W3wp.exe using 100% user time and 0 % priviledge time

Hi all
We deployed application (enhancements) which is developed with ASP.NET with C# code behind.
After deploying in Application server we are getting problem
Like "w3wp.exe using 100% user time and 0 % priviledge time"
Please help me regarding what may be the problem.

How to trace web URL ?
Refer:
http://www.microsoft.com/technet/prodtechnol/WindowsServer2003/Library/IIS/c56d19af-b3d1-4be9-8a6f-4aa86bacac3f.mspx?mfr=true
http://forums.iis.net/t/1146821.aspx
Regards, RSingh

Similar Messages

I upgraded to iTunes 10.5 on XP and now it and applemobiledeviceservice.exe use 100% CPU. How do I fix this?

I upgraded to iTunes 10.5 on XP and now it and applemobiledeviceservice.exe use 100% CPU. How do I fix this?

When I called Apple Support to ask about the 100% CPU usage, they wanted to charge me because my Ipod was out of warranty. I insisted on talking to someone and finally got to talk to a software engineer for free. He said that he had never heard of the problem in his three years at Apple. Nonetheless, he sounded really interested and suggested that it might be a conflict with anti-virus software. I deleted the antiviruse and that DID NOT HELP AT ALL.
It seems as if Apple could care less. There is no official response. Their primary response is to look at the Forum. At least you find out that the problem isn't your fault, it really is Apple!!!!
So far the best solution is just to delete iTunes and use Mediamonkey to sync your pod.
Apple, please fix this!!!!!

Appplications using "Administrator" user id and password in J2EE engine...

All,
We have a EP 7.0 with SPS 14. Our "Administrator" user id account gets locked every now and then.
Eventhough if we unlock it or change the password using configtool, it works for sometime..but,again the "Administrator" user id account gets locked.
Somewhere some application is still using the old password. So,no matter what password we use or we updated the password everywhere..it works for some time and again the its getting locked.
Can anybody tell me how to find all the applications using "administrator" user id and password or the applications which requires administrator user id directly or indirectly.
Is nwds and nwdi deployment uses the "administrator" uidpw ?
Note: We have already tried with updating the password using configtool and updated the password all the places.it works for some time and it gets locked again..Please help..Thanks.

to Michael Nicholls
Addy 365 posts:
We have already tried with updating the password using configtool and updated the password all the places
Yes from log it looks like impossible to check, but you can determine immediately whether the blockage occurs after restart, or only at certain times of the launch of a job ....
To Addy 365
search after restart the lines in security log like
LOGIN.FAILED, and try to recheck ol RFC from all other system's you have in your enterprise ....
P.S. first check are you have any available RFC listeners in JCO RFC provider.
To Michael Nicholls    in ABAP side we can check in sm21 from with terminal blocking occurs, why Why the same is not implemented in JAVA? Or for this need special tool like Wily Introscope ?
Regards.

We are having sync issues when trying to use separate user accounts and Apple ID's on the same iMac. What can we do?

My wife and I share an iMac and we each sync to it using separate user accounts and separate Apple IDs. She has an iPad 2 and I have an iPhone 4. We upgraded the mac to Lion and the iphone to OS 5. Now itunes only recognizes my apple id no matter which user is logged in. Now if I download the Home Depot app to my phone it automatically gets pushed to my wife's iPad, which she does not want. We want to keep things separate. How can we do this?

You can sync devices with the same iCloud ID, not seperate ones.
If she has a different login on your Mac, make sure she has her own ID defined in System Prefs > iCloud

*when we use at user -command and give smaple code fro at user-command*

Hi experts,
i am new to abap can any body tell me when we use AT USER-COMMAND and give a sample code for that.
point will be rewarded.
thanks.

Hi,
AT USER-COMMAND is a list Event.This Event is triggered when user make an action on the Application Toolber Or Menubar.
Here is the Program.
START-OF-SELECTION.
SET PF-STATUS 'TEST'.
WRITE: 'Basic list, SY-LSIND =', sy-lsind.
AT LINE-SELECTION.
WRITE: 'LINE-SELECTION, SY-LSIND =', sy-lsind.
AT USER-COMMAND.
CASE sy-ucomm.
WHEN 'TEST'.
WRITE: 'TEST, SY-LSIND =', sy-lsind.
ENDCASE.
This program uses a status TEST, defined in the Menu Painter.
Function key F5 has the function code TEST and the text Test for demo.
Function code TEST is entered in the List menu.
The function codes PICK and TEST are assigned to pushbuttons.
The user can trigger the AT USER-COMMAND event either by pressing F5 , or by choosing List -> Test for demo, or by choosing the pushbutton 'Test for demo'.The user can trigger the AT LINE-SELECTION event by selecting a line.
Hopr This Will help You.
Regards,
Sujit

I am using the user name and password given to me by

I am using the user name and password given to me by Virgin on the email 'other' , after the initial page it comes up with IMAP settings which I don't have so I click on the POP page and give all the settings listed by Virgin on ints website (using ntlworld and not virgin as instructed) but it still comes up with 'Unable to Verify' So something is sticking somehwere but I don't know where!
Thanks very grateful for assistance

Try going into Settings > Mail, Contacts, Calendars and select that email account and try re-typing in the account's username and password

HT204053 Using multi-user IDS and passwords to access the apps website is turning me into an Apple hater, frankly. Am I alone in the crowd of users?

Ihave abouy 4-5 different user IDS and passwords that I have to juggle to get access to the Apps store. Almost every time I try to get an update, etc., I have to go through the routine of either changing both user ID and password, or just the password. I am a long-time Apple customer but have drifted as far as possible from using Apple updates and purchases. It's just not worth the time, exasperation and energy involved. I can understand that Apple doesn't want to have varied IDs wrapped into a single ID, but it would be helpful if Apple took the time to delete all but one user ID, upon the request of an Apple customer, instead of spending so much time issuing yet another iPad and iPhone. At least, have mercy on some of Apple customers who are still buying snd using laptops and desk tops. HELP!!!

I'm not sure how you came to have so many Apple IDs, but I'd suggest that you simplify things.
I just checked the "Apple ID Support" page:
http://www.apple.com/support/appleid/
as I imagine you have, too, and I find no instructions for closing or deleting an Apple ID, but you could simplify things quite a bit by using only one Apple ID on all of your devices.
It will take a bit of time, but I think you'll find that it's worth it.
If I were you, I would just delete all purchased apps (if you've purchased music, that's a whole different issue - but you could probably simplify your music purchases, too) from all devices accept one - your most "important" device - and log out from all other devices. Then log in from those other devices using your preferred Apple ID, and reinstall the apps and other stuff.
It's going to be tedious, and it'll take some time, but I think you'll have a much better experience over the long term.
For one thing, you'd always be notified automatically to update/upgrade your stuff, and your log-ins to do so would be much easier.
I know it's not good news, but I hope it helps.

Use of user status and business actions

Hi all,
I'm new at status profiles, user status and business actions.
Currently we are using status profiles and user status for orders - but business actions aren't assigned to the user status. In a project I should evaluate whether we can use those business actions.
After reading a lot of documentations there is still one question left. What are the business-actions for and how can I use them?
Let's say I've a status profile with following user status with according business actions:
- status: new;   business action: to progress
- status: in progress;   business action: to confirm
- status: confirmed;   business action: decline or close
- status: closed;   business action: close
What happens when a user sets the status of an order to "confirmed"? Will be done additional checks for my order? - If yes: Wich checks will be done and exists there an API to effect these checks or to implement additional checks?
Regards,
Christian

Christian;
If you´re wanting to speak about Status Profile in OP. You can execute whole theses steps in T-code BS02, when in this IMG:
1. Enter a Status Profile.
2. Assign the status profile to an Object Type.
3. Define the User Status.
4. Assign Business Transactions to user statuses.
5. Translate the status profile and user statuses.
You can also to use this function to simulate the status development for a particular object.
To do this, select a status profile and branch to the screen "Allowed Object Types". Then place the cursor on one of the object types.
Using the function Extras -> Status simulation, you can simulate the status changes that could be caused by performing various business transactions, or by changing the staus manually, during the lifetime of the object concerned.
You can also branch directly from simulation to status maintenance for the object concerned, to display information on which transactions are allowed or disallowed in the current situation.
The log function records all the changes you simulate and allows you to navigate freely to see what effects these are having.
Status profile info
Using the function Extras -> Status profile info, you can display a list of all the entries you have made for a particular status profile. The list is structured as follows:
The first block contains the permitted object types.
The second block contains the user statuses.
The third block contains the following information for each user status:
which transactions it allows
which transactions it allows with a warning
which transactions it disallows.
I hope help to you
Regards
Luciano Nobrega

Colsvrcore.exe using 100% cpu load - how to debug ?

Hi,
I'm new to Zenworks and facing a high load issue on one of my Collection Servers.
Colsvrcore.exe goes 100% load after 30 sec and stays there.
My question is: How can i debug on this issue ?. I was thinking bad data or something could lead to this high load.
Regards
Anders Jensen

gf2e,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

A process java.exe uses 100% cpu

This problem stops me start database 10g on Windows XP. I am wondering anyone might have same experience before and could share how to fix the issue. Here is situation:
Every time when 10g database starts, a process java.exe which is loaded by nmesrvc.exe (I think it is OracleDBConsoleMyInstance, right?) uses 89% cpu forever. Because of this, OEM couldn't work! Shutdowning the database and restarting it didn't solve the problem. Killing nmesrvc.exe can stop the java.exe. SQL*Plus still works. But iSQL*Plus didn't works.
If I stop process OracleDBConsoleMyInstance from Services of Windows, I got error: Error 1053.
What is wrong here. Your help will be appreciated,

I had the same problem and was able to resolve it.
I am using 2 W2K3 servers, one for infrastructure and one for mid-tier (Portal). On the infrastructure machine I used the Administrative Tools -> Services Management Console and first stopped the OracleDBConsole, CPU was still 100% busy. Then I stopped the OracleINFRAControl and the CPU went to 0%. Then I restarted the OracleINFRAControl and then OracleDBConsole and now the CPU is hovering around 2%.
I ran some tests from another machine and everything seems fine.
Bill G...

Oracle.exe using 100% when loadjava

I have a problem when loading a jar file that pause at resolving stage for a long time. This is because the oracle.exe to use up 100% system resource. Could anyone tell me how large the jar file have to be inorder to avoid it? I had try to restart the system and it work only for one jar file after that my second jar file lead to the same problem again.

I have a problem when loading a jar file that pause at resolving stage for a long time. This is because the oracle.exe to use up 100% system resource. Could anyone tell me how large the jar file have to be inorder to avoid it? I had try to restart the system and it work only for one jar file after that my second jar file lead to the same problem again.

Skype using 100% of CPU and hard disk resources, c...

So, lately, I switched the hard drives in my computer to migrate from Windows XP and install Windows Vista to my machine, everything was going alright with my machine, until I decided to install Skype, as it's the main communications line with me and the internet, and I noticed it now takes up pretty much all of my CPU and hard disk resources when loading all of my contacts and messages after installation, but it finished loading them, and it still uses a high amount of my resources. Skype uses approximately 250MB of memory (Which is kind of high on a system like mine..), it maxes out the processor at around 95-100% utilization, and the hard drive light is on full, as I hear the read head spazzing out on the thing anyways. I was wondering, is this an issue with the latest version of Skype? I can't use older versions since Skype/Microsoft decommissioned them, and it won't even let me log in to them. Could someone possibly help me with this?
My machine specifications are as of follows if it has anything to do with the issue.:
MSI MS-6741 K8MM-ILSR MicroATX Socket 754 Motherboard
AMD Athlon 64 3200+ 2.00GHz Single-Core Socket 754 Processor (Currently overclocked to 2.15GHz)
PNY Nvidia QuadroFX 1100 128MB AGP 8x Workstation Graphics Card
Hynix DDR 400 PC3200 memory, 1.5GB (1GB + 512MB sticks)
Seagate Barracuda 7200RPM 200GB IDE HDD
Maxtor DiamondMax Pro9 5400RPM 80GB IDE HDD
Creative SoundBlaster PCI
Windows Vista Home Premium 32-Bit

So, lately, I switched the hard drives in my computer to migrate from Windows XP and install Windows Vista to my machine, everything was going alright with my machine, until I decided to install Skype, as it's the main communications line with me and the internet, and I noticed it now takes up pretty much all of my CPU and hard disk resources when loading all of my contacts and messages after installation, but it finished loading them, and it still uses a high amount of my resources. Skype uses approximately 250MB of memory (Which is kind of high on a system like mine..), it maxes out the processor at around 95-100% utilization, and the hard drive light is on full, as I hear the read head spazzing out on the thing anyways. I was wondering, is this an issue with the latest version of Skype? I can't use older versions since Skype/Microsoft decommissioned them, and it won't even let me log in to them. Could someone possibly help me with this?
My machine specifications are as of follows if it has anything to do with the issue.:
MSI MS-6741 K8MM-ILSR MicroATX Socket 754 Motherboard
AMD Athlon 64 3200+ 2.00GHz Single-Core Socket 754 Processor (Currently overclocked to 2.15GHz)
PNY Nvidia QuadroFX 1100 128MB AGP 8x Workstation Graphics Card
Hynix DDR 400 PC3200 memory, 1.5GB (1GB + 512MB sticks)
Seagate Barracuda 7200RPM 200GB IDE HDD
Maxtor DiamondMax Pro9 5400RPM 80GB IDE HDD
Creative SoundBlaster PCI
Windows Vista Home Premium 32-Bit

Cwjava.exe uses 100% utilization in LMS 3.1

We have observed that cwjava.exe process nearle utilizing 80% - 90% cpu utilization in LMS 3.1
It makes that LMS server responding slow.
Please tell how to overcome this problem.

On which platform is LMS running?
what size does the syslog file has?
If you have Firewalls sending logs to LMS, this could bring heavy load on the server.
Another issue could be the name resolution mechanism for syslog messages and a slow or even failing DNS for these requests.
In LMS 2.6 - LMS 3.0.1 this could be enabled/disabled in
Common Services > Server > Admin > System Preferences
But it seems that they removed this config point in LMS 3.1 - at least I cannot find it...
These log files could shed some light on this:
AnalyzerDebug.log
SyslogCollector.log
Also the defined syslog filters could have an impact and slow down the process.
As a last resort, you also can try to just restart SyslogAnalyzer and SyslogCollector process and see if the problem goes away. You should do this in a one-liner to avoid a manual resubscription of the SyslogCollector
# stopping the processes:
pdterm SyslogCollector SyslogAnalyzer
# control their state:
pdshow SyslogCollector SyslogAnalyzer
# starting the processes:
pdexec SyslogCollector SyslogAnalyzer

Multiple Accounts in 7.0 using Dynamic User Forms and Account Types

Guys/Gals,
We are attempting to implement the new way of handling multiple account types in IDM 7.0 and so far are coming up unsuccessful. We have managed to customize the Dynamic Resource Forms to create standard default AD accounts, however when we attempt to create different account types of AD(i.e type ADMIN account, or TEST account) we have a no go. We've made identity rules for the types of accounts we have, and the form displays the attributes, however when we go to save, the it attemts to update the default account, and not make the new account type. Has anyone implemented these new features? Any help or suggestions would be greatly appreciated. Thanks!

Were you ever able to implement this? I was told this was the way to handle multiple accounts for a user on a resource, but so far it's not making much sense to me, nor does it seem feasible. I was wondering if you had any success with it.

One of my bookmarks i cant get into using the user name and password alli get is the page timed out but i can get into the site by using internet explorer

When I try to get in the site all I get is session is timed out. How can i correct this

Try to navigate to that page starting with its home page in case you are using a bookmark.
Clear the cache and remove cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"

W3wp.exe using 100% user time and 0 % priviledge time

Similar Messages

Maybe you are looking for