W500 / Win7 x64 // Der AMD Treiber wurde nach einem Fehler wiederhergestellt
Moin.
Leider habe ich mal wieder ein Problem mit meinem TP.
Ich bekomme ständig einen extrem verpixelten Bildschirm, der zwischen einigen Sekunden bis zu 15 Minuten bleibt.
Meist kommt anschließend kurz ein schwarzer Bildschirm gefolgt von dem "normalen".
Anschließend erhalte ich die Fehlermeldung "Der AMD Anzeigetreiber wurde nach einem Fehler wiederhergestellt"
Leider ist der Fehler nicht reproduzierbar, sondern tritt völlig unvorhergesehen auf. Teilweise direkt beim Start, aber auch mal nach vielen Stunden Betrieb.
Was mir aufgefallen war, ist das für mein Gefühl die Temperatur der Luft aus dem Lüfter sehr hoch war.
Daraufhin habe ich mir das Tool PFControl besorgt, welches mir eine Temperatur von oft über 60° angezeigt hat.
Zudem ging der Lüfter teilweise komplett aus.
Daraufhin habe ich die Lüftersteuerung auf manuell umgestellt, und lasse ihn seither mit voller Leistung lüftern.
Ich habe das Gefühl das die Aussetzer seither weniger geworden sind, aber leider sind sie immer noch vorhanden.
Beim PFControl ist mir noch aufgefallen, das ständig Sensoren wegfallen "read error on sensor..." einen kurzen Moment später wieder hinzugefügt werden "Sensor ... hinzugefügt".
Aktuell halte ich mich bei einer Temperatur von ~35°
Ich bin mir aber auch nicht sicher, ob es wirklich ein Temperaturproblem ist...
Es ist nur auf jeden Fall saumäßig nervig, wenn mitten in der Arbeit auf einmal der Bildschirm weg ist, und man nichts machen kann.
Habt ihr ähnliche Probleme oder vielleicht sogar eine Lösung???
VG
Link zum Bild
Admin Edit; Bild >100kb wurde zu Link konvertiert
Das sieht sehr nach einem generellen Problem der Grafikkarte aus. Hast du vielleicht noch Garantie auf das Gerät?
Similar Messages
-
T450s „Der Anzeigetreiber wurde nach einem Fehler wiederhergestellt" Intel HD
Hallo Forum,
ich erhalte bei meinem neuen T450s (i5-5200U, nur OnChip-Grafik) völlig sporadisch, nachdem der Bildschirm kurz schwarz wird, folgende Fehlermeldung: „Der Anzeigetreiber wurde nach einem Fehler wiederhergestellt“.
Auch eine Installation der aktuellsten Treiber vom 22.04.2015 sowie der BIOS-Version (1.12) von Lenovos-Homepage brachten leider keine Besserung, da das Problem heute, nach einigen Tagen ohne Fehler, im Abstand weniger Minuten wieder zweimal auftrat.
Laut Solution-Center wären derzeit ebenfalls keine neueren Treiber vorhanden.
Einmal ließ sich die Helligkeit des Displays plötzlich weder über die Funktions-/Sondertasten, noch über Windowseinstellungen steuern. Nach einem Neustart funktionierte alles wieder einwandfrei.
Einige Tage zuvor waren alle Funktions-/Sondertasten ausgefallen und ließen sich nur nach einem Neustart wieder in Betrieb nehmen. Ob dies in Zusammenhang mit dem erstgenannten Problem steht, kann ich nicht mit Sicherheit beurteilen.
Ich denke, es könnte womöglich ein Hardwaredefekt der Grafikeinheit der CPU bzw. des Hauptspeichers vorliegen. Zumindest kenne ich eine ähnliche Fehlermeldung damals von "defekten" GTX 570 Grafikkarten, die ab Werk mit zu wenig Spannung betrieben wurden.
Oder kennt jemand das Problem in Zusammenhang mit T440s/T450s und wüsste eine bestimmte Treiber- und/oder eine Biosversion, die das Problem beheben könnte?
Die Lenovo-eigenen Diagnosetests melden keine Fehler.
ich würde das Gerät nur ungerne ebenfalls zurücksenden müssen, falls es sich tatsächlich softwareseitig lösen lassen würde. Mit dem technischen Support hatte ich bereits Kontakt aufgenommen. Das war allerdings eine sehr "desillusionierende" und wenig hilfreiche Erfahrung .
Wer weiß Rat?What does this have to do with Photoshop Scripting?
Apart from trying the general Photoshop Forum you may wanter to read these:
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
http://forums.adobe.com/docs/DOC-2325 -
CS6 Anzeigetreiber musste nach einem Fehler wiederhergestellt werden
Hallo, seit einiger Zeit kann ich PS Dateien nicht mehr über den normalen Ordner öffnen, weil sich Photoshop dann direkt aufhängt und ich es (über den Task-Manager) schließen muss. Ich kann die Dateien jedoch über die Bridge problemlos öffnen. Ich habe gelesen dass das oft wegen Überhitzung der Grafikkarte passieren kann, mir ist aber schleierhaft, warum es dann überdie Bridge geht... Ich benutze einen Asus Laptop mit Windows 8.1, 64 Bit.
LGWhat does this have to do with Photoshop Scripting?
Apart from trying the general Photoshop Forum you may wanter to read these:
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
http://forums.adobe.com/docs/DOC-2325 -
PrE-10 Will not start in Win7(x64)
I sincerely hope this is not redundant, but I have spent days on this forum looking for answers, but with no luck. I have seen many similar questions, but none of the 'fixes' proposed are relevant, or do not work for me.
History:
I have been running PrE-10 since its release, on Win-7(32-bit). I recently had a system crash after installing Windows-8 Beta and had to wipe my hard drive and start from scratch. This time I loaded Win-7 (x64). All my original apps I had stored on an external drive. Some re-installed, some not. I had to re-download PSE-10, and PrE-10 as 64-bit apps.
PSE-10 and the associated Organizer, work fine as before. PrE-10 however does not start. I get the splash screen, with the options of NEW, OPEN and Organizer. Of these, only Organizer opens. The other two options either bring up a Windows Error box 'Pre-10 has failed to start', or it just sits and does nothing.
It is not a system limitation as I have far more than the requirements needed to run it and as I said, it worked fine in the 32-bit version, and nothing else has changed (that I have input), so I am baffled.
As I said, I have done many of the proposed fixes I have seen on the forum, if they are pertinent to my system, and even some that were not. I have now completed the reinstallation of most of my applications, and so far only PrE is causing a problem, but it is very important to me as I am working on a project that requires it.
I have done a Belarc report, but I do not see a link to upload it. I see links for images, videos, tables and weblinks, but nothing for files (pdf). I will attempt to load it as an image and see if this works. I do not want to post it as text or HTML as it is 7 pages long! (Nope, it does not insert). Perhaps someone can tell me how to upload the file.
Here is a system summary:
OS Name
Microsoft Windows 7 Ultimate
Version
6.1.7601- Service Pack 1 Build 7601
Other OS Description
64-bit
OS Manufacturer
Microsoft Corporation
System Name
DOUG-IQ775
System Manufacturer
HPQOEM
System Model
SLIC-CPC (TouchSMart IQ-775)
System Type
x64-based PC
Processor
AMD Turion(tm) 64 X2 Mobile Technology TL-58, 1900 Mhz, 2 Core(s), 2 Logical Processor(s)
BIOS Version/Date
American Megatrends Inc. 5.15, 11/26/2007
SMBIOS Version
2.4
Windows Directory
C:\Windows
System Directory
C:\Windows\system32
Boot Device
\Device\HarddiskVolume1
Locale
United States
Hardware Abstraction Layer
Version = "6.1.7601.17514"
User Name
DOUG-IQ775\DOUG
Time Zone
US Mountain Standard Time (AZ)
Installed Physical Memory (RAM)
4.00 GB
Total Physical Memory
4.00 GB
Current Available Physical Memory 1.68 GB
Total Virtual Memory
8.00 GB
Available Virtual Memory
5.32 GB
Page File Space
4.00 GB
Page File
C:\pagefile.sys
STORAGE
USB Flash Memory, s/n 001D0F1FCF2DC8C08406020B, rev 1.00
Generic Flash Disk -- drive 8, 8GB s/n 03483DBB, rev 8.07
WDC WD16 00BEVS-60RST0 -- drive 7, 160GB s/n WDC WD1600 WD-WXC108351497
Generic CF Reader -- drive 5, s/n 058F12M111B, rev 1.01
Generic SM/SD/MS Reader -- drive 6, s/n 058F12M111B, rev 1.00
Century EX35SW4_SB4-A USB Device -- drive 1, s/n 011E011D3B, rev 0100
Century EX35SW4_SB4-B USB Device -- drive 2, s/n 011E011D3B, rev 0100
Century EX35SW4_SB4-C USB Device -- drive 3, s/n 011E011D3B, rev 0100
Century EX35SW4_SB4-D USB Device -- drive 4, s/n 011E011D3B, rev 0100
HARD DRIVES
c:/D:(NTFS on drive 0) *
500.11 GB
k: (NTFS on drive 7)
160.03 GB
w: (NTFS on drive 1)
250.06 GB
x: (NTFS on drive 2)
250.06 GB
y: (NTFS on drive 3)
250.06 GB
z: (NTFS on drive 4)
250.06 GB
WDC WD16 00BEVS-60RST0 USB Device [Hard drive K:] (160.04 GB) -- drive 7, SMART Status: Healthy
WDC WD50 00AAKS-65TMA SCSI Disk Device (500.10 GB) -- drive 0, s/n WD-WCAPW3069745, SMART Status: Healthy
Drives new – drive encryption
Memory Modules c,d
1660.37 Gigabytes Usable Hard Drive Capacity
914.49 Gigabytes Hard Drive Free Space
CD/DVD
TSSTcorp DVDR/RW TS-T632L ATA Device [Optical drive]
Software Versions & Usage
i Adobe Download Assistant
i Adobe Help
i Adobe Photoshop Elements Editor Version 10.0
ı i Adobe Photoshop Elements Version 10.0
ı i Adobe Premiere Elements Version 10, 0, 0, 0
i Adobe Systems Incorporated - Elements Organizer Version 10.0
ı i Adobe Systems Incorporated - ElementsAutoAnalyzer Version 10, 0, 0, 0
Adobe Reader and Acrobat Manager Version 1.5.7.0
i Adobe Reader Version 10.1.3.23
i Adobe Systems, Inc. - Shockwave Flash Version 11,3,300,270
ı i Adobe Updater Startup Utility Version 2.2.0.2 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)
ı i Adobe® Flash® Player Update Service Version 11,3,300,270
i Amazon MP3 Downloader Version 1.0.0.0
i Any Audio Converter Application Version 3, 3, 8, 1
i Any DVD Converter Application Version 4, 0, 1, 1
ı i Apple Inc. - QuickTime QuickTime 7.7.2 (1680.56)
ı i Apple Push
i Apple Software Update Version 2.1.3
ı i Belarc, Inc. - Advisor Version 8.2g
i Canon IJ Driver Uninstaller Version 1.2
i Canon IJ Utility Uninstaller Version 1, 3, 0, 0
ı i CANON INC. - CNSLMAIN.EXE Version 1, 4, 3, 0
i CANON INC. - MP Navigator EX Version 1, 0, 7, 0
i CyberLink - CLDownloader Version 2.3.0.2715
i CyberLink - DZM Version 2.05.3206
ı i CyberLink Corp. - PowerDirector Version 9.0.0.2930
ı i Google Chrome Version 21.0.1180.75
ı i Google Update Version 1.3.21.103
ı i GSpot Codec Information Appliance Version 2, 7, 0, 1
ı i Igor Pavlov - 7-Zip Version 9.20
ı i INR Desk Version 2.0.0.0
ı i Microsoft Corporation - Internet Explorer Version 9.00.8112.16421
ı i Microsoft Corporation - Windows Installer - Unicode Version 5.0.7600.16385
Microsoft Corporation - Windows® Search Version 7.00.7600.16385
ı i Microsoft Malware Protection Version 4.0.1526.0
i Microsoft Network Inspection System Version 4.0.1526.0
ı i Microsoft Security Client Version 4.0.1526.0
i Microsoft ® Windows Script Host Version 5.8.7600.16385
ı i Microsoft® .NET Framework Version 2.0.50727.4927
i Microsoft® .NET Framework Version 3.0.6920.5011
i Microsoft® .NET Framework Version 4.0.31106.0
ı i Microsoft® CoReXT Version 7.250.4232.0
ı i Microsoft® Windows® Operating System Version 12.0.7600.16385
i OpenOffice.org 3.4 Version 3.04.9590
i OpenOffice.org Base Version 3.04.9590
i OpenOffice.org Calc Version 3.04.9590
i OpenOffice.org Draw Version 3.04.9590
ı i OpenOffice.org Impress Version 3.04.9590
i OpenOffice.org Math Version 3.04.9590
i OpenOffice.org Writer Version 3.04.9590
i OpenOffice.org Writer(Web) Version 3.04.9590
ı i Orbitdownloader.com - Orbit Downloader Version 4, 1, 1, 1
i PlotSoft L.L.C. - PDFill PDF Editor with FREE PDF Writer and PDF Tools Version 9.0.0.9
i PlotSoft LLC - PDFill FREE PDF and Image Writer Version 9.0.0.9
ı i Realtek - ReStart Application Version 500, 1001, 719, 2007
ı i Realtek - RtlService Application Version 700, 1004, 1207, 2009
ı i RichVideo Module Version 2.0.1.5417
i Safer Networking Limited - Secure Shredder Version 1.9.0.0
i Safer Networking Limited - Spybot - Search & Destroy Version 1, 5, 2, 0
i Safer Networking Limited - Spybot - Search & Destroy Version 1, 6, 0, 30
i Safer Networking Limited - SpyBot-S&D Version 1, 6, 2, 0
ı i Safer Networking Ltd. - Spybot - Search & Destroy Version 1, 6, 0, 0
i SmartSound Sonicfire Pro Version 5.7.1
i Sun Microsystems, Inc. - Java(TM) Platform SE 6 Version 6.0.0.105
i The Audacity Team - Audacity® Version 1,3,13,0
Can anyone help me get this app going... please!!
Thanks in advance!
DNThis is frustrating! I just answered this post at length, but when I posted it it disappered!
Guess I have to start over and hope for the best!
Is that an HP laptop?
No, it is a desktop. However it is an HP 'hybrid' all-in-one, and uses a lot of laptop hardware and software to keep the low profile case.
-HP Fingerprint/Password conflict http://forums.adobe.com/thread/911575
I read this and it does not apply to my system.
Otherwise, unless I missed it, I do not see mention of your graphics/video card brand/model and driver number
This is why I asked how to upload the Belarc report! Too much info to post. Here is the Graphics info.
Name
NVIDIA GeForce Go 7600
PNP Device ID
PCI\VEN_10DE&DEV_0398&SUBSYS_2A40103C&REV_A1\4&1BC86A40&0&0020
Adapter Type
GeForce Go 7600, NVIDIA compatible
Adapter Description
NVIDIA GeForce Go 7600
Adapter RAM
256.00 MB (268,435,456 bytes)
Installed Drivers
nvd3dum,nvd3dumx.dll
Driver Version
7.15.10.9804
INF File
oem12.inf (nv_NV3x section)
Color Planes
Not Available
Color Table Entries
4294967296
Resolution
1440 x 900 x 59 hertz
Bits/Pixel
32
Display
Nvidia Flat Screen [Monitor] 19.25" vis
Driver
c:\windows\system32\drivers\nvlddmkm.sys (7.15.10.9804, 5.73 MB (6,006,696 bytes), 1/25/2007 6:43 PM)
Check the ATI or nVidia or ??? website to be sure you have a current driver
Another interesting story, that! Nvidia/GeForce does an auto detect and correctly identifies the graphics card, and sends me to a link to upgrade the driver. The driver page says it is for Vista x64 and Win7 x64 (even its long name has 'win7-x64' in it). I download and attempt an install, and it comes back with "you are running Windows 7 64-bit. This driver is for Vista only. Installer closing." I went back and tried 4 other Win-7 x64 drivers, all reported the same thing, even though they state on the site they are for Win7 x-64. I then went to the Device Manager and tried to update the driver, but it reported using 'the most current driver available'. So I uninstalled the current Nvidia driver, which put me into VGA mode. I then went to Windows Update and did a search for updates. It found a missing Nvidia driver and called it 'Nvidia Driver for Win7 x64'. I downoaded and installed it and my system returned to normal 1440 x 900 display. I checked the driver info and it is the same driver as the original, including the release date, so apparently the original driver was in fact x64 compatible, and there does not appear to be an updated driver for it.
Also, for laptops... if that is what you have
-http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modul es.html
-http://forums.adobe.com/thread/1001579
It is not a laptop, but as it uses many laptop softwares and hardware, I will check these and see if they help. I will post the results.
-Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
There are no DISPLAY options in my BIOS setup. There is also no update available for the BIOS from HP
Thanks for the help.
DN -
I cannot install windows 7 x64 with AMD/ASUS RAID driver
Trying to install Windows 7 Ultimate x64 on an ASUS M5A97 mobo with AMD SB850 RAID, two WD 750GB drives configured as RAID 0. No drives are recognized by W7 install, so I choose Load Drivers. I put the drivers on a USB stick. Install finds the drivers there,
starts loading them, then comes back with "Installing an unsigned 64 bit driver is not supported and may result in an unstable Windows installation." I downloaded the latest drivers from ASUS website which are WHQL certified (as are the one's on the motherboard
disk). I saw other posts that recommend clicking Repair instead of Install, but I don't see where that option is. All I am given as options are Upgrade or Install. Choosing Upgrade tells me to boot Windows first. But this is a brand new install so...
I tried pressing F8 as setup was booting and chose "Disable Signed Driver Requirement" but that had no effect at all. If I turn off the RAID W7 sees both disks and happily installs. I see related posts going back to 2009; surely someone has
a solution for this issue?
Da BombHi guys,
I have been struggling with the same issue.
Win7 x64. Gigabyte GA-X79-UD3 Mobo with Intel core i7-3930K at 3.20 GHz
Marvell 88SE9172 SATA RAID controller with two Hitachi 500 GB spinning disks configured as RAID1
Windows would get to the point of asking for a mass storage drive. It would not see the RAID I had created.
Tried every driver I could find. Tried drivers from the "Station Drivers" website. Tried Marvell drivers for the same chip from the ASUS website. No luck. Tried loading from CD as well as USB flash drive. Always the same result... Windows would find
the drivers appropriate for the hardware found, I would select the RAID version, and after a few seconds, would report that the drivers were unsigned, and the installation was not supported for 64-bit drivers. Clicking OK would take me back to the load drivers
display with no new drives listed in the available drives window.
I tried hitting F8 during startup, and selected the "allow install of unsigned drivers option". That didn't do ANYTHING. Still the same error.
Someone suggested putting the drivers in the root directory. That didn't work. I also disabled all other drives except one CD rom and a USB drive and made sure that my RAID array was the first drive in the boot list.
Tried doing a windows repair, as someone else suggested. (This is an option that is available on the install disk I am using. It's enabled as part of EMS (emergency management services) in setup. Anyway, this was reported to be a workaround
to the signed driver issue. It would allow me to browse to the individual files, but no matter which one I selected, the response was "cannot find hardware appropriate to the driver selected" or some such nonesense. So I gave up on that.
Doing the install with the controller in IDE mode with just one drive connected, would result is Windows installing without a hitch. The problem was clearly when I presented 64-bit windows with a controller in RAID mode.
Long story less long, here's what worked for me....
Out of desperation, I began trying other subfolders in the driver lists. The Gigabyte manual indicated that the AMD64 subfolder was the correct one for the Marvell controller, when using RAID mode with 64-bit Windows. After trying every subfolder of
every driver I could find, the driver in the i386 folder actually worked. It initially came back with the same error about unsigned drivers, but after clicking OK, my RAID drive showed up in the list. I have been able to partition and format
the drive from within Windows setup, and am continuing with the install now. Hopefully won't be any problems booting from the drive post install, but so far it looks good, and I'm relieved that I was able to get it this far.
The whole process has been one of the most frustrating computing experiences I've ever had. This is what it was like back in the 90's when building PCs from scratch. I'm amazed that in this day and age the process is still so poorly documented
and filled with potholes, traps and caveats. Shame on the entire PC industry for allowing this to continue. I'm not asking that they jump in and try to automate it and do all the thinking for me (their solution for everything lately)...all I'm asking for it
clear, concise and accurate INFORMATION.
With the right information, and software that provides accurate feedback, this would all be easy...and even fun.
Hope this helps someone faced with the same problem. -
PS6b1: "The GPU Sniffer Crashed" Win7 X64
PS CS6B1 reports "Photoshop detected an error in your display drive" and disables GPU settings when running on Win7 x64 system with Asus EAH 6970 (AMD Radeon 6970) graphics card. I verfied that the latest Asus/AMD drivers are installed and working properly.
Adobe Photoshop Version: 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:5 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 3200 MHz
Built-in memory: 24566 MB
Free memory: 18591 MB
Memory available to Photoshop: 22238 MB
Memory used by Photoshop: 60 %
Image tile size: 128K
Image cache levels: 4
The GPU Sniffer crashed on 3/24/2012 at 8:27:58 AM
Display: 3
Display Bounds:= top: 146, left: 2560, bottom: 1226, right: 4480
Display: 2
Display Bounds:= top: 178, left: -1920, bottom: 1258, right: 0
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 1440, right: 2560
No video card detected
Serial number: Tryout Version
Application folder: E:\programs\Adobe Photoshop CS6 (64 Bit)\
Temporary file path: E:\scratch\
Photoshop scratch has async I/O enabled
Scratch volume(s):
E:\, 1.82T, 1.70T free
Required Plug-ins folder: E:\programs\Adobe Photoshop CS6 (64 Bit)\Required\
Primary Plug-ins folder: E:\programs\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
A3DLIBS.dll A3DLIB Dynamic Link Library 9.2.0.112
ACE.dll ACE 2012/01/18-15:07:40 66.492997 66.492997
adbeape.dll Adobe APE 2012/01/25-10:04:55 66.1025012 66.1025012
AdobeLinguistic.dll Adobe Linguisitc Library 6.0.0
AdobeOwl.dll Adobe Owl 2012/02/09-16:00:02 4.0.93 66.496052
AdobePDFL.dll PDFL 2011/12/12-16:12:37 66.419471 66.419471
AdobePIP.dll Adobe Product Improvement Program 6.0.0.1642
AdobeXMP.dll Adobe XMP Core 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPFiles.dll Adobe XMP Files 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPScript.dll Adobe XMP Script 2012/02/06-14:56:27 66.145661 66.145661
adobe_caps.dll Adobe CAPS 5,0,10,0
AGM.dll AGM 2012/01/18-15:07:40 66.492997 66.492997
ahclient.dll AdobeHelp Dynamic Link Library 1,7,0,56
aif_core.dll AIF 3.0 62.490293
aif_ocl.dll AIF 3.0 62.490293
aif_ogl.dll AIF 3.0 62.490293
amtlib.dll AMTLib (64 Bit) 6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00) 1.000000
ARE.dll ARE 2012/01/18-15:07:40 66.492997 66.492997
AXE8SharedExpat.dll AXE8SharedExpat 2011/12/16-15:10:49 66.26830 66.26830
AXEDOMCore.dll AXEDOMCore 2011/12/16-15:10:49 66.26830 66.26830
Bib.dll BIB 2012/01/18-15:07:40 66.492997 66.492997
BIBUtils.dll BIBUtils 2012/01/18-15:07:40 66.492997 66.492997
boost_date_time.dll DVA Product 6.0.0
boost_signals.dll DVA Product 6.0.0
boost_system.dll DVA Product 6.0.0
boost_threads.dll DVA Product 6.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.0.5.19287 2.0.5.19287
CoolType.dll CoolType 2012/01/18-15:07:40 66.492997 66.492997
data_flow.dll AIF 3.0 62.490293
dvaaudiodevice.dll DVA Product 6.0.0
dvacore.dll DVA Product 6.0.0
dvamarshal.dll DVA Product 6.0.0
dvamediatypes.dll DVA Product 6.0.0
dvaplayer.dll DVA Product 6.0.0
dvatransport.dll DVA Product 6.0.0
dvaunittesting.dll DVA Product 6.0.0
dynamiclink.dll DVA Product 6.0.0
ExtendScript.dll ExtendScript 2011/12/14-15:08:46 66.490082 66.490082
FileInfo.dll Adobe XMP FileInfo 2012/01/17-15:11:19 66.145433 66.145433
filter_graph.dll AIF 3.0 62.490293
hydra_filters.dll AIF 3.0 62.490293
icucnv40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
icudt40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
image_compiler.dll AIF 3.0 62.490293
image_flow.dll AIF 3.0 62.490293
image_runtime.dll AIF 3.0 62.490293
JP2KLib.dll JP2KLib 2011/12/12-16:12:37 66.236923 66.236923
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 10.0
LogSession.dll LogSession 2.1.2.1640
mediacoreif.dll DVA Product 6.0.0
MPS.dll MPS 2012/02/03-10:33:13 66.495174 66.495174
msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcp100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcp90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcr100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcr80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CS6 CS6
Plugin.dll Adobe Photoshop CS6 CS6
PlugPlug.dll Adobe(R) CSXS PlugPlug Standard Dll (64 bit) 3.0.0.383
PSArt.dll Adobe Photoshop CS6 CS6
PSViews.dll Adobe Photoshop CS6 CS6
SCCore.dll ScCore 2011/12/14-15:08:46 66.490082 66.490082
ScriptUIFlex.dll ScriptUIFlex 2011/12/14-15:08:46 66.490082 66.490082
tbb.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
TfFontMgr.dll FontMgr 9.3.0.113
TfKernel.dll Kernel 9.3.0.113
TFKGEOM.dll Kernel Geom 9.3.0.113
TFUGEOM.dll Adobe, UGeom© 9.3.0.113
updaternotifications.dll Adobe Updater Notifications Library 6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 6.0.0.24
WRServices.dll WRServices Friday January 27 2012 13:22:12 Build 0.17112 0.17112
wu3d.dll U3D Writer 9.3.0.113
Required plug-ins:
3D Studio 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Accented Edges 13.0
Adaptive Wide Angle 13.0
ADM 3.11x01
Angled Strokes 13.0
Average 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Bas Relief 13.0
BMP 13.0
Chalk & Charcoal 13.0
Charcoal 13.0
Chrome 13.0
Cineon 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Clouds 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Collada 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Color Halftone 13.0
Colored Pencil 13.0
CompuServe GIF 13.0
Conté Crayon 13.0
Craquelure 13.0
Crop and Straighten Photos 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Crop and Straighten Photos Filter 13.0
Crosshatch 13.0
Crystallize 13.0
Cutout 13.0
Dark Strokes 13.0
De-Interlace 13.0
Dicom 13.0
Difference Clouds 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Diffuse Glow 13.0
Displace 13.0
Dry Brush 13.0
Eazel Acquire 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Embed Watermark 4.0
Entropy 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Extrude 13.0
FastCore Routines 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Fibers 13.0
Film Grain 13.0
Filter Gallery 13.0
Flash 3D 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Fresco 13.0
Glass 13.0
Glowing Edges 13.0
Google Earth 4 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Grain 13.0
Graphic Pen 13.0
Halftone Pattern 13.0
HDRMergeUI 13.0
IFF Format 13.0
Ink Outlines 13.0
JPEG 2000 13.0
Kurtosis 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Lens Blur 13.0
Lens Correction 13.0
Lens Flare 13.0
Liquify 13.0
Matlab Operation 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Maximum 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Mean 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Measurement Core 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Median 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Mezzotint 13.0
Minimum 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
MMXCore Routines 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Mosaic Tiles 13.0
Multiprocessor Support 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Neon Glow 13.0
Note Paper 13.0
NTSC Colors 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Ocean Ripple 13.0
Oil Paint 13.0
OpenEXR 13.0
Paint Daubs 13.0
Palette Knife 13.0
Patchwork 13.0
Paths to Illustrator 13.0
PCX 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Photocopy 13.0
Photoshop 3D Engine 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Picture Package Filter 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Pinch 13.0
Pixar 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Plaster 13.0
Plastic Wrap 13.0
PNG 13.0
Pointillize 13.0
Polar Coordinates 13.0
Portable Bit Map 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Poster Edges 13.0
Radial Blur 13.0
Radiance 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Range 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Read Watermark 4.0
Reticulation 13.0
Ripple 13.0
Rough Pastels 13.0
Save for Web 13.0
ScriptingSupport 13.0
Shear 13.0
Skewness 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Smart Blur 13.0
Smudge Stick 13.0
Solarize 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Spatter 13.0
Spherize 13.0
Sponge 13.0
Sprayed Strokes 13.0
Stained Glass 13.0
Stamp 13.0
Standard Deviation 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Sumi-e 13.0
Summation 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Targa 13.0
Texturizer 13.0
Tiles 13.0
Torn Edges 13.0
Twirl 13.0
U3D 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Underpainting 13.0
Vanishing Point 13.0
Variance 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Variations 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Water Paper 13.0
Watercolor 13.0
Wave 13.0
Wavefront|OBJ 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
WIA Support 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Wind 13.0
Wireless Bitmap 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
ZigZag 13.0
Optional and third party plug-ins:
Camera Raw 7.0
Plug-ins that failed to load: NONE
Flash:
Mini Bridge
Kuler
Installed TWAIN devices: NONEWhat display driver version do you have?
Try this: Go to the ATI web site (really, it's the AMD web site), and locate and download/install the latest Catalyst package for your hardware and OS (if memory serves, it's 12.3).
-Noel -
32-bit ODAC 11.2.0.2.1 Installed on Win7 X64 with Oracle 11gR2 x64
I have Visual Studio 2010 x64 installed on a Win7 x64 Enterprise system, along with Oracle Express Edition 11gR2 x64. I downloaded and installed 32-bit ODAC 11.2.0.2.1 so I could use Oracle databases with Visual Studio, along with SQL Server.
When I tried to run InstallAllOracleASPNETProviders.sql in SqlExplorer, I got an error
D:\app\PaulK\product\11.2.0\client_1\ocijdbc11.dll: Can't load IA 32-bit .dll on a AMD 64-bit platform. Vendor code 0.
Everything was working fine before I installed ODAC 11.2.0.2.1.
I've seen references to a beta x64 version of ODAC. Where do I find it? Do I have to uninstall the 32-bit ODAC first? Will uninstalling the 32-bit ODAC fix SqlExplorer?
Thanks.PaulK wrote:
I have Visual Studio 2010 x64 installed on a Win7 x64 Enterprise system, along with Oracle Express Edition 11gR2 x64. Not sure I follow. Neither VS 2010 or XE 11.2 exists in a 64-bit release. What precisely do you have installed?
I downloaded and installed 32-bit ODAC 11.2.0.2.1 so I could use Oracle databases with Visual Studio, along with SQL Server.Since VS is a 32-bit app (though it can run on 64-bit OS and produce 64-bit binaries), it needs 32-bit libraries, yes.
Is MS SQL Server instance a 32-bit or a 64-bit install? Perhaps both 32-bit and 64-bit clients are needed for planned setup.
D:\app\PaulK\product\11.2.0\client_1\ocijdbc11.dll: Can't load IA 32-bit .dll on a AMD 64-bit platform. Vendor code 0.It seems you are running SQL Developer on a 64-bit java machine. The 64-bit jvm obviously can't load a 32-bit dll, which I'm guessing was found via the 32-bit ODAC's PATH entry. Entry was listed first since Client/ODAC was installed last. Did you use Connection type TNS in SQL Developer? (Or Use OCI/Thick driver ticked in the database / advanced options, in Preferences.)
What's the version of SQL Developer?
Everything was working fine before I installed ODAC 11.2.0.2.1.If I'm correct in various assumptions, you have to cater for different environments/requirements.
E.g to run SQL Developer with correct set of libs.
set PATH=<path to libraries for sql developer/jvm>;<remaining PATH stuff>
x:\some\path\here\sqldeveloper.exe
Another way could be to use Instant Client and drop required lib files (.dll) in proper location within SQL Developer home. (So that it will find proper dlls directly in "cwd" instead of searching via PATH.)
I've seen references to a beta x64 version of ODAC. Where do I find it? There are both production and beta releases.
64-bit ODAC home page:
http://www.oracle.com/technetwork/database/windows/downloads/index-090165.html
Edited by: orafad on Dec 3, 2011 10:20 PM
Edited by: orafad on Dec 4, 2011 1:31 AM -
Wheres all the WIN7 X64 drivers
I have a K9N2 sli plat. This is a new build w/ win7 x64. I don't see where all the drivers are. I got a few from drivers on the mainboard page, but nothing useful. I cant run live update since I don't have net on it yet. That's why I'm looking for drivers.
CM HAF 932
MSI K9N2 sli plat
AMD Phenom 9600 BE
OCZ DDR2 1066 8GB
XFX GTS 250
Seagate 1TBx2
LG cd/dvd burner
LG blue ray
Corsair HX1000Don't use Live Update, it's best to download manually and then install whatever you need.
If you need to update BIOS: >> Use the MSI HQ Forum USB flasher <<
"w/ that b4."
Please use normal English, this is a "Global forum" and people use many languages that must use online translators and the chat room, net-speak stuff like that does not translate. -
Z87-G45 Gaming not able to install Win7 x64 with Samsung 840 EVO
I have a brand new:
i5 4570
MSI Z87-G45 Gaming
250GB Samsung 840 EVO
1x 8GB Corsair ValueRam DDR3 1600
I got everything hooked up properly, but I am not able to install Win7 x64 through an USB pen drive (Kingston Datatravel 32GB USB3) I have a proper official and Legit MSDN ISO, formatted by the Win7 USB tool from MS itself.
Note that i do not have an optical device (DVD) installed so I cannot use it 'the old way'.
Bios settings are okay, everything is recognized
USB Legacy - Kingston Datatraveler
HDD Legacy - Samsung 840 EVO
Win7 setup loads properly; but before I can select the Harddrive / SSD to install Win7 on I get prompted that additional (3rd party) drivers are needed to proceed. The volume is not recognized. This happens 9 out of 10 times. In the 10% cases I do get the option to format the SSD and/or create partitions. However, installation fails after all, cannot load or find file ...
What I've tried so far:
Switch out the SATA cables and power cables
Switch through the various SATA ports on the MB 1 through 6
Tried UEFI and UEFI/Legacy (UEFI doesn't seem to work at all)
Update UEFI to V 1.50
All the above result in the case mentioned.
I have succesfully installed the SSD in an other PC, using the same pen drive and ISO and it worked like a charme, thus ruling out that the SSD, pen drive or image is corrupt.
Even when I switched out the SSD after Win7 setup has succesfully copied, unpacked and installed all the files (doing this on the other machine where it works like a charm). Then switching it to the MSI Z87...it fails; starting the setup procedure right from the start, like nothing was ever written on the SSD...
Finally i turned to Win8, and guess what, it installed without any glitches on the MSI Z87
What am I missing here, I would really want to install Win7 instead of Win8
Forgot to enable / disable something in the UEFI? I really don't know, google doesn't give much information on this specific problem (SSD is recognized properly by the BIOS / UEFI as far as I can tell)
The only thing I have not tried out so far is updating the Samsung SSD firmware to the 1.0 version which has been release 3 days ago...
Any clues, tips, hunches??Quote from: Bernhard on 25-October-13, 18:33:41
Did you disable Secure Boot in the BIOS? If not, then Win7 won't load.
Hmmm not sure, thanks for the reply, will have to look into that later today!
I didn't change it from the default setting I think, unless it is part of the Win8 features in the UEFI. All where disabled by default, and I kept them disabled.
Where is Secure Boot listed in the UEFI, and any idea wether it is enabled by default?
::EDIT::
Found it in some screenshots, I cannot recall from the top of my head wether it was enabled or disabled, allthough my gutt feeling says it already is disabled.
http://cdn.pcper.com/files/imagecache/article_max_width/review/2013-05-31/09-MSI_SnapShot_23.gif
http://cdn.pcper.com/files/imagecache/article_max_width/review/2013-05-31/10-MSI_SnapShot_24.gif
Nice overview of the entire UEFI btw: http://www.pcper.com/reviews/Motherboards/MSI-Z87-GD65-Gaming-Motherboard-Review/BIOS-Features-continued -
WIN7 x64 Home Basic, 0x80070013 when trying to write or delete files. Disk is write protected.
Hi,
My SD card reader is not able to write or delete and format sd cards.
WIN7 x64 Home Basic, 0x80070013 when I trying to write or delete files. When I trying to format I can see a message that disk is write protected.
The card is not locked, it's work in Lenovo Idea Pad s10 without any problem, It's also work in my Pentax camera.
I'm almost sure that the problem is software, but can't find solution.
Could Any one help me please?
Laptop is new, 8 days in use.I have network shutdown 2.0.1 installed and the pcns process normally would be abend in 1 or 2 minute's time. What could be the problem ? Consider to upgrade the network shutdown to 2.2.1 version. Could the problem be resolved in new version ? Any precaution needs to be taken when installing the new version ?
Terence. -
Adobe programs don't work on Win7 x64 with IE8 x32
I have been working for the last 2 hours trying to get adobe flash 10.1 downloaded and installed on Win7 x64 and IE8 x32. It downloads and crashes and never finishes the install, even though sometimes the adobe site tells me it's installed. when I access a website it asks to download the flash player each and every time.
Mind you I don't have a lot of time to troubleshoot and fix adobe issues. I have clients to take care of and if your not going to make your product easier to use then I will block all adobe flash sites from my clients computers. Needless to say this will make them angry at me but let me tell you I don't forgive. I will bash you each and every time a client calls me.I don't understand - in your post you mention "new Flash Player" several times, but in the subject you mention 10.2...?
What is the exact FP version you have?
For your blue box problem, have you tried to disable Hardware Acceleration? -
IPhone name not recognized by Win7 x64
Hi,
I have 2 iPhone 4, both are using one Apple universal docker to connect to PC, phone has its own name, and diaplay properly on PC wherever the device name is used, ie, under My Computer, Portable Devices. iPhone 4 are shown as A's iPhone or B's iPhone, as Digital Camera.
I encountered this issue after installed iTunes 10.5 or upgraded to iOS 5, I am not sure which one caused the problem. The issue is, B phone is no longer recognized as B by Win7 x64, while A phone has no problem at all, both are with iOS 5.
When I put B phone to docker or even connect to PC directly, it is always recognized as A, the device name is always A's name, but the content (camera photo etc) is still B's content.
When using iTunes, phone's name displays correctly.
I connected B phone to another USB port which is never used by iPhone before, Win7 detected and tried to download/install and finally, B phone is shown as Apple Portable Device, no Phone Name, not as Digital Camera as before. Again in iTunes, both phones are shown correctly with their own name.
Not a big issue but a little bit confused, how to correct device name here?
ThanksType "iphone not recognized by itunes" in the search box at the top of this page.
-
ITunes (Win7 x64) is no longer opening after the latest version update
iTunes (Win7 x64) is no longer opening after the latest version update - I have attempted an un/reinstall - can anyone offer other suggestions?
I am running Windows 7 64-bit, and am trying to reinstall the 64-bit iTunes from the iTunes website. I previously have had this working for the last few years with no major issues, the Apple Software Updater has been pestering me for some time so I finally got it to update. However now iTunes will not start, if I select the icons nothing happens. There are no iTunes applications running in the background in Task Manager either.
I look forward to your suggestions.
Thanks,
James.1. First check if this file APSDaemon.exe is the problem here.
Close your iTunes.
Press Ctrl-Alt-Del key and choose Task Manager. In the "Processes" Tab, select the file APSDaemon.exe and click End Prosses button, then close the task manager window.
Now open itunes and see if it is working?
If that works, to prevent having to do the same process everytime you restart Windows, go to. START button, type in
MSCONFIG
Hit ENTER
Click STARTUP Tab, Uncheck "Apple Push", click OK.
Restart Windows.
2. If that fails, refer to following article to remove SC Files
http://support.apple.com/kb/TS2363
3. If that fails, repair or reinstall your Quicktime. START / CONTROL PANEL / PROGRAMS N FEATURES / hightlight QUICKTIME and click REAPIR. -
Win7 x64 Installation on late 2007 MBP+Mountain Lion
Dear All,
As a long time mac and bootcamp user, I've never expected to face this problem but I've been trying to do this for 3 days.
I'm having trouble installing bootcamp (win7 x64 ultimate) into my late 2007 MBP (2.4GHZ core 2 duo)
Pretty much use the bootcamp assistant from start to finish, tried using install dvd and create boot-able USB stick (by changing the plist.info on the bootcamp assistant package, as my MBP isn't supported.)
With USB stick created by bootcamp assistant, my mbp just simply won't read it even during startup and rEFit startup.
Sometimes it goes into the blank state and says no bootable device.
With win7 install DVD, whenever I use built in superdrive, it got ejected after 2-3 mins,
When I tried using Samsung external dvd burner/player, in place of who-knows dead superdrive, it went into blank screen with only a dash blinking (just like when the first time you start a PC) then disc stop spinning after awhile.
Burned few copy DVDs from extracted ISO (from the orginial install disc) and came up with same results
Recent changes, current condition,etc:
- Changed the stock 160gb harddrive into WD500GB blue scorpio.
- Installed fresh OSX Mountain Lion downloaded from App Store (was Lion) and updated everything.
- Had the very same win7 on bootcamp 3 installed on snow leopard few years ago and keeping it even with Lion (the exact same dvd!)
- Superdrive cannot be used to write but can read normally (install DVD shows up normally in OSX environment.)
- With USB created by bootcamp assistant, rEFit shows "legacy booting" and can't find files inside the USB
- Installation is working flawlessly on my 2011 iMac.
- Can still boot into bootcamp on old internal stock hdd (using external case)
- DVDs burned are Verbatim DVD-R and Sony DVD-R, both are top brands.
- Burner I tried to burn them are 2011 iMac's, 2012 MBP's, Samsung external dvd burner (all fail to boot on my 2007 MBP)
- Tried the method to create usb stick on windows 7, still can't boot.
- Burned DVD using Nero and alcohol 120% on windows 7, still fail.
I wonder if you guys can help me, I'm a designer and I really need to install Corel Draw on bootcamp so I can work on some CDR files on my MBP. And other stuff such as office's finance control program that can only work under windows.
Thanks in advance!Found a workaround, to sum it up, it's pretty much my dead internal superdrive (as for unbootable USB, that's still a mistery). What I did was moving the HDD to my 2012 MBP and install from there. The problem is now that since I installed it on another machine (with ofc all different hardwares) I got blue screen whenever I tried to start Windows7 (in 2007 MBP after moving the HDD back there).
Next step will be replacing the superdrive on 2007 MBP with 2012's. Or if someone got a suggestion like installing the drivers via target disk mode etc, please advice -
Photoshop CS4 (64bit) & Win7 x64 problem fixed
I just wanted to post this to help anyone who might be having this problem.
Here's the problem. When you use Photoshop's lasso tool, you can press ALT at the same time, and it would turn into a magnetic lasso tool that you can use to make straight lines.
Well, what would happen is that I would be making a selection, and then suddenly the screen (both screens, as I'm using a dual screen setup) would flicker, and the selection would complete by itself, and I would be SOL, as, obviously, the selection is not what I wanted.
I could replicate this without fail. I'm halfway done with making a perfect selection, and bam!, this crap happens, and I have to start all over again. It happens ALL the time, no matter what Photoshop setting I used. Photoshop was completely updated, and all my device drivers (video card, mouse drivers, etc.) were all at their latest. So I started looking outside Photoshop, as I was thinking it might be another software problem.
After much trial and error, I narrowed it down to Task Manager. I had Task Manager running in my tray. If I closed Task Manager (not minimize, close), restarted Photoshop, and made my selection using the lasso tool, the issue would go away, but would come back randomly.
The fix? Run Photoshop CS4 in Vista compatibility mode. This solves the problem completely.
I know a lot of you will probably say that you have Photoshop CS4 running flawlessly on Win7 x64, but I have 3 computers, each with completely different configurations, one of them being a laptop, that I was able to replicate this on. Once I ran Photoshop in Vista compatibility mode on each computer, the problem was completely solved.
So I hope this helps anyone who has run into this problem.I confirm he is a blond wanna be.
function(){return A.apply(null,[this].concat($A(arguments)))}
Hudechrome wrote:
It won't work for me. I never used Vista.
(I will neither confirm or deny I am a blonde!)
Thanks for sharing.
Maybe you are looking for
-
I just installed iTunes 10.5 (latest version as of 11 Jan 2012), onto a computer running Windows 7 Ultimate x64. I loaded my music library into it, it compiled the list and separated them by album. But even though I'd assigned most of the albums ar
-
Is there a way to use css media="print" to print all Spry tabbed panels
By setting up a special style sheet and calling that with media="print" I can control all other content that I want to appear in the printed webpage but since the tabbed panels display="none" or display="block" are controlled by the SpryTabbedPanels.
-
Photos on iPad and iPhone that i can't find on iPhoto...
Photos on iPad and iPhone that i can't find on iPhoto...
-
Hi, Im using an iPhone 4 8gb and recently updated my software using my computer to iOS 6.1.3 and some of the tabs are now grayed out and cant function (specific reference to "Show My Caller ID - On/Off tab"). is there a way to fix this or can i down
-
How to determine the week for credit management?
Is there a transaction that will show the week for which credit is determined. For example, when running RVKRED88, it shows the week the order is processed under.