W510 ( 4391 ), T410s ( 2904), not picking the Wireless Network Driver , windows 7 64 bit

Hi Team,
The two Models W510 ( 4391 ), T410s ( 2904) somehow skip to update the Wireless driver
i tried the following :
1 . updated the update retrever tool to new version 5 , it does download the Wireless driver to its repository, however the "system update" tool on the computers does not show/install this driver
2. i reimaged the computer too, still no go
3. created new repository folder when updated the update retrever to new version
Thank you
Tanoj

I'm very excited to finally have a solution for this problem. Thank You Balaji for figuring this out. I've been struggling with this for a number of years, and had only one USB Hard Drive that worked. I too have VMware workstation, and had the missing files
in "c:\windows\inf." I can say with certainty that I did not delete the files from that folder, but something is common in both of our situations. Maybe it has to do with VMware, and some of it's updates over the years. I'm also using nCompute to share out
a networked desktop via the wire. 
One more thing worthy of mention is this machine was an update from Windows Vista, and the USB hard drive that worked was configured back than. So although I could never add another HD, at least I had the one.
Now with having copied over the files, I can plugin other USB enclosures with different drives and they too are working.
Like you mentioned, it was always possible to use USB devices within my Virtual Machines, so it was clear that the USB ports were functional. I actually got the files from a clean Windows 7 VM, copying out the \windows\inf folder and doing a compare between
the the real one and the virtual one. I found the two missing files you mentioned, along with 8 others. I went ahead and included them all in your fix.
It worked, Amazing. Thanks again. :O)

Similar Messages

  • I have an ipad first generation.  I am trying to connect to a linksys router and it is not finding the wireless network.  what do i need to do?

    I have an ipad first generation.  I am trying to connect to a linksys router and the ipad is not finding the wireless network.  What do I need to do?  Thanks for your help.

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • HP LaserJet M1120 MFP will not print on wireless network with Windows 8.1 operating system

    The printer worked on the wireless network with Windows 8.
    I have been advised that it does not work with windows 8.1 because a driver is required. However this is not available to download.
    It is ridiculous that by having the latest operating system I am unable to use the HP printer on the wireless network
    When will HP have the driver to download?

    Check the support site here.
    http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-Drivers/HP-LaserJet-M1120-MFP-will-not-prin...
    Make sure you have the firmware update also.
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • In order to sell my macbook air I cleaned and reauthorized everything.  In rebooting to reset the original OSX (Mountain lion), it is not recognizing the wireless network and won't reboot.  Yosemite was installed prior to cleaning the machine.

    I cleaned and reauthorized my macbook air for resale.  But I had upgraded to Yosemite before deciding to sell. (I bought a new machine).  When I went to reboot it it asked for my authorization, and in order to bypass this I reset the internet connection.  Now it won't recognize the wireless internet (I tried resetting the internet and even tried signing on as guest---?! was the symbol that produced).  I did notice that when I upgraded my system, it recognized my computer as a macbook pro, not a macbook air.  I also have a pro and wonder if the wrong operating system was installed in my macbook air and that's why it's giving me grief.  I need to sell this computer and need to be able to reboot it to show.  HELP!

    You should follow these guidelines when preparing a Mac for sale:
    http://www.thesafemac.com/how-to-prepare-your-mac-for-sale/
    In your situation, try this:  Boot the MBA with the OPTION + COMMAND + R keys down.
    The result should be a display of a revolving globe.
    By following the instructions, you will be connected to the Apple servers.
    Erase the SSD and you will be able to install the original OSX, Lion.
    When completed, that should allow you to sell the unit.
    Note:  you will need a solid Internet connection.
    Ciao.

  • IPad will not send mail, but iPhone works. Outgoing servers are set up the same. I tried shutting off iPhone to not confuse the wireless network. Still doesn't work.

    Can't send mail from iPad but IPhone is sending. Outgoing servers are set up exactly the same. I closed both safari and mail on the iPhone to try and avoid conflicts with iPad. I also shut down and restarted iPad. Still won't send.

    Usually it's because you are not making internet connection via wifi.
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
     Cheers, Tom

  • This AirPort base station was unable to extend the wireless network.

    I have an AirPort Extreme in the lounge connected to BT infinity.
    I also have an airport express in the kitchen connected to a stereo system.
    I have had this set up for around 12 months.
    The airport express will not extend the wireless network.
    I reset it, restart, factory reset etc and it will work fine for around 3 days, then I get the same error message saying
    This AirPort base station was unable to extend the wireless network. Make sure the wireless network you’re trying to extend was set up and is working correctly, that you entered a matching wireless network password into this device, and that this device is in range of the wireless network.
    The express is situated easily within range of the extreme. And the airplay between those two, my iMac and two apple tv's works pretty much as it should.
    Can someone please shed some light on this?
    Maybe I have it in a wrong setting or summut....

    G Beach wrote:
    I am also experiencing a recent failure in my Airport devices no longer extending my wireless network. 
    My Aiport Express and second Airport Extreme were extending my wireless network for more than a year
    The only change that has taken place lately is that the firmware for both devices was upgraded to 7.6.4, however the upgrade was only in response to trying to resolve this problem.  Needless to say, the firmware upgrade did not resolve anything.
    If I didn't know better, I'd have thought I wrote the above. 
    I have a TC from a few years ago (last one before the tower, I think), plus the older AEBS that it replaced extending the network, plus a 1-year-old Express also extending. I had upgraded them all to 7.6.3/4 when it came out, but reverted them all to 7.6.1 when everything went crapways (others having the same issues of the LAN regularly croaking), and didn't bother upgrading again since. 
    Today I just tried 7.6.4 on all of them, and it seemed OK at first with green lights all around in Airport Utility.  Then I made one change, which was to enable 5Ghz on the main AEBS/TC only (the express doesn't need it, and the older AEBS can't do it).
    The latter two started flasing amber and giving the "unable to extend wireless network" error message.
    So I'm wondering if you are similarly using 5Ghz?

  • Airport Express (1st generation) does not reconnect to wireless network after router is cycled on/off

    Operating System: os x 10.9.1
    Airport Utility 6.3.2
    Airport Express 802.11n (1st generation)
    Linkus router: Model WRT310Nv2, Firmware Version 2.0.01
    Motorola Cable Modem: Model 2210-02, Firmware 7.7.3r5
    The Airport Express (AE) is setup to join my wireless network using Airport Utility.  A printer is connected to the AE with a USB cable.  After the setup the AE light is green and the printer can be accessed over the wireless network.
    The problem starts if the router is cycled off/on.  Now the AE will not rejoin the wireless network and there is a non-flashing amber light.  If the power to the AE is cycled off/on the AE reconnects to the wireless network.
    This is about as handy as a screen door on a submarine.
    Is it possible to see the setting of the AE the same way the modem and router settings can be accessed?   Can this issue be fixed?

    If they send you a replacement printer it will have ink tanks with it.  You can store the ink tanks from your current printer and use them later on you "new" printer if you wish.  Store them nozzle-up so they do not leak.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Group Policy to disable ability to turn off wireless networking in Windows 8.1 Update

    I am wanting to disable the ability to turn off wireless networking in our Windows 8.1 Update clients using Group Policy. We are a school that runs classroom management software enabling the teachers to view what the students have on their screens.
    Students just switch off their wireless to avoid detection. I have searched the Group Policy listings and can't find anything.
    Thanks.

    Hi  GeoffAUS,
    I can’t find a direct group policy to disable the users’ ability to turn off the wireless network in Windows 8.1.
    If we just disable the display of wireless connection, we will need to additionally disable the ability that disabling the driver in device manager.
    We could try the workaround to use UAC to control the wireless connection.
    Go to Computer Configuration->Windows Settings->Security Settings->Local Policy->Security Options, and set the option
    User Account Control: Behavior of the elevation prompt for standard users.
    Please make sure the computer automatically connect to Wireless.
    For more information, please refer to the following article.
    http://technet.microsoft.com/en-us/magazine/gg266419.aspx
    Best regards,
    Fangzhou CHEN
    Fangzhou CHEN
    TechNet Community Support

  • XML Publisher:Concurrent Prg not picking the RTF Template

    Hi All,
    We developed the rdf report and design the layout and we registred it.when we run the concurrent program program is not picking the RTF template.
    We are using the Following version.
    Oracle Apps 11.5.10
    xml pub is 5.6.2
    So please do the need ful, pleaseeeeeeee
    Thanks & Regards
    Leela

    that suggests you haven't got the setup of the data definition and/or the layout template right.
    Go into the XML Publisher administrator responsibility and select 'Data Definition'
    You need to make sure that when you create the data definition it has the same code as the concurrent program short name and application. This is the connection between the two.
    Having create the data definition, click on the 'Templates' tab and create a template. It should connect with the data Definition you have just created.
    Now upload your layout template file.
    If you have this right, then you will be able to see the layout template from the onsite setting tab.

  • File Adapter as Sender not picking the files

    We configured the File Adapter as Sender, Transport Protocol =NSF and message protocol as FCC.
    In OS we have folder to read the file, but SAP XI unable to read the file.
    To trouble shoot this issue we copied that file into another location and reverted back to the same location then XI File adaptor is able to read the file.
    Now we have compared the Attributes of the path
    the only difference in file attributes
    Coded character set ID . . . . . . . . :   819      
    CCSID 819 (decimal)
    0333 (hex)
    Name ISO 8859-1 ASCII
    Description ISO 8859-1: Latin Alphabet Number 1Latin-1 countries and regions
    Notes Related CCSID with euro is 923           
    able to read the file attributes:
    Coded character set ID . . . . . . . . :   1252                    
    CCSID 1252 (decimal)
    04E4 (hex)
    Name MS-WIN LATIN-1
    SC Co-existence/Migration
    FMS Subset
    Registration Date 
    Description MS Windows, Latin-1
    Notes CCSID for this code page with euro is 5348
    We have tried to chage the File type as Text and File Encoding with ISO-8859-1even then its not picking the files.
    Please suggest me where i am doing wrong here
    Thanks,
    Venkat.

    Hi,
    Check the file path & file name , Check  the processing mode parameter which you have set?
    Check the folder properties & provide all the permission ...
    Finally check the communication channel status in RWB, If the problem persist try to stop & start the communication channel again..
    Hope it helps...
    Regards,
    Kumar.

  • Sender file adapter is not picking the file from windows server

    Hi Experts,
    We have a sender file adapter running on Unix server. Now we have changed the source directory path from Unix to Windows in file access parameters.  It is not picking the files from windows directory and not showing any error.
    In this scenario, input file for sender adapter is *.xml and no content conversion.
    Could any one please let me know is there anything needs to changed in file adapter.
    Thanks in advance,
    Sridhar. M

    Sridhar,
    What do you have in the directory path?
    If it is a shared drive in unix then the directory in windows should also be a shared drive from XI system. Else if it is FTP check the address.
    Regards,
    ---Satish

  • Sender File adapter not picking the file ABCD.PRN extension file

    Hi
    Am doing File to Abap Proxy scenario. My source will be in text format of fixed length of fileds 7.
    My souce file will be generated by a third party machine with the extension EEE150809.PRN. In my scenario my file adapter should pick the file and update the same in ECC via a Proxy.
    I have configured the Sender File adapter with Message Protocol -  Content Conversion but file adapter is not picking the file. I have checked the Communication channel and status is fine. But the same Communication Channel works for .XML file.
    What are the parameters that I have to consider with the file extension .PRN using File adapter?
    Thanks.
    S.

    Hi Swarna,
    You dont need to worry about the extension when picking the file. You can try using EEE* so that is picks all the files starting with EEE. If you have the fixed name then you can try giving EEE150809.*. Also EEE150809.PRN should not have any issue. Try to see in sender commu ication cahnnel for anyerrors. Probably there might be some network issues or authorisation issues. If you are reading with NFS then ask them to give necessary permissions. If you are reading through FTP check the user id and pwd you are using.
    Regards,
    ---Satish

  • Report not picking the template

    Hi all,
         I built and registered a rtf template to an Oracle Report(print purchase orders), which is typically run
    while approving a PO by selecting the check box (PRINT) in the Approve Documents Form. But Its not picking the
    template instead it prints the XML Data. Do I need to call the template through the report trigger.
    In other words, How to apply rtf template for the cocurrent report w/ short name, POXPPO? Please Help.
    Thanks,
    kalyan.
    Edited by: kwin on May 21, 2010 6:22 AM

    Hi
    We had similar issue while submitting BI Publisher report from Shipping transaction form though report is associated with template and data defintion.
    To fix we need to another setup through responsibility System Administration > Concurrent Programs > Define query for concurrent program choose update and go to onsite setting tab, In template choose template in LOV after it worked with out any issues. Try similary for this issue it might work. If this doesn't work create forms personalization on approving PO call that step where you can call plsql program, in plsql program you can call template use standard API's before submitting concurrent program
    Let me know if this as worked
    Thanks
    Kamalakar.G

  • File Sender channel polling successfully  but not picking the files.

    Hi All,
                    Can any one please provide any SAP Note  Or any Alert mechanism for the  File Sender channel in case where the XI channel in polling successfully at a particular folder from Source System  but not picking the files. Thanks in Advance for the solution.

    Hello,
                  If you want to know the reason for failure in picking up the file ,You can check the MessagingSystem monitoring for the reason behind failure.
    http://host:httpport/MessagingSystem/monitor/monitor.jsp
    For Alert may be you can follow prateek instructions.
    HTH
    Rajesh

  • XI is not picking the file from source dir after exported from DEV to QA

    Hi Experts,
    We have moved one XI object from Dev to QA. It was working fine Dev but in QA XI system not picking the file from the source directory.
    I have checked Communication Channel monitoring and receiver determiniation everything is fine. But still it is not picking the file.
    Could you please help us.
    Regards
    Sowmya

    Hi
    We have used the CMS to transport XI objects. Everything has been configured automatically. I checked all the configuration and everthing seems to be fine.
    Could you please give any more suggestions.
    Regards
    Sowmya

Maybe you are looking for