[W510] Missing driver for SCSIADAPTER

Hi!
My Thinvatage Tool is warning me of a missing decive driver. The Device is called "ADZBKF8F IDE Controller".
Looking into the device details I found out the it is an SCSI Adapter. I could not find a driver for this, nor could windows do. Wehre can I get the driver for this?
Further Info:
W510 4389-W1B
Original Windows 7 Installation

Try reinstalling Daemon Tools?

Similar Messages

Missing driver for Tecra A11

Hello,
I have a Toshiba laptop, model Tecra A11, part No. PTSE3U-05Q01P
I have an issue with the operating system, Windows XP SP3, it doesn't recognize a device from the laptop and shows the Hardware wizard from Windows XP.
The computer worked without problem since the purchase but now ocurred this issue.
We have tried the automatic install provided by Windows with no avail. Windows didn't install the driver.
In the Windows device manager, we see a device with a exclamation mark, as "Unknown device".
In the properties dialog of such device, Windows reports that it have no driver installed.
In the Details tab, the system shows de Device Instance ID: ACPI\IFX0102\4&375529C7&0
In the Toshiba website, in the support section, there are many available downloads, but we don't know which file is the required to solve the problem.
Thanks for any help you can give me.
Best regards,
Carlos
Attachments:
Toshiba_problem02.jpg ‏62 KB
Toshiba_problem03.jpg ‏65 KB
Toshiba_problem04.jpg ‏147 KB
Toshiba_problem04.jpg ‏147 KB

Tecra A11 (PTSE3U-05Q01P)
Has essentially the same spec as this model: Tecra A11-S3540 (PTSE3U-00R00G)
Downloads here.
My guess is that you are missing one of these - maybe both.
TPM Driver for Windows XP
Infineon TPM Software Professional Package for Windows XP/Vista/7 (32/64)
Isn't it time to upgrade to Windows 7?
-Jerry

Win 7 RC missing driver for HDSPA erricsson f3507g

I have just made a upgrade of my W500-4063-B18 to windows 7RC, 32bit. I have no driver for my HDSPA modem, anyone there have found a solution??
Borgmesteren

"the application was not build for this platform"
This means that one of two drivers are missing.
I think it's the System interface driver, found here:
http://www-307.ibm.com/pc/support/site.wss/WIN7-BETA.html#sid
If that's not right its this one:
http://www-307.ibm.com/pc/support/site.wss/WIN7-BETA.html#tpmd
Thinkpad power management driver.
Had the same problem myself

Missing driver for Z230 WorkStation?

Hi,
Now its on again...
Does anyone know the correct driver for:
PCI\VEN_8086&DEV_153A&SUBSYS_1905103C&REV_05\3&11583659&0&C8
Hope you are able to help!
Thanks,
Allan

Hi:
See if this driver works...first or second file depending on bit version.
https://downloadcenter.intel.com/download/23071/Network-Adapter-Driver-for-Windows-8-1-

Missing Driver For Video Controller

my laptop's model no. is toshiba satellite pro l510. I have windows 7 installed in my laptop . my videos on my laptop was working fine till yesterday but sudeenly my vlc crashed and other video players were also crashing so i tried to update the display driver but couldn't so i unistalled it . But now i'm trying to reinstall it but the driver is not installing . also in the device manager i am unable to find the display adapter icon. and i'm getting a yellow colour icon in my other devices option in the device manager saying video controller (vga compatible)when i'm double clicking it , it says "The drivers for this device are not installed. (Code 28)Data error (cyclic redundancy check).
To find a driver for this device, click Update Driver" i'm not able to find the right drivers for my laptop . alll the drivers i've downloaded are not installing or hasn't heldped. plzz help..

The CRC mismatch error means a system file or a registry entry doesnt match what windows or the driver is expecting. In some cases a simple chkdsk or a registry cleaner will solve the problem and in some cases a full restore is needed. Click the start button.Right click my computer.Select Properties -> Tools -> Check Now -> Start -> Schedule Disk Check -> Next Boot -> Restart PC I would also advise running a registry cleaner like ccleaner to check for errors.http://www.piriform.com/ccleaner Regsitry Tab -> Scan For Issues -> Wait until done -> Fix Selected Issues. While you are in there you should go ahead and run the regular cleaner to, but thats up to you.Cleaner -> Run Cleaner

Missing Driver for Epson PictureMate 500

Can someone help me? I've recently crossed over from Windows and while delighted I made the move I still can't print my photos. I've gone onto the EPSON website, downloaded the correct installer (epson11775.dmg) and run it. But when I then connect the printer and run iPhoto it can't find the correct printer driver. I'm looking under EPSON, Epson PM... but "Epson PM 500" isn't there? What am I doing wrong - where can I locate the driver that the installation software installed?

Hi Jamie
It's not often you even need to install a driver for Mac.
Normal procedure is, physically connect the printer to the USB port, switch it on.
Open Printer Setup Utility (found in Applications/Utilities), click Add
You are then shown the Printer already selected, and the driver for it that came with the Mac is automatically loaded. Press OK and you're done.
That's what I would have done first. However to again install the driver, which would be updating the existing one, one just double clicks on the epson28087eu.sit package, which will open and run an installer which will install the driver files to their correct locations. You don't have to manually place them anywhere.
So the question is, can Printer Setup Utility see your printer when you click Add? If not you may have to select from there, in one of the dialogue boxes and select 'USB'.
regards roam

Missing driver for usb port

I received an alert to update my ipod software today which i accepted and i now no longer have a driver for my usb port

SAME THING HAPPENED TO ME AND ALL BECUASE I WAS HELPING MY HUSBAND WITH HIS NEWER VERSION OF THE NANO THAT HE GOT FOR CHRISTMAS, NOW I CANT USE MINE!!!

Satellite U840-113: Missing driver for PCI-Communications controller

*Toshiba Satellite U840-113 - PSU4SE:* Win7-Prof-64Bit with original MS-DVD on new SSD completly new installed, RAID disabled, no RAID-Driver oder RAID-Software installed, internal SSD now as normal SSD in use, all drivers successfull installed - except for the following device: in the Device Manager I find under the "Another Devices" the position *"? PCI-Communications controller (single)".*
Who can help me to locate / find the correct driver for this "PCI-Communications controller" ???
What ist this? Do I need this?
The System seems to run perfectly; shall I disable this Device?
Many thanks for helpful answers!!!

Hi
Maybe this Toshiba article could be helpful:
http://www.mytoshiba.com.au/support/items/faq/222
The PCI Simple Communications Controller is part of Intel AMT Management Engine Interface and is related to networking on your computer.
You will need to install the Intel(R) AMT Management Engine Interface driver.

Missing driver for "Base System Device"

Hi,
I have a N200 (0769) with WIN7 (32 bit).
In the Device manager I have two "other devices" with missing drivers named "Base System Device".
I could'n find any of that.
I try looking for the Hardwar IDs:
PCI\VEN_1180&DEV_0592&SUBSYS_382C17AA&REV_0A
PCI\VEN_1180&DEV_0592&SUBSYS_382C17AA
PCI\VEN_1180&DEV_0592&CC_088000
PCI\VEN_1180&DEV_0592&CC_0880
PCI\VEN_1180&DEV_0843&SUBSYS_382B17AA&REV_01
PCI\VEN_1180&DEV_0843&SUBSYS_382B17AA
PCI\VEN_1180&DEV_0843&CC_088000
PCI\VEN_1180&DEV_0843&CC_0880
But with no success.
Any help where can I find that?
Thanks in advance
Solved!
Go to Solution.

hi nadne,
Welcome to Lenovo Community Forums!
Can you try installing this driver
Ricoh Multi Card Reader Driver
7kss73ww.exe
3.25 MB
Hope this helps,
Cheers!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Missing driver for "High Definition Audio Bus" in T61 XP SP3

Dear members, I hope you can help.
My T61 hard disk crashed and I rebuit a new one from scratch. I am missing the above driver. In Device Manager, I have a yellow exclamation mark by the "Audio Device on High definition Audio Bus" under the "Sound, video and game controllers" group.
I have downloaded the following drivers from the Lenovo website and installed them.
7ka114ww.exe; 7fma13ww.exe; 7fmb14ww.exe.
Thank you again for your help. Steve

The modem driver also is needed to be installed as well as Power Management Driver and Hotkey Features.
My home-forum: http://www.thinkpad-forum.de
Wiki: Deutsches ThinkPad-Wiki English ThinkWiki
My ThinkPad-Collection

Missing driver for my HP 15 r-249 TU laptop

hiPlease provide me drivers for my new laptop HP 15 r-249 TU which were missing.I need the following drivers PCI\VEN_8086&DEV_9C22&SUBSYS_2211103C&REV_04 PCI\VEN_10EC&DEV_5229&SUBSYS_2211103C&REV_01 ACPI\VEN_HPQ&DEV_6001 kindly help me.

mk79 wrote:
Dear expert,
thank you for your prompt answer. Please find below details you had mentioned in your reply.
OS - Windows 7 64 bit
Bluetooth controller - PCI\VEN_1814&DEV_3298&CC_0D11 Ralink Bluetooth 4.0
Ethernet controller - PCI\VEN_10EC&DEV_8136&CC_0200 Realtek RTL8102E Family PCI-E Fast Ethernet NIC
Network controller - PCI\VEN_1814&DEV_3290&CC_0280 Ralink Wifi 802.11n
PCI Device - PCI\VEN_10EC&DEV_5229&CC_FF00 Realtek media card reader
PCI Simple Comm Cntroller - PCI\VEN_8086&DEV_9C3A&CC_0780 Intel IMEI driver software
SM Bus Controller - PCI\VEN_8086&DEV_9C22&CC_0C05 Intel chipset driver
USB COntroller - PCI\VEN_8086&DEV_9C31&CC_0C03 Intel USB 3.0 eXtensible host controller
Once again, thanks a lot for responding to my question.
Thanks,
Let me know how these drivers work out.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Missing driver for "Base system device" x2 after Windows 7 install on laptop

Upon upgrading to SSD drive and fresh installation of Windows Professional 64 bit, I have two conflicts in device manager referring to "base system device". Both devices are PCI Slot 2 (PCI bus 67 device 0 function 1)
Both devices report the following code in system information:
PCI/VEN_1180&DEV_E852&SUBSYS_146D103C&REV_01/4&7ECE869&0&02E2
I have read through 16 pages of other people with simlar problems but not the same code. I have installed the Ricoh 5-in-1 reader for 64 bit software with no success. Any help will be greatly appreciated
This question was solved.
View Solution.

Here is the link.
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=4173846&swItemId=ob_79991_1&swEnvOid=4059

Missing driver for co-processor of my hp pavillion dv6000

Hello Mr DavidPK. I saw a similar problem dat i am having with my 3 missing device drivers : 2 base system device and 1 co-processor. but my problem now is with my co-processor driver. Here is my P#: KN050EA#ABU. This problem started when i upgraded from vista to win 7 ultimate

Nvidia Chipset:
http://ftp.hp.com/pub/softpaq/sp37501-38000/sp37730.exe
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

M93p SFF "missing driver" for &DEV_8C24&SUBSYS_309717AA; needed Intel chipset utility 10.0.24

A new M93p SFF machine arrived Thursday, which I'm preparing for shipment to a friend in Virginia whose current 7-year old desktop machine has finally reached its own end-of-life. Win7 Pro x64 pre-installed (via downgrade rights from Win8.1).
I've bought four M93p machines now (one tower and three SFF) and they've all been standard CPU... i5-4570. This time I thought I'd spend the extra $30 and go for one step up, to the i5-4670. Cheap enough. Aside from the Win7 downgrade the rest of the machine is standard.
And then I do my own "after market hardware upgrade", purchasing my own parts: adding another 4GB of memory from Crucial, adding a 256GB Samsung 850 Pro SSD, and adding a low-profile 1GB DDR5 Sapphire R7 250 video card. The existing two pre-installed Win7 boot partitions were easily migrated over to the SSD from the stock 500GB SATA spinner, and the original 500GB spinner was then fully repurposed to be a second "data" drive. All went without a hitch... almost.
In the process of doing Windows Updates, driver updates, Lenovo/Norton bloatware removal, Lenovo software updates, etc., I noticed that there was a device showing a yellow exclamation mark in Device Manager. This was of course totally unexpected, and I was very curious as to its cause. Was it due to the i5-4670 CPU? Was it due to a BIOS update which now made use of a hardware feature that had previously been disabled? Didn't know.
The device was "PCI Data Acquisition and Signal Processing Controller". And its Hardware ID is PCI\VEN_8086&DEV_8C24&SUBSYS_309717AA. The mystery was why this didn't have a suitable Lenovo-provided driver specifically available on the download site for the M93p. And if it was actually an Intel hardware item and should have been supported by the Intel Chipset Utility (latest version for Haswell from Lenovo being 10.0.13), why did it not have the proper driver? And why didn't "update driver automatically" through Windows Update not find the proper driver on the MS Update Catalog site?
All very interesting.
Well, turns out support for this device is related to Intel Dynamic Platform and Thermal Framework Driver. And it turns out that it IS actually supported by the latest Chipset Utility from Intel (v10.0.24), available directly from the Intel download center. Unfortunately it is NOT present in the older 10.0.13 available from Lenovo on their own download site for the M93p drivers and software.
Once that most current 10.0.24 version of the Intel Chipset Utility was run, now sure enough the device is now correctly supported by its driver and no longer appears as "other" with a yellow exclamation mark. Instead, it now appears properly labeled as "Intel(R) 8 Series/C220 Series Thermal - 8C24".
So, problem now resolved. No more "other" unknown device with yellow exclamation mark.
But the question still remains as to what has only newly triggered this in my brand new just manufactured (10A9CT01WW, with its special order i5-4670 CPU instead of standard i5-4570) and delivered Lenovo-provided M93p? How is it that Lenovo didn't observe this? Is it something new from Intel now present in the Q87 chipset used on the motherboard? Why didn't it appear in any of the other three M93p machines I've purchased over the past year?
If it was tied to the i5-4670 CPU, you'd still think Lenovo would have noticed this issue before now.
Anyway, for anybody else who comes along behind me and has this same hardware problem, the solution is easy: just grab at least the latest 10.0.24 Chipset Utility from Intel. Until Lenovo updates things, this appears to be the fix.
Solved!
Go to Solution.

Today's followup...
Lenovo tech showed up as scheduled, although I was baffled because yesterday I was told the replacement board was "back ordered" and still in China (or maybe on a boat in a container, waiting to be unloaded). With the longshoreman's problem on the west coast and specifically affecting the Port of LA, it's not clear when items shipped this way will arrive.
Anyway, today I get a phone call that the tech is 30 minutes out! Great, although I'm baffled as to how he has a motherboard today if yesterday it was supposed "back ordered". Also, he does have the replacement case front fan, in the event it wasn't the original motherboard sensor which that was responsible for the reporting the "system fan" as "not operating" even though it was plugged into the fan header on the motherboard and was spinning properly.
Well, turns out the system board he arrived with was NOT the same 00K277 board delivered from the factory in my M93p as it arrived last Thursday. Instead, it was a presumably acceptable substitute 3T7183 board. And in fact, once installed it DID work.
However... still "not operating" for the front case fan. Disappointing.
Also, the "motherboard temp" of 212F degrees now was no longer even presented at all! It simply was not reported by the sensor to the software. This actually agrees with another M93p, which also fails to report "motherboard temp", while yet another M93p reports it as 72F degrees (instead of the 212F degrees from my original Thursday board). So maybe this particular issue should just be entirely forgotten about, although it certainly doesn't seem at all correct.
Next step, try to replace the case fan. With "not operating" from two boards (and thus two fan headers), it obviously would seem to be the fan itself that's probably responsible.
Well, unfortunately they sent the wrong fan part. It's cable was 4-wire (i.e. PWM?) rather than 3-wire of the original. also the 4-wire cable on the new fan was far too short to be able to reach over to the fan header connector on the motherboard. It's quite simply the wrong fan part.
So, the tech re-ordered the correct replacement fan. Presumably when available I'll get another call and another tech will come out to swap it. Hopefully that will finally resolve the "not operating" system fan issue and I will finally see its RPM.
Bottom line: today's service call accomplished nothing productive. The new board did no harm but it also did no good. And the new fan was unusable, since it was the wrong fan part.
I await the next visit.

Missing driver for TestSTand - Agilent 34401

Hi,
I looked up in your driver library for a Agilent 34401 and I did not find anything for TEstStand. All drivers were either for LabWindows or LabView. Can I use them for teststand as well or it must be explicit that it is designed for TestStand?
thanks
Mathieu Bazinet

That's because TestStand is not a Programming Language. It's a test sequencer. To communicate to instruments you need to use a programming language such as LabVIEW. You can then make use of the different Step Type Adaptor to call your piece of code (code module).
Generally, you have a piece of code between TestStand and the Instrument driver. This piece of code is either or Code Module that you a associate with one of the Built-in Step Types or a Custom Step Type especially design to do a specific role. The IVI Steps Type are Custom Step Types created by NI and supplied as part of the default components of TestStand installation.
In the examples under Steps Types is a Custom Type for the HP34401a written in CVI.
Regards
Ray Farmer

[W510] Missing driver for SCSIADAPTER

Similar Messages

Maybe you are looking for