I have bounced the db already.
SQL> show parameter archive_fo
NAME TYPE VALUE
log_archive_format string %t_%s_%r.arc
SQL>
What else to be setup in order to correct the format?
Thanks.I believe what you are observing is Alias created by Oracle.
Check logs available at your destination defined by "log_archive_dest_1"
e.g In my case it is +DATA/test
ASMCMD>cd DATA/test
ASMCMD> ls
1_7_653875700.dbf
2_6_653875700.dbf
Now I switch to directory storing alias
ASMCMD>cd ARCHIVELOG
ASMCMD>cd 2008_05_06
ASMCMD>ls
thread_1_seq_7.425.654030021
thread_2_seq_6.363.654040811
Is it clear?
-Amit
http://askoracledba.blogspot.com/ -
hi,
can anybody tell me how i can change the log format in weblog5.1
to NCSA format (extended)
Regards,
BibinLooks like the bug CSCin07036.
-
Does iPlanet v6 support the Extended Log format [http://www.w3.org/TR/WD-logfile.html]?
If so, would anyone recommend using the time-taken field to monitor page download times?Web Server does not directly support the Extended Log Format. In most cases, however, the flex-log format that Web Server does support can be manipulated to log the same data in the same order as the Extended Log Format.
If you want to request time from Web Server then do this:
1) Enable Statistics Gathering in the server (see the Performance and Tuning Guide for details), and
2) Add \"%duration%\" to your flex-log init line in the magnus.conf (or via the Log Format Adming UI screen).
This will log the time taken for a request to be completed to the access log.
Maybe you are looking for
-
Firefox always opens a new window with ad.yieldmanager
As soon as i click on an image or other views on a website firefox opens a new tab with adyieldmanager and i cant get rid of it.
-
Front panel freezes using custom XControl
So here's the situation: I wrote an XControl using an external library (camera control functions). The control works as it should work. So I use it in a VI and save this file. Reopening the file causes the front panel to freeze. Why? When I restart l
-
Doubt : retaining the value between the calls
hi, Which statement would you use to declare a variable, within a Function Module/Form-routine, so as it will retain the value between the calls?" Gaurav
-
[Problem] Repeated showing the Password Message of my Apple ID at AppStore.
Hi every body! I've a problem with my MacBook Pro, that is an error with downloading applications from AppStore. I want to sign in to my Apple ID then the message of Password requirement repeating show to me! so I can't download any thing! After that
-
Display addition of credit and debit amount at end of column
hi experts i am developing a report where i want addition of credit amount and debit. i am trying but the addition is not correct. op is gl no ,disc credit ,debit. eg. gl_no description credit debit 1232 khgkhdflhg 345