W500 not passing the Multicore Test
I run the Lenovo ThinkVantage Toolbox diagnostics test, and it rise a warning in the Multicore test for the processor
Then I run the specific for the processor, all test passed except the last one, multicore test,
as solution it gives:
Turn off the system
Detach the power cord and wait for one minute
Re-attach the power cord and re-boot the system
Re-run the test
I did, and the test give the same results, should I turn-off-unplug-wait-re-run over and over?
Is it something wrong with the processor?
Or any driver?
Found 2 threads on it with some possible solutions:-
http://forums.lenovo.com/t5/ThinkVantage-Technologies/Multicore-test-with-Levono-Toolbox/m-p/217223
http://forums.lenovo.com/t5/X-Series-ThinkPad-Laptops/Multicore-Test-quot-wrong-configured-quot/m-p/...
Do make sure that you've the latest version of Toolbox:- http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=LENV-DIAGS#ltb
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel
Similar Messages
-
Windows media player extension is installed but does not pass the plugin test...what do I do now?
I followed the instructions to install the Microsoft Media Player Extension in order to be able to listen to the radio in the Youtube Toolbar. I checked to make sure it was installed as per the instructions, then I tried the test that is provided in this link: http://plugindoc.mozdev.org/testpages/wmp11.html, but the screen was just black, and the radio still doesn't work...what should I do now?
OK...but I still can't get the radio to work...I get an error message that says:
"None of the Radio Player's stations or podcasts work.
If none of the stations or podcasts work, then check whether your computer meets all the requirements below:
- Operating system: Microsoft Windows 2000/XP/Vista or Mac OS.
- Windows requirements:
- JavaScript is enabled in your browser .
- Cookies are enabled in your browser .
- Windows Media Player version 9 or higher is installed
- If you have an older Firefox toolbar version, you may need to install Media Player ActiveX .
If you have met all the requirements above and the Radio Player still doesn’t work, please contact our Support Center . ''
I've done all of the above, all requirements are met, and it STILL doesn't work!! Now what please?
Last thing says "please contact our Support Center"...isn't this the support center...if not, please let me know who I should write to?
thanks,
Monica -
3rd gen iPod Nano will not sync with latest version of iTunes on new laptop. It passes the connectivity test but not the sync test under diagnostics. Worked fine on old Windows 7 laptop but not new one. From Control Panel it shows up as an Apple iPod USB Device...
Never mind, I think. I think I figured it out. There was 1 song (out of > 900!) that somehow had been purchased with the other ID - I have no idea how. Once I deleted that song, it stopped asking.
There may be something with the newest iTunes version too. I didn't think in older versions that the "On this iPod" list of songs was greyed out. But at least it syncs ok. -
FX 5200 TDR128 driver not pass the windows XP logo testing
Hi there,
I've just bought an FX 5200 TDR128 VGA Cards, the problem is I cant install the driver because the driver is not pass the windows XP logo test (the error massage box says yhat the device driver is not designed with windows XP logo. So what can I do now? My VGA wont work properly if I do not install the driver which designed for microsoft windows XP logo.
Best regardsA MS signed (WHQL - Windows Hardware Quality Labs) driver is not a requirement - MS may make a big deal about it, but do you really think that MS has the time to test each and every driver (and their many revisions) that are made by all the hardware manufacturers in existence??!
Fact is, by the time MS finally 'certifies' a driver, odds are the manufacturer has built a newer and better one (especially in the case of graphic card drivers). Odds are, MS only really tests certain driver revisions as submitted to them by the author. (and, if you happen to install older hardware, the last driver available for that hardware may very well not be signed - what would you do then?!)
That said, you can ignore the warning message that Windows gives you about a driver not being signed. In fact, you can disable the driver check altogether in - Control Panel -> System -> Hardware tab in Device Manager section click the 'Driver Signing' button and set to 'ignore.'
Finally, after all that, the current nVidia driver (v.56.64) is WHQL signed - browse to it here or go directly (Win XP/2K) here. -
When deploying Endpoint Protection with SCCM 2012, some workstations are getting a popup saying:
The software you are installing for this hardware has not passed Windows Logo
testing and it references "Antivirus". Upon clicking continue anyway it finished installing.
I'm not able to duplicate it on command and not sure why it's happening. Anyone else see this or have ideas on how to troubleshoot?Without a real screenshot (and maybe even being there), it's hard to say. IME this is not normal behavior and my first thought is that this is actually some malware causing this.
Jason | http://blog.configmgrftw.com
Sorry it took a while, was waiting for it to happen again. Here is an actual screen shot. I'm leaving it until I hear back from you guys. This client actually shows that the endpoint protection deployment state failed with this message:
Description: 0x8004FF03.
InstallUpgradeOrUpdateInProgress=4.1.509.0 -
I copied a workbook that has a working scheduled refresh
modified the data model, added some new reports
added a new source (PQ from azure market place)
uploaded workbook to new powerbi location.
get the following error when i try to turn on scheduled refresh - this is even if i just select one data source that is still identical to the original (working) workbook
Test connections settings validation failed: one or more connections did not pass the test
Technical Details ▼
Correlation ID: ddcab6b8-ff2c-4881-9d8e-eeabbd23dff2
Date and Time: 12/12/2014 06:13:06 AM (UTC)
what's the problem?
Jakub @ Adelaide, Australia BlogStill a problem and not just for me but other users going by the threads on here...
https://social.technet.microsoft.com/Forums/en-US/eb8682f4-9b40-456a-a7f1-45627a0f4ff0/cannot-schedule-refresh?forum=powerbiforoffice365#eb8682f4-9b40-456a-a7f1-45627a0f4ff0
Applies to all worksheets that utilise a PQ connection registered in the gateway. (my gateway is on an azure VM)
Existing worksheets receive this warning. New workbooks that utilise these connections also receive this warning
Adding a new PQ to the gateway and a new workbook that uses the new connection also receives this warning.
Every PQ connection I have receives this warning. My PQ connections are all to web resources. Most are to the workflowmax.com API, and one is to the Azure Marketplace to retrieve data for a date dimension.
Note: this does not prevent me from scheduling or triggering a refresh, and the refresh itself completes successfully. It's just a weird warning that caused confusion as it sounds like the actual refresh will fail as well seeing as the connection test failed.
Jakub @ Adelaide, Australia Blog -
Was diagnosed and this is what he wrote at the end - is protected by a link to itunes Storedid not pass the test.before everything was working, firewall settings have not changed ... but in the itunes Store does not go
If the phone is offline there is no way to track it or send a message to it. You can place it in lost mode to lock it and send it a message (see http://help.apple.com/icloud/#/mmfc0f0165), but this will not take place until the phone goes back online, if it ever does. If it does, you will get an email informing you.
You might want to read this: http://support.apple.com/kb/HT5668. -
Adobe Acrobat 9 Pro Printer Drivers does not pass windows logo testing.
Issue:
I'am using the Acrobat Wizard tool to customize Adobe Acrobat 9 Pro to run create Adobe installed to run siliently within our network but I recieve the following hardware prompt to complete the install.
During the install of the Adobe Acrobat 9 Pro I recieve a Hardware Installation prompt:
The software you are installing for this hardware:
Printer
Has not passed Windows Logo testing to verfiy its compatibility with Windows XP.
Continue your installation of this software may impair or destabilize the correct operation of your system either immediately or in the future. Microsoft strongly recommends that you stop this installation now and contact the hardware vendor for software that has passed Windows Logo testing.
Is there any way I can download the drivers before I run the installation or is there a patch for Adobe Acrobat Pro 9.
Thanks
John TWhen I start itunes i get the message "Itunes was not properly installed if you wish to burn Cds you will need to reinstall itunes" Any ideas what i should do anyone?
That sounds like the GEAR drivers that iTunes uses for burning and importing aren't going in properly. (or there's damaged GEAR drivers for an old install stuck on the PC.
Perhaps manually uninstalling and reinstalling the GEAR drivers can get you past this. There's instructions for that on the GEAR wiki:
[DRIVERS: Windows - Updating, removing, 64 bit versions, etc|http://www.gearsoftware.com/wiki/index.php?title=DRIVERS:Windows_-_Updating%2C_removing%2C_64_bit_versions%2Cetc] -
Acrobat Pro 9 has not passed Windows Logo testing??
Bought download of Acrobat Pro 9 today. Installation on Windows XP Pro seemed to proceed well. The a pop-up window said The sortware you are installing for this hardware Printers has not passed Windows Logo testing to verify its compatability with Windows XP. then a link to "why this is important" and further warning "Continuing your installation of this software may impari ro destabilize the correct operation of your system either immediately or in the future. Microsoft strongly recommends that you stop this installation now and contact the hardware vendor for software that has passed Windows Logo testing."
Choices are Continue Anyway or STOP Installation
What does this mean? What do I do to get this upgrade installed and functioning correctly?try downloading and saving a fresh copy of the installer to your hard drive. (run the install from there rather than online.) switch off antispyware and antivirus applications prior to the install.
iTunes 7.0.2.16 Installer
if you get the message again with the fresh installer, perhaps try checking through the following Microsoft Knowledge Base document:
(MS) You cannot install some updates or programs -
Itunes does not pass windows logo testing to verify CD/DVDrom drives, Why?
Hello All,
When I try to install Itunes 9.2 on my XP 32bit machine, I get the error message "Itunes does not pass windows logo testing to verify CD/DVD rom drives this software will not be installed. Contact your administrator" I am the owner & my account has administrator rights. When I start itunes i get the message "Itunes was not properly installed if you wish to burn Cds you will need to reinstall itunes" Any ideas what i should do anyone?
Thanks
LacanoxWhen I start itunes i get the message "Itunes was not properly installed if you wish to burn Cds you will need to reinstall itunes" Any ideas what i should do anyone?
That sounds like the GEAR drivers that iTunes uses for burning and importing aren't going in properly. (or there's damaged GEAR drivers for an old install stuck on the PC.
Perhaps manually uninstalling and reinstalling the GEAR drivers can get you past this. There's instructions for that on the GEAR wiki:
[DRIVERS: Windows - Updating, removing, 64 bit versions, etc|http://www.gearsoftware.com/wiki/index.php?title=DRIVERS:Windows_-_Updating%2C_removing%2C_64_bit_versions%2Cetc] -
Software CD has not passed Windows Logo testing???
This is what it showed when I was installing the softwares from the CD which came with my N73 music edition... "...has not passed Windows Logo testing"
I still clicked on "continue anyway" tab and went ahead... But now the data cable doesn't connect to the softwares. For transferring music, I clicked on media player option and it said messaging is using my memory card, so first change settings in messaging. On clicking Nokia PC suite option, it keeps on detecting the device but nothing happens...
My PC has Windows XP only, the CD's cover shows its compatibility with XP... what can be the problem then??you can generally ignore the error message if you are using trusted software ie from nokia etc as it just means your operating system is unable to verify its authentisity (sp) but for transfering data your better to select data transfer when connecting the usb and then dragging and dropping the files into the handset.
go to my computer then open the icon called removable disk, there will be a folder called music or something similar -this is your phones mass memory, drop the songs into here.
hope this helps -
"Not passed Windows logo testing" message
I just download iTunes 8 and partway through the install got a message that said "software has not passed Windows Logo Testing" and that this could compromise my system.
The older version of iTunes worked just fine, is there anywhere I can download the older version?Just to establish a good base line I am going to have you uninstall and reinstall the printer from our website rather than the CD-ROM that came with the machine.
First if you use a USB cord, make sure to remove it. Do not plug it back in until the software directs you to. Then go through the Devices and Printers, Programs and Features and Device Manager folders and insure that all copies, files, and programs related to the printer are removed. Then as directed, restart the computer.
In the START menu type "%temp%" and press ENTER. Here I want you to press Ctrl+A and hit DELETE. Some of the files will not allow you to delete them, skip those files and delete the majority that allows it.
Then follow this link to download the full feature software and drivers for the printer:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lc=en&product=5061073&
Install that using the USB >> Wireless setup wizard and establish a static IP (video below on that) :
Assigning a Static IP Address to Your Wireless HP Printer - Windows 7 - YouTube
Have a great day! -
Adobe Photoshop CS5 did not pass the security scan on my windows machine.
All products are up-to-date but the photoshop did not pass the test. Does Adobe still support the CS5 products?
No, Adobe no longer officially supports any of the CS5 products.
However, we are not aware of any reports of any anti-virus / anti-malware software rejecting any Adobe products.
Exactly which such software is doing that? You may have very outdated or crufty virus / malware definitions. Try to get updates for them.
- Dov -
Itunes 7.6 update not passing windows logo testing for compatibility
I have tried to update itunes 3 times. It downloads fine but when it gets to the installation part, I get a warning from windows saying that this software has not passed the windows logo test for compatibility and that if I proceed with the installaton, The system may get impaired. So I stop installation, but eventually I have to update itunes. My ipod gets updated but itunes is not. Lately I've been having problems with my ipod acting buggy. Is this familiar to anyone? Why is this happening and what do I need to do? Thanks!
With that particular message, it might be worth checking through the techniques from the following Microsoft document:
(MS) You cannot install some updates or programs -
"Software has not passed Windows logo testing"
My sister just bought a new 30G Ipod. During the installation a window popped up saying
"The software you are installing has not passed Windows Logo testing to verify its compatibility with Windows XP"
However my dad also has a 30GB Ipod that he's had for a few months now and its working just fine. So I guess my question is
(1)Is there a difference in the systems or something that the new one isn't compatible?
(2)Is there anyway to perhaps have it tested somehow by the computer or some other solution to get past this?
(I myself don't know much about Ipods or Apple products so I apologize if this is a doofy question!)
Compaq 9500 Windows XPtry downloading and saving a fresh copy of the installer to your hard drive. (run the install from there rather than online.) switch off antispyware and antivirus applications prior to the install.
iTunes 7.0.2.16 Installer
if you get the message again with the fresh installer, perhaps try checking through the following Microsoft Knowledge Base document:
(MS) You cannot install some updates or programs
Maybe you are looking for
-
Java Printing API - Unable to print on HP LaserJet
Hi, I'm trying to use Java's printing API to print a PDF file onto a network/local printer. My code works fine when I try printing onto Canon printers but the behavior is erratic on HP LaserJet printers. I've tried using two different models of HP La
-
Info required about Secondary IP
Hi Seniors, I need some info about secondary ip....like....in which circumstances is it being used. I am not looking for the config method...but some theory behind the evolution of sec.ip
-
How to add comment in xml output. I have to replace the default comment in the xml output. If i use SRW.ADD_DEFINITION, Its not working. Can any on guide me through this to achieve it.
-
Visual indicators at beginning/end of clip or sequence?
In cs6 is there any sort of visual indicator to let you know that you are at the beginning/end of a clip or sequence? Anyone familiar with FCP, I'm look for something equivalent to the L shape or blue line that appeared at the beginning and ending of
-
I am unable to register, I want to talk to the helpline, but I am currently in China, I will pay, I don't care what it costs, how can I do this?