W510 does not wake up when it goes into Sleep mode - Windows 7 Bit

Hi All,
The Lenovo thinkpad w510 does not want to wake up once it goes into sleep mode, I have to push the power button until it shuts down completely and then reboot it completely, I have tried different settings in the power management etc. We have the same pissue on 3 different w510`s with Windows 7 pro 64 Bit
Has anybody got a solution for this problem?
Regards,
Solved!
Go to Solution.

Hi russellwth,
Welcome To Lenovo Forums.
This issue has been solved with the latest BIOS for the W510.
Please check our Knowledge Base Article regarding this issue.
//JameZ
Check out the Community Knowledge Base for hints and tips.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
X240 | 8GB RAM | 512GB Samsung SSD

Similar Messages

OSX 10.9.1 macbook pro 13 retina - wifi does not reconnect automatically when waking up from sleep mode since I have a Bluetooth apple magicmouse

Hello,
My config is OSX 10.9.1 new macbook pro 13 retina (2014).
The wifi does not reconnect automatically when waking up from sleep mode since I have a Bluetooth apple magicmouse.
It was not the case before I bought the BT mouse.
Is this problem between Wifi and bluetooth coming from the OS?
Is there a fix already available or scheduled?
Thanks

Hello alexandrefromfrance
Check the Symptom: The network connection drops unexpectedly section for steps on what to do when your MacBook Pro does not connect after waking from sleep. I have also quoted the section on troubleshooting the issue as well.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Symptom: After restarting or waking from sleep, my computer might not connect to the Internet
After waking from sleep or starting up, your computer may not show that it is connected to a Wi-Fi network.
After start or wake, your computer may indicate that it is connected to a network, but does not connect to the Internet.
Solution
Use these steps if your computer does not automatically connect to your desired Wi-Fi network.
Check your TCP/IP settings in the Network pane of the System Preferences. Click the "Renew DHCP lease" button
Choose System Preferences from the Apple menu.
Choose Network from the View menu.
Select Wi-Fi, then click the Advanced button in the lower-left hand corner of the screen.
Click the TCP/IP tab from the top of the screen.
Click the "Renew DHCP lease" button.
Select the Wi-Fi tab and view your Preferred Networks list.
Select each network and click the minus sign to remove those networks from your Preferred Networks list.
Click OK and close the Network preferences.
Remove your stored network passwords using the Keychain Access Utility.
Open Keychain Access from /Applications/Utilities. Your window will look like this:
Remove your AirPort network passwords from the login keychain: Select the "login" keychain from the Keychain sidebar. Click the "Kind" column to order the list of keychain items by their type. Remove all entries of the kind: "AirPort network password".
Remove your AirPort network passwords from the System keychain: Select the "System" keychain from the Keychain sidebar. Click the "Kind" column to order the list of keychain items by their type. Remove all entries of the kind: "AirPort network password".  Note: The above steps will remove your Wi-Fi network passwords. If you do not know them, or if your network does not use passwords to restrict access, you should contact your network administrator.
Restart your computer.
Join your Wi-Fi network. You will need to enter your password for your network again if it requires one.
Regards,
-Norm G.

HP Officejet 4620 All-in-One Loses Connection to Wireless Network When It Goes Into Sleep Mode

My HP 4620 All-In-One wireless printer works fine until it goes into sleep mode. Once it goes into sleep mode, it doesn't wake up if a print job is sent to it. If I wake it up manually by pressing the blinking on/off button, it still doesn't print. If I completely turn it off and then on again, the print job that was queued on my computer will start printing, but that's a huge pain and waste of time nearly every time I want to print. I've installed all available updates. I also assigned a static IP address in an effort to correct this but nothing helps. I see that others have complained about this problem, but I do not see that anyone has had success resolving this. My operating system is Windows Vista. I use a Link-Sys Wireless G Router. Thanks.
This question was solved.
View Solution.

so I have called HP tech support 12 times over the last 6 weeks and still my HP Officejet 4620 loses connection overnight. Of course becasue it was a birthday present I spent more time than I normally would have on this issue. While the tech are very polite they have not fixed my problem and now it is too late to return printer to store. This is a lot of money wasted and I think they need to admit this is a bug in this printer and resolve the problem!!!!!

Updated to windows 10 and now my computer stays black when it goes into sleep mode

I just updated my computer to windows 10. Whenever it goes into sleep mode and i try to move the mouse it just stays black and i have to turn my computer off and then on again. after that it finally works but its just annoying. I already tried updating my card driver, but it said it was already up to date.

My iMac i7 quad was having the same symptoms with the blue screen and long startup times a couple of months ago. Apple Care told me to bring it in to the local Apple Store, and after some diagnostics, the hard drive required replacing. It took one day to replace the hard drive and my iMac is running great. I only had the iMac for about 12 months when the drive needed to be replaced. Not sure if that is your Mac's problem, but it was for mine.

IMac taking ten minutes to start up and sits at a blue screen for the most of the time. Also, when it goes into sleep mode I am unable to wake it up from it.

For the past few days now whenever I go to turn on my iMac it takes roughly ten or more minutes to boot up. For the portion of this time it sits on a blank blue screen. At first it comes up to a plain white screen which after about 30 seconds has the apple logo on it and the spinning circle for about a minute then to the blue screen, every time. Then, to top it off right when this started happening another problem began occurring. The computer is set to go into sleep mode after 15 minutes of no use. But, if it is in sleep mode for too long I am unable to get it out and I have to restart the entire computer, but if it is just for a few seconds into sleep or a minute I am able to get the screen to come back. I can still here the fan running and such so I don't know what is going on. I have searched through discussion after discussion. I have tried: repairing disks, repairing permissions, starting up in safe mode, and such. There has been no luck so far. I was wondering if anyone could offer insight into fixing at least one of these problems since my schooling relies on the computer.
By the way I this is an iMac 10.6.4 refurbished which we just bought about two weeks ago.
Thanks for any suggestions!

My iMac i7 quad was having the same symptoms with the blue screen and long startup times a couple of months ago. Apple Care told me to bring it in to the local Apple Store, and after some diagnostics, the hard drive required replacing. It took one day to replace the hard drive and my iMac is running great. I only had the iMac for about 12 months when the drive needed to be replaced. Not sure if that is your Mac's problem, but it was for mine.

Internet not working after MAC book goes into sleep mode

If my mac book goes to sleep or if i close it when i wake it up/open it the internet doesnt work, usually have to restart it or wait several minutes in order for the internet to come back any way to fix this problem?

Safari, Firefox will all open up; we're talking specifically about airport. It will not automatically connect to my home's wireless network once I wake it from sleep. Actually it will not even pick up or recognize any other close by networks. When you click on the airport symbol to get the drop down menu, the only option that is there is 'other'.
Once I wake it, I will leave it there for about ten minutes and when I come back it has finally picked up the other networks and I am able to connect to my home's wireless network.

HP pavillion Elite HPE-541F ... system will not start and monitor keeps going into sleep mode

Good Morning:
Having an issue with my Hp Pavilion Elite HPE-541F and Monitor HP2311x
Yesterday, thinking I was updating Java ... clicked on it and agreed to things being allowed on computer ... started adding icons to my desktop .... then pop ups kept coming up to register etc ... I assumed that something was wrong so I attempted to restore system to previous ... since then my system will not boot up ... will say "starting windows" and I can hear the fans working but thats it ... second part of the issue is that the monitor keeps going to sleep, so even if I try to restart the computer in "safe" mode or anything else monitor goes to sleep and there's nothing on the screen so don't know if anything is doing anything .... Very sorry I'm also not very tech savy with computers ... just trying to save time and money before I have to bring system to computer repair person .... Any help would be appreciated .... Thanks so very much

I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at
http://h30499.www3.hp.com/t5/Business-PCs-Compaq-Elite-Pro/bd-p/bsc-271
and for the monitor:
http://h30499.www3.hp.com/t5/Monitors-Experts-Online-Now/bd-p/bsc-1255
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Can't wake mini after it goes into sleep mode

Hi, My mac mini 2010 model will not wake from sleep mode. The computer also shuts down by itself if left on overnight.
Any ideas?

Try following the following steps to reset your Mac mini's System Management Controller (SMC), the electronics on your logic board which control your computer's power state (see http://support.apple.com/kb/HT3964):
Shut down the Mac mini.
Unplug its power cord and wait 15 seconds.
Reconnect and wait 5 seconds.
Switch the Mac mini on.
If that does not solve the problem, there are a few possibilities:
1) I know it's obvious, but have you checked that "Schedule..." in Energy Saver Preferences is not accidentally set to shut down?
2) What is the power supply to the Mac mini's power adapter like? I have seen a few rare instances where power supply issues can cause the SMC to get confused in these cases. You could try using a known-good power supply and/or swapping to a less loaded power socket. I know it sounds unlikely, but I have seen at least one occasion where this solved strange sleep/wake behaviours of Minis.
3) Finally, the worst case is that your logic board is faulty.
If you've done all of the above and have no luck, bring your Mac mini and its power adapter to your local Apple Authorised Service Provider or Apple Store for hardware diagnostics.

How do I wake up the tablet on a HP Photosmart eStn C510 printer when it goes into sleep mode.

I have tried to wake up my tablet attachment and it won't wake up. I have tried on/off switch and pressing the home/and the other 2 buttons beside the home button but still won't come on. This happened once before and somehow got it to wake up. This happens when printer sits idle for a long time. I try to press the home button every now and then to keep active.

Hello bburkholder,
I would suggest following the document at the link below. It sounds like you have done some of the steps within the document, but the other steps may provide you a solution.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02844556&tmp_task=solveCategory&cc=us&dlc=en&la...
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

IPhone 3gs wont turn back on once it goes into sleep mode!

2 days ago my iPhone 3gs (OS 6.0.1) has gone completely wacko on me and i'm completely frustrated! I have my phone set to have the screen shut off after 5 minutes. Usually, to just reaccess the phone I just simply hit the home button. Now, if I let it go into sleep mode, the phone WILL NOT come back on! I went online and did some research, and it suggested holding the home button and the sleep button for 10 seconds to get it to come back on. It works most times, but sometimes it takes a few tries to get it to come back on, and when it does come back on it takes forever to load up. But the whole thing happens all over again when it goes into sleep mode. My phone is fine as long as I set it to never go into sleep mode, but it is killing my battery. I need to be able to put it into sleep mode as I have to be able to go all day without charging it at my job. PLEASE help...I don't know what's going on with it. I have never done anything to it (jailbreaking, illegal stuff, etc.) and I do all the updates that it asks to do.
Please please help!
Jennifer.

If you actually see a "6" error code, here's what it means. Disable your anti-virus and/or firewall.
Errors related to third-party security software
Error 2, 4 (or -4), 6, 1000, 9006
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
Restore your device while connected to a different network.
Restore using a different computer.

HP Envy shutting down after going into sleep mode

Hi. I'm not sure where to post this so I'll try it here.
My laptop shut downs automatically when it goes into sleep mode. Not right away when going into sleep mode. Maybe like an hour later after going into sleep mode.
I'm not sure it's overheating because it never shuts down while I'm actually using the laptop.
Do you guy have any idea how to fix this?
Product name and number: HP ENVY TouchSmart Sleekbook 4-1115dx
Operating System: Window 8
Error Message: None
Any changes to your system before problem occurred: No

Hey Tecmo_SB_Guy,
I would suggest you take a look at advanced power settings. It can seem like the notebook is turning off when it is actually just hibernating. You can set it to not hibernate.
1. Windows key + Q to open the Search Bar
2. Type "power"
3. Click Settings under the Search Bar
4. Select Power Options from the results on the left.
5. In Power Options, Click Change when the computer sleeps, on the left.
6. Set the Put the computer to sleep setting so that it fits your usage best.
7. Click Change advanced power settings, at the bottom.
8. Expand Sleep and expand Hibernate after. If you want you can change the hibernation setting to Never by typing "Never" into the minutes field. See attached picture. You can do this for battery and/or plugged in.
9. Click Apply to save changes.
If you don't already shut it down periodically, I would suggest shutting it down at least 2-3 times a week if you use it daily. Leaving the computer running continuously can shorten its lifespan. Hard drive failures and motherboard issues are seen much more often on machines that are left running constantly. Computers get bogged down and run slowly when the memory is full. Memory only clears out and resets itself when the computer is shut down. Here is a link explaining more about memory accumulation and hardware aging.
I hope these suggestions help! Please let me know if you have any questions
Attachments:
PowerHibernateNever.jpg ‏59 KB

Since yesterday I am facing problem,when it goes in sleep mode it actually turn off and does not come up after pressing start button but every time I have to hard reset it.It is 4 gen running on 4.3.3

Since yesterday I am facing problem,when it goes in sleep mode it actually turn off and does not come up after pressing start button but every time I have to hard reset it to turn it on .It is 4 gen running on 4.3.3.Please help

so I have called HP tech support 12 times over the last 6 weeks and still my HP Officejet 4620 loses connection overnight. Of course becasue it was a birthday present I spent more time than I normally would have on this issue. While the tech are very polite they have not fixed my problem and now it is too late to return printer to store. This is a lot of money wasted and I think they need to admit this is a bug in this printer and resolve the problem!!!!!

Monitor goes into sleep mode and will not wake up

My monitor goes to sleep and will not wake up. I try powering off and that will not respond. I have to unplug the workstation and start back up. I have turn off sleep to never sleep and now it just goes to sleep when Im working.

Hello @rosendahl14,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how your monitor goes into sleep mode and will not wake up, and I would be happy to assist you in this matter!
To rule out any sleep mode issues with the monitor, I am providing you with some steps you can try below:
Step 1. Unplug the power cord from the back of the monitor and the wall
Step 2. Hold the power button down for at least one minute
Step 3. Plug the power cord back into the monitor and then into the wall outlet (not a power bar or surge protector)
Step 4. Press the Menu button on the monitor
Step 5. Navigate to the Factory Reset option and select it
Step 6. Try a different cable connecting your monitor to your computer
If the above steps did not resolve your issue you can try the monitor on a computer or other device to see if the issue persists. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
To further diagnose a possible hibernation issue with your desktop, I recommend following the steps in this document on Troubleshooting sleep and hibernate issues (Windows 7). I also recommend following the steps below to reset your system's power management settings:
Step 1. Click the Start button
Step 2. In the search box, type "Command Prompt"
Step 3. Right-click Command Prompt
Step 4. Click Run as administrator
Step 5. At the command prompt, type powercfg /restoredefaultschemes and press Enter
reference: http://superuser.com/questions/669571/windows-8-1-64-bit-power-schemes-gone
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Why does my macBook PRO OS 10.9 reboot when it goes to sleep mode?

12.10.13
whenever my MacBook PRO [2012] goes into Sleep Mode, the computer reboots. started to happen AFTER installing Mavericks/OS 10.9. what is going on?

Sleep – Slow Wakeup/Requires Reset

Apple tv loses home sharing when my computer goes into sleep mode

Just recently, my Apple TV says that home sharing is off when my computer goes into sleep mode. It never used to do that - any suggestions?

I have the same problem here. Always back-ed up with Time Machine (OSX 10.9 Mavericks) to Western Digital drives. MyBooks, MyPassport 1TB (USB 3.0), all works fine. Time Machine is actually doing back-ups overnight. Since I got this new 2TB MyPassport Ultra USB 3.0 it's working perfect during days, but every morning when I wake up the MacBook from sleep, I get this annoying error:
Time Machine couldn’t complete the backup to “MyPassportUltra”.
Unable to complete backup. An error occurred while creating the backup folder.
Latest successful backup: Today, 02:27 am
I'm also not able to write anything to that drive, or unmount it. It stil shows up in Finder, and I'm able to read all the data perfectly fine. When I do a Disk Utility Verify Disk directly after, I get this:
Checking volume
disk3s2: Scan for Volume Headers
Invalid Volume Header @ 0: I/O error
Invalid Volume Header @ 2000021315072: I/O error
disk3s2 is not a CoreStorage volume
Error: This disk needs to be repaired. Click Repair Disk.
I don't click Repair Disk, as this will probably screw up my partition. Instead, I have to unplug the USB cable (which is bad for the drive, there's no time to park the drive's heads) and plug it in again. After clicking Backup Now, Time Machine immediately starts backing up, and the drive works fine the rest of the day.
I contacted WD Support, and they are sending me a booster USB cable. As System Information reports, the drive receives enough power though:
Current Available (mA): 900
Current Required (mA): 224
Unfortunately there's no firmware update for this drive, which will probably fix this. See this topic: https://discussions.apple.com/thread/4196704.

W510 does not wake up when it goes into Sleep mode - Windows 7 Bit

Similar Messages

Maybe you are looking for