W500 switchable graphics

I have a W500 running Windows 7 x64 SP1.
I had some issues with the ATI drivers, and am currently running with the latst switchable graphics installed, overlaid by the current catalyst 11.3 drivers. Switching still works fine :-)
Of course the intel drivers in this combo remain quite out of date - has anyone figured out how to update them?

Can you explain how you installed the latest ATI Catalyst drivers without disabling the switchable graphics functions? Also, the Lenovo Power Manager seems to be rather closely integrated into the switchable graphics functions--at least the menu functions UI for it--so how does that work with the ATI drivers?
Finally, what about stability? Any graphics or system crashes?
I use Windows 7 x64 SP1 too, and I'd be grateful to know.

Similar Messages

  • W7/64-bit on W500 - Switchable Graphics problem

    Hi,
    Did a clean install Windows 7 Ultimate (64-bit) on my Thinkpad W500 (4062-3CG).
    Having problem with "ThinkPad Switchable Graphics Driver for Windows 7".
    ATI driver won't load, so default Intel chipset is used with poor graphics as a result.
    I have also tried "Windows 7 BETA Drivers and Utilities" with no luck.
    Yesterday the graphics worked for a short period of time, that was after remoting my Thinkpad with RDP? very strange. But after reboot graphics was back to non functional again.
    Any ideas?
    TIA
    Johan

    Did you apply Lenovo driver packages in any specific order? Don't really understand what I missed?
    My plan was to do a "clean" W7/64 install and after that run ThinkVantage System Update 4.0 for latest drivers.
    In my case ThinkVantage System Update 4.0 could not start without Access Help for Windows 7 installed, that was the first dependency problem.
    However, after that ThinkVantage System Update 4.0 run successfully and everything works fine but the ThinkPad Switchable Graphics Driver for Windows 7.
    The ThinkVantage System Update 4.0 applied latest updates for everything including the BIOS. When I try to run BIOS update separately for getting around the graphics problem it says BIOS version is OK and no update needed.
    Tried to disable Switchable Graphics in BIOS-setup using Discrete but that does not fix my problem?

  • Bug on t400's fn+brightness? (after install switchable graphics)

    it is great that we can use switchable graphics on windows 7 now, thanks.
    well, i found a bug (not only my t400, but also several of my friends'), the FN+brightness problem.
    1. AMD graphics
    2. switch to INTEL graphics (fn+brightness function is just OK)
    3. switch back to AMD graphics (fn+brightness is down,,,,) (fn+f5 f8 etc. are OK) (fn+pgup (light) is also OK)
    A. log off --> log in  (no use)
    B1. restart (fine again)
    B2. reinstall the hotkey features driver (include restart,,, ) (of course fine again)
    C. switch to intel, switch back to amd, down again,,,,,,
    is it a universal bug or there is something wrong with my system functions( settings, drivers etc.)
    thanks a lot

    Another possible work around:  after resuming from sleep, toggle to discrete graphics and back to integrated.  See if that sorts it until the next sleep - and let us know, please.
    As to a fix, this thread is a year old, so don't hold you breath:  R400/T400/T500/W500: Switchable graphics issues with Win 7
    Z (also suffering w/the above...)
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • W500 with ATI Mobility FireGL V5700 -can't change switchable graphics to "High Performanc​e"

    My W500 crashed on me this morning while playing a game, and I ran into a couple blue screens of death.After doing some troubleshooting, I determined that I had an issue with my video card, more specifically that my machine no longer recognizes my ATI Mobility FGL V5700, and only the low quality Intel chipset.
    I tried uninstalling and reinstalling the ATI Catalyst drivers, but that did not work.
    I also tried changing the switchable graphics back to "High Performance", but when I do, the screen goes completely black. If I put my computer to sleep and then wake it back up, the switchable graphics automatically go back to "Energy Saving", and my display works again, of course with the Intel graphics only.
    If reinstalling the drivers doesn't work, and I can't change the graphics back to High Performance mode, does that mean my video card is shot? Any suggestions other than buy a new one or live with the Intel graphics?
    I'd try to contact support but unfortunately my warranty just expired a month ago. Seems like everything breaks within a couple months of the warranty expiring. Grrr.

    I'm having identical issues. After updating the driver through lenovo update utility, i can no longer get the graphic card driver working. I've tried several different drivers, none of them work, and I'm now stuck here with a useless computer while my deadlines come closer and closer. Are there seriously no offical reply to any of these threads?

  • Will there ever be an updated Switchable Graphics driver for W500 (Vista)?

    Well the current driver is quite old and I failed in modding the current Switchable Graphics driver to include new drivers.
    So, will there ever be an update for Switchable Graphics in Vista for the W500?

    I don't think there will be for Vista; it doesn't support heterogeneous adapters, and the Vista package uses an AMD proprietary driver wrapper which I doubt will see further update.
    For us on Windows 7, we're able to apply the latest Catalyst drivers with good results. (11.4 is FAST.)
    W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
    X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
    Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

  • W500: using the switchable graphics with vista ultimate without the power manager software?

    seriously, invest in a new hitachi travelstar 320gb for 49 bucks from that tiger place online and a usb hard drive caddy, pop in your free clonezilla cd and your rescue and recovery problems will be over!
    after reading all the problems with that software i figured my data was too valuble to get caught in that mess so for under 75 bucks problem solved and i rid my w500 of that bloatware. even cheaper then ordering the recovery disks from lenovo.
    working on getting rid of the rest of the useless software now.
    hey question, how do you use the switchable graphics on the w500 with vista ultimate without the power manager software? if you can thats next!!
    Moderator note: Question added to subject line for clarity.
    Message Edited by Agotthelf on 28-04-2009 08:45 AM

    That's because you are asking a T500/W500 question in the Thinkvantage forum. Anyway, the answer to your question is in this thread.
    ATI recently started packaging their switchable graphics driver together with their regular Catalyst. So downloading their latest driver Catalyst 9.4 from the ATI/AMD site and then modifying it with the Mobility Modder will allow you to use switchable graphics without the power manager. The little problem is just that the released version of the Mobility Modder stopped working with Catalyst 9.2 and you are on your own getting a modified Modder  working on 9.4, see here.
    So I decided not to make more work for myself staying on a modded Catalyst 9.1 and for the time being living without switchable graphics.
    T500: Vista 32, 2.8GHz, 4GB RAM, 15.4" 1680x1050, 500GB 7200rpm, ATI Radeon HD3650 + Intel 4500MHD. T42: XP, 1.7GHz, 2GB RAM, 14.1" 1024x768, 250GB PATA, ATI Radeon 7500.

  • Serious W7 Bug - ALL ATi Drivers for Thinkpads /w Switchable Graphics Technology bricks OS.

    Alas, i have found one serious bug for my Thinkpad.
    It comes with Switchable Graphics Card Technology, with an Intel GMA 4500MHD and ATi Mobility Radeon 3470 paired together.
    I have initially installed Pre-RTM 7260(ok, i know it's leaked), and faced the problem for the first time after installing the ATi drivers from either Windows Update OR ATi's website. However i have downgraded back to Release Candidate as there was stability issues with EXPLORER.exe
    Anyway, surprising what i've though to be a show-stopper bug was also present in RC 7100. After installing(or rather, midway through) the driver installation, the screen blinks for a moment and after that, Explorer.exe is nowhere to be found with only wallpaper. OS seems to be bricked as restart does nothing. Only a System Restore prior to installation would solve the issue.
    After diagnosing the problem, i have found the issue to be with the Switchable Graphics Card system. In BIOS, it was set to Swithable Graphics, with OS Detection set to Enabled, Thinkpad LCD Display(for output). I tried to set the graphics to either Discrete(ATi) or Integrated(Intel) but when i booted the system up it was in SVGA resolution and DXDIAG stating no graphics found. When it was in Discrete, i tried to install the ATi drivers once again, and although installation was successful, after restarting the same thing happened.
    To be fair, i have repeated the drivers installation EXACTLY the same for both Windows 7 Builds(7100 RC and 7260 Pre-RTM) and the same problem occured. I have also tried to install the ATi drivers before the Intel Chipset(and basically the rest) and it's the same nevertheless.
    I believe that this is a serious issue with Switchable Graphics Technology for Windows 7 Beta, since we have to make do with the generic Microsoft display adapter alone. I hope Lenovo engineers can put priority a solution for this as soon as possible.
     http://img269.imageshack.us/my.php?image=47492934.png
    This is Dxdiag after i set other options than Switchable Graphics
     http://img30.imageshack.us/my.php?image=error3yyt.png
    http://img41.imageshack.us/my.php?image=error2k.png
    This is my updates.
    PS: The Ati card is showing a triangle icon in Device Manager too, but i guess updating it brings the same bricking result.
    Error msg "This device cannot start. (Code 10)"
    Message Edited by ceecookie on 06-22-2009 07:07 AM
    Message Edited by ceecookie on 06-22-2009 07:08 AM
    Message Edited by ceecookie on 06-22-2009 07:41 AM

    Sorry to hear you are having difficulties.
    When I installed RC1 (build 7100), it came with a built-in driver that worked just fine for the discrete graphics in my W500.
    A few weeks later, I installed the current release Vista driver for integrated graphics (this one) and it is working just fine as well.  Installing the Lenovo driver gave me the ATI control panel (not sure what use that is), otherwise, it didn't affect performance either way.
    I have switchable graphics turned off in the BIOS, OS detection turned off, and have the machine set to use the discrete graphics only.  I think it would be a bit much to expect either Microsoft or Lenovo to support the switchable graphics this early in the development of Windows 7.  Besides, the discrete graphics doesn't eat up the battery that much - I still get 3 hours of battery life, which is sufficient for my needs.
    Maybe try turning switchable graphics and switchable graphics detection off in your BIOS, that might get you running again.
    Michael
    W520 (4270 CTO), which replaced a W500 (4062-27U), which replaced a T42P, which replaced an A21P...

  • W500 switching graphics card

    Hi, so on my w500 laptop specs, it says that it has 512 MB ATI Mobility FireGL V5700 graphics card that is switchable to Intel Graphics Media Accelerator 4500 MHD. I want to switch to the Intel Graphics Media Accelerator but I can't seem to figure out how to do it- I was told it was easy, but I'm not having much luck. If anyone could help me, that would be awesome, thanks!
    Solved!
    Go to Solution.

    Hi and welcome to the forum!
    Which OS are you using? The switchable feature only works in Win Vista and 7.
    Maybe this will help:-
    "How do I tell the system to switch my graphics adapter?
    To switch graphics adapters, left-click on the ThinkVantage Power Managerbattery icon in the system notification area. At the bottom of the pop-up menu there will be a Switchable Graphics sub-menu.
    Note: Changing ThinkVantage Power Manager from Basic mode (default) to Advanced mode will cause the menu to look different. The menu will no longer be transparent and the slider is replaced with a list of schemes. The Switchable Graphics sub-menu is still at the bottom."
    See the support page:- http://www-307.ibm.com/pc/support/site.wss/MIGR-70495.html
    Let us know if this answers your question.
    Maliha (I don't work for lenovo)
    ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
    IdeaPad: U350
    Apple:- Macbook Air [Snow Leopard]
    Did someone help you today? Compliment them with a Kudos!
    Was your question answered today? Mark it as an Accepted Solution! 
      Lenovo Deutsche Community     Lenovo Comunidad en Español 
    Visit my YouTube Channel

  • Power Manager 3.48 no longer has switchable graphics option

    I ran Active Update yesterday and the Power Manager is now upgraded to version 3.48.  It appears that there is no longer an option to switch between high performance and energy saving graphics.  How is the graphics mode supposed to be switched now that this menu option has been removed from the right mouse button menu on the Power manager?  Do I need to downgrade to a previous version?
    In case it matters, I'm running a W500 with Windows 7 Professional 64-bit.
    Thanks,
    Danny

    @ersiles,
    I have the T400 with switchable, I just updated it to PM 3.64 and it does swtich. What I notice earlier when I wasn't able to switch the graphic was due to BIOS settings.
    Check BIOS settings if you have it on switchable graphic mode and check if BIOS detect is enabled.
    Once that is done, boot into Windows, uninstall all the video drivers, reboot. then install the drivers again.
    Windows would try to install their version of the driver, click "Reboot later" when Windows prompt a reboot. Reboot only when ATi manager prompt the reboot.
    I was having issue too on the T400 not being able to switch. It definitely helped me ..
    Let me know.
    //JameZ
    Check out the Community Knowledge Base for hints and tips.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    X240 | 8GB RAM | 512GB Samsung SSD

  • T500: Switchable graphics on Windows 7 RC 32-bit?

    Hi, I've got a new T500 2055-CTO with switchable graphics. Has anyone gotten this to work? Whenever I try to switch to ATI nothing happens (the mouse cursor goes into busy state for a few seconds the first time I try after a reboot).
    Besides, my screen image gets corrupted periodically while working using the integrated Intel graphics, I can fix it by rearranging windows etc but quite annoying.
    Also, my mouse when controlled by the trackpoint/pad will freeze up every now and then but keyboard will still work when this happens. No issues with an external USB mouse attached.
    I've tried the official switchable Vista 32-bit driver and also a beta one listed here: http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-71851
    But none of them solve the problem.
    Any ideas or input would be appreciated.
    Thanks,
    Hans

    Hello Hans:
    I have a W500, which I think is somewhat similar to a T500 - it also has switchable graphics.
    Long, long ago (back when I was using Vista before SP2), I went into the BIOS and turned off the switchable graphics feature - I told the computer to use the discrete graphics all the time, and to totally ignore the integrated graphics.
    Since then, my life has been a lot simpler, the computer has been trouble-free (both on Vista SP1, Vista SP2, and W7 build 7100), and battery life has been more than sufficient for my needs (about 3 hours total, with everything set to 'high performance').
    I think that the 'switchable graphics' feature is one of these things that sounds good conceptually, but is too much of a PITA in reality.  I applaud Lenovo for trying it out - but, unless you really, really need it (meaning, you suffer from electricity shortages on a regular basis), it is more trouble than it is worth.  Just turn it off, forget about it, and start enjoying life. 
    Michael
    W520 (4270 CTO), which replaced a W500 (4062-27U), which replaced a T42P, which replaced an A21P...

  • Windows 7 RTM x64 Power Manager and switchable graphics not working

    Installed Windows 7 RTM x64 on my T400. After windows update and installing Lenovo's drivers, everything is accounted for. ATI graphics works fine, and I can see the Intel graphics on the shortcut menu. I just cannot manually switch to the built-in graphics, nor did I see the Power Manager. What do I need to do? I have installed the drivers for the power management, even though on the list of driver on lenovo's webpage it says it's only for SL models.
    Help would be appreciated.
    Specs:
    T400
    LED
    ATI/Intel switchable graphics
    4Gb

    Have you installed the Power manager http://www-307.ibm.com/pc/support/site.wss/WIN7-BE​TA.html#powm ?
    And after that, make sure you have installed the right driver (the one for switchable graphics): http://www-307.ibm.com/pc/support/site.wss/WIN7-BE​TA.html#m8xswitch
    Hope that helps.
    I also have Windows 7 Professional x64 on my T400 and everything works fine (i only uses programs and driver from here: http://www-307.ibm.com/pc/support/site.wss/WIN7-BE​TA.html
    T400 2767-AG8
    Windows 7 Professional 64bit

  • AMD 5650/Intel switchable graphics setup configuration woes

    I was wondering if someone could help me with my POS HP DV7-4100 ATI Radeon 5650/Intel switchable graphics setup.  I'm so annoyed with this and don't know how to proceed but it looks like I'm not completing the configuration properly.
    I have tried seemingly everything so far: 
    Catalyst w/ Catalyst-utils
    Catalyst-hook
    Catalyst w & w/out utils-pxp
    Catalyst-total-pxp
    Anyway, loading catalyst without xorg.conf seems to get me the closest to a working setup but once I log into Cinnamon, I get a message saying that it has loaded in fallback mode and if I would like to try to restart cinnamon (nothing happens).
    This leads me to believe that this is a config issue.
    This is the dmesg without an xorg.conf file.
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.12.6-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.2 (GCC) ) #1 SMP PREEMPT Fri Dec 20 19:39:00 CET 2013
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a303086c-e564-4347-92f1-8ec5ecbdcf85 ro quiet
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009b63efff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009b63f000-0x000000009b6befff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000009b6bf000-0x000000009b7befff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009b7bf000-0x000000009b7fefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x000000009b7ff000-0x000000009b7fffff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009b800000-0x000000009fffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1b000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ffe80000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001fbffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000001fc000000-0x00000001ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000200000000-0x000000025bffffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.6 present.
    [ 0.000000] DMI: Hewlett-Packard HP Pavilion dv7 Notebook PC/144B, BIOS F.29 11/07/2011
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x25c000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-EFFFF write-through
    [ 0.000000] F0000-FFFFF write-combining
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 base 0FFE00000 mask FFFE00000 write-protect
    [ 0.000000] 2 base 080000000 mask FE0000000 write-back
    [ 0.000000] 3 base 09C000000 mask FFC000000 uncachable
    [ 0.000000] 4 base 09B800000 mask FFF800000 uncachable
    [ 0.000000] 5 base 100000000 mask F00000000 write-back
    [ 0.000000] 6 base 200000000 mask F80000000 write-back
    [ 0.000000] 7 base 25C000000 mask FFC000000 uncachable
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: last_pfn = 0x9b800 max_arch_pfn = 0x400000000
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
    [ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
    [ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x25be00000-0x25bffffff]
    [ 0.000000] [mem 0x25be00000-0x25bffffff] page 2M
    [ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x258000000-0x25bdfffff]
    [ 0.000000] [mem 0x258000000-0x25bdfffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x200000000-0x257ffffff]
    [ 0.000000] [mem 0x200000000-0x257ffffff] page 2M
    [ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x9b63efff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x9b5fffff] page 2M
    [ 0.000000] [mem 0x9b600000-0x9b63efff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x9b7ff000-0x9b7fffff]
    [ 0.000000] [mem 0x9b7ff000-0x9b7fffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1fbffffff]
    [ 0.000000] [mem 0x100000000-0x1fbffffff] page 2M
    [ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
    [ 0.000000] RAMDISK: [mem 0x37a28000-0x37d0bfff]
    [ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HPQOEM)
    [ 0.000000] ACPI: XSDT 000000009b7fe120 0007C (v01 HPQOEM SLIC-MPC 00000001 01000013)
    [ 0.000000] ACPI: FACP 000000009b7fc000 000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: DSDT 000000009b7e9000 0F50F (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: FACS 000000009b75e000 00040
    [ 0.000000] ACPI: ASF! 000000009b7fd000 000A5 (v32 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: HPET 000000009b7fb000 00038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: APIC 000000009b7fa000 0008C (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: MCFG 000000009b7f9000 0003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: SLIC 000000009b7e8000 00176 (v01 HPQOEM SLIC-MPC 00000001 SLIC 000F4240)
    [ 0.000000] ACPI: BOOT 000000009b7e5000 00028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: ASPT 000000009b7e2000 00034 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: WDAT 000000009b7e1000 00224 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: SSDT 000000009b7e0000 009F1 (v01 PmRef CpuPm 00003000 INTL 20051117)
    [ 0.000000] ACPI: SSDT 000000009b7de000 01B34 (v01 AmdRef AmdTabl 00001000 INTL 20051117)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000025bffffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x25bffffff]
    [ 0.000000] NODE_DATA [mem 0x25bff5000-0x25bff9fff]
    [ 0.000000] [ffffea0000000000-ffffea00097fffff] PMD -> [ffff880253600000-ffff88025b5fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x25bffffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
    [ 0.000000] node 0: [mem 0x00100000-0x9b63efff]
    [ 0.000000] node 0: [mem 0x9b7ff000-0x9b7fffff]
    [ 0.000000] node 0: [mem 0x100000000-0x1fbffffff]
    [ 0.000000] node 0: [mem 0x200000000-0x25bffffff]
    [ 0.000000] On node 0 totalpages: 2045404
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3996 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 9881 pages used for memmap
    [ 0.000000] DMA32 zone: 632384 pages, LIFO batch:31
    [ 0.000000] Normal zone: 22272 pages used for memmap
    [ 0.000000] Normal zone: 1409024 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9b63f000-0x9b6befff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9b6bf000-0x9b7befff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9b7bf000-0x9b7fefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9b800000-0x9fffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xa0000000-0xefffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfeafffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1afff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1b000-0xfed1ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffe7ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xffe80000-0xffffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x1fc000000-0x1ffffffff]
    [ 0.000000] e820: [mem 0xa0000000-0xefffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88025bc00000 s86464 r8192 d24128 u262144
    [ 0.000000] pcpu-alloc: s86464 r8192 d24128 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2013166
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a303086c-e564-4347-92f1-8ec5ecbdcf85 ro quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 7968736K/8181616K available (5124K kernel code, 807K rwdata, 1628K rodata, 1144K init, 1288K bss, 212880K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
    [ 0.000000] NR_IRQS:8448 nr_irqs:744 16
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 33554432 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.003333] tsc: Detected 2527.100 MHz processor
    [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5056.79 BogoMIPS (lpj=8423666)
    [ 0.000006] pid_max: default: 32768 minimum: 301
    [ 0.000033] Security Framework initialized
    [ 0.000044] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000045] Yama: becoming mindful.
    [ 0.000537] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.002402] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.003219] Mount-cache hash table entries: 256
    [ 0.003418] Initializing cgroup subsys memory
    [ 0.003430] Initializing cgroup subsys devices
    [ 0.003432] Initializing cgroup subsys freezer
    [ 0.003434] Initializing cgroup subsys net_cls
    [ 0.003435] Initializing cgroup subsys blkio
    [ 0.003456] CPU: Physical Processor ID: 0
    [ 0.003457] CPU: Processor Core ID: 0
    [ 0.003463] mce: CPU supports 9 MCE banks
    [ 0.003473] CPU0: Thermal monitoring enabled (TM1)
    [ 0.003483] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
    Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
    tlb_flushall_shift: 6
    [ 0.003568] Freeing SMP alternatives memory: 20K (ffffffff819e9000 - ffffffff819ee000)
    [ 0.004537] ACPI: Core revision 20130725
    [ 0.013846] ACPI: All ACPI Tables successfully acquired
    [ 0.038849] ftrace: allocating 20318 entries in 80 pages
    [ 0.048808] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.081797] smpboot: CPU0: Intel(R) Core(TM) i5 CPU M 460 @ 2.53GHz (fam: 06, model: 25, stepping: 05)
    [ 0.187276] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
    [ 0.187283] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
    [ 0.187285] ... version: 3
    [ 0.187286] ... bit width: 48
    [ 0.187287] ... generic registers: 4
    [ 0.187288] ... value mask: 0000ffffffffffff
    [ 0.187288] ... max period: 000000007fffffff
    [ 0.187289] ... fixed-purpose events: 3
    [ 0.187290] ... event mask: 000000070000000f
    [ 0.660504] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.647139] smpboot: Booting Node 0, Processors # 1 # 2 # 3 OK
    [ 0.700394] Brought up 4 CPUs
    [ 0.700400] smpboot: Total of 4 processors activated (20224.16 BogoMIPS)
    [ 0.702976] devtmpfs: initialized
    [ 0.705408] PM: Registering ACPI NVS region [mem 0x9b6bf000-0x9b7befff] (1048576 bytes)
    [ 0.706249] RTC time: 18:58:44, date: 01/06/14
    [ 0.706292] NET: Registered protocol family 16
    [ 0.706388] cpuidle: using governor ladder
    [ 0.706389] cpuidle: using governor menu
    [ 0.706414] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.706416] ACPI: bus type PCI registered
    [ 0.706418] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.706482] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
    [ 0.706485] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
    [ 0.713484] PCI: Using configuration type 1 for base access
    [ 0.714057] bio: create slab <bio-0> at 0
    [ 0.714171] ACPI: Added _OSI(Module Device)
    [ 0.714172] ACPI: Added _OSI(Processor Device)
    [ 0.714174] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.714175] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.715777] ACPI: EC: Look up EC in DSDT
    [ 0.723731] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.729362] ACPI: SSDT 000000009b691918 00432 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    [ 0.729739] ACPI: Dynamic OEM Table Load:
    [ 0.729741] ACPI: SSDT (null) 00432 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    [ 0.729882] ACPI: SSDT 000000009b68f018 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.730243] ACPI: Dynamic OEM Table Load:
    [ 0.730245] ACPI: SSDT (null) 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.750624] ACPI: SSDT 000000009b690a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.751035] ACPI: Dynamic OEM Table Load:
    [ 0.751037] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.760515] ACPI: SSDT 000000009b68ed98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.760902] ACPI: Dynamic OEM Table Load:
    [ 0.760904] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.813748] ACPI: Interpreter enabled
    [ 0.813763] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
    [ 0.813769] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
    [ 0.813788] ACPI: (supports S0 S3 S4 S5)
    [ 0.813790] ACPI: Using IOAPIC for interrupt routing
    [ 0.813825] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.813932] ACPI: No dock devices found.
    [ 1.447844] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
    [ 1.447876] \_SB_.PCI0:_OSC invalid UUID
    [ 1.447877] _OSC request data:1 8 0
    [ 1.447907] \_SB_.PCI0:_OSC invalid UUID
    [ 1.447908] _OSC request data:1 1f 0
    [ 1.447911] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
    [ 1.447913] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
    [ 1.448565] ACPI: \_SB_.PCI0.ACEL: can't evaluate _ADR (0x5)
    [ 1.448567] ACPI: \_SB_.PCI0.PDRC: can't evaluate _ADR (0x5)
    [ 1.448573] PCI host bridge to bus 0000:00
    [ 1.448575] pci_bus 0000:00: root bus resource [bus 00-7e]
    [ 1.448577] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 1.448578] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 1.448580] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 1.448581] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xfeafffff]
    [ 1.448589] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
    [ 1.448606] DMAR: Disabling batched IOTLB flush on Ironlake
    [ 1.448669] pci 0000:00:01.0: [8086:0045] type 01 class 0x060400
    [ 1.448699] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 1.448735] pci 0000:00:01.0: System wakeup disabled by ACPI
    [ 1.448767] pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
    [ 1.448778] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc03fffff 64bit]
    [ 1.448783] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
    [ 1.448787] pci 0000:00:02.0: reg 0x20: [io 0x5050-0x5057]
    [ 1.448892] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
    [ 1.448920] pci 0000:00:16.0: reg 0x10: [mem 0xc4504000-0xc450400f 64bit]
    [ 1.449016] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 1.449101] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
    [ 1.449515] pci 0000:00:1a.0: reg 0x10: [mem 0xc450a000-0xc450a3ff]
    [ 1.451973] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 1.452031] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 1.452072] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
    [ 1.452093] pci 0000:00:1b.0: reg 0x10: [mem 0xc4500000-0xc4503fff 64bit]
    [ 1.452188] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 1.452234] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 1.452267] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
    [ 1.452365] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 1.452412] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 1.452444] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
    [ 1.452541] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 1.452588] pci 0000:00:1c.1: System wakeup disabled by ACPI
    [ 1.452634] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
    [ 1.453043] pci 0000:00:1d.0: reg 0x10: [mem 0xc4509000-0xc45093ff]
    [ 1.455490] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 1.455548] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 1.455583] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
    [ 1.455686] pci 0000:00:1e.0: System wakeup disabled by ACPI
    [ 1.455720] pci 0000:00:1f.0: [8086:3b09] type 00 class 0x060100
    [ 1.455888] pci 0000:00:1f.2: [8086:3b29] type 00 class 0x010601
    [ 1.455915] pci 0000:00:1f.2: reg 0x10: [io 0x5048-0x504f]
    [ 1.455926] pci 0000:00:1f.2: reg 0x14: [io 0x505c-0x505f]
    [ 1.455937] pci 0000:00:1f.2: reg 0x18: [io 0x5040-0x5047]
    [ 1.455947] pci 0000:00:1f.2: reg 0x1c: [io 0x5058-0x505b]
    [ 1.455958] pci 0000:00:1f.2: reg 0x20: [io 0x5020-0x503f]
    [ 1.455969] pci 0000:00:1f.2: reg 0x24: [mem 0xc4508000-0xc45087ff]
    [ 1.456035] pci 0000:00:1f.2: PME# supported from D3hot
    [ 1.456106] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
    [ 1.456126] pci 0000:00:1f.3: reg 0x10: [mem 0xc4506000-0xc45060ff 64bit]
    [ 1.456155] pci 0000:00:1f.3: reg 0x20: [io 0x5000-0x501f]
    [ 1.456246] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
    [ 1.456272] pci 0000:00:1f.6: reg 0x10: [mem 0xc4507000-0xc4507fff 64bit]
    [ 1.456465] pci 0000:01:00.0: [1002:68c1] type 00 class 0x030000
    [ 1.456479] pci 0000:01:00.0: reg 0x10: [mem 0xa0000000-0xafffffff 64bit pref]
    [ 1.456489] pci 0000:01:00.0: reg 0x18: [mem 0xc4400000-0xc441ffff 64bit]
    [ 1.456496] pci 0000:01:00.0: reg 0x20: [io 0x4000-0x40ff]
    [ 1.456507] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
    [ 1.456544] pci 0000:01:00.0: supports D1 D2
    [ 1.456587] pci 0000:01:00.1: [1002:aa60] type 00 class 0x040300
    [ 1.456603] pci 0000:01:00.1: reg 0x10: [mem 0xc4420000-0xc4423fff 64bit]
    [ 1.456673] pci 0000:01:00.1: supports D1 D2
    [ 1.456730] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 1.456732] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
    [ 1.456735] pci 0000:00:01.0: bridge window [mem 0xc4400000-0xc44fffff]
    [ 1.456738] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
    [ 1.456862] pci 0000:02:00.0: [8086:0084] type 00 class 0x028000
    [ 1.456921] pci 0000:02:00.0: reg 0x10: [mem 0xc3400000-0xc3401fff 64bit]
    [ 1.457132] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
    [ 1.466741] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 1.466749] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
    [ 1.466756] pci 0000:00:1c.0: bridge window [mem 0xc3400000-0xc43fffff]
    [ 1.466765] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
    [ 1.466869] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
    [ 1.466888] pci 0000:03:00.0: reg 0x10: [io 0x2000-0x20ff]
    [ 1.466916] pci 0000:03:00.0: reg 0x18: [mem 0xc1404000-0xc1404fff 64bit pref]
    [ 1.466934] pci 0000:03:00.0: reg 0x20: [mem 0xc1400000-0xc1403fff 64bit pref]
    [ 1.466946] pci 0000:03:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
    [ 1.467011] pci 0000:03:00.0: supports D1 D2
    [ 1.467012] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 1.467054] pci 0000:03:00.0: System wakeup disabled by ACPI
    [ 1.476687] pci 0000:00:1c.1: PCI bridge to [bus 03]
    [ 1.476695] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
    [ 1.476702] pci 0000:00:1c.1: bridge window [mem 0xc2400000-0xc33fffff]
    [ 1.476712] pci 0000:00:1c.1: bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
    [ 1.476826] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
    [ 1.476839] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 1.476840] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 1.476842] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 1.476843] pci 0000:00:1e.0: bridge window [mem 0xa0000000-0xfeafffff] (subtractive decode)
    [ 1.477284] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    [ 1.477332] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    [ 1.477378] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    [ 1.477428] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    [ 1.477474] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    [ 1.477521] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    [ 1.477569] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
    [ 1.477615] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
    [ 1.680263] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus 7f])
    [ 1.680266] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
    [ 1.680268] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
    [ 1.680328] PCI host bridge to bus 0000:7f
    [ 1.680331] pci_bus 0000:7f: root bus resource [bus 7f]
    [ 1.680335] pci 0000:7f:00.0: [8086:2c62] type 00 class 0x060000
    [ 1.680372] pci 0000:7f:00.1: [8086:2d01] type 00 class 0x060000
    [ 1.680411] pci 0000:7f:02.0: [8086:2d10] type 00 class 0x060000
    [ 1.680444] pci 0000:7f:02.1: [8086:2d11] type 00 class 0x060000
    [ 1.680478] pci 0000:7f:02.2: [8086:2d12] type 00 class 0x060000
    [ 1.680511] pci 0000:7f:02.3: [8086:2d13] type 00 class 0x060000
    [ 1.680856] ACPI: Enabled 7 GPEs in block 00 to 3F
    [ 1.680862] ACPI: \_SB_.PCI0: notify handler is installed
    [ 1.680897] ACPI: \_SB_.CPBG: notify handler is installed
    [ 1.680908] Found 2 acpi root devices
    [ 1.680944] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
    [ 1.681029] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 1.681034] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
    [ 1.681036] vgaarb: loaded
    [ 1.681036] vgaarb: bridge control possible 0000:01:00.0
    [ 1.681037] vgaarb: no bridge control possible 0000:00:02.0
    [ 1.681073] PCI: Using ACPI for IRQ routing
    [ 1.685883] PCI: pci_cache_line_size set to 64 bytes
    [ 1.685985] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
    [ 1.685987] e820: reserve RAM buffer [mem 0x9b63f000-0x9bffffff]
    [ 1.685988] e820: reserve RAM buffer [mem 0x9b800000-0x9bffffff]
    [ 1.686076] NetLabel: Initializing
    [ 1.686077] NetLabel: domain hash size = 128
    [ 1.686078] NetLabel: protocols = UNLABELED CIPSOv4
    [ 1.686090] NetLabel: unlabeled traffic allowed by default
    [ 1.686116] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 1.686121] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 1.688150] Switched to clocksource hpet
    [ 1.692075] pnp: PnP ACPI init
    [ 1.692093] ACPI: bus type PNP registered
    [ 1.692220] pnp 00:00: [dma 4]
    [ 1.692249] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 1.692269] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
    [ 1.692384] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 1.692417] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 1.692471] system 00:04: [io 0x0680-0x069f] has been reserved
    [ 1.692473] system 00:04: [io 0x0800-0x080f] has been reserved
    [ 1.692475] system 00:04: [io 0xffff] has been reserved
    [ 1.692477] system 00:04: [io 0xffff] has been reserved
    [ 1.692479] system 00:04: [io 0x0400-0x047f] could not be reserved
    [ 1.692480] system 00:04: [io 0x0500-0x057f] has been reserved
    [ 1.692482] system 00:04: [io 0x164e-0x164f] has been reserved
    [ 1.692484] system 00:04: [io 0x0380-0x038e] has been reserved
    [ 1.692487] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.692512] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 1.692543] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 1.692578] pnp 00:07: Plug and Play ACPI device, IDs SYN1e1d SYN1e00 SYN0002 PNP0f13 (active)
    [ 1.692691] pnp 00:08: Plug and Play ACPI device, IDs HPQ0004 (active)
    [ 1.692891] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 1.692893] system 00:09: [mem 0xfed10000-0xfed13fff] has been reserved
    [ 1.692895] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 1.692897] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 1.692899] system 00:09: [mem 0xf0000000-0xf1ffffff] has been reserved
    [ 1.692900] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 1.692905] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
    [ 1.692906] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 1.692908] system 00:09: [mem 0xc4600000-0xc4600fff] has been reserved
    [ 1.692911] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.891768] pnp: PnP ACPI: found 10 devices
    [ 1.891775] ACPI: bus type PNP unregistered
    [ 1.898277] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
    [ 1.898281] pci 0000:03:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
    [ 1.898320] pci 0000:01:00.0: BAR 6: assigned [mem 0xc4440000-0xc445ffff pref]
    [ 1.898323] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 1.898326] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
    [ 1.898328] pci 0000:00:01.0: bridge window [mem 0xc4400000-0xc44fffff]
    [ 1.898331] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
    [ 1.898334] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 1.898337] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
    [ 1.898343] pci 0000:00:1c.0: bridge window [mem 0xc3400000-0xc43fffff]
    [ 1.898347] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
    [ 1.898355] pci 0000:03:00.0: BAR 6: assigned [mem 0xc1410000-0xc141ffff pref]
    [ 1.898356] pci 0000:00:1c.1: PCI bridge to [bus 03]
    [ 1.898359] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
    [ 1.898365] pci 0000:00:1c.1: bridge window [mem 0xc2400000-0xc33fffff]
    [ 1.898369] pci 0000:00:1c.1: bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
    [ 1.898376] pci 0000:00:1e.0: PCI bridge to [bus 04]
    [ 1.898391] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 1.898392] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 1.898394] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 1.898395] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfeafffff]
    [ 1.898397] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
    [ 1.898399] pci_bus 0000:01: resource 1 [mem 0xc4400000-0xc44fffff]
    [ 1.898400] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
    [ 1.898402] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
    [ 1.898403] pci_bus 0000:02: resource 1 [mem 0xc3400000-0xc43fffff]
    [ 1.898405] pci_bus 0000:02: resource 2 [mem 0xc0400000-0xc13fffff 64bit pref]
    [ 1.898406] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
    [ 1.898408] pci_bus 0000:03: resource 1 [mem 0xc2400000-0xc33fffff]
    [ 1.898409] pci_bus 0000:03: resource 2 [mem 0xc1400000-0xc23fffff 64bit pref]
    [ 1.898411] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
    [ 1.898413] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
    [ 1.898414] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
    [ 1.898416] pci_bus 0000:04: resource 7 [mem 0xa0000000-0xfeafffff]
    [ 1.898448] NET: Registered protocol family 2
    [ 1.898658] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 1.898905] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 1.899101] TCP: Hash tables configured (established 65536 bind 65536)
    [ 1.899137] TCP: reno registered
    [ 1.899150] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 1.899184] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 1.899281] NET: Registered protocol family 1
    [ 1.899297] pci 0000:00:02.0: Boot video device
    [ 1.924902] PCI: CLS 64 bytes, default 64
    [ 1.924949] Unpacking initramfs...
    [ 1.973386] Freeing initrd memory: 2960K (ffff880037a28000 - ffff880037d0c000)
    [ 1.973392] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 1.973394] software IO TLB [mem 0x9763f000-0x9b63f000] (64MB) mapped at [ffff88009763f000-ffff88009b63efff]
    [ 1.973427] Simple Boot Flag at 0x44 set to 0x1
    [ 1.973607] Scanning for low memory corruption every 60 seconds
    [ 1.973892] audit: initializing netlink socket (disabled)
    [ 1.973905] type=2000 audit(1389034724.406:1): initialized
    [ 1.984356] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 1.985602] zbud: loaded
    [ 1.985767] VFS: Disk quotas dquot_6.5.2
    [ 1.985802] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 1.985955] msgmni has been set to 15569
    [ 1.986298] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 1.986347] io scheduler noop registered
    [ 1.986349] io scheduler deadline registered
    [ 1.986371] io scheduler cfq registered (default)
    [ 1.986564] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 1.986816] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 1.986829] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 1.986868] vesafb: mode is 1600x900x32, linelength=6400, pages=0
    [ 1.986869] vesafb: scrolling: redraw
    [ 1.986870] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 1.987210] vesafb: framebuffer at 0xb0000000, mapped to 0xffffc90008f00000, using 5632k, total 5632k
    [ 2.194780] Console: switching to colour frame buffer device 200x56
    [ 2.401807] fb0: VESA VGA frame buffer device
    [ 2.401818] intel_idle: MWAIT substates: 0x1120
    [ 2.401819] intel_idle: v0.4 model 0x25
    [ 2.401820] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 2.401952] GHES: HEST is not enabled!
    [ 2.402009] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 2.402448] Linux agpgart interface v0.103
    [ 2.402509] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 2.424294] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 2.424318] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 2.424413] mousedev: PS/2 mouse device common for all mice
    [ 2.426083] rtc_cmos 00:05: RTC can wake from S4
    [ 2.426226] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    [ 2.426258] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 2.426312] drop_monitor: Initializing network drop monitor service
    [ 2.426376] TCP: cubic registered
    [ 2.426451] NET: Registered protocol family 10
    [ 2.426607] NET: Registered protocol family 17
    [ 2.426615] Key type dns_resolver registered
    [ 2.426872] registered taskstats version 1
    [ 2.427642] Magic number: 14:769:998
    [ 2.427665] pnp 00:00: hash matches
    [ 2.427763] rtc_cmos 00:05: setting system clock to 2014-01-06 18:58:45 UTC (1389034725)
    [ 2.427806] PM: Hibernation image not present or could not be loaded.
    [ 2.428656] Freeing unused kernel memory: 1144K (ffffffff818cb000 - ffffffff819e9000)
    [ 2.428658] Write protecting the kernel read-only data: 8192k
    [ 2.430898] Freeing unused kernel memory: 1008K (ffff880001504000 - ffff880001600000)
    [ 2.431903] Freeing unused kernel memory: 420K (ffff880001797000 - ffff880001800000)
    [ 2.444295] systemd-udevd[57]: starting version 208
    [ 2.454799] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 2.473820] SCSI subsystem initialized
    [ 2.474804] ACPI: bus type USB registered
    [ 2.474841] usbcore: registered new interface driver usbfs
    [ 2.474855] usbcore: registered new interface driver hub
    [ 2.474933] usbcore: registered new device driver usb
    [ 2.474994] libata version 3.00 loaded.
    [ 2.475610] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 2.475775] ehci-pci: EHCI PCI platform driver
    [ 2.475950] ehci-pci 0000:00:1a.0: setting latency timer to 64
    [ 2.475967] ehci-pci 0000:00:1a.0: EHCI Host Controller
    [ 2.475975] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 2.475992] ehci-pci 0000:00:1a.0: debug port 2
    [ 2.479915] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
    [ 2.479939] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc450a000
    [ 2.487831] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 2.488136] hub 1-0:1.0: USB hub found
    [ 2.488148] hub 1-0:1.0: 3 ports detected
    [ 2.488623] ahci 0000:00:1f.2: version 3.0
    [ 2.488766] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
    [ 2.488870] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
    [ 2.488874] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems sxs apst
    [ 2.488880] ahci 0000:00:1f.2: setting latency timer to 64
    [ 2.508305] scsi0 : ahci
    [ 2.508478] scsi1 : ahci
    [ 2.508661] scsi2 : ahci
    [ 2.508872] scsi3 : ahci
    [ 2.509076] scsi4 : ahci
    [ 2.509232] scsi5 : ahci
    [ 2.509314] ata1: SATA max UDMA/133 abar m2048@0xc4508000 port 0xc4508100 irq 41
    [ 2.509319] ata2: SATA max UDMA/133 abar m2048@0xc4508000 port 0xc4508180 irq 41
    [ 2.509322] ata3: DUMMY
    [ 2.509324] ata4: DUMMY
    [ 2.509328] ata5: SATA max UDMA/133 abar m2048@0xc4508000 port 0xc4508300 irq 41
    [ 2.509332] ata6: SATA max UDMA/133 abar m2048@0xc4508000 port 0xc4508380 irq 41
    [ 2.509617] ehci-pci 0000:00:1d.0: setting latency timer to 64
    [ 2.509640] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 2.509655] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 2.509681] ehci-pci 0000:00:1d.0: debug port 2
    [ 2.513619] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 2.513636] ehci-pci 0000:00:1d.0: irq 21, io mem 0xc4509000
    [ 2.521138] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 2.521432] hub 2-0:1.0: USB hub found
    [ 2.521446] hub 2-0:1.0: 3 ports detected
    [ 2.794491] usb 1-1: new high-speed USB device number 2 using ehci-pci
    [ 2.827773] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 2.827866] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 2.830049] ata2.00: ATAPI: hp BD-ROM BC-5501H, 2.90, max UDMA/100
    [ 2.831101] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 2.831251] ata1.00: ATA-8: Corsair CSSD-F60GB2, 2.0, max UDMA/133
    [ 2.831257] ata1.00: 117231408 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
    [ 2.832374] ata2.00: configured for UDMA/100
    [ 2.834382] ata6: SATA link down (SStatus 0 SControl 300)
    [ 2.841297] ata1.00: configured for UDMA/133
    [ 2.841651] scsi 0:0:0:0: Direct-Access ATA Corsair CSSD-F60 2.0 PQ: 0 ANSI: 5
    [ 2.842799] scsi 1:0:0:0: CD-ROM hp BD ROM BC-5501H 2.90 PQ: 0 ANSI: 5
    [ 2.918525] hub 1-1:1.0: USB hub found
    [ 2.918713] hub 1-1:1.0: 6 ports detected
    [ 2.974340] tsc: Refined TSC clocksource calibration: 2527.281 MHz
    [ 3.024393] usb 2-1: new high-speed USB device number 2 using ehci-pci
    [ 3.148413] hub 2-1:1.0: USB hub found
    [ 3.148604] hub 2-1:1.0: 8 ports detected
    [ 3.227872] usb 1-1.1: new low-speed USB device number 3 using ehci-pci
    [ 3.231028] ata5.00: ATA-8: TOSHIBA MK5075GSX, GT001U, max UDMA/100
    [ 3.231032] ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 3.232183] ata5.00: configured for UDMA/100
    [ 3.232540] scsi 4:0:0:0: Direct-Access ATA TOSHIBA MK5075GS GT00 PQ: 0 ANSI: 5
    [ 3.236887] sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
    [ 3.236939] sd 4:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    [ 3.236941] sd 4:0:0:0: [sdb] 4096-byte physical blocks
    [ 3.237016] sd 4:0:0:0: [sdb] Write Protect is off
    [ 3.237019] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [ 3.237035] sd 0:0:0:0: [sda] Write Protect is off
    [ 3.237040] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 3.237050] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 3.237086] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 3.237518] sda: sda1 sda2 sda3 sda4
    [ 3.237920] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 3.237923] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 3.237954] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 3.238066] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [ 3.280297] sdb: sdb1 sdb3
    [ 3.281140] sd 4:0:0:0: [sdb] Attached SCSI disk
    [ 3.320840] hidraw: raw HID events driver (C) Jiri Kosina
    [ 3.324133] usbcore: registered new interface driver usbhid
    [ 3.324137] usbhid: USB HID core driver
    [ 3.324888] input: Microsoft Microsoft Basic Optical Mouse v2.0 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input2
    [ 3.325079] hid-generic 0003:045E:00CB.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse v2.0 ] on usb-0000:00:1a.0-1.1/input0
    [ 3.384362] usb 1-1.6: new full-speed USB device number 4 using ehci-pci
    [ 3.550965] usb 2-1.3: new full-speed USB device number 3 using ehci-pci
    [ 3.714287] usb 2-1.5: new high-speed USB device number 4 using ehci-pci
    [ 3.795307] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
    [ 3.853249] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
    [ 3.854872] systemd[1]: Set hostname to <HP-DV7>.
    [ 3.858373] systemd-fstab-generator[118]: Mount point swap is not a valid path, ignoring.
    [ 3.909882] systemd[1]: Cannot add dependency job for unit atieventsd.service, ignoring: Unit acpid.socket failed to load: No such file or directory.
    [ 3.910099] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 3.910161] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 3.910174] systemd[1]: Starting Login Prompts.
    [ 3.910186] systemd[1]: Reached target Login Prompts.
    [ 3.910195] systemd[1]: Starting Remote File Systems.
    [ 3.910203] systemd[1]: Reached target Remote File Systems.
    [ 3.910213] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 3.910241] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 3.910250] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 3.910267] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 3.910276] systemd[1]: Starting Delayed Shutdown Socket.
    [ 3.910299] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 3.910309] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 3.910330] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 3.910359] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 3.910451] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 3.910465] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 3.910492] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 3.910501] systemd[1]: Starting Paths.
    [ 3.910535] systemd[1]: Reached target Paths.
    [ 3.910550] systemd[1]: Starting udev Kernel Socket.
    [ 3.910571] systemd[1]: Listening on udev Kernel Socket.
    [ 3.910582] systemd[1]: Starting udev Control Socket.
    [ 3.910602] systemd[1]: Listening on udev Control Socket.
    [ 3.910612] systemd[1]: Starting Journal Socket.
    [ 3.910647] systemd[1]: Listening on Journal Socket.
    [ 3.910661] systemd[1]: Starting udev Coldplug all Devices...
    [ 3.911488] systemd[1]: Starting Apply Kernel Variables...
    [ 3.911775] systemd[1]: Mounting Huge Pages File System...
    [ 3.912052] systemd[1]: Mounting POSIX Message Queue File System...
    [ 3.914336] systemd[1]: Starting Load Kernel Modules...
    [ 3.919413] systemd[1]: Starting Create list of required static device nodes for the current kernel...
    [ 3.920515] systemd[1]: Started Set Up Additional Binary Formats.
    [ 3.920540] systemd[1]: Starting Journal Service...
    [ 3.920857] systemd[1]: Started Journal Service.
    [ 3.934908] systemd-journald[130]: Vacuuming done, freed 0 bytes
    [ 3.936662] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
    [ 3.936668] ACPI: Power Button [PWRB]
    [ 3.936710] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
    [ 3.937069] ACPI: Lid Switch [LID0]
    [ 3.937129] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
    [ 3.937132] ACPI: Power Button [PWRF]
    [ 3.938040] AMD IOMMUv2 driver by Joerg Roedel <[email protected]>
    [ 3.938042] AMD IOMMUv2 functionality not available on this system
    [ 3.968968] EXT4-fs (sda4): re-mounted. Opts: discard
    [ 3.974125] Switched to clocksource tsc
    [ 3.990703] systemd-udevd[155]: starting version 208
    [ 3.994113] systemd-journald[130]: Received request to flush runtime journal from PID 1
    [ 4.011409] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
    [ 4.011415] Disabling lock debugging due to kernel taint
    [ 4.022291] <6>[fglrx] Maximum main memory to use for locked dma buffers: 7558 MBytes.
    [ 4.022509] <6>[fglrx] vendor: 1002 device: 68c1 count: 1
    [ 4.022812] <6>[fglrx] ioport: bar 4, base 0x4000, size: 0x100
    [ 4.022823] pci 0000:01:00.0: enabling device (0000 -> 0003)
    [ 4.023031] <6>[fglrx] Kernel PAT support is enabled
    [ 4.023051] <6>[fglrx] module loaded - fglrx 13.25.5 [Dec 6 2013] with 1 minors
    [ 4.092258] ACPI: Requesting acpi_cpufreq
    [ 4.101543] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130725/utaddress-251)
    [ 4.101553] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 4.101558] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
    [ 4.101563] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \SGGP 2 (20130725/utaddress-251)
    [ 4.101568] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \_SB_.PCI0.P0P3.PEGP.GPIO 3 (20130725/utaddress-251)
    [ 4.101573] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 4.101575] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
    [ 4.101580] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \SGGP 2 (20130725/utaddress-251)
    [ 4.101585] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.P0P3.PEGP.GPIO 3 (20130725/utaddress-251)
    [ 4.101589] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 4.101591] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
    [ 4.101595] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \SGGP 2 (20130725/utaddress-251)
    [ 4.101600] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.P0P3.PEGP.GPIO 3 (20130725/utaddress-251)
    [ 4.101604] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 4.101606] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 4.103941] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
    [ 4.104143] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled until i915 loads
    [ 4.106273] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
    [ 4.106627] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
    [ 4.106742] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
    [ 4.108091] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
    [ 4.108226] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
    [ 4.108419] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 4.109161] mei_me 0000:00:16.0: setting latency timer to 64
    [ 4.109212] mei_me 0000:00:16.0: irq 42 for MSI/MSI-X
    [ 4.116824] ACPI Warning: 0x0000000000005000-0x000000000000501f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130725/utaddress-251)
    [ 4.116833] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 4.125699] [drm] Initialized drm 1.1.0 20060810
    [ 4.151578] [Firmware Bug]: Invalid critical threshold (0)
    [ 4.152801] hp_accel: hardware type DV7 found
    [ 4.153398] lis3lv02d: 8 bits sensor found
    [ 4.162429] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 4.162451] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 4.162458] pcieport 0000:00:1c.1: driver skip pci_set_master, fix it!
    [ 4.162734] r8169 0000:03:00.0: irq 43 for MSI/MSI-X
    [ 4.163141] [drm] Memory usable by graphics device = 2048M
    [ 4.163146] checking generic (b0000000 580000) vs hw (b0000000 10000000)
    [ 4.163149] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
    [ 4.163171] Console: switching to colour dummy device 80x25
    [ 4.163258] r8169 0000:03:00.0 eth0: RTL8168d/8111d at 0xffffc90008efe000, 78:ac:c0:41:2a:dc, XID 083000c0 IRQ 43
    [ 4.163262] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    [ 4.165071] thermal LNXTHERM:00: registered as thermal_zone0
    [ 4.165073] ACPI: Thermal Zone [TZ01] (60 C)
    [ 4.167001] i915 0000:00:02.0: setting latency timer to 64
    [ 4.189598] Bluetooth: Core ver 2.16
    [ 4.189618] NET: Registered protocol family 31
    [ 4.189620] Bluetooth: HCI device and connection manager initialized
    [ 4.189632] Bluetooth: HCI socket layer initialized
    [ 4.189636] Bluetooth: L2CAP socket layer initialized
    [ 4.189642] Bluetooth: SCO socket layer initialized
    [ 4.189750] cfg80211: Calling CRDA to update world regulatory domain
    [ 4.193820] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input6
    [ 4.200427] Intel(R) Wireless WiFi driver for Linux, in-tree:
    [ 4.200432] Copyright(c) 2003-2013 Intel Corporation
    [ 4.200504] pcieport 0000:00:1c.0: driver skip pci_set_master, fix it!
    [ 4.200613] iwlwifi 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 4.200826] iwlwifi 0000:02:00.0: irq 44 for MSI/MSI-X
    [ 4.203438] usbcore: registered new interface driver btusb
    [ 4.206393] iwlwifi 0000:02:00.0: loaded firmware version 39.31.5.1 build 35138 op_mode iwldvm
    [ 4.209620] i915 0000:00:02.0: irq 45 for MSI/MSI-X
    [ 4.209634] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 4.209636] [drm] Driver supports precise vblank timestamp query.
    [ 4.209838] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=none
    [ 4.212021] input: PC Speaker as /devices/platform/pcspkr/input/input7
    [ 4.224616] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2
    [ 4.235557] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
    [ 4.235562] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
    [ 4.235564] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
    [ 4.235566] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C
    [ 4.235664] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 4.259013] fbcon: inteldrmfb (fb0) is primary device
    [ 4.262350] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
    [ 4.284850] iTCO_vendor_support: vendor-support=0
    [ 4.285523] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
    [ 4.285561] iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0460)
    [ 4.285676] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 4.286793] media: Linux media interface: v0.10
    [ 4.290737] Linux video capture interface: v2.00
    [ 4.301250] systemd-udevd[174]: renamed network interface eth0 to enp3s0
    [ 4.302202] uvcvideo: Found UVC 1.00 device HP Webcam (064e:f209)
    [ 4.304880] cfg80211: World regulatory domain updated:
    [ 4.304881] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [ 4.304883] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    [ 4.304883] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    [ 4.304884] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
    [ 4.304885] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
    [ 4.304886] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
    [ 4.304887] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
    [ 4.309128] input: HP Webcam as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input9
    [ 4.309335] usbcore: registered new interface driver uvcvideo
    [ 4.309336] USB Video Class driver (1.1.1)
    [ 4.311646] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x2
    [ 4.316794] ACPI: Battery Slot [BAT0] (battery present)
    [ 4.325688] microcode: CPU2 sig=0x20655, pf=0x10, revision=0x2
    [ 4.327465] microcode: CPU3 sig=0x20655, pf=0x10, revision=0x2
    [ 4.328001] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 4.337248] systemd-udevd[192]: renamed network interface wlan0 to wlo1
    [ 4.345739] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
    [ 4.355989] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 4.364320] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3
    [ 4.398187] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 4.405698] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3
    [ 4.414845] ACPI: AC Adapter [ACAD] (on-line)
    [ 4.415293] wmi: Mapper loaded
    [ 4.435932] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
    [ 4.467799] input: HP WMI hotkeys as /devices/virtual/input/input10
    [ 4.498300] r8169 0000:03:00.0 enp3s0: link down
    [ 4.498337] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
    [ 5.050228] Console: switching to colour frame buffer device 200x56
    [ 5.056819] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    [ 5.056821] i915 0000:00:02.0: registered panic notifier
    [ 5.062898] acpi device:02: registered as cooling_device5
    [ 5.063042] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 5.063105] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input11
    [ 5.074847] acpi device:14: registered as cooling_device6
    [ 5.081681] acpi device:15: registered as cooling_device7
    [ 5.081715] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
    [ 5.081795] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:11/LNXVIDEO:02/input/input12
    [ 5.081995] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 5.082246] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
    [ 5.096419] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input13
    [ 5.114610] input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
    [ 5.114695] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
    [ 5.114984] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
    [ 5.115037] snd_hda_intel 0000:01:00.1: irq 47 for MSI/MSI-X
    [ 5.123576] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
    [ 5.343735] wlo1: authenticate with 04:a1:51:18:3f:5a
    [ 5.357336] wlo1: send auth to 04:a1:51:18:3f:5a (try 1/3)
    [ 5.360056] wlo1: authenticated
    [ 5.363243] wlo1: associate with 04:a1:51:18:3f:5a (try 1/3)
    [ 5.367023] wlo1: RX AssocResp from 04:a1:51:18:3f:5a (capab=0x411 status=0 aid=1)
    [ 5.370719] wlo1: associated
    [ 5.370764] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
    [ 5.649701] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xe40000/0x5a0400, board id: 3655, fw id: 631163
    [ 5.737424] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
    [ 9.301633] intel ips 0000:00:1f.6: i915 driver attached, reenabling gpu turbo
    [ 12.411184] systemd-journald[130]: File /var/log/journal/9f3480e1044d4c389152563598411bae/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
    [ 12.848912] fuse init (API version 7.22)
    [ 14.026946] traps: cinnamon[570] trap int3 ip:7ff3d815c289 sp:7fffd52060f0 error:0
    [ 14.114772] systemd-journald[130]: Deleted empty journal /var/log/journal/9f3480e1044d4c389152563598411bae/[email protected]~ (3256320 bytes).
    [ 14.116644] systemd-journald[130]: Vacuuming done, freed 10727424 bytes
    [ 14.129219] systemd-journald[130]: Failed to write entry (26 items, 14336620 bytes) despite vacuuming, ignoring: Argument list too long
    [ 14.305135] ISO 9660 Extensions: Microsoft Joliet Level 3
    [ 14.347792] ISO 9660 Extensions: RRIP_1991A
    [ 62.027286] Corrupted low memory at ffff880000006598 (6598 phys) = 100000000000
    [ 62.027363] ------------[ cut here ]------------
    [ 62.027373] WARNING: CPU: 0 PID: 45 at arch/x86/kernel/check.c:140 check_for_bios_corruption+0x10f/0x120()
    [ 62.027375] Memory corruption detected in low memory
    [ 62.027417] Modules linked in: nls_utf8 isofs fuse snd_hda_codec_hdmi snd_hda_codec_idt hp_wmi sparse_keymap joydev intel_powerclamp coretemp kvm_intel kvm crc32c_intel uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core videodev media iTCO_wdt iTCO_vendor_support arc4 iwldvm mac80211 microcode psmouse serio_raw pcspkr btusb iwlwifi bluetooth cfg80211 r8169 snd_hda_intel rfkill hp_accel mii i915 thermal snd_hda_codec lis3lv02d wmi snd_hwdep snd_pcm input_polldev drm_kms_helper snd_page_alloc ac video drm snd_timer i2c_i801 i2c_algo_bit snd battery mei_me i2c_core soundcore intel_agp mei shpchp intel_ips intel_gtt lpc_ich acpi_cpufreq processor evdev fglrx(PO) amd_iommu_v2 button ext4 crc16 mbcache jbd2 hid_generic usbhid hid sr_mod cdrom sd_mod ahci ehci_pci ehci_hcd libahci libata scsi_mod
    [ 62.027498] usbcore usb_common
    [ 62.027504] CPU: 0 PID: 45 Comm: kworker/0:2 Tainted: P O 3.12.6-1-ARCH #1
    [ 62.027506] Hardware name: Hewlett-Packard HP Pavilion dv7 Notebook PC/144B, BIOS F.29 11/07/2011
    [ 62.027511] Workqueue: events check_corruption
    [ 62.027513] 0000000000000009 ffff88024f0b5d30 ffffffff814ee4fb ffff88024f0b5d78
    [ 62.027518] ffff88024f0b5d68 ffffffff81062bcd 0000000000000000 ffff880000010000
    [ 62.027521] ffffffff81a28c50 0000000000000001 ffff880000000000 ffff88024f0b5dc8
    [ 62.027525] Call Trace:
    [ 62.027534] [<ffffffff814ee4fb>] dump_stack+0x54/0x8d
    [ 62.027541] [<ffffffff81062bcd>] warn_slowpath_common+0x7d/0xa0
    [ 62.027545] [<ffffffff81062c3c>] warn_slowpath_fmt+0x4c/0x50
    [ 62.027548] [<ffffffff8105046f>] check_for_bios_corruption+0x10f/0x120
    [ 62.027552] [<ffffffff8105048e>] check_corruption+0xe/0x40
    [ 62.027558] [<ffffffff8107dbc7>] process_one_work+0x167/0x450
    [ 62.027561] [<ffffffff8107e5d1>] worker_thread+0x121/0x3a0
    [ 62.027565] [<ffffffff8107e4b0>] ? manage_workers.isra.23+0x2b0/0x2b0
    [ 62.027572] [<ffffffff81084fe0>] kthread+0xc0/0xd0
    [ 62.027576] [<ffffffff81084f20>] ? kthread_create_on_node+0x120/0x120
    [ 62.027581] [<ffffffff814fcffc>] ret_from_fork+0x7c/0xb0
    [ 62.027585] [<ffffffff81084f20>] ? kthread_create_on_node+0x120/0x120
    [ 62.027588] ---[ end trace 7db8b9483b232f3c ]---
    [ 379.895022] systemd-journald[130]: Vacuuming done, freed 7458816 bytes
    [ 382.437200] usb 2-1.1: new high-speed USB device number 5 using ehci-pci
    [ 382.535763] usb-storage 2-1.1:1.0: USB Mass Storage device detected
    [ 382.535904] scsi6 : usb-storage 2-1.1:1.0
    [ 382.536046] usbcore: registered new interface driver usb-storage
    [ 383.537746] scsi 6:0:0:0: Direct-Access SanDisk Cruzer Glide 1.26 PQ: 0 ANSI: 5
    [ 383.539529] sd 6:0:0:0: [sdc] 31266816 512-byte logical blocks: (16.0 GB/14.9 GiB)
    [ 383.541031] sd 6:0:0:0: [sdc] Write Protect is off
    [ 383.541037] sd 6:0:0:0: [sdc] Mode Sense: 43 00 00 00
    [ 383.542023] sd 6:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
    [ 383.554355] sdc: sdc1
    [ 383.558183] sd 6:0:0:0: [sdc] Attached SCSI removable disk
    If I run aticonfig --intial, xorg does not start and the dmesg output is:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.12.6-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.2 (GCC) ) #1 SMP PREEMPT Fri Dec 20 19:39:00 CET 2013
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a303086c-e564-4347-92f1-8ec5ecbdcf85 ro quiet
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009b63efff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009b63f000-0x000000009b6befff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000009b6bf000-0x000000009b7befff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009b7bf000-0x000000009b7fefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x000000009b7ff000-0x000000009b7fffff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009b800000-0x000000009fffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1b000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ffe80000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001fbffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000001fc000000-0x00000001ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000200000000-0x000000025bffffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.6 present.
    [ 0.000000] DMI: Hewlett-Packard HP Pavilion dv7 Notebook PC/144B, BIOS F.29 11/07/2011
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x25c000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-EFFFF write-through
    [ 0.000000] F0000-FFFFF write-combining
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 base 0FFE00000 mask FFFE00000 write-protect
    [ 0.000000] 2 base 080000000 mask FE0000000 write-back
    [ 0.000000] 3 base 09C000000 mask FFC000000 uncachable
    [ 0.000000] 4 base 09B800000 mask FFF800000 uncachable
    [ 0.000000] 5 base 100000000 mask F00000000 write-back
    [ 0.000000] 6 base 200000000 mask F80000000 write-back
    [ 0.000000] 7 base 25C000000 mask FFC000000 uncachable
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: last_pfn = 0x9b800 max_arch_pfn = 0x400000000
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
    [ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
    [ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x25be00000-0x25bfffff

    I have toyed with the catalyst-total-pxp configuration and it will now launch x but executing a cinnamon session kicks me back out into the console.
    E: Dmesg output and Xorg log both look fine (to me).
    dmesg
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.12.8-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.2 20131219 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Jan 16 09:16:34 CET 2014
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a303086c-e564-4347-92f1-8ec5ecbdcf85 rw
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009b63efff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009b63f000-0x000000009b6befff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000009b6bf000-0x000000009b7befff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009b7bf000-0x000000009b7fefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x000000009b7ff000-0x000000009b7fffff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009b800000-0x000000009fffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1b000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ffe80000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001fbffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000001fc000000-0x00000001ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000200000000-0x000000025bffffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.6 present.
    [ 0.000000] DMI: Hewlett-Packard HP Pavilion dv7 Notebook PC/144B, BIOS F.29 11/07/2011
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x25c000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-EFFFF write-through
    [ 0.000000] F0000-FFFFF write-combining
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 base 0FFE00000 mask FFFE00000 write-protect
    [ 0.000000] 2 base 080000000 mask FE0000000 write-back
    [ 0.000000] 3 base 09C000000 mask FFC000000 uncachable
    [ 0.000000] 4 base 09B800000 mask FFF800000 uncachable
    [ 0.000000] 5 base 100000000 mask F00000000 write-back
    [ 0.000000] 6 base 200000000 mask F80000000 write-back
    [ 0.000000] 7 base 25C000000 mask FFC000000 uncachable
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: last_pfn = 0x9b800 max_arch_pfn = 0x400000000
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
    [ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
    [ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x25be00000-0x25bffffff]
    [ 0.000000] [mem 0x25be00000-0x25bffffff] page 2M
    [ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x258000000-0x25bdfffff]
    [ 0.000000] [mem 0x258000000-0x25bdfffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x200000000-0x257ffffff]
    [ 0.000000] [mem 0x200000000-0x257ffffff] page 2M
    [ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x9b63efff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x9b5fffff] page 2M
    [ 0.000000] [mem 0x9b600000-0x9b63efff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x9b7ff000-0x9b7fffff]
    [ 0.000000] [mem 0x9b7ff000-0x9b7fffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1fbffffff]
    [ 0.000000] [mem 0x100000000-0x1fbffffff] page 2M
    [ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
    [ 0.000000] RAMDISK: [mem 0x37a28000-0x37d0bfff]
    [ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HPQOEM)
    [ 0.000000] ACPI: XSDT 000000009b7fe120 0007C (v01 HPQOEM SLIC-MPC 00000001 01000013)
    [ 0.000000] ACPI: FACP 000000009b7fc000 000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: DSDT 000000009b7e9000 0F50F (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: FACS 000000009b75e000 00040
    [ 0.000000] ACPI: ASF! 000000009b7fd000 000A5 (v32 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: HPET 000000009b7fb000 00038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: APIC 000000009b7fa000 0008C (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: MCFG 000000009b7f9000 0003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: SLIC 000000009b7e8000 00176 (v01 HPQOEM SLIC-MPC 00000001 SLIC 000F4240)
    [ 0.000000] ACPI: BOOT 000000009b7e5000 00028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: ASPT 000000009b7e2000 00034 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: WDAT 000000009b7e1000 00224 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: SSDT 000000009b7e0000 009F1 (v01 PmRef CpuPm 00003000 INTL 20051117)
    [ 0.000000] ACPI: SSDT 000000009b7de000 01B34 (v01 AmdRef AmdTabl 00001000 INTL 20051117)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000025bffffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x25bffffff]
    [ 0.000000] NODE_DATA [mem 0x25bff5000-0x25bff9fff]
    [ 0.000000] [ffffea0000000000-ffffea00097fffff] PMD -> [ffff880253600000-ffff88025b5fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x25bffffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
    [ 0.000000] node 0: [mem 0x00100000-0x9b63efff]
    [ 0.000000] node 0: [mem 0x9b7ff000-0x9b7fffff]
    [ 0.000000] node 0: [mem 0x100000000-0x1fbffffff]
    [ 0.000000] node 0: [mem 0x200000000-0x25bffffff]
    [ 0.000000] On node 0 totalpages: 2045404
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3996 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 9881 pages used for memmap
    [ 0.000000] DMA32 zone: 632384 pages, LIFO batch:31
    [ 0.000000] Normal zone: 22272 pages used for memmap
    [ 0.000000] Normal zone: 1409024 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9b63f000-0x9b6befff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9b6bf000-0x9b7befff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9b7bf000-0x9b7fefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9b800000-0x9fffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xa0000000-0xefffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfeafffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1afff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1b000-0xfed1ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffe7ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xffe80000-0xffffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x1fc000000-0x1ffffffff]
    [ 0.000000] e820: [mem 0xa0000000-0xefffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88025bc00000 s86464 r8192 d24128 u262144
    [ 0.000000] pcpu-alloc: s86464 r8192 d24128 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2013166
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a303086c-e564-4347-92f1-8ec5ecbdcf85 rw
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 7968736K/8181616K available (5116K kernel code, 807K rwdata, 1628K rodata, 1144K init, 1288K bss, 212880K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
    [ 0.000000] NR_IRQS:8448 nr_irqs:744 16
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 33554432 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.003333] tsc: Detected 2527.115 MHz processor
    [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5056.82 BogoMIPS (lpj=8423716)
    [ 0.000006] pid_max: default: 32768 minimum: 301
    [ 0.000034] Security Framework initialized
    [ 0.000044] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000045] Yama: becoming mindful.
    [ 0.000540] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.002404] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.003228] Mount-cache hash table entries: 256
    [ 0.003423] Initializing cgroup subsys memory
    [ 0.003435] Initializing cgroup subsys devices
    [ 0.003437] Initializing cgroup subsys freezer
    [ 0.003439] Initializing cgroup subsys net_cls
    [ 0.003440] Initializing cgroup subsys blkio
    [ 0.003461] CPU: Physical Processor ID: 0
    [ 0.003462] CPU: Processor Core ID: 0
    [ 0.003467] mce: CPU supports 9 MCE banks
    [ 0.003478] CPU0: Thermal monitoring enabled (TM1)
    [ 0.003488] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
    Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
    tlb_flushall_shift: 6
    [ 0.003577] Freeing SMP alternatives memory: 20K (ffffffff819e9000 - ffffffff819ee000)
    [ 0.004553] ACPI: Core revision 20130725
    [ 0.013862] ACPI: All ACPI Tables successfully acquired
    [ 0.040074] ftrace: allocating 20317 entries in 80 pages
    [ 0.050041] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.083030] smpboot: CPU0: Intel(R) Core(TM) i5 CPU M 460 @ 2.53GHz (fam: 06, model: 25, stepping: 05)
    [ 0.187276] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
    [ 0.187282] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
    [ 0.187285] ... version: 3
    [ 0.187285] ... bit width: 48
    [ 0.187286] ... generic registers: 4
    [ 0.187287] ... value mask: 0000ffffffffffff
    [ 0.187288] ... max period: 000000007fffffff
    [ 0.187289] ... fixed-purpose events: 3
    [ 0.187290] ... event mask: 000000070000000f
    [ 0.663841] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.650477] smpboot: Booting Node 0, Processors # 1 # 2 # 3 OK
    [ 0.703729] Brought up 4 CPUs
    [ 0.703734] smpboot: Total of 4 processors activated (20225.29 BogoMIPS)
    [ 0.706247] devtmpfs: initialized
    [ 0.709362] PM: Registering ACPI NVS region [mem 0x9b6bf000-0x9b7befff] (1048576 bytes)
    [ 0.710207] RTC time: 6:14:18, date: 01/25/14
    [ 0.710248] NET: Registered protocol family 16
    [ 0.710345] cpuidle: using governor ladder
    [ 0.710347] cpuidle: using governor menu
    [ 0.710375] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.710377] ACPI: bus type PCI registered
    [ 0.710379] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.710443] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
    [ 0.710446] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
    [ 0.717442] PCI: Using configuration type 1 for base access
    [ 0.718023] bio: create slab <bio-0> at 0
    [ 0.718137] ACPI: Added _OSI(Module Device)
    [ 0.718139] ACPI: Added _OSI(Processor Device)
    [ 0.718140] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.718141] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.719738] ACPI: EC: Look up EC in DSDT
    [ 0.727062] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.732709] ACPI: SSDT 000000009b691918 00432 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    [ 0.733085] ACPI: Dynamic OEM Table Load:
    [ 0.733087] ACPI: SSDT (null) 00432 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    [ 0.733226] ACPI: SSDT 000000009b68f018 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.733586] ACPI: Dynamic OEM Table Load:
    [ 0.733588] ACPI: SSDT (null) 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.757289] ACPI: SSDT 000000009b690a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.757699] ACPI: Dynamic OEM Table Load:
    [ 0.757701] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.767184] ACPI: SSDT 000000009b68ed98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.767569] ACPI: Dynamic OEM Table Load:
    [ 0.767571] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.827076] ACPI: Interpreter enabled
    [ 0.827091] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
    [ 0.827097] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
    [ 0.827117] ACPI: (supports S0 S3 S4 S5)
    [ 0.827119] ACPI: Using IOAPIC for interrupt routing
    [ 0.827154] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.827263] ACPI: No dock devices found.
    [ 1.461183] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
    [ 1.461215] \_SB_.PCI0:_OSC invalid UUID
    [ 1.461216] _OSC request data:1 8 0
    [ 1.461245] \_SB_.PCI0:_OSC invalid UUID
    [ 1.461246] _OSC request data:1 1f 0
    [ 1.461249] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
    [ 1.461251] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
    [ 1.461907] PCI host bridge to bus 0000:00
    [ 1.461911] pci_bus 0000:00: root bus resource [bus 00-7e]
    [ 1.461912] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 1.461914] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 1.461915] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 1.461917] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xfeafffff]
    [ 1.461925] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
    [ 1.461941] DMAR: Disabling batched IOTLB flush on Ironlake
    [ 1.462003] pci 0000:00:01.0: [8086:0045] type 01 class 0x060400
    [ 1.462034] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 1.462069] pci 0000:00:01.0: System wakeup disabled by ACPI
    [ 1.462102] pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
    [ 1.462112] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc03fffff 64bit]
    [ 1.462118] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
    [ 1.462122] pci 0000:00:02.0: reg 0x20: [io 0x5050-0x5057]
    [ 1.462225] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
    [ 1.462253] pci 0000:00:16.0: reg 0x10: [mem 0xc4504000-0xc450400f 64bit]
    [ 1.462346] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 1.462430] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
    [ 1.462844] pci 0000:00:1a.0: reg 0x10: [mem 0xc450a000-0xc450a3ff]
    [ 1.465285] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 1.465342] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 1.465384] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
    [ 1.465404] pci 0000:00:1b.0: reg 0x10: [mem 0xc4500000-0xc4503fff 64bit]
    [ 1.465500] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 1.465545] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 1.465580] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
    [ 1.465677] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 1.465723] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 1.465756] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
    [ 1.465853] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 1.465899] pci 0000:00:1c.1: System wakeup disabled by ACPI
    [ 1.465946] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
    [ 1.466360] pci 0000:00:1d.0: reg 0x10: [mem 0xc4509000-0xc45093ff]
    [ 1.468800] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 1.468856] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 1.468891] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
    [ 1.468992] pci 0000:00:1e.0: System wakeup disabled by ACPI
    [ 1.469026] pci 0000:00:1f.0: [8086:3b09] type 00 class 0x060100
    [ 1.469192] pci 0000:00:1f.2: [8086:3b29] type 00 class 0x010601
    [ 1.469218] pci 0000:00:1f.2: reg 0x10: [io 0x5048-0x504f]
    [ 1.469229] pci 0000:00:1f.2: reg 0x14: [io 0x505c-0x505f]
    [ 1.469239] pci 0000:00:1f.2: reg 0x18: [io 0x5040-0x5047]
    [ 1.469250] pci 0000:00:1f.2: reg 0x1c: [io 0x5058-0x505b]
    [ 1.469261] pci 0000:00:1f.2: reg 0x20: [io 0x5020-0x503f]
    [ 1.469272] pci 0000:00:1f.2: reg 0x24: [mem 0xc4508000-0xc45087ff]
    [ 1.469336] pci 0000:00:1f.2: PME# supported from D3hot
    [ 1.469405] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
    [ 1.469425] pci 0000:00:1f.3: reg 0x10: [mem 0xc4506000-0xc45060ff 64bit]
    [ 1.469455] pci 0000:00:1f.3: reg 0x20: [io 0x5000-0x501f]
    [ 1.469543] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
    [ 1.469570] pci 0000:00:1f.6: reg 0x10: [mem 0xc4507000-0xc4507fff 64bit]
    [ 1.469761] pci 0000:01:00.0: [1002:68c1] type 00 class 0x030000
    [ 1.469775] pci 0000:01:00.0: reg 0x10: [mem 0xa0000000-0xafffffff 64bit pref]
    [ 1.469785] pci 0000:01:00.0: reg 0x18: [mem 0xc4400000-0xc441ffff 64bit]
    [ 1.469792] pci 0000:01:00.0: reg 0x20: [io 0x4000-0x40ff]
    [ 1.469803] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
    [ 1.469840] pci 0000:01:00.0: supports D1 D2
    [ 1.469884] pci 0000:01:00.1: [1002:aa60] type 00 class 0x040300
    [ 1.469899] pci 0000:01:00.1: reg 0x10: [mem 0xc4420000-0xc4423fff 64bit]
    [ 1.469966] pci 0000:01:00.1: supports D1 D2
    [ 1.470024] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 1.470027] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
    [ 1.470029] pci 0000:00:01.0: bridge window [mem 0xc4400000-0xc44fffff]
    [ 1.470032] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
    [ 1.470151] pci 0000:02:00.0: [8086:0084] type 00 class 0x028000
    [ 1.470195] pci 0000:02:00.0: reg 0x10: [mem 0xc3400000-0xc3401fff 64bit]
    [ 1.470407] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
    [ 1.480075] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 1.480083] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
    [ 1.480090] pci 0000:00:1c.0: bridge window [mem 0xc3400000-0xc43fffff]
    [ 1.480101] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
    [ 1.480205] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
    [ 1.480221] pci 0000:03:00.0: reg 0x10: [io 0x2000-0x20ff]
    [ 1.480247] pci 0000:03:00.0: reg 0x18: [mem 0xc1404000-0xc1404fff 64bit pref]
    [ 1.480264] pci 0000:03:00.0: reg 0x20: [mem 0xc1400000-0xc1403fff 64bit pref]
    [ 1.480276] pci 0000:03:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
    [ 1.480339] pci 0000:03:00.0: supports D1 D2
    [ 1.480340] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 1.480382] pci 0000:03:00.0: System wakeup disabled by ACPI
    [ 1.490020] pci 0000:00:1c.1: PCI bridge to [bus 03]
    [ 1.490028] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
    [ 1.490035] pci 0000:00:1c.1: bridge window [mem 0xc2400000-0xc33fffff]
    [ 1.490046] pci 0000:00:1c.1: bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
    [ 1.490160] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
    [ 1.490173] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 1.490174] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 1.490176] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 1.490177] pci 0000:00:1e.0: bridge window [mem 0xa0000000-0xfeafffff] (subtractive decode)
    [ 1.490618] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    [ 1.490666] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    [ 1.490712] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    [ 1.490761] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    [ 1.490808] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    [ 1.490854] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    [ 1.490902] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
    [ 1.490948] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
    [ 1.693626] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus 7f])
    [ 1.693629] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
    [ 1.693631] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
    [ 1.693691] PCI host bridge to bus 0000:7f
    [ 1.693694] pci_bus 0000:7f: root bus resource [bus 7f]
    [ 1.693698] pci 0000:7f:00.0: [8086:2c62] type 00 class 0x060000
    [ 1.693735] pci 0000:7f:00.1: [8086:2d01] type 00 class 0x060000
    [ 1.693774] pci 0000:7f:02.0: [8086:2d10] type 00 class 0x060000
    [ 1.693808] pci 0000:7f:02.1: [8086:2d11] type 00 class 0x060000
    [ 1.693841] pci 0000:7f:02.2: [8086:2d12] type 00 class 0x060000
    [ 1.693875] pci 0000:7f:02.3: [8086:2d13] type 00 class 0x060000
    [ 1.694220] ACPI: Enabled 7 GPEs in block 00 to 3F
    [ 1.694226] ACPI: \_SB_.PCI0: notify handler is installed
    [ 1.694261] ACPI: \_SB_.CPBG: notify handler is installed
    [ 1.694272] Found 2 acpi root devices
    [ 1.694307] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
    [ 1.694393] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 1.694397] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
    [ 1.694399] vgaarb: loaded
    [ 1.694400] vgaarb: bridge control possible 0000:01:00.0
    [ 1.694401] vgaarb: no bridge control possible 0000:00:02.0
    [ 1.694436] PCI: Using ACPI for IRQ routing
    [ 1.699238] PCI: pci_cache_line_size set to 64 bytes
    [ 1.699337] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
    [ 1.699339] e820: reserve RAM buffer [mem 0x9b63f000-0x9bffffff]
    [ 1.699340] e820: reserve RAM buffer [mem 0x9b800000-0x9bffffff]
    [ 1.699428] NetLabel: Initializing
    [ 1.699429] NetLabel: domain hash size = 128
    [ 1.699430] NetLabel: protocols = UNLABELED CIPSOv4
    [ 1.699443] NetLabel: unlabeled traffic allowed by default
    [ 1.699467] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 1.699472] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 1.701500] Switched to clocksource hpet
    [ 1.705449] pnp: PnP ACPI init
    [ 1.705466] ACPI: bus type PNP registered
    [ 1.705591] pnp 00:00: [dma 4]
    [ 1.705621] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 1.705641] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
    [ 1.705757] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 1.705791] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 1.705846] system 00:04: [io 0x0680-0x069f] has been reserved
    [ 1.705848] system 00:04: [io 0x0800-0x080f] has been reserved
    [ 1.705850] system 00:04: [io 0xffff] has been reserved
    [ 1.705852] system 00:04: [io 0xffff] has been reserved
    [ 1.705853] system 00:04: [io 0x0400-0x047f] could not be reserved
    [ 1.705855] system 00:04: [io 0x0500-0x057f] has been reserved
    [ 1.705857] system 00:04: [io 0x164e-0x164f] has been reserved
    [ 1.705858] system 00:04: [io 0x0380-0x038e] has been reserved
    [ 1.705861] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.705887] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 1.705918] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 1.705955] pnp 00:07: Plug and Play ACPI device, IDs SYN1e1d SYN1e00 SYN0002 PNP0f13 (active)
    [ 1.706069] pnp 00:08: Plug and Play ACPI device, IDs HPQ0004 (active)
    [ 1.706268] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 1.706270] system 00:09: [mem 0xfed10000-0xfed13fff] has been reserved
    [ 1.706272] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 1.706274] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 1.706275] system 00:09: [mem 0xf0000000-0xf1ffffff] has been reserved
    [ 1.706277] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 1.706281] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
    [ 1.706283] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 1.706285] system 00:09: [mem 0xc4600000-0xc4600fff] has been reserved
    [ 1.706287] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.905114] pnp: PnP ACPI: found 10 devices
    [ 1.905115] ACPI: bus type PNP unregistered
    [ 1.911635] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
    [ 1.911639] pci 0000:03:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
    [ 1.911677] pci 0000:01:00.0: BAR 6: assigned [mem 0xc4440000-0xc445ffff pref]
    [ 1.911680] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 1.911682] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
    [ 1.911685] pci 0000:00:01.0: bridge window [mem 0xc4400000-0xc44fffff]
    [ 1.911687] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
    [ 1.911691] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 1.911694] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
    [ 1.911699] pci 0000:00:1c.0: bridge window [mem 0xc3400000-0xc43fffff]
    [ 1.911704] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
    [ 1.911711] pci 0000:03:00.0: BAR 6: assigned [mem 0xc1410000-0xc141ffff pref]
    [ 1.911713] pci 0000:00:1c.1: PCI bridge to [bus 03]
    [ 1.911716] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
    [ 1.911721] pci 0000:00:1c.1: bridge window [mem 0xc2400000-0xc33fffff]
    [ 1.911726] pci 0000:00:1c.1: bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
    [ 1.911733] pci 0000:00:1e.0: PCI bridge to [bus 04]
    [ 1.911747] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 1.911749] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 1.911750] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 1.911752] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfeafffff]
    [ 1.911753] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
    [ 1.911755] pci_bus 0000:01: resource 1 [mem 0xc4400000-0xc44fffff]
    [ 1.911756] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
    [ 1.911758] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
    [ 1.911760] pci_bus 0000:02: resource 1 [mem 0xc3400000-0xc43fffff]
    [ 1.911761] pci_bus 0000:02: resource 2 [mem 0xc0400000-0xc13fffff 64bit pref]
    [ 1.911763] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
    [ 1.911764] pci_bus 0000:03: resource 1 [mem 0xc2400000-0xc33fffff]
    [ 1.911766] pci_bus 0000:03: resource 2 [mem 0xc1400000-0xc23fffff 64bit pref]
    [ 1.911767] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
    [ 1.911769] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
    [ 1.911770] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
    [ 1.911772] pci_bus 0000:04: resource 7 [mem 0xa0000000-0xfeafffff]
    [ 1.911805] NET: Registered protocol family 2
    [ 1.912015] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 1.912263] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 1.912459] TCP: Hash tables configured (established 65536 bind 65536)
    [ 1.912493] TCP: reno registered
    [ 1.912506] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 1.912542] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 1.912641] NET: Registered protocol family 1
    [ 1.912657] pci 0000:00:02.0: Boot video device
    [ 1.938251] PCI: CLS 64 bytes, default 64
    [ 1.938297] Unpacking initramfs...
    [ 1.987010] Freeing initrd memory: 2960K (ffff880037a28000 - ffff880037d0c000)
    [ 1.987017] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 1.987019] software IO TLB [mem 0x9763f000-0x9b63f000] (64MB) mapped at [ffff88009763f000-ffff88009b63efff]
    [ 1.987050] Simple Boot Flag at 0x44 set to 0x1
    [ 1.987234] Scanning for low memory corruption every 60 seconds
    [ 1.987523] audit: initializing netlink socket (disabled)
    [ 1.987536] type=2000 audit(1390630458.423:1): initialized
    [ 1.998005] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 1.999257] zbud: loaded
    [ 1.999421] VFS: Disk quotas dquot_6.5.2
    [ 1.999457] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 1.999614] msgmni has been set to 15569
    [ 1.999955] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 2.000004] io scheduler noop registered
    [ 2.000006] io scheduler deadline registered
    [ 2.000029] io scheduler cfq registered (default)
    [ 2.000219] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 2.000474] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 2.000487] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 2.000526] vesafb: mode is 1600x900x32, linelength=6400, pages=0
    [ 2.000528] vesafb: scrolling: redraw
    [ 2.000529] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 2.000872] vesafb: framebuffer at 0xb0000000, mapped to 0xffffc90008f00000, using 5632k, total 5632k
    [ 2.208493] Console: switching to colour frame buffer device 200x56
    [ 2.415572] fb0: VESA VGA frame buffer device
    [ 2.415583] intel_idle: MWAIT substates: 0x1120
    [ 2.415585] intel_idle: v0.4 model 0x25
    [ 2.415585] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 2.415721] GHES: HEST is not enabled!
    [ 2.415778] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 2.416220] Linux agpgart interface v0.103
    [ 2.416282] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 2.437802] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 2.437825] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 2.437928] mousedev: PS/2 mouse device common for all mice
    [ 2.439572] rtc_cmos 00:05: RTC can wake from S4
    [ 2.439720] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    [ 2.439752] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 2.439804] drop_monitor: Initializing network drop monitor service
    [ 2.439867] TCP: cubic registered
    [ 2.439942] NET: Registered protocol family 10
    [ 2.440100] NET: Registered protocol family 17
    [ 2.440110] Key type dns_resolver registered
    [ 2.440362] registered taskstats version 1
    [ 2.441127] Magic number: 14:648:216
    [ 2.441252] rtc_cmos 00:05: setting system clock to 2014-01-25 06:14:19 UTC (1390630459)
    [ 2.441297] PM: Hibernation image not present or could not be loaded.
    [ 2.442333] Freeing unused kernel memory: 1144K (ffffffff818cb000 - ffffffff819e9000)
    [ 2.442335] Write protecting the kernel read-only data: 8192k
    [ 2.444650] Freeing unused kernel memory: 1016K (ffff880001502000 - ffff880001600000)
    [ 2.445600] Freeing unused kernel memory: 420K (ffff880001797000 - ffff880001800000)
    [ 2.458198] systemd-udevd[57]: starting version 208
    [ 2.466960] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 2.485606] SCSI subsystem initialized
    [ 2.487357] ACPI: bus type USB registered
    [ 2.487410] usbcore: registered new interface driver usbfs
    [ 2.487487] libata version 3.00 loaded.
    [ 2.487522] usbcore: registered new interface driver hub
    [ 2.487576] usbcore: registered new device driver usb
    [ 2.488154] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 2.488305] ehci-pci: EHCI PCI platform driver
    [ 2.488453] ehci-pci 0000:00:1a.0: setting latency timer to 64
    [ 2.488473] ehci-pci 0000:00:1a.0: EHCI Host Controller
    [ 2.488484] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 2.488507] ehci-pci 0000:00:1a.0: debug port 2
    [ 2.492709] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
    [ 2.492734] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc450a000
    [ 2.501178] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 2.501456] hub 1-0:1.0: USB hub found
    [ 2.501468] hub 1-0:1.0: 3 ports detected
    [ 2.501772] ehci-pci 0000:00:1d.0: setting latency timer to 64
    [ 2.501779] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 2.501786] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 2.501801] ehci-pci 0000:00:1d.0: debug port 2
    [ 2.505713] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 2.505733] ehci-pci 0000:00:1d.0: irq 21, io mem 0xc4509000
    [ 2.514513] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 2.514735] hub 2-0:1.0: USB hub found
    [ 2.514741] hub 2-0:1.0: 3 ports detected
    [ 2.514993] ahci 0000:00:1f.2: version 3.0
    [ 2.515120] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
    [ 2.515225] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
    [ 2.515229] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems sxs apst
    [ 2.515236] ahci 0000:00:1f.2: setting latency timer to 64
    [ 2.535192] scsi0 : ahci
    [ 2.535558] scsi1 : ahci
    [ 2.535764] scsi2 : ahci
    [ 2.535955] scsi3 : ahci
    [ 2.536149] scsi4 : ahci
    [ 2.536359] scsi5 : ahci
    [ 2.536451] ata1: SATA max UDMA/133 abar m2048@0xc4508000 port 0xc4508100 irq 41
    [ 2.536457] ata2: SATA max UDMA/133 abar m2048@0xc4508000 port 0xc4508180 irq 41
    [ 2.536459] ata3: DUMMY
    [ 2.536462] ata4: DUMMY
    [ 2.536467] ata5: SATA max UDMA/133 abar m2048@0xc4508000 port 0xc4508300 irq 41
    [ 2.536471] ata6: SATA max UDMA/133 abar m2048@0xc4508000 port 0xc4508380 irq 41
    [ 2.807839] usb 1-1: new high-speed USB device number 2 using ehci-pci
    [ 2.854462] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 2.854564] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 2.854611] ata6: SATA link down (SStatus 0 SControl 300)
    [ 2.854735] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 2.856919] ata2.00: ATAPI: hp BD-ROM BC-5501H, 2.90, max UDMA/100
    [ 2.859217] ata2.00: configured for UDMA/100
    [ 2.861881] ata1.00: ATA-8: Corsair CSSD-F60GB2, 2.0, max UDMA/133
    [ 2.861886] ata1.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 2.871886] ata1.00: configured for UDMA/133
    [ 2.872196] scsi 0:0:0:0: Direct-Access ATA Corsair CSSD-F60 2.0 PQ: 0 ANSI: 5
    [ 2.873244] scsi 1:0:0:0: CD-ROM hp BD ROM BC-5501H 2.90 PQ: 0 ANSI: 5
    [ 2.903929] ata5.00: ATA-8: TOSHIBA MK5075GSX, GT001U, max UDMA/100
    [ 2.903933] ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 2.905148] ata5.00: configured for UDMA/100
    [ 2.905285] scsi 4:0:0:0: Direct-Access ATA TOSHIBA MK5075GS GT00 PQ: 0 ANSI: 5
    [ 2.909966] sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
    [ 2.910041] sd 0:0:0:0: [sda] Write Protect is off
    [ 2.910048] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.910091] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.910499] sd 4:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    [ 2.910501] sd 4:0:0:0: [sdb] 4096-byte physical blocks
    [ 2.910526] sd 4:0:0:0: [sdb] Write Protect is off
    [ 2.910528] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [ 2.910540] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.910633] sda: sda1 sda2 sda3 sda4
    [ 2.911010] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 2.911016] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 2.911095] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 2.911204] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [ 2.932118] hub 1-1:1.0: USB hub found
    [ 2.932226] hub 1-1:1.0: 6 ports detected
    [ 2.953159] sdb: sdb1 sdb3
    [ 2.953757] sd 4:0:0:0: [sdb] Attached SCSI disk
    [ 2.987624] tsc: Refined TSC clocksource calibration: 2527.285 MHz
    [ 3.037677] usb 2-1: new high-speed USB device number 2 using ehci-pci
    [ 3.161529] hub 2-1:1.0: USB hub found
    [ 3.161615] hub 2-1:1.0: 8 ports detected
    [ 3.241106] usb 1-1.2: new low-speed USB device number 3 using ehci-pci
    [ 3.333324] hidraw: raw HID events driver (C) Jiri Kosina
    [ 3.336248] usbcore: registered new interface driver usbhid
    [ 3.336250] usbhid: USB HID core driver
    [ 3.336850] input: Microsoft Microsoft Basic Optical Mouse v2.0 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input2
    [ 3.337086] hid-generic 0003:045E:00CB.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse v2.0 ] on usb-0000:00:1a.0-1.2/input0
    [ 3.397519] usb 1-1.6: new full-speed USB device number 4 using ehci-pci
    [ 3.486816] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
    [ 3.546180] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
    [ 3.548701] systemd[1]: Set hostname to <HP-DV7>.
    [ 3.553751] systemd-fstab-generator[119]: Mount point swap is not a valid path, ignoring.
    [ 3.564291] usb 2-1.1: new high-speed USB device number 3 using ehci-pci
    [ 3.601149] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
    [ 3.601160] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
    [ 3.601361] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 3.601419] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 3.601433] systemd[1]: Starting Remote File Systems.
    [ 3.602633] systemd[1]: Reached target Remote File Systems.
    [ 3.602645] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 3.604045] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 3.604055] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 3.605524] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 3.605534] systemd[1]: Starting Delayed Shutdown Socket.
    [ 3.606751] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 3.606760] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 3.608067] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 3.608103] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 3.610164] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 3.610180] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 3.610209] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 3.610218] systemd[1]: Starting Paths.
    [ 3.611135] systemd[1]: Reached target Paths.
    [ 3.611150] systemd[1]: Starting udev Kernel Socket.
    [ 3.612271] systemd[1]: Listening on udev Kernel Socket.
    [ 3.612284] systemd[1]: Starting udev Control Socket.
    [ 3.613423] systemd[1]: Listening on udev Control Socket.
    [ 3.613435] systemd[1]: Starting Journal Socket.
    [ 3.614518] systemd[1]: Listening on Journal Socket.
    [ 3.614535] systemd[1]: Starting udev Coldplug all Devices...
    [ 3.616439] systemd[1]: Starting Apply Kernel Variables...
    [ 3.617780] systemd[1]: Mounting Huge Pages File System...
    [ 3.619103] systemd[1]: Mounting POSIX Message Queue File System...
    [ 3.622065] systemd[1]: Starting Load Kernel Modules...
    [ 3.626618] systemd[1]: Starting Create list of required static device nodes for the current kernel...
    [ 3.629265] systemd[1]: Starting Set Up Additional Binary Formats...
    [ 3.630812] systemd[1]: Starting Journal Service...
    [ 3.633257] systemd[1]: Started Journal Service.
    [ 3.643151] systemd-journald[134]: Vacuuming done, freed 0 bytes
    [ 3.643416] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
    [ 3.643422] ACPI: Power Button [PWRB]
    [ 3.643483] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
    [ 3.643552] EXT4-fs (sda4): re-mounted. Opts: discard
    [ 3.643855] ACPI: Lid Switch [LID0]
    [ 3.643927] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
    [ 3.643930] ACPI: Power Button [PWRF]
    [ 3.644676] AMD IOMMUv2 driver by Joerg Roedel <[email protected]>
    [ 3.644679] AMD IOMMUv2 functionality not available on this system
    [ 3.705533] systemd-udevd[157]: starting version 208
    [ 3.714133] usb 2-1.3: new full-speed USB device number 4 using ehci-pci
    [ 3.723418] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
    [ 3.723419] Disabling lock debugging due to kernel taint
    [ 3.734452] <6>[fglrx] Maximum main memory to use for locked dma buffers: 7558 MBytes.
    [ 3.734648] <6>[fglrx] vendor: 1002 device: 68c1 count: 1
    [ 3.734918] <6>[fglrx] ioport: bar 4, base 0x4000, size: 0x100
    [ 3.734926] pci 0000:01:00.0: enabling device (0000 -> 0003)
    [ 3.735095] <6>[fglrx] Kernel PAT support is enabled
    [ 3.735114] <6>[fglrx] module loaded - fglrx 13.25.5 [Dec 6 2013] with 1 minors
    [ 3.783368] ACPI: Requesting acpi_cpufreq
    [ 3.784868] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 3.785719] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
    [ 3.785798] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
    [ 3.786504] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
    [ 3.786902] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
    [ 3.787185] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130725/utaddress-251)
    [ 3.787188] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 3.787192] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
    [ 3.787195] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \SGGP 2 (20130725/utaddress-251)
    [ 3.787198] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \_SB_.PCI0.P0P3.PEGP.GPIO 3 (20130725/utaddress-251)
    [ 3.787198] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 3.787200] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
    [ 3.787203] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \SGGP 2 (20130725/utaddress-251)
    [ 3.787205] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.P0P3.PEGP.GPIO 3 (20130725/utaddress-251)
    [ 3.787206] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 3.787208] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
    [ 3.787210] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \SGGP 2 (20130725/utaddress-251)
    [ 3.787213] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.P0P3.PEGP.GPIO 3 (20130725/utaddress-251)
    [ 3.787213] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 3.787214] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 3.788226] mei_me 0000:00:16.0: setting latency timer to 64
    [ 3.788279] mei_me 0000:00:16.0: irq 42 for MSI/MSI-X
    [ 3.803478] hp_accel: hardware type DV7 found
    [ 3.804108] lis3lv02d: 8 bits sensor found
    [ 3.806403] [drm] Initialized drm 1.1.0 20060810
    [ 3.817825] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
    [ 3.820698] usb-storage 2-1.1:1.0: USB Mass Storage device detected
    [ 3.821478] scsi6 : usb-storage 2-1.1:1.0
    [ 3.822190] usbcore: registered new interface driver usb-storage
    [ 3.836293] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
    [ 3.840807] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input7
    [ 3.842785] [Firmware Bug]: Invalid critical threshold (0)
    [ 3.848265] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 3.848278] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 3.848284] pcieport 0000:00:1c.1: driver skip pci_set_master, fix it!
    [ 3.848512] r8169 0000:03:00.0: irq 44 for MSI/MSI-X
    [ 3.848684] r8169 0000:03:00.0 eth0: RTL8168d/8111d at 0xffffc90000c4e000, 78:ac:c0:41:2a:dc, XID 083000c0 IRQ 44
    [ 3.848685] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    [ 3.848994] thermal LNXTHERM:00: registered as thermal_zone0
    [ 3.848996] ACPI: Thermal Zone [TZ01] (60 C)
    [ 3.854926] input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
    [ 3.855035] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
    [ 3.855410] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
    [ 3.855479] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
    [ 3.856762] [drm] Memory usable by graphics device = 2048M
    [ 3.856877] checking generic (b0000000 580000) vs hw (b0000000 10000000)
    [ 3.856906] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
    [ 3.861908] cfg80211: Calling CRDA to update world regulatory domain
    [ 3.867315] usb 2-1.5: new high-speed USB device number 5 using ehci-pci
    [ 3.872505] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
    [ 3.873734] Intel(R) Wireless WiFi driver for Linux, in-tree:
    [ 3.873734] Copyright(c) 2003-2013 Intel Corporation
    [ 3.873811] pcieport 0000:00:1c.0: driver skip pci_set_master, fix it!
    [ 3.875297] iwlwifi 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 3.875446] iwlwifi 0000:02:00.0: irq 46 for MSI/MSI-X
    [ 3.879450] iwlwifi 0000:02:00.0: loaded firmware version 39.31.5.1 build 35138 op_mode iwldvm
    [ 3.879788] Bluetooth: Core ver 2.16
    [ 3.881003] NET: Registered protocol family 31
    [ 3.881005] Bluetooth: HCI device and connection manager initialized
    [ 3.881016] Bluetooth: HCI socket layer initialized
    [ 3.881019] Bluetooth: L2CAP socket layer initialized
    [ 3.881026] Bluetooth: SCO socket layer initialized
    [ 3.883938] usbcore: registered new interface driver btusb
    [ 3.884347] Console: switching to colour dummy device 80x25
    [ 3.886414] i915 0000:00:02.0: setting latency timer to 64
    [ 3.892348] ACPI: AC Adapter [ACAD] (on-line)
    [ 3.906181] systemd-journald[134]: Received request to flush runtime journal from PID 1
    [ 3.910134] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
    [ 3.910140] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
    [ 3.910142] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
    [ 3.910145] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C
    [ 3.910257] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 3.930630] i915 0000:00:02.0: irq 47 for MSI/MSI-X
    [ 3.930654] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 3.930656] [drm] Driver supports precise vblank timestamp query.
    [ 3.931084] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=none
    [ 3.934147] input: PC Speaker as /devices/platform/pcspkr/input/input11
    [ 3.936986] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
    [ 3.950834] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2
    [ 3.966690] fbcon: inteldrmfb (fb0) is primary device
    [ 3.987780] Switched to clocksource tsc
    [ 3.996141] iTCO_vendor_support: vendor-support=0
    [ 3.996902] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
    [ 3.996972] iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0460)
    [ 3.997186] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 4.022206] systemd-udevd[171]: renamed network interface eth0 to enp3s0
    [ 4.023553] cfg80211: World regulatory domain updated:
    [ 4.023554] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [ 4.023555] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    [ 4.023556] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    [ 4.023557] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
    [ 4.023558] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
    [ 4.023558] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
    [ 4.023559] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
    [ 4.080995] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x2
    [ 4.098822] microcode: CPU2 sig=0x20655, pf=0x10, revision=0x2
    [ 4.099319] microcode: CPU3 sig=0x20655, pf=0x10, revision=0x2
    [ 4.099803] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 4.100209] ACPI: Battery Slot [BAT0] (battery present)
    [ 4.100361] wmi: Mapper loaded
    [ 4.103136] input: HP WMI hotkeys as /devices/virtual/input/input13
    [ 4.104748] systemd-udevd[164]: renamed network interface wlan0 to wlo1
    [ 4.125347] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
    [ 4.240631] media: Linux media interface: v0.10
    [ 4.244154] Linux video capture interface: v2.00
    [ 4.252000] uvcvideo: Found UVC 1.00 device HP Webcam (064e:f209)
    [ 4.257341] input: HP Webcam as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input14
    [ 4.257488] usbcore: registered new interface driver uvcvideo
    [ 4.257489] USB Video Class driver (1.1.1)
    [ 4.770357] Console: switching to colour frame buffer device 200x56
    [ 4.778627] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    [ 4.778629] i915 0000:00:02.0: registered panic notifier
    [ 4.785739] acpi device:02: registered as cooling_device5
    [ 4.785956] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 4.786022] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input15
    [ 4.797354] acpi device:14: registered as cooling_device6
    [ 4.802976] acpi device:15: registered as cooling_device7
    [ 4.803025] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
    [ 4.803087] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:11/LNXVIDEO:02/input/input16
    [ 4.803440] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 4.803977] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
    [ 4.805256] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
    [ 4.805400] ACPI Warning: 0x0000000000005000-0x000000000000501f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130725/utaddress-251)
    [ 4.805408] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 4.824848] scsi 6:0:0:0: Direct-Access SanDisk Cruzer Glide 1.26 PQ: 0 ANSI: 5
    [ 4.827187] sd 6:0:0:0: [sdc] 31266816 512-byte logical blocks: (16.0 GB/14.9 GiB)
    [ 4.828646] sd 6:0:0:0: [sdc] Write Protect is off
    [ 4.828651] sd 6:0:0:0: [sdc] Mode Sense: 43 00 00 00
    [ 4.830784] sd 6:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
    [ 4.839857] sdc: sdc1
    [ 4.843514] sd 6:0:0:0: [sdc] Attached SCSI removable disk
    [ 4.894625] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 4.902120] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3
    [ 4.937012] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 4.944514] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3
    [ 4.978524] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
    [ 5.038118] r8169 0000:03:00.0 enp3s0: link down
    [ 5.038174] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
    [ 5.376682] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xe40000/0x5a0400, board id: 3655, fw id: 631163
    [ 5.470179] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input12
    [ 5.851763] wlo1: authenticate with 04:a1:51:18:3f:5a
    [ 5.865752] wlo1: send auth to 04:a1:51:18:3f:5a (try 1/3)
    [ 5.868512] wlo1: authenticated
    [ 5.869715] wlo1: associate with 04:a1:51:18:3f:5a (try 1/3)
    [ 5.873551] wlo1: RX AssocResp from 04:a1:51:18:3f:5a (capab=0x411 status=0 aid=2)
    [ 5.876272] wlo1: associated
    [ 5.876327] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
    [ 38.341494] fuse init (API version 7.22)
    Xorg.0.log
    [ 20.932]
    X.Org X Server 1.14.5
    Release Date: 2013-12-12
    [ 20.932] X Protocol Version 11, Revision 0
    [ 20.932] Build Operating System: Linux 3.12.6-1-ARCH x86_64
    [ 20.932] Current Operating System: Linux HP-DV7 3.12.8-1-ARCH #1 SMP PREEMPT Thu Jan 16 09:16:34 CET 2014 x86_64
    [ 20.932] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a303086c-e564-4347-92f1-8ec5ecbdcf85 rw
    [ 20.932] Build Date: 08 January 2014 01:35:51PM
    [ 20.932]
    [ 20.932] Current version of pixman: 0.32.4
    [ 20.932] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 20.932] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 20.932] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 25 01:16:07 2014
    [ 20.935] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 20.938] (==) No Layout section. Using the first Screen section.
    [ 20.938] (==) No screen section available. Using defaults.
    [ 20.938] (**) |-->Screen "Default Screen Section" (0)
    [ 20.938] (**) | |-->Monitor "<default monitor>"
    [ 20.938] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
    [ 20.938] (**) | |-->Device "Intel Graphics"
    [ 20.938] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 20.938] (==) Automatically adding devices
    [ 20.938] (==) Automatically enabling devices
    [ 20.938] (==) Automatically adding GPU devices
    [ 20.947] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 20.947] (**) ModulePath set to "/usr/lib/xorg/modules/updates,/usr/lib/xorg/modules"
    [ 20.947] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 20.947] (II) Loader magic: 0x7fac20
    [ 20.947] (II) Module ABI versions:
    [ 20.947] X.Org ANSI C Emulation: 0.4
    [ 20.947] X.Org Video Driver: 14.1
    [ 20.947] X.Org XInput driver : 19.1
    [ 20.947] X.Org Server Extension : 7.0
    [ 20.947] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 20.948] (--) PCI:*(0:0:2:0) 8086:0046:103c:144b rev 2, Mem @ 0xc0000000/4194304, 0xb0000000/268435456, I/O @ 0x00005050/8
    [ 20.949] (--) PCI: (0:1:0:0) 1002:68c1:103c:144b rev 0, Mem @ 0xa0000000/268435456, 0xc4400000/131072, I/O @ 0x00004000/256, BIOS @ 0x????????/131072
    [ 20.949] Initializing built-in extension Generic Event Extension
    [ 20.949] Initializing built-in extension SHAPE
    [ 20.949] Initializing built-in extension MIT-SHM
    [ 20.949] Initializing built-in extension XInputExtension
    [ 20.949] Initializing built-in extension XTEST
    [ 20.949] Initializing built-in extension BIG-REQUESTS
    [ 20.949] Initializing built-in extension SYNC
    [ 20.949] Initializing built-in extension XKEYBOARD
    [ 20.949] Initializing built-in extension XC-MISC
    [ 20.949] Initializing built-in extension SECURITY
    [ 20.949] Initializing built-in extension XINERAMA
    [ 20.949] Initializing built-in extension XFIXES
    [ 20.949] Initializing built-in extension RENDER
    [ 20.949] Initializing built-in extension RANDR
    [ 20.949] Initializing built-in extension COMPOSITE
    [ 20.949] Initializing built-in extension DAMAGE
    [ 20.949] Initializing built-in extension MIT-SCREEN-SAVER
    [ 20.950] Initializing built-in extension DOUBLE-BUFFER
    [ 20.950] Initializing built-in extension RECORD
    [ 20.950] Initializing built-in extension DPMS
    [ 20.950] Initializing built-in extension X-Resource
    [ 20.950] Initializing built-in extension XVideo
    [ 20.950] Initializing built-in extension XVideo-MotionCompensation
    [ 20.950] Initializing built-in extension XFree86-VidModeExtension
    [ 20.950] Initializing built-in extension XFree86-DGA
    [ 20.950] Initializing built-in extension XFree86-DRI
    [ 20.950] Initializing built-in extension DRI2
    [ 20.950] (II) LoadModule: "glx"
    [ 20.951] (II) Loading /usr/lib/xorg/modules/updates/extensions/libglx.so
    [ 20.954] (II) Module glx: vendor="Advanced Micro Devices, Inc."
    [ 20.954] compiled for 6.9.0, module version = 1.0.0
    [ 20.954] Loading extension GLX
    [ 20.954] (II) LoadModule: "intel"
    [ 20.955] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 20.959] (II) Module intel: vendor="X.Org Foundation"
    [ 20.959] compiled for 1.14.2, module version = 2.21.15
    [ 20.959] Module class: X.Org Video Driver
    [ 20.959] ABI class: X.Org Video Driver, version 14.1
    [ 20.959] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
    i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
    915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
    Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
    GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
    HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
    HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
    HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
    HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
    [ 20.960] (++) using VT number 1
    [ 20.963] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 20.963] (==) intel(0): Depth 24, (--) framebuffer bpp 32
    [ 20.963] (==) intel(0): RGB weight 888
    [ 20.963] (==) intel(0): Default visual is TrueColor
    [ 20.963] (**) intel(0): Option "AccelMethod" "sna"
    [ 20.964] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics
    [ 20.964] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2
    [ 20.964] (**) intel(0): Framebuffer tiled
    [ 20.964] (**) intel(0): Pixmaps tiled
    [ 20.964] (**) intel(0): "Tear free" disabled
    [ 20.964] (**) intel(0): Forcing per-crtc-pixmaps? no
    [ 20.964] (II) intel(0): Output LVDS1 has no monitor section
    [ 20.965] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
    [ 20.965] (II) intel(0): Output VGA1 has no monitor section
    [ 20.965] (--) intel(0): Output LVDS1 using initial mode 1600x900 on pipe 0
    [ 20.965] (==) intel(0): DPI set to (96, 96)
    [ 20.965] (II) Loading sub module "dri2"
    [ 20.965] (II) LoadModule: "dri2"
    [ 20.965] (II) Module "dri2" already built-in
    [ 20.965] (==) Depth 24 pixmap format is 32 bpp
    [ 20.969] (II) intel(0): SNA initialized with Ironlake (gen5) backend
    [ 20.969] (==) intel(0): Backing store disabled
    [ 20.969] (==) intel(0): Silken mouse enabled
    [ 20.969] (II) intel(0): HW Cursor enabled
    [ 20.969] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 20.972] (==) intel(0): DPMS enabled
    [ 20.972] (II) intel(0): [XvMC] xvmc_vld driver initialized.
    [ 20.972] (II) intel(0): [DRI2] Setup complete
    [ 20.972] (II) intel(0): [DRI2] DRI driver: i965
    [ 20.972] (II) intel(0): direct rendering: DRI2 Enabled
    [ 20.972] (==) intel(0): hotplug detection: "enabled"
    [ 20.972] (--) RandR disabled
    [ 20.984] (EE) GLX error: Can not get required symbols.
    [ 20.996] (II) intel(0): switch to mode [email protected] on pipe 0 using LVDS1, position (0, 0), rotation normal
    [ 21.006] (II) intel(0): Setting screen physical size to 423 x 238
    [ 21.139] (II) config/udev: Adding input device Power Button (/dev/input/event4)
    [ 21.139] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 21.139] (II) LoadModule: "evdev"
    [ 21.140] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 21.141] (II) Module evdev: vendor="X.Org Foundation"
    [ 21.141] compiled for 1.14.3, module version = 2.8.2
    [ 21.141] Module class: X.Org XInput Driver
    [ 21.141] ABI class: X.Org XInput driver, version 19.1
    [ 21.141] (II) Using input driver 'evdev' for 'Power Button'
    [ 21.141] (**) Po

  • Windows 8 Consumer Preview: AMD Switchable Graphics - Unswitchable

    Hello everyone,
    I have a HP Pavillion dv6-6004tx notebook computer, and I recently upgraded it to the Windows 8 Consumer Preview (Build 8250). I would like some troubleshooting from those who have/are experiencing this and may have found a way around it.
    As far as the specs of my computer goes:
    Intel Core i7-2720QM
    6 GB DDR3 RAM
    64-Bit OS
    AMD Radeon HD 6700M
    Intel Graphics Family
    The problem lies within my display drivers. Some of you may also have a Switchable Graphics feature installed in your computers. But for those who don't, basically what it is is a feature that allows one to switch their display adaptor from a Power-Saving GPU to a High-Performance GPU, and vice versa. 
    In my case, as you can see above, the High-Performance GPU is the Radeon 6700M, while the Power-saving GPU is the integrated Intel one. My problem deals with not being able to switch back and forth between them, like I was able to back on Windows 7. As this is a feature of AMD Catalyst Control Center, I have searched their website and they actually have a supported driver version for Windows 8 CP, albeit it still being a beta and sometimes glitchy. 
    http://support.amd.com/us/kbarticles/Pages/Windows8ConsumerPreviewDrivers.aspx
    (As you can see, my model: AMD Radeon HD 6000M Series is listed)
    After installing the Control Center, I restarted and a pop-up notifcation tells me that:
    "The Catalyst Control Center is not supported by the driver version of your enabled graphics adapter. Please update your AMD graphics driver, or enable your AMD adapter using the Displays Manager."
    I found this odd at first, as my model clearly was listed. But after some inferencing, I realized that my computer must be running on the integrated Intel graphics by default. This was further reinforced when I tried playing some games and other applications (It would be slightly choppy - as experienced before when I had forgotten to switch back onto High-Performance GPU).
    The AMD Radeon card used to have an error (The device won't start. Code: 10) under device manager, but with a fresh install of the driver obtained from AMD, it seems to be working fine. However, my computer is still using the Intel card by default, and I have no way of switching to the other GPU as Catalyst will not start. 
    Has anyone found a way around this? 
    This question was solved.
    View Solution.

    I'll give you a two way to make it work!!!!  There is so much incompatibilities with the FIRST METHOD listed, you won't get use a Intel (less power consuming card) GPU to work after the changes! you've got to wait till HP let's it work properly or deal with power hungry AMD GPU even in battery mode .
    THE SECOND METHOD listed works without any problem with compatibility in any apps BUT IT IS Require pace and order ( may be exhaustive  for newbie's, no worries listed below got all the info you need to make it work)
    SO the first option:
    NOTE:THIS WILL TRIGER THE OUTCONTROL EVENTS SO PRECAUTION METHODS I WILL ADVISE FURTHER AS WE GO STEP BY STEP _ DOWNLOAD CHROME IF YOU RUNNING INTERNET EXPLORER ( GRAPHIC CARD WILL WORK WITH GAMES BUT NOT WITH METRO APPS THEY WILL NOT CRASH JUST NOT LAUNCH
    ALL THE METHODS BELOW TESTED BY MYSELF AND GET WORKED YET MANY INCOMPATIBILIES STILL WILL REMAIN USE IT ON YOUR OWN RISK! 
    as i can tell all the games working properly yet battlefield 3 won't launch
    1.      AT first make sure that windows UPDATE IS SWITCH OFF or let you choose to download and instal (not automaticly or it will update ur device (at device manager) without ur permision and all eforts are gone!
    2.uninstall AMD Catalyst from "program and components" at control panel, then uninstal all the devices Intel and AMD at device manager at the control panel  (check unistal driver at intel HD driver)
    3.reboot! after reboot download this http://www2.ati.com/drivers/hotfix/win8/amd_catalyst_win8_consumer_preview_[rc10].exe
    and this
    ftp://ftp.hp.com/pub/softpaq/sp53001-53500/sp53025.exe       -      300mb 
    4. instal sp53025.exe at windows 7 compatibility mode (it'll unpack by default in C:/SWsetup) 
    then start the istalation make sure u choose a "custom" , THIS IS CRUCIAL - uncheck the CATALYST (check all the rest intell driver amd driver ect.) after the instalation do not reboot 
    5.      Next start the instalation of the windows 8 consumer preview driver from AMD.
    uncheck all the rest ( after the sp53025 there will be only AMD driver (check/uncheck) and the catalyst (check/uncheck) box available) uncheck the AMD driver and install only the CATALYST driver!!!!
    Reboot! Enjoy !!! There will be no CATALYST(only the intel preference and settings where the CATALYST should've be) at the right mouse click but switchable graphic is now awailable LIKE THIS
    Unfortunately you'll won't be available to choose between the INTEL and AMD ! AMD is now working by default
    All the .exe will now recognize 6770m
    AND METRO APPS WON"T WORK!!!!!!! AS internet explorer will crash as you'll open it 
    SECOND METHOD IF THE FIRST FAILS (WHICH IS IMPOSSIBLE IF HANDS ARE STRAIGHT MORE OR LESS)
    FURTHER IS TESTED!
    THIS METHOD EXCLUDE THE METRO APPS CRASH AND ALL THE REST INCOMPATIBILITIES WITH EVERY EXECUTABLE PROGRAMS AND GAMES!!!!
    Note: Requires knowledge to sign your own drivers, disable signing enforcement at boot and modding some inf files.
    I am not responsible for any damage that may arise. This guide is not exhaustive.
    Requirements:
    .NET Framework 3.5 -- Can be enabled within Windows 8, in "Turn Windows features on or off"
    Windows Driver Kit (WDK) -- Can be downloaded from here
    Configure Windows Update to only "Download updates but let me choose wether to install them", and hide both Intel and AMD updates. This is to prevent our driver be updated by Windows.
    1.Download the latest switchable graphics drivers from this site: leshcat blog IT Tips & Tricks: Catalyst 12.3 Pre-WHQL UnifL for Switchable Graphics
    2. Run the installer that will extract the contents of the file, by default it will ask you to disable "Signing enforcement of Windows", you will know that it is working after rebooting because a "Test Mode" watermark is added to the desktop, above "Windows 8 Consumer Preview".
    3. At this moment, do not run the AMD installer yet. We need to modify some files. By default, the driver will be extracted to "C:\Drivers\Catalyst 12.3 Pre-WHQL UnifL". 
    4. Go to this directory, and open the following file "Packages\Drivers\Display\W76A_INF\C7133662.inf"
    Do the following changes:
    In the section [Version] add:
    Code:
    [Version]
    CatalogFile=C7133662.CAT
    There is a section that has the listing of all the supported cards. Rename it from "[ATI.Mfg.NTamd64.6.1]" to "[ATI.Mfg.NTamd64.6.2]"
    It should look like this:
    Code:
    [Manufacturer]
    %ATI% = ATI.Mfg, NTamd64.6.1, NTamd64.6.2
    [ATI.Mfg.NTamd64.6.2]
    "%AMD68F2.1%" = ati2mtag_VancouverC_PXAI, PCI\VEN_1002&DEV_68F2
    "%AMD9519.1%" = ati2mtag_VancouverC_PXAI, PCI\VEN_1002&DEV_9519
    5. Follow this guide to Test-Sign a Driver Package. (This guide is generic)
    6. After the previous step, you should have a Catalog file and the inf file we modified previously.
    7. Now proceed to run the AMD installer in "Win 7" Compatibility Mode. It is most likely that the driver install will fail at this stage, but the rest of Catalyst software will be installed.
    8. Now install the driver using the "Have disk" method in device manager and your modified INF for both Intel and AMD cards.
    9.If you did the test-signing process correctly, the installation will succeed for both cards.
    10. Reboot and enjoy your switchable graphics under Win 8.
    I still have to figure out how to make brightness controls to work.
    BTW sorry for any grammar mistake, I am not a native English speaker.
    Known issues:
    - Sometimes switching may not work, resulting in BSOD.
    - When AMD gpu is active, Intel driver context menu options are still available.
    Features:
    AMD gpu can be turned off, so battery will last longer.

  • Windows 8 Pro Upgrade Problems (Switchable Graphics, Screen Brightness Adjustment, etc.)

    Hi guys! I hope you can help me with this.
    My laptop is a Lenovo U400 bought last April. I upgraded it yesterday to Windows 8 Pro.
    The Upgrade Assistant detected incompatibilities on the following softwares (I'll be mentioning only those I had problems with after the update.)
    -AMD Catalyst Install Manager
    -Catalyst Control Center
    -Lenovo Energy Management
    -Cypress Trackpad
    After the update, the following problems occurred
    -Windows kept prompting me about the incompatibility of Catalyst Control Center and Lenovo Energy Management
    -When I check the Device Manager -->Display Adapters, My AMD Radeon HD 6470M was changed to HD 7400M and has an exclamation point on it indicating a problem. When check Properties it says, "Windows has stopped this device because it has reported problems. (Code 43)"
    -I can't manage switchable graphics because the AMD Radeon driver has been stopped by the OS and Catalyst Control Center doesn't work. It says, "Catalyst Control Center cannot be started. There are currently no settings that can be configured using Catalyst Control Center."
    -My touchpad works but does not support multitouch functions.
    -Screen brightness adjustment stopped working both on hotkeys and Power Options.
    I tried the following actions to fix the problems:
    -Downloaded the new softwares from Lenovo Support but the Catalyst Control Center and Cypress Trackpad still doesn't work. I also tried installing driver software from the AMD site but it still didn't work. [FAILED]
    -I tried to use the Cypress Trackpad software for U300s/e and it fixed the problem with the touchpad [FIXED]
    -Installed the Energy Management software for Windows 8 but when I click the 'Optimized Battery Health' button, it keeps reverting back to 'Maximum Battery Life'. [PARTIALLY FIXED]
    -Resorted to 3rd party software to fix the Switchable Graphics (Catalyst 12.11 Beta from leshcatlabs.net) and it fixed the switchable graphics problem as well as the Catalyst Control Center problem. This is temporary until a working solution or update is available. [TEMPORARILY FIXED]
    -All actions trying to fix the Screen brightness adjustment didn't work. [FAILED]
    Please do help me on this. Thanks in advance!!!

    Yes I own U400 too and I'm using it now. To many forums been read, can't remember which one. Basically, u have to clean AMD and Intel drivers that come along with Win 8. Why? Because the Win8 driver database will lead the device ID "DEV_6760" (if you looking at display adapter device properties) to HD 7400 series instead of HD 6470M, again why? At the bigining only the HD 7400 series already "certified" by Microsoft, while the 6470M out of somewhere. Current CCC (or else) + 6470 drivers, contain also driver for 7400 series in same packages (at least until now, hopefully near future they will release an update). So you can gues where the windows will lead to? Yes 7400 series (certified one). This will explain also why the Energy Management didn't work to= "missing identifier" or we can say "hardware not match".
    You have to find a "fix" driver which contain only HD 6470M and install it manually trhu "Have Disk" option, after you claan all AMD and Intel driver. If you success, then install the CCC from Lenovo Support and from ATI ( I use 12.11 Beta8 Net4 CCC - this is a must), but remember to unchek the AMD Display driver when you install both CCC, and leave the rest checked including Intel Component. Then you can download install anything you want =).
    Leschat's driver did't work on my and "harm" the system. Believe it or not, I found the AMD 6470M standalone driver on HP website. They call it "SoftPack", which actually contain CCC software.
    It's quite tricky thing, that's why not everyone willing to try. But I think it's worth to try, as the risk is not too deep, just backup anything befor you do it. Cheer

  • I need driver for ati switchable graphics 4250/6370 on windows 8

    The video driver in HP is only for windows 7, and in the Ati webpage is only for one graphics card and not for switchable mode  under windows 8, please i need drivers for the hp dv7 4267cl model.
    i have three notebook of this model for software developers, i need update. any suggestion?
    Graphics card: ATI 4250 / 6370 switchable
    Notebook model: DV7 4267cl

    Hello HK_Ariel,
    Thank you for posting on the HP Forums!
    I understand you are looking for a WIndows 8 ATI driver for your computer. This driver does not exist, as you indicated. You would need to return the computer to Windows 7 to use the switchable graphics.
    Mario
    I worked on behalf of HP.

Maybe you are looking for

  • MacBook White - Possible to reload OSX from an external harddrive?

    Ok heres the problem, I own a MacBook White (late 2006) my harddrive and optical drive have failed, I have replaced my harddrive but I'm currently in a pickle with the optical drive (im a university student and funds and time are not on my side). My

  • Few issues with plug in's I need help with.

    Hi guy's! I bought my 17" G4 powerbook yesterday and I am trying to get it setup to work on all the webpages I visit. My first issue is that on one site I was told by pop up that I needed the wmp 9 software so I went to the downloads site and dl'ed w

  • Strange iPhone and HDTV Issue

    This is probably the strangest iPhone issue I've encountered to date (even more weird than the "stop the image rotation half way" bug). For those who either don't know or don't care, the Major League Baseball playoffs are going on right now. For the

  • New-MailboxExportRequest remains "queued" at 0%

    Greetings, my mailbox exports are going into "queued" status, and remain at 0% complete even after many hours. This is occurring on every mailbox which we've tried to export (about a dozen so far), and they are scattered across all 16 of our DBs. It

  • Cannot open Quick Time movies in iLife 11

    I got my first digitized Super8 films back on an external hard drive, 1 TB. They were converted to Quick Time movies 1280x720, Codecs: Component Y' CbCr 10bit 4:2:2 ( I have no idea what this all means). All I had asked was to get them in .mov files.