W500 Blu-Ray Mat**bleep**a BD-MLT UJ232A will not recognize Blu-Ray DVD movie

Recently purchased W500 4061- W6U with Mat$hita BD-MLT UJ232A optical drive at Firmware level "TC02" will not recognize a brand new Blu-Ray DVD.  But will recognize and play a normal (non-Blu-Ray) DVD.  The system sees the Blu-Ray optical drive and shows it is working normally.  I attended to update the firmware, but the Lenovo Optical Disc Drive Firmware Update 1.6 utility, states the firmware is already at the current level and under the header New Firmware states "None".  Any ideas?  Thanks   
Solved!
Go to Solution.

It has nothing to do with the drive.
Blu-ray movies are encrypted using keys. Hackers break the keys. So new Blu-ray movies then come out using new keys. WinDVD (your Blu-ray playing software) contains the keys, and needs to be updated. So see if there's a WinDVD update available from Lenovo's site. If not, then you'll have to pester Lenovo to get a new update from Corel. You can't get the update from Corel yourself.
Or you can simply buy a better Blu-ray player program, such as Cyberlink PowerDVD.
Good luck!

Similar Messages

  • APE11 will not recognize any blu-ray media

    I have APE11 and attempting to burn a project to blu-ray. My problem is that APE11 recognizes the blu-ray burner but will not recognize any blu-ray discs. I have tried various BD-R and BD-R DL discs to no avail. I receive a "Media not present" message. If I select the same burner but choose to create a DVD, I receive a "Incompatible disc" message. This leads me that it sees the discs but I'm not sure what's up with the blu-ray option. The blu-ray discs are Verbatim and Windows recognizes the discs as well. Any and all suggestions are welcome.

    robertjeffrey
    What Blu-ray burner do you have? Is it recognized in the Device Manager under DVD/CD-ROM drives? Driver and Firmware up to date?
    What burn software came with the Blu-ray burner? If it is part of the CyberLink family, can you use the PowerProducer of the series to burn to Blu-ray disc format on a Blu-ray disc using these Blu-ray discs that Premiere Elements burn dialog is labelling "Media Not Present"? I would like to see the results of that test if possible.
    Just to get it out of the way (maybe helpful), let us flush the preferences...
    Assuming your Premiere Elements 11 is on Windows 7 or 8 64 bit....
    Local Disk C
    Users
    Owner
    AppData
    Roaming
    Adobe
    Premiere Elements
    11
    and in the 11 Folder is the Adobe Premiere Elements Prefs Folder that you delete. If that does not work, then delete the whole 11 Folder in which it exists.Make sure that you are working with Folder Options/Show Hidden Files, Folders, and Drives active so that you can see the path described.
    If that does not work, a complete Deactivation from Help Menu/Deactivate followed by the usual Control Panel uninstalled followed by reinstall may be in order. I am hoping the results from a CyberLink PowerProducer burn to may give us some valuable information so that we do not have to resort to uninstall/reinstall.
    Are you using BD-R 25 GB 2X? What is this BD-R DL? Is that the 50 GB for Blu-ray? Do you have any BD-RE 25 GB 6X? How much are you planning on putting on this Blu-ray disc in terms of Space Required and duration?
    Let us start here and then we can decide what next.
    Thanks.
    ATR

  • Brand new HP Photosmart 5520 from Apple. WILL NOT PRINT BLUE.

    Brand new HP Photosmart 5520 from Apple. Mod#CK042-64004  Ser#CN38K13242  WILL NOT PRINT BLUE.  No blue on alignment. Ran HP  Utility CLEAN PRINT HEADS several times.  Cartridge vent open and ink wet to touch.  Ran  HEAD CLEANING from TOOLs Printer several times wih 30 minute intervals.  Improved some but still only light blue streaks on printed test pattern.  Is there anyway to manually clean Print Heads?

    Hi
    As @Kevin_US_CA   has mentioned, it sounds like you've tried all of the usual steps recommended in the print quality troubleshooting document....
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03241743
    Best bet is to call HP Support as you may require a replacement printer. Could you please post back to let us know how you get on?
    Thanks, Ciara
    Although I am an HP employee, I am speaking for myself and not for HP.
    Twitter: @Ciara_B_HP

  • I don't have a phone plan, so I cannot text without wifi. I have been using iMessage to text my friends, until it stopped working. I can text my sisters email, but not my boyfriends iPhone. The send button will not turn blue. Help? Please?

    I don't have a phone plan, so I cannot text without wifi. I have been using iMessage to text my friends, until it stopped working. I can text my sisters email, but not my boyfriends iPhone. The send button will not turn blue. Help? Please?

    There is a problem with iMessage with what Apple says is a small number of iPhones and they are working on a fix. In the meantime try this:
    1. Settings > Messages > iMessage = Off
    2. Settings > FaceTime > FaceTime = Off
    3. Settings > General > Reset > Reset Network Settings
    4. Wait for the iPhone to Reboot
    5. Settings > FaceTime > FaceTime = On
    6. Settings > Messages > iMessage = On
    You may have to repeat the steps a couple of times.
      - with thanks to @deggie

  • I have a blue screen on my ipod 4g and it will not do anything? What do i do?

    I have a blue screen on my ipod 4g and it will not do anything? What do i do?

    Try resetting:
    Hold the home and power buttons at the same time until the Apple boot logo appears. No data will be lost.
    If that doesn't work, just let the battery drain. Once you charge it back up it should work as normal.

  • New P755 3dv20, will not recognize/play Blu-Rays

    It recognizes and plays regular DVDs just fine, but Blu-Ray's cannot be read either in Toshiba's video player or in Windows Media Player. Kind of defeats the purpose of having purchased a 3D laptop if I can't even play my 3D movies.
    The drive is a Mat**bleep**a BD-CMB UJ141EL, I can't find any manufacturer website for this company, nor can I find any driver updates for this device on Toshiba's downloads page or elsewhere. Has anyone else come across this problem?

    Satellite P755-3DV20 Specifications
    Satellite P755-3DV20 Downloads
    Before doing anything else, let's try this Microsoft Fix It:
    Fix problems with CD or DVD drives that can’t read or write media
    Let us know what happens. Good luck.
    Mike

  • Premiere elements 11 does not recognize blu ray burner

    Purchased Pawtec external blu ray burner. Premiere elements 11 recognizes it as a dvd burner but not a blu ray burner. How can I fix this?

    Long160
    There is no burn to folder for Blu-ray in Premiere Elements (any version), so we cannot use that escape route. What has been used in the past as a workaround for this "no burn to folder for Blu-ray" is creating a Blu-ray disc image with Premiere Elements in conjunction with a virtual Blu-ray burner with a virtual BD-RE disc. I have written about that in the following blog post
    http://www.atr935.blogspot.com/2013/11/pe12-disc-imagephantom-burner-pe.html
    But, as for the Pawtec external Blu-ray burner being recognized in the Premiere Elements 11 burner location in burn to Blu-ray,
    a. you may just have an external Blu-ray burner that is not compatible with Premiere Elements
    b. you could try for a Premiere Elements 11 uninstall/reinstall going the route of Deactivation with in the program (Help Menu/Deactivate), uninstall via regular Control Panel route, ccleaner run through (https://www.piriform.com/ccleaner), reinstall.
    Have you tried another USB port? Does the Blu-ray burner require one or two USB connections to have enough power for functioning?
    Also, do you have all you operating system updates?
    More later.
    ATR

  • HP Officejet Pro L7780 All-in-One Will Not Print Blue Ink - It Prints Pink Instead

    HP Officejet Pro L7780 All-in-One -
    Issue:
    Blue ink will not print (It prints the color pink instead.).
    Actions taken:
    1.  Cleaned ink heads.
    2.  Replaced ink cartrige.
    3.  Reinstalled software.
    Sugestions by HP customer service:
    Purchase a new printer: Because the issue is software related - not reading the blue ink cartrige.
    Any suggestions or advice would be very much appreciated.
    Thank you for your time!
    Thank you.
    Sincerely,
    Ryan

    The cyan portion of the printhead may be clogged.  I would suggest running the diagnostics shown here.  If three levels of cleaning of the printheads does not resolve the issue you may need a new printhead.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Ipad Air update to IOS 8.02( stuck in apple logo; turns blue every few minutes and starts over; itunes does not recognize it)

    Hi everybody,
    i updated my IPAD  bought in october 2013 to IOS 8.02.
    Now the IPAD only goes to the apple logo, every few minutes it blinks blue and starts over. I tried doing the home plus switch thing and it doesnt work.
    Itunes does not recognize the device either.
    Do you have any solution to this issue?
    Regards,
    Guillermo

    Hi Guillermo ..
    Folllow the instructions for recovery mode here >  iOS: Unable to update or restore

  • IPhone 4S will not recognize Q2 BlueAnt

    I got the iPhone 4S back in October and it would not recognize the Q2 BlueAnt Bluetooth. I read somewhere online (can't find it now) how to get it synced up by pressing and holding some buttons in some fashion, but now it escapes me.  My phone was stolen and replaced but now I can't get this new phone to recognize the Q2.  I know there is some sort of sequence I should be doing (think of Nintendo's "Contra" code) but I can't find it anywhere. Any help?

    I just upgraded from iPhone 3GS to 4S.  Initially the 4S could not find the bluetooth and the bluetooth could not find the phone.
    To get the 4S to recognize my Blueant Q2, I had to clear the pair list on the BlueAnt.
    http://www.myblueant.com/downloads/manuals/Q2_UserGuide_EN.pdf
    This didn't work on my first try; I had to carefully observe the instructions to quickly press all three buttons at once (vol +, vol -, and master control), without holding them down.  BlueAnt needs to announce that it has been reset.  After that, it immediately appeared on my phone's Bluetooth list.
    HTH

  • My supermulti blu-ray cd/dvd drive will not play or burn dvds...onl​y says no disc found...HE​LP?

    I cannot play dvds or cds on my supermulti blu-ray dvd drive.  hp mediasmart player says no disc found.....an hp support assistant troubleshoot found nothing wrong with the drive and several searches for drivers says that no updates are necessary in that area either.......i'm not sure what to do now.....

    try this: http://support.microsoft.com/kb/314060

  • Encore CS4 does not recognize Blue Ray External Driver

    I just bought a LG blue ray external drive writer which comes with Cyberlinks SW. From Premiere, I opened Encore to burn (build) a sequence on the LG Blue-Ray burner, but it does not work: - In En Project setting, the “Player” is grayed-out and only “Adobe Player” is displayed. - In En Build tab, when I choose the Format as Blue Ray and Output as Blue Ray Disk, the Build button is grayed out and Recorder shows None Found. However when I change the Format to DVD, the Build settings automatically change and the Recorder LG Blue Ray is shown. How do I make En to recognize the LG Blue Ray and burn in Blue ray format? Thanks, Vlad.

    There are many threads in the Encore forum regarding reasons that burners are not seen. Most of these problems can be traced back to specific software, and most of the rest have to do with how the hardware is set up. You can find most of these in the main forum, and the Burning DVD sub-forum, with a Search.
    First thing that I'd check is that your OS sees your hardware. In Windows, Control Panel>System>Device Manager. Check here (or within your OS) to make sure that it's just not a bad installation.
    Good luck,
    Hunt

  • Premiere elements does not recognize Blu-Ray disc, says media not present.  Under 12 I was able to record 3 blu-ray dvds using the same burner and discs I'm trying with 13.  What is the problem?

    I installed PE13 and cannot burn blu-ray DVDs.  I was able to burn 3 blu-ray DVDs using PE12.  When I select DVD from the menu it recogniazes that it is not a stadard DVD as I get an 'incorrect media' error message.  It will burn standard DVDs of the same video using standard DVD mefia.
    What is going  on here?
    When I loaded PE 12 back on the computer I cannot load a file created with PE13.  Looks like a format change?  Can I convert file back to PE12?

    Juergen
    Terrible news. Sorry about that.
    The following is an excerpt from my Premiere Elements 13 blog post, the section on Publish+Share/Disc
    The ISO Image choice is only in Premiere Elements 13.
    DISC. Major Changes Include Burn to offering ISO Image for DVD, Blu-ray, and AVCHD plus 2 new 1080p @ 23.976 presets for Blu-ray.
    The major categories of Publish+Share/Disc/ are DVD, Blu-ray, and Blu-ray. DVD and AVCHD offer burn to disc, folder, and new ISO image. Blu-ray offers burn to disc and new ISO image.Like 12, the new version's DVD, Blu-ray, and AVCHD presets do not have an Advanced Button under which to customize the preset and do not have a "Share Work Area Bar Only" option for selective sharing of the Timeline content Sketch of DVD, Blu-ray, AVCHD includes
    DVD (new features)
    Burn to:
    Disc
    ISO Image (4.7 GB) NEW
    ISO Image (8.5 GB) NEW
    Folder (4.7 GB)
    Folder (8.5 GB)
    Presets
    NTSC_Dolby DVD
    NTSC_Widescreen_Dolby DVD
    PAL_Dolby DVD
    PAL_Widescreen_DVD
    As before in 12, frame rate is 29.97 interlaced frames per second NTSC and 25 interlaced frames per second PAL.
    AVCHD (no changes)
    Burn to:
    Disc
    Folder (4.7 GB)
    Folder (8.5 GB)
    Presets
    H.264 1440 x 1080i NTSC Dolby
    H.264 1440 x 1080i PAL Dolby
    H.264 1440 x 1080p NTSC Dolby
    H.264 1920 x 1080i NTSC Dolby
    H.264 1920 x 1080i PAL Dolby
    H.264 1920 x 1080p NTSC Dolby
    Except for the two 1080p presets with frame rate of 23.976 progressive frames per second, the other presets all have a frame rate of 29.97 interlaced frames per second NTSC or 25 interlaced frames per second.
    Blu-ray (new features)
    Burn to:
    Disc
    ISO Image (25 GB) NEW
    ISO Image (50 GB) NEW
    Presets
    H.264 1440 x 1080i NTSC Dolby
    H.264 1440 x 1080i PAL Dolby
    H.264 1440 x 1080p NTSC Dolby NEW
    H.264 1920 x 1080i NTSC Dolby
    H.264 1920 x 1080i PAL Dolby
    H.264 1920 x 1080p NTSC Dolby NEW
    Except for the two 1080p presets with frame rate of 23.976 progressive frames per second, the other presets all have a frame rate of 29.97 interlaced frames per second NTSC or 25 interlaced frames per second.
    Look to Burn To: in the Burn Dialog,  and scroll down there to the option that you want.
    Please let me know if this ISO Image choice is going to work for you. But I will keeping searching for the answer to these no media present situations.
    ATR

  • My Premiere Elements 11 will not longer burn regular DVDs, but will burn Bue Ray

    I have reinstalled the program and still get the same erro messages when I try to burn a regular DVD.  Any ideas on how to fix this?  ( I have been burning regular DVDs for the last 4 months and have burned al leasr 15.

    ATR,
    I removed the stop marker and the DVD burned the way it should.  I really appreciate the quick response.  (I am still a bit confused why the stop marker  did not cause a problem when I successfully burned a Blue Ray disc) 
    Thank you,
    MrSpiffo

  • My book will not recognize my wireless. How can I get it to hook up to my wireless? It works on wireless evrywhere except my apartment.My room mate has the wieless working on her (non-mac) computer. It will not work opn mine.

    We have Comcast internet at my apartment. We have a wireless router. My room mates PC works on the wireless. My Mac book pro does not. However, My Mac book Pro DOES work anywhere else I take it. (Library, coffe house etc.) The tech from Comcast stated I need to have Apple take a look at it as it doesn't recognize the ip address. Thoughts?......

    I have went thru the exact same problems trying to upgrade the wireless card in my DV7.  It is very frustrating that the wireless card can't be upgrade to one that supports 5Ghz.  Here is my post from the network forum. http://h30434.www3.hp.com/t5/Wireless-Internet-Home/Unsupported-Wireless-LAN-6230/td-p/1419595 Doesn't sound like it is possible to upgrade to the Centrino 6230 without it being added the the "white list".  Sound like HP doesn't update the list after shipping the notebook. I feel your pain. HP needs to help out the consumer in upgrading the wireless cards.  I see we are not the only ones that have had this problem. 

Maybe you are looking for

  • Need help with automatic slideshow

    I made an automatic slideshow that switches frames at a set interval but now i want to load each frame from an extrenal swf and add a preloader for each frame, how do i tell the slideshow to wait until the frame is loaded before it proceeds to the ne

  • Hello I have an iBook G4 with a disk issue! Help

    Hello I have an iBook G4 and my disk/CD drive has disappeared. I also have a disk stuck in it. it spins on start up but nothing, I've tried all the reset and hold options and no luck. is there a driver i could install to find it or do i need to repla

  • Unable to extend table ONT.MLOG$_OE_ORDER_LINES_ALL

    Can someone help me on this one? I had the below error, and most of the references I've looked up suggests that I drop and recreate the table... Are there any impacts if I drop the log? thanks ORA-12096: error in materialized view log on "ONT"."OE_OR

  • Configuring Nexus 5k for SAN switching between UCS 6100s and NetApp storage

    We are trying to get our UCS environment setup to do SAN boot to LUNs on our NetApp storage. We have a pair of Nexus 5Ks with the Enterprise / SAN license on them and the 6-port FC module installed. What needs to be done to configure the Nexus 5000 t

  • Default speaker volume

    I know this is quite weird question... but what is the default value of the internal speaker volume? I have reset nvram but it didn't fix internal speaker volume of the "Mac OS", not a startup chime(I could fix speaker volume of startup chime by rese