W3c valid site, initially no error reported by developer toolbar. But upon right click (giving the validation menue), the the toolbar reports two errors: width and height. Despite the fact that every page is validated! On the forum for the toolbar, this i

w3c valid site, initially no error reported by developer toolbar. But upon right click (giving the validation menue), the the toolbar reports two errors: width and height. Despite the fact that every page is validated! On the forum for the toolbar, this is said to be a Browser error. So, how can this be fixed? I'm using FF 3.6.6
== This happened ==
Every time Firefox opened
== after update from 3.5?

Hi Sara,
Can you give us the URL of the page you're having problems with and of the forum thread you mentioned?
Thanks!

Similar Messages

Hi, I am going to buy a new iMac desktop. I am going for the 3.4GHz Quad-Core Intel i7, 16 GB RAM and 2TB ATA Drive. I want to know whether I should go for the dual drives option i.e including the 256 GB SSD. I do a lot of 'heavy' media work. Brian

Hi, I am going to buy a new iMac desktop. I am going for the 3.4GHz Quad-Core Intel i7, 16 GB RAM and 2TB ATA Drive. I want to know whether I should go for the dual drives option i.e including the 256 GB SSD. I do a lot of 'heavy' media work.

by looking at the specs the laptop is better but if your not a gamer or graphics designer then you most likly wont notice a difference in the performance at all so with that said a few downsides
the processor is i5 the i7 processor is the better processor the graphics card has half the dedicated memory that the laptop has and the hdd compared to the solid state is not much of a difference unless you wanna move your computer all the time you wont need a solid state drive
but like i said before if your not a gamer or graphics designer on your computer you will not notice the difference most likely

The last few days I have begun to get alerts that every page I go to is susceptible to the Heartbleed virus even though I have changed passwords, etc.

Several weeks ago I added the Heartbleed Virus Monitor - o.2.1. I also changed a number of passwords.
Understood that main sites like Yahoo, bank, Outlook, gmail, etc. had already taken steps to guard against the virus. Several days ago, I began to get notices from the Monitor in the lower right corner of my desk saying that each page I went on was susceptible to the virus. Do I need to do something else to be safe. Is the add-on not working correctly?
Please help, if possible.

Who is the issuer of the certificates?
You can retrieve the certificate and check details like who issued certificates and expiration dates of certificates.
*Click the link at the bottom of the error page: "I Understand the Risks"
Let Firefox retrieve the certificate: "Add Exception" -> "Get Certificate".
*Click the "View..." button and inspect the certificate and check who is the issuer of the certificate.
You can see more Details like intermediate certificates that are used in the Details pane.
If <b>"I Understand the Risks"</b> is missing then this page may be opened in an (i)frame and in that case try the right-click context menu and use "This Frame: Open Frame in New Tab".
*Note that some firewalls monitor (secure) connections and that programs like Sendori or FiddlerRoot can intercept connections and send their own certificate instead of the website's certificate.
*Note that it is not recommended to add a permanent exception in cases like this, so only use it to inspect the certificate.

No forum for the Maxx?

I assume this is the correct forum for the Razr Maxx? I assumed I'd see a separate forum.
Thanks
Stephen

Keep us posted...
Well, I've had so much misinformation and receipts from the Original Verizon store, that when I attempted return/exchange items at 2nd store (closer to work than home), that the second Verizon store couldn't make heads or tales of what was going on with my accessories and the receipts that I presented to them. They encouraged me to return to the 1st store... because apparently the correct item for my MAXX showed on my receipt, but the item I was given was not matching up. *SIGH*
In a nutshell, yes, They sold me the incorrect Car Mount, per the picture provided by B33, it was missing the "MAXX" name on the box... I think my sales rep was a bit confused. Sadly, you'd think they'd get that right at the store when you are purchasing all the items at one time, with a new phone.
The Vehicle Navigation Dock was returned, as my wife is not going to want to de-case her Maxx every time she get's in the car and wants to put it in that mount. I opted for the 'generic' vent mount that is similar to a generic cigarette mounted mount that i use in my car.
Item I use: powerMOUNT - Power Socket Mount for Portable Devices
http://www.scosche.com/consumer-tech/product/2081
Item purchased at the Verizon Store for a vent mount solution: Vent/Adhesive Combo Mount
http://www.verizonwireless.com/b2c/store/accessory?action=accessoryDetails&archetypeId=10150&accessoryId=41242&initialPhoneId=5844
I've not pulled the Vent/Adhesive Combo Mount out of the box yet, so no comments on it yet.
As for the HD Dock.. I got it home... it fits only with the phone out of the case. From what I see,it's not going to fit with any case on the MAXX. I was not willing to remove my case every time I wanted to use the DOCK.
Then... I didn't see what the HD Dock was going to do for me.... what value would it provide, sure, I can put my screen on my large HD TV... buy scrolling around the screen using the Maxx's touchscreen was not a pleasant experience. Did not see why I would want or need to do so. (I can use the HDMI cable I purchased for use with that dock, to go directly to the TV if I ever need to...)

A forum for the Oracle Store?

Is there a forum for the Oracle store?
I'm trying to make a purchase (give Oracle some more revenue) and the store keeps crashing when I log in.
It would be nice to provide feedback and have some form of discussion around the store.

Did you try Oracle Partner? I usually get better discount from them than Oracle sales rep.
For example
http://www.pro-dba.com/pricing.html
they claim to offer discount on Personal Edition too.

Please help me :How to set the width and height for my View page "test.htm"

Hi,
    I have controller class. When i call the view[test.htm]from this controller class ,i am getting the view with output tableview..it is fine.
My requirement:
             the output view window is showing full browser window. I want the view output like showModeldialog. I want to set the width and height for the output view window. How is possible?
             or
i want to call the test.view in the window.showModelDialog..
Please help me .. Urgent requirement.

Yes you can set the width & Height of the view as follows..
<div style="width:580px; height:750px; margin-top:15px; overflow:auto;">
<htmb:form......>
</htmlb:form>
</div>
<i>*Reward each useful answer</i>
Raja T

Change the width and height of Landscape Layout for a report in 10G

Hi,
I'm new to reports and when i built the report in report builder 10g, the layout orientation was 'Landscape', hence I assumed that it'll be a landscape layout.
However, the width and height fields of the main section are 11 and 20 respectively. However, the height should ideally be 8.5. When i try to change it I get the following error message :
Layout canvas must remain large enough to fit layout objects.
Could you please tell me how to change the height of this landscape layout to 8.5 from 20.
The report has several main frames within a repeating frame, since the same report has to run multiple times.
Is it possible to have a repeating page across pages (crossing the horizontal margin) and hence have some of the main frames move down to the next page. I'm trying to do this to then be able to reduce the height of the main section of the report to 8.5. Its not working though because I'm getting the following error :
REP 1814 : Report cannot be formatted. Object "vertically" can never fit R_Main (the name of the repeating frame enclosing all objects)
Thanks,
Priyanka

To reduce the Hieght, first make the layout design fit into the new value..

HT201363 I forgot the security question and did not reach me any e-mail from an email technical support for the alternative I hope to help

I forgot the security question and did not reach me any e-mail from an email technical support for the alternative I hope to help

Alternatives for Help Resetting Security Questions and/or Rescue Mail
     1. If you have a valid rescue email address, then use this procedure:
         Rescue email address and how to reset Apple ID security questions.
     2. Fill out and submit this form. Select the topic, Account Security. You must
         have a Rescue Email to use this option.
     3. This is the only option if you do not already have a valid Rescue Email.
         These are telephone numbers for contacting Apple Support in your country.
         Apple ID- Contacting Apple for help with Apple ID account security. Select
         the appropriate country and call. Ask to speak to the Account Security Team.
Note: If you have already forgotten your security questions, then you cannot
         set up a rescue email address in order to reset them. You must set up
         the rescue email address beforehand.
Your Apple ID: Manage My Apple ID.
                         Apple ID- All about Apple ID security questions.

My toolbar is missing and there is a button where it used to be that says "Please re-install the Toolbar" but when I click on it nothing happens? Also when I start Firefox I get a script running error how do I solve these issues?

My toolbar is missing and there is a button at the top left that asks me to "Please re-install the Toolbar" but when I click on it nothing happens???
Then when I start Mozilla I get a long delay before it launches and a script running error "A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete.
Script: chrome://tavgp/content/libs/include.js:595"
How do I solve these issues???

No idea - and you provide no clues
what version of iPHoto do you have? Of the OS? is the iPhoto icon you are speaking of in the Dock?
re-read your post and try to provide information using standard Mac terms since we can not see you or your computer and only have your worrds to let us try to help you
Somehow my "IPhoto" icon now says "Preview". When I click on "Preview" nothing opens up except the bar says Preview. When I click on the Preview on the bar, a box opens up with different items, except when I click on any of them, there is nothing there. The only thing that work is the "quit preview". However, it is still there where my IPhoto icon should be. I can't get into my IPhoto. How do I get rid of this "Preview" and how did it end up taking over the IPhoto icon???
If you go to your Applications folder and double click on iPhoto what happen?
LN

Every Shipping point has corresponding number range for the HU box number?

Hi,
Every Shipping point has corresponding number range for the HU box number assignment?
For example, we are doing packing, then a Handling Unit number has been generated. So where to define this number range of the HU number??
Is it from the SPRO or controled by programs.
Thanks.

Hi,
Please find good stuff on Handling Units Below:
HANDLING UNITS CONFIGURATION:
A Step by Step Guide to the SAP Handling Unit Management Configurations
The SAP Handling Unit Management system allows you to manage the entire movement of the handling units and the materials they contain rather than tracking each material individually.
This paper is for the HUM Delivery although some of the contents is related to Inventory under the Logistics General modules.
Table of Contents
Objective
IMG Menu The Starting Point
Handling Unit Management Overview
Start of HUM Outbound Deliveries Manual Packing Configuration
Define Number Ranges for Handling Units
Define Packaging Material Types
Define Material Group for Packaging Materials
Define Allowed Packaging Materials
Use Handling Unit Supplements
Maintain Goods Movements for Handling Unit Stock-Posting
Define User Status Profile
Set QM Check and Delivery Type for Each Movement Type
HU Requirement for Storage Locations and Default Values for Deliveries
Packing Control By Item Category
Define Requirements for Packing in the Delivery
Delivery Type Determination
Set Unique Number Assignment for HU Identification
Number Range Maintenance for HU Identification
Define Number Assignment for Each Packaging Material Type
Delivery Output type for Packing List
Maintain the Delivery Output Determination Procedure
What else to maintain after the Manual Handling Units Configurations?
Start of the Automatic Packaging Configuration
Define Number Ranges for Packing Instructions
Define Determination Type for Packing Instructions
Define Number Ranges for Packing Instruction Determination Records
What else to maintain after the necessary Automatic Packaging Configurations?
Appendix A: How to do Manual Packing for Non-Assigned Handlings Units?
Appendix B: Scenario 1 How to do Manual Packing by Delivery Item?
Appendix C: Scenario 2 How to Manual Pack the Materials into Pallets?
Appendix D: How to do Automatic Packing?
Appendix E: How to do Goods Movement for Handling Unit Material?
Appendix F: How to Unpack the Handling Unit Material?
A handling unit is a physical unit that consists of the packaging materials (load carrier / packaging material) and the goods contained therein. A handling unit is always a combination of materials and packaging materials. All the information contained in the material items, such as batches and serial numbers, is always available by way of the handling units.
Handling units can be nested, meaning that you can also create new handling units from several handling units as often as you like.
Handling units have unique, scannable identification numbers that can be formed according to standards such as EAN 128 or SSCC.
Figure 1: Handling unit example
Structure
The handling unit object contains the following attributes:
     Identification number
     Dimensions
     Weight
     Volume
     Status
     Materials and quantities
     Packaging materials
     Packing instructions
A handling unit consists of a handling unit header and handling unit items. For identification purposes, it is given a unique number.
Handling unit header
The header data of a handling unit is divided in the following way:
     Weight/Volume/Dimensions
     General data
     Means-of-transport data
     Additional data
     Output determination procedure
For more information about each of these detailed points, see Editing detailed data for handling units.
Status
The handling unit is linked to general status management. In this way, the various physical states (planned or implemented) and other attributes (weighed, loaded, blocked or posted goods issue) of handling units can be documented.
You can use the HU_ST_INIT user parameter when you create handling units without object reference to set which initial status the handling unit is to have when it is created.
If you want to implement a status of your own, you can define a user-specific procedure for the packaging material type (see also Define Packaging Material Types).
Handling unit item
The items of a handling unit can consist of material items, packaging materials or other handling units that appear in an overview. For more information about this overview, see the Contents section of Editing detailed data for handling units.
To access the item data of an individual handling unit, select the handling unit concerned and choose Goto  Detailed HU data  Contents.
Integration
Handling units can be used in all processes within the supply chain.
Please Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula

How to change the width and height of the visible part of the of the report

I have define a report with paper size 'Letter', orientation 'landscape' and 30 columns. Dynamically I am changing width of columns and suppressing many columns of the report.
Mostly using first 16-20 columns and others get suppressed.
Now problem is that when navigating the report thru crystal viewer, a huge blank spaces getting display on right of the report. When we take jump to some part of report thru navigation tree, the whole report gets shifted to left and only blank part is visible and it is required to scroll left.
Even printing is not working correctly.
Is there any way to change the width and height of the visible part of the report in the viewer thru .net classes? Setting the width and height of the report in Load event handler doesn't help.
Example: CrystalReportViewer1.Width = 200; - is not helping.
Is there any other solution?
Please let me know.
Thanks
Mahesh Patel

Hi Yogesh,
Your suggestion 'reportDocument.PrintOptions.PaperSize=PaperSize.PaperLedger;' along with 'PaperOrientation' setting as follow works fine. I tried to switch between Landscape and Portrait depending on report width.
reportDocument.PrintOptions.PaperOrientation = PaperOrientation.Landscape;
But problem with crystal viewer remain as it is.
While navigating report thru crystal viewer, when we take jump to some part of report thru navigation tree, the whole report gets shifted to left and it is required to scroll left.
Thanks for your very good suggestion.
Mahesh Patel

I have just getting a new phone and I have forgot my password an Apple ID what I made new for the new phone now I cannot get on it because asking for id and password what should I do help plz thank u

I have just getting a new phone and I have forgot my password an Apple ID what I made new for the new phone now I cannot get on it because asking for id and password what should I do help plz thank u

Try
https://iforgot.apple.com

I have a hard drive for CD storage that needs to connect to the Ethernet router. sInce my router is not in this room, and in another room, I want to use my Mac as a router for the drive, and share the wifi. Ho do I do this

I have a hard drive for CD storage that needs to connect to the Ethernet router. sInce my router is not in this room, and in another room, I want to use my Mac as a router for the drive, and share the wifi. Ho do I do this? I gace tried the System Preferences -> Sharing, shared internet to Ethernet, but can't se ethe device on Finder

Djembe wrote:
UEFI (unified extensible firmware interface) boot requires Global unique identifier Partition Table (GPT) as opposed to the older Master Boot Record (MBR). If your existing drive is formatted in MBR, you will need to adjust BIOS settings to enable legacy boot in order for it to work properly.
Is there a performance difference between GPT and MBR? If GPT is better, I do not mind formatting the drive with it.
5. No special drivers are needed.
Thanks. What about the thunderbolt port?
7. I think Lenovo estimates 6 hours.
Lenovo says 6 hours with the 6-cell battery on its website.
BrendaEM wrote:
Hi,
There was a serious BIOS/UEFI problem with that SSD . Perhaps this thread will save you some headaches. Someone is recomending shutting off Rapid Boot in the setup, which would probable mean little with a SSD, anyway.
I read through this, and it looks like the problem was fixed in a BIOS update, which I plan to do. However, it also seems like Intel Rapid Start is not even worth it in the first place, as sleep consumes almost no power at all.
W540: i7-4700mq, K2100m, 8 GB DDR3L, 512 GB SSD
T510: i7-620m, NVS 3100m, 8 GB DDR3, 512 GB SSD

I created a book on iPhoto. I click on the buy button, and I get a connecting message with a blue striped rectangle. I am connected to the internet and I have made books before without any problems. I have tried for the past two weeks at various times.

I created a book on iPhoto. I click on the buy button, and I get a message that says Connecting with a moving blue striped rectangle. I am connected to the internet and I have made books before without any problems. I have tried for the past two weeks at various times and I get this same message each time. Any ideas about what is going on?

First confirm that you can create a PDF file of your book as described in this Apple document: iPhoto '11: Preview a book, card, or calendar before you order or print it. Post back with the results.
OT

I just upgraded my iPhone 3GS to 4.3.5 and my universal doc stopped working with it? It has worked flawlessly for the last year and suddenly I get the message: "this iphone is not optimized for this device." The music comes out too quiet to the speakers

I just upgraded my iPhone 3GS to 4.3.5 and my universal doc stopped working with it? It has worked flawlessly for the last year and suddenly I get the message: "this iphone is not optimized for this device." I dismiss the message, but the remote no longer works with it and the music is too quite to the speakers. The remote works fine with my Macbook Pro. I tried a restore on the iPhone and started from scrach, but the same problem exists.
Any help with this?
Thanks,
JT

yep... my iphone 4 also having problem like astoker.. u see on dock pin using torch light.. i found 2 pin touch each other.. i solve my problem ready.. thanks wjosten.

W3c valid site, initially no error reported by developer toolbar. But upon right click (giving the validation menue), the the toolbar reports two errors: width and height. Despite the fact that every page is validated! On the forum for the toolbar, this i

Similar Messages

Maybe you are looking for