W520 Error while undocking after BIOS Update

Hello,
I already asked this in the german community but didnt get any answer. So let me try it here:
On my W520 (bought April 2012) I did a BIOS update. After this update the notebook is running with
LENOVO 8BET58WW (1.38 ), 06.07.2012.
Since this update I have a problem when my notebook is returning from hibernate and snooze mode. Please see the picture below.
It means: “Error while undocking…” . Means: It tells me that it is not able to undock the Utraby Harddisk.
Funny thing: I didn’t try to undock it. The notebook starts from hibernate and the first thing it does is throwing this error. Constantly. No software is running or accessing the drive.
It is a Ultrabay III adapter including a harddisk as a D drive. Before this BIOS update I never had this error. I already rebooted the notebook and undocked the harddrive to test if this error would disappear. But no chance.
After pressing the ok button everything works. But this error pops up every time and is annoying,
How can we get rid of it?.
Merci.

@Al - yes, you can back up to 1.36. In fact, I recommend it. It is posted under "Support" on Lenovo.com. I would give you the exact link, but the site is so slow I can't get anywhere right now.
The ISO version is still there. You will have to burn a bootable CD to revert.
If you are a glutton for punishment you could try going to 1.39, but I would stick with what has worked before.

Similar Messages

HP p6230a runs slow after bios update - Getting error BIODHD-8 on Diagnostic Tools

After bios update my desktop runs so painfully slow it is unworkable. Disk drive seems to be constantly hammered by processes that don't appear on task manager. Running 64 bit windows 7 (sp1). Running the diagnostic tools prior to boot up comes up with error code BIOHD-8 - A SMART test failed on the drive - please contact HP Support. Ideally would like to get previous version of bios as machine was running well before update.

I will ask my HP Employee Expert colleagues about this internally. It will take a while for them to respond.
the BIODHD-8 error code means your harddrive is failing and must be replaced.
Back up everything that you possibly can before it fails and no longer boots up into Windows .
is your notebook still within the standard warranty period of one year? A notebook hard disk is a warranty replaceable item.(no cost to you while within warranty)
HP notebook warranty status check website
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

I can't activate windows 8.1 pre-installed on my Toshiba E45-B4200 after BIOS Update

I bought Toshiba laptop Model E45-B4200, at first time I could activate windows 8.1 like a charm.
Few months later Windows 8.1 has crashed, so I did clean install of pre-installed windows, no problem so far. Toshiba Application installer app has downloaded BIOS update, so I ran it.
I tried to activate windows after BIOS update, but it didn`t work. No error message, but Change PC settings window just got minimized every time that I tried to click on Activate Windows option. I thought that I did some mistake, so I repeated windows reinstallation, and same problem occurred again.
Now I can`t update Windows, Office 2013, and so on.
I`ve tried SLUI 4 command to force activation by phone, but it didn`t work as well.
I read on MS blogs that windows 8.1 stores product key on MSDM table, windows should be activated normally. Now I got no options now, can you help me?

It shouldn't need to be activated it. Everything should be automatic. Because it's asking you, that's already indicative of a problem. You might want to call customer support.
- Peter

Error while installing the BAM Updater Service in Windows

Hi all,
I am getting an error while installing the BAM updater service in Windows. When i type the "oraclebpmdatawarehouse install " command in the command prompt it gives error as follows:
d:\OraBPMEnterpriseHome\bin>oraclebpmwarehouse install
Installing...
wrapper | OpenSCManager failed - Access is denied. (0x5)
Please can anyone tell me how to get rid of this error.
I have already done everything else like setting the database and other things.
Thanks.

From the error message you specified, I guess you are trying to install MS Office SP2 package. If you are then its not MS Office package its just a Service Pack; something like a patch. You need to install a Full Base package first. Again, as mentioned by Rajiv - refer to MS Support

Error while running base line update

I am getting below error while running baseline update in endeca environment. please help me out to resolve this issue.
./baseline_update.sh
WARNING: /opt/endeca/PlatformServices/6.1.0/j2sdk/bin/java does not exist
WARNING: Using java in /usr/java/jdk1.6.0_25/bin/java
[11.29.12 13:15:00] INFO: Checking definition from AppConfig.xml against existing EAC provisioning.
[11.29.12 13:15:02] INFO: Definition has not changed.
[11.29.12 13:15:02] INFO: Starting baseline update script.
[11.29.12 13:15:02] INFO: Acquired lock 'update_lock'.
[11.29.12 13:15:02] INFO: Downloading config files from Web Studio.
[11.29.12 13:15:02] INFO: [ITLHost] Starting shell utility 'emgr_update_get_ws_settings'.
[11.29.12 13:15:03] SEVERE: Utility 'emgr_update_get_ws_settings' failed. Refer to utility logs in [ENDECA_CONF]/logs/shell on host ITLHost.
Occurred while executing line 13 of valid BeanShell script:
10| if (Forge.isDataReady()) {
11| if (ConfigManager.isWebStudioEnabled()) {
12| // get Web Studio config, merge with Dev Studio config
13| ConfigManager.downloadWsConfig();
14| ConfigManager.fetchMergedConfig();
15| } else {
16| ConfigManager.fetchDsConfig();
[11.29.12 13:15:03] SEVERE: Caught an exception while invoking method 'run' on object 'BaselineUpdate'. Releasing locks.
Caused by java.lang.reflect.InvocationTargetException
sun.reflect.NativeMethodAccessorImpl invoke0 - null
Caused by com.endeca.soleng.eac.toolkit.exception.AppControlException
com.endeca.soleng.eac.toolkit.script.Script runBeanShellScript - Error executing valid BeanShell script.
Caused by com.endeca.soleng.eac.toolkit.exception.EacComponentControlException
com.endeca.soleng.eac.toolkit.utility.Utility run - Utility 'emgr_update_get_ws_settings' failed. Refer to utility logs in [ENDECA_CONF]/logs/shell on host ITLHost.

Welcome to forum, Please raise only one thread for same problem..
error while running base line update
-RMishra

Error code msvcr80 after last update now itunes will not open

Error code msvcr80 after last update now itunes will not open. Reinstalled and still does not work

Click here and follow the instructions. If they don't work, perform a complete reinstallation (Windows XP, Windows Vista and newer).
(98968)

Problem in booting after bios update

Originally, it was windows home basic was installed in my laptop. But recently I had installed Windows professional. After installation I have downloaded all drivers which are compatible for my laptop model. After BIOS update installation my pc is not booting up at all. Only power button, WiFi and capslock is lighting. Capslock is continuosly blicking. Even FAN speed gets lowered. I have tried hard reset as well as windows+B comand during startup still condition is same. Please reply me....

see help 8....
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

After BIOS update Satellite L350-172 doesn't start anymore

Satellite L350-172 Bios-Update from bios-20090203164614 to bios-201002250
I just updatet the BIOS of my notebook from 1.60 to 2,20. Now the Notebook doesn't start any longer.
"It was stopped for reason not to damage the Computer" - blue schreen.
How can I downgrade the bios again? Or - what have I to change in the bios-settings?

Hi schuwe,
Im a little bit confused about your posting. How do you tell your BIOS not to restart?
Anyway, after BIOS update you should load the default settings in BIOS.
Did you choose the right BIOS especially for your model?

HT4009 Hi, Getting an error while trying to download updates. Err Msg "Account Not in this store' Your account is not valis for use in the US store. You must switch store before purchasing' Have tried to change the store bu not successful. kindly advice

Hi, Getting an error while trying to download updates. Err Msg "Account Not in this store' Your account is not valis for use in the US store. You must switch store before purchasing' Have tried to change the store bu not successful. kindly advice

http://support.apple.com/kb/HT1311

Hi . plz help me. after bios update. i could work till I shutdown

After bios update I could work till I shutdown my laptop g510 . Now when I press power button. White light near camera shows but again it goes off. Plzzzzz help me
I also pressed one recovery. Then pressed f2 and f9 f12 nothing working.

take it to point of purchase with proof of purchase if you can't find a Nokia care point near you
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

After BIOS update DVD driver do not read DVDs anymore - Sat A80

Hi,
I have a Satellite A80-131 and after bios update (last version 2.5) by windows procedure update, my DVD drive do not read DVD medias anymore. It is possible to read CD medias, but not DVD one.
Can I reinstall the old bios? Can I reinstall the firmware?
Thanks
Ronai Lisboa

Hi Ronai
Like Jimi has said in the posting above. It's very unusual that after BIOS updating the DVD drive hasn't read the DVDs.
Furthermore it's not advisable to use any 3rd party applications to DOWNGRADE the BIOS. Usually only the ASP can downgrade the BIOS. Such procedures are very serious and the wrong procedure can damage the motherboard.
However, it's nice that you have solved the problem and that the drive works properly.
Thanks for the feedback.

Satellite Pro L300: BSOD after BIOS update

Hi
after update the Bios of Satellite Pro L300, the windows not start!
Its show the blue dead screen!
What can i do?

Hi
Are you able to access the BIOS settings?
Im not quite sure why this BSOD appears but possibly the SATA mode settings have been changed after BIOS update
Usually the SATA mode should be set to AHCI if the SATA drivers are installed.
But if the SATA drivers are not included the SATA mode should be set to compatible.
Please check this!
Furthermore you could set the BIOS to the default settings and could try to boot the machine again.

Satellite A100-590 PSAA9E freezes on Toshiba welcome screen after BIOS update

Hi.
Yesterday I did a BIOS update on my Satellite A100-590 PSAA9E-03Z00QGR with the appropriate flash:
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_driver_details.jsp?service=EU&selCategory =2&selFamily=2&selSeries=153&selProduct=624&langua ge=17&selOS=10&selType=all&yearupload=&monthupload =&dayupload=&useDate=null&mode=userMachines&search =&action=search&macId=&country=all&selectedLanguag e=17&type=all&page=1&ID=58477&OSID=-1&driverLanguage=42
bios-20070709111839.zip
After the flashing procedure the machine rebooted automatically, but unfortunately it now keeps hanging at the Thoshiba welcome screen. Also pressing F2 or F12 won't change anything. It seems like the BIOS is corrupt.
I saw, that in the BIOS package are delivered two flash files (s10gm590.rom and s10pm590.rom). But just executing the SanAntonion10 BIOS590MP.exe a .vbs script is started that decides automatically chooses and loads a flash file. Maybe it chose the wrong one?
What shall I do now? Is there a way to restore the BIOS, or do I have to send my notebook in?
Thanks in advance
MAT

> Satellite A100-590 PSAA9E freezes on Toshiba welcome screen after BIOS update
What to say Marc. It looks like you have used a wrong BIOS version or you have updated the BIOS in wrong way.
You could try to access the BIOS and try to set the settings to default.
Dont forget to save the settings if you will exit the BIOS.
But if this procedure does not help, you will have to contact the ASP in your country.
Possibly the guys will try to flash the BIOS again with other special version.
Good luck
Greetings

After bios update, my window media player got hang and headphone clarity is not proper

HP Pavilion g6 after bios update, my window media player got hang and headphone clarity is not proper

Hello mathewstays,
Which model of g6 do you have? Which operating system? I'll be able to better assist when I know this information.
Thanks,
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

After bios update side nomberpad is not workinh keys from 0-9

after bios update side nomberpad is not workinh keys from 0-9

Hello jay04,
Welcome to the HP Forums!
I understand the number keys do not work on your keyboard. I will do my best to assist you. First, I require the following information:
1. The computer's model number. If you require assistance locating this information, please reference this website: Guide to finding your product number
2. The computer's operating system. If you require assistance locating this information, please reference this website to determine your Windows operating system.
3. Does this occur on certain programs, or all programs?
4. Have you installed any new software or drivers on this computer, before the issue appeared?
Additionally, if the issue just began occurring, I would perform a system restore. I want you to bring the computer back to the earliest restore point possible, in an attempt to dodge whatever caused the issue. Here is a document on how to perform a System Restore: System Restore
Thanks!
Mario
I worked on behalf of HP.

W520 Error while undocking after BIOS Update

Similar Messages

Maybe you are looking for