W520 No sound with ASUS PA248 Monitor connected via Displayport

When I connect my external monitor (ASUS PA248) to my W520, the audio disappears.  When I disconnect it, the audio returns.  This seems a bizarre link between audio and video, but there it is.  Note that the PA248 does NOT have built-in speakers.
Does anyone have any ideas?
Solved!
Go to Solution.

Yes, that was it.  I have a bluetooth adapter connected to my Yamaha 5.1 system, and I stream music to it from my PC.  Somehow the default was changed to the bluetooth.  I have set it back to the Conexant Audio.
Even so, it is extremely odd that if I disconnected the monitor, the sound returned.

Similar Messages

  • Imac 27" Intel Core 7 CPU. Screen goes black and will not respond except with a push of power button. Second monitor connected via displayport continues to display fine. Apply Store did full hardware scan and all is fine. Did clean wipe from Mavrick back

    Imac 27" Intel Core7  CPU 16 Gig RAM. Screen goes black and will not respond except with a push of power button. Second monitor connected via displayport continues to display fine. Apply Store did full hardware diagnostic and all is fine. Did clean wipe from Mavrick back to Mountain Lion but problem remains. Apple Store can do no more.

    I did some more digging, it appears to be a backlight problem only. I can see the screen very dimly if I use a bright flashlight in a very dark room. It also seems to run ok if the brightness is turned down a LOT.
    So I'm thinking this is a LED driver board issue or the display itself. I'll open it up and check the connection between the two and see if I can get any more clues. At least I can use it somewhat now by dimming the display significantly...

  • X240 (Win 8.1) w/ Ultra Dock and two external monitors connected via DisplayPort problem

    I'm having trouble making this combination work. This Ultra Dock does have two DP connectors, computer sees both external monitors (HP ZR24w) but I cannot get any picture on both at the same time using DP. Sometimes one display does work, but that is not always working.
    When I connect same monitors via VGA/DSUB and DP (with Lenovo DPtoDVI converter) I can get this to work - both same time - , but I'd prefer them both digital and both native DP as both monitors do have that port.
    Ultra Dock does already have the latest firmware and this problem seems to not relate to the flickering problem with T440 etc. X240 is also running latest UEFI/BIOS and I've also tried latest Intel Beta display driver, no effect.

    shelmers wrote:
    W520 with Win 7 Pro
    Minidock Plus Series 3
    Two Asus monitors attached via DVI
    Let me start by saying that the internal and both external monitors work simultaneously. However, getting to that state is the problem.
    I can boot successfully with the laptop in the dock with 1) just the internal monitor, or 2) the internal and one external monitor connected.
    However, if I try to boot with both monitors connected via DVI, the following happens:
    Windows logon screen appears -- but there is no cursor on the screen
    I enter the password and the login continues for 30-60 seconds, then
    Blue screen SYSTEM_SERVICE_EXCEPTION for nvlddmkm.sys with STOP x0000003B
    Lenovo has replaced the dock with no change in behavior.
    Drivers and BIOS are current.
    Most recent change was to set BIOS so Win 7 automatically detects Nvidia Optimus.
    At this point, my best workaround is to disconnect one external monitor whenever I need to reboot, and then connect it again after everything is runing. Not terrible... but it really shouldn't be necessary. Any suggestions?
    If you want to drive the monitors in the manner stated, the BIOS Display property must be set to Discrete and the auto detection below it must be disabled.

  • I have a macbookpro with a second monitor connected using an Apple connector.  The two screens show different parts of the desktop.  My cat walked across the keyboard, and now the two monitors are showing the same thing.  How do I undo what the cat did?

    I have a macbookpro with a second monitor connected using an Apple connector.  The two screens show different parts of the desktop.  My cat walked across the keyboard touching various keys, and now the two monitors are showing the same thing.  How do I undo what the cat did?

    Have you tried HELP in FINDER?  If you open HELP and enter 'displays' in the field in the upper right hand corner you will get a list of topics on setting up monitors.  Specifically read 'Setting up multiple displays to show the same image' and 'Setting up multiple displays as an extended desktop'.
    Ciao.

  • I have a Airport network at home with a Time capsule connected via ethernet cable to modem. Also the network is extended wirelessley with an Airport Extreme. My question is I now wish to add a second Airport extreme but am considering a hard wire connecti

    I have a Airport network at home with a Time capsule connected via ethernet cable to modem. Also the network is extended wirelessley with an Airport Extreme. I now wish to add a second Airport extreme but am considering a hard wire connection with 100 ft of cat 6 cable from the Time capsule to the second Airport extreme.  Can my network operate properly to extend the network with both a wireless and wired extend functionallity?

    I now wish to add a second Airport extreme but am considering a hard wire connection with 100 ft of cat 6 cable from the Time capsule to the second Airport extreme.
    Excellent plan.
    Can my network operate properly to extend the network with both a wireless and wired extend functionallity?
    Yes, but don't get confused about the second AirPort Extreme, as it would not be configured to "extend" a wireless network.....it would be configured to "create a wireless network" using the same wireless network name, security settings and password as the Time Capsule network. Configure the second Extreme in Bridge Mode.
    This Apple support document will show you how to hookup and configure the second AirPort Extreme:
    http://support.apple.com/kb/HT4260

  • Does anyone get the mouse lag with an external display connected via the display port?

    does anyone get the mouse lag with an external display connected via the display port?

    You don't describe the problem in great detail.  Is this the issue you are describing?
    https://discussions.apple.com/thread/4398076?start=0&tstart=0
    If so, then, "Yes."  I have the same problem.  Note that this isn't a tracking speed problem for me, it's a lag between my hand moving and the pointer moving on the external display.
    Andrew

  • Time machine has losing contact with my external drive, connected via a USB port.

    Recently my Time Machine program has begun losing contact with my external drive, connected via a USB port. When I attempt to open Time Machine, it indicates there is no external hard drive.  When I click on "setting up time machine" it opens airport utility.   I've tried rebooting, run disk utility repairs for both hard discs, pulled and reconnected the USB cable, even completely shut down the system.    Eventually the two re-establish contact, but I'm not certain what I've done that causes this.  The lost contact appears to happen during the weekends.  The external hard drive is a MJaxtor OneTouch 4. What should I be doing to solve this problem once and for all?

    I use a little app named EasyFind - free at the App Store. It will allow you to search individual volumes or all volumes.
    Download it and see if it will help.
    Clinton

  • Been trying to use an external memory card reader with my macbook air- connecting via usb port, air does not recognize device nor the microSD card from my gopro - help

    Been trying to use an external memory card reader with my macbook air… connecting via usb port, air does not recognize device nor the microSD card from my gopro … help

    Some external ones do not work with the Mac's although most do. There are some driver compadibility issues with Mavericks, so I would wait for an update.

  • No sound with Asus Motherboard

    Hi everybody,
    I have a computer with an Asus A8NE-FM. This motherboard has sound with Realtek AC97 ALC655 codec.
    I have installed Solaris 10 and i've tryied all possible drivers available on the Net but does not work :(
    Any idea please ?
    Thanks for your help.

    Thanks for your help.
    I have desactive pnpos and installed oss driver and now it works great !
    However oss is not a freeware :(
    Thanks ;)

  • 2nd Monitor Connected Via DVI to VGA Adapter is Blurry

    I have a G4 dual 1.42 GHz (the last G4 model) and have an Apple 20" Cinema Display connected to the ADC port and a 21" CRT monitor connected to the DVI port via the DVI to VGA adapter supplied with the G4.
    The CRT monitor display is blurry. I have tweaked display settings in System Preferences and the monitor's controls and nothing helps. I used this monitor in a dual monitor setup on a Power Mac 9600/300 and it was razor sharp, so I know that the monitor is okay. I could pull a display card from the old Power Mac 9600 since it's not being used anymore, but I hate to add another card to the G4 because of the heat problems. Any suggestions? Thanks.

    I'm wondering, is it to be expected that the monitor connected to the DVI port via the DVI to VGA adapter won't look anywhere near as good as if it were connected to a separate graphics card? Thanks.

  • TV & monitor connected via DVI to VGA & DVI cable. Wont display

    I have my TV & monitor connected to my mini via DVI(input) to> VGA(output) & DVI(output) splitter cable. I cant get both tv and monitor to work at the same time only one or the other. How can I get this to work?
    Note: I dont want a continuous display, I just want one to show the same as the other. If there both plugged in why dont they both work?

    The answer to your question would require having a block diagram of the mini's graphics sub-system. If the DAC (digital-to-analog converter) behind the VGA port is just driven from the same output as the TMDS transmitter behind the DVI port, then I agree it would be possible that both could output the same screen simultaneously. But if the VGA and DVI ports are treated as seperate channels all the way back to video memory, then likely one would be prioritized over the other, only one could be active, and they would not be able to output simultaneously.
    Another potential problem is that TVs and computer monitors generally want to run at very different formats and they require different signal types to be happy. A TV will want an interlaced output whereas a computer monitor will not. And a TV will want a very low resolution, like 640 x 480, whereas a computer monitor will be happiest at a much higer resolution.
    I hope for you that someone else has this working and chimes in with some practical advice. I try to avoid making posts where I have no practical advice to offer and only bad news, but in this case I thought you might want to know about some potential barriers to success. Good luck.

  • Second iMac as external monitor; Connection via firewire without a deck/cam

    Second iMac as an external monitor; Connection by firewire without a deck/camera possible?
    I spend a lot of hours to find an answer to the following question, unfortunately without any success:
    I’m working with a new iMac (Intel, OS 10.4.11) and Final Cut. Additionally I have an old iMac (G3, OS 10.3.9).
    I would like to use the FireWire port to transport a dv video stream from the new iMac/Final Cut to the old one so that the old one can be used as a monitor. So all I want is a software for the old iMac that shows an incoming FireWire dv-stream as a live picture.
    I tried vlc, videoviewer, iMovie, Vidi and btv. The problem is always the same: Final Cut (on the new iMac) does not find any FireWire/dv-device nor do all these software on the old iMac find a connection to Final Cut. I think the problem is that both sides are seeking for a device-setup at the FireWire-port on the other side. And none of them sends a signal like „yes I’m here and waiting for a dv-stream“.
    Another attempt was ScreenRecycler with VNC-client on the old iMac. Unfortunately on my old iMac Os 10.3.9 is the last possible OS and no vnc client on that system is fast enough to show a video in real time.
    I also tried virtualDV from Apples FireWire SDK 20. It works so far, that it claims to be a dv-device (on the old iMac) and so Final Cut at the new iMac says: „okay I’ll deliver you that stream“. The problem now is that virtualDV only can record that stream, not show it in real time.
    Is there any solution like virtualDV that shows a live preview and turns the iMac in a FireWire dv-device?
    Is there any solution that Final Cut simulates to be a FireWire dv-device itself and that another computer finds that device and understand the dv-stream?
    Thank you very much for your help.
    Message was edited by: baeumer

    Don't think this is possible.
    You're better off using a DAC (for example the one made by Canopus) and put your DV in and get a compatible signal out the other end for connection to your monitor.
    I don't understand why you would want to go through a computer first, it would be a waste of time and add a huge delay to the signal.
    Finally, I wouldn't use a computer monitor as an external display, it would be useless in my experience. Why not just preview on the one you've got by going full screen in FCP? Also using a computer monitor as a preview/output monitor is not a good idea since it's so different from a normal TV and won't show the correct colour space or issues such as flickering and interlace problems, underscan etc etc.
    Seems like you're using a sledgehammer to crack a very small nut and that would be to use a DV camera via firewire and then connect up a monitor from that. (again using a convertor box if you have a connection problem.)

  • Firefox do not work on a monitor connected via HP USB docking station

    Firefox 4 doesn't work on a monitor connected to a HP Docking Station USB 2.0 (AY052AA#AC3). The latest Firefox 3.6 (or is it 3.7) worked perfectly on that monitor (except for Adobe flash player). I usually have that monitor in portrait mode, but neither does it work in landscape mode. I have no problem on the native display on my HP Pavilion dv7-3070ez or on the external display connected directly to the laptop.
    The picture displayed freeze with the content of Firefox 4.0 when moved into the USB connected display from another display. When moved back to one of the 2 other displays, operation returns to normal.

    I  have lost complete functionality of my Kensington Displaylink Adaptor.  It worked just fine on my iMac with Snow Leopard, but does not work with Lion.  I have one screen connected through the display port on the back of the iMac and a second connected through the Kensington DisplayLink.  No signal gets to my monitor from the dispaly link.
    I called Kensington yesterday, and the tech surpirsed to hear that Lion was now available for sale.  The tech said that they should have a new driver out in the next two weeks, but he did not inspire confidence.
    danburdi, I see that you found a Lion driver.  Could you share the link?
    Thanks.

  • 10.5.2 - cannot print with Samsung CLP-510 connected via Airport

    After 10.5.2 Leopard upgrade, the printer Samsung CLP-510 prints only if it's connected directly to my MacBook (or my PowerBook), not if it's connected via Airport (Extreme): the printers become soon busy and give the message "Device busy, please retry...", and after some time the printer print an error page with "timeout" error.
    No luck resetting the Airport.
    Any workaround, please?
    Thanks in advance
    Salvo

    These steps may help:
    1. Open System Preferences and click on the "Print & Fax" icon
    2. Click on the "+" button to add a printer
    3. Click on the "IP" button in the toolbar
    4. Choose "HP Jetdirect - Socket" from the "Protocol" option menu
    5. Enter the hostname or IP of the Airport base station in the "Address" field - typically 10.0.0.1 or your base station name with ".local" on the end
    6. Leave the "Queue" field blank
    7. Replace the auto-generated name with something meaningful to you in the "Name" field
    8. Choose "Select a driver to use" from the "Print Using" option menu, and then type in the model number for your printer to locate the corresponding printer driver
    9. Click "Add" to add the printer, then try printing
    If you report back with your results, it would be appreciated.

  • [SOLVED] No sound with Asus Xonar DGX

    I've got no sound so I've looked into journalctl and there were some bluez and pulseaudio related erros. So i.a.w. this topic https://bbs.archlinux.org/viewtopic.php?id=155714 I did `systemctl enable bluetooth.service`. No more errors but still no sound.
    Other things I did:
    - unplug/plug headphones
    - check whether anything is muted in alsamixer and the gnome sound applet (note: nothing is greyed-out, microphone picks up signals)
    snd_oxygen i.e. ASUS XONAR is the sound card I would like to use and I hook my headphones to.
    # cat /proc/asound/cards
    0 [DGX ]: CMI8786 - Xonar DGX
    C-Media Oxygen HD Audio at 0xee00, irq 17
    1 [HDMI ]: HDA-Intel - HDA ATI HDMI
    HDA ATI HDMI at 0xfd7fc000 irq 30
    # lsmod | grep '^snd' | column -t
    snd_hda_codec_hdmi 49263 1
    snd_hda_intel 26387 2
    snd_hda_controller 26857 1 snd_hda_intel
    snd_oxygen 23783 2
    snd_hda_codec 112621 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_controller
    snd_oxygen_lib 36709 1 snd_oxygen
    snd_hwdep 17244 1 snd_hda_codec
    snd_mpu401_uart 13507 1 snd_oxygen_lib
    snd_rawmidi 26806 1 snd_mpu401_uart
    snd_seq_device 13307 1 snd_rawmidi
    snd_pcm 88779 5 snd_hda_codec_hdmi,snd_oxygen_lib,snd_hda_codec,snd_hda_intel,snd_hda_controller
    snd_timer 26614 1 snd_pcm
    snd 73436 19 snd_oxygen,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_rawmidi,snd_oxygen_lib,snd_hda_codec,snd_hda_intel,snd_mpu401_uart,snd_seq_device
    # journalctl -b | grep -i bluez
    Apr 26 12:13:52 arch1411 dbus[326]: [system] Activating via systemd: service name='org.bluez' unit='dbus-org.bluez.service'
    Apr 26 12:13:52 arch1411 dbus[326]: [system] Successfully activated service 'org.bluez'
    Apr 26 12:14:31 arch1411 /usr/lib/gdm/gdm-x-session[359]: Activating service name='org.bluez.obex'
    Apr 26 12:14:31 arch1411 /usr/lib/gdm/gdm-x-session[359]: Successfully activated service 'org.bluez.obex'
    [root@arch1411 hg1]# journalctl -b | grep -i audio
    Apr 26 12:13:50 arch1411 kernel: snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
    Apr 26 12:13:52 arch1411 rtkit-daemon[432]: Successfully made thread 431 of process 431 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
    Apr 26 12:13:52 arch1411 rtkit-daemon[432]: Successfully made thread 456 of process 431 (/usr/bin/pulseaudio) owned by '1000' RT at priority 5.
    Apr 26 12:13:52 arch1411 rtkit-daemon[432]: Successfully made thread 497 of process 431 (/usr/bin/pulseaudio) owned by '1000' RT at priority 5.
    Apr 26 12:13:52 arch1411 rtkit-daemon[432]: Successfully made thread 498 of process 431 (/usr/bin/pulseaudio) owned by '1000' RT at priority 5.
    Apr 26 15:37:00 arch1411 vlc.desktop[876]: [00007ffabc009ee8] mpgatofixed32 audio converter error: libmad error: bad main_data_begin pointer
    Apr 26 15:37:02 arch1411 vlc.desktop[876]: [00007ffae0c244f8] mpgatofixed32 audio converter error: libmad error: bad main_data_begin pointer
    # systemctl status pulseaudio.service
    ● pulseaudio.service
    Loaded: not-found (Reason: No such file or directory)
    Active: inactive (dead)
    # systemctl start pulseaudio.service
    Failed to start pulseaudio.service: Unit pulseaudio.service failed to load: No such file or directory.
    Should I proceed per https://bbs.archlinux.org/viewtopic.php?id=149501 and remove pulseaudio daemon from the /etc/rc.conf file?
    Last edited by bbarcher (2015-05-01 07:42:36)

    systemctl --all --no-pager|grep -i pulse
    returns nothing.
    Thank you for your input, V1del.
    $ pacmd list-cards
    2 card(s) available.
    index: 0
    name: <alsa_card.pci-0000_01_00.1>
    driver: <module-alsa-card.c>
    owner module: 6
    properties:
    alsa.card = "0"
    alsa.card_name = "HDA ATI HDMI"
    alsa.long_card_name = "HDA ATI HDMI at 0xfd7fc000 irq 30"
    alsa.driver_name = "snd_hda_intel"
    device.bus_path = "pci-0000:01:00.1"
    sysfs.path = "/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card0"
    device.bus = "pci"
    device.vendor.id = "1002"
    device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
    device.product.id = "aa88"
    device.product.name = "Barts HDMI Audio [Radeon HD 6800 Series]"
    device.string = "0"
    device.description = "Barts HDMI Audio [Radeon HD 6800 Series]"
    module-udev-detect.discovered = "1"
    device.icon_name = "audio-card-pci"
    profiles:
    output:hdmi-stereo: Digital Stereo (HDMI) Output (priority 5400, available: unknown)
    output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (priority 300, available: unknown)
    output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (priority 300, available: unknown)
    off: Off (priority 0, available: unknown)
    active profile: <output:hdmi-stereo>
    sinks:
    alsa_output.pci-0000_01_00.1.hdmi-stereo/#0: Barts HDMI Audio [Radeon HD 6800 Series] Digital Stereo (HDMI)
    sources:
    alsa_output.pci-0000_01_00.1.hdmi-stereo.monitor/#0: Monitor of Barts HDMI Audio [Radeon HD 6800 Series] Digital Stereo (HDMI)
    ports:
    hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
    properties:
    device.icon_name = "video-display"
    index: 1
    name: <alsa_card.pci-0000_04_04.0>
    driver: <module-alsa-card.c>
    owner module: 24
    properties:
    alsa.card = "1"
    alsa.card_name = "Xonar DGX"
    alsa.long_card_name = "C-Media Oxygen HD Audio at 0xee00, irq 17"
    alsa.driver_name = "snd_oxygen"
    device.bus_path = "pci-0000:04:04.0"
    sysfs.path = "/devices/pci0000:00/0000:00:05.0/0000:03:00.0/0000:04:04.0/sound/card1"
    device.bus = "pci"
    device.vendor.id = "13f6"
    device.vendor.name = "C-Media Electronics Inc"
    device.product.id = "8788"
    device.product.name = "CMI8788 [Oxygen HD Audio]"
    device.string = "1"
    device.description = "CMI8788 [Oxygen HD Audio]"
    module-udev-detect.discovered = "1"
    device.icon_name = "audio-card-pci"
    profiles:
    input:analog-stereo: Analog Stereo Input (priority 60, available: unknown)
    output:analog-stereo: Analog Stereo Output (priority 6000, available: unknown)
    output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (priority 6060, available: unknown)
    off: Off (priority 0, available: unknown)
    active profile: <output:analog-stereo+input:analog-stereo>
    sinks:
    alsa_output.pci-0000_04_04.0.analog-stereo/#1: CMI8788 [Oxygen HD Audio] Analog Stereo
    sources:
    alsa_output.pci-0000_04_04.0.analog-stereo.monitor/#1: Monitor of CMI8788 [Oxygen HD Audio] Analog Stereo
    alsa_input.pci-0000_04_04.0.analog-stereo/#2: CMI8788 [Oxygen HD Audio] Analog Stereo
    ports:
    analog-input-front-mic: Front Microphone (priority 8500, latency offset 0 usec, available: unknown)
    properties:
    device.icon_name = "audio-input-microphone"
    analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: unknown)
    properties:
    device.icon_name = "audio-input-microphone"
    analog-input-linein: Line In (priority 8100, latency offset 0 usec, available: unknown)
    properties:
    analog-input-aux: Analog Input (priority 8000, latency offset 0 usec, available: unknown)
    properties:
    analog-output-headphones: Headphones (priority 9000, latency offset 0 usec, available: unknown)
    properties:
    device.icon_name = "audio-headphones"
    $ pacmd list-sinks
    2 sink(s) available.
    index: 0
    name: <alsa_output.pci-0000_01_00.1.hdmi-stereo>
    driver: <module-alsa-card.c>
    flags: HARDWARE DECIBEL_VOLUME LATENCY FLAT_VOLUME DYNAMIC_LATENCY
    state: SUSPENDED
    suspend cause: IDLE
    priority: 9050
    volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
    balance 0.00
    base volume: 65536 / 100% / 0.00 dB
    volume steps: 65537
    muted: no
    current latency: 0.00 ms
    max request: 0 KiB
    max rewind: 0 KiB
    monitor source: 0
    sample spec: s16le 2ch 44100Hz
    channel map: front-left,front-right
    Stereo
    used by: 0
    linked by: 0
    configured latency: 0.00 ms; range is 0.50 .. 1999.82 ms
    card: 0 <alsa_card.pci-0000_01_00.1>
    module: 6
    properties:
    alsa.resolution_bits = "16"
    device.api = "alsa"
    device.class = "sound"
    alsa.class = "generic"
    alsa.subclass = "generic-mix"
    alsa.name = "HDMI 0"
    alsa.id = "HDMI 0"
    alsa.subdevice = "0"
    alsa.subdevice_name = "subdevice #0"
    alsa.device = "3"
    alsa.card = "0"
    alsa.card_name = "HDA ATI HDMI"
    alsa.long_card_name = "HDA ATI HDMI at 0xfd7fc000 irq 30"
    alsa.driver_name = "snd_hda_intel"
    device.bus_path = "pci-0000:01:00.1"
    sysfs.path = "/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card0"
    device.bus = "pci"
    device.vendor.id = "1002"
    device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
    device.product.id = "aa88"
    device.product.name = "Barts HDMI Audio [Radeon HD 6800 Series]"
    device.string = "hdmi:0"
    device.buffering.buffer_size = "352768"
    device.buffering.fragment_size = "176384"
    device.access_mode = "mmap+timer"
    device.profile.name = "hdmi-stereo"
    device.profile.description = "Digital Stereo (HDMI)"
    device.description = "Barts HDMI Audio [Radeon HD 6800 Series] Digital Stereo (HDMI)"
    alsa.mixer_name = "ATI R6xx HDMI"
    alsa.components = "HDA:1002aa01,00aa0100,00100200"
    module-udev-detect.discovered = "1"
    device.icon_name = "audio-card-pci"
    ports:
    hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
    properties:
    device.icon_name = "video-display"
    active port: <hdmi-output-0>
    * index: 1
    name: <alsa_output.pci-0000_04_04.0.analog-stereo>
    driver: <module-alsa-card.c>
    flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY FLAT_VOLUME DYNAMIC_LATENCY
    state: SUSPENDED
    suspend cause: IDLE
    priority: 9059
    volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
    balance 0.00
    base volume: 65536 / 100% / 0.00 dB
    volume steps: 65537
    muted: no
    current latency: 0.00 ms
    max request: 0 KiB
    max rewind: 0 KiB
    monitor source: 1
    sample spec: s16le 2ch 48000Hz
    channel map: front-left,front-right
    Stereo
    used by: 0
    linked by: 0
    configured latency: 0.00 ms; range is 0.50 .. 1837.50 ms
    card: 1 <alsa_card.pci-0000_04_04.0>
    module: 24
    properties:
    alsa.resolution_bits = "16"
    device.api = "alsa"
    device.class = "sound"
    alsa.class = "generic"
    alsa.subclass = "generic-mix"
    alsa.name = "Multichannel"
    alsa.id = "Multichannel"
    alsa.subdevice = "0"
    alsa.subdevice_name = "subdevice #0"
    alsa.device = "0"
    alsa.card = "1"
    alsa.card_name = "Xonar DGX"
    alsa.long_card_name = "C-Media Oxygen HD Audio at 0xee00, irq 17"
    alsa.driver_name = "snd_oxygen"
    device.bus_path = "pci-0000:04:04.0"
    sysfs.path = "/devices/pci0000:00/0000:00:05.0/0000:03:00.0/0000:04:04.0/sound/card1"
    device.bus = "pci"
    device.vendor.id = "13f6"
    device.vendor.name = "C-Media Electronics Inc"
    device.product.id = "8788"
    device.product.name = "CMI8788 [Oxygen HD Audio]"
    device.string = "hw:1"
    device.buffering.buffer_size = "352800"
    device.buffering.fragment_size = "352800"
    device.access_mode = "mmap+timer"
    device.profile.name = "analog-stereo"
    device.profile.description = "Analog Stereo"
    device.description = "CMI8788 [Oxygen HD Audio] Analog Stereo"
    alsa.mixer_name = "CMI8786"
    alsa.components = "CS4245 CMI8786"
    module-udev-detect.discovered = "1"
    device.icon_name = "audio-card-pci"
    ports:
    analog-output-headphones: Headphones (priority 9000, latency offset 0 usec, available: unknown)
    properties:
    device.icon_name = "audio-headphones"
    active port: <analog-output-headphones>
    After all of the recommended solutions from the wiki I still get
    $ systemctl status pulseaudio.service
    ● pulseaudio.service
    Loaded: not-found (Reason: No such file or directory)
    Active: inactive (dead)
    $ pulseaudio -vvvv
    I: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
    I: [pulseaudio] main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted
    D: [pulseaudio] core-rtclock.c: Timer slack is set to 50 us.
    D: [pulseaudio] core-util.c: RealtimeKit worked.
    I: [pulseaudio] core-util.c: Successfully gained nice level -11.
    I: [pulseaudio] main.c: This is PulseAudio 6.0
    D: [pulseaudio] main.c: Compilation host: x86_64-unknown-linux-gnu
    D: [pulseaudio] main.c: Compilation CFLAGS: -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector-strong --param=ssp-buffer-size=4 -Wall -W -Wextra -Wno-long-long -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing -Wwrite-strings -Wno-unused-parameter -ffast-math -fno-common -fdiagnostics-show-option -fdiagnostics-color=auto
    D: [pulseaudio] main.c: Running on host: Linux x86_64 3.19.3-3-ARCH #1 SMP PREEMPT Wed Apr 8 14:10:00 CEST 2015
    D: [pulseaudio] main.c: Found 6 CPUs.
    I: [pulseaudio] main.c: Page size is 4096 bytes
    D: [pulseaudio] main.c: Compiled with Valgrind support: no
    D: [pulseaudio] main.c: Running in valgrind mode: no
    D: [pulseaudio] main.c: Running in VM: no
    D: [pulseaudio] main.c: Optimized build: yes
    D: [pulseaudio] main.c: FASTPATH defined, only fast path asserts disabled.
    I: [pulseaudio] main.c: Machine ID is d36c9fa4b78f4c8cae7f7ad7897683e3.
    I: [pulseaudio] main.c: Session ID is c1.
    I: [pulseaudio] main.c: Using runtime directory /run/user/1000/pulse.
    I: [pulseaudio] main.c: Using state directory /home/hg1/.config/pulse.
    I: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-6.0/modules.
    I: [pulseaudio] main.c: Running in system mode: no
    E: [pulseaudio] pid.c: Daemon already running.
    E: [pulseaudio] main.c: pa_pid_file_create() failed.
    Last edited by bbarcher (2015-04-27 19:16:41)

Maybe you are looking for