W510 ram - type and correct placement

I'm planning to add some ram to my w510. Over another forum I've read that 4 dimms can cause trouble, ie kingstons ram didn't work for one user (with ll 4 slots filled). My w510 had 2 Elpida 2GB 8500 dimms installed so I guess I am looking for ddr3 1066 mhz cl7 memory, right?
Another thing is how does actually dual channel work with 4 slots? Do I have to add 2 dimms of the same type so all 4 match? or perhaps is 2+2 and only each to have to match?
It is also strange where to put each dimms. It would seem that two installed dimms should work together (there are in slots under the keyboard) but CPU-Z shows ram in slots #1 and #3 and that they are NOT running dual channel. Is something wrong or it is just software error?
I would be glad if someone could shed some light on this. The new ram will cost around $100 total and I only want to pay once =)
T540 i7 4700MQ, GT 730M, 8GB RAM, Win7

I'm unable to add my 4GB DIMM module.....
I've tried every possible combination to no avail. The 4GB DIMM does not provide 4GB of added memory. I've read the Lenovo's guide and this doesn't give me more, it actually cuts my total memory down to 2GB.
The setup is:
2x Ramaxel 2GB 2Rx8 PC3-10600S
1x Samsung 4GB 2Rx8 PC3-10600S
I'm no DIMM expert, but the 2GB's modules are single channel (or so speccy says). I have no idea what the 4GB module is... The 4GB module is visable when I'm using a management program, but it's not providing the added memory. nor does it show up in my BIOS. The funny thing is that it worked for a short period in this configuration:
2x2GB modules underneath the keyboard and 1x4GB module in the DIMM slot-0 under the W510
The irony here is that the 4GB DIMM module is the only one actually stamped by Lenovo, and it doesn't friggin' work.
I would appreciate some input here please. I'm stomped :/
--- Edit ---
I've tested the 4GB DIMM on another laptop and it worked without any problem whatsoever. I'm contemplating returning my laptop to the support center for service...
--- Edit ---
I've placed the 2GB modules in their respecitve Slot-0 (beneath the keyboard and under the laptop), and this got the DIMM's to work in dual channel as normal. However, placing the 4GB module in any of the vacant slots (Slot-1 or Slot-3) somehow breaks the memory setup and reduces my working amount to 2GB total. I'm using speccy from Piriform (yeah, yeah.. it's a free ad) and it confirms the other slots is being filled with the proper memory module, but the BIOS or the OS does not activate and use them. Am I forced to use memory modules in pairs? Still? I know this was an issue 10+ years ago with the SIMM's...
Cheers
Triple

Similar Messages

Converted PDF file to WORD but have characters in WORD not in original file---can't type in correct places in WORD--what to do?

HELPPPPPPPPPPPPPPPPPPPPPPPP!!!

In Ingknife29,
Are you able to select the text in Word if you triple-click it? If not, is it possible that the original PDF was created from a scanned document? If so, the text could be image text, rather than selectable/editable text. ExportPDF converts image text to selectable text by default, but that option can be disabled if you convert the file via Reader. So, I would make sure that you are allowing ExportPDF to perform OCR, and make sure the the correct language is selected for Text Recognition.
Please let us know if you need additional help.
Best,
Sara

I just bought the revolution after having a blackberry and i'm looking for a notepad type software and a place to store passwords.

i just bought the revolution after having a blackberry and i'm looking for a notepad type software and a place to store passwords.

I use SafeWallet after trying most of the apps in the market place. It's a bit expensive compared to most and you have to pay for the desktop application which sucks but the other apps were some cumbersome I knew I would never use them after the initial setup.
I'll add the normal caution of storing passwords in a non-protected text file but you probably know that
Bob

How to transfer SRM PO Condition Type and Custom fields to ECC?

Hi All,
I have a scenario to transfer SRM Line item condition types and few custom fields to ECC.
I have found the following things but structure 'CI_EKPODB' does not exists in ECC.
I am using 'SRM 5.00' and 'SAP ECC 6.0'.
NOTE: I have to transfer condition records when PO is getting created / modified.
1) Earlier I was planning to use BADI 'BBP_CREATE_BE_PO_NEW' in SRM and this will transfer the data to ECC in case of PO
    Creation.
               It contains the Condition fields to be passed to ECC.
But i am unable to implement the same, whenever i create implementation when i click 'Activate' its getting activate then after few seconds its getting deactivate, i think this is because this BADI is not allowed for multiple use and SAP has already made one implementation on the same.
2) I need to implement BADI 'BBP_ECS_PO_OUT_BADI' in SRM and 'BBP_PO_INBOUND_BADI' in ECC.
SRM BADI will pass verified field details to ECC as a custom fields
       It does not contains the Condition fields to be passed to ECC, so i was planning to pass the same as custom field(s).
ECC BADI 'BBP_PO_INBOUND_BADI' will be used to map the fields to correct place and this should work.
i need to modify the structures and pass all the custom fields (z-fields) - (CI_EKPODB but does not exists kindly suggest) as data.
Other required details:
      Transfer of PO does not supported by SAP for service PO's, any suggestion on the same?
Expecting quick reply from your end.
Thanks in advance.
Regards,
Hemant

Naresh,
Thanks for quick response.
My concern is this BADI 'BBP_CREATE_BE_PO_NEW' will trigger only in case of creation, not when PO is changes.
I have to transfer condition types and custom fields to ECC in both the case (create / change)
If i have to do this only in case of creation then i can pass Condition types / custom fields then i can use parameter 'CS_PO1_DOCUMENT' from method 'FILL_PO_INTERFACE1'.
this parameter contains 'IT_POCOND', 'IT_POCONDX' and 'IT_EXTENSIONIN' as parameter so my problem will be solved.
But i dont think this will trigger in both the cases and 2nd thing i cann't implement the BADI since its not marked for multiple use so i am unable to implement the same.
Kindly correct me if i am wrong.
Once again thanks for your reply.
Please suggest on the same.
Regards,
Hemant

Removing color casts, and correcting colors to match reference materials? any guides/tutorial/videos

I have been looking for tutorials showing how to use SpeedGrade. I am now comfortable with the UI enough to use it after watching these: http://www.youtube.com/user/AdobeTV/videos?query=speedgrade
I am looking for tutorials that show how to do a couple things, first I would like to be able to remove any color casts. In photoshop to do this you can use a curves layer and use the set white point color picker and click somplace that is supposed to be white. and in premier you could do something similar using the Fast Color Corrector. So basically I am looking for a way to target an area in a frame that should be grays, In Anime, the eyes generally will always be shades of gray, so that is what I would target usually when working with anime in photoshop/premiere. If anyone knows of a tutorial that shows how to do this type of color cast removal color correction in SpeedGrade could you please share a link.
Some of the older 80's and 90's anime on film, the film has aged and that is where the color cast came from. There is also a loss of color information across the board. For instance in the below picture. The sky is supposed to be more blue instead of teal/sea green.
Another thing is back in the 80s and 90s a lot of Anime worked from limited color palletes; something like maybe 16 colors total, so a lot of colors are used repeatedly. So even with only a limited amount of reference material I should be able to get the corrections close. (I dont have reference clips for every single episode, only a handful of scenes from a handful of episodes.)
I have some reference material showing approximately what the colors should be. So my next question is if anyone knows of any tutorials/guides/videos showing how to use SpeedGrade to color correct a clip so that the colors match up with the colors used in a reference clip
I was also wondering about auto correction based on a reference clip, although I am guessing this is still not possible.
When I watched the websiminar: http://seminars.adobeconnect.com/_a227210/p738pxm9zs0/ at about 43 minutes into it, a feature is shown that automatically adjust the color using a clip that contains a colorchart.
I was wondering if a tool like that could analyse a clip start to finish, to create a pallete of used colors, and then compare that to the colors used in another clip and correct them. (a feature like this would probably be more useful/accurate in anime than it would liveaction but who knows.)
Another UI related question:
I did have one question, the only place I see to access the colorwheels is in the looks tab, my video I am working on, just manages to fit at 100% in the monitor.
So I would prefer to hide or collapse the different looks(maybe even with a hotkey) so that I can access the color tools that it is covering, I attached a picture of what I am talking about. I know pressing "P" hides everything at the bottom, and figured maybe there is already a way to hide/minimize/collapse the look presets to access the tools behind them without shrinking down the size of the monitor preview.

There is a special grading filter called "Color match" which can assist in cross-referencing the black/white/gray levels from one playhead to another but it's not documented yet. The suggested way to set black/white/gray points in Sg is to adjust it visually, using the waveforms as a guide, but there's no chance of doing that for something as small as a character's eye. There's no "eyedropper" picker on the primary grading panel because Sg isn't a correcting tool, but a cinematic grading tool. 99% of the time the end result of an Sg grading session is a long way from what the camera pixels actually recorded.
If all you are doing is reversing a color cast then Speedgrade isn't the right tool to use - you should be working in Premiere Pro (with the Fast or 3-Way Color Correctors). If you're a Photoshop person the UI is much more recognizable, it'll handle all the native footage you can throw at it, and you get your B-G-W eyedroppers.
In Speedgrade CS6 you cannot hide the Presets panel in the Look or Mask tab. The UI is really designed for use in a two-monitor system (which all professional colorists will have), and/or with a hardware controller (which means you can keep the entire bottom panel hidden).

Order type, Invoice type and Item categories for Nota Fiscal Brazil

Hi eveyone,
we have a company in Brazil implemented in SAP using a different SD Order type, Invoice Type and Item categories
as our mother company in Switzerland. Reason of that is because of the nota fiscal customization for Brazilian legal requirements.
We startet with a Project worldwide to rollout a global template within sales and distribution and are facing now exactly
the problem with those different order type, item categories and Invoice type.
Our local SAP partner in Brazil told as based on best practise we should have different types.
I checked the customization and it seems I can't use e.g.: the same Order type for Brazil and Switzerland because
the activation flag for nota fiscal is linked to the order type and no sales organization can be setted to slplitt the different processes.
Someone knows if there are some possibilities (maybe trough user exits or badi's) to use globally the same dovument types, item categoreis... globally?
Thanks in advance
Gaspare Guttadauro

Hi Gaspare Guttadauro,
I would strongly recommend to use the different document types and item categories as suggested by SAP. Since Brazil do have one of the complex taxation process in place hence to determine correct pricing the different document type will be required. Also functionalities like CFOP determination and nota fiscal relevance can be maintained.
Please feel free to revert the forum in case of any doubts.
Cheers
Atul

Diff b/w reference type and elementary type

hi all
can any one what is the diff b/w reference type and elementary type in data element ....
thanks
lokesh

The data type attributes of a data element can be defined by:
Specifying a domain whose attributes are copied by the data element.
Specifying a build-in type where the data type, number of places, and possibly decimal places can be directly specified.
Specifying a reference type, i.e. reference to a class, an interface, a type defined in the Dictionary, a built-in type, or a generic reference to ANY or DATA.
In the maintenance screen you can set the option you require by setting the appropriate flag (domain, built-in type, reference type) and filling in the corresponding input fields.
A reference type is a reference to another type. There are the following kinds of reference types:
Reference to a class or an interface
Reference to a type defined in the Dictionary
Generic reference to ANY, OBJECT, or DATA
Reference to a built-in Dictionary type with specification of the length and possibly also the decimal places
You can use a reference type to define the data type properties for a data element, or for typing the component of a structure or the line type of a table type.
In the field Referenced type, enter the name of a class, an interface, the generic references DATA, OBJECT, ANY, or the name of a type defined in the Dictionary. If the reference type is to be a predefined Dictionary type, choose the reference to the predefined type. Enter the number of characters and, if required, the number of decimal places.
where as
The data class describes the data format at the user interface.
If a table field or structure field or a data element is used in an ABAP program, the data class is converted to a format used by the ABAP processor. When a table is created in the database, the data class of a table field is converted to a corresponding data format of the database system used.
You can find a detailed description of the data classes allowed in the ABAP Dictionary in Overview of the Data Classes.

Difference b/w DATA TYPE and DATA OBJECT & differences b/w TYPE and LIKE

hai
can any one say the differences between Data type and Data Object.
And also differences between TYPE and LIKE
thanks
Gani

hi,
_Data Types and Data Objects_
      Programs work with local program data that is, with byte sequences in the working memory. Byte sequences that belong together are called fields and are characterized by a length, an identity (name), and as a further attribute by a data type. All programming languages have a concept that describes how the contents of a field are interpreted according to the data type.
      In the ABAP type concept, fields are called data objects. Each data object is thus an instance of an abstract data type. There are separate name spaces for data objects and data types. This means that a name can be the name of a data object as well as the name of a data type simultaneously.
Data Types
   As well as occurring as attributes of a data object, data types can also be defined independently. You can then use them later on in conjunction with a data object. The definition of a user-defined data type is based on a set of predefined elementary data types. You can define data types either locally in the declaration part of a program using the TYPESstatement) or globally in the ABAP Dictionary. You can use your own data types to declare data objects or to check the types of parameters in generic operations.
     All programming languages distinguish between various types of data with various uses, such as .. type data for storing or displaying values and numerical data for calculations. The attributes in question are described using data types. You can define, for example, how data is stored in the repository, and how the ABAP statements work with the data.
Data types can be divided into elementary, reference, and complex types.
a. Elementary Types
These are data types of fixed or variable length that are not made up of other types.
The difference between variable length data types and fixed length data types is that the length and the memory space required by data objects of variable length data types can change dynamically during runtime, and that these data types cannot be defined irreversibly while the data object is being declared.
Predefined and User-Defined Elementary Data Types
You can also define your own elementary data types in ABAP using the TYPES statement. You base these on the predefined data types. This determines all of the technical attributes of the new data type. For example, you could define a data type P_2 with two decimal places, based on the predefined data type P. You could then use this new type in your data declarations.
b. Reference Types
Reference types are deep data types that describe reference variables, that is, data objects that contain references. A reference variable can be defined as a component of a complex data object such as a structure or internal table as well as a single field.
c. Complex Data Types
Complex data types are made up of other data types. A distinction is made here between structured types and table types.
Data Objects
      Data objects are the physical units with which ABAP statements work at runtime. The contents of a data object occupy memory space in the program. ABAP statements access these contents by addressing the name of the data object and interpret them according to the data type.. For example, statements can write the contents of data objects in lists or in the database, they can pass them to and receive them from routines, they can change them by assigning new values, and they can compare them in logical expressions.
       Each ABAP data object has a set of technical attributes, which are fully defined at all times when an ABAP program is running (field length, number of decimal places, and data type). You declare data objects either statically in the declaration part of an ABAP program (the most important statement for this is DATA), or dynamically at runtime (for example, when you call procedures). As well as fields in the memory area of the program, the program also treats literals like data objects.
        A data object is a part of the repository whose content can be addressed and interpreted by the program. All data objects must be declared in the ABAP program and are not persistent, meaning that they only exist while the program is being executed. Before you can process persistent data (such as data from a database table or from a sequential file), you must read it into data objects first. Conversely, if you want to retain the contents of a data object beyond the end of the program, you must save it in a persistent form.
Declaring Data Objects
      Apart from the interface parameters of procedures, you declare all of the data objects in an ABAP program or procedure in its declaration part. These declarative statements establish the data type of the object, along with any missing technical attributes. This takes place before the program is actually executed. The technical attributes can then be queried while the program is running.
     The interface parameters of procedures are generated as local data objects, but only when the procedure is actually called. You can define the technical attributes of the interface parameters in the procedure itself. If you do not, they adopt the attributes of the parameters from which they receive their values.
ABAP contains the following kinds of data objects:
a. Literals
Literals are not created by declarative statements. Instead, they exist in the program source code. Like all data objects, they have fixed technical attributes (field length, number of decimal places, data type), but no name. They are therefore referred to as unnamed data objects.
b. Named Data Objects
Data objects that have a name that you can use to address the ABAP program are known as named objects. These can be objects of various types, including text symbols, variables and constants.
Text symbols are pointers to texts in the text pool of the ABAP program. When the program starts, the corresponding data objects are generated from the texts stored in the text pool. They can be addressed using the name of the text symbol.
Variables are data objects whose contents can be changed using ABAP statements. You declare variables using the DATA, CLASS-DATA, STATICS, PARAMETERS, SELECT-OPTIONS, and RANGESstatements.
Constants are data objects whose contents cannot be changed. You declare constants using the CONSTANTSstatement.
c. Anonymous Data Objects
Data objects that cannot be addressed using a name are known as anonymous data objects. They are created using the CREATE DATAstatement and can be addressed using reference variables.
d. System-Defined Data Objects
System-defined data objects do not have to be declared explicitly - they are always available at runtime.
e. Interface Work Areas
Interface work areas are special variables that serve as interfaces between programs, screens, and logical databases. You declare interface work areas using the TABLES and NODESstatements.
What is the difference between Type and Like?
Answer1:
TYPE, you assign datatype directly to the data object while declaring.
LIKE,you assign the datatype of another object to the declaring data object. The datatype is referenced indirectly.
Answer2:
Type is a keyword used to refer to a data type whereas Like is a keyword used to copy the existing properties of already existing data object.
Answer3:
type refers the existing data type
like refers the existing data object
reward if useful
thanks and regards
suma sailaja pvn

Imac won't let me install Final cut studio 2..it will let me install the upgrade, but it has no live type and i need it to work on my current projects. How do I get Live type back installed in iMac

I just purchased an iMac for home and went to install final cut studio 2 and it gave me an error saying something about "PowerPC" not used or something like that. Installed the studio upgrade just fine...but it has no "Live Type" which I need to work on projects I have been using in my Mac Pro at my work place. How do I get "Live Type" to install in this iMac? Downloaded Live Type upgrade but that won't update cause there's no "Live Type" in the applications.

It sounds like you have Lion installed on your new imac, although your profile says SL 10.6.8 (you may want to change this.)
If you have the Snow Leopard install disc I believe you can install "Rosetta" from the extras folder which will then, if you have the original FCS2 discs , allow you to select and install Live Type and LIve Type content only from the custom install options.
I hope this will work for you.
DM

I need to set up an expense form so that our consultant can "filter" by customer type, program type, and finally the purpose of the trip. For instance: the customer types are churches, schools, organizations. The program type would be fund raising, gift p

I need to set up an expense form so that our consultant can "filter" by customer type, program type, and finally the purpose of the trip. For instance: the customer types are churches, schools, organizations. The program type would be dependent on the customer type selection from the first list. Some examples would be: fund raising, gift planning, surveys, and others. The purpose of the trip would be dependent on the program type selected from the second list. Some examples of trip purposes would be: presentation, design, prospecting. Further, the purpose of trip selection from the third drop-down box would then have to determine the values of other fields by expense type: such as commission, airfare, hotel. etc. I've tried pop-up menu but can't figure out how to "select" from the final popup list and have it populate a field for the purpose of the trip. I've tried to look at the JavaScript examples for dependent drop-down boxes, but can't find any that quite fit what I'm trying to accomplish. I am very new to all of this. No training in writing Javascripts - just trying to wing it. The form has to be very simple for our consultants to use, but also give our office the detail we need to process through the correct account numbers. I would appreciate any detailed step-by-step instructions - kind of a javascript for dummies type of info. HELP!

An AcroForm is the name given to the type of PDF form that you create in Acrobat. An XFA form is the type of form that you create in LiveCycle Designer. Although they are both PDF files, they are very different structurally and have significant;y different scripting models. So pay attention to the information on AcroForms and ignore anything about XFA. Be sure to get the sample PDF forms so you can look at how it works and where the scripts are placed.
What you want to do will require scripting, and if you don't have the experience and are unable to use the information in the tutorials to create what you want, you might consider getting someone who has experience do this for you. I'll often suggest code if I can do so quickly, but what you want requires more than a few minutes.

Automatic determination of Delivery type and Billing type in a sales order

Hi,
I want to know that in a sales order cycle, how does automatic assignment of delivery type and billing type takes place after we create a sales order?
For example,when I create an outbound delivery for a sales order of type normal (OR) then in that case how does the system knows that it has to create an outbound delivery of type LF.How does the system propses it automatically and same is the case of billing document.

Hi
In customising the sales document type (Tcode VOV8) -
specify the default Delivery type in the field DELIVERY TYPE in the 'Shipping' area of the sales document type customisation.
Similarly you can specify the billing type in the BILLING area for both Delivery related billing and Order related billing.
Thanks,
Ravi

Data Type, Message Type and Mapping for FTP

Thanks in advance for your replies.
As our first production XI scenario, we need to move several (at least 46) files from our SAP instance to a couple of different servers to support our legacy systems. Once all locations are on SAP this requirement should go away.
I only want to pick up the file from the one server and place it on the other and this leads me to some questions.
How do I define the Data Type and Message Type for each of the files? Do I need to consider the size of the record in each interface and create DT/MT with different sizes.
Do I need a mapping program that simply maps one structure to the other?

I recently completed a similar exercise.
It looks like this...
server1 ftp (Sender - delete file) - XI - Server2 ftp (receiver - create file). This will move the file from one server to another.
I used the same schema and mapped fields on a one to one basis.
The Size of the files I process are between 6kb and 500kb each, but the mapping/fields remain constant, just the numebr of items change.
Worked seemelessly for the last three weeks (since go-live)

Is it possible to make a partition in Windows 7 and then place OS X on that partition?

My employer just gave me a new MBP 13" with Windows 7 on it. It has bootcamp running, but no option to boot in Mac OS. IT dept. said they deleted Mac OSX Lion due to security concerns (?). In any case, as I travel quite a bit and have and ipad and iphone, I would like to use Mac OSX for personal use and Windows 7 for work.
Is it possible to make a partition in Windows 7 and then place Mac OSX Lion on the partition so that I do not need to reinstall Windows? I know it would be possible to wipe the HDD and then add Mac OS, then bootcamp, then Windows 7, but adding again would get my IT dept involved which would put me back to square one.
Any help would be appreciated!!
JF

Ok let me ask you IF the IT department of your workplace does NOT want OS X installed on "THEIR" (The Companies) computers because of what they think is some type of security issue why are you trying to go against their wishes and install OS X on a computer that is NOT owned by you.
That could cost you your job.
If you continue down this path you will screw up the Windows install and have to take the system back to the IT department to get it fixed. What do you think they will say at that point?
Do as you like but you would be better off just buying your own Mac computer if you are set on using OS X as your personal operating system.

There is a mismatch between order type and GL accountu201D.

Hello
Can any one help me to know why I am getting this error message.
Here I am giving the steps carried out.
Step1. Using transaction code: FB60 I have posted a vendor invoice to a Machinery account GL account against a internal order.
Step2. A down payment using transaction code FBA7. using a special indicator M to a bank account.
Step3. When I am trying to clear the open item (by selecting above both documents) for the vendor using transaction F-44 system is giving an error message u201CThere is a mismatch between order type and GL accountu201D. System is prompting to correct the down payment entry, where I dint use any Cost centre, internal order.
Checked the Internal order profile, AUC settlement profile etc and no able to find an error message.
Can any one explain me why this error is coming and what need to be check in order to rectify it.
Regards
RS.

Hi It looks that the field status of the Order Type and GL Account field status is being mistmatching with each other. You can check the field status group given on GL Account and the fields status in Order Type.

Lines around type and other type/text problems in Dreamweaver CS3

Dear Dreamweaver forum:
Good news/bad news,
First the good news…
My thanks to a forum member by the name of Mylenium. With Mylenium's advice I have improved my halo problem by including a black background when I save type in Illustrator CS3 as part of importing it into Dreamweaver CS3.
However, the bad news, is that I’m still having type and text problems.
Problem area 1
Now, in Dreamweaver, I’m getting lines appearing around the type.
I am dragging and dropping the .gif type file into a Dreamweaver Div Tag.
How do I get rid of the lines around the type so that they do not show up in the Safari browser?
(Please see below)
Problem area 2
I cannot drag and drop text from a Word .doc file into a Dreamweaver div tag.
I also cannot copy and paste Word .doc text into a div tag.
How do I include text on my webpage without having to manually type it in?
(Please see below)
Any help would be appreciated. Thanks!
From within Dreamweaver CS3, how do I place text? Dragging and droppign the file does not work.
This is screenshot of what I see so far when I use Safari to test what I have made so far in Dreamweaver CS3.
I get lines around type.........not usually a good thing.........How do I fix it?
The way I created the portfolio type in IllustratorCS3 using the File > Save for Web and Devices. I then imported the resulting .gif file so that it was within my root folder within the Files panel within Dreamweaver CS3.
Am I doing this right?

Hi
The problems you are experiencing with the image text, (why are you using image text, these days?) is probably cause by the image having a border when created in illustrator, or the image size being set incorrectly.
As for the word text if you are using windows, see http://livedocs.adobe.com/en_US/Dreamweaver/9.0/help.html?content=WSc78c5058ca073340dcda91 10b1f693f21-7ce6.html.
On the mac it is a little more complex, save your word doc as html, then apply the 'clean up word html files', (see - http://livedocs.adobe.com/en_US/Dreamweaver/9.0/help.html?content=WSc78c5058ca073340dcda91 10b1f693f21-7ef5.html) copy the relevant text and mark-up from the word html file, and paste into your html document in the required position.
PZ
www.pziecina.com

W510 ram - type and correct placement

Similar Messages

Maybe you are looking for