W520 lock-ups with 100% disk access

Seemingly at random, my W520 will lock-up and the HDD access light is solid. I can move the mouse, but the computer won't respond to mouse clicks or keyboard presses. My only way out is a hard power-down (hold in the power button) and restart. This has happened twice in the past week or so. I'm not doing anything particularly disk-intensive when this happens. I'm using the included 500GB Hitachi drive.

ColonelONeill wrote:
>Reallocated Sectors Count: 5
There's your problem. CHKDSK /F /R /B might be able to do something. Alternatively, something like SpinRite or HDD Regenerator might fix it. (All three of these methods take a LONG time, so do it overnight.)
If none of those fix it, then you're probably going to have to replace te drive.
I don't believe that is the problem unless the reallocated sector count keeps growing. The worst that will happen is a bit of slowness accessing the relocated sector. There's something else amiss here.
W520, i7-2820QM, BIOS 1.42, 1920x1080 FHD, 32 GB RAM, 2000M NVIDIA GPU, Samsung 850 Pro 1TB SSD, Crucial M550 mSata 512GB, WD 2TB USB 3.0, eSata Plextor PX-LB950UE BluRay
W520, i7-2760QM, BIOS 1.42 1920x1080 FHD, 32 GB RAM, 1000M NVIDIA GPU, Crucial M500 480GB mSata SSD, Hitachi 500GB HDD, WD 2TB USB 3.0

Similar Messages

Please help! Major problems (performance and lock-ups) with brand new W520 with Intel 520 SSD

My company primarily uses HP machines but I've been a long time IBM (now Lenovo) fan so I recently had IT purchase me a new Lenovo W520 (product ID 42763LU).
Once the machine arrived I had them do the following:
Remove the 500GB HDD and replace it with an Intel 520 series 240GB SSD
Remove the optical drive and install the 500GB hard drive that came with the machine in the optical bay (with the bay adapter of course)
Format both drives and put a preconfigured windows 7 64-bit image on the SSD
A general summary of the system is the following:
Intel i7-2860QM CPU
8GB RAM
NVIDIA Quadro 1000M
Intel 520 240GB SSD (primary HDD) [SSDSC2CW240A3]
Hitachi 500GB HDD (optical bay) [HTS727550A9E365]
Intel Advanced-N 6205 network adapter
TouchChip Fingerprint Scanner
The machine was a few days delayed getting to me due to "hard drive driver issues" (that's what I was told). When I received the machine I immediately noticed that it was much slower than I expected (I have a custom built i5 HTPC at home running windows 7 on a Crucial SATA III SSD that I was comparing it to) and I was experiencing frequent hangs (ranging from 30 seconds to multiple minutes), super long boot times, general “slowness” at times, and occasional lock-ups. Since our "baseline" laptop here at work is the "equivalent" HP workstation my IT guys have been less than helpful in helping me to solve this issue. Being reasonably computer savvy I decided to try to try to fix the issue myself. I performed the following “troubleshooting” steps:
1. One of the first issues (errors) I noticed in the event viewer was errors related to the optical drive. Clearly the image they installed on the machine was not from a machine with the same hardware configuration. So, I decided to just wipe the machine and perform a fresh install of windows 7 from the disks (well, USB). After spending multiple days installing windows, performing updates, making sure all the drivers were current, and installing only the critical software I need, I was disappointed to realize that although I fixed the optical drive errors the machine was still slow, was hanging, and locking up regularly.
2. Removed the cover on the machine and removed/reinstalled the drive to verify it was secure.Everything looked good.
3. Verified the latest firmware is installed on all my Intel hardware. Everything seemed up to date.
4. I performed a number of troubleshooting steps like booting the machine with/without the battery, with/without the HDD in the optical bay, installed/removed from the docking station, etc. and none of these things helped (also a note – occasionally when running on the battery I was hearing a strange “buzz” or “static” sound coming from the area around the SSD).
5. Next I did some internet research and learned quite a few things. First, it sounds like others have had similar problems with this machine and/or SSD combo and there were quite a few options suggested to “fix” these issues. The general consensus for troubleshooting steps were:
5.1. Download and install the latest Intel chipset drivers and AHCI controller drivers (overwriting whatever windows installs during updates).This didn’t fix anything.
5.2. Turn off PCI express link state power management in the power manager. This didn’t fix anything.
5.3. Disable superfetch, prefetch, indexing, defragmentation, page file, system restore, and hibernate. A few of these were already disabled by windows so in those cases I just verified they were disabled in the services and application editor. These things may have slightly increased performance but did not fix the major hang/lockup issues I was having.
5.4. I followed online steps to edit the registry to disable the PCI link power management by adding ports, adding the required variables, and setting them all to 0. This did seem to have fixed the hangs and/or lock-ups but the machine is still much slower than I would expect (boot times are still pretty slow and it does “stutter” when I’m doing more than one thing at a time. Also a note here – I have the Intel SSD toolbox installed and I noticed that it was giving me a warning for DIPM not being optimized. I made the mistake of clicking “Tune!” and then started having the hang/lock-up issues again. I went back into the registry and sure enough the PCI link power management variables for ports 0 and 1 were set back to 1. I set them back to 0 and the hangs have gone away. I will not be “tuning” the DIPM through the Intel SSD toolbox again…
6. I also fixed a couple of other minor errors I was seeing in the event viewer by disabling benign services and/or making slight timeout modifications (I researched each issue on the internet to verify they were benign before I implemented any changes). These fixes didn't seem to do anything other than make some of the errors/warnings go away. So, the list of errors/warnings has become much smaller but I’m still getting the following (maybe an issue, maybe not?):
Event ID 37 for every processor saying that they are in a reduced performance state for xx seconds since the last report
Event ID 10002 - WLAN Extensibility Module has stopped
Event ID 4001 - WLAN AutoConfig service has successfully stopped
Event ID 27 – Intel® 82579LM Gigabit Network Connection link is disconnected
I suspect the WLAN errors have something to do with windows fighting with the Lenovo access connection tools?
7. Since the machine still seemed slow I downloaded the program AS SSD and checked the performance of the SSD. When I compared my performance numbers to the benchmark numbers I found onlineI was very surprised to discover that I’m getting about 50% of the performance that I should (values below are read/write).
Seq: 262.11 / 188.32 (s/b 504.58 / 298.28) [MB/s]
4K: 15.83 / 44.92 (s/b 21.70 / 62.60) [MB/s]
4K-64Thrd: 165.23 / 154.46 (s/b 241.38 / 234.08) [MB/s]
Acc.time: 0.218 / 0.294 (s/b .0186 / 0.208) [ms]
Score: 207 / 208 (s/b 314 / 327)
Overall Score: 533 (s/b 797)
One more note - it seems like my cooling fan is running at a high speed almost all of the time. This is probably one of my power settings (I think I have it set for max performance) but it's even doing this when there is no load (i.e. I'm using IE and just vieweing webpages - like right now).
So, I apologize for such a long post but I’ve spent countless hours researching and troubleshooting this problem and haven’t been able to figure out what the heck is wrong here. Am I missing something simple or do you guys think I have a SSD and/or problem with the machine itself? To say that any and all help would be greatly appreciated would be a massive understatement – I’m on the verge of pulling my hair out and I really need this machine working as quickly as possible!
Please let me know if you have any suggestions and/or need additional information. Thanks in advance for your help!
-Erik

Lol gotcha about the drive as an option. I didn't go SSD with mine. Do you have the latest firmware on your drive? It is supposed to be v1.97. Just checking (ah and I see item 3 so guess so). Do you have the SSD drive toolbox software installed?
http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Solid+State+Drives+and+Cach...)
Seems some useful tools are in there. I can't say much beyond that with the drive. Oh. Why does your fan always run at high speed? Can you describe that? I mean, are we troubleshooting the right kind of issue? Is there anything else going on with your system? I saw about the reduced core speeds message. what are your system loads like? Anything causing high cpu utilization? Could be something other than the drive causing your low numbers and lockups.

Total lock-ups with fan running - translate system.log file please!?

Hi, all. My late 2005 2.3 gig dual G5 has been experiencing random lock ups for as long as I can remember. My system is up to date and I have tested each pair of the 5 gigs of ram that I have and the system freezes with each pair. It can happen at any time, when I am doing absolutely nothing, for example, overnight. I am at my wits end!
Here's the system log file for the latest freezes. Can anyone tell me what's going on here??? I really need to get to the root of this problem. Thanks so so much in advance.
Apr 12 17:32:52 Marc-Weinbergs-Computer kernel[0]: AFP_VFS afpfs_Reconnect: connect on /Volumes/Macintosh HD failed 89.
Apr 12 17:32:52 Marc-Weinbergs-Computer kernel[0]: AFP_VFS afpfs_unmount: /Volumes/Macintosh HD, flags 524288, pid 62
Apr 12 17:44:46 Marc-Weinbergs-Computer /Library/Application Support/FLEXnet Publisher/Service/11.03.005/FNPLicensingService: Started\n
Apr 12 17:44:46 Marc-Weinbergs-Computer /Library/Application Support/FLEXnet Publisher/Service/11.03.005/FNPLicensingService: This service performs licensing functions on behalf of FLEXnet enabled products.\n
Apr 12 18:01:06 Marc-Weinbergs-Computer KernelEventAgent[62]: tid 00000000 received unknown event (256)
Apr 12 18:01:49 Marc-Weinbergs-Computer KernelEventAgent[62]: tid 00000000 received unknown event (256)
Apr 12 18:08:29 Marc-Weinbergs-Computer diskarbitrationd[69]: SDCopy [1056]:36091 not responding.
Apr 12 18:16:18 Marc-Weinbergs-Computer KernelEventAgent[62]: tid 00000000 received unknown event (256)
Apr 12 18:16:53 Marc-Weinbergs-Computer KernelEventAgent[62]: tid 00000000 received unknown event (256)
Apr 12 19:24:12 Marc-Weinbergs-Computer ntpd[191]: time reset -0.650307 s
Apr 13 01:05:45 Marc-Weinbergs-Computer ntpd[191]: time reset -0.496917 s
Apr 13 03:15:03 Marc-Weinbergs-Computer cp: error processing extended attributes: Operation not permitted
Apr 13 07:15:03 Marc-Weinbergs-Computer postfix/postqueue[1778]: warning: Mail system is down -- accessing queue directly
Apr 13 03:15:03 Marc-Weinbergs-Computer cp: error processing extended attributes: Operation not permitted
Apr 13 15:53:53 Marc-Weinbergs-Computer KernelEventAgent[62]: tid 00000000 received unknown event (256)
Apr 13 15:53:54 Marc-Weinbergs-Computer KernelEventAgent[62]: tid 00000000 received unknown event (256)
Apr 13 22:15:48 localhost kernel[0]: standard timeslicing quantum is 10000 us
Apr 13 22:15:47 localhost mDNSResponder-108.6 (Jul 19 2007 11: 33:32)[63]: starting
Apr 13 22:15:48 localhost kernel[0]: vmpagebootstrap: 506550 free pages
Apr 13 22:15:47 localhost memberd[70]: memberd starting up
Apr 13 22:15:49 localhost kernel[0]: migtable_maxdispl = 70
Apr 13 22:15:49 localhost kernel[0]: Added extension "com.firmtek.driver.FTATASil3132E" from archive.
Apr 13 22:15:49 localhost kernel[0]: Added extension "com.firmtek.driver.Sil3112DeviceNub" from archive.
Apr 13 22:15:49 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Apr 13 22:15:49 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Apr 13 22:15:49 localhost kernel[0]: using 5242 buffer headers and 4096 cluster IO buffer headers
Apr 13 22:15:49 localhost kernel[0]: AppleKauaiATA shasta-ata features enabled
Apr 13 22:15:49 localhost kernel[0]: DART enabled
Apr 13 22:15:47 localhost DirectoryService[75]: Launched version 2.1 (v353.6)
Apr 13 22:15:49 localhost kernel[0]: FireWire (OHCI) Apple ID 52 built-in now active, GUID 001451ff fe1b4c7e; max speed s800.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:48 localhost lookupd[71]: lookupd (version 369.5) starting - Sun Apr 13 22:15:48 2008
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: Extension "com.microsoft.driver.MicrosoftKeyboardUSB" has no kernel dependency.
Apr 13 22:15:49 localhost kernel[0]: AppleSMUparent::clientNotifyData nobody registed for 0x40
Apr 13 22:15:49 localhost kernel[0]: Security auditing service present
Apr 13 22:15:49 localhost kernel[0]: BSM auditing present
Apr 13 22:15:49 localhost kernel[0]: disabled
Apr 13 22:15:49 localhost kernel[0]: rooting via boot-uuid from /chosen: 82827EDF-0263-3B93-BEED-4B114E820B85
Apr 13 22:15:49 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Apr 13 22:15:49 localhost kernel[0]: Got boot device = IOService:/MacRISC4PE/ht@0,f2000000/AppleMacRiscHT/pci@9/IOPCI2PCIBridge/k2-sat a-root@C/AppleK2SATARoot/k2-sata@0/AppleK2SATA/ATADeviceNub@0/IOATABlockStorageD river/IOATABlockStorageDevice/IOBlockStorageDriver/ST3320620AS Media/IOApplePartitionScheme/AppleHFS_Untitled1@10
Apr 13 22:15:49 localhost kernel[0]: BSD root: disk0s10, major 14, minor 12
Apr 13 22:15:49 localhost kernel[0]: jnl: replay_journal: from: 8451584 to: 11420160 (joffset 0x952000)
Apr 13 22:15:50 localhost kernel[0]: AppleSMU -- shutdown cause = 3
Apr 13 22:15:50 localhost kernel[0]: AppleSMU::PMU vers = 0x000d00a0, SPU vers = 0x67, SDB vers = 0x01,
Apr 13 22:15:50 localhost kernel[0]: HFS: Removed 8 orphaned unlinked files
Apr 13 22:15:50 localhost kernel[0]: Jettisoning kernel linker.
Apr 13 22:15:50 localhost kernel[0]: Resetting IOCatalogue.
Apr 13 22:15:50 localhost kernel[0]: Matching service count = 1
Apr 13 22:15:50 localhost kernel[0]: Matching service count = 1
Apr 13 22:15:50 localhost kernel[0]: Matching service count = 1
Apr 13 22:15:50 localhost kernel[0]: Matching service count = 1
Apr 13 22:15:50 localhost kernel[0]: Matching service count = 1
Apr 13 22:15:50 localhost kernel[0]: Matching service count = 3
Apr 13 22:15:50 localhost kernel[0]: NVDANV40HAL loaded and registered.
Apr 13 22:15:50 localhost kernel[0]: PowerMac112ThermalProfile::start 1
Apr 13 22:15:50 localhost kernel[0]: PowerMac112ThermalProfile::end 1
Apr 13 22:15:50 localhost kernel[0]: SMUNeo2PlatformPlugin::initThermalProfile - entry
Apr 13 22:15:50 localhost kernel[0]: SMUNeo2PlatformPlugin::initThermalProfile - calling adjust
Apr 13 22:15:50 localhost kernel[0]: PowerMac112ThermalProfile::adjustThermalProfile start
Apr 13 22:15:50 localhost kernel[0]: IPv6 packet filtering initialized, default to accept, logging disabled
Apr 13 22:15:50 localhost kernel[0]: BCM5701Enet: Ethernet address 00:14:51:61:ee:78
Apr 13 22:15:50 localhost kernel[0]: BCM5701Enet: Ethernet address 00:14:51:61:ee:79
Apr 13 22:15:51 localhost lookupd[86]: lookupd (version 369.5) starting - Sun Apr 13 22:15:51 2008
Apr 13 22:15:51 localhost kernel[0]: jnl: replay_journal: from: 21611008 to: 7857152 (joffset 0x952000)
Apr 13 22:15:51 localhost kernel[0]: jnl: replay_journal: from: 673280 to: 24382976 (joffset 0x952000)
Apr 13 22:15:51 localhost kernel[0]: jnl: replay_journal: from: 3890176 to: 6294016 (joffset 0x7d01000)
Apr 13 22:15:51 localhost diskarbitrationd[69]: disk0s10 hfs 82827EDF-0263-3B93-BEED-4B114E820B85 NewestSeagate /
Apr 13 22:15:52 localhost kernel[0]: NVDA,Display-A: vram [90020000:10000000]
Apr 13 22:15:52 localhost mDNSResponder: Adding browse domain local.
Apr 13 22:15:53 localhost kernel[0]: hfs mount: enabling extended security on Maxtor
Apr 13 22:15:53 localhost diskarbitrationd[69]: disk1s3 hfs 0DBE2113-B1F5-388F-BF70-2E366A095330 Maxtor /Volumes/Maxtor
Apr 13 22:15:54 localhost kernel[0]: NVDA,Display-B: vram [94000000:08000000]
Apr 13 22:15:54 Marc-Weinbergs-Computer configd[67]: setting hostname to "Marc-Weinbergs-Computer.local"
Apr 13 22:15:54 Marc-Weinbergs-Computer /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Apr 13 22:15:56 Marc-Weinbergs-Computer diskarbitrationd[69]: disk2s3 hfs 971CABB3-C211-38FC-8E91-6B4F8EA5FA20 B08-09-07 /Volumes/B08-09-07
Apr 13 22:15:56 Marc-Weinbergs-Computer loginwindow[110]: Login Window Started Security Agent
Apr 13 22:15:57 Marc-Weinbergs-Computer kernel[0]: AppleBCM5701Ethernet - en1 link active, 1000-Mbit, full duplex, symmetric flow control enabled
Apr 13 22:15:57 Marc-Weinbergs-Computer configd[67]: AppleTalk startup
Apr 13 22:15:57 Marc-Weinbergs-Computer TabletDriver[119]: #### GetFrontProcess failed to get front process (-600)
Apr 13 22:15:59 Marc-Weinbergs-Computer configd[67]: posting notification com.apple.system.config.network_change
Apr 13 22:16:00 Marc-Weinbergs-Computer configd[67]: posting notification com.apple.system.config.network_change
Apr 13 22:16:00 Marc-Weinbergs-Computer configd[67]: executing /System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/enable-net work
Apr 13 22:16:00 Marc-Weinbergs-Computer configd[67]: posting notification com.apple.system.config.network_change
Apr 13 22:16:01 Marc-Weinbergs-Computer lookupd[123]: lookupd (version 369.5) starting - Sun Apr 13 22:16:01 2008
Apr 13 22:16:01 Marc-Weinbergs-Computer kernel[0]: HFS: Removed 2 orphaned unlinked files
Apr 13 22:16:01 Marc-Weinbergs-Computer diskarbitrationd[69]: disk3s3 hfs CDA8BCC5-0CE4-33E8-A910-4B0952DBC230 FullBU-09-07 /Volumes/FullBU-09-07
Apr 13 22:16:04 Marc-Weinbergs-Computer configd[67]: target=enable-network: disabled
Apr 13 22:16:05 Marc-Weinbergs-Computer configd[67]: AppleTalk startup complete
Apr 13 22:16:09 Marc-Weinbergs-Computer TabletDriver[237]: #### GetFrontProcess failed to get front process (-600)
Apr 13 22:16:09 Marc-Weinbergs-Computer launchd[241]: com.wacom.wacomtablet: exited with exit code: 253
Apr 13 22:16:09 Marc-Weinbergs-Computer launchd[241]: com.wacom.wacomtablet: 9 more failures without living at least 60 seconds will cause job removal
Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:28 EDT 2008] : ATA device 'ST3320620AS', serial number '6QF0L6LR', reports it is functioning at a temperature of 95.0F (35C) degrees.
Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:28 EDT 2008] : Spare blocks for ATA device 'ST3320620AS', serial number '6QF0L6LR', appear to still be available. (Total Available: 36) (Use Attempts: 0)
Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:29 EDT 2008] : ATA device 'ST3320620AS', serial number '6QF0LGS4', reports it is functioning at a temperature of 100.4F (38C) degrees.
Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:29 EDT 2008] : Spare blocks for ATA device 'ST3320620AS', serial number '6QF0LGS4', appear to still be available. (Total Available: 36) (Use Attempts: 0)
Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:29 EDT 2008] : ATA device 'ST3320620AS', serial number '9RV000FC', reports it is functioning at a temperature of 95.0F (35C) degrees.
Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:29 EDT 2008] : Spare blocks for ATA device 'ST3320620AS', serial number '9RV000FC', appear to still be available. (Total Available: 36) (Use Attempts: 0)
Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:29 EDT 2008] : ATA device 'Maxtor 6B300S0', serial number 'B6211G0H', reports it is functioning at a temperature of 89.6F (32C) degrees.
Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:29 EDT 2008] : Spare blocks for ATA device 'Maxtor 6B300S0', serial number 'B6211G0H', appear to still be available. (Total Available: 63) (Use Attempts: 0)
Apr 13 22:16:54 Marc-Weinbergs-Computer /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder: _TIFFVSetField: tiff data provider: Invalid tag "Copyright" (not supported by codec).\n
Apr 13 22:16:54 Marc-Weinbergs-Computer /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder: _TIFFVSetField: tiff data provider: Invalid tag "Copyright" (not supported by codec).\n
etc.

Hi-
The machine seems to be having trouble with loading certain drivers, but, as this isn't a crash log, and doesn't show the "hang-up" or freeze, it's hard to tell.
Noted possibilities are:
-Microsoft keyboard (possible USB power problem)
-firmtek driver (from archive) questionable due to the "archive" annotation
-Wacom tablet driver, causing system problems
Running in Safe mode without freezes would help to determine if one of these drivers is the problem.
Other possibilities are outdated drivers, or simply a need to reinstall the OS.
If unnecessary, removing the driver(s) would be a good idea.
External USB and Firewire devices are all suspect, should all be disconnected, revert to Apple keyboard, and test system performance. Adding one device at a time, and testing each will be necessary to clear each device.
I have experienced system trouble when a Wacom tablet was not connected, but the driver was left installed.
Disabling the driver from Startup items may be necessary to test without the Wacom tablet connected.

Constant lock ups with Leopard!

I find myself having to hold in the power button to turn my computer off almost everyday now! I am not sure what is causing these constant lock ups! Ever since upgrading to Leopard have I noticed this. Yesterday It happened when trying to open iTunes. Today it happened when I clicked on MAIL. The icon just bounces in the dock and nothing happens. I hit FORCE QUIT and that doesn't work either.
Do I need to clear something out or get rid of something? Even when I try to restart my computer sometimes that will lock up too! The only way to get around any of these issues is to hold in the power button to turn the whole computer off, wait a few seconds and turn it back on. Once its back on, then I have full functionality out the computer again but its getting on my nerves that I have to do this all to often!
I think they are some cool features with Leopard but I am experiencing way to many bugs/problems with it to be 100% happy with it.
As I am writing this posting, I just clicked on my APPLE icon in the top left of the screen and then clicked ABOUT THIS MAC to make sure I was using the most current version, and NOTHING happened!

Try reinstalling. It sounds like you did an upgrade from an earlier version that may have been corrupt to start with. You may be able to do the following:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

BSOD / Lock-ups with new Q9550 in P965 Platinum

MSI P965 Platinum Mobo
E6700 CPU, recently upgraded to Q9550
Zalman Cu heat sink + fan.
4GB Corsair 6400 C4 (4-4-4-12 800 MHz)
MSI 8800 GTX graphics
Auzentech Meridian sound
2 x 36GB Raptors RAID 0 (System)
2 x 250 GB Western Digital Caviar WD2500KS RAID 0 (Data)
Corsair HX620W PSU
All drives attached to the ICH8R Intel RAID controller.
BIOS: 1.8 (latest)
Vista Ultimate 32 bit SP1 + latest patches
Intel Matrix Storage Manager v8.6
Hi all,
I have run with the above hardware specification since Jan 2007 without experiencing any hardware problems at all. Two weeks ago I upgraded the CPU from an E6700 dual-core to a Q9550 quad. I was a little concerned about doing this, because the P965 supports a max FSB of 1066 and the Q9550 is rated at 1333. In any case, I Googled around and found that some flavours of the Q9550 had been tested on my mobo (http://www.cpu-upgrade.com/mb-MSI/P965_Platinum_(MS-238).html) and also MSI list the Q9550 stepping C1 as being compatible so I took the leap.
Early indications were good - Vista detected the new chip and I rebooted when prompted. However, in the space of two weeks I have experienced around one or two BSODs per day STOP 101 or 124 codes. Hmm!
I have switched back to my trusty E6700 chip and the system is then as solid as a rock. I see 3 possibilities here:
1.The Mobo website (MSI P965) lists the Q9550 stepping type C1 as being compatible. There is no mention of E0 or C0 which seem to be the other two variants. I have no idea which stepping type mine is as the product numbers for the Q9550 chips are all the same (EU80569PJ073N or BX80569Q9550) regardless of whether it is a C0, C1 or E0 stepping. Is there any way to tell which on I have - I tried with CPU-Z but didn't spot the stepping type? In any case, could this be the problem or am I off-base?
2. It's possible I have a faulty chip. How likely is this do you think? I could ask for a swap with Novatech but could be back in the same boat, and they will reject the return unless it is 'proven faulty'.
3. I need to mod the clocking on my rig to support the Q9550. If so, can anyone advise on what I should do?
I doubt the problem is caused by an OS factor as I ran some tested in an XP pre-boot environmet and still got the lock-ups.
What should I do? i don't really want to ebay the chip at say a £50 loss if i can help it.
Many thanks in advance.

Quote
I have no idea which stepping type mine is as the product numbers for the Q9550 chips are all the same (EU80569PJ073N or BX80569Q9550) regardless of whether it is a C0, C1 or E0 stepping.
No, the OEM Order Code is different, and the sSpec Number also.
Have a look at these links
Q9550=SLAWQ=C1--> http://processorfinder.intel.com/details.aspx?sSpec=SLAWQ
Q9550=SLB8V=E0 --> http://processorfinder.intel.com/details.aspx?sSpec=SLB8V

Issues (Lock ups) with iTunes 10.6.3

Hi everyone!
I've recently updated my windows 64-bit version of iTunes to 10.6.3 and ever since I'm getting slow response times (ok, that actually occured in the preceding version, too) and lock ups by not doinig anything special other than flipping through my music and deleting or adding files. I'm not even talking about synchronization with other devices here, but simple managing tasks.
Has anybody the same issues or ist it just me. Mr. Google could not help me out on this one
I'm pretty dissappointed and haven't had any othe bad experience with Apple yet. But this is unbearable...

You may be seeing something like what is described in this Apple article -> Apple software on Windows: May see performance issues and blank iTunes Store
If it's what you're seeing, you can try resetting Winsock as a temporary fix or folllow along with the article.
1. To do so, please do the following in an administrator user:
Windows Vista and Windows 7: Right click All Programs and choose Accessories > Command Prompt. Choose to open as an administrator.
Windows XP: Click Start > Run and type in cmd.
2. Enter the following command:
netsh winsock reset
3. Restart the computer and test the issue.
Note: If the issue returns, third-party software may be reinserting the LSP.

Constant stream of lock ups with Lion 10.7.2

At my wits end since upgrading to Lion (10.7.2). I get a constant stream of application lock ups (beach ball) on every app I try: Firefox (8.0.1) , intermitent connectivity to Internet (although I know my connection is good); App Store unable to connect; iTune unable to connect to store; Parallels Desktop locks up; Outlook (Office Mac 2011) locks up, Time Machine locks up, and more not mentioned. None of these seem to occur at the same time; it's more like the app that decides to not work is random. Firefox is good but App Store will not connect; iTunes is good, but Firefox will not connect.
Each time I'm forced to restart or shutdown only to have similar, but not the same, errors after I log back on. The errors (lock ups) started right after the upgrade and have gotten progressively worse as the days/weeks go by. At the point now where the PC is completely unreliable. It's a crap shoot to find out what is working and what is not.
I've tried about everything mentioned in the forums -- verified/fixed permissions, used Mac OS install DVD to verify/fix HDD issues; no help.
Prior to upgrade, I had zero issues running SL -- all of this started with Lion.

simon57 wrote:
In any case, shouldn't Software Update recognise what I am running and what is needed to update it successfully?
To a point. It will inform you of a system update, as with Lion 10.7.2 for example, but that is not the combo update. I set my Systum Updates to install manually, if I see an OS update, I always go to
http://support.apple.com/downloads/
And choose the Combo update whice is always a little bigger, but a cumulative install as mentioned. Always appears to be more stable.
Cheers

[SOLVED] Long time with excessive disk access before system reboot.

I feel I would be grateful for some help here. It's my first go at Arch Linux having used Xubuntu for several years. It may be I'm missing something obvious but then I would be happy if someone could point me in the right direction.
Problem: When I do a system restart by issuing
$ systemctl reboot
I get the following output
Sending SIGTERM to remaining processes...
Sending SIGKILL to remaining processes...
Unmounting file systems.
Unmounted /sys/kernel/debug.
Unmounted /dev/hugepages.
Unmounted /dev/mqueue.
Not all file systems unmounted, 1 left.
Disabling swaps.
Detaching loop devices.
Detaching DM devices.
Unmounting file systems.
Not all file systems unmounted, 1 left.
Cannot finalize remaining filesystems and devices, giving up.
Successfully changed into root pivot.
Unmounting all devices.
Detaching loop devices.
Diassembling stacked devices.
mdadm: stopped /dev/md126
[ 1654.867177] Restarting system.
However, after the last line is printed, the system does not reboot immediately but hangs for about 2 minutes with heavy disk activity. I can't say if it is read or write or both, but the led of my HDD is lit constantly. When this activity stops, the machine reboots.
$ systemctl poweroff
works as expected, i.e. shuts down immediately without excessive disk access.
I see this behaviour both with the installed Arch system and when I run the live installation/recovery CD. It is also the same if I boot into the busybox rescue shell and then restarts the machine from there. It also does not seem to matter if any partition on the disk is is mounted or not, the behaviour is always the same with 2 min. heavy activity before reboot.
System setup:
Sony Vaio VPZ13. Intel Core i5 M460, 4GB ram, 2x64GB SSD in RAID0 configuration via bios setting (a.k.a. fake raid), partitioned like:
windows boot
windows system
linux swap
linux "/"
linux "/home"
So it's a dual boot setup with Windows 7.
The raid array is assembled by mdadm, and I have mdadm_udev among my mkinitcpio.conf hooks (after blocks but before filesystems).
Snip from journalctl log showing actions when reboot has been issued:
jan 18 12:24:23 wione systemd[1]: Stopping Sound Card.
jan 18 12:24:23 wione systemd[1]: Stopped target Sound Card.
jan 18 12:24:23 wione systemd[1]: Stopping Bluetooth.
jan 18 12:24:23 wione systemd[1]: Stopped target Bluetooth.
jan 18 12:24:23 wione systemd[1]: Stopping Graphical Interface.
jan 18 12:24:23 wione systemd[1]: Stopped target Graphical Interface.
jan 18 12:24:23 wione systemd[1]: Stopping Multi-User.
jan 18 12:24:23 wione systemd[1]: Stopped target Multi-User.
jan 18 12:24:23 wione systemd[1]: Stopping Login Prompts.
jan 18 12:24:23 wione systemd[1]: Stopped target Login Prompts.
jan 18 12:24:23 wione systemd[1]: Stopping Getty on tty1...
jan 18 12:24:23 wione systemd[1]: Stopping Login Service...
jan 18 12:24:23 wione login[333]: pam_unix(login:session): session closed for user root
jan 18 12:24:23 wione login[333]: pam_systemd(login:session): Failed to connect to system bus: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
jan 18 12:24:23 wione systemd[1]: Stopped D-Bus System Message Bus.
jan 18 12:24:23 wione systemd[1]: Stopped Getty on tty1.
jan 18 12:24:23 wione systemd[1]: Stopping Permit User Sessions...
jan 18 12:24:23 wione systemd[1]: Stopped Permit User Sessions.
jan 18 12:24:23 wione systemd[1]: Stopped Login Service.
jan 18 12:24:23 wione systemd[1]: Stopping Basic System.
jan 18 12:24:23 wione systemd[1]: Stopped target Basic System.
jan 18 12:24:23 wione systemd[1]: Stopping Dispatch Password Requests to Console Directory Watch.
jan 18 12:24:23 wione systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch.
jan 18 12:24:23 wione systemd[1]: Stopping Daily Cleanup of Temporary Directories.
jan 18 12:24:23 wione systemd[1]: Stopped Daily Cleanup of Temporary Directories.
jan 18 12:24:23 wione systemd[1]: Stopping Sockets.
jan 18 12:24:23 wione systemd[1]: Stopped target Sockets.
jan 18 12:24:23 wione systemd[1]: Stopping D-Bus System Message Bus Socket.
jan 18 12:24:23 wione systemd[1]: Closed D-Bus System Message Bus Socket.
jan 18 12:24:23 wione systemd[1]: Stopping System Initialization.
jan 18 12:24:23 wione systemd[1]: Stopped Setup Virtual Console.
jan 18 12:24:23 wione systemd[1]: Unmounting Temporary Directory...
jan 18 12:24:23 wione systemd[1]: Unmounted Temporary Directory.
jan 18 12:24:23 wione systemd[1]: Unmounted /home.
jan 18 12:24:23 wione systemd[1]: Starting Unmount All Filesystems.
jan 18 12:24:23 wione systemd[1]: Reached target Unmount All Filesystems.
jan 18 12:24:23 wione systemd[1]: Stopping Local File Systems (Pre).
jan 18 12:24:23 wione systemd[1]: Stopped target Local File Systems (Pre).
jan 18 12:24:23 wione systemd[1]: Stopping Remount Root and Kernel File Systems...
jan 18 12:24:23 wione systemd[1]: Stopped Remount Root and Kernel File Systems.
jan 18 12:24:23 wione systemd[1]: Starting Shutdown.
jan 18 12:24:23 wione systemd[1]: Reached target Shutdown.
jan 18 12:24:23 wione systemd[1]: Starting Save Random Seed...
jan 18 12:24:23 wione systemd[1]: Starting Update UTMP about System Shutdown...
jan 18 12:24:23 wione systemd[1]: Started Save Random Seed.
jan 18 12:24:23 wione systemd[1]: Started Update UTMP about System Shutdown.
jan 18 12:24:23 wione systemd[1]: Starting Final Step.
jan 18 12:24:23 wione systemd[1]: Reached target Final Step.
jan 18 12:24:23 wione systemd[1]: Starting Reboot...
jan 18 12:24:23 wione systemd[1]: Shutting down.
jan 18 12:24:23 wione systemd-journal[189]: Journal stopped
-- Reboot --
Since I have used Xubuntu without hassle for several years, I first thought the problem may be related to systemd reboot and something in my system setup. But I have tried the Fedora 17 live CD and rebooting there works as expected. So, since it works in one systemd distro, it should work with Arch as well.
Then I thought that it maybe had something to do with the raid-array, something along the lines of
https://bugzilla.redhat.com/show_bug.cgi?id=752593
https://bugzilla.redhat.com/show_bug.cgi?id=879327
But then I found the shutdown hook for mkinitcpio and now I see that the array is stopped and dissassembled. So thats not the problem either. (Or thats what I guess at least.)
Unfortunately I'm out of ideas. Any help would be grateful.
Last edited by wingbrant (2013-02-02 22:20:20)

It turned out that the magic word for me was "reboot=pci" on the kernel command line. With that option set it works lika a charm The machine reboots nice and clean.

My ipad3 is locked up with message Cannot Access my Friends

My Ipad is locked up with the message Cannot Access Find my Friends - I cannot power down or anything - any ideas.
Thanks
Michael

Try a reset:
Hold the Sleep and Home button down for about 10 second until you see the Apple logo.

VM server locking up with 153 Disk warnings

I have a 2012 host running Hyper-V. There are 3 guest VMs all running Server 2012. One of them has started experiencing a problem where it will lock up with the only way to get at it is to do a Turn Off in Hyper-V Manager.
The problem always occurred during the nightly backups. Windows Server Backup is used and the destination is a VHDX file located on a removable cartridge on the host server. This is the same setup for all 3 VMs. The other two do not have any problem with
this and this one has operated for about a year without a problem with this. I can do a one time backup using the same parameters as the scheduled backup and they all complete successfully with no lockup of the server.
I finally deleted the VHDX file and created a new one. I also deleted the backup job and created a new one. Backups ran fine for just over a week, then the lockups of the server started again.
The only seemingly consistent evidence I can find is 153 Disk warnings in the System log. These seem to occur during the backup process. My research indicates some sort of disk system problem.
Any ideas?
Jonathan

This post
suggests that IO requests are timing out and that you should investigate the physical disks' health.
Also, upgrade to 2012 R2 on the host if you could, make sure the host is fully patched, and that the guest has the correct version of Hyper-V Integration Service.
Sam Boutros, Senior Consultant, Software Logic, KOP, PA http://superwidgets.wordpress.com (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable) _________________________________________________________________________________
Powershell: Learn it before it's an emergency http://technet.microsoft.com/en-us/scriptcenter/powershell.aspx http://technet.microsoft.com/en-us/scriptcenter/dd793612.aspx
These are virtual disks so there is nothing physical to investigate. As I said I created a new virtual disk and it helped for a short while.
Upgrading to R2 is not an option as everything else concerning this Hypver-V setup is working just fine, this is the only problem. And the customer is not going to fork out money for a new license just because of this one problem. This is something that
needs fixing with what OS is there.
Jonathan
The post suggests you investigate the physical disks on top of which the VHDX file lie.
Sam Boutros, Senior Consultant, Software Logic, KOP, PA http://superwidgets.wordpress.com (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable) _________________________________________________________________________________
Powershell: Learn it before it's an emergency http://technet.microsoft.com/en-us/scriptcenter/powershell.aspx http://technet.microsoft.com/en-us/scriptcenter/dd793612.aspx

Lock ups with ti-5900 MS-8929

After about 5 minutes of running a game (/a 3d app) the comp freezes up, the audio still plays just the screen locks up. I think this may have something to do with the gpu. Ive got all the latest drivers etc.
The driver thing says the gpu is usually 45c idle and 50-60 in game. CPU is 40c.
system:
K7N2 Delta-ILSR
GFX TI-5900 MS-MS-8929
Athlon XP 2500+ Barton
1024mb of DDR333
SB Audigy 2

nope still crashed, and i didnt even have to get in the game, it crashed on the menu.
Here is an updated irq list, thx for help.
IRQ 0   System timer   OK
IRQ 1   Easy Internet Keyboard   OK
IRQ 3   Communications Port (COM2)   OK
IRQ 4   Communications Port (COM1)   OK
IRQ 6   Standard floppy disk controller   OK
IRQ 8   System CMOS/real time clock   OK
IRQ 9   Microsoft ACPI-Compliant System   OK
IRQ 11   NVIDIA nForce PCI System Management   OK
IRQ 13   Numeric data processor   OK
IRQ 19   MSI MS-StarForce GeForce FX 5900 (NVIDIA GeForce FX 5900)   OK
IRQ 20   Standard OpenHCD USB Host Controller   OK
IRQ 20   NVIDIA(R) nForce(TM) MCP Audio Processing Unit (Dolby(R) Digital)   OK
IRQ 21   Standard Enhanced PCI to USB Host Controller   OK
IRQ 21   NVIDIA(R) nForce(TM) Audio Codec Interface   OK
IRQ 21   NVIDIA NForce MCP2 IDE Controller   OK
IRQ 22   Standard OpenHCD USB Host Controller   OK
IRQ 22   NVIDIA nForce MCP Networking Controller   OK
I/O Port 0x00000000-0x00000CF7   PCI bus
I/O Port 0x00000000-0x00000CF7   Direct memory access controller
I/O Port 0x000003C0-0x000003DF   NVIDIA nForce2 AGP Host to PCI Bridge
I/O Port 0x000003C0-0x000003DF   MSI MS-StarForce GeForce FX 5900 (NVIDIA GeForce FX 5900)
IRQ 20   Standard OpenHCD USB Host Controller
IRQ 20   NVIDIA(R) nForce(TM) MCP Audio Processing Unit (Dolby(R) Digital)
IRQ 21   Standard Enhanced PCI to USB Host Controller
IRQ 21   NVIDIA(R) nForce(TM) Audio Codec Interface
IRQ 21   NVIDIA NForce MCP2 IDE Controller
Memory Address 0xD8000000-0xDFFFFFFF   NVIDIA nForce2 AGP Host to PCI Bridge
Memory Address 0xD8000000-0xDFFFFFFF   MSI MS-StarForce GeForce FX 5900 (NVIDIA GeForce FX 5900)
IRQ 22   Standard OpenHCD USB Host Controller
IRQ 22   NVIDIA nForce MCP Networking Controller
Memory Address 0xE1000000-0xE2FFFFFF   NVIDIA nForce2 AGP Host to PCI Bridge
Memory Address 0xE1000000-0xE2FFFFFF   MSI MS-StarForce GeForce FX 5900 (NVIDIA GeForce FX 5900)
Memory Address 0xA0000-0xBFFFF   PCI bus
Memory Address 0xA0000-0xBFFFF   NVIDIA nForce2 AGP Host to PCI Bridge
Memory Address 0xA0000-0xBFFFF   MSI MS-StarForce GeForce FX 5900 (NVIDIA GeForce FX 5900)
I/O Port 0x000003B0-0x000003BB   NVIDIA nForce2 AGP Host to PCI Bridge
I/O Port 0x000003B0-0x000003BB   MSI MS-StarForce GeForce FX 5900 (NVIDIA GeForce FX 5900)

Qosmio X505-Q870 with "slow" disk access

i"ve got a several month old X505 870 with 4GB of memory and TWO Hitachi 7200 rpm 500GB SATA II hard drives. The system is used primarily for initial examination of digital images, with each image being around 20MB. Accessing images to display previews is perceptibly slow. YES, the system is tuned to the best of my ability. YES, both disks have been, and are REGULARLY defragmented - both show 0% fragmentation. YES, I've thrown away the original O/S with all the trialware, stupidity, and goop, and installed W7, 64-bit. YES, all the drivers I'm aware of are current, including the Intel storage drivers. NO, other than the periodic Side-By-Side errors that show up every couple days, I'm NOT getting application or system errors.
In Bridge or Lightroom I"m not getting CPU bound, but this thing beats on the disk(s) quite a bit, and takes MUCH longer than the desktop system to display images. YES, the desktop is a slightly faster CPU, but it
also has standard 7200 rpm drives for images, and it's SIGNIFICANTLY faster at retrieving and displaying images in Bridge or Lightroom...
Is there any PRACTICAL (no, putting in 2, 500GB SSD drives is NOT practical) thing that can be done to improve disk performance on this box, 'cause right now it certainly isn't any speedster?

I don't have any empirical evidence about whether the original installation was this slow, but my recollection is the reason I dumped an re-installed a clean W7 was because the original was REALLY a dog. I also wanted to put partitions on the drives and the original installation caused problems with the partitioning... But, I'm confident that the original was definitely not faster...
As far as drivers, I believe I have everything current.
My antivirus is Microsoft Security Essentials, but I currently have it turned off. So that's probably not the issue.....
As far as "is it really slow", I can't say. It's SLOWER, but I suppose if you're not doing anything very demanding it'd probably be all right. It's just significantly slower doing what I do, than my desktop. I don't have anything else to compare it to, but it SEEMS (the ever popular "seems") to me that a quad-core with 4GB of memory and 7200 rpm drives should be extremely quick to pull up images and render previews. But, I'll admit my expectations may be too high.
Which is why I'm hoping there's something I've neglected that'll make things perform better. I even dumbed down the interface with the "best performance versus best appearance" thing to see if that'd help. Didn't.

Lock Ups with MSI K7N2 Delta-ILSR [Resolved] thnx!

Well this is a first for me and it is driving me nucking futs !,
I have been building my own pc's for at least 10 years now and never had a problem where I have even needed to come to a forum like this. So as I see there are some very helpful and knowledgable peeps (nice work guys) here I thought I would ask as I have read through all stickies etc... and have not actually seen an answer to the problems of locking up. I am fast forming the opinion that this motherboard has a serious problem that MSI have not fixed yet. Anyway here is some info on the spec and what I have tried so far :
Have checked for viruses...
Did a fresh format and re-install...
Unplugged all that is not essential to run...
Symptoms..
Cannot write files to make a DVD in any authoring program.. it locks up after about 5 minutes
Locks up in most Games, some run for 5 mins then other times run for hours
Cannot run some setup.exe files (Like Zone Alarm Pro)
Sometimes (locks up just surfing)
Microsoft Word seems to mess up a lot and have to run the repair option..
IRQ Settings
IRQ 0   System timer   OK
IRQ 1   Easy Internet Keyboard   OK
IRQ 3   Communications Port (COM2)   OK
IRQ 8   System CMOS/real time clock   OK
IRQ 9   Microsoft ACPI-Compliant System   OK
IRQ 10   NVIDIA nForce PCI System Management   OK
IRQ 13   Numeric data processor   OK
IRQ 14   NVIDIA nForce 2 ATA Controller (v2.5)   OK
IRQ 15   NVIDIA nForce 2 ATA Controller (v2.5)   OK
IRQ 17   Creative SB Audigy   OK
IRQ 18   OHCI Compliant IEEE 1394 Host Controller   OK
IRQ 18   WinXP Promise FastTrak 376/378 (tm) Controller   OK
IRQ 19   NVIDIA GeForce4 Ti 4600   OK
IRQ 20   Standard OpenHCD USB Host Controller   OK
IRQ 21   NVIDIA nForce Networking Controller   OK
IRQ 22   Standard OpenHCD USB Host Controller   OK
Readings from MSI PC Alert 4
CPU Temp    : 48 C
System Temp    : 33 C
Vcore       : 1.63
3.3V       : 3.31
+5v       : 5.00
+12v       : 11.70
I am about seriously considering giving this board some cement legs and drowning it ! This is my first (and probably last) MSI board and cannot believe the problems so many seem to have. Maybe best and quickest option is to do just that and go buy a decent board.
Any help much appreciated.

Hi,
First of all thanks to all for the help, and CJLittle...LMAO ! My car is a Scooby and a nice blue paint job ! Believe it or not they assured me all this would work.. I bought it in one package and even questioned it. Also to be fair up until then they had always been very good... shows they have no zero about 3200XP 200 fsbetc... When I went back with the power supply and told them they changed it out and let me off on the extra money it should have been.
The crashes are as follows :-
[list=1]
Locks up after random amounts of time in games, sometimes dont even get to load it up at all, other times I can play 2 hours. When the games lock up usually there is a high pitch squeal and can only get out of it by reset or power off.
I cannot install Zone Alarm Pro or Agnitum Outpost are 2 anyway (there are others) these just come up with the installer screen and hangs there, I have to go to Task Manager to close them down, unlike the lock up in games.
The cooler is the Coolermaster Jet... and the temperature is more than acceptable (right now is 44 C) so I cannot see that at all being a factor.
leds are on on the d bracket when it locks, I did not know of this function and will check it out. Thanks for that tip.[/list=1]
Question from me: would the 2700 RAM cause these lockups ? I would have thought it would just not work at all ? If this is possible then I will go and change out the RAM as tuning it down to 166 (if it is possible) does not appeal to me ! But yes it may show what the problem is.
Thanks again, will see what happens...

Zen Micro - transfer lock ups with latest firmwa

I've been trying to transfer mp3 files to my firmware upgraded Zen Micro and find that the transfer slows down and then locks the player after 30-40 files have successfully copied. This happens with ..0 and 2.2.02 firmwares.
The player will then remain in a 'acti've' docked state (black arrows) until the battery is removed. After this lock up tags on the mp3 files are messed up and display Chinese looking characters in the Details View.
This happens on two different computers with USB2.0, one Intel based and the other AMD.
Two questions - anyone know if this is a known issue being worked on for an imminent firmware update? And secondly - is the problem aggravated (or even created) because I am trying to copy files over from a directory tree (mp3's sorted into artist/album/ folders) rather than one flat folder with all mp3s in it (ie. in one single folder).

nzOdy wrote:
I've been trying to transfer mp3 files to my firmware upgraded Zen Micro and find that the transfer slows down and then locks the player after 30-40 files have successfully copied. This happens with ..0 and 2.2.02 firmwares.
The player will then remain in a 'acti've' docked state (black arrows) until the battery is removed. After this lock up tags on the mp3 files are messed up and display Chinese looking characters in the Details View.
This happens on two different computers with USB2.0, one Intel based and the other AMD.
Two questions - anyone know if this is a known issue being worked on for an imminent firmware update? And secondly - is the problem aggravated (or even created) because I am trying to copy files over from a directory tree (mp3's sorted into artist/album/ folders) rather than one flat folder with all mp3s in it (ie. in one single folder).
I'd try transferring fewer files at a time and see if that works.
You might be on to something with copying from a directory tree too. See if transferring the files in smaller groups from one folder helps out.
You can always organize the artists/albums later in Zen Micro Media Explorer or Creative MediaSource.

Overheating and Lock ups with MSI TI4200 128DDR

This card seems to overheat and lock up during game play.
Does anyone have a solution?
My system:
P4 1.8Ghz 512K
Intel D845WNL
512 Mb PC133
SB Live 5.1
MSI TI4200 128DDR
WIN 98SE
300W PSU in a standard P4 case
No overclocking
Currently I play games with the case open and an external fan blowing into it.
This as fixed the problem.
I looking for a permanent solution.
Should I get a better PSU?
...or should I just get an ATI 9700 Pro

From what you said your PSU is handling the load but having a dual fan PSU will help temps by maybe a degree or two.
You may not have adequate ventilation and need to ad some fans to your case but that may be the straw that breaks the camels back if you are on the edge as far as adequate power is concerned.
There are quite a few folks that run with the side covers off but you have to keep in mind the ambient temperature where the PC is being used in any case.
So far my experience with GF4 cards is they inherently run hot and can raise the temp in your case several degrees. Nature of the beast.
Bottom line, better cooling and airflow is paramount and take a look at the heatsink, it may have been mounted poorly...this happens with any manufacturer at times and I usually re-mount it with a thermal paste of my preference. Keep in mind you will probably void your warranty with the manufacturer should you need to return or RMA the product.

W520 lock-ups with 100% disk access

Similar Messages

Maybe you are looking for