W520 not charging while in docking station

Hi
I've got a W520. When connected to the docking station it shows charging in the power manager, but the battery is unloading at the same time, so it says it's charging the battery but it really doesn't. I tried to clean the contacts but it didn't change. I'm using the 170W AC adapter and if connected directly to the notebook the battery is charging and it works. Any help would be greatly appreciated. Thank you.
/C
PS I have all the newest updates. I did install a BIOS update, and even a battery update some days ago. After that everything was still fine. The problem occured only yesterday. I also restored the bios defaults, no change.

IMO, the sound probably isn't a good sign. Maybe a contact is subpar and zapping?
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Similar Messages

  • Not charging unless on docking station

    my son's 30 gig won't charge on the regular charger...will only chage on the docking station....and then can't get it to shut off....please help
    ipod 30 gig   Windows XP  

    Fair enough. It's sad that I used to be able to do this though and now I've erased my music on my iPhone! I need it synced to my work computer, but all my music is on my personal computer. 
    But this also doesn't answer the question why my iPhone 5, which has been reset and only synced to my main PC, is not being recognized by my main computer when it's being used as a laptop. As soon as I am back in the office using the docking station, it recognizes it and I am able to sync, charge, etc.

  • Ipod touch 3rd generation is not charging in Bose Docking station. How to solve this problem ?

    My ipod touch 3rd generation is not charging in the Bose Docking station (manufactured 2005). How to solve this problem ? SOftware required or hardware adapter required ? Thanx

    - Is the iPod fully seated in the dock?
    - Does Bose say the dock is compatible with your model iPod and it iOS.
    - Did it every work?
    - Some users have reported that their iPod did not fully work with their dock after updating the iOS on the iPod.
    There or no setting for docks.

  • IPod Charges on a Docking Station but not via USB

    Bit of an odd one this, I have been living with it for a good many years, however now as I have discovrered the usefullness of this forum I will ask for some advice on the cause of this.
    Simply my iPod will not charge when connected to usb, eg charger, from the computer. When connected to a docking station that runs off mains power it will charge. It holds the charge well.
    The problm first started when I plugged it into a faulty USB port. The keyway was broken so I managed to insert the connector the wrong way round. This messed up the iPod and I wasn't able to get it working again untill I got it home and connected it up to my computer. From this point onwards it has not charged via usb.
    Naturaly I would have thought the Battery, or possibly some charging unit to be at fault in this, however as it depends on how I go about charging it, I am unsure as to what it would be.
    Any thoughts?

    The 5th generation iPod had two sets of power input pins on the dock connector. One set is for USB power (+5V) while the other set is for Firewire connections (+12V and up), a hold over from when all iPods could charge and sync via a Firewire connection. The 5th generation could only sync via USB but Apple left the charging ability from Firewire connections to allow the iPod to be backwards compatible with all the various chargers and docks already "in the field". Back then, almost all docks used the Firewire pins for inputting charging voltage (usually +12V) so they would be backward compatible with all previous iPods.
    Sooooo, what has probably happened is when you plugged in the USB cord backward with your iPod, you damaged the input circuitry of the iPod for the USB voltage pins (perhaps a diode or resistor burned up) and now you can no longer have input on those pins. However your Firewire connection is still fine. So when you plug into your old dock which still supports Firewire charging you can charge your iPod. Note that almost all newer docks no longer have the Firewire pin connections and will all charge via USB only. So your iPod will not charge on new docks.
    I hope that answers your question,
    Patrick

  • My ipod will only charge on the docking station. says it has a full charge but when I take it off the docking station it says battery is low so I've plugged it into the usb and plugged it into my wall outlet but it is still not charging. Help?

    my ipod will only charge on the docking station. says it has a full charge but when I take it off the docking station it says battery is low so I've plugged it into the usb and plugged it into my wall outlet but it is still not charging. I'm not sure what generation it is, its an 80GB. Help?

    The battery is possibly unable to take as much power as a normal battery. It may need a replacement battery.

  • My iphone 4s doent want to play or charge on yamaha docking station

    my iphone 4s doent want to play or charge on yamaha docking station, it works fine with the ipod cable when connected to the pc or charger, any suggestions

    Sounds like you have a Windows computer. See this support document for help with iTunes not recognizing the iPhone.  iOS: Device not recognized in iTunes for Windows

  • My sons iPod touch stopped working, it won't charge in a docking station and the computer/itunes won't recognize it when connected.  We have tried holding the power and home button at the same time for several seconds, and the screen still stays black

    My sons iPod touch stopped working, it won't charge in a docking station and the computer/itunes won't recognize it when connected.  We have tried holding the power and home button at the same time for several seconds, and the screen still stays black.  Thanks!

    Hello skdog I possibly think your ipod touch is black because it has not charged. If your dock is broken it might just mean the dock will be broken and so might be the USB port. You should see an Apple shop nearby and hand it over and see what they can do. I hope this information works!

  • IPhone Not Charging While On A Call

    My iPhone 3G (currently running 3.0) refuses to properly charge while I am on a call. I used to be able to talk and charge at the same time, but lately, it shows the 'charging' symbol for a while and then just switches to 'connected'. The first time it did this, I realized too late and was left with a long and boring commute to work.
    I am quite sure it has nothing to do with the update to 3.0, because it started doing this a day or two before I made the upgrade.
    I usually connect to my laptop when charging, but I also tried connecting via the wall charger, which resulted in the same problem. I don't think it's a problem with the cord I use; I tried it with my Dad's too and it does the same thing.
    The moment I hang up, though, I am able to charge my phone with no interruptions. It continuously shows the charging symbol without randomly switching to just connected.
    I have a habit of making long, long phone calls and I like to have a fully charged phone when I leave for work or whatever. Does anyone know what the problem is/might/could be and/or how I could fix it?
    Thanks.
    Note: I was unsure under which topic this issue would be most appropriate and decided this was the best one. Please don't flame me if I'm wrong.

    I've noticed that while I'm streaming content on the 3G network my phone will not charge either.. Even while connected to my laptop it will not charge while streaming. I believe this may have to do with the 3G bandwidth.. Try making your calls while 3G is turned off.. I think it will charge simultaneously and I'm curious to know if this will make a difference.

  • Battery charges when asleep but will NOT charge while awake

    Hello -
    By battery will charge when off/asleep but will not charge while awake. It just slowly drains to nothing and dies even though adapter is plugged in. magsafe adapter light is green when open/on and orange when off/asleep and lights on battery indicate charging while in the latter state. still using stock battery that came with computer when I got it a few years ago, so it's not new by any means, but when fully charged lasts as long as it used to. I would think maybe charger is issue, but it DOES charge, just not while awake. not sure why computer wouldn't still work correctly while plugged in if in battery indicator it says power source is "power adapter," but its not. I have tried resetting PMU and calibrating battery. the combo of the two seemed to work when having issue a few months ago, but it just started doing it again. frustrating because once it dies I have to wait several hours until its fully charged again, so it cramps the workflow... any ideas? battery info from profiler below.
    Cheers,
    Ian
    Battery Information:
    Model Information:
    Serial Number: DP-ASMB013-3556-2063
    Manufacturer: DP
    Device name: ASMB013
    Pack Lot Code: 0001
    PCB Lot Code: 0000
    Firmware Version: 0102
    Hardware Revision: 0300
    Cell Revision: 0100
    Charge Information:
    Charge remaining (mAh): 81
    Fully charged: No
    Charging: No
    Full charge capacity (mAh): 4571
    Health Information:
    Cycle count: 827
    Condition: Good
    Battery Installed: Yes
    Amperage (mA): -1134
    Voltage (mV): 10921
    System Power Settings:
    AC Power:
    System Sleep Timer (Minutes): 60
    Disk Sleep Timer (Minutes): 10
    Display Sleep Timer (Minutes): 20
    Automatic Restart On Power Loss: No
    Wake On AC Change: No
    Wake On Clamshell Open: Yes
    Wake On LAN: Yes
    Display Sleep Uses Dim: Yes
    Battery Power:
    System Sleep Timer (Minutes): 5
    Disk Sleep Timer (Minutes): 10
    Display Sleep Timer (Minutes): 1
    Wake On AC Change: No
    Wake On Clamshell Open: Yes
    Display Sleep Uses Dim: Yes
    Reduce Brightness: Yes
    Hardware Configuration:
    UPS Installed: No
    AC Charger Information:
    Connected: Yes
    Charging: No

    Scott - Your answer ultimately led me to the answer, albeit months later, after much internal deliberation and some trial and error... thanks!
    Ruled out battery (as crazy as that sounds - it's had a bajillion cycles) as it didn't make sense that battery would charge but wouldn't work while awake. I have a friend whose battery is completely shot and his still works as long as magsafe is plugged in, and mine wouldn't even do that. tried another adapter and that worked. then tried mine in a different plug. so in the end, turns out I had a bum powerstrip... mag safe / battery recharge works properly when just plugged in somewhere different.
    So no need to buy a new charger or battery (yet!)
    thanks to all,
    Ian

  • Hi i need advise  , my new Iphone 6 Plus 16GB under warranty battery is not charging while plugged tested

    Hi    I m  new  registered to this community chat as i need help from your kind adv  . i  seek  advise on my  under warranty Apple Iphone 6 plus 16GB  battery is not charging while plug tested and was asked to surrender my phone to Maxi  as they said since  phone  shutdown no power  and they need to send back to Apple for rectified and  i need to wait for  `14 days  for outcome .   
    Today is  at  almost reach 14 days  and i have not  hear from   Maxis Mobile service Sdn Bhd in Mid Valley Garden . 
    What is the  Warranty term of  Apple Iphone  6 Plus .       some told me  i should have the replacement on the spot  once rectified that s phone hardware problem  .
    I need help  as  calling  Maxi  Garden  te;  2287 5603  always no reply  and calling the person handled my case  no  responding ??
    Shirley Tan

    See this -> http://www.apple.com/support/iphone/repair/

  • Why is it that my ipad 3rd gen does not charge while connected to my laptop

    my ipad 3rd gen will not charge while connected to my laptop, just beside the battery meter it states not charging.

    Beacause the USB port of most computers don't supply sufficient current to properly charge it. It is best to charge it using the supplied power supply.

  • My ipad is not charging while connected to any device via usb cable

    my ipad is not charging while connected to any device via usb cable

    If you mean that you've connected it to a computer's USB port then a lot of computers don't provide enough power to their USB ports to charge the iPad at a sufficient rate - it may still be charging slowly, and should be a bit quicker if the iPad's screen is off (if you leave it for a while and then disconnect it from your computer you may find that it's battery percentage has gone up). The wall charger is usually the most efficient way to charge the iPad.

  • 6th generation nano not compatible w/Bose docking station

    My 6th generation nano is not compatible with Bose docking station. Is there a solution?

    Only Apple knows what the future iOS updates will bring and I have not heard of anything.

  • Macbook 13.3 with new battery and new magsafe adaptor will not charge above 80% no indicator light on charger display states "not charging" while attached to charger

    macbook 13.3 with new battery and new magsafe adaptor will not charge above 80% no indicator light on charger, display states "not charging" while attached to charger

    rgregoryadams wrote:
    macbook 13.3 with new battery and new magsafe adaptor will not charge above 80% no indicator light on charger, display states "not charging" while attached to charger
    You'll want to reset your SMC (System Management Controller). Instructions are simple:
    http://support.apple.com/kb/ht3964

  • W520 dimensions while in Docking station

    Hello everyone,   Can anyone tell me what the dimensions are for the W520 as it sits in its docking station.  Can't find it anywhere.   Appreciate your help.   Cheers!

    ThorsHammer wrote:
    Just add about 2 inches to the side and back.
    Two incheds on the left side for sure. The 9-cell battery sticks out more than the back of the docking station in the rear.
    W520, i7-2820QM, BIOS 1.42, 1920x1080 FHD, 32 GB RAM, 2000M NVIDIA GPU, Samsung 850 Pro 1TB SSD, Crucial M550 mSata 512GB, WD 2TB USB 3.0, eSata Plextor PX-LB950UE BluRay
    W520, i7-2760QM, BIOS 1.42 1920x1080 FHD, 32 GB RAM, 1000M NVIDIA GPU, Crucial M500 480GB mSata SSD, Hitachi 500GB HDD, WD 2TB USB 3.0

Maybe you are looking for

  • IDES system copy ..error during IMPORT_ABAP..unable to create indexes

    Hi all, I am doing a IDES system copy. I ran the report SMIGR_CREATE_DLL , the export activities have been completed successfully as well on the source system. Now on the target system, during the import, I am getting the following error in the log f

  • FCP 7 Won't Install (Overwritten by X)

    I accidentally overwrote my FCP 7 app when installing FCP X. I have the installation disks for FCS 7, but when I put the disk into my Mac Pro, it ejects itself from both disk drives!! Does anyone know why? I'll call Apple tomorrow to try to get help.

  • Since I installed mountain lion pages hangs

    Since I installed Mountain lion Pages hangs every hour or so and needs a force quit. Is this a known problem and is there a fix? Model Name:          MacBook Pro   Model Identifier:          MacBookPro8,2   Processor Name:          Intel Core i7   Pr

  • Lost everything!!!!

    so i updated to new software and now itunes wont even recognise my iphone- have also lost all contacts, photos, music everything!! any idea how i can get computer to recognise it?

  • Variable Popup window depends on PC

    Hello this is Calvin from Korea. There are some queries with exit variable in our system and we faced some weird problem. We need to choose variable to execute this kind of query and the popup window is supposed to appear automatically. The problem i