W510 high pitched whistle noise problem

I must tell that I am very dissapointed of the laptop.
The hard died 2 weeks after I bought it (about month ago)
Still from the beginning I have had that problem with the noise …
W510 makes the high pitched whistle noises,  when running on battery power. Very anoying. When the laptop is connected to AC adapter, everythng is ok, the noise is gone.
I'm only wondering, that even notebooks in this price class are not as good as I expected. I think, for 2000 € you can expect a notebook without this noise.
Do you know how to solve this?
Solved!
Go to Solution.

The problem is with the CPU itself. From what I was told by the Lenovo Service Center Singapore, the high pitched is caused by power management, voltage regulator, the Intel Core i processor was designed to be like this.
Although they are documentations being made too by Dell regarding Intel Core i processor high pitched issue, I myself also was disappointed because I have used the machines for 2 months then this problem came out.
The only workaround method is to disable Power Management from BIOS, which disable the cause of high pitched issue, but hurts battery life. You either live or die with it.
Best Regards
Peter
Moderator edit by bananaman: Removed section not in compliance with the Community Rules.

Similar Messages

  • Any reports of a high pitch whistling?

    Hi,
    I've just a new High Res 15.2" delivered.
    I'm really pleased with the display, the new battery life, the keyboard etc but there is a constant high pitched whistling noise, I can't locate the exact position but it sounds like it's coming from behind the superdrive (again, I could be wrong).
    Nothing seems to adjust the volume or pitch, it's just constant, from the instant the power is switched on.
    The AC doesn't affect it, the screen brightness doesn't affect it, use of the HD doesn't affect it, it's just constantly there.
    Any suggestions of what it might be, is it something we've seen as a group before?. I don't partcularly want to send my brand new PB back, then again, I don't want to get stuck with this, I think it would adversely affect my health (and sanity) if I was using it for 15 hours a day. Although as I'm typing this I've also just noticed it has that keyboard chirping problem. Why is powerbook quality so low, my old TiBook was brilliant, as was my 12" iBook. My last powerbook dropped to bits and this one hasn't even got through the first day.
    Andrew

    Hi Andrew, there are a lot of us experiencing the same problems as you. I have a 15" PowerBook and it makes loads of horrible noises and i wish i never bought it. A lot of the time i prefer to use my iMac because the PowerBook just annoys me to much.
    I not sure about the whining sound but the chirping keys seems to be linked to the processor by all accounts. I get the chirping generally using Safari. A lot of these issues can normally be resolved by installing CHUD tools and in the procesor pane, disable the 'allow nap' option. But like me your probably thinking, i've just spent a small fortune, why should i?????
    If i was in your position i would return the powerbook while you still can because Apple aftersales is a nightmare, I'd probably be inclined to sit on the cash and see how the intel macs pan out.
    Also, i read the other day that theres news of a widescreen iBook on the horizon, powered by Intel so no doubt it will be much faster than our powerPC powerbooks and a lot cheaper.
    Regards
    Mike

  • Nokia 6300 high pitched whistling feedback noise d...

    I am now on my fourth Nokia 6300 having returned the previous three because of the same high pitched whistling or feedback noise during a call. I have also tried updating my SIM card (a genius at Vodafone came up with that idea) and still the same problem.
    I know of a couple of people with the same phone and no problems, so I can only suppose it is something to do with the Vodafone software.
    I would be happy to try updating or re-loading the software but cannot find it anywhere?
    I really like everything else about this phone so any helpful suggestions would be appreciated!

    I also recently upgraded my wonderful 6233 with a 6300. The ear-piece of the first one I got produced a constant buzz during calls. Returned it, got a new one on the spot. After a few days, I started having complaints about my audio at the other end; the symptom was a very high noise level (coming from my end) together with echo (the caller would hear their voice echoed back). I had also started noticing a distorted low-level replica of my own voice present at the ear-piece. The first thing that came to mind was "oh no, another replacement!". Being a bit of an inquisitive mind though, I decided to debug this a bid further. So I browsed the web, and among other things came across this thread. The turning point was correlating the problem with reports of Bluetooth incompatibility from various users right and left; as it turns out, the 6300 appears to have a serious Bluetooth "problem". To make a long story short, the situation is as follows. After the phone is turned on, all is well: audio at the other end is perfect (no noise, no echo). Then I turn on my Motorola H700 head-set. Call the phone from a land-line, and yes, the noise level is high as hell; the mic gain is turned up so much that you can whisper a couple of meters away and hear yourself just fine on the other end! Here comes the catch: turn off the Bluetooth head-set, and surprise-surprise, the problem is still there with the built-in mic; turning off and on the phone cures it. But wait, this doesn't happen always. Sometimes the mic level goes back to what it was before, and the phone is working fine once more, without power-cycling.
    That's more or less it; I hope it rings a bell with someone reading these lines, and hopefully it gets fixed in a future firmware revision. In the meantime, I need a new Bluetooth head-set...

  • High pitched whistle/bleeping noise?

    Hello,
    I have recently noticed that my 2.4GHz 20" Imac is emitting a high pitched whistle every few minutes when I'm working. It's essentially a short 3 second electronic whistle or bleeping noise and is now happening literally every minute or so as I work. It's becoming quite irritating to say the least!
    Does anyone know what this is, or how I can stop it from happening?
    Many thanks in advance for your advice.

    I would say it's probably from the hard drive, once they get to a certain percentage full they tend to make more noise due to additional activity.

  • High pitch whine noise from speakers and other issues

    I just got a 2010 Mac Mini and transferred all of my data and apps and accessories from my old Mac Mini which was running 10.6.4 (2007 I think). One of the accessories is a Griffin Firewave. I had to get a new firewire cable to attach the Firewave since the new Mac Mini has a firewire 800 port. On the old Mac it worked great, I was able to run 5.1 speakers with no problem. With the new Mac things aren't so nice. I get a high pitch whine through the speakers. The whine will go up and down in volume with the volume control on my sound system (Klipsch Promedia 5.1 Ultra) as well as with the Mac volume control. I can increase the gain in the Firewave app which will increase the volume of what I want to hear without increasing the volume of the whine, however it will cause the audio I want to hear to distort. The other issue I have is that when I put the Mac to sleep it seems to cut all power to the firewire port, causing the Firewave to turn off and lose its settings. I believe this to be a bad design on the Firewave's part but the old Mac did not shut off the power to the firewire port when going to sleep so this was not an issue. So my questions are, does anyone else have problems with external sound cards having a high pitch whine noise and is there a way to prevent the firewire port from turning off when the Mac sleeps?
    BTW, I have tried reinstalling the Firewave driver (several times) and I've unplugged and re-plugged the firewire cable at both ends. I have both the Mac and the sound system plugged into a line conditioner so I doubt it's dirty power. I do realize that the Firewave only claims support up to 10.5 but it was working without issue on the old Mac Mini on 10.6

    I have the same problem. I have an early 2009 Mac mini and get the whiny noise from my powered speakers. The volume of the whine noise tends to change smoothly up or down, and often does a stuttering effect along with it. It stays there for up to a minute or so and then eventually goes away. It always seems to happen at random times.
    I've heard this same sound effect coming from a podcast that I was listening to on my iPod Touch. It seems that the interviewer was recording from a Mac mini as well, though not sure. The sound in the recording was exactly like what I hear coming from my Mac mini. I often thought that this was a problem with my speaker system, but was surprised to find that others are experiencing the same kind of issues.

  • High pitch whistle then died

    I've had my 9300 for around a year and a half with no problems at all. Yesterday, I was charging up and then noticed the high pitch whistle sound (for the first time with my own phone) and noticed my phone had died. I've popped the battery multiple times, even trying a second battery with no luck. Each time I place the battery in (without being plugged in to the charger) and I get the high pitch sound for just a second until the battery is completely in. There was also no electricity surge or anything like that with the plug and charger.
    Can it be saved easily? 

    Hi LashKelly,
    Try backing up your device via the BlackBerry Desktop Software and performing a clean reload of your device software. http://bbry.lv/bpv7DT Make sure to test to make sure the whistling issue is no loger there before restoring any data from your backup file.
    Hope this helps.
    -FS
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

  • High pitch fan noise

    my 560 hawk is now making a high pitch fan noise. It has'nt done this before,  It generally doese this around 68 to 72 percent. Not at any other time. Has anyone else had this problem?

    when I just run afterburner and run the fan speed to 72 percent it makes the frequency noise. Its not under any load and may be normal I just wonder if anyone else had this too.. Its barely noticable. I just noticed it and I've had the card for a few weeks.lol

  • High pitched squeal noise and low end rumble RME Fireface 800 Macbook pro 2011

    Hi there,
    I just updated Mac OSX Snow Leopard and my Fireface 800 has started emitting a high pitched squealing noise when turned on and connected via Firewire 800 cable.
    Also my 17" Macbook pro requested a hard reset last week for the first time, after this problem began.
    When my subwoofer is connected, a low end rumble is emitted at the same time as the squeal, and persists until turned off and on again.
    Any ideas?
    Thanks
    Robin

    Hi there,
    I just updated Mac OSX Snow Leopard and my Fireface 800 has started emitting a high pitched squealing noise when turned on and connected via Firewire 800 cable.
    Also my 17" Macbook pro requested a hard reset last week for the first time, after this problem began.
    When my subwoofer is connected, a low end rumble is emitted at the same time as the squeal, and persists until turned off and on again.
    Any ideas?
    Thanks
    Robin

  • High pitched beeping noise

    I have recently purchased a 60 gig iPod and whenever I try to listen to music or watch a video that I did not purchase from iTunes a very loud, very high pitched beeping noise accompanies it and pretty much drowns out the rest of my music. The beeping is incesant and does not stop throughout the whole track. This did not happen with the iPod nano that I used to own and it only happens on music that I did not purchase on iTunes or did not transfer via cd. I have had most of this music on my computer for a very long time. Is there a way to fix this without burning over 500 songs to cd. If so please tell me, it would be greatly appreciated.
    Windows XP

    you are the second person to tell me that it's a hard drive problem. i'm starting to think that that is the problem. it really hasn't done that with other programs, but it does very rarely. i have the upgraded hard drive for the macbook pro. if i were to have it replaced, would it cost a lot? i'm still in the one-year warranty by about 20 days. do i just take it to an apple store and they will fix it?

  • Pre has a high pitched ringing noise while on touchstone

    Every time I set my Pre on the touchstone, the second it starts charging it has this high pitched ringing noise, like the kind older people lose the ability to hear. Is there any way I can get this to quit?
    Post relates to: Pre p100eww (Sprint)

    Same problem here. At first I thought it was the touchstone, but it seems like it is coming straight from the Pre. Turning down the volume on the speaker does nothing. Turning up the volume works though - when you are playing music! ;-)

  • Satellite A660/15J High-Pitched Whining Noise

    I have had a Satellite A660/15J for 3 months, running 64-bit Windows 7. The machine emits a constant high-pitched whining noise (rather like the sound emitted by early CRT television sets). The source of the noise appears to be the CPU (it is definitely not the cooling fan or the HDD). Is this a well-known problem? If so, how do I make it stop?

    Since when do you notice this behavior?
    I can only say that friend of me has Satellite A660 but without any strange noises. The notebook is quiet, only the fan makes some noises if its running.
    For me it sounds like a hardware malfunction but before you contact an authorized service provider you can try to solve it yourself by updating the BIOS. This can be found on official Toshiba website.
    If it doesnt help I would contact the ASP. The guys can answer you if its normal behavior or not.

  • IPod making high pitched buzzing noise

    I've had my iPod over two years now, maybe three but it's always worked and hasn't had any problems. The other day I connected it to a cheap second hand Pod station that a friend had been lent. The pod station wouldn't play my iPod and nothing much happened so I resolved that my iPod was just too old to work on it and took it back out again. When I tried to turn on my iPod afterwards it wouldn't do anything so I thought that the battery had probably just been drained out and it would be fine when I took it home and connected it to my computer.
    However when I did so the iPod did not appear on the desktop or in iTunes and the screen remained blank. I kept trying but the same would continue to happen and I began to notice that now whenever I plug in the iPod a very high pitched buzzing noise comes from the iPod which scares me a little as it's so unusual. I have tried resetting and pretty much all of the suggested solutions on the apple site and in other discussions but none work. Nothing seems to work and the iPod does absolutely nothing. Is there anything at all that I can do or does this mean that my iPod has simply finally had it?
    I wouldn't have thought that just a cheap Pod station would be enough to cause such a major problem with it.
    Any help would be very much appreciated please!

    If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
    http://docs.info.apple.com/article.html?artnum=60983
    If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
    Make sure you do all the following “TRYs”
    A. Try to wait 30 minutes while iPod is charging.
    B. Try another FireWire or USB through Dock Connector cable.
    C. Try another FireWire or USB port on your computer .
    D. Try to disconnect all devices from your computer's FireWire and USB ports.
    E. Try to download and install the latest version of iPod software and iTunes
    http://www.apple.com/itunes/download/
    For old and other versions of iPod updater for window you can get here
    http://www.ipodwizard.net/showthread.php?t=7369
    F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
    http://www.apple.com/support/ipod/five_rs/
    G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
    http://docs.info.apple.com/article.html?artnum=93651
    If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
    Intermediate Level
    A. Try to connect your iPod with another computer with the iPod updater pre-installed.
    B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
    For Mac computer
    1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
    2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
    3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
    4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
    5. Eject your iPod and do a Reset
    6. Open the iTunes 7 and click “Restore”
    For Window computer
    Go to folder “My Computer”
    Hope you can see your iPod there and right click on the iPod
    Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
    Now select “Format”
    Eject your iPod and do a Reset
    Open the iTunes 7 and click “Restore”
    In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
    http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
    C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
    Tips
    a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
    b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
    c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
    http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921
    Advance Level
    A. Diagnostic mode solution
    If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
    You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
    Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
    iPod 1G to 3G: "Menu" and "Play/Pause"
    iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
    The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
    iPod 1G to 3G: "REW", "FFW" and "Select"
    iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
    You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
    Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
    B. Format your iPod with a start disk
    I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
    If none of these steps address the issue, your iPod may need to be repaired.
    Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
    Or visit your local Apple Retail Store http://www.apple.com/retail/
    In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ or ifixit at your own risk
    http://www.ipodresq.com/index.php
    http://www.ifixit.com/
    http://www.rapidrepair.com/shop/g4-ipod-parts.html
    Just in case that you are at the following situation
    Your iPod warranty is expired
    You don’t want to pay any service charges
    You are prepared to buy a new one
    You can’t accept the re-sell value of your broken iPod
    Rather than leave your iPod as paper-weight or throw it away.
    You can try the following, but again, only do it as your last resort and at your own risk.
    Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
    Last Resort Level
    1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
    In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
    http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
    2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
    http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
    Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
    2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
    Exclamation point and folder and nothing else
    Spank your iPod
    http://www.youtube.com/watch?v=3ljPhrFUaOY
    http://discussions.apple.com/thread.jspa?messageID=3597173#3597173
    Exclamation point and folder and nothing else
    http://discussions.apple.com/thread.jspa?messageID=2831962#2831962
    What should I do with my iPod? Send it or keep it?
    http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
    Strange error on iPod (probably death)
    http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
    Sad Face on iPod for no apparent reason
    http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
    Meeting the Sad iPod icon
    http://askpang.typepad.com/relevanthistory/2004/11/meeting_thesad.html#comment-10519524
    Sad faced iPod, but my computer won’t recognize it?
    http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
    iPod Photo: unhappy icon + warranty question
    http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
    4th Gen iPod Users - are we all having the same problem?
    http://discussions.apple.com/message.jspa?messageID=2235623#2235623
    Low Battery, and clicking sounds
    http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
    Sad faced iPod, but my computer won’t recognize it
    http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
    Sad iPod solution
    http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
    Re: try to restore ipod and it says "can't mount ipod"
    http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
    iPod making clicking noise and is frozen
    http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
    Cant put it into disk mode
    http://discussions.apple.com/thread.jspa?messageID=3786084#3786084
    I think my iPod just died its final death
    http://discussions.apple.com/thread.jspa?messageID=3813051
    Apple logo & monochrome battery stay
    http://discussions.apple.com/thread.jspa?messageID=3827167#3827167
    My iPod ism’t resetting and isn’t being read by my computer
    http://discussions.apple.com/thread.jspa?messageID=4489387#4489387
    I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.
    Finally, I read a fair comments from dwb, regarding of slapping the back of the iPod multiple times
    Quote “This has been discussed numerous times as a 'fix'. It does work, at least for a while. In fact I remember using the same basic trick to revive Seagate and Quantam drives back in the mid to late 1980's. Why these tiny hard drives go bad I don't know - could be the actuator gets stuck in place or misaligned. Could be the platter gets stuck or the motor gets stuck. 'Stiction' was a problem for drives back in the 80's. Unfortunately the fix can cause damage to the platter so we temporarily fix one problem by creating another. But I know of two instances where a little slap onto the table revived the iPods and they are still worked a year or more later.”UnQuote

  • High pitch whine/noise coming from 880G-E45 when PC is off

    I just recently built a PC with the 880G-E45 motherboard without any major hiccups except for the fact that my PC makes high pitch whine noise (similar to a charging flash bulb on a camera) whenever it is powered off. When the PC is on and just after the PC is turned off, there is no high pitch whine at all.
    From what I can tell, the noise is not coming from the CPU, but the corner of the motherboard where the 3 LED-lit RESET, CLEAR CMOS, and POWER buttons are. I eliminated all other components of the PC by only powering them one by one and whenever the 24-pin ATX power cable is plugged in, the high pitch whine noise would be made.
    Is there anything I can do to silence this noise or is this normal for this motherboard? This is a problem since the PC is for my room which is very small and while i can't hear it during all the activities of the day, in the dead of night, it is loud enough to keep me awake. The only shorthand solution was to switch off the power on the PSU (BTW, will this damage my PC if I do this too much?).
    Here are my specs:
    -AMD Athlon Phenom II X4 840
    -880G-E45
    -BIOS: A7576AM3 V3.10
    -Samsung 1TB sata drive
    -Corsair CX430 V2 430w
    -Kingston HyperX Blu 4x2GB
    -Win7 x64

    Quote
    I'm guessing the power being output by the PSU is too much.
    Nonsense, the PC will only draw as much power from the PSU as it needs, not the other way around.
    Evidently, the CX430W is somehow faulty. Contact your retailer, or Corsair directly, and see if they will replace it for you.

  • High Pitch Electrical Noise

    My pc has developed that high pitch electrical noise that some other people have mentioned on this forum.  I have read in other posts that touching some thorroids can help to identify the source of the noise.  Could someone post a picture of the Nforce4 K8n Platinum board identifying these thorroids because I have no clue where they are.
    Cheers,
    Dubcat.

    I have noticed that the noise does not start until i hit the windows xp login screen - what could possibly be causing this?  It's doing my head in :(

  • N97 mini High pitched whistle

    Hi, Recently got a n97mini, and notice a really high pitched whistle arorund the 15-22khz range coming from the head set. From what I think this may be due to the inverter for the backlight, as when the phone goes into "keygaurd"  and the lights go off the sound stops, the sound is even more prevalint when using it to make a call as it a lot closer to your ear
    Any one notice this and should i just swap my phone and try another

    I got my phone in late April and have just had this issue appear on my handset now; it wasn't doing it before but it randomly started happening the other day. Has anyone been able to get theirs successfully repaired or exchanged? Considering the scope of this issue i have my doubts that it can be fixed... Replacing the display will likely result in the same sound returning at some point in the future, i have a feeling this is a design flaw or the result of using poor quality materials. I don't want to part with my handset for 2 - 3 weeks getting the display replaced only to find that 6 - 7 weeks later the sound comes back If it's harmless i guess i can live with it; i just dont want the display burning out or something!
    If others have this issue or have successfully had the issue resolved i'd love to hear from you!

Maybe you are looking for

  • New ichat effects not working in photo booth?

    I recently just downloaded the iChat Effects 2.0.4 for my new MBP and it works fine in ichat. But, when i try and take a picture using one of the effects in photo booth it comes out pink and white. does anyone know how to fix it??

  • I cannot sync my laptop with the iPad after update.

    After updating my iPad I can no longer sync it with my computer. Before the update I could sync music pictures etc. my computer says the iPad has an invalid signature. Any suggestions on how I can fix this.

  • Rules Engine - Updating JavaFact's

    Hi. We have started building some rules against a single JavaFact class. Around half way through building the rules we realised that a new 'business function' was required in the JavaFact. I can not find any way of updating the JavaFact without actua

  • Enum operator overloads not called

    Hi, we are faced with a serious problem of the current Forte C++ compiler version (WS6U2 with actual patches). The following test program shows that the compiler does not accept operator overloads for enums. Instead of this all enums are implicitly c

  • If my SLD is down will webdynpro apps fail.

    I see that the SLD manages the JCO connections to R/3.  Does the engine maintain that data locally as well or if the SLD is down then the webdynpro app utilizing the JCO connection is down as well.